# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Tue Feb 24 12:36:41 EST 1998 [metaconfig 3.0 PL70]
+# Generated on Thu Oct 22 10:24:53 EET DST 1998 [metaconfig 3.0 PL70]
+# (with additional metaconfig patches by jhi@iki.fi)
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
p_=\;
PATH=`cmd /c "echo %PATH%" | tr '\\\\' / `
OS2_SHELL=`cmd /c "echo %OS2_SHELL%" | tr '\\\\' / | tr '[A-Z]' '[a-z]'`
- elif test -n "$DJDIR"; then
+ elif test -n "$DJGPP"; then
p_=\;
fi
fi
fi
case "$inksh/$needksh" in
/[a-z]*)
- unset ENV
+ ENV=''
changesh=true
reason="$needksh"
;;
;;
esac
+: if needed set CDPATH to a harmless value that is not chatty
+: avoid bash 2.02 problems with empty CDPATH.
+case "$CDPATH" in
+'') ;;
+*) case "$SHELL" in
+ *bash*) CDPATH='.' ;;
+ *) CDPATH='' ;;
+ esac
+ ;;
+esac
: Configure runs within the UU subdirectory
test -d UU || mkdir UU
-unset CDPATH
cd UU && rm -f ./*
dynamic_ext=''
extensions=''
known_extensions=''
+nonxs_ext=''
static_ext=''
useopcode=''
useposix=''
expr=''
find=''
flex=''
-gcc=''
grep=''
gzip=''
inews=''
mkdir=''
more=''
mv=''
+nm=''
nroff=''
perl=''
pg=''
tail=''
tar=''
tbl=''
+tee=''
test=''
touch=''
tr=''
path_sep=''
afs=''
alignbytes=''
+ansi2knr=''
archlib=''
archlibexp=''
d_archlib=''
bin=''
binexp=''
installbin=''
-bincompat3=''
-d_bincompat3=''
byteorder=''
cc=''
gccversion=''
cpprun=''
cppstdin=''
d_access=''
+d_accessx=''
d_alarm=''
d_attribut=''
d_bcmp=''
d_dlsymun=''
d_dosuid=''
d_suidsafe=''
+d_drand48proto=''
d_dup2=''
+d_eaccess=''
+d_endgrent=''
+d_endhent=''
+d_endnent=''
+d_endpent=''
+d_endpwent=''
+d_endsent=''
d_fchmod=''
d_fchown=''
d_fcntl=''
d_flexfnam=''
d_flock=''
d_fork=''
+d_fseeko=''
d_fsetpos=''
+d_ftello=''
d_ftime=''
d_gettimeod=''
d_Gconvert=''
+d_getgrent=''
d_getgrps=''
d_gethbyaddr=''
d_gethbyname=''
d_gethname=''
d_phostname=''
d_uname=''
+d_gethostprotos=''
d_getlogin=''
d_getnbyaddr=''
+d_getnbyname=''
+d_getnent=''
+d_getnetprotos=''
+d_getpent=''
d_getpgid=''
d_getpgrp2=''
d_bsdgetpgrp=''
d_getpgrp=''
d_getppid=''
d_getprior=''
+d_getpbyname=''
+d_getpbynumber=''
+d_getprotoprotos=''
+d_getpwent=''
+d_getsent=''
+d_getservprotos=''
+d_getsbyname=''
+d_getsbyport=''
d_gnulibc=''
d_htonl=''
d_inetaton=''
d_isascii=''
d_killpg=''
+d_lchown=''
d_link=''
d_locconv=''
d_lockf=''
+d_longdbl=''
+longdblsize=''
+d_longlong=''
+longlongsize=''
d_lstat=''
d_mblen=''
d_mbstowcs=''
d_portable=''
d_pthread_yield=''
d_sched_yield=''
+sched_yield=''
d_pthreads_created_joinable=''
d_readdir=''
d_rewinddir=''
d_semop=''
d_setegid=''
d_seteuid=''
+d_setgrent=''
d_setgrps=''
+d_sethent=''
d_setlinebuf=''
d_setlocale=''
+d_setnent=''
+d_setpent=''
d_setpgid=''
d_setpgrp2=''
d_bsdsetpgrp=''
d_setpgrp=''
d_setprior=''
+d_setpwent=''
d_setregid=''
d_setresgid=''
d_setresuid=''
d_setreuid=''
d_setrgid=''
d_setruid=''
+d_setsent=''
d_setsid=''
+d_setvbuf=''
d_sfio=''
usesfio=''
d_shm=''
d_truncate=''
d_tzname=''
d_umask=''
+d_semctl_semid_ds=''
+d_semctl_semun=''
+d_union_semun=''
d_vfork=''
usevfork=''
d_voidsig=''
d_waitpid=''
d_wcstombs=''
d_wctomb=''
+d_dbmclose64=''
+d_dbminit64=''
+d_delete64=''
+d_fetch64=''
+d_firstkey64=''
+d_nextkey64=''
+d_store64=''
dlext=''
cccdlflags=''
ccdlflags=''
ld=''
lddlflags=''
usedl=''
+doublesize=''
+ebcdic=''
fpostype=''
gidtype=''
groupstype=''
h_fcntl=''
h_sysfile=''
+i_arpainet=''
db_hashtype=''
db_prefixtype=''
i_db=''
i_fcntl=''
i_float=''
i_gdbm=''
+d_grpasswd=''
i_grp=''
+d_int64t=''
+i_inttypes=''
i_limits=''
i_locale=''
i_malloc=''
d_pwclass=''
d_pwcomment=''
d_pwexpire=''
+d_pwgecos=''
+d_pwpasswd=''
d_pwquota=''
i_pwd=''
i_sfio=''
i_stdlib=''
i_string=''
strings=''
+i_sysaccess=''
i_sysdir=''
i_sysfile=''
d_voidtty=''
i_sysndir=''
i_sysparam=''
i_sysresrc=''
+i_syssecrt=''
i_sysselct=''
i_sysstat=''
i_systimes=''
intsize=''
longsize=''
shortsize=''
+d_dirent64s=''
+d_flock64s=''
+d_fstat64=''
+d_ftruncate64=''
+d_ino64t=''
+d_lockf64=''
+d_lseek64=''
+d_lstat64=''
+d_off64t=''
+d_open64=''
+d_opendir64=''
+d_readdir64=''
+d_seekdir64=''
+d_stat64=''
+d_telldir64=''
+d_truncate64=''
libc=''
libperl=''
shrpenv=''
loclibpth=''
plibpth=''
xlibpth=''
+ignore_versioned_solibs=''
libs=''
lns=''
+lseeksize=''
lseektype=''
make_set_make=''
d_mymalloc=''
package=''
spackage=''
pager=''
+apiversion=''
patchlevel=''
subversion=''
+version=''
perladmin=''
perlpath=''
pidtype=''
privlib=''
privlibexp=''
prototype=''
+ptrsize=''
+drand01=''
randbits=''
+randfunc=''
+randseedtype=''
+seedfunc=''
installscript=''
scriptdir=''
scriptdirexp=''
+selectminbits=''
selecttype=''
sh=''
sig_name=''
startperl=''
startsh=''
stdchar=''
+d_fgetpos64=''
+d_fopen64=''
+d_freopen64=''
+d_fseek64=''
+d_fseeko64=''
+d_fsetpos64=''
+d_ftell64=''
+d_ftello64=''
+d_tmpfile64=''
sysman=''
+trnl=''
uidtype=''
+archname64=''
+use64bits=''
+usemultiplicity=''
nm_opt=''
nm_so_opt=''
runnm=''
usenm=''
useperlio=''
+d_oldpthreads=''
usethreads=''
incpath=''
mips=''
eunicefix=/etc/unixtovms.exe
fi
+i_whoami=''
+: change the next line if compiling for Xenix/286 on Xenix/386
+xlibpth='/usr/lib/386 /lib/386'
+
+: Possible local library directories to search.
+loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
+loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
+
+: general looking path for locating libraries
+glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
+glibpth="$glibpth /lib /usr/lib $xlibpth"
+glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
+glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
+
+: Private path used by Configure to find libraries. Its value
+: is prepended to libpth. This variable takes care of special
+: machines, like the mips. Usually, it should be empty.
+plibpth=''
+
+: Possible local include directories to search.
+: Set locincpth to "" in a hint file to defeat local include searches.
+locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
+locincpth="$locincpth /opt/gnu/include /usr/GNU/include /opt/GNU/include"
+:
+: no include file wanted by default
+inclwanted=''
+
: list of known cpp symbols, sorted alphabetically
al="AMIX BIT_MSF BSD BSD4_3 BSD_NET2 CMU CRAY DGUX DOLPHIN DPX2"
al="$al GO32 GOULD_PN HP700 I386 I80960 I960 Lynx M68000 M68K MACH"
al="$al SYSTYPE_BSD SYSTYPE_SVR4 SYSTYPE_SYSV Tek4132 Tek4300"
al="$al UMAXV USGr4 USGr4_2 UTEK UTS UTek UnicomPBB UnicomPBD Utek"
al="$al VMS Xenix286"
-al="$al _AIX _AIX32 _AIX370 _AM29000 _COFF _CRAY _CX_UX _EPI"
-al="$al _IBMESA _IBMR2 _M88K _M88KBCS_TARGET"
+al="$al _AIX _AIX32 _AIX370 _AIX41 _AM29000 _COFF _CRAY _CX_UX _EPI"
+al="$al _IBMESA _IBMR2 _M88K _M88KBCS_TARGET _POWER"
al="$al _MIPSEB _MIPSEL _M_COFF _M_I86 _M_I86SM _M_SYS3"
al="$al _M_SYS5 _M_SYSIII _M_SYSV _M_UNIX _M_XENIX _NLS _PGC_ _R3000"
al="$al _SYSTYPE_BSD _SYSTYPE_BSD43 _SYSTYPE_SVR4"
al="$al u3b20d u3b5 ultrix unix unixpc unos vax venix vms"
al="$al xenix z8000"
-i_whoami=''
-: change the next line if compiling for Xenix/286 on Xenix/386
-xlibpth='/usr/lib/386 /lib/386'
-
-: Possible local library directories to search.
-loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
-loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
-
-: general looking path for locating libraries
-glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
-glibpth="$glibpth /lib /usr/lib $xlibpth"
-glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
-glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
-
-: Private path used by Configure to find libraries. Its value
-: is prepended to libpth. This variable takes care of special
-: machines, like the mips. Usually, it should be empty.
-plibpth=''
-
+: Trailing extension. Override this in a hint file, if needed.
+_exe=''
+: Extra object files, if any, needed on this platform.
+archobjs=''
+groupstype=''
: default library list
libswanted=''
+ignore_versioned_solibs=''
: full support for void wanted by default
defvoidused=15
-: Possible local include directories to search.
-: Set locincpth to "" in a hint file to defeat local include searches.
-locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
-locincpth="$locincpth /opt/gnu/include /usr/GNU/include /opt/GNU/include"
-:
-: no include file wanted by default
-inclwanted=''
-
-: Trailing extension. Override this in a hint file, if needed.
-_exe=''
-: Extra object files, if any, needed on this platform.
-archobjs=''
-groupstype=''
: set useposix=false in your hint file to disable the POSIX extension.
useposix=true
: set useopcode=false in your hint file to disable the Opcode extension.
useopcode=true
+: set usemultiplicity on the Configure command line to enable multiplicity.
: set usethreads on the Configure command line to enable threads.
: List of libraries we want.
-libswanted='sfio net socket inet nsl nm ndbm gdbm dbm db malloc dl'
+: If anyone needs -lnet, put it in a hint file.
+libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
libswanted="$libswanted dld ld sun m c cposix posix ndir dir crypt"
libswanted="$libswanted ucb bsd BSD PW x"
: We probably want to search /usr/shlib before most other libraries.
$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Andy Dougherty) at doughera@lafcol.lafayette.edu and
+Please contact me (Jarkko Hietaniemi) at jhi@iki.fi and
we'll try to straighten this all out.
EOM
exit 1
fi
rm -f try
+
+: Save command line options in file UU/cmdline.opt for later use in
+: generating config.sh.
+cat > cmdline.opt <<EOSH
+# Configure command line arguments.
+config_arg0='$0'
+config_args='$*'
+config_argc=$#
+EOSH
+argn=1
+for arg in "$@"; do
+ cat >>cmdline.opt <<EOSH
+config_arg$argn='$arg'
+EOSH
+ argn=`expr $argn + 1`
+done
+
: produce awk script to parse command line options
cat >options.awk <<'EOF'
BEGIN {
CONFIG=true
echo "Doing variable substitutions on .SH files..."
if test -f $src/MANIFEST; then
- set x `awk '{print $1}' <$src/MANIFEST | grep '\.SH'`
+ set x `awk '{print $1}' <$src/MANIFEST | grep '\.SH$'`
else
echo "(Looking for .SH files under the source directory.)"
set x `(cd $src; find . -name "*.SH" -print)`
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (doughera@lafcol.lafayette.edu).
+and contact the author (jhi@iki.fi).
EOM
echo $n "Continue? [n] $c" >&4
fi
rm -f missing x??
+echo " "
+: Find the appropriate value for a newline for tr
+if test -n "$DJGPP"; then
+ trnl='\012'
+fi
+if test X"$trnl" = X; then
+ case "`echo foo|tr '\n' x 2>/dev/null`" in
+ foox) trnl='\n' ;;
+ esac
+fi
+if test X"$trnl" = X; then
+ case "`echo foo|tr '\012' x 2>/dev/null`" in
+ foox) trnl='\012' ;;
+ esac
+fi
+if test X"$trnl" = X; then
+ cat <<EOM >&2
+
+$me: Fatal Error: cannot figure out how to translate newlines with 'tr'.
+
+EOM
+ exit 1
+fi
+
: compute the number of columns on the terminal for proper question formatting
case "$COLUMNS" in
'') COLUMNS='80';;
y)
echo "*** Substitution done -- please confirm."
xxxm="\$ans"
- ans=\`echo $n "\$ans$c" | tr '\012' ' '\`
+ ans=\`echo $n "\$ans$c" | tr '$trnl' ' '\`
xxxm="\$ans"
ans=!
;;
fi
if $needman; then
cat <<EOH
-
+
This installation shell script will examine your system and ask you questions
to determine how the perl5 package should be installed. If you get
stuck on a question, you may use a ! shell escape to start a subshell or
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (doughera@lafcol.lafayette.edu) know how I blew it.
+have, let me (jhi@iki.fi) know how I blew it.
This installation script affects things in two ways:
echo \$thisthing
exit 0
elif test -f \$dir/\$thing.exe; then
- : on Eunice apparently
- echo \$dir/\$thing
+ if test -n "$DJGPP"; then
+ echo \$dir/\$thing.exe
+ else
+ : on Eunice apparently
+ echo \$dir/\$thing
+ fi
exit 0
fi
;;
cp
echo
expr
-find
grep
ls
make
egrep
gzip
less
-line
ln
more
+nm
nroff
-perl
pg
-sendmail
+tee
test
uname
zip
: see whether [:lower:] and [:upper:] are supported character classes
echo " "
-up='[A-Z]'
-low='[a-z]'
case "`echo AbyZ | $tr '[:lower:]' '[:upper:]' 2>/dev/null`" in
ABYZ)
echo "Good, your tr supports [:lower:] and [:upper:] to convert case." >&4
up='[:upper:]'
low='[:lower:]'
;;
+*) # There is a discontinuity in EBCDIC between 'I' and 'J'
+ # (0xc9 and 0xd1), therefore that is a nice testing point.
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | $tr '[I-J]' '[i-j]' 2>/dev/null`" in
+ ij) up='[A-Z]'
+ low='[a-z]'
+ ;;
+ esac
+ fi
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | $tr I-J i-j 2>/dev/null`" in
+ ij) up='A-Z'
+ low='a-z'
+ ;;
+ esac
+ fi
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | od -x 2>/dev/null`" in
+ *C9D1*|*c9d1*)
+ echo "Hey, this might be EBCDIC." >&4
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | $tr '[A-IJ-RS-Z]' '[a-ij-rs-z]' 2>/dev/null`" in
+ ij) up='[A-IJ-RS-Z]'
+ low='[a-ij-rs-z]'
+ ;;
+ esac
+ fi
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | $tr A-IJ-RS-Z a-ij-rs-z 2>/dev/null`" in
+ ij) up='A-IJ-RS-Z'
+ low='a-ij-rs-z'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ fi
+esac
+case "`echo IJ | $tr \"$up\" \"$low\" 2>/dev/null`" in
+ij)
+ echo "Using $up and $low to convert case." >&4
+ ;;
*)
- echo "Your tr only supports [a-z] and [A-Z] to convert case." >&4
- ;;
+ echo "I don't know how to translate letters from upper to lower case." >&4
+ echo "Your tr is not acting any way I know of." >&4
+ exit 1
+ ;;
esac
: set up the translation script tr, must be called with ./tr of course
cat >tr <<EOSC
case "$config_sh" in
'')
myuname=`( ($uname -a) 2>/dev/null || hostname) 2>&1`
+# tr '[A-Z]' '[a-z]' would not work in EBCDIC
+# because the A-Z/a-z are not consecutive.
myuname=`echo $myuname | $sed -e 's/^[^=]*=//' -e 's/\///g' | \
- ./tr '[A-Z]' '[a-z]' | tr '\012' ' '`
+ ./tr '[A-Z]' '[a-z]' | $tr $trnl ' '`
newmyuname="$myuname"
dflt=n
case "$knowitall" in
if test ! -f config.sh; then
$cat <<EOM
-First time through, eh? I have some defaults handy for the following systems:
+First time through, eh? I have some defaults handy for some systems
+that need some extra help getting the Configure answers right:
EOM
(cd $src/hints; ls -C *.sh) | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to doughera@lafcol.lafayette.edu
+ : tests or hints, please send them to jhi@iki.fi
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
$test -d /usr/apollo/bin && osname=apollo
$test -f /etc/saf/_sactab && osname=svr4
$test -d /usr/include/minix && osname=minix
- if $test -d /MachTen; then
+ if $test -d /MachTen -o -d /MachTen_Folder; then
osname=machten
if $test -x /sbin/version; then
osvers=`/sbin/version | $awk '{print $2}' |
osvers="$2.$3"
fi
fi
+ $test -f /sys/posix.dll &&
+ $test -f /usr/bin/what &&
+ set X `/usr/bin/what /sys/posix.dll` &&
+ $test "$3" = UWIN &&
+ osname=uwin &&
+ osvers="$5"
if $test -f $uname; then
set X $myuname
shift
fi
fi
;;
+ pc*)
+ if test -n "$DJGPP"; then
+ osname=dos
+ osvers=djgpp
+ fi
+ ;;
esac
case "$1" in
osvers="$3" ;;
genix) osname=genix ;;
hp*) osname=hpux
- case "$3" in
- *.08.*) osvers=9 ;;
- *.09.*) osvers=9 ;;
- *.10.*) osvers=10 ;;
- *) osvers="$3" ;;
- esac
+ osvers=`echo "$3" | $sed 's,.*\.\([0-9]*\.[0-9]*\),\1,'`
;;
irix*) osname=irix
case "$3" in
*) osvers="$3" ;;
esac
;;
- netbsd*) osname=netbsd
+ MiNT) osname=mint
+ ;;
+ netbsd*) osname=netbsd
osvers="$3"
;;
news-os) osvers="$3"
bsd386) osname=bsd386
osvers=`$uname -r`
;;
+ POSIX-BC | posix-bc ) osname=posix-bc
+ osvers="$3"
+ ;;
powerux | power_ux | powermax_os | powermaxos | \
powerunix | power_unix) osname=powerux
osvers="$3"
*) if test -f /etc/systemid; then
osname=sco
set `echo $3 | $sed 's/\./ /g'` $4
- if $test -f sco_$1_$2_$3.sh; then
+ if $test -f $src/hints/sco_$1_$2_$3.sh; then
osvers=$1.$2.$3
- elif $test -f sco_$1_$2.sh; then
+ elif $test -f $src/hints/sco_$1_$2.sh; then
osvers=$1.$2
- elif $test -f sco_$1.sh; then
+ elif $test -f $src/hints/sco_$1.sh; then
osvers=$1
fi
else
set X $myuname
osname=os2
osvers="$5"
- if test -n "$DJDIR"; then
- osname=dos
- osvers=djgpp
- fi
fi
fi
esac
;;
esac
+ if $test -f Policy.sh ; then
+ case "$dflt" in
+ *Policy*) ;;
+ none) dflt="Policy" ;;
+ *) dflt="Policy $dflt" ;;
+ esac
+ fi
;;
*)
dflt=`echo $hintfile | $sed 's/\.sh$//'`
;;
esac
+ if $test -f Policy.sh ; then
+ $cat <<EOM
+
+There's also a Policy hint file available, which should make the
+site-specific (policy) questions easier to answer.
