# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Mon Feb 14 06:52:21 EET 2000 [metaconfig 3.0 PL70]
-# (with additional metaconfig patches by perlbug@perl.com)
+# Generated on Tue Oct 24 21:00:34 EET DST 2000 [metaconfig 3.0 PL70]
+# (with additional metaconfig patches by perlbug@perl.org)
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
test -d UU || mkdir UU
cd UU && rm -f ./*
+ccname=''
+ccversion=''
ccsymbols=''
cppccsymbols=''
cppsymbols=''
+perllibs=''
dynamic_ext=''
extensions=''
known_extensions=''
d_bincompat5005=''
byteorder=''
cc=''
-gccversion=''
ccflags=''
cppflags=''
ldflags=''
d_endpent=''
d_endpwent=''
d_endsent=''
-d_endspent=''
d_fchmod=''
d_fchown=''
d_fcntl=''
d_flexfnam=''
d_flock=''
d_fork=''
+d_fpos64_t=''
+d_frexpl=''
d_fs_data_s=''
d_fseeko=''
d_fsetpos=''
d_gettimeod=''
d_Gconvert=''
d_getcwd=''
+d_getespwnam=''
+d_getfsstat=''
d_getgrent=''
d_getgrps=''
d_gethbyaddr=''
d_getpbyname=''
d_getpbynumber=''
d_getprotoprotos=''
+d_getprpwnam=''
d_getpwent=''
d_getsent=''
d_getservprotos=''
-d_getspent=''
d_getspnam=''
d_getsbyname=''
d_getsbyport=''
d_htonl=''
d_iconv=''
d_inetaton=''
-d_int64t=''
+d_int64_t=''
d_isascii=''
+d_isnan=''
+d_isnanl=''
d_killpg=''
d_lchown=''
d_ldbl_dig=''
longdblsize=''
d_longlong=''
longlongsize=''
+d_lseekproto=''
d_lstat=''
+d_madvise=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
d_mktime=''
d_mmap=''
mmaptype=''
+d_modfl=''
d_mprotect=''
d_msg=''
d_msgctl=''
d_msync=''
d_munmap=''
d_nice=''
+d_off64_t=''
d_open3=''
d_fpathconf=''
d_pathconf=''
d_pthread_yield=''
d_sched_yield=''
sched_yield=''
+d_qgcvt=''
d_readdir=''
d_rewinddir=''
d_seekdir=''
d_bsdsetpgrp=''
d_setpgrp=''
d_setprior=''
+d_setproctitle=''
d_setpwent=''
d_setregid=''
d_setresgid=''
d_setruid=''
d_setsent=''
d_setsid=''
-d_setspent=''
d_setvbuf=''
d_sfio=''
usesfio=''
d_sockpair=''
sockethdr=''
socketlib=''
+d_socklen_t=''
+d_socks5_init=''
d_sqrtl=''
d_statblks=''
d_statfs_f_flags=''
d_statvfs=''
d_stdio_cnt_lval=''
d_stdio_ptr_lval=''
+d_stdio_ptr_lval_nochange_cnt=''
+d_stdio_ptr_lval_sets_cnt=''
d_stdiobase=''
d_stdstdio=''
stdio_base=''
fflushall=''
fpossize=''
fpostype=''
+gccosandvers=''
+gccversion=''
gidformat=''
gidsign=''
gidsize=''
d_grpasswd=''
i_grp=''
i_iconv=''
+i_ieeefp=''
i_inttypes=''
+i_libutil=''
i_limits=''
i_locale=''
i_machcthr=''
i_niin=''
i_sysin=''
i_poll=''
+i_prot=''
i_pthread=''
d_pwage=''
d_pwchange=''
i_stdlib=''
i_string=''
strings=''
+i_sunmath=''
i_sysaccess=''
i_sysdir=''
i_sysfile=''
i_syssockio=''
i_syslog=''
i_sysmman=''
+i_sysmode=''
i_sysmount=''
i_sysndir=''
i_sysparam=''
i_systypes=''
i_sysuio=''
i_sysun=''
+i_sysutsname=''
i_sysvfs=''
i_syswait=''
i_sgtty=''
intsize=''
longsize=''
shortsize=''
-d_fpos64_t=''
-d_off64_t=''
libc=''
ldlibpthname=''
libperl=''
libsdirs=''
libsfiles=''
libsfound=''
+libspath=''
lns=''
-d_PRIEldbl=''
-d_PRIFldbl=''
-d_PRIGldbl=''
+d_PRIEUldbl=''
+d_PRIFUldbl=''
+d_PRIGUldbl=''
d_PRIeldbl=''
d_PRIfldbl=''
d_PRIgldbl=''
-sPRIEldbl=''
-sPRIFldbl=''
-sPRIGldbl=''
+d_SCNfldbl=''
+sPRIEUldbl=''
+sPRIFUldbl=''
+sPRIGUldbl=''
sPRIeldbl=''
sPRIfldbl=''
sPRIgldbl=''
+sSCNfldbl=''
lseeksize=''
lseektype=''
make_set_make=''
man3dir=''
man3direxp=''
man3ext=''
-huge=''
-large=''
-medium=''
-models=''
-small=''
-split=''
modetype=''
multiarch=''
mydomain=''
passcat=''
orderlib=''
ranlib=''
+d_perl_otherlibdirs=''
+otherlibdirs=''
package=''
spackage=''
pager=''
api_version=''
api_versionstring=''
patchlevel=''
+revision=''
subversion=''
version=''
+perl5=''
perladmin=''
perlpath=''
d_nv_preserves_uv=''
+d_nv_preserves_uv_bits=''
i16size=''
i16type=''
i32size=''
uvsize=''
uvtype=''
ivdformat=''
+nvEUformat=''
+nvFUformat=''
+nvGUformat=''
+nveformat=''
+nvfformat=''
+nvgformat=''
+uvXUformat=''
uvoformat=''
uvuformat=''
uvxformat=''
privlibexp=''
prototype=''
ptrsize=''
-d_PRIX64=''
+d_PRIXU64=''
d_PRId64=''
d_PRIi64=''
d_PRIo64=''
d_PRIu64=''
d_PRIx64=''
-sPRIX64=''
+sPRIXU64=''
sPRId64=''
sPRIi64=''
sPRIo64=''
sitebinexp=''
installsitelib=''
sitelib=''
+sitelib_stem=''
sitelibexp=''
siteprefix=''
siteprefixexp=''
+sizesize=''
sizetype=''
so=''
+socksizetype=''
sharpbang=''
shsharp=''
spitshell=''
uidsize=''
uidtype=''
archname64=''
-use64bits=''
+use64bitall=''
+use64bitint=''
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
uselargefiles=''
uselongdouble=''
usemorebits=''
incpath=''
mips_type=''
usrinc=''
+d_vendorarch=''
+installvendorarch=''
+vendorarch=''
+vendorarchexp=''
d_vendorbin=''
installvendorbin=''
vendorbin=''
d_vendorlib=''
installvendorlib=''
vendorlib=''
+vendorlib_stem=''
vendorlibexp=''
usevendorprefix=''
vendorprefix=''
vendorprefixexp=''
+versiononly=''
defvoidused=''
voidflags=''
pm_apiversion=''
fi
i_whoami=''
+ccname=''
+ccversion=''
+perllibs=''
: set useposix=false in your hint file to disable the POSIX extension.
useposix=true
: set useopcode=false in your hint file to disable the Opcode extension.
_exe=''
: Extra object files, if any, needed on this platform.
archobjs=''
+archname=''
: Possible local include directories to search.
: Set locincpth to "" in a hint file to defeat local include searches.
locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
groupstype=''
: change the next line if compiling for Xenix/286 on Xenix/386
xlibpth='/usr/lib/386 /lib/386'
-
: Possible local library directories to search.
loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
: general looking path for locating libraries
-glibpth="/shlib /usr/shlib /lib/pa20_64 /lib/pa1.1 /usr/lib/large"
-glibpth="$glibpth /lib /usr/lib $xlibpth"
-glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
+glibpth="/lib /usr/lib $xlibpth"
glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
+test -f /usr/shlib/libc.so && glibpth="/usr/shlib $glibpth"
+test -f /shlib/libc.so && glibpth="/shlib $glibpth"
: Private path used by Configure to find libraries. Its value
: is prepended to libpth. This variable takes care of special
libswanted=''
: some systems want to use only the non-versioned libso:s
ignore_versioned_solibs=''
+archname64=''
+ccflags_uselargefiles=''
+ldflags_uselargefiles=''
+libswanted_uselargefiles=''
: set usemultiplicity on the Configure command line to enable multiplicity.
: set usesocks on the Configure command line to enable socks.
: set usethreads on the Configure command line to enable threads.
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
-libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
+libswanted='sfio socket bind inet nsl nm ndbm gdbm dbm db malloc dl'
libswanted="$libswanted dld ld sun m c cposix posix"
libswanted="$libswanted ndir dir crypt sec"
-libswanted="$libswanted ucb bsd BSD PW x"
+libswanted="$libswanted ucb bsd BSD PW x iconv util"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
glibpth=`echo " $glibpth " | sed -e 's! /usr/shlib ! !'`
$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Perl Maintainers) at perlbug@perl.com and
+Please contact me (Perl Maintainers) at perlbug@perl.org and
we'll try to straighten this all out.
EOM
exit 1
case "$fastread$alldone" in
yescont|yesexit) ;;
*)
- if test ! -t 0; then
- echo "Say 'sh Configure', not 'sh <Configure'"
- exit 1
- fi
+ case "$extractsh" in
+ true) ;;
+ *)
+ if test ! -t 0; then
+ echo "Say 'sh Configure', not 'sh <Configure'"
+ exit 1
+ fi
+ ;;
+ esac
;;
esac
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (perlbug@perl.com).
+and contact the author (perlbug@perl.org).
EOM
echo $n "Continue? [n] $c" >&4
You may safely delete it if you wish.
EOF
+xversion=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+case "$usedevel" in
+$define|true|[yY]*) ;;
+*) case "$xversion" in
+ *[13579])
+ cat >&4 <<EOH
+*** WHOA THERE!!! ***
+
+ This is an UNSTABLE DEVELOPMENT release.