+EOM
+
+ fi
+
$cat <<EOM
You may give one or more space-separated answers, or "none" if appropriate.
-If your OS version has no hints, DO NOT give a wrong version -- say "none".
+A well-behaved OS will have no hints, so answering "none" or just "Policy"
+is a good thing. DO NOT give a wrong version.
EOM
+
rp="Which of these apply, if any?"
. UU/myread
tans=$ans
for file in $tans; do
- if $test -f $src/hints/$file.sh; then
+ if $test X$file = XPolicy -a -f Policy.sh; then
+ . Policy.sh
+ $cat Policy.sh >> UU/config.sh
+ elif $test -f $src/hints/$file.sh; then
. $src/hints/$file.sh
$cat $src/hints/$file.sh >> UU/config.sh
elif $test X$tans = X -o X$tans = Xnone ; then
esac
set usethreads
eval $setvar
+: Look for a hint-file generated 'call-back-unit'. Now that the
+: user has specified if a threading perl is to be built, we may need
+: to set or change some other defaults.
+if $test -f usethreads.cbu; then
+ . ./usethreads.cbu
+fi
+case "$d_oldpthreads" in
+'') : Configure tests would be welcome here. For now, assume undef.
+ val="$undef" ;;
+*) val="$d_oldpthreads" ;;
+esac
+set d_oldpthreads
+eval $setvar
+
+cat <<EOM
+
+Perl can be built so that multiple Perl interpreters can coexist
+within the same Perl executable. To do so, Configure must be run with
+-Dusemultiplicity.
+
+Normally you do not need this and you should answer no.
+
+EOM
+case "$usemultiplicity" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Build Perl for multiplicity?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usemultiplicity
+eval $setvar
+
+cat <<EOM
+
+Perl can be built to take advantage of explicit 64-bit interfaces,
+on some systems. To do so, Configure must be run with -Duse64bits.
+
+If this doesn't make any sense to you, just accept the default 'n'.
+EOM
+case "$use64bits" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Try to use explicit 64-bit interfaces, if available?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
+ ;;
+*)
+ val="$undef"
+ ;;
+esac
+set use64bits
+eval $setvar
+
+archname64=''
: determine the architecture name
echo " "
archname=''
;;
esac
+myarchname="$tarch"
case "$archname" in
'') dflt="$tarch";;
*) dflt="$archname";;
esac
rp='What is your architecture name'
. ./myread
+archname="$ans"
case "$usethreads" in
-$define) echo "Threads selected." >&4
- case "$ans" in
- *-thread) echo "...and architecture name already ends in -thread." >&4
- archname="$ans"
- ;;
- *) archname="$ans-thread"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-*) archname="$ans" ;;
+$define)
+ echo "Threads selected." >&4
+ case "$archname" in
+ *-thread*) echo "...and architecture name already has -thread." >&4
+ ;;
+ *) archname="$archname-thread"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
esac
-myarchname="$tarch"
+case "$usemultiplicity" in
+$define)
+ echo "Multiplicity selected." >&4
+ case "$archname" in
+ *-multi*) echo "...and architecture name already has -multi." >&4
+ ;;
+ *) archname="$archname-multi"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$use64bits" in
+$define)
+ echo "Explicit 64-bitness selected." >&4
+ case "$archname64" in
+ '')
+ ;;
+ *)
+ case "$archname" in
+ *-$archname64*) echo "...and architecture name already has $archname64." >&4
+ ;;
+ *) archname="$archname-$archname64"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+ esac
+esac
+
: is AFS running?
echo " "
case "$afs" in
case "$fn" in
*\(*)
- expr $fn : '.*(\(.*\)).*' | tr ',' '\012' >getfile.ok
+ expr $fn : '.*(\(.*\)).*' | tr ',' $trnl >getfile.ok
fn=`echo $fn | sed 's/(.*)//'`
;;
esac
esac;;
esac'
+: set the base revision
+baserev=5.0
+
+: get the patchlevel
+echo " "
+echo "Getting the current patchlevel..." >&4
+if $test -r $rsrc/patchlevel.h;then
+ patchlevel=`awk '/define[ ]+PATCHLEVEL/ {print $3}' $rsrc/patchlevel.h`
+ subversion=`awk '/define[ ]+SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+else
+ patchlevel=0
+ subversion=0
+fi
+$echo $n "(You have $package" $c
+case "$package" in
+"*$baserev") ;;
+*) $echo $n " $baserev" $c ;;
+esac
+$echo $n " patchlevel $patchlevel" $c
+test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
+echo ".)"
+
+if test 0 -eq "$subversion"; then
+ version=`LC_ALL=C; export LC_ALL; \
+ echo $baserev $patchlevel | \
+ $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
+else
+ version=`LC_ALL=C; export LC_ALL; \
+ echo $baserev $patchlevel $subversion | \
+ $awk '{ printf "%.5f\n", $1 + $2/1000.0 + $3/100000.0 }'`
+fi
+: Figure out perl API version. Perhaps this should be in patchlevel.h
+if test "$subversion" -lt 50; then
+ apiversion=`LC_ALL=C; export LC_ALL; \
+ echo $baserev $patchlevel | \
+ $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
+else
+ apiversion="$version"
+fi
+
: determine where private library files go
-: Usual default is /usr/local/lib/perl5. Also allow things like
-: /opt/perl/lib, since /opt/perl/lib/perl5 would be redundant.
+: Usual default is /usr/local/lib/perl5/$version.
+: Also allow things like /opt/perl/lib/$version, since
+: /opt/perl/lib/perl5... would be redundant.
case "$prefix" in
-*perl*) set dflt privlib lib ;;
-*) set dflt privlib lib/$package ;;
+*perl*) set dflt privlib lib/$version ;;
+*) set dflt privlib lib/$package/$version ;;
esac
eval $prefixit
$cat <<EOM
installprivlib="$privlibexp"
fi
-: set the base revision
-baserev=5.0
-
-: get the patchlevel
-echo " "
-echo "Getting the current patchlevel..." >&4
-if $test -r $rsrc/patchlevel.h;then
- patchlevel=`awk '/PATCHLEVEL/ {print $3}' $rsrc/patchlevel.h`
- subversion=`awk '/SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
-else
- patchlevel=0
- subversion=0
-fi
-$echo $n "(You have $package" $c
-case "$package" in
-"*$baserev") ;;
-*) $echo $n " $baserev" $c ;;
-esac
-$echo $n " patchlevel $patchlevel" $c
-test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
-echo ".)"
-
: set the prefixup variable, to restore leading tilda escape
prefixup='case "$prefixexp" in
"$prefix") ;;
: determine where public architecture dependent libraries go
set archlib archlib
eval $prefixit
+: privlib default is /usr/local/lib/$package/$version
+: archlib default is /usr/local/lib/$package/$version/$archname
+: privlib may have an optional trailing /share.
+tdflt=`echo $privlib | $sed 's,/share$,,'`
+tdflt=$tdflt/$archname
case "$archlib" in
-'')
- case "$privlib" in
- '') dflt=`./loc . "." $prefixexp/lib /usr/local/lib /usr/lib /lib`
- set dflt
- eval $prefixup
- ;;
- *) if test 0 -eq "$subversion"; then
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel | \
- $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
- else
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel $subversion | \
- $awk '{ printf "%.5f\n", $1 + $2/1000.0 + $3/100000.0 }'`
- fi
- dflt="$privlib/$archname/$version"
+'') dflt=$tdflt
;;
- esac
- ;;
-*)
- dflt="$archlib"
+*) dflt="$archlib"
;;
esac
cat <<EOM
set d_dosuid
eval $setvar
-: determine where public executables go
+: determine where manual pages are on this system
echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
-fi
-bin="$ans"
-binexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-executables reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installbin" in
- '') dflt=`echo $binexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installbin";;
- esac
- fn=de~
- rp='Where will public executables be installed?'
- . ./getfile
- installbin="$ans"
-else
- installbin="$binexp"
-fi
-
-
-: Binary compatibility with 5.003 is not possible with 5.004_50 and later.
-if test $patchlevel -ge 4 -o $subversion -ge 50; then
- val=$undef
-else
- $cat <<EOM
-
-Perl 5.004 can be compiled for binary compatibility with 5.003.
-If you decide to do so, you will be able to continue using any
-extensions that were compiled for Perl 5.003. However, binary
-compatibility forces Perl to expose some of its internal symbols
-in the same way that 5.003 did. So you may have symbol conflicts
-if you embed a binary-compatible Perl in other programs.
-
-EOM
- case "$d_bincompat3" in
- "$undef") dflt=n ;;
- *) dflt=y ;;
- esac
- rp='Binary compatibility with Perl 5.003?'
- . ./myread
- case "$ans" in
- y*) val="$define" ;;
- *) val="$undef" ;;
- esac
-fi
-set d_bincompat3
-eval $setvar
-case "$d_bincompat3" in
-"$define") bincompat3=y ;;
-*) bincompat3=n ;;
-esac
-
-: determine where manual pages are on this system
-echo " "
-case "$sysman" in
-'')
- syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
- syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
- syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
- syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
- sysman=`./loc . /usr/man/man1 $syspath`
- ;;
-esac
-if $test -d "$sysman"; then
- echo "System manual is in $sysman." >&4
-else
- echo "Could not find manual pages in source form." >&4
+case "$sysman" in
+'')
+ syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+ syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
+ syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
+ syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
+ syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
+ sysman=`./loc . /usr/man/man1 $syspath`
+ ;;
+esac
+if $test -d "$sysman"; then
+ echo "System manual is in $sysman." >&4
+else
+ echo "Could not find manual pages in source form." >&4
fi
: see what memory models we can support
Venix systems may wish to put "none" and let the compiler figure things out.
(In the following question multiple model names should be space separated.)
+The default for most systems is "none".
+
EOM
rp="Which memory models are supported?"
. ./myread
esac;;
*) dflt="$cc";;
esac
- $cat <<'EOM'
-On some systems the default C compiler will not resolve multiple global
+ case "$dflt" in
+ *M*) $cat <<'EOM'
+On some older systems the default C compiler will not resolve multiple global
references that happen to have the same name. On some such systems the "Mcc"
command may be used to force these to be resolved. On other systems a "cc -M"
command is required. (Note that the -M flag on other systems indicates a
that instead.
EOM
- rp="What command will force resolution on this system?"
+ ;;
+ esac
+ rp="Use which C compiler?"
. ./myread
cc="$ans"
else
. ./myread
cc="$ans"
fi
+: Look for a hint-file generated 'call-back-unit'. Now that the
+: user has specified the compiler, we may need to set or change some
+: other defaults.
+if $test -f cc.cbu; then
+ . ./cc.cbu
+fi
echo " "
echo "Checking for GNU cc in disguise and/or its version number..." >&4
$cat >gccvers.c <<EOM
;;
esac
+: see how we invoke the C preprocessor
+echo " "
+echo "Now, how can we feed standard input to your C preprocessor..." >&4
+cat <<'EOT' >testcpp.c
+#define ABC abc
+#define XYZ xyz
+ABC.XYZ
+EOT
+cd ..
+if test ! -f cppstdin; then
+ echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+else
+ echo "Keeping your $hint cppstdin wrapper."
+fi
+chmod 755 cppstdin
+wrapper=`pwd`/cppstdin
+ok='false'
+cd UU
+
+if $test "X$cppstdin" != "X" && \
+ $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+then
+ echo "You used to use $cppstdin $cppminus so we'll use that again."
+ case "$cpprun" in
+ '') echo "But let's see if we can live without a wrapper..." ;;
+ *)
+ if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
+ ok='true'
+ else
+ echo "(However, $cpprun $cpplast does not work, let's see...)"
+ fi
+ ;;
+ esac
+else
+ case "$cppstdin" in
+ '') ;;
+ *)
+ echo "Good old $cppstdin $cppminus does not seem to be of any help..."
+ ;;
+ esac
+fi
+
+if $ok; then
+ : nothing
+elif echo 'Maybe "'"$cc"' -E" will work...'; \
+ $cc -E <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
+ $cc -E - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yup, it does."
+ x_cpp="$cc -E"
+ x_minus='-';
+elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
+ $cc -P <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Yipee, that works!"
+ x_cpp="$cc -P"
+ x_minus='';
+elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
+ $cc -P - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "At long last!"
+ x_cpp="$cc -P"
+ x_minus='-';
+elif echo 'No such luck, maybe "'$cpp'" will work...'; \
+ $cpp <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "It works!"
+ x_cpp="$cpp"
+ x_minus='';
+elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
+ $cpp - <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "Hooray, it works! I was beginning to wonder."
+ x_cpp="$cpp"
+ x_minus='-';
+elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
+ $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ x_cpp="$wrapper"
+ x_minus=''
+ echo "Eureka!"
+else
+ dflt=''
+ rp="No dice. I can't find a C preprocessor. Name one:"
+ . ./myread
+ x_cpp="$ans"
+ x_minus=''
+ $x_cpp <testcpp.c >testcpp.out 2>&1
+ if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
+ echo "OK, that will do." >&4
+ else
+echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
+ exit 1
+ fi
+fi
+
+case "$ok" in
+false)
+ cppstdin="$x_cpp"
+ cppminus="$x_minus"
+ cpprun="$x_cpp"
+ cpplast="$x_minus"
+ set X $x_cpp
+ shift
+ case "$1" in
+ "$cpp")
+ echo "Perhaps can we force $cc -E using a wrapper..."
+ if $wrapper <testcpp.c >testcpp.out 2>&1; \
+ $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
+ then
+ echo "Yup, we can."
+ cppstdin="$wrapper"
+ cppminus='';
+ else
+ echo "Nope, we'll have to live without it..."
+ fi
+ ;;
+ esac
+ case "$cpprun" in
+ "$wrapper")
+ cpprun=''
+ cpplast=''
+ ;;
+ esac
+ ;;
+esac
+
+case "$cppstdin" in
+"$wrapper") ;;
+*) $rm -f $wrapper;;
+esac
+$rm -f testcpp.c testcpp.out
+
: Set private lib path
case "$plibpth" in
'') if ./mips; then
esac
for thislib in $libswanted; do
- if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`; $test -f "$xxx"; then
+ if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`;
+ $test -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
echo "Found -l$thislib (shared)."
case " $dflt " in
*"-l$thislib "*);;
*) libs="$ans";;
esac
-: see how we invoke the C preprocessor
-echo " "
-echo "Now, how can we feed standard input to your C preprocessor..." >&4
-cat <<'EOT' >testcpp.c
-#define ABC abc
-#define XYZ xyz
-ABC.XYZ
-EOT
-cd ..
-echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
-chmod 755 cppstdin
-wrapper=`pwd`/cppstdin
-ok='false'
-cd UU
+: determine optimize, if desired, or use for debug flag also
+case "$optimize" in
+' '|$undef) dflt='none';;
+'') dflt='-O';;
+*) dflt="$optimize";;
+esac
+$cat <<EOH
-if $test "X$cppstdin" != "X" && \
- $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
-then
- echo "You used to use $cppstdin $cppminus so we'll use that again."
- case "$cpprun" in
- '') echo "But let's see if we can live without a wrapper..." ;;
- *)
- if $cpprun $cpplast <testcpp.c >testcpp.out 2>&1 && \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "(And we'll use $cpprun $cpplast to preprocess directly.)"
- ok='true'
- else
- echo "(However, $cpprun $cpplast does not work, let's see...)"
- fi
- ;;
- esac
-else
- case "$cppstdin" in
- '') ;;
- *)
- echo "Good old $cppstdin $cppminus does not seem to be of any help..."
- ;;
- esac
-fi
-
-if $ok; then
- : nothing
-elif echo 'Maybe "'"$cc"' -E" will work...'; \
- $cc -E <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -E -" will work...'; \
- $cc -E - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yup, it does."
- x_cpp="$cc -E"
- x_minus='-';
-elif echo 'Nope...maybe "'"$cc"' -P" will work...'; \
- $cc -P <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Yipee, that works!"
- x_cpp="$cc -P"
- x_minus='';
-elif echo 'Nope...maybe "'"$cc"' -P -" will work...'; \
- $cc -P - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "At long last!"
- x_cpp="$cc -P"
- x_minus='-';
-elif echo 'No such luck, maybe "'$cpp'" will work...'; \
- $cpp <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "It works!"
- x_cpp="$cpp"
- x_minus='';
-elif echo 'Nixed again...maybe "'$cpp' -" will work...'; \
- $cpp - <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "Hooray, it works! I was beginning to wonder."
- x_cpp="$cpp"
- x_minus='-';
-elif echo 'Uh-uh. Time to get fancy. Trying a wrapper...'; \
- $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- x_cpp="$wrapper"
- x_minus=''
- echo "Eureka!"
-else
- dflt=''
- rp="No dice. I can't find a C preprocessor. Name one:"
- . ./myread
- x_cpp="$ans"
- x_minus=''
- $x_cpp <testcpp.c >testcpp.out 2>&1
- if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
- echo "OK, that will do." >&4
- else
-echo "Sorry, I can't get that to work. Go find one and rerun Configure." >&4
- exit 1
- fi
-fi
-
-case "$ok" in
-false)
- cppstdin="$x_cpp"
- cppminus="$x_minus"
- cpprun="$x_cpp"
- cpplast="$x_minus"
- set X $x_cpp
- shift
- case "$1" in
- "$cpp")
- echo "Perhaps can we force $cc -E using a wrapper..."
- if $wrapper <testcpp.c >testcpp.out 2>&1; \
- $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1
- then
- echo "Yup, we can."
- cppstdin="$wrapper"
- cppminus='';
- else
- echo "Nope, we'll have to live without it..."
- fi
- ;;
- esac
- case "$cpprun" in
- "$wrapper")
- cpprun=''
- cpplast=''
- ;;
- esac
- ;;
-esac
-
-case "$cppstdin" in
-"$wrapper") ;;
-*) $rm -f $wrapper;;
-esac
-$rm -f testcpp.c testcpp.out
-
-: determine optimize, if desired, or use for debug flag also
-case "$optimize" in
-' '|$undef) dflt='none';;
-'') dflt='-O';;
-*) dflt="$optimize";;
-esac
-$cat <<EOH
-
-Some C compilers have problems with their optimizers. By default, $package
-compiles with the -O flag to use the optimizer. Alternately, you might want
-to use the symbolic debugger, which uses the -g flag (on traditional Unix
-systems). Either flag can be specified here. To use neither flag, specify
-the word "none".
+Some C compilers have problems with their optimizers. By default, $package
+compiles with the -O flag to use the optimizer. Alternately, you might want
+to use the symbolic debugger, which uses the -g flag (on traditional Unix
+systems). Either flag can be specified here. To use neither flag, specify
+the word "none".
EOH
rp="What optimizer/debugger flag should be used?"
: coherency check
echo " "
echo "Checking your choice of C compiler and flags for coherency..." >&4
-set X $cc $optimize $ccflags $ldflags -o try try.c $libs
+$cat > try.c <<'EOF'
+#include <stdio.h>
+main() { printf("Ok\n"); exit(0); }
+EOF
+set X $cc $optimize $ccflags -o try $ldflags try.c $libs
shift
-$cat >try.msg <<EOM
-I've tried to compile and run a simple program with:
+$cat >try.msg <<'EOM'
+I've tried to compile and run the following simple program:
+
+EOM
+$cat try.c
+
+$cat >> try.msg <<EOM
+
+I used the command:
$*
./try
and I got the following output:
EOM
-$cat > try.c <<'EOF'
-#include <stdio.h>
-main() { printf("Ok\n"); exit(0); }
-EOF
dflt=y
-if sh -c "$cc $optimize $ccflags $ldflags -o try try.c $libs" >>try.msg 2>&1; then
+if sh -c "$cc $optimize $ccflags -o try $ldflags try.c $libs" >>try.msg 2>&1; then
if sh -c './try' >>try.msg 2>&1; then
xxx=`./try`
case "$xxx" in
$cat try.msg >&4
case "$knowitall" in
'')
- echo "(The supplied flags might be incorrect with this C compiler.)"
+ echo "(The supplied flags or libraries might be incorrect.)"
;;
*) dflt=n;;
esac
esac
$rm -f try try.* core
-: define a shorthand compile call
-compile='
-mc_file=$1;
-shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file}$_exe $* ${mc_file}.c $libs > /dev/null 2>&1;'
-
+: determine filename position in cpp output
echo " "
-echo "Checking for GNU C Library..." >&4
-cat >gnulibc.c <<EOM
-int
-main()
-{
- return __libc_main();
-}
-EOM
-set gnulibc
-if eval $compile && \
- ./gnulibc | $contains '^GNU C Library' >/dev/null 2>&1; then
- val="$define"
- echo "You are using the GNU C Library"
-else
- val="$undef"
- echo "You are not using the GNU C Library"
-fi
-$rm -f gnulibc*
-set d_gnulibc
-eval $setvar
-
-: see if nm is to be used to determine whether a symbol is defined or not
-case "$usenm" in
-'')
- case "$d_gnulibc" in
- $define)
- dflt=n
- ;;
- *)
- dflt=`egrep 'inlibc|csym' ../Configure | wc -l 2>/dev/null`
- if $test $dflt -gt 20; then
- dflt=y
- else
- dflt=n
+echo "Computing filename position in cpp output for #include directives..." >&4
+echo '#include <stdio.h>' > foo.c
+$cat >fieldn <<EOF
+$startsh
+$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
+$grep '^[ ]*#.*stdio\.h' | \
+while read cline; do
+ pos=1
+ set \$cline
+ while $test \$# -gt 0; do
+ if $test -r \`echo \$1 | $tr -d '"'\`; then
+ echo "\$pos"
+ exit 0
fi
- ;;
- esac
- ;;
-*)
- case "$usenm" in
- true) dflt=y;;
- *) dflt=n;;
- esac
- ;;
+ shift
+ pos=\`expr \$pos + 1\`
+ done
+done
+EOF
+chmod +x fieldn
+fieldn=`./fieldn`
+$rm -f foo.c fieldn
+case $fieldn in
+'') pos='???';;
+1) pos=first;;
+2) pos=second;;
+3) pos=third;;
+*) pos="${fieldn}th";;
esac
-$cat <<EOM
-
-I can use 'nm' to extract the symbols from your C libraries. This is a time
-consuming task which may generate huge output on the disk (up to 3 megabytes)
-but that should make the symbols extraction faster. The alternative is to skip
-the 'nm' extraction part and to compile a small test program instead to
-determine whether each symbol is present. If you have a fast C compiler and/or
-if your 'nm' output cannot be parsed, this may be the best solution.
-You shouldn't let me use 'nm' if you have the GNU C Library.
+echo "Your cpp writes the filename in the $pos field of the line."
-EOM
-rp='Shall I use nm to extract C symbols from the libraries?'
-. ./myread
-case "$ans" in
-n|N) usenm=false;;
-*) usenm=true;;
+: locate header file
+$cat >findhdr <<EOF
+$startsh
+wanted=\$1
+name=''
+if test -f $usrinc/\$wanted; then
+ echo "$usrinc/\$wanted"
+ exit 0
+fi
+awkprg='{ print \$$fieldn }'
+echo "#include <\$wanted>" > foo\$\$.c
+$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
+$grep "^[ ]*#.*\$wanted" | \
+while read cline; do
+ name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
+ case "\$name" in
+ */\$wanted) echo "\$name"; exit 0;;
+ *) name='';;
+ esac;
+done;
+$rm -f foo\$\$.c;
+case "\$name" in
+'') exit 1;;
esac
+EOF
+chmod +x findhdr
-runnm=$usenm
-case "$reuseval" in
-true) runnm=false;;
-esac
+: define an alternate in-header-list? function
+inhdr='echo " "; td=$define; tu=$undef; yyy=$@;
+cont=true; xxf="echo \"<\$1> found.\" >&4";
+case $# in 2) xxnf="echo \"<\$1> NOT found.\" >&4";;
+*) xxnf="echo \"<\$1> NOT found, ...\" >&4";;
+esac;
+case $# in 4) instead=instead;; *) instead="at last";; esac;
+while $test "$cont"; do
+ xxx=`./findhdr $1`
+ var=$2; eval "was=\$$2";
+ if $test "$xxx" && $test -r "$xxx";
+ then eval $xxf;
+ eval "case \"\$$var\" in $undef) . ./whoa; esac"; eval "$var=\$td";
+ cont="";
+ else eval $xxnf;
+ eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu"; fi;
+ set $yyy; shift; shift; yyy=$@;
+ case $# in 0) cont="";;
+ 2) xxf="echo \"but I found <\$1> $instead.\" >&4";
+ xxnf="echo \"and I did not find <\$1> either.\" >&4";;
+ *) xxf="echo \"but I found <\$1\> instead.\" >&4";
+ xxnf="echo \"there is no <\$1>, ...\" >&4";;
+ esac;
+done;
+while $test "$yyy";
+do set $yyy; var=$2; eval "was=\$$2";
+ eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu";
+ set $yyy; shift; shift; yyy=$@;
+done'
-: nm options which may be necessary
-case "$nm_opt" in
-'') if $test -f /mach_boot; then
- nm_opt='' # Mach
- elif $test -d /usr/ccs/lib; then
+: see if this is a malloc.h system
+set malloc.h i_malloc
+eval $inhdr
+
+: see if stdlib is available
+set stdlib.h i_stdlib
+eval $inhdr
+
+: determine which malloc to compile in
+echo " "
+case "$usemymalloc" in
+''|[yY]*|true|$define) dflt='y' ;;
+*) dflt='n' ;;
+esac
+rp="Do you wish to attempt to use the malloc that comes with $package?"
+. ./myread
+usemymalloc="$ans"
+case "$ans" in
+y*|true)
+ usemymalloc='y'
+ mallocsrc='malloc.c'
+ mallocobj="malloc$_o"
+ d_mymalloc="$define"
+ case "$libs" in
+ *-lmalloc*)
+ : Remove malloc from list of libraries to use
+ echo "Removing unneeded -lmalloc from library list" >&4
+ set `echo X $libs | $sed -e 's/-lmalloc / /' -e 's/-lmalloc$//'`
+ shift
+ libs="$*"
+ echo "libs = $libs" >&4
+ ;;
+ esac
+ ;;
+*)
+ usemymalloc='n'
+ mallocsrc=''
+ mallocobj=''
+ d_mymalloc="$undef"
+ ;;
+esac
+
+: compute the return types of malloc and free
+echo " "
+$cat >malloc.c <<END
+#$i_malloc I_MALLOC
+#$i_stdlib I_STDLIB
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef I_MALLOC
+#include <malloc.h>
+#endif
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#ifdef TRY_MALLOC
+void *malloc();
+#endif
+#ifdef TRY_FREE
+void free();
+#endif
+END
+case "$malloctype" in
+'')
+ if $cc $ccflags -c -DTRY_MALLOC malloc.c >/dev/null 2>&1; then
+ malloctype='void *'
+ else
+ malloctype='char *'
+ fi
+ ;;
+esac
+echo "Your system wants malloc to return '$malloctype', it would seem." >&4
+
+case "$freetype" in
+'')
+ if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
+ freetype='void'
+ else
+ freetype='int'
+ fi
+ ;;
+esac
+echo "Your system uses $freetype free(), it would seem." >&4
+$rm -f malloc.[co]
+: Cruising for prototypes
+echo " "
+echo "Checking out function prototypes..." >&4
+$cat >prototype.c <<'EOCP'
+main(int argc, char *argv[]) {
+ exit(0);}
+EOCP
+if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
+ echo "Your C compiler appears to support function prototypes."
+ val="$define"
+else
+ echo "Your C compiler doesn't seem to understand function prototypes."
+ val="$undef"
+fi
+set prototype
+eval $setvar
+$rm -f prototype*
+
+case "$prototype" in
+"$define") ;;
+*) ansi2knr='ansi2knr'
+ echo " "
+ cat <<EOM >&4
+
+$me: FATAL ERROR:
+This version of $package can only be compiled by a compiler that
+understands function prototypes. Unfortunately, your C compiler
+ $cc $ccflags
+doesn't seem to understand them. Sorry about that.
+
+If GNU cc is available for your system, perhaps you could try that instead.
+
+Eventually, we hope to support building Perl with pre-ANSI compilers.
+If you would like to help in that effort, please contact <perlbug@perl.org>.
+
+Aborting Configure now.
+EOM
+ exit 2
+ ;;
+esac
+
+: determine where public executables go
+echo " "
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
+. ./getfile
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+bin="$ans"
+binexp="$ansexp"
+if $afs; then
+ $cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+executables reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installbin" in
+ '') dflt=`echo $binexp | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installbin";;
+ esac
+ fn=de~
+ rp='Where will public executables be installed?'
+ . ./getfile
+ installbin="$ans"
+else
+ installbin="$binexp"
+fi
+
+: define a shorthand compile call
+compile='
+mc_file=$1;
+shift;
+$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
+: define a shorthand compile call for compilations that should be ok.
+compile_ok='
+mc_file=$1;
+shift;
+$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
+
+echo " "
+echo "Checking for GNU C Library..." >&4
+cat >gnulibc.c <<EOM
+#include <stdio.h>
+int
+main()
+{
+#ifdef __GLIBC__
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOM
+set gnulibc
+if eval $compile_ok && ./gnulibc; then
+ val="$define"
+ echo "You are using the GNU C Library"
+else
+ val="$undef"
+ echo "You are not using the GNU C Library"
+fi
+$rm -f gnulibc*
+set d_gnulibc
+eval $setvar
+
+: see if nm is to be used to determine whether a symbol is defined or not
+case "$usenm" in
+'')
+ dflt=''
+ case "$d_gnulibc" in
+ "$define")
+ echo " "
+ echo "nm probably won't work on the GNU C Library." >&4
+ dflt=n
+ ;;
+ esac
+ case "$dflt" in
+ '')
+ if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
+ echo " "
+ echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
+ echo "'nm' won't be sufficient on this sytem." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ case "$dflt" in
+ '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
+ if $test $dflt -gt 20; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ ;;
+ esac
+ ;;
+*)
+ case "$usenm" in
+ true|$define) dflt=y;;
+ *) dflt=n;;
+ esac
+ ;;
+esac
+$cat <<EOM
+
+I can use $nm to extract the symbols from your C libraries. This
+is a time consuming task which may generate huge output on the disk (up
+to 3 megabytes) but that should make the symbols extraction faster. The
+alternative is to skip the 'nm' extraction part and to compile a small
+test program instead to determine whether each symbol is present. If
+you have a fast C compiler and/or if your 'nm' output cannot be parsed,
+this may be the best solution.
+
+You probably shouldn't let me use 'nm' if you are using the GNU C Library.
+
+EOM
+rp="Shall I use $nm to extract C symbols from the libraries?"
+. ./myread
+case "$ans" in
+[Nn]*) usenm=false;;
+*) usenm=true;;
+esac
+
+runnm=$usenm
+case "$reuseval" in
+true) runnm=false;;
+esac
+
+: nm options which may be necessary
+case "$nm_opt" in
+'') if $test -f /mach_boot; then
+ nm_opt='' # Mach
+ elif $test -d /usr/ccs/lib; then
nm_opt='-p' # Solaris (and SunOS?)
elif $test -f /dgux; then
nm_opt='-p' # DG-UX
case "$nm_so_opt" in
'') case "$myuname" in
*linux*)
- if nm --help | $grep 'dynamic' > /dev/null 2>&1; then
+ if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
nm_so_opt='--dynamic'
fi
;;
: The messy sed command sorts on library version numbers.
$test -r $1 || \
set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
- tr ' ' '\012' | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
h
s/[0-9][0-9]*/0000&/g
s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
EOM
else
dflt=''
- echo $libpth | tr ' ' '\012' | sort | uniq > libpath
+ echo $libpth | tr ' ' $trnl | sort | uniq > libpath
cat >&4 <<EOM
I can't seem to find your C library. I've looked in the following places:
libc="$ans"
echo " "
-echo $libc $libnames | tr ' ' '\012' | sort | uniq > libnames
+echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
set X `cat libnames`
shift
xxx=files
for file in $*; do
case $file in
- *$so*) nm $nm_so_opt $nm_opt $file 2>/dev/null;;
- *) nm $nm_opt $file 2>/dev/null;;
+ *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
+ *) $nm $nm_opt $file 2>/dev/null;;
esac
done >libc.tmp
$contains '^fprintf$' libc.list >/dev/null 2>&1; then
eval $xrun
else
- nm -p $* 2>/dev/null >libc.tmp
+ $nm -p $* 2>/dev/null >libc.tmp
$grep fprintf libc.tmp > libc.ptf
if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
eval $xrun
else
echo " "
- echo "nm didn't seem to work right. Trying ar instead..." >&4
+ echo "$nm didn't seem to work right. Trying $ar instead..." >&4
com=''
- if ar t $libc > libc.tmp; then
- for thisname in $libnames; do
- ar t $thisname >>libc.tmp
+ if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
+ for thisname in $libnames $libc; do
+ $ar t $thisname >>libc.tmp
done
$sed -e "s/\\$_o\$//" < libc.tmp > libc.list
echo "Ok." >&4
+ elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
+ # Repeat libc to extract forwarders to DLL entries too
+ for thisname in $libnames $libc; do
+ $ar tv $thisname >>libc.tmp
+ # Revision 50 of EMX has bug in $ar.
+ # it will not extract forwarders to DLL entries
+ # Use emximp which will extract exactly them.
+ emximp -o tmp.imp $thisname \
+ 2>/dev/null && \
+ $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
+ < tmp.imp >>libc.tmp
+ $rm tmp.imp
+ done
+ $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
+ echo "Ok." >&4
else
- echo "ar didn't seem to work right." >&4
+ echo "$ar didn't seem to work right." >&4
echo "Maybe this is a Cray...trying bld instead..." >&4
if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
then
for thisname in $libnames; do
bld t $libnames | \
$sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
- ar t $thisname >>libc.tmp
+ $ar t $thisname >>libc.tmp
done
echo "Ok." >&4
else
esac
$rm -f libnames libpath
-: determine filename position in cpp output
-echo " "
-echo "Computing filename position in cpp output for #include directives..." >&4
-echo '#include <stdio.h>' > foo.c
-$cat >fieldn <<EOF
-$startsh
-$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
-$grep '^[ ]*#.*stdio\.h' | \
-while read cline; do
- pos=1
- set \$cline
- while $test \$# -gt 0; do
- if $test -r \`echo \$1 | $tr -d '"'\`; then
- echo "\$pos"
- exit 0
- fi
- shift
- pos=\`expr \$pos + 1\`
- done
-done
-EOF
-chmod +x fieldn
-fieldn=`./fieldn`
-$rm -f foo.c fieldn
-case $fieldn in
-'') pos='???';;
-1) pos=first;;
-2) pos=second;;
-3) pos=third;;
-*) pos="${fieldn}th";;
-esac
-echo "Your cpp writes the filename in the $pos field of the line."
-
-: locate header file
-$cat >findhdr <<EOF
-$startsh
-wanted=\$1
-name=''
-if test -f $usrinc/\$wanted; then
- echo "$usrinc/\$wanted"
- exit 0
-fi
-awkprg='{ print \$$fieldn }'
-echo "#include <\$wanted>" > foo\$\$.c
-$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
-$grep "^[ ]*#.*\$wanted" | \
-while read cline; do
- name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
- case "\$name" in
- */\$wanted) echo "\$name"; exit 0;;
- *) name='';;
- esac;
-done;
-$rm -f foo\$\$.c;
-case "\$name" in
-'') exit 1;;
-esac
-EOF
-chmod +x findhdr
-
-: define an alternate in-header-list? function
-inhdr='echo " "; td=$define; tu=$undef; yyy=$@;
-cont=true; xxf="echo \"<\$1> found.\" >&4";
-case $# in 2) xxnf="echo \"<\$1> NOT found.\" >&4";;
-*) xxnf="echo \"<\$1> NOT found, ...\" >&4";;
-esac;
-case $# in 4) instead=instead;; *) instead="at last";; esac;
-while $test "$cont"; do
- xxx=`./findhdr $1`
- var=$2; eval "was=\$$2";
- if $test "$xxx" && $test -r "$xxx";
- then eval $xxf;
- eval "case \"\$$var\" in $undef) . ./whoa; esac"; eval "$var=\$td";
- cont="";
- else eval $xxnf;
- eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu"; fi;
- set $yyy; shift; shift; yyy=$@;
- case $# in 0) cont="";;
- 2) xxf="echo \"but I found <\$1> $instead.\" >&4";
- xxnf="echo \"and I did not find <\$1> either.\" >&4";;
- *) xxf="echo \"but I found <\$1\> instead.\" >&4";
- xxnf="echo \"there is no <\$1>, ...\" >&4";;
- esac;
-done;
-while $test "$yyy";
-do set $yyy; var=$2; eval "was=\$$2";
- eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu";
- set $yyy; shift; shift; yyy=$@;
-done'
-
: see if dld is available
set dld.h i_dld
eval $inhdr
$define) dflt='y' ;;
esac
: Does a dl_xxx.xs file exist for this operating system
- $test -f ../$dldir/dl_${osname}.xs && dflt='y'
+ $test -f $rsrc/$dldir/dl_${osname}.xs && dflt='y'
;;
esac
rp="Do you wish to use dynamic loading?"
y*) usedl="$define"
case "$dlsrc" in
'')
- if $test -f ../$dldir/dl_${osname}.xs ; then
+ if $test -f $rsrc/$dldir/dl_${osname}.xs ; then
dflt="$dldir/dl_${osname}.xs"
elif $test "$d_dlopen" = "$define" ; then
dflt="$dldir/dl_dlopen.xs"
esac
echo "The following dynamic loading files are available:"
: Can not go over to $dldir because getfile has path hard-coded in.
- cd ..; ls -C $dldir/dl*.xs; cd UU
- rp="Source file to use for dynamic loading"
- fn="fne"
- . ./getfile
+ tdir=`pwd`; cd $rsrc; $ls -C $dldir/dl*.xs; cd $tdir
+ rp="Source file to use for dynamic loading"
+ fn="fne"
+ # XXX This getfile call will fail the existence check if you try
+ # building away from $src (this is not supported yet).
+ . ./getfile
usedl="$define"
: emulate basename
dlsrc=`echo $ans | $sed -e 's@.*/\([^/]*\)$@\1@'`
- $cat << EOM
+ $cat << EOM
Some systems may require passing special flags to $cc -c to
compile modules that will be used to create a shared library.
hpux) dflt='+z' ;;
next) dflt='none' ;;
irix*) dflt='-KPIC' ;;
- svr4*|esix*|solaris)
- case "$ccflags" in
- *-DDEBUGGING*) dflt='-KPIC' ;;
- *) dflt='-Kpic' ;;
- esac
- ;;
+ svr4*|esix*|solaris) dflt='-KPIC' ;;
sunos) dflt='-pic' ;;
*) dflt='none' ;;
esac
;;
*) case "$osname" in
- svr4*|esix*|solaris)
- case "$ccflags" in
- *-DDEBUGGING*) dflt='-fPIC' ;;
- *) dflt='-fpic' ;;
- esac
- ;;
+ svr4*|esix*|solaris) dflt='-fPIC' ;;
*) dflt='-fpic' ;;
esac ;;
esac ;;
+ ' ') dflt='none' ;;
*) dflt="$cccdlflags" ;;
esac
rp="Any special flags to pass to $cc -c to compile shared library modules?"
*) dflt="$lddlflags" ;;
esac
-: Try to guess additional flags to pick up local libraries.
-for thisflag in $ldflags; do
- case "$thisflag" in
- -L*)
- case " $dflt " in
- *" $thisflag "*) ;;
- *) dflt="$dflt $thisflag" ;;
+ : Try to guess additional flags to pick up local libraries.