+ The version of this $package distribution is $xversion, that is, odd,
+ (as opposed to even) and that signifies a development release.
+ If you want a maintenance release, you want an even-numbered version.
+
+ Do ***NOT*** install this into production use.
+ Data corruption and crashes are possible.
+
+ It is most seriously suggested that you do not continue any further
+ unless you want to help in developing and debugging Perl.
+
+EOH
+ rp='Do you really want to continue?'
+ dflt='n'
+ . ./myread
+ case "$ans" in
+ [yY]) echo >&4 "Okay, continuing." ;;
+ *) echo >&4 "Okay, bye."
+ exit 1
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
: general instructions
needman=true
firsttime=true
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (perlbug@perl.com) know how I blew it.
+have, let me (perlbug@perl.org) know how I blew it.
This installation script affects things in two ways:
more
nm
nroff
-perl
pg
test
uname
;;
esac
+cat <<EOS >checkcc
+$startsh
+EOS
+cat <<'EOSC' >>checkcc
+case "$cc" in
+'') ;;
+*) $rm -f try try.*
+ $cat >try.c <<EOM
+int main(int argc, char *argv[]) {
+ return 0;
+}
+EOM
+ if $cc -o try $ccflags try.c; then
+ :
+ else
+ echo "Uh-oh, the C compiler '$cc' doesn't seem to be working." >&4
+ despair=yes
+ trygcc=yes
+ case "$cc" in
+ *gcc*) trygcc=no ;;
+ esac
+ case "`$cc -v -c try.c 2>&1`" in
+ *gcc*) trygcc=no ;;
+ esac
+ if $test X"$trygcc" = Xyes; then
+ if gcc -o try -c try.c; then
+ echo " "
+ echo "You seem to have a working gcc, though." >&4
+ rp="Would you like to use it?"
+ dflt=y
+ if $test -f myread; then
+ . ./myread
+ else
+ if $test -f UU/myread; then
+ . ./UU/myread
+ else
+ echo "Cannot find myread, sorry. Aborting." >&2
+ exit 1
+ fi
+ fi
+ case "$ans" in
+ [yY]*) cc=gcc; ccname=gcc; ccflags=''; despair=no ;;
+ esac
+ fi
+ fi
+ if $test X"$despair" = Xyes; then
+ $cat >&4 <<EOM
+You need to find a working C compiler.
+Either (purchase and) install the C compiler supplied by your OS vendor,
+or for a free C compiler try http://gcc.gnu.org/
+I cannot continue any further, aborting.
+EOM
+ exit 1
+ fi
+ fi
+ $rm -f try try.*
+ ;;
+esac
+EOSC
+
: determine whether symbolic links are supported
echo " "
$touch blurfl
;;
esac
fi
+. ./UU/checkcc
if test ! -f config.sh; then
$cat <<EOM
(cd $src/hints; ls -C *.sh) | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to perlbug@perl.com
+ : tests or hints, please send them to perlbug@perl.org
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
esac
;;
next*) osname=next ;;
+ NonStop-UX) osname=nonstopux ;;
POSIX-BC | posix-bc ) osname=posix-bc
osvers="$3"
;;
osf1|mls+) case "$5" in
alpha)
osname=dec_osf
- osvers=`echo "$3" | sed 's/^[xvt]//'`
+ osvers=`sizer -v | awk '{print $3}' | tr '[A-Z]' '[a-z]' | sed 's/^[xvt]//'`
+ case "$osvers" in
+ [1-9].[0-9]*) ;;
+ *) osvers=`echo "$3" | sed 's/^[xvt]//'` ;;
+ esac
;;
hp*) osname=hp_osf1 ;;
mips) osname=mips_osf1 ;;
: specified already.
case "$hintfile" in
''|' ')
- file=`echo "${osname}_${osvers}" | $sed -e 's@\.@_@g' -e 's@_$@@'`
+ file=`echo "${osname}_${osvers}" | $sed -e 's%\.%_%g' -e 's%_$%%'`
: Also try without trailing minor version numbers.
- xfile=`echo $file | $sed -e 's@_[^_]*$@@'`
- xxfile=`echo $xfile | $sed -e 's@_[^_]*$@@'`
- xxxfile=`echo $xxfile | $sed -e 's@_[^_]*$@@'`
- xxxxfile=`echo $xxxfile | $sed -e 's@_[^_]*$@@'`
+ xfile=`echo $file | $sed -e 's%_[^_]*$%%'`
+ xxfile=`echo $xfile | $sed -e 's%_[^_]*$%%'`
+ xxxfile=`echo $xxfile | $sed -e 's%_[^_]*$%%'`
+ xxxxfile=`echo $xxxfile | $sed -e 's%_[^_]*$%%'`
case "$file" in
'') dflt=none ;;
*) case "$osvers" in
*) eval "$var=$val";;
esac'
+case "$usethreads" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
cat <<EOM
Perl can be built to take advantage of threads on some systems.
-To do so, Configure must be run with -Dusethreads.
+To do so, Configure can be run with -Dusethreads.
Note that threading is a highly experimental feature, and
some known race conditions still remain. If you choose to try
it, be very sure to not actually deploy it for production
purposes. README.threads has more details, and is required
reading if you enable threads.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-case "$usethreads" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
rp='Build a threading Perl?'
. ./myread
case "$ans" in
EOM
val="$define"
;;
-*)
- echo 'Normally you do not need this and you should answer no.'
- case "$usemultiplicity" in
+*) case "$usemultiplicity" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
+ echo " "
+ echo "If this doesn't make any sense to you, just accept the default '$dflt'."
rp='Build Perl for multiplicity?'
. ./myread
case "$ans" in
set usemultiplicity
eval $setvar
-: determine where manual pages are on this system
-echo " "
-case "$sysman" in
-'')
- syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
- syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
- syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
- syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
- syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
- sysman=`./loc . /usr/man/man1 $syspath`
- ;;
-esac
-if $test -d "$sysman"; then
- echo "System manual is in $sysman." >&4
-else
- echo "Could not find manual pages in source form." >&4
-fi
-
-: see what memory models we can support
-case "$models" in
-'')
- $cat >pdp11.c <<'EOP'
-int main() {
-#ifdef pdp11
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOP
- ( cc -o pdp11 pdp11.c ) >/dev/null 2>&1
- if $test -f pdp11 && ./pdp11 2>/dev/null; then
- dflt='unsplit split'
- else
- tans=`./loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
- case "$tans" in
- X) dflt='none';;
- *) if $test -d /lib/small || $test -d /usr/lib/small; then
- dflt='small'
- else
- dflt=''
- fi
- if $test -d /lib/medium || $test -d /usr/lib/medium; then
- dflt="$dflt medium"
- fi
- if $test -d /lib/large || $test -d /usr/lib/large; then
- dflt="$dflt large"
- fi
- if $test -d /lib/huge || $test -d /usr/lib/huge; then
- dflt="$dflt huge"
- fi
- esac
- fi;;
-*) dflt="$models";;
-esac
-$cat <<EOM
-
-Some systems have different model sizes. On most systems they are called
-small, medium, large, and huge. On the PDP11 they are called unsplit and
-split. If your system doesn't support different memory models, say "none".
-If you wish to force everything to one memory model, say "none" here and
-put the appropriate flags later when it asks you for other cc and ld flags.
-Venix systems may wish to put "none" and let the compiler figure things out.
-(In the following question multiple model names should be space separated.)
-
-The default for most systems is "none".
-
-EOM
-rp="Which memory models are supported?"
-. ./myread
-models="$ans"
-
-case "$models" in
-none)
- small=''
- medium=''
- large=''
- huge=''
- unsplit=''
- split=''
- ;;
-*split)
- case "$split" in
- '') if $contains '\-i' $sysman/ld.1 >/dev/null 2>&1 || \
- $contains '\-i' $sysman/cc.1 >/dev/null 2>&1; then
- dflt='-i'
- else
- dflt='none'
- fi;;
- *) dflt="$split";;
- esac
- rp="What flag indicates separate I and D space?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';;
- esac
- split="$tans"
- unsplit='';;
-*large*|*small*|*medium*|*huge*)
- case "$models" in
- *large*)
- case "$large" in
- '') dflt='-Ml';;
- *) dflt="$large";;
- esac
- rp="What flag indicates large model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- large="$tans";;
- *) large='';;
- esac
- case "$models" in
- *huge*) case "$huge" in
- '') dflt='-Mh';;
- *) dflt="$huge";;
- esac
- rp="What flag indicates huge model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- huge="$tans";;
- *) huge="$large";;
- esac
- case "$models" in
- *medium*) case "$medium" in
- '') dflt='-Mm';;
- *) dflt="$medium";;
- esac
- rp="What flag indicates medium model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- medium="$tans";;
- *) medium="$large";;
- esac
- case "$models" in
- *small*) case "$small" in
- '') dflt='none';;
- *) dflt="$small";;
- esac
- rp="What flag indicates small model?"
- . ./myread
- tans="$ans"
- case "$tans" in
- none) tans='';
- esac
- small="$tans";;
- *) small='';;
- esac
- ;;
-*)
- echo "Unrecognized memory models--you may have to edit Makefile.SH" >&4
- ;;
-esac
-$rm -f pdp11.* pdp11
-
: make some quick guesses about what we are up against
echo " "
$echo $n "Hmm... $c"
;;
esac
: Detect OS2. The p_ variable is set above in the Head.U unit.
+: Note that this also -- wrongly -- detects e.g. dos-djgpp, which also uses
+: semicolon as a patch separator
case "$p_" in
:) ;;
*)
$cat <<'EOI'
I have the feeling something is not exactly right, however...don't tell me...
lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
+(Or you may be running DOS with DJGPP.)