+ for thisflag in $ldflags; do
+ case "$thisflag" in
+ -L*)
+ case " $dflt " in
+ *" $thisflag "*) ;;
+ *) dflt="$dflt $thisflag" ;;
+ esac
+ ;;
esac
- ;;
- esac
-done
+ done
-case "$dflt" in
-'') dflt='none' ;;
-esac
+ case "$dflt" in
+ ''|' ') dflt='none' ;;
+ esac
rp="Any special flags to pass to $ld to create a dynamically loaded library?"
. ./myread
sunos) dflt='none' ;;
*) dflt='none' ;;
esac ;;
+ ' ') dflt='none' ;;
*) dflt="$ccdlflags" ;;
esac
rp="Any special flags to pass to $cc to use dynamic loading?"
;;
esac
;;
- sunos)
- dflt=n
- also='Building a shared libperl will definitely not work on SunOS 4.'
- ;;
*) dflt=n
;;
esac
# Why does next4 have to be so different?
case "${osname}${osvers}" in
next4*) xxx='DYLD_LIBRARY_PATH' ;;
+ os2*) xxx='' ;; # Nothing special needed.
*) xxx='LD_LIBRARY_PATH' ;;
esac
- $cat <<EOM >&4
+ if test X"$xxx" != "X"; then
+ $cat <<EOM | $tee -a ../config.msg >&4
To build perl, you must add the current working directory to your
-$xxx environtment variable before running make. You can do
+$xxx environment variable before running make. You can do
this with
$xxx=\`pwd\`; export $xxx
for Bourne-style shells, or
for Csh-style shells. You *MUST* do this before running make.
EOM
+ fi
;;
*) useshrplib='false' ;;
esac
*) $cat >&4 <<EOM
WARNING: Use of the shrpdir variable for the installation location of
the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (doughera@lafcol.lafayette.edu)
+will not work in this version. Let me (jhi@iki.fi)
know of any problems this may cause.
EOM
fi
: determine where site specific libraries go.
-set sitelib sitelib
-eval $prefixit
-case "$sitelib" in
-'')
- prog=`echo $package | $sed 's/-*[0-9.]*$//'`
- dflt="$privlib/site_$prog" ;;
-*) dflt="$sitelib" ;;
+: Usual default is /usr/local/lib/perl5/site_perl/$apiversion
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$prefix" in
+*perl*) set dflt sitelib lib/site_$prog/$apiversion ;;
+*) set dflt sitelib lib/$package/site_$prog/$apiversion ;;
esac
+eval $prefixit
$cat <<EOM
The installation process will also create a directory for
fi
: determine where site specific architecture-dependent libraries go.
-xxx=`echo $sitelib/$archname | sed 's!^$prefix!!'`
-: xxx is usuually lib/site_perl/archname.
+: sitelib default is /usr/local/lib/perl5/site_perl/$apiversion
+: sitearch default is /usr/local/lib/perl5/site_perl/$apiversion/$archname
+: sitelib may have an optional trailing /share.
+tdflt=`echo $sitelib | $sed 's,/share$,,'`
+tdflt="$tdflt/$archname"
set sitearch sitearch none
eval $prefixit
case "$sitearch" in
-'') dflt="$sitelib/$archname" ;;
+'') dflt="$tdflt" ;;
*) dflt="$sitearch" ;;
esac
$cat <<EOM
eval $setvar
: Check how to convert floats to strings.
-echo " "
-echo "Checking for an efficient way to convert floats to strings."
-$cat >try.c <<'EOP'
+if test "X$d_Gconvert" = X; then
+ echo " "
+ echo "Checking for an efficient way to convert floats to strings."
+ $cat >try.c <<'EOP'
#ifdef TRY_gconvert
#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
char *myname = "gconvert";
exit(0);
}
EOP
-case "$d_Gconvert" in
-gconvert*) xxx_list='gconvert gcvt sprintf' ;;
-gcvt*) xxx_list='gcvt gconvert sprintf' ;;
-sprintf*) xxx_list='sprintf gconvert gcvt' ;;
-*) xxx_list='gconvert gcvt sprintf' ;;
-esac
+ case "$d_Gconvert" in
+ gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+ gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+ sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+ *) xxx_list='gconvert gcvt sprintf' ;;
+ esac
-for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert"
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert" found. >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
+ for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert"
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert" found. >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
+ else
+ echo "...But $xxx_convert didn't work as I expected."
+ fi
else
- echo "...But $xxx_convert didn't work as I expected."
+ echo "$xxx_convert NOT found." >&4
fi
- else
- echo "$xxx_convert NOT found." >&4
- fi
-done
+ done
-case "$xxx_convert" in
-gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
-gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
-*) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
-esac
+ case "$xxx_convert" in
+ gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+ gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+fi
: Initialize h_fcntl
h_fcntl=false
esac
$rm -f access*
+: see if accessx exists
+set accessx d_accessx
+eval $inlibc
+
: see if alarm exists
set alarm d_alarm
eval $inlibc
}
EOCP
set intsize
- if eval $compile && ./intsize > /dev/null; then
+ if eval $compile_ok && ./intsize > /dev/null; then
eval `./intsize`
echo "Your integers are $intsize bytes long."
echo "Your long integers are $longsize bytes long."
: check for ability to cast large floats to 32-bit ints.
echo " "
echo 'Checking whether your C compiler can cast large floats to int32.' >&4
-if $test "$intsize" -eq 4; then
+if $test "$intsize" -ge 4; then
xxx=int
else
xxx=long
fi
$cat >try.c <<EOCP
+#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
-$signal_t blech() { exit(3); }
+$signal_t blech(s) int s; { exit(3); }
main()
{
$xxx i32;
- double f;
+ double f, g;
int result = 0;
+ char str[16];
signal(SIGFPE, blech);
- f = (double) 0x7fffffff;
- f = 10 * f;
- i32 = ($xxx) f;
-
+ /* Don't let compiler optimize the test away. Store the number
+ in a writable string for gcc to pass to sscanf under HP/UX.
+ */
+ sprintf(str, "2147483647");
+ sscanf(str, "%lf", &f); /* f = (double) 0x7fffffff; */
+ g = 10 * f;
+ i32 = ($xxx) g;
+
+ /* x86 processors will probably give 0x8000 0000, which is a
+ sign change. We don't want that. We want to mimic SPARC
+ behavior here, which is to preserve the sign and give
+ back 0x7fff ffff.
+ */
if (i32 != ($xxx) f)
result |= 1;
exit(result);
}
EOCP
set try
-if eval $compile; then
+if eval $compile_ok; then
./try
yyy=$?
else
echo " "
echo 'Checking whether your C compiler can cast negative float to unsigned.' >&4
$cat >try.c <<EOCP
+#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
-$signal_t blech() { exit(7); }
-$signal_t blech_in_list() { exit(4); }
+$signal_t blech(s) int s; { exit(7); }
+$signal_t blech_in_list(s) int s; { exit(4); }
unsigned long dummy_long(p) unsigned long p; { return p; }
unsigned int dummy_int(p) unsigned int p; { return p; }
unsigned short dummy_short(p) unsigned short p; { return p; }
main()
{
- double f = -123.;
+ double f;
unsigned long along;
unsigned int aint;
unsigned short ashort;
int result = 0;
+ char str[16];
+
+ /* Frustrate gcc-2.7.2's optimizer which failed this test with
+ a direct f = -123. assignment. gcc-2.8.0 reportedly
+ optimized the whole file away
+ */
+ /* Store the number in a writable string for gcc to pass to
+ sscanf under HP/UX.
+ */
+ sprintf(str, "-123");
+ sscanf(str, "%lf", &f); /* f = -123.; */
signal(SIGFPE, blech);
along = (unsigned long)f;
result |= 1;
if (ashort != (unsigned short)-123)
result |= 1;
- f = (double)0x40000000;
+ sprintf(str, "1073741824.");
+ sscanf(str, "%lf", &f); /* f = (double)0x40000000; */
f = f + f;
along = 0;
along = (unsigned long)f;
if (result)
exit(result);
signal(SIGFPE, blech_in_list);
- f = 123.;
+ sprintf(str, "123.");
+ sscanf(str, "%lf", &f); /* f = 123.; */
along = dummy_long((unsigned long)f);
aint = dummy_int((unsigned int)f);
ashort = dummy_short((unsigned short)f);
}
EOCP
set try
-if eval $compile; then
+if eval $compile_ok; then
./try
castflags=$?
else
set d_crypt
eval $setvar
-: get csh whereabouts
-case "$csh" in
-'csh') val="$undef" ;;
-*) val="$define" ;;
-esac
-set d_csh
-eval $setvar
-: Respect a hint or command line value for full_csh.
-case "$full_csh" in
-'') full_csh=$csh ;;
-esac
-
: see if cuserid exists
set cuserid d_cuserid
eval $inlibc
set d_dbl_dig
eval $setvar
+
+if $test X"$use64bits" = X"$define"; then
+ : see if dbminit64 exists
+ set dbminit64 d_dbminit64
+ eval $inlibc
+
+ : see if dbmclose64 exists
+ set dbmclose64 d_dbmclose64
+ eval $inlibc
+
+ : see if fetch64 exists
+ set fetch64 d_fetch64
+ eval $inlibc
+
+ : see if store64 exists
+ set store64 d_store64
+ eval $inlibc
+
+ : see if delete64 exists
+ set delete64 d_delete64
+ eval $inlibc
+
+ : see if firstkey64 exists
+ set firstkey64 d_firstkey64
+ eval $inlibc
+
+ : see if nextkey64 exists
+ set nextkey64 d_nextkey64
+ eval $inlibc
+else
+ val="$undef"
+ for xxx in d_dbminit64 d_dbmclose64 d_fetch64 d_store64 d_delete64 d_firstkey64 d_nextkey64
+ do
+ set $xxx
+ eval $setvar
+ done
+fi
+
: see if difftime exists
set difftime d_difftime
eval $inlibc
+: see if sys/stat.h is available
+set sys/stat.h i_sysstat
+eval $inhdr
+
: see if this is a dirent system
echo " "
if xinc=`./findhdr dirent.h`; $test "$xinc"; then
eval $setvar
$rm -f try.c
+hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+echo "int main () { struct $struct foo; foo.$field = 0; }" >> try.c;
+if eval $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define";
+else
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c try.o'
+
+
+if $test X"$use64bits" = X"$define"; then
+ : see if fstat64 exists
+ set fstat64 d_fstat64
+ eval $inlibc
+
+ : see if ftruncate64 exists
+ set ftruncate64 d_ftruncate64
+ eval $inlibc
+
+ : see if lockf64 exists
+ set lockf64 d_lockf64
+ eval $inlibc
+
+ : see if lseek64 exists
+ set lseek64 d_lseek64
+ eval $inlibc
+
+ : see if lstat64 exists
+ set lstat64 d_lstat64
+ eval $inlibc
+
+ : see if open64 exists
+ set open64 d_open64
+ eval $inlibc
+
+ : see if opendir64 exists
+ set opendir64 d_opendir64
+ eval $inlibc
+
+ : see if readdir64 exists
+ set readdir64 d_readdir64
+ eval $inlibc
+
+ : see if seekdir64 exists
+ set seekdir64 d_seekdir64
+ eval $inlibc
+
+ : see if stat64 exists
+ set stat64 d_stat64
+ eval $inlibc
+
+ : see if telldir64 exists
+ set telldir64 d_telldir64
+ eval $inlibc
+
+ : see if truncate64 exists
+ set truncate64 d_truncate64
+ eval $inlibc
+
+ : check for off64_t
+ echo " "
+ echo $n "Checking to see if your system supports off64_t...$c" >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+off64_t foo() { off64_t x; x = 7; return x; }'
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+ else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+ fi
+ $rm -f try.*
+ set d_off64t
+ eval $setvar
+
+ : check for ino64_t
+ echo " "
+ echo $n "Checking to see if your system supports ino64_t...$c" >&4
+ val="$undef"
+ case "$i_sysstat" in
+ "$define" )
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <sys/stat.h>
+ino64_t foo() { ino64_t x; x = 7; return x; }'
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ fi
+ $rm -f try.*
+ ;;
+ esac
+ if $test "X$val" = X"$define"; then
+ echo " Yup, it does." >&4
+ else
+ echo " Nope, it doesn't." >&4
+ fi
+ set d_ino64t
+ eval $setvar
+
+ : check for struct flock64
+ echo " "
+ echo "Checking to see if your system supports struct flock64..." >&4
+ if $h_fcntl; then
+ set d_flock64s flock64 l_len define fcntl.h
+ eval $hasfield
+ else
+ val="$undef"
+ set d_flock64s
+ eval $setvar
+ fi
+ case "$d_flock64s" in
+ "$define") echo "Yup, it does." >&4
+ ;;
+ *) echo "Nope, it doesn't." >&4
+ ;;
+ esac
+
+ : check for struct dirent64
+ echo " "
+ echo "Checking to see if your system supports struct dirent64..." >&4
+ set d_dirent64s dirent64 d_off $i_dirent dirent.h
+ eval $hasfield
+ case "$d_flock64s" in
+ "$define") echo "Yup, it does." >&4
+ ;;
+ *) echo "Nope, it doesn't." >&4
+ ;;
+ esac
+
+else
+ val="$undef"
+ for xxx in d_fstat64 d_ftruncate64 d_lockf64 d_lseek64 d_lstat64 d_open64 d_opendir64 d_readdir64 d_seekdir64 d_stat64 d_telldir64 d_truncate64 d_off64t d_ino64t d_flock64s d_dirent64s
+ do
+ set $xxx
+ eval $setvar
+ done
+fi
+
: see if dlerror exists
xxx_runnm="$runnm"
runnm=false
$cat << EOM
On a few systems, the dynamically loaded modules that perl generates and uses
-will need a different extension then shared libs. The default will probably
+will need a different extension than shared libs. The default will probably
be appropriate.
EOM
if $cc $ccflags $cccdlflags -c dyna.c > /dev/null 2>&1 &&
mv dyna${_o} tmp-dyna${_o} > /dev/null 2>&1 &&
$ld $lddlflags -o dyna.$dlext tmp-dyna${_o} > /dev/null 2>&1 &&
- $cc $ccflags $ldflags $cccdlflags $ccdlflags fred.c -o fred $libs > /dev/null 2>&1; then
+ $cc $ccflags -o fred $ldflags $cccdlflags $ccdlflags fred.c $libs > /dev/null 2>&1; then
xxx=`./fred`
case $xxx in
1) echo "Test program failed using dlopen." >&4
set d_dlsymun
eval $setvar
+hasproto='varname=$1; func=$2; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+$cppstdin $cppflags $cppminus < try.c > tryout.c 2>/dev/null;
+if $contains "$func.*(" tryout.c >/dev/null 2>&1; then
+ echo "$func() prototype found.";
+ val="$define";
+else
+ echo "$func() prototype NOT found.";
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c tryout.c'
+
+: see if prototype for drand48 is available
+echo " "
+set d_drand48proto drand48 $i_stdlib stdlib.h $i_unistd unistd.h
+eval $hasproto
+
: see if dup2 exists
set dup2 d_dup2
eval $inlibc
+: see if eaccess exists
+set eaccess d_eaccess
+eval $inlibc
+
+: see if endgrent exists
+set endgrent d_endgrent
+eval $inlibc
+
+: see if endhostent exists
+set endhostent d_endhent
+eval $inlibc
+
+: see if endnetent exists
+set endnetent d_endnent
+eval $inlibc
+
+: see if endprotoent exists
+set endprotoent d_endpent
+eval $inlibc
+
+: see if endpwent exists
+set endpwent d_endpwent
+eval $inlibc
+
+: see if endservent exists
+set endservent d_endsent
+eval $inlibc
+
: Locate the flags for 'open()'
echo " "
$cat >open3.c <<'EOCP'
}
EOCP
set try
- if eval $compile; then
+ if eval $compile_ok; then
o_nonblock=`./try`
case "$o_nonblock" in
'') echo "I can't figure it out, assuming O_NONBLOCK will do.";;
#include <sys/types.h>
#include <signal.h>
#define MY_O_NONBLOCK $o_nonblock
+#ifndef errno /* XXX need better Configure test */
extern int errno;
+#endif
$signal_t blech(x) int x; { exit(3); }
EOCP
$cat >> try.c <<'EOCP'
}
EOCP
set try
- if eval $compile; then
+ if eval $compile_ok; then
echo "$startsh" >mtry
echo "./try >try.out 2>try.ret 3>try.err || exit 4" >>mtry
chmod +x mtry
set fgetpos d_fgetpos
eval $inlibc
+
+if $test X"$use64bits" = X"$define"; then
+ : see if fgetpos64 exists
+ set fgetpos64 d_fgetpos64
+ eval $inlibc
+
+ : see if fopen64 exists
+ set freopen64 d_fopen64
+ eval $inlibc
+
+ : see if freopen64 exists
+ set freopen64 d_freopen64
+ eval $inlibc
+
+ : see if fseek64 exists
+ set fseek64 d_fseek64
+ eval $inlibc
+
+ : see if fseeko64 exists
+ set fseeko64 d_fseeko64
+ eval $inlibc
+
+ : see if fsetpos64 exists
+ set fsetpos64 d_fsetpos64
+ eval $inlibc
+
+ : see if ftell64 exists
+ set ftell64 d_ftell64
+ eval $inlibc
+
+ : see if ftello64 exists
+ set ftello64 d_ftello64
+ eval $inlibc
+
+ : see if tmpfile64 exists
+ set tmpfile64 d_tmpfile64
+ eval $inlibc
+else
+ val="$undef"
+ for xxx in d_fgetpos64 d_fopen64 d_freopen64 d_fseek64 d_fseeko64 d_fsetpos64 d_ftell64 d_ftello64 d_tmpfile64
+ do
+ set $xxx
+ eval $setvar
+ done
+fi
+
: see if flock exists
set flock d_flock
eval $inlibc
set fpathconf d_fpathconf
eval $inlibc
+: see if fseeko exists
+set fseeko d_fseeko
+eval $inlibc
+
: see if fsetpos exists
set fsetpos d_fsetpos
eval $inlibc
+: see if ftello exists
+set ftello d_ftello
+eval $inlibc
+
+: see if getgrent exists
+set getgrent d_getgrent
+eval $inlibc
+
+: see if gethostbyaddr exists
+set gethostbyaddr d_gethbyaddr
+eval $inlibc
+
+: see if gethostbyname exists
+set gethostbyname d_gethbyname
+eval $inlibc
+
: see if gethostent exists
set gethostent d_gethent
eval $inlibc
+: see if this is a netdb.h system
+set netdb.h i_netdb
+eval $inhdr
+
+: see if prototypes for various gethostxxx netdb.h functions are available
+echo " "
+set d_gethostprotos gethostent $i_netdb netdb.h
+eval $hasproto
+
: see if getlogin exists
set getlogin d_getlogin
eval $inlibc
+: see if getnetbyaddr exists
+set getnetbyaddr d_getnbyaddr
+eval $inlibc
+
+: see if getnetbyname exists
+set getnetbyname d_getnbyname
+eval $inlibc
+
+: see if getnetent exists
+set getnetent d_getnent
+eval $inlibc
+
+: see if prototypes for various getnetxxx netdb.h functions are available
+echo " "
+set d_getnetprotos getnetent $i_netdb netdb.h
+eval $hasproto
+
+
+: see if getprotobyname exists
+set getprotobyname d_getpbyname
+eval $inlibc
+
+: see if getprotobynumber exists
+set getprotobynumber d_getpbynumber
+eval $inlibc
+
+: see if getprotoent exists
+set getprotoent d_getpent
+eval $inlibc
+
: see if getpgid exists
set getpgid d_getpgid
eval $inlibc
set getpriority d_getprior
eval $inlibc
+: see if prototypes for various getprotoxxx netdb.h functions are available
+echo " "
+set d_getprotoprotos getprotoent $i_netdb netdb.h
+eval $hasproto
+
+: see if getpwent exists
+set getpwent d_getpwent
+eval $inlibc
+
+
+: see if getservbyname exists
+set getservbyname d_getsbyname
+eval $inlibc
+
+: see if getservbyport exists
+set getservbyport d_getsbyport
+eval $inlibc
+
+: see if getservent exists
+set getservent d_getsent
+eval $inlibc
+
+: see if prototypes for various getservxxx netdb.h functions are available
+echo " "
+set d_getservprotos getservent $i_netdb netdb.h
+eval $hasproto
+
: see if gettimeofday or ftime exists
set gettimeofday d_gettimeod
eval $inlibc
;;
esac
+: see if this is an grp system
+set grp.h i_grp
+eval $inhdr
+
+case "$i_grp" in
+$define)
+ xxx=`./findhdr grp.h`
+ $cppstdin $cppflags $cppminus < $xxx >$$.h
+
+ if $contains 'gr_passwd' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_grpasswd
+ eval $setvar
+
+ $rm -f $$.h
+ ;;
+*)
+ val="$undef";
+ set d_grpasswd; eval $setvar
+ ;;
+esac
+
: see if this is a netinet/in.h or sys/in.h system
set netinet/in.h i_niin sys/in.h i_sysin
eval $inhdr
+: see if arpa/inet.h has to be included
+set arpa/inet.h i_arpainet
+eval $inhdr
+
: see if htonl --and friends-- exists
val=''
set htonl val
#include <sys/types.h>
#$i_niin I_NETINET_IN
#$i_sysin I_SYS_IN
+#$i_arpainet I_ARPA_INET
#ifdef I_NETINET_IN
#include <netinet/in.h>
#endif
#ifdef I_SYS_IN
#include <sys/in.h>
#endif
+#ifdef I_ARPA_INET
+#include <arpa/inet.h>
+#endif
#ifdef htonl
printf("Defined as a macro.");
#endif
set inet_aton d_inetaton
eval $inlibc
+: see if inttypes.h is available
+set inttypes.h i_inttypes
+eval $inhdr
+: check for int64_t
+case "$use64bits" in
+"$define" )
+ echo " "
+ echo $n "Checking to see if your system supports int64_t...$c" >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+int64_t foo() { int64_t x; x = 7; return x; }
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+ else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+ fi
+ $rm -f try.*
+ ;;
+*) val="$undef"
+ ;;
+esac
+set d_int64t
+eval $setvar
+
+
: Look for isascii
echo " "
$cat >isascii.c <<'EOCP'
set killpg d_killpg
eval $inlibc
+: see if lchown exists
+echo " "
+$cat > try.c <<'EOCP'
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char lchown(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char lchown();
+int main() {
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_lchown) || defined (__stub___lchown)
+choke me
+#else
+lchown();
+#endif
+; return 0; }
+EOCP
+set try
+if eval $compile; then
+ $echo "lchown() found." >&4
+ val="$define"
+else
+ $echo "lchown() NOT found." >&4
+ val="$undef"
+fi
+set d_lchown
+eval $setvar
+
: see if link exists
set link d_link
eval $inlibc
set lockf d_lockf
eval $inlibc
+: check for length of double
+echo " "
+case "$doublesize" in
+'')
+ $echo $n "Checking to see how big your double precision numbers are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+main()
+{
+ printf("%d\n", sizeof(double));
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`./try`
+ $echo " $doublesize bytes." >&4
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+: check for long doubles
+echo " "
+echo $n "Checking to see if your system supports long doubles...$c" >&4
+echo 'long double foo() { long double x; x = 7.0; return x; }' > try.c
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+fi
+$rm try.*
+set d_longdbl
+eval $setvar
+
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ $echo $n "Checking to see how big your long doubles are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ if eval $compile; then
+ longdblsize=`./try`
+ $echo " $longdblsize bytes." >&4
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
+ fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+: check for long long
+echo " "
+echo $n "Checking to see if your system supports long long...$c" >&4
+echo 'long long foo() { long long x; x = 7; return x; }' > try.c
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+fi
+$rm try.*
+set d_longlong
+eval $setvar
+
+: check for length of long long
+case "${d_longlong}${longlongsize}" in
+$define)
+ echo " "
+ $echo $n "Checking to see how big your long longs are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+main()
+{
+ printf("%d\n", sizeof(long long));
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ longlongsize=`./try`
+ $echo " $longlongsize bytes." >&4
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a long long (in bytes)?"
+ . ./myread
+ longlongsize="$ans"
+ fi
+ if $test "X$longsize" = "X$longlongsize"; then
+ echo "(That isn't any different from an ordinary long.)"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
: see if lstat exists
set lstat d_lstat
eval $inlibc
set msgsnd d_msgsnd
eval $inlibc
-: see if msgrcv exists
-set msgrcv d_msgrcv
-eval $inlibc
-
-: see how much of the 'msg*(2)' library is present.
-h_msg=true
-echo " "
-case "$d_msgctl$d_msgget$d_msgsnd$d_msgrcv" in
-*"$undef"*) h_msg=false;;
-esac
-: we could also check for sys/ipc.h ...
-if $h_msg && $test `./findhdr sys/msg.h`; then
- echo "You have the full msg*(2) library." >&4
- val="$define"
-else
- echo "You don't have the full msg*(2) library." >&4
- val="$undef"
-fi
-set d_msg
-eval $setvar
-
-: see if this is a malloc.h system
-set malloc.h i_malloc
-eval $inhdr
-
-: see if stdlib is available
-set stdlib.h i_stdlib
-eval $inhdr
-
-: determine which malloc to compile in
-echo " "
-case "$usemymalloc" in
-''|y*|true) dflt='y' ;;
-n*|false) dflt='n' ;;
-*) dflt="$usemymalloc" ;;
-esac
-rp="Do you wish to attempt to use the malloc that comes with $package?"
-. ./myread
-usemymalloc="$ans"
-case "$ans" in
-y*|true)
- usemymalloc='y'
- mallocsrc='malloc.c'
- mallocobj="malloc$_o"
- d_mymalloc="$define"
- case "$libs" in
- *-lmalloc*)
- : Remove malloc from list of libraries to use
- echo "Removing unneeded -lmalloc from library list" >&4
- set `echo X $libs | $sed -e 's/-lmalloc / /' -e 's/-lmalloc$//'`
- shift
- libs="$*"
- echo "libs = $libs" >&4
- ;;
- esac
- ;;
-*)
- usemymalloc='n'
- mallocsrc=''
- mallocobj=''
- d_mymalloc="$undef"
- ;;
-esac
-
-: compute the return types of malloc and free
+: see if msgrcv exists
+set msgrcv d_msgrcv
+eval $inlibc
+
+: see how much of the 'msg*(2)' library is present.
+h_msg=true
echo " "
-$cat >malloc.c <<END
-#$i_malloc I_MALLOC
-#$i_stdlib I_STDLIB
-#include <stdio.h>
-#include <sys/types.h>
-#ifdef I_MALLOC
-#include <malloc.h>
-#endif
-#ifdef I_STDLIB
-#include <stdlib.h>
-#endif
-#ifdef TRY_MALLOC
-void *malloc();
-#endif
-#ifdef TRY_FREE
-void free();
-#endif
-END
-case "$malloctype" in
-'')
- if $cc $ccflags -c -DTRY_MALLOC malloc.c >/dev/null 2>&1; then
- malloctype='void *'
- else
- malloctype='char *'
- fi
- ;;
+case "$d_msgctl$d_msgget$d_msgsnd$d_msgrcv" in
+*"$undef"*) h_msg=false;;
esac
-echo "Your system wants malloc to return '$malloctype', it would seem." >&4
-
-case "$freetype" in
-'')
- if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
- freetype='void'
- else
- freetype='int'
- fi
+case "$osname" in
+freebsd)
+ case "`ipcs 2>&1`" in
+ "SVID messages"*"not configured"*)
+ echo "Your $osname does not have the msg*(2) configured." >&4
+ h_msg=false
+ val="$undef"
+ set msgctl d_msgctl
+ eval $setvar
+ set msgget d_msgget
+ eval $setvar
+ set msgsnd d_msgsnd
+ eval $setvar
+ set msgrcv d_msgrcv
+ eval $setvar
;;
+ esac
+ ;;
esac
-echo "Your system uses $freetype free(), it would seem." >&4
-$rm -f malloc.[co]
+: we could also check for sys/ipc.h ...
+if $h_msg && $test `./findhdr sys/msg.h`; then
+ echo "You have the full msg*(2) library." >&4
+ val="$define"
+else
+ echo "You don't have the full msg*(2) library." >&4
+ val="$undef"
+fi
+set d_msg
+eval $setvar
+
: see if nice exists
set nice d_nice
eval $inlibc
eval $inlibc
-: see whether the various POSIXish _yields exist within given cccmd
+: see whether the various POSIXish _yields exist
$cat >try.c <<EOP
#include <pthread.h>
+#include <stdio.h>
main() {
- YIELD();
- exit(0);
+#ifdef SCHED_YIELD
+ sched_yield();
+#else
+#ifdef PTHREAD_YIELD
+ pthread_yield();
+#else
+#ifdef PTHREAD_YIELD_NULL
+ pthread_yield(NULL);
+#endif
+#endif
+#endif
}
EOP
-: see if pthread_yield exists within given cccmd,
-: if we do not usethreads this may well end up undef.
-set try -DYIELD=pthread_yield
+: see if sched_yield exists
+set try -DSCHED_YIELD
if eval $compile; then
val="$define"
- echo 'pthread_yield() found.' >&4
+ sched_yield='sched_yield()'
else
val="$undef"
- echo 'pthread_yield() NOT found.' >&4
fi
-set d_pthread_yield
+case "$usethreads" in
+$define)
+ case "$val" in
+ $define) echo 'sched_yield() found.' >&4 ;;
+ *) echo 'sched_yield() NOT found.' >&4 ;;
+ esac
+esac
+set d_sched_yield
eval $setvar
-: see if sched_yield exists within given cccmd,
-: if we do not usethreads this may well end up undef.
-set try -DYIELD=sched_yield
+: see if pthread_yield exists
+set try -DPTHREAD_YIELD
if eval $compile; then
val="$define"
- echo 'sched_yield() found.' >&4
+ case "$sched_yield" in
+ '') sched_yield='pthread_yield()' ;;
+ esac
else
- val="$undef"
- echo 'sched_yield() NOT found.' >&4
+ set try -DPTHREAD_YIELD_NULL
+ if eval $compile; then
+ val="$define"
+ case "$sched_yield" in
+ '') sched_yield='pthread_yield(NULL)' ;;
+ esac
+ else
+ val="$undef"
+ fi
fi
-set d_sched_yield
+case "$usethreads" in
+$define)
+ case "$val" in
+ $define) echo 'pthread_yield() found.' >&4 ;;
+ *) echo 'pthread_yield() NOT found.' >&4 ;;
+ esac
+ ;;
+esac
+set d_pthread_yield
eval $setvar
+
+case "$sched_yield" in
+'') sched_yield=undef ;;
+esac
+
$rm -f try try.*
: test whether pthreads are created in joinable -- aka undetached -- state
-if test "X$usethreads" != X; then
- echo >&4 "Checking whether pthreads are created joinable."
+if test "X$usethreads" = "X$define"; then
+ echo $n "Checking whether pthreads are created joinable. $c" >&4
$cat >try.c <<'EOCP'
#include <pthread.h>
#include <stdio.h>
int detachstate;
printf("%s\n",
pthread_attr_init(&attr) == 0 &&
+#if PTHREAD_ATTR_GETDETACHSTATE_INT
+ pthread_attr_getdetachstate(&attr) == 0 &&
+#else
pthread_attr_getdetachstate(&attr, &detachstate) == 0 &&
+#endif
detachstate == PTHREAD_CREATE_DETACHED ?
"detached" : "joinable");
exit(0);
if eval $compile; then
yyy=`./try`
case "$yyy" in
- detached) echo "Nope, they aren't." ;;
- *) echo "Yup, they are." ;;
+ detached) echo "Nope, they aren't." >&4 ;;
+ *) echo "Yup, they are." >&4 ;;
esac
else
- echo "(I can't execute the test program--assuming they are.)"
- yyy=joinable
+ set try -DPTHREAD_ATTR_GETDETACHSTATE_INT
+ if eval $compile; then
+ yyy=`./try`
+ case "$yyy" in
+ detached) echo "Nope, they aren't." >&4 ;;
+ *) echo "Yup, they are." >&4 ;;
+ esac
+ else
+ echo " "
+ echo "(I can't execute the test program--assuming they are.)" >&4
+ yyy=joinable
+ fi
fi
$rm -f try try.*
case "$yyy" in
set d_pwcomment
eval $setvar
+ if $contains 'pw_gecos' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwgecos
+ eval $setvar
+
+ if $contains 'pw_passwd' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwpasswd
+ eval $setvar
+
$rm -f $$.h
;;
*)
set d_pwclass; eval $setvar
set d_pwexpire; eval $setvar
set d_pwcomment; eval $setvar
+ set d_pwgecos; eval $setvar
+ set d_pwpasswd; eval $setvar
;;
esac
}
EOCP
set try
- if eval $compile; then
+ if eval $compile_ok; then
if ./try 2>/dev/null; then
echo "Yes, it can."
val="$define"
}
EOCP
set try
- if eval $compile; then
+ if eval $compile_ok; then
if ./try 2>/dev/null; then
echo "Yes, it can."
val="$define"
}
EOCP
set try
- if eval $compile; then
+ if eval $compile_ok; then
if ./try 2>/dev/null; then
echo "Yes, it can."
val="$define"
case "$d_semctl$d_semget$d_semop" in
*"$undef"*) h_sem=false;;
esac
+case "$osname" in
+freebsd)
+ case "`ipcs 2>&1`" in
+ "SVID messages"*"not configured"*)
+ echo "Your $osname does not have the sem*(2) configured." >&4
+ h_sem=false
+ val="$undef"
+ set semctl d_semctl
+ eval $setvar
+ set semget d_semget
+ eval $setvar
+ set semop d_semop
+ eval $setvar
+ ;;
+ esac
+ ;;
+esac
: we could also check for sys/ipc.h ...
if $h_sem && $test `./findhdr sys/sem.h`; then
echo "You have the full sem*(2) library." >&4
set d_sem
eval $setvar
+: see whether sys/sem.h defines union semun
+echo " "
+$cat > try.c <<'END'
+#include <sys/types.h>
+#include <sys/ipc.h>
+#include <sys/sem.h>
+int main () { union semun semun; semun.buf = 0; }
+END
+set try
+if eval $compile; then
+ echo "You have union semun in <sys/sem.h>." >&4
+ val="$define"
+else
+ echo "You do not have union semun in <sys/sem.h>." >&4
+ val="$undef"
+fi
+$rm -f try try.c try.h
+set d_union_semun
+eval $setvar
+
+: see how to do semctl IPC_STAT
+case "$d_sem" in
+$define)
+ : see whether semctl IPC_STAT can use union semun
+ echo " "
+ $cat > try.h <<END
+#ifndef S_IRUSR
+# ifdef S_IREAD
+# define S_IRUSR S_IREAD
+# define S_IWUSR S_IWRITE
+# define S_IXUSR S_IEXEC
+# else
+# define S_IRUSR 0400
+# define S_IWUSR 0200
+# define S_IXUSR 0100
+# endif
+# define S_IRGRP (S_IRUSR>>3)
+# define S_IWGRP (S_IWUSR>>3)
+# define S_IXGRP (S_IXUSR>>3)
+# define S_IROTH (S_IRUSR>>6)
+# define S_IWOTH (S_IWUSR>>6)
+# define S_IXOTH (S_IXUSR>>6)
+#endif
+#ifndef S_IRWXU
+# define S_IRWXU (S_IRUSR|S_IWUSR|S_IXUSR)
+# define S_IRWXG (S_IRGRP|S_IWGRP|S_IXGRP)
+# define S_IRWXO (S_IROTH|S_IWOTH|S_IXOTH)
+#endif
+END
+
+ $cat > try.c <<END
+#include <sys/types.h>
+#include <sys/ipc.h>
+#include <sys/sem.h>
+#include <sys/stat.h>
+#include <stdio.h>
+#include <errno.h>
+#include "try.h"
+#ifndef errno
+extern int errno;
+#endif
+#$d_union_semun HAS_UNION_SEMUN
+int main() {
+ union semun
+#ifndef HAS_UNION_SEMUN
+ {
+ int val;
+ struct semid_ds *buf;
+ unsigned short *array;
+ }
+#endif
+ arg;
+ int sem, st;
+
+#if defined(IPC_PRIVATE) && defined(S_IRWXU) && defined(S_IRWXG) && defined(S_IRWXO) && defined(IPC_CREAT)
+ sem = semget(IPC_PRIVATE, 1, S_IRWXU|S_IRWXG|S_IRWXO|IPC_CREAT);
+ if (sem > -1) {
+ struct semid_ds argbuf;
+ arg.buf = &argbuf;
+# ifdef IPC_STAT
+ st = semctl(sem, 0, IPC_STAT, arg);
+ if (st == 0)
+ printf("semun\n");
+ else
+# endif /* IPC_STAT */
+ printf("semctl IPC_STAT failed: errno = %d\n", errno);
+# ifdef IPC_RMID
+ if (semctl(sem, 0, IPC_RMID, arg) != 0)
+# endif /* IPC_RMID */
+ printf("semctl IPC_RMID failed: errno = %d\n", errno);
+ } else
+#endif /* IPC_PRIVATE && ... */
+ printf("semget failed: errno = %d\n", errno);
+ return 0;
+}
+END
+ val="$undef"
+ set try
+ if eval $compile; then
+ xxx=`./try`
+ case "$xxx" in
+ semun) val="$define" ;;
+ esac
+ fi
+ $rm -f try try.c
+ set d_semctl_semun
+ eval $setvar
+ case "$d_semctl_semun" in
+ $define)
+ echo "You can use union semun for semctl IPC_STAT." >&4
+ also='also'
+ ;;
+ *) echo "You cannot use union semun for semctl IPC_STAT." >&4
+ also=''
+ ;;
+ esac
+
+ : see whether semctl IPC_STAT can use struct semid_ds pointer
+ $cat > try.c <<'END'
+#include <sys/types.h>
+#include <sys/ipc.h>
+#include <sys/sem.h>
+#include <sys/stat.h>
+#include "try.h"
+#include <stdio.h>
+#include <errno.h>
+#ifndef errno
+extern int errno;
+#endif
+int main() {
+ struct semid_ds arg;
+ int sem, st;
+
+#if defined(IPC_PRIVATE) && defined(S_IRWXU) && defined(S_IRWXG) && defined(S_IRWXO) && defined(IPC_CREAT)
+ sem = semget(IPC_PRIVATE, 1, S_IRWXU|S_IRWXG|S_IRWXO|IPC_CREAT);
+ if (sem > -1) {
+# ifdef IPC_STAT
+ st = semctl(sem, 0, IPC_STAT, &arg);
+ if (st == 0)
+ printf("semid_ds\n");
+ else
+# endif /* IPC_STAT */
+ printf("semctl IPC_STAT failed: errno = %d\n", errno);
+# ifdef IPC_RMID
+ if (semctl(sem, 0, IPC_RMID, &arg) != 0)
+# endif /* IPC_RMID */
+ printf("semctl IPC_RMID failed: errno = %d\n", errno);
+ } else
+#endif /* IPC_PRIVATE && ... */
+ printf("semget failed: errno = %d\n", errno);
+
+ return 0;
+}
+END
+ val="$undef"
+ set try
+ if eval $compile; then
+ xxx=`./try`
+ case "$xxx" in
+ semid_ds) val="$define" ;;
+ esac
+ fi
+ $rm -f try try.c
+ set d_semctl_semid_ds
+ eval $setvar
+ case "$d_semctl_semid_ds" in
+ $define)
+ echo "You can $also use struct semid_ds * for semctl IPC_STAT." >&4
+ ;;
+ *) echo "You cannot use struct semid_ds * for semctl IPC_STAT." >&4
+ ;;
+ esac
+ $rm -f try.h
+ ;;
+*) val="$undef"
+
+ # We do not have the full sem*(2) library, so assume we can not
+ # use either.