EOI
echo exit 0 >os2
;;
$eunicefix bsd usg v7 osf1 eunice xenix venix os2
$rm -f foo
-: see if we need a special compiler
-echo " "
-if ./usg; then
- case "$cc" in
- '') case "$Mcc" in
- /*) dflt='Mcc';;
- *) case "$large" in
- -M*) dflt='cc';;
- *) if $contains '\-M' $sysman/cc.1 >/dev/null 2>&1 ; then
- if $contains '\-M' $sysman/cpp.1 >/dev/null 2>&1; then
- dflt='cc'
- else
- dflt='cc -M'
- fi
- else
- dflt='cc'
- fi;;
- esac;;
- esac;;
- *) dflt="$cc";;
- esac
- case "$dflt" in
- *M*) $cat <<'EOM'
-On some older systems the default C compiler will not resolve multiple global
-references that happen to have the same name. On some such systems the "Mcc"
-command may be used to force these to be resolved. On other systems a "cc -M"
-command is required. (Note that the -M flag on other systems indicates a
-memory model to use!) If you have the Gnu C compiler, you might wish to use
-that instead.
-
-EOM
- ;;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-else
- case "$cc" in
- '') dflt=cc;;
- *) dflt="$cc";;
- esac
- rp="Use which C compiler?"
- . ./myread
- cc="$ans"
-fi
+case "$cc" in
+'') dflt=cc;;
+*) dflt="$cc";;
+esac
+rp="Use which C compiler?"
+. ./myread
+cc="$ans"
: Look for a hint-file generated 'call-back-unit'. Now that the
: user has specified the compiler, we may need to set or change some
: other defaults.
if $test -f cc.cbu; then
. ./cc.cbu
fi
+. ./checkcc
+
echo " "
echo "Checking for GNU cc in disguise and/or its version number..." >&4
$cat >gccvers.c <<EOM
exit(0);
}
EOM
-if $cc -o gccvers gccvers.c; then
+if $cc -o gccvers $ldflags gccvers.c; then
gccversion=`./gccvers`
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
*) echo "You are using GNU cc $gccversion."
+ ccname=gcc
;;
esac
else
case "$gccversion" in
1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
esac
+case "$gccversion" in
+'') gccosandvers='' ;;
+*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
+ gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
+ gccshortvers=''
+ case "$gccosandvers" in
+ $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
+ $osname$osvers) ;; # looking good
+ $osname*) cat <<EOM >&4
-: decide how portable to be. Allow command line overrides.
-case "$d_portable" in
-"$undef") ;;
-*) d_portable="$define" ;;
-esac
-
-: set up shell script to do ~ expansion
-cat >filexp <<EOSS
-$startsh
-: expand filename
-case "\$1" in
- ~/*|~)
- echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
- ;;
- ~*)
- if $test -f /bin/csh; then
- /bin/csh -f -c "glob \$1"
- failed=\$?
- echo ""
- exit \$failed
- else
- name=\`$expr x\$1 : '..\([^/]*\)'\`
- dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
- if $test ! -d "\$dir"; then
- me=\`basename \$0\`
- echo "\$me: can't locate home directory for: \$name" >&2
- exit 1
- fi
- case "\$1" in
- */*)
- echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
- ;;
- *)
- echo \$dir
- ;;
- esac
- fi
- ;;
-*)
- echo \$1
- ;;
-esac
-EOSS
-chmod +x filexp
-$eunicefix filexp
-
-: now set up to get a file name
-cat <<EOS >getfile
-$startsh
-EOS
-cat <<'EOSC' >>getfile
-tilde=''
-fullpath=''
-already=''
-skip=''
-none_ok=''
-exp_file=''
-nopath_ok=''
-orig_rp="$rp"
-orig_dflt="$dflt"
-case "$gfpth" in
-'') gfpth='.' ;;
-esac
+*** WHOA THERE!!! ***
-case "$fn" in
-*\(*)
- expr $fn : '.*(\(.*\)).*' | tr ',' $trnl >getfile.ok
- fn=`echo $fn | sed 's/(.*)//'`
- ;;
-esac
+ Your gcc has not been compiled for the exact release of
+ your operating system ($gccosandvers versus $osname$osvers).
-case "$fn" in
-*:*)
- loc_file=`expr $fn : '.*:\(.*\)'`
- fn=`expr $fn : '\(.*\):.*'`
- ;;
-esac
+ In general it is a good idea to keep gcc synchronized with
+ the operating system because otherwise serious problems
+ may ensue when trying to compile software, like Perl.
-case "$fn" in
-*~*) tilde=true;;
-esac
-case "$fn" in
-*/*) fullpath=true;;
-esac
-case "$fn" in
-*+*) skip=true;;
-esac
-case "$fn" in
-*n*) none_ok=true;;
-esac
-case "$fn" in
-*e*) exp_file=true;;
-esac
-case "$fn" in
-*p*) nopath_ok=true;;
-esac
+ I'm trying to be optimistic here, though, and will continue.
+ If later during the configuration and build icky compilation
+ problems appear (headerfile conflicts being the most common
+ manifestation), I suggest reinstalling the gcc to match
+ your operating system release.
-case "$fn" in
-*f*) type='File';;
-*d*) type='Directory';;
-*l*) type='Locate';;
+EOM
+ ;;
+ *) gccosandvers='' ;; # failed to parse, better be silent
+ esac
+ ;;
esac
-
-what="$type"
-case "$what" in
-Locate) what='File';;
-esac
-
-case "$exp_file" in
-'')
- case "$d_portable" in
- "$define") ;;
- *) exp_file=true;;
- esac
- ;;
-esac
-
-cd ..
-while test "$type"; do
- redo=''
- rp="$orig_rp"
- dflt="$orig_dflt"
- case "$tilde" in
- true) rp="$rp (~name ok)";;
- esac
- . UU/myread
- if test -f UU/getfile.ok && \
- $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
- then
- value="$ans"
- ansexp="$ans"
- break
- fi
- case "$ans" in
- none)
- value=''
- ansexp=''
- case "$none_ok" in
- true) type='';;
- esac
- ;;
- *)
- case "$tilde" in
- '') value="$ans"
- ansexp="$ans";;
- *)
- value=`UU/filexp $ans`
- case $? in
- 0)
- if test "$ans" != "$value"; then
- echo "(That expands to $value on this system.)"
- fi
- ;;
- *) value="$ans";;
- esac
- ansexp="$value"
- case "$exp_file" in
- '') value="$ans";;
- esac
- ;;
- esac
- case "$fullpath" in
- true)
- case "$ansexp" in
- /*) value="$ansexp" ;;
- *)
- redo=true
- case "$already" in
- true)
- echo "I shall only accept a full path name, as in /bin/ls." >&4
- echo "Use a ! shell escape if you wish to check pathnames." >&4
- ;;
- *)
- echo "Please give a full path name, starting with slash." >&4
- case "$tilde" in
- true)
- echo "Note that using ~name is ok provided it expands well." >&4
- already=true
- ;;
- esac
- esac
- ;;
- esac
- ;;
- esac
- case "$redo" in
- '')
- case "$type" in
- File)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- pf="$ansexp"
- else
- pf="$fp/$ansexp"
- fi
- if test -f "$pf"; then
- type=''
- elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
- then
- echo "($value is not a plain file, but that's ok.)"
- type=''
- fi
- if test X"$type" = X; then
- value="$pf"
- break
- fi
- done
- ;;
- Directory)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- pf="$ansexp"
- else
- pf="$fp/$ansexp"
- fi
- if test -d "$pf"; then
- type=''
- value="$pf"
- break
- fi
- done
- ;;
- Locate)
- if test -d "$ansexp"; then
- echo "(Looking for $loc_file in directory $value.)"
- value="$value/$loc_file"
- ansexp="$ansexp/$loc_file"
- fi
- if test -f "$ansexp"; then
- type=''
- fi
- case "$nopath_ok" in
- true) case "$value" in
- */*) ;;
- *) echo "Assuming $value will be in people's path."
- type=''
- ;;
- esac
- ;;
- esac
- ;;
- esac
-
- case "$skip" in
- true) type='';
- esac
-
- case "$type" in
- '') ;;
- *)
- if test "$fastread" = yes; then
- dflt=y
- else
- dflt=n
- fi
- rp="$what $value doesn't exist. Use that name anyway?"
- . UU/myread
- dflt=''
- case "$ans" in
- y*) type='';;
- *) echo " ";;
- esac
- ;;
- esac
- ;;
- esac
- ;;
- esac
-done
-cd UU
-ans="$value"
-rp="$orig_rp"
-dflt="$orig_dflt"
-rm -f getfile.ok
-test "X$gfpthkeep" != Xy && gfpth=""
-EOSC
-
-: What should the include directory be ?
-echo " "
-$echo $n "Hmm... $c"
-dflt='/usr/include'
-incpath=''
-mips_type=''
-if $test -f /bin/mips && /bin/mips; then
- echo "Looks like a MIPS system..."
- $cat >usr.c <<'EOCP'
-#ifdef SYSTYPE_BSD43
-/bsd43
-#endif
-EOCP
- if $cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
- dflt='/bsd43/usr/include'
- incpath='/bsd43'
- mips_type='BSD 4.3'
- else
- mips_type='System V'
- fi
- $rm -f usr.c usr.out
- echo "and you're compiling with the $mips_type compiler and libraries."
- xxx_prompt=y
- echo "exit 0" >mips
-else
- echo "Doesn't look like a MIPS system."
- xxx_prompt=n
- echo "exit 1" >mips
-fi
-chmod +x mips
-$eunicefix mips
-case "$usrinc" in
-'') ;;
-*) dflt="$usrinc";;
-esac
-case "$xxx_prompt" in
-y) fn=d/
- echo " "
- rp='Where are the include files you want to use?'
- . ./getfile
- usrinc="$ans"
- ;;
-*) usrinc="$dflt"
- ;;
+case "$ccname" in
+'') ccname="$cc" ;;
esac
: see how we invoke the C preprocessor
esac
$rm -f testcpp.c testcpp.out
-: Set private lib path
-case "$plibpth" in
-'') if ./mips; then
- plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
- fi;;
-esac
-case "$libpth" in
-' ') dlist='';;
-'') dlist="$loclibpth $plibpth $glibpth";;
-*) dlist="$libpth";;
+: decide how portable to be. Allow command line overrides.