+
+ set d_semctl_semun
+ eval $setvar
+
+ set d_semctl_semid_ds
+ eval $setvar
+ ;;
+esac
+
: see if setegid exists
set setegid d_setegid
eval $inlibc
set seteuid d_seteuid
eval $inlibc
+: see if setgrent exists
+set setgrent d_setgrent
+eval $inlibc
+
+: see if sethostent exists
+set sethostent d_sethent
+eval $inlibc
+
: see if setlinebuf exists
set setlinebuf d_setlinebuf
eval $inlibc
set setlocale d_setlocale
eval $inlibc
+: see if setnetent exists
+set setnetent d_setnent
+eval $inlibc
+
+: see if setprotoent exists
+set setprotoent d_setpent
+eval $inlibc
+
: see if setpgid exists
set setpgid d_setpgid
eval $inlibc
set setpriority d_setprior
eval $inlibc
+: see if setpwent exists
+set setpwent d_setpwent
+eval $inlibc
+
: see if setregid exists
set setregid d_setregid
eval $inlibc
set setruid d_setruid
eval $inlibc
+: see if setservent exists
+set setservent d_setsent
+eval $inlibc
+
: see if setsid exists
set setsid d_setsid
eval $inlibc
+: see if setvbuf exists
+set setvbuf d_setvbuf
+eval $inlibc
+
: see if sfio.h is available
set sfio.h i_sfio
eval $inhdr
case "$d_shmctl$d_shmget$d_shmat$d_shmdt" in
*"$undef"*) h_shm=false;;
esac
+case "$osname" in
+freebsd)
+ case "`ipcs 2>&1`" in
+ "SVID shared memory"*"not configured"*)
+ echo "Your $osname does not have the shm*(2) configured." >&4
+ h_shm=false
+ val="$undef"
+ set shmctl d_shmctl
+ evat $setvar
+ set shmget d_shmget
+ evat $setvar
+ set shmat d_shmat
+ evat $setvar
+ set shmdt d_shmdt
+ evat $setvar
+ ;;
+ esac
+ ;;
+esac
: we could also check for sys/ipc.h ...
if $h_shm && $test `./findhdr sys/shm.h`; then
echo "You have the full shm*(2) library." >&4
: see if we have sigaction
if set sigaction val -f d_sigaction; eval $csym; $val; then
echo 'sigaction() found.' >&4
- val="$define"
-else
- echo 'sigaction NOT found.' >&4
- val="$undef"
-fi
-$cat > try.c <<'EOP'
+ $cat > try.c <<'EOP'
#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
struct sigaction act, oact;
}
EOP
-set try
-if eval $compile; then
- :
+ set try
+ if eval $compile_ok; then
+ val="$define"
+ else
+ echo "But you don't seem to have a useable struct sigaction." >&4
+ val="$undef"
+ fi
else
- echo "But you don't seem to have a useable struct sigaction." >&4
+ echo 'sigaction NOT found.' >&4
val="$undef"
fi
set d_sigaction; eval $setvar
else
echo "You don't have Berkeley networking in libc$_a..." >&4
if test -f /usr/lib/libnet$_a; then
- ( (nm $nm_opt /usr/lib/libnet$_a | eval $nm_extract) || \
- ar t /usr/lib/libnet$_a) 2>/dev/null >> libc.list
+ ( ($nm $nm_opt /usr/lib/libnet$_a | eval $nm_extract) || \
+ $ar t /usr/lib/libnet$_a) 2>/dev/null >> libc.list
if $contains socket libc.list >/dev/null 2>&1; then
echo "...but the Wollongong group seems to have hacked it in." >&4
socketlib="-lnet"
: see if stat knows about block sizes
echo " "
-xxx=`./findhdr sys/stat.h`
-if $contains 'st_blocks;' "$xxx" >/dev/null 2>&1 ; then
- if $contains 'st_blksize;' "$xxx" >/dev/null 2>&1 ; then
- echo "Your stat() knows about block sizes." >&4
- val="$define"
- else
- echo "Your stat() doesn't know about block sizes." >&4
- val="$undef"
- fi
-else
- echo "Your stat() doesn't know about block sizes." >&4
- val="$undef"
-fi
-set d_statblks
-eval $setvar
+set d_statblks stat st_blocks $i_sysstat sys/stat.h
+eval $hasfield
: see if _ptr and _cnt from stdio act std
echo " "
: see if strerror and/or sys_errlist[] exist
echo " "
-if set strerror val -f d_strerror; eval $csym; $val; then
- echo 'strerror() found.' >&4
- d_strerror="$define"
- d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
- echo "(You also have sys_errlist[], so we could roll our own strerror.)"
- d_syserrlst="$define"
- else
- echo "(Since you don't have sys_errlist[], sterror() is welcome.)"
- d_syserrlst="$undef"
- fi
-elif xxx=`./findhdr string.h`; test "$xxx" || xxx=`./findhdr strings.h`; \
- $contains '#[ ]*define.*strerror' "$xxx" >/dev/null 2>&1; then
- echo 'strerror() found in string header.' >&4
- d_strerror="$define"
- d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
- echo "(Most probably, strerror() uses sys_errlist[] for descriptions.)"
+if test "X$d_strerror" = X -o "X$d_syserrlst" = X; then
+ if set strerror val -f d_strerror; eval $csym; $val; then
+ echo 'strerror() found.' >&4
+ d_strerror="$define"
+ d_strerrm='strerror(e)'
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "(You also have sys_errlist[], so we could roll our own strerror.)"
+ d_syserrlst="$define"
+ else
+ echo "(Since you don't have sys_errlist[], sterror() is welcome.)"
+ d_syserrlst="$undef"
+ fi
+ elif xxx=`./findhdr string.h`; test "$xxx" || xxx=`./findhdr strings.h`; \
+ $contains '#[ ]*define.*strerror' "$xxx" >/dev/null 2>&1; then
+ echo 'strerror() found in string header.' >&4
+ d_strerror="$define"
+ d_strerrm='strerror(e)'
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "(Most probably, strerror() uses sys_errlist[] for descriptions.)"
+ d_syserrlst="$define"
+ else
+ echo "(You don't appear to have any sys_errlist[], how can this be?)"
+ d_syserrlst="$undef"
+ fi
+ elif set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "strerror() not found, but you have sys_errlist[] so we'll use that." >&4
+ d_strerror="$undef"
d_syserrlst="$define"
- else
- echo "(You don't appear to have any sys_errlist[], how can this be?)"
+ d_strerrm='((e)<0||(e)>=sys_nerr?"unknown":sys_errlist[e])'
+ else
+ echo 'strerror() and sys_errlist[] NOT found.' >&4
+ d_strerror="$undef"
d_syserrlst="$undef"
- fi
-elif set sys_errlist val -a d_syserrlst; eval $csym; $val; then
-echo "strerror() not found, but you have sys_errlist[] so we'll use that." >&4
- d_strerror="$undef"
- d_syserrlst="$define"
- d_strerrm='((e)<0||(e)>=sys_nerr?"unknown":sys_errlist[e])'
-else
- echo 'strerror() and sys_errlist[] NOT found.' >&4
- d_strerror="$undef"
- d_syserrlst="$undef"
- d_strerrm='"unknown"'
+ d_strerrm='"unknown"'
+ fi
fi
: see if strtod exists
for inc in $inclist; do
echo "#include <$inc>" >>temp.c;
done;
+ echo "#ifdef $type" >> temp.c;
+ echo "printf(\"We have $type\");" >> temp.c;
+ echo "#endif" >> temp.c;
$cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
if $contains $type temp.E >/dev/null 2>&1; then
eval "$var=\$type";
*) eval "$var=\$varval";;
esac'
+: define an is-a-typedef? function that prompts if the type is not available.
+typedef_ask='type=$1; var=$2; def=$3; shift; shift; shift; inclist=$@;
+case "$inclist" in
+"") inclist="sys/types.h";;
+esac;
+eval "varval=\$$var";
+case "$varval" in
+"")
+ $rm -f temp.c;
+ for inc in $inclist; do
+ echo "#include <$inc>" >>temp.c;
+ done;
+ echo "#ifdef $type" >> temp.c;
+ echo "printf(\"We have $type\");" >> temp.c;
+ echo "#endif" >> temp.c;
+ $cppstdin $cppflags $cppminus < temp.c >temp.E 2>/dev/null;
+ echo " " ;
+ echo "$rp" | $sed -e "s/What is/Looking for/" -e "s/?/./";
+ if $contains $type temp.E >/dev/null 2>&1; then
+ echo "$type found." >&4;
+ eval "$var=\$type";
+ else
+ echo "$type NOT found." >&4;
+ dflt="$def";
+ . ./myread ;
+ eval "$var=\$ans";
+ fi;
+ $rm -f temp.?;;
+*) eval "$var=\$varval";;
+esac'
+
: see if this is a sys/times.h system
set sys/times.h i_systimes
eval $inhdr
case "$i_systimes" in
"$define") inc='sys/times.h';;
esac
+ rp="What is the type returned by times() on this system?"
set clock_t clocktype long stdio.h sys/types.h $inc
- eval $typedef
- dflt="$clocktype"
- echo " "
- rp="What type is returned by times() on this system?"
- . ./myread
- clocktype="$ans"
+ eval $typedef_ask
else
echo 'times() NOT found, hope that will do.' >&4
d_times="$undef"
set sys/ndir.h i_sysndir
eval $inhdr
+: see if sys/types.h has to be included
+set sys/types.h i_systypes
+eval $inhdr
+
: see if closedir exists
set closedir d_closedir
eval $inlibc
#$i_dirent I_DIRENT /**/
#$i_sysdir I_SYS_DIR /**/
#$i_sysndir I_SYS_NDIR /**/
+#$i_systypes I_SYS_TYPES /**/
+#if defined(I_SYS_TYPES)
+#include <sys/types.h>
+#endif
#if defined(I_DIRENT)
#include <dirent.h>
#if defined(NeXT) && defined(I_SYS_DIR) /* NeXT needs dirent + sys/dir.h */
int main() { return closedir(opendir(".")); }
EOM
set closedir
- if eval $compile; then
+ if eval $compile_ok; then
if ./closedir > /dev/null 2>&1 ; then
echo "Yes, it does."
val="$undef"
}
EOCP
set try
- if eval $compile; then
+ if eval $compile_ok; then
dflt=`./try`
else
dflt='8'
eval $inhdr
case "$i_db" in
-define)
- : Check the return type needed for hash
- echo " "
- echo "Checking return type needed for hash for Berkeley DB ..." >&4
- $cat >try.c <<EOCP
-#$d_const HASCONST
-#ifndef HASCONST
-#define const
-#endif
-#include <sys/types.h>
-#include <db.h>
-
-#ifndef DB_VERSION_MAJOR
-u_int32_t hash_cb (ptr, size)
-const void *ptr;
-size_t size;
-{
-}
-HASHINFO info;
-main()
-{
- info.hash = hash_cb;
-}
-#endif
-EOCP
- if $cc $ccflags -c try.c >try.out 2>&1 ; then
- if $contains warning try.out >>/dev/null 2>&1 ; then
- db_hashtype='int'
- else
- db_hashtype='u_int32_t'
- fi
- else
- : XXX Maybe we should just give up here.
- db_hashtype=u_int32_t
- echo "Help: I can't seem to compile the db test program." >&4
- echo "Something's wrong, but I'll assume you use $db_hashtype." >&4
- fi
- $rm -f try.*
- echo "Your version of Berkeley DB uses $db_hashtype for hash."
- ;;
-*) db_hashtype=u_int32_t
- ;;
-esac
-
-case "$i_db" in
$define)
: Check db version.
echo " "
printf("db.h and libdb are compatible\n") ;
Version = DB_VERSION_MAJOR * 1000000 + DB_VERSION_MINOR * 1000
- + DB_VERSION_PATCH ;
+ + DB_VERSION_PATCH ;
/* needs to be >= 2.3.4 */
if (Version < 2003004) {
- /* if (DB_VERSION_MAJOR == 2 && DB_VERSION_MINOR == 0 && DB_VERSION_PATCH
-< 5) { */
+ /* if (DB_VERSION_MAJOR == 2 && DB_VERSION_MINOR == 0 && DB_VERSION_PATCH < 5) { */
printf("but Perl needs Berkeley DB 2.3.4 or greater\n") ;
exit(2);
}
case "$i_db" in
define)
+ : Check the return type needed for hash
+ echo " "
+ echo "Checking return type needed for hash for Berkeley DB ..." >&4
+ $cat >try.c <<EOCP
+#$d_const HASCONST
+#ifndef HASCONST
+#define const
+#endif
+#include <sys/types.h>
+#include <db.h>
+
+#ifndef DB_VERSION_MAJOR
+u_int32_t hash_cb (ptr, size)
+const void *ptr;
+size_t size;
+{
+}
+HASHINFO info;
+main()
+{
+ info.hash = hash_cb;
+}
+#endif
+EOCP
+ if $cc $ccflags -c try.c >try.out 2>&1 ; then
+ if $contains warning try.out >>/dev/null 2>&1 ; then
+ db_hashtype='int'
+ else
+ db_hashtype='u_int32_t'
+ fi
+ else
+ : XXX Maybe we should just give up here.
+ db_hashtype=u_int32_t
+ $cat try.out >&4
+ echo "Help: I can't seem to compile the db test program." >&4
+ echo "Something's wrong, but I'll assume you use $db_hashtype." >&4
+ fi
+ $rm -f try.*
+ echo "Your version of Berkeley DB uses $db_hashtype for hash."
+ ;;
+*) db_hashtype=u_int32_t
+ ;;
+esac
+case "$i_db" in
+define)
: Check the return type needed for prefix
echo " "
echo "Checking return type needed for prefix for Berkeley DB ..." >&4
else
db_prefixtype='size_t'
: XXX Maybe we should just give up here.
+ $cat try.out >&4
echo "Help: I can't seem to compile the db test program." >&4
echo "Something's wrong, but I'll assume you use $db_prefixtype." >&4
fi
: check for void type
echo " "
echo "Checking to see how well your C compiler groks the void type..." >&4
-echo " "
-$cat >&4 <<EOM
- Support flag bits are:
- 1: basic void declarations.
- 2: arrays of pointers to functions returning void.
- 4: operations between pointers to and addresses of void functions.
- 8: generic void pointers.
-EOM
-echo " "
case "$voidflags" in
'')
$cat >try.c <<'EOCP'
EOCP
if $cc $ccflags -c -DTRY=$defvoidused try.c >.out 2>&1 ; then
voidflags=$defvoidused
- echo "It appears to support void to the level $package wants ($defvoidused)."
+ echo "Good. It appears to support void to the level $package wants.">&4
if $contains warning .out >/dev/null 2>&1; then
echo "However, you might get some warnings that look like this:"
$cat .out
esac
case "$voidflags" in
"$defvoidused") ;;
-*)
+*) $cat >&4 <<'EOM'
+ Support flag bits are:
+ 1: basic void declarations.
+ 2: arrays of pointers to functions returning void.
+ 4: operations between pointers to and addresses of void functions.
+ 8: generic void pointers.
+EOM
dflt="$voidflags";
rp="Your void support flags add up to what?"
. ./myread
esac
$rm -f try.* .out
-: see what type file positions are declared as in the library
-set fpos_t fpostype long stdio.h sys/types.h
-eval $typedef
+
+: How can we generate normalized random numbers ?
+echo " "
+case "$randfunc" in
+'')
+ if set drand48 val -f; eval $csym; $val; then
+ dflt="drand48"
+ echo "Good, found drand48()." >&4
+ elif set random val -f; eval $csym; $val; then
+ dflt="random"
+ echo "OK, found random()." >&4
+ else
+ dflt="rand"
+ echo "Yick, looks like I have to use rand()." >&4
+ fi
+ echo " "
+ ;;
+*)
+ dflt="$randfunc"
+ ;;
+esac
+cont=true
+
+case "$ccflags" in
+*-Dmy_rand=*|*-Dmy_srand=*)
+ echo "Removing obsolete -Dmy_rand, -Dmy_srand, and -Drandbits from ccflags." >&4
+ ccflags="`echo $ccflags | sed -e 's/-Dmy_rand=random/ /'`"
+ ccflags="`echo $ccflags | sed -e 's/-Dmy_srand=srandom/ /'`"
+ ccflags="`echo $ccflags | sed -e 's/-Drandbits=[0-9][0-9]*/ /'`"
+ ;;
+esac
+
+while $test "$cont"; do
+ rp="Use which function to generate random numbers?"
+ . ./myread
+ if $test "$ans" = "$dflt"; then
+ : null
+ else
+ randbits=''
+ fi
+ randfunc="$ans"
+ if set $ans val -f; eval $csym; $val; then
+ cont=''
+ else
+ dflt=n
+ rp="Function $ans does not exists. Use that name anyway?"
+ . ./myread
+ dflt=rand
+ case "$ans" in
+ [yY]*) cont='';;
+ esac
+ fi
+ case "$cont" in
+ '')
+ case "$randfunc" in
+ drand48)
+ drand01="drand48()"
+ seedfunc="srand48"
+ randbits=48
+ randseedtype=long
+ ;;
+ rand|random)
+ case "$randbits" in
+ '')
+echo "Checking to see how many bits your $randfunc() function produces..." >&4
+ $cat >try.c <<EOCP
+#$i_unistd I_UNISTD
+#$i_stdlib I_STDLIB
+#include <stdio.h>
+#ifdef I_UNISTD
+# include <unistd.h>
+#endif
+#ifdef I_STDLIB
+# include <stdlib.h>
+#endif
+main()
+{
+ register int i;
+ register unsigned long tmp;
+ register unsigned long max = 0L;
+
+ for (i = 1000; i; i--) {
+ tmp = (unsigned long) $randfunc();
+ if (tmp > max) max = tmp;
+ }
+ for (i = 0; max; i++)
+ max /= 2;
+ printf("%d\n",i);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ dflt=`try`
+ else
+ dflt='?'
+ echo "(I can't seem to compile the test program...)"
+ fi
+ ;;
+ *)
+ dflt="$randbits"
+ ;;
+ esac
+ rp="How many bits does your $randfunc() function produce?"
+ . ./myread
+ randbits="$ans"
+ $rm -f try.c try
+ drand01="($randfunc() / (double) ((unsigned long)1 << $randbits))"
+ seedfunc="s$randfunc"
+ randseedtype=unsigned
+ ;;
+ *)
+ dflt="31"
+ rp="How many bits does your $randfunc() function produce?"
+ . ./myread
+ randbits="$ans"
+ seedfunc="s$randfunc"
+ drand01="($randfunc() / (double) ((unsigned long)1 << $randbits))"
+ if set $seedfunc val -f; eval $csym; $val; then
+ echo "(Using $seedfunc() to seed random generator)"
+ else
+ echo "(Warning: no $seedfunc() to seed random generator)"
+ seedfunc=rand
+ fi
+ randseedtype=unsigned
+ ;;
+ esac
+ ;;
+ esac
+done
+
echo " "
-dflt="$fpostype"
+echo "Determining whether or not we are on an EBCDIC system..." >&4
+$cat >tebcdic.c <<'EOM'
+int main()
+{
+ if ('M'==0xd4) return 0;
+ return 1;
+}
+EOM
+
+val=$undef
+set tebcdic
+if eval $compile_ok; then
+ if ./tebcdic; then
+ echo "You have EBCDIC." >&4
+ val="$define"
+ else
+ echo "Nope, no EBCDIC. Assuming ASCII or some ISO Latin." >&4
+ fi
+else
+ echo "$me: I'm unable to compile the test program." >&4
+ echo "I'll assume ASCII or some ISO Latin." >&4
+fi
+$rm -f tebcdic.c tebcdic
+set ebcdic
+eval $setvar
+
+: see what type file positions are declared as in the library
rp="What is the type for file position used by fsetpos()?"
-. ./myread
-fpostype="$ans"
+set fpos_t fpostype long stdio.h sys/types.h
+eval $typedef_ask
+
+: get csh whereabouts
+case "$csh" in
+'csh') val="$undef" ;;
+*) val="$define" ;;
+esac
+set d_csh
+eval $setvar
+: Respect a hint or command line value for full_csh.
+case "$full_csh" in
+'') full_csh=$csh ;;
+esac
: Store the full pathname to the sed program for use in the C program
full_sed=$sed
: see what type gids are declared as in the kernel
+echo " "
+echo "Looking for the type for group ids returned by getgid()."
set gid_t gidtype xxx stdio.h sys/types.h
eval $typedef
case "$gidtype" in
;;
*) dflt="$gidtype";;
esac
-echo " "
-rp="What is the type for group ids returned by getgid()?"
-. ./myread
-gidtype="$ans"
+case "$gidtype" in
+gid_t) echo "gid_t found." ;;
+*) rp="What is the type for group ids returned by getgid()?"
+ . ./myread
+ gidtype="$ans"
+ ;;
+esac
: see if getgroups exists
set getgroups d_getgrps
*) dflt="$groupstype" ;;
esac
$cat <<EOM
-What is the type of the second argument to getgroups() and setgroups()?
+What type of pointer is the second argument to getgroups() and setgroups()?
Usually this is the same as group ids, $gidtype, but not always.
EOM
- rp='What type is the second argument to getgroups() and setgroups()?'
+ rp='What type pointer is the second argument to getgroups() and setgroups()?'
. ./myread
groupstype="$ans"
;;
esac
: see what type lseek is declared as in the kernel
+rp="What is the type used for lseek's offset on this system?"
set off_t lseektype long stdio.h sys/types.h
-eval $typedef
+eval $typedef_ask
+
echo " "
-dflt="$lseektype"
-rp="What type is lseek's offset on this system declared as?"
-. ./myread
-lseektype="$ans"
+$echo $n "Checking to see how big your file offsets are...$c" >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+main()
+{
+ printf("%d\n", sizeof($lseektype));
+}
+EOCP
+set try
+if eval $compile_ok; then
+ lseeksize=`./try`
+ $echo " $lseeksize bytes." >&4
+else
+ dflt='4'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of your file offsets (in bytes)?"
+ . ./myread
+ lseeksize="$ans"
+fi
+$rm -f try.c try
echo " "
echo "Checking if your $make program sets \$(MAKE)..." >&4
$rm -f testmake.mak
;;
esac
-case "$make_set_make" in
-'#') echo "Yup, it does.";;
-*) echo "Nope, it doesn't.";;
-esac
-
-: see what type is used for mode_t
-set mode_t modetype int stdio.h sys/types.h
-eval $typedef
-dflt="$modetype"
-echo " "
-rp="What type is used for file modes?"
-. ./myread
-modetype="$ans"
-
-: Cruising for prototypes
-echo " "
-echo "Checking out function prototypes..." >&4
-$cat >prototype.c <<'EOCP'
-main(int argc, char *argv[]) {
- exit(0);}
-EOCP
-if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
- echo "Your C compiler appears to support function prototypes."
- val="$define"
-else
- echo "Your C compiler doesn't seem to understand function prototypes."
- val="$undef"
-fi
-set prototype
-eval $setvar
-$rm -f prototype*
+case "$make_set_make" in
+'#') echo "Yup, it does.";;
+*) echo "Nope, it doesn't.";;
+esac
+
+: see what type is used for mode_t
+rp="What is the type used for file modes for system calls (e.g. fchmod())?"
+set mode_t modetype int stdio.h sys/types.h
+eval $typedef_ask
: define a fucntion to check prototypes
$cat > protochk <<EOSH
chmod +x protochk
$eunicefix protochk
-: see if gethostbyaddr exists
-set gethostbyaddr d_gethbyaddr
-eval $inlibc
-
-: see if gethostbyname exists
-set gethostbyname d_gethbyname
-eval $inlibc
-
-: see if getnetbyaddr exists
-set getnetbyaddr d_getnbyaddr
-eval $inlibc
-
-: see if this is a netdb.h system
-set netdb.h i_netdb
-eval $inhdr
-
: see what type is used for size_t
+rp="What is the type used for the length parameter for string functions?"
set size_t sizetype 'unsigned int' stdio.h sys/types.h
-eval $typedef
-dflt="$sizetype"
-echo " "
-rp="What type is used for the length parameter for string functions?"
-. ./myread
-sizetype="$ans"
+eval $typedef_ask
: check for type of arguments to gethostbyaddr.
if test "X$netdb_host_type" = X -o "X$netdb_hlen_type" = X; then
esac
;;
*) : no getnetbyaddr, so pick harmless default
- netdb_name_type='long'
+ netdb_net_type='long'
;;
esac
fi
pager="$ans"
: see what type pids are declared as in the kernel
+rp="What is the type of process ids on this system?"
set pid_t pidtype int stdio.h sys/types.h
-eval $typedef
-dflt="$pidtype"
-echo " "
-rp="What type are process ids on this system declared as?"
-. ./myread
-pidtype="$ans"
+eval $typedef_ask
-: check for size of random number generator
+: check for length of pointer
echo " "
-case "$randbits" in
+case "$ptrsize" in
'')
- echo "Checking to see how many bits your rand function produces..." >&4
- $cat >try.c <<EOCP
-#$i_unistd I_UNISTD
-#$i_stdlib I_STDLIB
-#include <stdio.h>
-#ifdef I_UNISTD
-# include <unistd.h>
-#endif
-#ifdef I_STDLIB
-# include <stdlib.h>
-#endif
-EOCP
+ $echo $n "Checking to see how big your pointers are...$c" >&4
+ if test "$voidflags" -gt 7; then
+ echo '#define VOID_PTR char *' > try.c
+ else
+ echo '#define VOID_PTR void *' > try.c
+ fi
$cat >>try.c <<'EOCP'
+#include <stdio.h>
main()
{
- register int i;
- register unsigned long tmp;
- register unsigned long max = 0L;
-
- for (i = 1000; i; i--) {
- tmp = (unsigned long)rand();
- if (tmp > max) max = tmp;
- }
- for (i = 0; max; i++)
- max /= 2;
- printf("%d\n",i);
+ printf("%d\n", sizeof(VOID_PTR));
+ exit(0);
}
EOCP
set try
- if eval $compile; then
- dflt=`./try$_exe`
+ if eval $compile_ok; then
+ ptrsize=`./try`
+ $echo " $ptrsize bytes." >&4
else
- dflt='?'
- echo "(I can't seem to compile the test program...)"
+ dflt='4'
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a pointer (in bytes)?"
+ . ./myread
+ ptrsize="$ans"
fi
;;
-*)
- dflt="$randbits"
- ;;
esac
-rp='How many bits does your rand() function produce?'
-. ./myread
-randbits="$ans"
-$rm -f try.* try
+$rm -f try.c try
: see if ar generates random libraries by itself
echo " "
$ar rc bar$_a bar2$_o bar1$_o >/dev/null 2>&1
if $cc $ccflags $ldflags -o foobar foo$_o bar$_a $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
- echo "ar appears to generate random libraries itself."
+ echo "$ar appears to generate random libraries itself."
orderlib=false
ranlib=":"
elif $ar ts bar$_a >/dev/null 2>&1 &&
$cc $ccflags $ldflags -o foobar foo$_o bar$_a $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
- echo "a table of contents needs to be added with 'ar ts'."
+ echo "a table of contents needs to be added with '$ar ts'."
orderlib=false
ranlib="$ar ts"
else
: see if we should include time.h, sys/time.h, or both
echo " "
-echo "Testing to see if we should include <time.h>, <sys/time.h> or both." >&4
-$echo $n "I'm now running the test program...$c"
-$cat >try.c <<'EOCP'
+if test "X$timeincl" = X; then
+ echo "Testing to see if we should include <time.h>, <sys/time.h> or both." >&4
+ $echo $n "I'm now running the test program...$c"
+ $cat >try.c <<'EOCP'
#include <sys/types.h>
#ifdef I_TIME
#include <time.h>
exit(1);
}
EOCP
-flags=''
-for s_timezone in '-DS_TIMEZONE' ''; do
-sysselect=''
-for s_timeval in '-DS_TIMEVAL' ''; do
-for i_systimek in '' '-DSYSTIMEKERNEL'; do
-for i_time in '' '-DI_TIME'; do
-for i_systime in '-DI_SYSTIME' ''; do
- case "$flags" in
- '') $echo $n ".$c"
- set try $i_time $i_systime $i_systimek $sysselect $s_timeval $s_timezone
- if eval $compile; then
+ flags=''
+ for s_timezone in '-DS_TIMEZONE' ''; do
+ sysselect=''
+ for s_timeval in '-DS_TIMEVAL' ''; do
+ for i_systimek in '' '-DSYSTIMEKERNEL'; do
+ for i_time in '' '-DI_TIME'; do
+ for i_systime in '-DI_SYSTIME' ''; do
+ case "$flags" in
+ '') $echo $n ".$c"
+ set try $i_time $i_systime $i_systimek $sysselect $s_timeval $s_timezone
+ if eval $compile; then
set X $i_time $i_systime $i_systimek $sysselect $s_timeval
- shift
- flags="$*"
- echo " "
- $echo $n "Succeeded with $flags$c"
- fi
- ;;
+ shift
+ flags="$*"
+ echo " "
+ $echo $n "Succeeded with $flags$c"
+ fi
+ ;;
+ esac
+ done
+ done
+ done
+ done
+ done
+ timeincl=''
+ echo " "
+ case "$flags" in
+ *SYSTIMEKERNEL*) i_systimek="$define"
+ timeincl=`./findhdr sys/time.h`
+ echo "We'll include <sys/time.h> with KERNEL defined." >&4;;
+ *) i_systimek="$undef";;
esac
-done
-done
-done
-done
-done
-timeincl=''
-echo " "
-case "$flags" in
-*SYSTIMEKERNEL*) i_systimek="$define"
- timeincl=`./findhdr sys/time.h`
- echo "We'll include <sys/time.h> with KERNEL defined." >&4;;
-*) i_systimek="$undef";;
-esac
-case "$flags" in
-*I_TIME*) i_time="$define"
- timeincl=`./findhdr time.h`" $timeincl"
- echo "We'll include <time.h>." >&4;;
-*) i_time="$undef";;
-esac
-case "$flags" in
-*I_SYSTIME*) i_systime="$define"
- timeincl=`./findhdr sys/time.h`" $timeincl"
- echo "We'll include <sys/time.h>." >&4;;
-*) i_systime="$undef";;
-esac
-$rm -f try.c try
+ case "$flags" in
+ *I_TIME*) i_time="$define"
+ timeincl=`./findhdr time.h`" $timeincl"
+ echo "We'll include <time.h>." >&4;;
+ *) i_time="$undef";;
+ esac
+ case "$flags" in
+ *I_SYSTIME*) i_systime="$define"
+ timeincl=`./findhdr sys/time.h`" $timeincl"
+ echo "We'll include <sys/time.h>." >&4;;
+ *) i_systime="$undef";;
+ esac
+ $rm -f try.c try
+fi
: check for fd_set items
$cat <<EOM
: The first arg can be int, unsigned, or size_t
: The last arg may or may not be 'const'
val=''
- for xxx in 'fd_set *' 'int *'; do
- for nfd in 'int' 'size_t' 'unsigned' ; do
+ for xxx in 'fd_set *' 'int *' 'void *'; do
+ for nfd in 'int' 'size_t' 'unsigned long' 'unsigned' ; do
for tmo in 'struct timeval *' 'const struct timeval *'; do
case "$val" in
'') try="extern select _(($nfd, $xxx, $xxx, $xxx, $tmo));"
;;
esac
+: check for the select 'width'
+case "$selectminbits" in
+'') case "$d_select" in
+ $define)
+ $cat <<EOM
+
+Checking to see on how many bits at a time your select() operates...
+EOM
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#$i_time I_TIME
+#$i_systime I_SYS_TIME
+#$i_systimek I_SYS_TIME_KERNEL
+#ifdef I_TIME
+# include <time.h>
+#endif
+#ifdef I_SYS_TIME
+# ifdef I_SYS_TIME_KERNEL
+# define KERNEL
+# endif
+# include <sys/time.h>
+# ifdef I_SYS_TIME_KERNEL
+# undef KERNEL
+# endif
+#endif
+#$i_sysselct I_SYS_SELECT
+#ifdef I_SYS_SELECT
+#include <sys/select.h>
+#endif
+#include <stdio.h>
+$selecttype b;
+#define S sizeof(*(b))
+#define MINBITS 64
+#define NBYTES (S * 8 > MINBITS ? S : MINBITS/8)
+#define NBITS (NBYTES * 8)
+int main() {
+ char s[NBYTES];
+ struct timeval t;
+ int i;
+ FILE* fp;
+ int fd;
+
+ fclose(stdin);
+ fp = fopen("try.c", "r");
+ if (fp == 0)
+ exit(1);
+ fd = fileno(fp);
+ if (fd < 0)
+ exit(2);
+ b = ($selecttype)s;
+ for (i = 0; i < NBITS; i++)
+ FD_SET(i, b);
+ t.tv_sec = 0;
+ t.tv_usec = 0;
+ select(fd + 1, b, 0, 0, &t);
+ for (i = NBITS - 1; i > fd && FD_ISSET(i, b); i--);
+ printf("%d\n", i + 1);
+ return 0;
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ selectminbits=`./try`
+ case "$selectminbits" in
+ '') cat >&4 <<EOM
+Cannot figure out on how many bits at a time your select() operates.
+I'll play safe and guess it is 32 bits.
+EOM
+ selectminbits=32
+ bits="32 bits"
+ ;;
+ 1) bits="1 bit" ;;
+ *) bits="$selectminbits bits" ;;
+ esac
+ echo "Your select() operates on $bits at a time." >&4
+ else
+ rp='What is the minimum number of bits your select() operates on?'
+ case "$byteorder" in
+ 1234|12345678) dflt=32 ;;
+ *) dflt=1 ;;
+ esac
+ . ./myread
+ val=$ans
+ selectminbits="$val"
+ fi
+ $rm -f try.* try
+ ;;
+ *) : no select, so pick a harmless default
+ selectminbits='32'
+ ;;
+ esac
+ ;;
+esac
+
: Trace out the files included by signal.h, then look for SIGxxx names.
: Remove SIGARRAYSIZE used by HPUX.
: Remove SIGTYP void lines used by OS2.
xxx="$xxx TSTP TTIN TTOU URG USR1 USR2 USR3 USR4 VTALRM"
xxx="$xxx WINCH WIND WINDOW XCPU XFSZ"
: generate a few handy files for later
-$cat > signal.c <<'EOP'
+$cat > signal.c <<'EOCP'
#include <sys/types.h>
#include <signal.h>
+#include <stdio.h>
int main() {
/* Strange style to avoid deeply-nested #if/#else/#endif */
printf("NSIG %d\n", NSIG);
-EOP
-echo $xxx | $tr ' ' '\012' | $sort | $uniq | $awk '
+#ifndef JUST_NSIG
+
+EOCP
+
+echo $xxx | $tr ' ' $trnl | $sort | $uniq | $awk '
{
printf "#ifdef SIG"; printf $1; printf "\n"
printf "printf(\""; printf $1; printf " %%d\\n\",SIG";
printf "#endif\n"
}
END {
+ printf "#endif /* JUST_NSIG */\n";
printf "}\n";
}
' >>signal.c
EOP
$cat >signal_cmd <<EOS
$startsh
-$test -s signal.lst && exit 0
-if $cc $optimize $ccflags $ldflags -o signal signal.c $libs >/dev/null 2>&1; then
+if $test -s signal.lst; then
+ echo "Using your existing signal.lst file"
+ exit 0
+fi
+xxx="$xxx"
+EOS
+$cat >>signal_cmd <<'EOS'
+
+set signal
+if eval $compile_ok; then
./signal$_exe | $sort -n +1 | $uniq | $awk -f signal.awk >signal.lst
else
- echo "(I can't seem be able to compile the test program -- Guessing)"
+ echo "(I can't seem be able to compile the whole test program)" >&4
+ echo "(I'll try it in little pieces.)" >&4
+ set signal -DJUST_NSIG
+ if eval $compile_ok; then
+ ./signal$_exe > signal.nsg
+ $cat signal.nsg
+ else
+ echo "I can't seem to figure out how many signals you have." >&4
+ echo "Guessing 50." >&4
+ echo 'NSIG 50' > signal.nsg
+ fi
+ : Now look at all the signal names, one at a time.
+ for xx in `echo $xxx | $tr ' ' $trnl | $sort | $uniq`; do
+ $cat > signal.c <<EOCP
+#include <sys/types.h>
+#include <signal.h>
+#include <stdio.h>
+int main() {
+printf("$xx %d\n", SIG${xx});
+return 0;
+}
+EOCP
+ set signal
+ if eval $compile; then
+ echo "SIG${xx} found."
+ ./signal$_exe >> signal.ls1
+ else
+ echo "SIG${xx} NOT found."
+ fi
+ done
+ if $test -s signal.ls1; then
+ $cat signal.nsg signal.ls1 |
+ $sort -n +1 | $uniq | $awk -f signal.awk >signal.lst
+ fi
+
+fi
+if $test -s signal.lst; then
+ :
+else
+ echo "(AAK! I can't compile the test programs -- Guessing)" >&4
echo 'kill -l' >signal
- set X \`csh -f <signal\`
+ set X `csh -f <signal`
$rm -f signal
shift
- case \$# in
+ case $# in
0) set HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM;;
esac
- echo \$@ | $tr ' ' '\012' | \
- $awk '{ printf \$1; printf " %d\n", ++s; }' >signal.lst
+ echo $@ | $tr ' ' $trnl | \
+ $awk '{ printf $1; printf " %d\n", ++s; }' >signal.lst
fi
-$rm -f signal.c signal signal$_o
+$rm -f signal.c signal$_exe signal$_o signal.nsg signal.ls1
EOS
chmod a+x signal_cmd
$eunicefix signal_cmd
case "$sig_name_init" in
'')
echo "Generating a list of signal names and numbers..." >&4
- ./signal_cmd
+ . ./signal_cmd
sig_name=`$awk '{printf "%s ", $1}' signal.lst`
sig_name="ZERO $sig_name"
sig_name_init=`$awk 'BEGIN { printf "\"ZERO\", " }
EOM
echo " "
set ssize
-if eval $compile && ./ssize > /dev/null; then
+if eval $compile_ok && ./ssize > /dev/null; then
ssizetype=`./ssize`
echo "I'll be using $ssizetype for functions returning a byte count." >&4
else
: see if time exists
echo " "
-if set time val -f d_time; eval $csym; $val; then
- echo 'time() found.' >&4
- val="$define"
- set time_t timetype long stdio.h sys/types.h
- eval $typedef
- dflt="$timetype"
- echo " "
- rp="What type is returned by time() on this system?"
- . ./myread
- timetype="$ans"
-else
- echo 'time() not found, hope that will do.' >&4
- val="$undef"
- timetype='int';
+if test "X$d_time" = X -o X"$timetype" = X; then
+ if set time val -f d_time; eval $csym; $val; then
+ echo 'time() found.' >&4
+ val="$define"
+ rp="What is the type returned by time() on this system?"
+ set time_t timetype long stdio.h sys/types.h
+ eval $typedef_ask
+ else
+ echo 'time() not found, hope that will do.' >&4
+ val="$undef"
+ timetype='int';
+ fi
+ set d_time
+ eval $setvar
fi
-set d_time
-eval $setvar
: see what type uids are declared as in the kernel
+echo " "
+echo "Looking for the type for user ids returned by getuid()."
set uid_t uidtype xxx stdio.h sys/types.h
eval $typedef
case "$uidtype" in
;;
*) dflt="$uidtype";;
esac
-echo " "
-rp="What is the type for user ids returned by getuid()?"
-. ./myread
-uidtype="$ans"
+case "$uidtype" in
+uid_t) echo "uid_t found." ;;
+*) rp="What is the type for user ids returned by getuid()?"