+case "$d_portable" in
+"$undef") ;;
+*) d_portable="$define" ;;
esac
-: Now check and see which directories actually exist, avoiding duplicates
-libpth=''
-for xxx in $dlist
-do
- if $test -d $xxx; then
- case " $libpth " in
- *" $xxx "*) ;;
- *) libpth="$libpth $xxx";;
- esac
- fi
-done
-$cat <<'EOM'
-
-Some systems have incompatible or broken versions of libraries. Among
-the directories listed in the question below, please remove any you
-know not to be holding relevant libraries, and add any that are needed.
-Say "none" for none.
-
-EOM
-case "$libpth" in
-'') dflt='none';;
-*)
- set X $libpth
- shift
- dflt=${1+"$@"}
+: set up shell script to do ~ expansion
+cat >filexp <<EOSS
+$startsh
+: expand filename
+case "\$1" in
+ ~/*|~)
+ echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
;;
-esac
-rp="Directories to use for library searches?"
-. ./myread
-case "$ans" in
-none) libpth=' ';;
-*) libpth="$ans";;
-esac
-
-: compute shared library extension
-case "$so" in
-'')
- if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
- dflt='sl'
+ ~*)
+ if $test -f /bin/csh; then
+ /bin/csh -f -c "glob \$1"
+ failed=\$?
+ echo ""
+ exit \$failed
else
- dflt='so'
+ name=\`$expr x\$1 : '..\([^/]*\)'\`
+ dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
+ if $test ! -d "\$dir"; then
+ me=\`basename \$0\`
+ echo "\$me: can't locate home directory for: \$name" >&2
+ exit 1
+ fi
+ case "\$1" in
+ */*)
+ echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
+ ;;
+ *)
+ echo \$dir
+ ;;
+ esac
fi
;;
-*) dflt="$so";;
-esac
-$cat <<EOM
-
-On some systems, shared libraries may be available. Answer 'none' if
-you want to suppress searching of shared libraries for the remainder
-of this configuration.
-
-EOM
-rp='What is the file extension used for shared libraries?'
-. ./myread
-so="$ans"
-
-: Define several unixisms.
-: Hints files or command line option can be used to override them.
-: The convoluted testing is in case hints files set either the old
-: or the new name.
-case "$_exe" in
-'') case "$exe_ext" in
- '') ;;
- *) _exe="$exe_ext" ;;
- esac
- ;;
-esac
-case "$_a" in
-'') case "$lib_ext" in
- '') _a='.a';;
- *) _a="$lib_ext" ;;
- esac
+*)
+ echo \$1
;;
esac
-case "$_o" in
-'') case "$obj_ext" in
- '') _o='.o';;
- *) _o="$obj_ext";;
- esac
- ;;
+EOSS
+chmod +x filexp
+$eunicefix filexp
+
+: now set up to get a file name
+cat <<EOS >getfile
+$startsh
+EOS
+cat <<'EOSC' >>getfile
+tilde=''
+fullpath=''
+already=''
+skip=''
+none_ok=''
+exp_file=''
+nopath_ok=''
+orig_rp="$rp"
+orig_dflt="$dflt"
+case "$gfpth" in
+'') gfpth='.' ;;
esac
-case "$p_" in
-'') case "$path_sep" in
- '') p_=':';;
- *) p_="$path_sep";;
- esac
+
+case "$fn" in
+*\(*)
+ expr $fn : '.*(\(.*\)).*' | tr ',' $trnl >getfile.ok
+ fn=`echo $fn | sed 's/(.*)//'`
;;
esac
-exe_ext=$_exe
-lib_ext=$_a
-obj_ext=$_o
-path_sep=$p_
-: Which makefile gets called first. This is used by make depend.
-case "$firstmakefile" in
-'') firstmakefile='makefile';;
+case "$fn" in
+*:*)
+ loc_file=`expr $fn : '.*:\(.*\)'`
+ fn=`expr $fn : '\(.*\):.*'`
+ ;;
esac
-cat <<EOM
-
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks.
-
-Normally you do not need this and you should answer no.
-
-EOM
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-rp='Build Perl for SOCKS?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+case "$fn" in
+*~*) tilde=true;;
esac
-set usesocks
-eval $setvar
-
-: Looking for optional libraries
-echo " "
-echo "Checking for optional libraries..." >&4
-case "$libs" in
-' '|'') dflt='';;
-*) dflt="$libs";;
+case "$fn" in
+*/*) fullpath=true;;
esac
-case "$libswanted" in
-'') libswanted='c_s';;
+case "$fn" in
+*+*) skip=true;;
esac
-case "$usesocks" in
-$define)
- libswanted="$libswanted socks5 socks5_sh"
- ;;
+case "$fn" in
+*n*) none_ok=true;;
esac
-for thislib in $libswanted; do
-
- libname="$thislib"
- if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`
- $test -f "$xxx" -a "X$ignore_versioned_solibs" = "X" ; then
- libstyle=shared
- elif xxx=`./loc lib$thislib.$so X $libpth` ; $test -f "$xxx"; then
- libstyle=shared
- elif xxx=`./loc lib$thislib$_a X $libpth`; $test -f "$xxx"; then
- libstyle=static
- elif xxx=`./loc $thislib$_a X $libpth`; $test -f "$xxx"; then
- libstyle=static
- elif xxx=`./loc lib${thislib}_s$_a X $libpth`; $test -f "$xxx"; then
- libstyle=static
- libname=${thislib}_s
- elif xxx=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$xxx"; then
- libstyle="static"
- fi
- if $test -f "$xxx"; then
- case "$libstyle" in
- shared) echo "Found -l$libname (shared)." ;;
- static) echo "Found -l$libname." ;;
- *) echo "Found -l$libname ($libstyle)." ;;
- esac
- case " $dflt " in
- *"-l$thislib "*);;
- *) dflt="$dflt -l$libname"
- libsfound="$libsfound $xxx"
- yyy=`basename $xxx`
- libsfiles="$libsfiles $yyy"
- yyy=`echo $xxx|sed "s@/$yyy\\$@@"`
- case " $libsdirs " in
- *" $yyy "*) ;;
- *) libsdirs="$libsdirs $yyy" ;;
- esac
- ;;
- esac
- else
- echo "No -l$thislib."
- fi
-done
-set X $dflt
-shift
-dflt="$*"
-case "$libs" in
-'') dflt="$dflt";;
-*) dflt="$libs";;
+case "$fn" in
+*e*) exp_file=true;;
esac
-case "$dflt" in
-' '|'') dflt='none';;
+case "$fn" in
+*p*) nopath_ok=true;;
esac
-$cat <<EOM
-
-In order to compile $package on your machine, a number of libraries
-are usually needed. Include any other special libraries here as well.
-Say "none" for none. The default list is almost always right.
-EOM
-
-echo " "
-rp="What libraries to use?"
-. ./myread
-case "$ans" in
-none) libs=' ';;
-*) libs="$ans";;
+case "$fn" in
+*f*) type='File';;
+*d*) type='Directory';;
+*l*) type='Locate';;
esac
-: determine optimization, if desired, or use for debug flag also
-case "$optimize" in
-' '|$undef) dflt='none';;
-'') dflt='-O';;
-*) dflt="$optimize";;
+what="$type"
+case "$what" in
+Locate) what='File';;
esac
-$cat <<EOH
-By default, $package compiles with the -O flag to use the optimizer.
-Alternately, you might want to use the symbolic debugger, which uses
-the -g flag (on traditional Unix systems). Either flag can be
-specified here. To use neither flag, specify the word "none".
-
-EOH
-rp="What optimizer/debugger flag should be used?"
-. ./myread
-optimize="$ans"
-case "$optimize" in
-'none') optimize=" ";;
+case "$exp_file" in
+'')
+ case "$d_portable" in
+ "$define") ;;
+ *) exp_file=true;;
+ esac
+ ;;
esac
-dflt=''
-: We will not override a previous value, but we might want to
-: augment a hint file
-case "$hint" in
-default|recommended)
- case "$gccversion" in
- 1*) dflt='-fpcc-struct-return' ;;
- esac
- case "$optimize" in
- *-g*) dflt="$dflt -DDEBUGGING";;
- esac
- case "$gccversion" in
- 2*) if test -d /etc/conf/kconfig.d &&
- $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
- then
- dflt="$dflt -posix"
- fi
- ;;
+cd ..
+while test "$type"; do
+ redo=''
+ rp="$orig_rp"
+ dflt="$orig_dflt"
+ case "$tilde" in
+ true) rp="$rp (~name ok)";;
esac
- case "$gccversion" in
- 1*) ;;
- 2.[0-8]*) ;;
- ?*) echo " "
- echo "Checking if your compiler accepts -fno-strict-aliasing" 2>&1
- echo 'int main(void) { return 0; }' > gcctest.c
- if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
- echo "Yes, it does." 2>&1
- case "$ccflags" in
- *strict-aliasing*)
- echo "Leaving current flags $ccflags alone." 2>&1
+ . UU/myread
+ if test -f UU/getfile.ok && \
+ $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
+ then
+ value="$ans"
+ ansexp="$ans"
+ break
+ fi
+ case "$ans" in
+ none)
+ value=''
+ ansexp=''
+ case "$none_ok" in
+ true) type='';;
+ esac
+ ;;
+ *)
+ case "$tilde" in
+ '') value="$ans"
+ ansexp="$ans";;
+ *)
+ value=`UU/filexp $ans`
+ case $? in
+ 0)
+ if test "$ans" != "$value"; then
+ echo "(That expands to $value on this system.)"
+ fi
+ ;;
+ *) value="$ans";;
+ esac
+ ansexp="$value"
+ case "$exp_file" in
+ '') value="$ans";;
+ esac
+ ;;
+ esac
+ case "$fullpath" in
+ true)
+ case "$ansexp" in
+ /*) value="$ansexp" ;;
+ [a-zA-Z]:/*) value="$ansexp" ;;
+ *)
+ redo=true
+ case "$already" in
+ true)
+ echo "I shall only accept a full path name, as in /bin/ls." >&4
+ echo "Use a ! shell escape if you wish to check pathnames." >&4
+ ;;
+ *)
+ echo "Please give a full path name, starting with slash." >&4
+ case "$tilde" in
+ true)
+ echo "Note that using ~name is ok provided it expands well." >&4
+ already=true
+ ;;
+ esac
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ case "$redo" in
+ '')
+ case "$type" in
+ File)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -f "$pf"; then
+ type=''
+ elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
+ then
+ echo "($value is not a plain file, but that's ok.)"
+ type=''
+ fi
+ if test X"$type" = X; then
+ value="$pf"
+ break
+ fi
+ done
+ ;;
+ Directory)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ dir="$ans"
+ direxp="$ansexp"
+ else
+ dir="$fp/$ansexp"
+ direxp="$fp/$ansexp"
+ fi
+ if test -d "$direxp"; then
+ type=''
+ value="$dir"
+ break
+ fi
+ done
+ ;;
+ Locate)
+ if test -d "$ansexp"; then
+ echo "(Looking for $loc_file in directory $value.)"
+ value="$value/$loc_file"
+ ansexp="$ansexp/$loc_file"
+ fi
+ if test -f "$ansexp"; then
+ type=''
+ fi
+ case "$nopath_ok" in
+ true) case "$value" in
+ */*) ;;
+ *) echo "Assuming $value will be in people's path."
+ type=''
+ ;;
+ esac
+ ;;
+ esac
;;
- *) dflt="$dflt -fno-strict-aliasing" ;;
esac
- else
- echo "Nope, it doesn't, but that's ok." 2>&1
- fi
- ;;
- esac
- ;;
-esac
-case "$mips_type" in
-*BSD*|'') inclwanted="$locincpth $usrinc";;
-*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
-esac
-for thisincl in $inclwanted; do
- if $test -d $thisincl; then
- if $test x$thisincl != x$usrinc; then
- case "$dflt" in
- *$thisincl*);;
- *) dflt="$dflt -I$thisincl";;
+ case "$skip" in
+ true) type='';
esac
- fi
- fi
+
+ case "$type" in
+ '') ;;
+ *)
+ if test "$fastread" = yes; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ rp="$what $value doesn't exist. Use that name anyway?"
+ . UU/myread
+ dflt=''
+ case "$ans" in
+ y*) type='';;
+ *) echo " ";;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
done
+cd UU
+ans="$value"
+rp="$orig_rp"
+dflt="$orig_dflt"
+rm -f getfile.ok
+test "X$gfpthkeep" != Xy && gfpth=""
+EOSC
-inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
- xxx=true;
-elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
- xxx=true;
+: What should the include directory be ?
+echo " "
+$echo $n "Hmm... $c"
+dflt='/usr/include'
+incpath=''
+mips_type=''
+if $test -f /bin/mips && /bin/mips; then
+ echo "Looks like a MIPS system..."
+ $cat >usr.c <<'EOCP'
+#ifdef SYSTYPE_BSD43
+/bsd43
+#endif
+EOCP
+ if cc -E usr.c > usr.out && $contains / usr.out >/dev/null 2>&1; then
+ dflt='/bsd43/usr/include'
+ incpath='/bsd43'
+ mips_type='BSD 4.3'
+ else
+ mips_type='System V'
+ fi
+ $rm -f usr.c usr.out
+ echo "and you're compiling with the $mips_type compiler and libraries."
+ xxx_prompt=y
+ echo "exit 0" >mips
else
- xxx=false;
-fi;
-if $xxx; then
- case "$dflt" in
- *$2*);;
- *) dflt="$dflt -D$2";;
- esac;
-fi'
-
-set signal.h LANGUAGE_C; eval $inctest
-
-case "$usesocks" in
-$define)
- ccflags="$ccflags -DSOCKS"
+ echo "Doesn't look like a MIPS system."
+ xxx_prompt=n
+ echo "exit 1" >mips
+fi
+chmod +x mips
+$eunicefix mips
+case "$usrinc" in
+'') ;;
+*) dflt="$usrinc";;
+esac
+case "$xxx_prompt" in
+y) fn=d/
+ echo " "
+ rp='Where are the include files you want to use?'
+ . ./getfile
+ usrinc="$ans"
+ ;;
+*) usrinc="$dflt"
;;
esac
-case "$hint" in
-default|recommended) dflt="$ccflags $dflt" ;;
-*) dflt="$ccflags";;
+: Set private lib path
+case "$plibpth" in
+'') if ./mips; then
+ plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib"
+ fi;;
esac
-
-case "$dflt" in
-''|' ') dflt=none;;
+case "$libpth" in
+' ') dlist='';;
+'') dlist="$loclibpth $plibpth $glibpth";;
+*) dlist="$libpth";;
esac
-$cat <<EOH
-
-Your C compiler may want other flags. For this question you should include
--I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
-but you should NOT include libraries or ld flags like -lwhatever. If you
-want $package to honor its debug switch, you should include -DDEBUGGING here.
-Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.
-
-To use no flags, specify the word "none".
-EOH
-set X $dflt
-shift
-dflt=${1+"$@"}
-rp="Any additional cc flags?"
-. ./myread
-case "$ans" in
-none) ccflags='';;
-*) ccflags="$ans";;
-esac
+: Now check and see which directories actually exist, avoiding duplicates
+libpth=''
+for xxx in $dlist
+do
+ if $test -d $xxx; then
+ case " $libpth " in
+ *" $xxx "*) ;;
+ *) libpth="$libpth $xxx";;
+ esac
+ fi
+done
+$cat <<'EOM'
-: the following weeds options from ccflags that are of no interest to cpp
-cppflags="$ccflags"
-case "$gccversion" in
-1*) cppflags="$cppflags -D__GNUC__"
-esac
-case "$mips_type" in
-'');;
-*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
-esac
-case "$cppflags" in
-'');;
-*)
- echo " "
- echo "Let me guess what the preprocessor flags are..." >&4
- set X $cppflags
- shift
- cppflags=''
- $cat >cpp.c <<'EOM'
-#define BLURFL foo
+Some systems have incompatible or broken versions of libraries. Among
+the directories listed in the question below, please remove any you
+know not to be holding relevant libraries, and add any that are needed.
+Say "none" for none.
-BLURFL xx LFRULB
EOM
- previous=''
- for flag in $*
- do
- case "$flag" in
- -*) ftry="$flag";;
- *) ftry="$previous $flag";;
- esac
- if $cppstdin -DLFRULB=bar $cppflags $ftry $cppminus <cpp.c \
- >cpp1.out 2>/dev/null && \
- $cpprun -DLFRULB=bar $cppflags $ftry $cpplast <cpp.c \
- >cpp2.out 2>/dev/null && \
- $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
- $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
- then
- cppflags="$cppflags $ftry"
- previous=''
- else
- previous="$flag"
- fi
- done
- set X $cppflags
+case "$libpth" in
+'') dflt='none';;
+*)
+ set X $libpth
shift
- cppflags=${1+"$@"}
- case "$cppflags" in
- *-*) echo "They appear to be: $cppflags";;
- esac
- $rm -f cpp.c cpp?.out
+ dflt=${1+"$@"}
;;
esac
+rp="Directories to use for library searches?"
+. ./myread
+case "$ans" in
+none) libpth=' ';;
+*) libpth="$ans";;
+esac
-: flags used in final linking phase
-case "$ldflags" in
-'') if ./venix; then
- dflt='-i -z'
+: compute shared library extension
+case "$so" in
+'')
+ if xxx=`./loc libc.sl X $libpth`; $test -f "$xxx"; then
+ dflt='sl'
else
- dflt=''
+ dflt='so'
fi
- case "$ccflags" in
- *-posix*) dflt="$dflt -posix" ;;
- esac
;;
-*) dflt="$ldflags";;
+*) dflt="$so";;
esac
+$cat <<EOM
-: Try to guess additional flags to pick up local libraries.
-for thislibdir in $libpth; do
- case " $loclibpth " in
- *" $thislibdir "*)
- case "$dflt " in
- *"-L$thislibdir "*) ;;
- *) dflt="$dflt -L$thislibdir" ;;
- esac
- ;;
- esac
-done
+On some systems, shared libraries may be available. Answer 'none' if
+you want to suppress searching of shared libraries for the remainder
+of this configuration.
-case "$dflt" in
-'') dflt='none' ;;
-esac
+EOM
+rp='What is the file extension used for shared libraries?'
+. ./myread
+so="$ans"
-$cat <<EOH
+: Define several unixisms.
+: Hints files or command line option can be used to override them.
+: The convoluted testing is in case hints files set either the old
+: or the new name.
+case "$_exe" in
+'') case "$exe_ext" in
+ '') ;;
+ *) _exe="$exe_ext" ;;
+ esac
+ ;;
+esac
+case "$_a" in
+'') case "$lib_ext" in
+ '') _a='.a';;
+ *) _a="$lib_ext" ;;
+ esac
+ ;;
+esac
+case "$_o" in
+'') case "$obj_ext" in
+ '') _o='.o';;
+ *) _o="$obj_ext";;
+ esac
+ ;;
+esac
+case "$p_" in
+'') case "$path_sep" in
+ '') p_=':';;
+ *) p_="$path_sep";;
+ esac
+ ;;
+esac
+exe_ext=$_exe
+lib_ext=$_a
+obj_ext=$_o
+path_sep=$p_
-Your C linker may need flags. For this question you should
-include -L/whatever and any other flags used by the C linker, but you
-should NOT include libraries like -lwhatever.
+: Which makefile gets called first. This is used by make depend.
+case "$firstmakefile" in
+'') firstmakefile='makefile';;
+esac
-Make sure you include the appropriate -L/path flags if your C linker
-does not normally search all of the directories you specified above,
-namely
- $libpth
-To use no flags, specify the word "none".
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
-EOH
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks.
-rp="Any additional ld flags (NOT including libraries)?"
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl for SOCKS?'