+ . ./myread
+ uidtype="$ans"
+ ;;
+esac
: see if dbm.h is available
: see if dbmclose exists
set i_fcntl
eval $setvar
-: see if this is an grp system
-set grp.h i_grp
-eval $inhdr
-
: see if locale.h is available
set locale.h i_locale
eval $inhdr
: get C preprocessor symbols handy
echo " "
$echo $n "Hmm... $c"
-echo $al | $tr ' ' '\012' >Cppsym.know
+echo $al | $tr ' ' $trnl >Cppsym.know
$cat <<EOSS >Cppsym
$startsh
case "\$1" in
case \$# in
0) exit 1;;
esac
-echo \$* | $tr ' ' '\012' | $sed -e 's/\(.*\)/\\
+echo \$* | $tr ' ' '$trnl' | $sed -e 's/\(.*\)/\\
#ifdef \1\\
exit 0; _ _ _ _\1\\ \1\\
#endif\\
EOS
chmod +x ccsym
$eunicefix ccsym
-./ccsym | $sort | $uniq >ccsym.raw
+./ccsym > ccsym1.raw
+if $test -s ccsym1.raw; then
+ $sort ccsym1.raw | $uniq >ccsym.raw
+else
+ mv ccsym1.raw ccsym.raw
+fi
+
$awk '/\=/ { print $0; next }
{ print $0"=1" }' ccsym.raw >ccsym.list
$awk '{ print $0"=1" }' Cppsym.true >ccsym.true
set stddef.h i_stddef
eval $inhdr
+: see if sys/access.h is available
+set sys/access.h i_sysaccess
+eval $inhdr
+
: see if ioctl defs are in sgtty, termio, sys/filio or sys/ioctl
set sys/filio.h i_sysfilio
eval $inhdr
set sys/resource.h i_sysresrc
eval $inhdr
-: see if sys/stat.h is available
-set sys/stat.h i_sysstat
-eval $inhdr
-
-: see if sys/types.h has to be included
-set sys/types.h i_systypes
+: see if sys/security.h is available
+set sys/security.h i_syssecrt
eval $inhdr
: see if this is a sys/un.h system
echo " "
echo "Looking for extensions..." >&4
-cd ../ext
+tdir=`pwd`
+cd $rsrc/ext
: If we are using the old config.sh, known_extensions may contain
: old or inaccurate or duplicate values.
known_extensions=''
+nonxs_extensions=''
: We do not use find because it might not be available.
: We do not just use MANIFEST because the user may have dropped
: some additional extensions into the source tree and expect them
: to be built.
for xxx in * ; do
- case "$xxx" in
- DynaLoader) ;;
- *) if $test -f $xxx/$xxx.xs; then
- known_extensions="$known_extensions $xxx"
- else
- if $test -d $xxx; then
- cd $xxx
- for yyy in * ; do
- if $test -f $yyy/$yyy.xs; then
- known_extensions="$known_extensions $xxx/$yyy"
- fi
- done
- cd ..
- fi
- fi ;;
- esac
+ case "$xxx" in
+ DynaLoader|dynaload) ;;
+ *) if $test -f $xxx/$xxx.xs; then
+ known_extensions="$known_extensions $xxx"
+ elif $test -f $xxx/Makefile.PL; then
+ nonxs_extensions="$nonxs_extensions $xxx"
+ else
+ if $test -d $xxx; then
+ # Look for nested extensions, eg. Devel/Dprof.
+ cd $xxx
+ for yyy in * ; do
+ if $test -f $yyy/$yyy.xs; then
+ known_extensions="$known_extensions $xxx/$yyy"
+ elif $test -f $yyy/Makefile.PL; then
+ nonxs_extensions="$nonxs_extensions $xxx/$yyy"
+ fi
+ done
+ cd ..
+ fi
+ fi
+ ;;
+ esac
done
+set X $nonxs_extensions
+shift
+nonxs_extensions="$*"
set X $known_extensions
shift
known_extensions="$*"
-cd ../UU
+cd $tdir
: Now see which are supported on this system.
avail_ext=''
for xxx in $known_extensions ; do
- case "$xxx" in
- DB_File|db_file) case "$i_db" in
- $define) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- GDBM_File|gdbm_fil) case "$i_gdbm" in
- $define) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- NDBM_File|ndbm_fil) case "$i_ndbm" in
- $define) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- ODBM_File|odbm_fil) case "${i_dbm}${i_rpcsvcdbm}" in
- *"${define}"*) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- POSIX|posix) case "$useposix" in
- true|define|y) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- Opcode|opcode) case "$useopcode" in
- true|define|y) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- Socket|socket) case "$d_socket" in
- true|$define|y) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- Thread|thread) case "$usethreads" in
- true|$define|y) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
- *) avail_ext="$avail_ext $xxx"
- ;;
- esac
+ case "$xxx" in
+ DB_File|db_file)
+ case "$i_db" in
+ $define) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ GDBM_File|gdbm_fil)
+ case "$i_gdbm" in
+ $define) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ NDBM_File|ndbm_fil)
+ case "$i_ndbm" in
+ $define) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ ODBM_File|odbm_fil)
+ case "${i_dbm}${i_rpcsvcdbm}" in
+ *"${define}"*) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ POSIX|posix)
+ case "$useposix" in
+ true|define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ Opcode|opcode)
+ case "$useopcode" in
+ true|define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ Socket|socket)
+ case "$d_socket" in
+ true|$define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ Thread|thread)
+ case "$usethreads" in
+ true|$define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ IPC/SysV|ipc/sysv)
+ : XXX Do we need a useipcsysv variable here
+ case "${d_msg}${d_sem}${d_shm}" in
+ *"${define}"*) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ *) avail_ext="$avail_ext $xxx"
+ ;;
+ esac
done
set X $avail_ext
shift
avail_ext="$*"
+: Now see which nonxs extensions are supported on this system.
+: For now assume all are.
+nonxs_ext=''
+for xxx in $nonxs_extensions ; do
+ case "$xxx" in
+ *) nonxs_ext="$nonxs_ext $xxx"
+ ;;
+ esac
+done
+
+set X $nonxs_ext
+shift
+nonxs_ext="$*"
+
case $usedl in
$define)
$cat <<EOM
compile these extensions for dynamic loading (the default), compile
them into the $package executable (static loading), or not include
them at all. Answer "none" to include no extensions.
+Note that DynaLoader is always built and need not be mentioned here.
EOM
case "$dynamic_ext" in
'') dflt="$avail_ext" ;;
- *) dflt="$dynamic_ext" ;;
+ *) dflt="$dynamic_ext"
+ # Perhaps we are reusing an old out-of-date config.sh.
+ case "$hint" in
+ previous)
+ if test X"$dynamic_ext" != X"$avail_ext"; then
+ $cat <<EOM
+NOTICE: Your previous config.sh list may be incorrect.
+The extensions now available to you are
+ ${avail_ext}
+but the default list from your previous config.sh is
+ ${dynamic_ext}
+
+EOM
+ fi
+ ;;
+ esac
+ ;;
esac
case "$dflt" in
'') dflt=none;;
$cat <<EOM
A number of extensions are supplied with $package. Answer "none"
to include no extensions.
+Note that DynaLoader is always built and need not be mentioned here.
EOM
case "$static_ext" in
'') dflt="$avail_ext" ;;
- *) dflt="$static_ext" ;;
- esac
+ *) dflt="$static_ext"
+ # Perhaps we are reusing an old out-of-date config.sh.
+ case "$hint" in
+ previous)
+ if test X"$static_ext" != X"$avail_ext"; then
+ $cat <<EOM
+NOTICE: Your previous config.sh list may be incorrect.
+The extensions now available to you are
+ ${avail_ext}
+but the default list from your previous config.sh is
+ ${static_ext}
+EOM
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ : Exclude those that are not xs extensions
case "$dflt" in
'') dflt=none;;
esac
;;
esac
-set X $dynamic_ext $static_ext
+set X $dynamic_ext $static_ext $nonxs_ext
shift
extensions="$*"
echo " "
echo "Stripping down executable paths..." >&4
for file in $loclist $trylist; do
- eval $file="\$file"
+ if test X$file != Xln -a X$file != Xar -o X$osname != Xos2; then
+ eval $file="\$file"
+ fi
done
;;
esac
_o='$_o'
afs='$afs'
alignbytes='$alignbytes'
+ansi2knr='$ansi2knr'
aphostname='$aphostname'
+apiversion='$apiversion'
ar='$ar'
archlib='$archlib'
archlibexp='$archlibexp'
+archname64='$archname64'
archname='$archname'
archobjs='$archobjs'
awk='$awk'
baserev='$baserev'
bash='$bash'
bin='$bin'
-bincompat3='$bincompat3'
binexp='$binexp'
bison='$bison'
byacc='$byacc'
csh='$csh'
d_Gconvert='$d_Gconvert'
d_access='$d_access'
+d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_archlib='$d_archlib'
d_attribut='$d_attribut'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
-d_bincompat3='$d_bincompat3'
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdsetpgrp='$d_bsdsetpgrp'
d_csh='$d_csh'
d_cuserid='$d_cuserid'
d_dbl_dig='$d_dbl_dig'
+d_dbmclose64='$d_dbmclose64'
+d_dbminit64='$d_dbminit64'
+d_delete64='$d_delete64'
d_difftime='$d_difftime'
+d_dirent64s='$d_dirent64s'
d_dirnamlen='$d_dirnamlen'
d_dlerror='$d_dlerror'
d_dlopen='$d_dlopen'
d_dlsymun='$d_dlsymun'
d_dosuid='$d_dosuid'
+d_drand48proto='$d_drand48proto'
d_dup2='$d_dup2'
+d_eaccess='$d_eaccess'
+d_endgrent='$d_endgrent'
+d_endhent='$d_endhent'
+d_endnent='$d_endnent'
+d_endpent='$d_endpent'
+d_endpwent='$d_endpwent'
+d_endsent='$d_endsent'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fchmod='$d_fchmod'
d_fd_macros='$d_fd_macros'
d_fd_set='$d_fd_set'
d_fds_bits='$d_fds_bits'
+d_fetch64='$d_fetch64'
+d_fgetpos64='$d_fgetpos64'
d_fgetpos='$d_fgetpos'
+d_firstkey64='$d_firstkey64'
d_flexfnam='$d_flexfnam'
+d_flock64s='$d_flock64s'
d_flock='$d_flock'
+d_fopen64='$d_fopen64'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
+d_freopen64='$d_freopen64'
+d_fseek64='$d_fseek64'
+d_fseeko64='$d_fseeko64'
+d_fseeko='$d_fseeko'
+d_fsetpos64='$d_fsetpos64'
d_fsetpos='$d_fsetpos'
+d_fstat64='$d_fstat64'
+d_ftell64='$d_ftell64'
+d_ftello64='$d_ftello64'
+d_ftello='$d_ftello'
d_ftime='$d_ftime'
+d_ftruncate64='$d_ftruncate64'
+d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_gethbyname='$d_gethbyname'
d_gethent='$d_gethent'
d_gethname='$d_gethname'
+d_gethostprotos='$d_gethostprotos'
d_getlogin='$d_getlogin'
d_getnbyaddr='$d_getnbyaddr'
+d_getnbyname='$d_getnbyname'
+d_getnent='$d_getnent'
+d_getnetprotos='$d_getnetprotos'
+d_getpbyname='$d_getpbyname'
+d_getpbynumber='$d_getpbynumber'
+d_getpent='$d_getpent'
d_getpgid='$d_getpgid'
d_getpgrp2='$d_getpgrp2'
d_getpgrp='$d_getpgrp'
d_getppid='$d_getppid'
d_getprior='$d_getprior'
+d_getprotoprotos='$d_getprotoprotos'
+d_getpwent='$d_getpwent'
+d_getsbyname='$d_getsbyname'
+d_getsbyport='$d_getsbyport'
+d_getsent='$d_getsent'
+d_getservprotos='$d_getservprotos'
d_gettimeod='$d_gettimeod'
d_gnulibc='$d_gnulibc'
+d_grpasswd='$d_grpasswd'
d_htonl='$d_htonl'
d_index='$d_index'
d_inetaton='$d_inetaton'
+d_ino64t='$d_ino64t'
+d_int64t='$d_int64t'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
+d_lchown='$d_lchown'
d_link='$d_link'
d_locconv='$d_locconv'
+d_lockf64='$d_lockf64'
d_lockf='$d_lockf'
+d_longdbl='$d_longdbl'
+d_longlong='$d_longlong'
+d_lseek64='$d_lseek64'
+d_lstat64='$d_lstat64'
d_lstat='$d_lstat'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_msgrcv='$d_msgrcv'
d_msgsnd='$d_msgsnd'
d_mymalloc='$d_mymalloc'
+d_nextkey64='$d_nextkey64'
d_nice='$d_nice'
+d_off64t='$d_off64t'
+d_oldpthreads='$d_oldpthreads'
d_oldsock='$d_oldsock'
d_open3='$d_open3'
+d_open64='$d_open64'
+d_opendir64='$d_opendir64'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
d_phostname='$d_phostname'
d_pwclass='$d_pwclass'
d_pwcomment='$d_pwcomment'
d_pwexpire='$d_pwexpire'
+d_pwgecos='$d_pwgecos'
+d_pwpasswd='$d_pwpasswd'
d_pwquota='$d_pwquota'
+d_readdir64='$d_readdir64'
d_readdir='$d_readdir'
d_readlink='$d_readlink'
d_rename='$d_rename'
d_safemcpy='$d_safemcpy'
d_sanemcmp='$d_sanemcmp'
d_sched_yield='$d_sched_yield'
+d_seekdir64='$d_seekdir64'
d_seekdir='$d_seekdir'
d_select='$d_select'
d_sem='$d_sem'
d_semctl='$d_semctl'
+d_semctl_semid_ds='$d_semctl_semid_ds'
+d_semctl_semun='$d_semctl_semun'
d_semget='$d_semget'
d_semop='$d_semop'
d_setegid='$d_setegid'
d_seteuid='$d_seteuid'
+d_setgrent='$d_setgrent'
d_setgrps='$d_setgrps'
+d_sethent='$d_sethent'
d_setlinebuf='$d_setlinebuf'
d_setlocale='$d_setlocale'
+d_setnent='$d_setnent'
+d_setpent='$d_setpent'
d_setpgid='$d_setpgid'
d_setpgrp2='$d_setpgrp2'
d_setpgrp='$d_setpgrp'
d_setprior='$d_setprior'
+d_setpwent='$d_setpwent'
d_setregid='$d_setregid'
d_setresgid='$d_setresgid'
d_setresuid='$d_setresuid'
d_setreuid='$d_setreuid'
d_setrgid='$d_setrgid'
d_setruid='$d_setruid'
+d_setsent='$d_setsent'
d_setsid='$d_setsid'
+d_setvbuf='$d_setvbuf'
d_sfio='$d_sfio'
d_shm='$d_shm'
d_shmat='$d_shmat'
d_sigsetjmp='$d_sigsetjmp'
d_socket='$d_socket'
d_sockpair='$d_sockpair'
+d_stat64='$d_stat64'
d_statblks='$d_statblks'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
+d_store64='$d_store64'
d_strchr='$d_strchr'
d_strcoll='$d_strcoll'
d_strctcpy='$d_strctcpy'
d_system='$d_system'
d_tcgetpgrp='$d_tcgetpgrp'
d_tcsetpgrp='$d_tcsetpgrp'
+d_telldir64='$d_telldir64'
d_telldir='$d_telldir'
d_time='$d_time'
d_times='$d_times'
+d_tmpfile64='$d_tmpfile64'
+d_truncate64='$d_truncate64'
d_truncate='$d_truncate'
d_tzname='$d_tzname'
d_umask='$d_umask'
d_uname='$d_uname'
+d_union_semun='$d_union_semun'
d_vfork='$d_vfork'
d_void_closedir='$d_void_closedir'
d_voidsig='$d_voidsig'
direntrytype='$direntrytype'
dlext='$dlext'
dlsrc='$dlsrc'
+doublesize='$doublesize'
+drand01='$drand01'
dynamic_ext='$dynamic_ext'
eagain='$eagain'
+ebcdic='$ebcdic'
echo='$echo'
egrep='$egrep'
emacs='$emacs'
freetype='$freetype'
full_csh='$full_csh'
full_sed='$full_sed'
-gcc='$gcc'
gccversion='$gccversion'
gidtype='$gidtype'
glibpth='$glibpth'
hint='$hint'
hostcat='$hostcat'
huge='$huge'
+i_arpainet='$i_arpainet'
i_bsdioctl='$i_bsdioctl'
i_db='$i_db'
i_dbm='$i_dbm'
i_float='$i_float'
i_gdbm='$i_gdbm'
i_grp='$i_grp'
+i_inttypes='$i_inttypes'
i_limits='$i_limits'
i_locale='$i_locale'
i_malloc='$i_malloc'
i_stddef='$i_stddef'
i_stdlib='$i_stdlib'
i_string='$i_string'
+i_sysaccess='$i_sysaccess'
i_sysdir='$i_sysdir'
i_sysfile='$i_sysfile'
i_sysfilio='$i_sysfilio'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
i_sysresrc='$i_sysresrc'
+i_syssecrt='$i_syssecrt'
i_sysselct='$i_sysselct'
i_syssockio='$i_syssockio'
i_sysstat='$i_sysstat'
i_varargs='$i_varargs'
i_varhdr='$i_varhdr'
i_vfork='$i_vfork'
+ignore_versioned_solibs='$ignore_versioned_solibs'
incpath='$incpath'
inews='$inews'
installarchlib='$installarchlib'
lns='$lns'
locincpth='$locincpth'
loclibpth='$loclibpth'
+longdblsize='$longdblsize'
+longlongsize='$longlongsize'
longsize='$longsize'
lp='$lp'
lpr='$lpr'
ls='$ls'
+lseeksize='$lseeksize'
lseektype='$lseektype'
mail='$mail'
mailx='$mailx'
netdb_host_type='$netdb_host_type'
netdb_name_type='$netdb_name_type'
netdb_net_type='$netdb_net_type'
+nm='$nm'
nm_opt='$nm_opt'
nm_so_opt='$nm_so_opt'
+nonxs_ext='$nonxs_ext'
nroff='$nroff'
o_nonblock='$o_nonblock'
obj_ext='$obj_ext'
privlib='$privlib'
privlibexp='$privlibexp'
prototype='$prototype'
+ptrsize='$ptrsize'
randbits='$randbits'
+randfunc='$randfunc'
+randseedtype='$randseedtype'
ranlib='$ranlib'
rd_nodata='$rd_nodata'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
+sched_yield='$sched_yield'
scriptdir='$scriptdir'
scriptdirexp='$scriptdirexp'
sed='$sed'
+seedfunc='$seedfunc'
+selectminbits='$selectminbits'
selecttype='$selecttype'
sendmail='$sendmail'
sh='$sh'
tail='$tail'
tar='$tar'
tbl='$tbl'
+tee='$tee'
test='$test'
timeincl='$timeincl'
timetype='$timetype'
touch='$touch'
tr='$tr'
+trnl='$trnl'
troff='$troff'
uidtype='$uidtype'
uname='$uname'
uniq='$uniq'
+use64bits='$use64bits'
usedl='$usedl'
+usemultiplicity='$usemultiplicity'
usemymalloc='$usemymalloc'
usenm='$usenm'
useopcode='$useopcode'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+version='$version'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
zip='$zip'
EOT
+: Add in command line options if available
+$test -f UU/cmdline.opt && $cat UU/cmdline.opt >> config.sh
+
: add special variables
$test -f $src/patchlevel.h && \
awk '/^#define/ {printf "%s=%s\n",$2,$3}' $src/patchlevel.h >>config.sh
*)
$cat <<EOM
-Now you need to generate make dependencies by running "make depend".
-You might prefer to run it in background: "make depend > makedepend.out &"
+Now you need to generate make dependencies by running "$make depend".
+You might prefer to run it in background: "$make depend > makedepend.out &"
It can take a while, so you might not want to run it right now.
EOM
;;
esac
- rp="Run make depend now?"
+ rp="Run $make depend now?"
. UU/myread
case "$ans" in
y*)
- make depend && echo "Now you must run a make."
+ $make depend && echo "Now you must run a $make."
;;
*)
- echo "You must run 'make depend' then 'make'."
+ echo "You must run '$make depend' then '$make'."
;;
esac
elif test -f [Mm]akefile; then
echo " "
- echo "Now you must run a make."
+ echo "Now you must run a $make."
else
echo "Done."
fi
+if $test -f Policy.sh; then
+ $cat <<EOM
+
+If you compile $package on a different machine or from a different object
+directory, copy the Policy.sh file from this object directory to the
+new one before you run Configure -- this will help you with most of
+the policy defaults.
+
+EOM
+fi
+if $test -f config.msg; then
+ echo "Hmm. I also noted the following information while running:"
+ echo " "
+ $cat config.msg >&4
+ $rm -f config.msg
+fi
$rm -f kit*isdone ark*isdone
$rm -rf UU