. ./myread
case "$ans" in
-none) ldflags='';;
-*) ldflags="$ans";;
+y|Y) val="$define" ;;
+*) val="$undef" ;;
esac
-rmlist="$rmlist pdp11"
+set usesocks
+eval $setvar
-: coherency check
+: Looking for optional libraries
echo " "
-echo "Checking your choice of C compiler and flags for coherency..." >&4
-$cat > try.c <<'EOF'
-#include <stdio.h>
-int main() { printf("Ok\n"); exit(0); }
-EOF
-set X $cc $optimize $ccflags -o try $ldflags try.c $libs
+echo "Checking for optional libraries..." >&4
+case "$libs" in
+' '|'') dflt='';;
+*) dflt="$libs";;
+esac
+case "$libswanted" in
+'') libswanted='c_s';;
+esac
+case "$usesocks" in
+"$define") libswanted="$libswanted socks5 socks5_sh" ;;
+esac
+libsfound=''
+libsfiles=''
+libsdirs=''
+libspath=''
+for thisdir in $libpth $xlibpth; do
+ test -d $thisdir && libspath="$libspath $thisdir"
+done
+for thislib in $libswanted; do
+ for thisdir in $libspath; do
+ xxx=''
+ if $test ! -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
+ xxx=`ls $thisdir/lib$thislib.$so.[0-9] 2>/dev/null|tail -1`
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=shared
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib$thislib.$so
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=shared
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/lib${thislib}_s$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ $test -f "$xxx" && thislib=${thislib}_s
+ fi
+ if test ! -f "$xxx"; then
+ xxx=$thisdir/Slib$thislib$_a
+ $test -f "$xxx" && eval $libscheck
+ $test -f "$xxx" && libstyle=static
+ fi
+ if $test -f "$xxx"; then
+ case "$libstyle" in
+ shared) echo "Found -l$thislib (shared)." ;;
+ static) echo "Found -l$thislib." ;;
+ *) echo "Found -l$thislib ($libstyle)." ;;
+ esac
+ case " $dflt " in
+ *"-l$thislib "*);;
+ *) dflt="$dflt -l$thislib"
+ libsfound="$libsfound $xxx"
+ yyy=`basename $xxx`
+ libsfiles="$libsfiles $yyy"
+ yyy=`echo $xxx|$sed -e "s%/$yyy\\$%%"`
+ case " $libsdirs " in
+ *" $yyy "*) ;;
+ *) libsdirs="$libsdirs $yyy" ;;
+ esac
+ ;;
+ esac
+ break
+ fi
+ done
+ if $test ! -f "$xxx"; then
+ echo "No -l$thislib."
+ fi
+done
+set X $dflt
shift
-$cat >try.msg <<'EOM'
-I've tried to compile and run the following simple program:
+dflt="$*"
+case "$libs" in
+'') dflt="$dflt";;
+*) dflt="$libs";;
+esac
+case "$dflt" in
+' '|'') dflt='none';;
+esac
-EOM
-$cat try.c >> try.msg
+$cat <<EOM
-$cat >> try.msg <<EOM
+In order to compile $package on your machine, a number of libraries
+are usually needed. Include any other special libraries here as well.
+Say "none" for none. The default list is almost always right.
+EOM
-I used the command:
+echo " "
+rp="What libraries to use?"
+. ./myread
+case "$ans" in
+none) libs=' ';;
+*) libs="$ans";;
+esac
- $*
- ./try
+: determine optimization, if desired, or use for debug flag also
+case "$optimize" in
+' '|$undef) dflt='none';;
+'') dflt='-O';;
+*) dflt="$optimize";;
+esac
+$cat <<EOH
+
+By default, $package compiles with the -O flag to use the optimizer.
+Alternately, you might want to use the symbolic debugger, which uses
+the -g flag (on traditional Unix systems). Either flag can be
+specified here. To use neither flag, specify the word "none".
+
+EOH
+rp="What optimizer/debugger flag should be used?"
+. ./myread
+optimize="$ans"
+case "$optimize" in
+'none') optimize=" ";;
+esac
+
+dflt=''
+: We will not override a previous value, but we might want to
+: augment a hint file
+case "$hint" in
+default|recommended)
+ case "$gccversion" in
+ 1*) dflt='-fpcc-struct-return' ;;
+ esac
+ case "$optimize" in
+ *-g*) dflt="$dflt -DDEBUGGING";;
+ esac
+ case "$gccversion" in
+ 2*) if test -d /etc/conf/kconfig.d &&
+ $contains _POSIX_VERSION $usrinc/sys/unistd.h >/dev/null 2>&1
+ then
+ dflt="$dflt -posix"
+ fi
+ ;;
+ esac
+ case "$gccversion" in
+ 1*) ;;
+ 2.[0-8]*) ;;
+ ?*) echo " "
+ echo "Checking if your compiler accepts -fno-strict-aliasing" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -O2 -fno-strict-aliasing -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *strict-aliasing*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -fno-strict-aliasing" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+ ;;
+ esac
+ ;;
+esac
+
+case "$mips_type" in
+*BSD*|'') inclwanted="$locincpth $usrinc";;
+*) inclwanted="$locincpth $inclwanted $usrinc/bsd";;
+esac
+for thisincl in $inclwanted; do
+ if $test -d $thisincl; then
+ if $test x$thisincl != x$usrinc; then
+ case "$dflt" in
+ *" -I$thisincl "*);;
+ *) dflt="$dflt -I$thisincl ";;
+ esac
+ fi
+ fi
+done
+
+inctest='if $contains $2 $usrinc/$1 >/dev/null 2>&1; then
+ xxx=true;
+elif $contains $2 $usrinc/sys/$1 >/dev/null 2>&1; then
+ xxx=true;
+else
+ xxx=false;
+fi;
+if $xxx; then
+ case "$dflt" in
+ *$2*);;
+ *) dflt="$dflt -D$2";;
+ esac;
+fi'
+
+set signal.h LANGUAGE_C; eval $inctest
+
+case "$usesocks" in
+$define)
+ ccflags="$ccflags -DSOCKS"
+ ;;
+esac
+
+case "$hint" in
+default|recommended) dflt="$ccflags $dflt" ;;
+*) dflt="$ccflags";;
+esac
+
+case "$dflt" in
+''|' ') dflt=none;;
+esac
+
+$cat <<EOH
+
+Your C compiler may want other flags. For this question you should include
+-I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
+but you should NOT include libraries or ld flags like -lwhatever. If you
+want $package to honor its debug switch, you should include -DDEBUGGING here.
+Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.
+
+To use no flags, specify the word "none".
+
+EOH
+set X $dflt
+shift
+dflt=${1+"$@"}
+rp="Any additional cc flags?"
+. ./myread
+case "$ans" in
+none) ccflags='';;
+*) ccflags="$ans";;
+esac
+
+: the following weeds options from ccflags that are of no interest to cpp
+cppflags="$ccflags"
+case "$gccversion" in
+1*) cppflags="$cppflags -D__GNUC__"
+esac
+case "$mips_type" in
+'');;
+*BSD*) cppflags="$cppflags -DSYSTYPE_BSD43";;
+esac
+case "$cppflags" in
+'');;
+*)
+ echo " "
+ echo "Let me guess what the preprocessor flags are..." >&4
+ set X $cppflags
+ shift
+ cppflags=''
+ $cat >cpp.c <<'EOM'
+#define BLURFL foo
+
+BLURFL xx LFRULB
+EOM
+ previous=''
+ for flag in $*
+ do
+ case "$flag" in
+ -*) ftry="$flag";;
+ *) ftry="$previous $flag";;
+ esac
+ if $cppstdin -DLFRULB=bar $cppflags $ftry $cppminus <cpp.c \
+ >cpp1.out 2>/dev/null && \
+ $cpprun -DLFRULB=bar $cppflags $ftry $cpplast <cpp.c \
+ >cpp2.out 2>/dev/null && \
+ $contains 'foo.*xx.*bar' cpp1.out >/dev/null 2>&1 && \
+ $contains 'foo.*xx.*bar' cpp2.out >/dev/null 2>&1
+ then
+ cppflags="$cppflags $ftry"
+ previous=''
+ else
+ previous="$flag"
+ fi
+ done
+ set X $cppflags
+ shift
+ cppflags=${1+"$@"}
+ case "$cppflags" in
+ *-*) echo "They appear to be: $cppflags";;
+ esac
+ $rm -f cpp.c cpp?.out
+ ;;
+esac
+
+: flags used in final linking phase
+case "$ldflags" in
+'') if ./venix; then
+ dflt='-i -z'
+ else
+ dflt=''
+ fi
+ case "$ccflags" in
+ *-posix*) dflt="$dflt -posix" ;;
+ esac
+ ;;
+*) dflt="$ldflags";;
+esac
+
+: Try to guess additional flags to pick up local libraries.
+for thislibdir in $libpth; do
+ case " $loclibpth " in
+ *" $thislibdir "*)
+ case "$dflt " in
+ *"-L$thislibdir "*) ;;
+ *) dflt="$dflt -L$thislibdir" ;;
+ esac
+ ;;
+ esac
+done
+
+case "$dflt" in
+'') dflt='none' ;;
+esac
+
+$cat <<EOH
+
+Your C linker may need flags. For this question you should
+include -L/whatever and any other flags used by the C linker, but you
+should NOT include libraries like -lwhatever.
+
+Make sure you include the appropriate -L/path flags if your C linker
+does not normally search all of the directories you specified above,
+namely
+ $libpth
+To use no flags, specify the word "none".
+
+EOH
+
+rp="Any additional ld flags (NOT including libraries)?"
+. ./myread
+case "$ans" in
+none) ldflags='';;
+*) ldflags="$ans";;
+esac
+rmlist="$rmlist pdp11"
+
+: coherency check
+echo " "
+echo "Checking your choice of C compiler and flags for coherency..." >&4
+$cat > try.c <<'EOF'
+#include <stdio.h>
+int main() { printf("Ok\n"); exit(0); }
+EOF
+set X $cc -o try $optimize $ccflags $ldflags try.c $libs
+shift
+$cat >try.msg <<'EOM'
+I've tried to compile and run the following simple program:
+
+EOM
+$cat try.c >> try.msg
+
+$cat >> try.msg <<EOM
+
+I used the command:
+
+ $*
+ ./try
and I got the following output:
EOM
dflt=y
-if sh -c "$cc $optimize $ccflags -o try $ldflags try.c $libs" >>try.msg 2>&1; then
+if sh -c "$cc -o try $optimize $ccflags $ldflags try.c $libs" >>try.msg 2>&1; then
if sh -c './try' >>try.msg 2>&1; then
xxx=`./try`
case "$xxx" in
compile='
mc_file=$1;
shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs > /dev/null 2>&1;'
+$cc -o ${mc_file} $optimize $ccflags $ldflags $* ${mc_file}.c $libs > /dev/null 2>&1;'
: define a shorthand compile call for compilations that should be ok.
compile_ok='
mc_file=$1;
shift;
-$cc $optimize $ccflags $ldflags -o ${mc_file} $* ${mc_file}.c $libs;'
+$cc -o ${mc_file} $optimize $ccflags $ldflags $* ${mc_file}.c $libs;'
: check for lengths of integral types
echo " "
eval $typedef_ask
echo " "
-$echo $n "Checking to see how big your file offsets are...$c" >&4
+echo "Checking to see how big your file offsets are..." >&4
$cat >try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
set try
if eval $compile_ok; then
lseeksize=`./try`
- $echo " $lseeksize bytes." >&4
+ echo "Your file offsets are $lseeksize bytes long."
else
dflt=$longsize
echo " "
*_t) zzz="$fpostype" ;;
*) zzz="fpos_t" ;;
esac
-$echo $n "Checking the size of $zzz...$c" >&4
+echo "Checking the size of $zzz..." >&4
cat > try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
yyy=`./try`
case "$yyy" in
'') fpossize=4
- echo " "
echo "(I can't execute the test program--guessing $fpossize.)" >&4
;;
*) fpossize=$yyy
- echo " $fpossize bytes."
+ echo "Your $zzz is $fpossize bytes long."
;;
esac
else
dflt="$longsize"
- echo " "
+ echo " " >&4
echo "(I can't compile the test program. Guessing...)" >&4
rp="What is the size of your file positions (in bytes)?"
. ./myread
-case "$lseeksize:$fpossize" in
-8:8) cat <<EOM
+# Backward compatibility (uselfs is deprecated).
+case "$uselfs" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
-You can have files larger than 2 gigabytes.
+*** Configure -Duselfs is deprecated, using -Duselargefiles instead.
EOM
- val="$define" ;;
-*) cat <<EOM
+ uselargefiles="$define"
+ ;;
+esac
-Perl can be built to understand large files (files larger than 2 gigabytes)
-on some systems. To do so, Configure must be run with -Duselargefiles.
+case "$lseeksize:$fpossize" in
+8:8) cat <<EOM
-If this doesn't make any sense to you, just accept the default 'y'.
+You can have files larger than 2 gigabytes.
EOM
- case "$uselargefiles" in
+ val="$define" ;;
+*) case "$uselargefiles" in
"$undef"|false|[nN]*) dflt='n' ;;
*) dflt='y' ;;
esac
+ cat <<EOM
+
+Perl can be built to understand large files (files larger than 2 gigabytes)
+on some systems. To do so, Configure can be run with -Duselargefiles.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
rp='Try to understand large files, if available?'
. ./myread
case "$ans" in
: Look for a hint-file generated 'call-back-unit'. If the
: user has specified that a large files perl is to be built,
: we may need to set or change some other defaults.
- if $test -f uselfs.cbu; then
+ if $test -f uselargefiles.cbu; then
echo "Your platform has some specific hints for large file builds, using them..."
- . ./uselfs.cbu
+ . ./uselargefiles.cbu
echo " "
- $echo $n "Rechecking to see how big your file offsets are...$c" >&4
+ echo "Rechecking to see how big your file offsets are..." >&4
$cat >try.c <<EOCP
#include <sys/types.h>
#include <stdio.h>
set try
if eval $compile_ok; then
lseeksize=`./try`
- $echo " $lseeksize bytes." >&4
+ $echo "Your file offsets are now $lseeksize bytes long."
else
dflt="$lseeksize"
echo " "
echo "(I can't execute the test program--guessing $fpossize.)" >&4
;;
*) fpossize=$yyy
- echo " $fpossize bytes."
+ echo " $fpossize bytes." >&4
;;
esac
else
- dflt="$fpossize"
- echo " "
- echo "(I can't compile the test program. Guessing...)" >&4
- rp="What is the size of your file positions (in bytes)?"
- . ./myread
- fpossize="$ans"
+ dflt="$fpossize"
+ echo " "
+ echo "(I can't compile the test program. Guessing...)" >&4
+ rp="What is the size of your file positions (in bytes)?"
+ . ./myread
+ fpossize="$ans"
+ fi
+ $rm -f try.c try
+ fi
+ ;;
+esac
+
+
+case "$usemorebits" in
+"$define"|true|[yY]*)
+ use64bitint="$define"
+ uselongdouble="$define"
+ usemorebits="$define"
+ ;;
+*) usemorebits="$undef"
+ ;;
+esac
+
+
+case "$uselonglong" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duselonglong is deprecated, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bits" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** Configure -Duse64bits is deprecated, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bitints" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitints, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bitsint" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitsint, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$uselonglongs" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duselonglongs, using -Duse64bitint instead.
+EOM
+ use64bitint="$define"
+ ;;
+esac
+case "$use64bitsall" in
+"$define"|true|[yY]*)
+ cat <<EOM >&4
+
+*** There is no Configure -Duse64bitsall, using -Duse64bitall instead.
+EOM
+ use64bitall="$define"
+ ;;
+esac
+
+case "$ccflags" in
+*-DUSE_LONG_LONG*|*-DUSE_64_BIT_INT*|*-DUSE_64_BIT_ALL*) use64bitint="$define";;
+esac
+case "$use64bitall" in
+"$define"|true|[yY]*) use64bitint="$define" ;;
+esac
+
+case "$longsize" in
+8) cat <<EOM
+
+You have natively 64-bit long integers.
+EOM
+ val="$define"
+ ;;
+*) case "$use64bitint" in
+ "$define"|true|[yY]*) dflt='y';;
+ *) dflt='n';;
+ esac
+ cat <<EOM
+
+Perl can be built to take advantage of 64-bit integer types
+on some systems. To do so, Configure can be run with -Duse64bitint.
+Choosing this option will most probably introduce binary incompatibilities.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+ rp='Try to use 64-bit integers, if available?'
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
+esac
+set use64bitint
+eval $setvar
+
+case "$use64bitall" in
+"$define"|true|[yY]*) dflt='y' ;;
+*) case "$longsize" in
+ 8) dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+esac
+cat <<EOM
+
+You may also choose to try maximal 64-bitness. It means using as much
+64-bitness as possible on the platform. This in turn means even more
+binary incompatibilities. On the other hand, your platform may not
+have any more 64-bitness available than what you already have chosen.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Try to use maximal 64-bit support, if available?'
+. ./myread
+case "$ans" in
+[yY]*) val="$define" ;;
+*) val="$undef" ;;
+esac
+set use64bitall
+eval $setvar
+case "$use64bitall" in
+"$define")
+ case "$use64bitint" in
+ "$undef")
+ cat <<EOM
+
+Since you have chosen a maximally 64-bit build, I'm also turning on
+the use of 64-bit integers.
+EOM
+ use64bitint="$define" ;;
+ esac
+ ;;
+esac
+
+case "$use64bitint" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bitint.cbu; then
+ echo "Your platform has some specific hints for 64-bit integers, using them..."
+ . ./use64bitint.cbu
+ fi
+ case "$longsize" in
+ 4) case "$archname64" in
+ '') archname64=64int ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+case "$use64bitall" in
+"$define"|true|[yY]*)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a maximally 64-bit perl is to be built,
+: we may need to set or change some other defaults.
+ if $test -f use64bitall.cbu; then
+ echo "Your platform has some specific hints for 64-bit builds, using them..."
+ . ./use64bitall.cbu
+ fi
+ case "$longsize" in
+ 4) case "$archname64" in
+ ''|64int) archname64=64all ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+echo " "
+echo "Checking for GNU C Library..." >&4
+cat >gnulibc.c <<EOM
+#include <stdio.h>
+int main()
+{
+#ifdef __GLIBC__
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOM
+set gnulibc
+if eval $compile_ok && ./gnulibc; then
+ val="$define"
+ echo "You are using the GNU C Library"
+else
+ val="$undef"
+ echo "You are not using the GNU C Library"
+fi
+$rm -f gnulibc*
+set d_gnulibc
+eval $setvar
+
+: see if nm is to be used to determine whether a symbol is defined or not
+case "$usenm" in
+'')
+ dflt=''
+ case "$d_gnulibc" in
+ "$define")
+ echo " "
+ echo "nm probably won't work on the GNU C Library." >&4
+ dflt=n
+ ;;
+ esac
+ case "$dflt" in
+ '')
+ if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
+ echo " "
+ echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
+ echo "'nm' won't be sufficient on this sytem." >&4
+ dflt=n
+ fi
+ ;;
+ esac
+ case "$dflt" in
+ '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
+ if $test $dflt -gt 20; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ ;;
+ esac
+ ;;
+*)
+ case "$usenm" in
+ true|$define) dflt=y;;
+ *) dflt=n;;
+ esac
+ ;;
+esac
+$cat <<EOM
+
+I can use $nm to extract the symbols from your C libraries. This
+is a time consuming task which may generate huge output on the disk (up
+to 3 megabytes) but that should make the symbols extraction faster. The
+alternative is to skip the 'nm' extraction part and to compile a small
+test program instead to determine whether each symbol is present. If
+you have a fast C compiler and/or if your 'nm' output cannot be parsed,
+this may be the best solution.
+
+You probably shouldn't let me use 'nm' if you are using the GNU C Library.
+
+EOM
+rp="Shall I use $nm to extract C symbols from the libraries?"
+. ./myread
+case "$ans" in
+[Nn]*) usenm=false;;
+*) usenm=true;;
+esac
+
+runnm=$usenm
+case "$reuseval" in
+true) runnm=false;;
+esac
+
+: nm options which may be necessary
+case "$nm_opt" in
+'') if $test -f /mach_boot; then
+ nm_opt='' # Mach
+ elif $test -d /usr/ccs/lib; then
+ nm_opt='-p' # Solaris (and SunOS?)
+ elif $test -f /dgux; then
+ nm_opt='-p' # DG-UX
+ elif $test -f /lib64/rld; then
+ nm_opt='-p' # 64-bit Irix
+ else
+ nm_opt=''
+ fi;;
+esac
+
+: nm options which may be necessary for shared libraries but illegal
+: for archive libraries. Thank you, Linux.
+case "$nm_so_opt" in
+'') case "$myuname" in
+ *linux*)
+ if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
+ nm_so_opt='--dynamic'
+ fi
+ ;;
+ esac
+ ;;
+esac
+
+case "$runnm" in
+true)
+: get list of predefined functions in a handy place
+echo " "
+case "$libc" in
+'') libc=unknown
+ case "$libs" in
+ *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
+ esac
+ ;;
+esac
+libnames='';
+case "$libs" in
+'') ;;
+*) for thislib in $libs; do
+ case "$thislib" in
+ -lc|-lc_s)
+ : Handle C library specially below.
+ ;;
+ -l*)
+ thislib=`echo $thislib | $sed -e 's/^-l//'`
+ if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
+ :
+ elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
+ :
+ else
+ try=''
+ fi
+ libnames="$libnames $try"
+ ;;
+ *) libnames="$libnames $thislib" ;;
+ esac
+ done
+ ;;
+esac
+xxx=normal
+case "$libc" in
+unknown)
+ set /lib/libc.$so
+ for xxx in $libpth; do
+ $test -r $1 || set $xxx/libc.$so
+ : The messy sed command sorts on library version numbers.
+ $test -r $1 || \
+ set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
+ tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ h
+ s/[0-9][0-9]*/0000&/g
+ s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
+ G
+ s/\n/ /' | \
+ sort | $sed -e 's/^.* //'`
+ eval set \$$#
+ done
+ $test -r $1 || set /usr/ccs/lib/libc.$so
+ $test -r $1 || set /lib/libsys_s$_a
+ ;;
+*)
+ set blurfl
+ ;;
+esac
+if $test -r "$1"; then
+ echo "Your (shared) C library seems to be in $1."
+ libc="$1"
+elif $test -r /lib/libc && $test -r /lib/clib; then
+ echo "Your C library seems to be in both /lib/clib and /lib/libc."
+ xxx=apollo
+ libc='/lib/clib /lib/libc'
+ if $test -r /lib/syslib; then
+ echo "(Your math library is in /lib/syslib.)"
+ libc="$libc /lib/syslib"
+ fi
+elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ echo "Your C library seems to be in $libc, as you said before."
+elif $test -r $incpath/usr/lib/libc$_a; then
+ libc=$incpath/usr/lib/libc$_a;
+ echo "Your C library seems to be in $libc. That's fine."
+elif $test -r /lib/libc$_a; then
+ libc=/lib/libc$_a;
+ echo "Your C library seems to be in $libc. You're normal."
+else
+ if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
+ libnames="$libnames "`./loc clib blurfl/dyick $libpth`
+ elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
+ :
+ else
+ tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
+ fi
+ if $test -r "$tans"; then
+ echo "Your C library seems to be in $tans, of all places."
+ libc=$tans
+ else
+ libc='blurfl'
+ fi
+fi
+if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
+ dflt="$libc"
+ cat <<EOM
+
+If the guess above is wrong (which it might be if you're using a strange
+compiler, or your machine supports multiple models), you can override it here.
+
+EOM
+else
+ dflt=''
+ echo $libpth | tr ' ' $trnl | sort | uniq > libpath
+ cat >&4 <<EOM
+I can't seem to find your C library. I've looked in the following places:
+
+EOM
+ $sed 's/^/ /' libpath
+ cat <<EOM
+
+None of these seems to contain your C library. I need to get its name...
+
+EOM
+fi
+fn=f
+rp='Where is your C library?'
+. ./getfile
+libc="$ans"
+
+echo " "
+echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
+set X `cat libnames`
+shift
+xxx=files
+case $# in 1) xxx=file; esac
+echo "Extracting names from the following $xxx for later perusal:" >&4
+echo " "
+$sed 's/^/ /' libnames >&4
+echo " "
+$echo $n "This may take a while...$c" >&4
+
+for file in $*; do
+ case $file in
+ *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
+ *) $nm $nm_opt $file 2>/dev/null;;
+ esac
+done >libc.tmp
+
+$echo $n ".$c"
+$grep fprintf libc.tmp > libc.ptf
+xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
+xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
+xxx='[ADTSIW]'
+if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
+ -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
+ eval $xscan;\
+ $contains '^fprintf$' libc.list >/dev/null 2>&1; then
+ eval $xrun
+else
+ $nm -p $* 2>/dev/null >libc.tmp
+ $grep fprintf libc.tmp > libc.ptf
+ if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
+ eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
+ then
+ nm_opt='-p'
+ eval $xrun
+ else
+ echo " "
+ echo "$nm didn't seem to work right. Trying $ar instead..." >&4
+ com=''
+ if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
+ for thisname in $libnames $libc; do
+ $ar t $thisname >>libc.tmp
+ done
+ $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
+ echo "Ok." >&4
+ elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
+ # Repeat libc to extract forwarders to DLL entries too
+ for thisname in $libnames $libc; do
+ $ar tv $thisname >>libc.tmp
+ # Revision 50 of EMX has bug in $ar.
+ # it will not extract forwarders to DLL entries
+ # Use emximp which will extract exactly them.
+ emximp -o tmp.imp $thisname \
+ 2>/dev/null && \
+ $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
+ < tmp.imp >>libc.tmp
+ $rm tmp.imp
+ done
+ $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
+ echo "Ok." >&4
+ else
+ echo "$ar didn't seem to work right." >&4
+ echo "Maybe this is a Cray...trying bld instead..." >&4
+ if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
+ then
+ for thisname in $libnames; do
+ bld t $libnames | \
+ $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
+ $ar t $thisname >>libc.tmp
+ done
+ echo "Ok." >&4
+ else
+ echo "That didn't work either. Giving up." >&4
+ exit 1
+ fi
fi
- $rm -f try.c try
fi
- ;;
+fi
+nm_extract="$com"
+if $test -f /lib/syscalls.exp; then
+ echo " "
+ echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
+ $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
+fi
+;;
esac
+$rm -f libnames libpath
+: is a C symbol defined?
+csym='tlook=$1;
+case "$3" in
+-v) tf=libc.tmp; tc=""; tdc="";;
+-a) tf=libc.tmp; tc="[0]"; tdc="[]";;
+*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
+esac;
+tx=yes;
+case "$reuseval-$4" in
+true-) ;;
+true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
+esac;
+case "$tx" in
+yes)
+ case "$runnm" in
+ true)
+ if $contains $tlook $tf >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;;
+ *)
+ echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
+ if $cc -o t $optimize $ccflags $ldflags t.c $libs >/dev/null 2>&1;
+ then tval=true;
+ else tval=false;
+ fi;
+ $rm -f t t.c;;
+ esac;;
+*)
+ case "$tval" in
+ $define) tval=true;;
+ *) tval=false;;
+ esac;;
+esac;
+eval "$2=$tval"'
-case "$usemorebits" in
-"$define"|true|[yY]*)
- use64bits="$define"
- uselongdouble="$define"
- usemorebits="$define"
- ;;
-*) usemorebits="$undef"
- ;;
-esac
+: define an is-in-libc? function
+inlibc='echo " "; td=$define; tu=$undef;
+sym=$1; var=$2; eval "was=\$$2";
+tx=yes;
+case "$reuseval$was" in
+true) ;;
+true*) tx=no;;
+esac;
+case "$tx" in
+yes)
+ set $sym tres -f;
+ eval $csym;
+ case "$tres" in
+ true)
+ echo "$sym() found." >&4;
+ case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
+ *)
+ echo "$sym() NOT found." >&4;
+ case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
+ esac;;
+*)
+ case "$was" in
+ $define) echo "$sym() found." >&4;;
+ *) echo "$sym() NOT found." >&4;;
+ esac;;
+esac'
+: see if sqrtl exists
+set sqrtl d_sqrtl
+eval $inlibc
-case "$intsize:$longsize" in
-8:*|*:8) cat <<EOM
+case "$ccflags" in
+*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
+esac
-You have natively 64-bit integers.
-EOM
- val="$define"
- ;;
-*) case "$ccflags" in
- *-DUSE_64_BITS*|*-DUSE_LONG_LONG*) use64bits="$define";;
- *) case "$uselonglong" in
- $define|true|[yY]*) use64bits="$define";;
- esac
- ;;
- esac
- case "$use64bits" in
- $define|true|[yY]*) dflt='y';;
- *) dflt='n';;
- esac
+case "$uselongdouble" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
cat <<EOM
-Perl can be built to take advantage of 64-bit integer types
-on some systems. To do so, Configure must be run with -Duse64bits.
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
- rp='Try to use 64-bit integers, if available?'
- . ./myread
- case "$ans" in
- [yY]*) val="$define" ;;
- *) val="$undef" ;;
- esac
- ;;
+rp='Try to use long doubles if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
esac
-set use64bits
+set uselongdouble
eval $setvar
-case "$archname64" in
-'') archname64='' ;; # not a typo
+case "$uselongdouble" in
+true|[yY]*) uselongdouble="$define" ;;
esac
-case "$use64bits" in
-"$define"|true|[yY]*)
+case "$uselongdouble" in
+$define)
: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a 64-bit perl is to be built,
+: user has specified that long doubles should be used,
: we may need to set or change some other defaults.
- if $test -f use64bits.cbu; then
- echo "Your platform has some specific hints for 64-bit builds, using them..."
- . ./use64bits.cbu
+ if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints for long doubles, using them..."
+ . ./uselongdouble.cbu
else
$cat <<EOM
-(Your platform doesn't have any specific hints for 64-bit builds.)
+(Your platform doesn't have any specific hints for long doubles.)
EOM
- case "$intsize:$longsize" in
-8:*|*:8) cat <<EOM
-(This is probably okay, as your system is a natively 64-bit system.)
+ fi
+ ;;
+esac
+
+case "$uselongdouble:$d_sqrtl" in
+$define:$undef)
+ $cat <<EOM >&4
+
+*** You requested the use of long doubles but you do not seem to have
+*** the mathematic functions for long doubles. I'm disabling the use
+*** of long doubles.
+
EOM
- ;;
- esac
- case "$gccversion" in
- '') ;;
- *) case "$ccflags" in
- *-DUSE_64_BITS*) ;;
- *) $cat <<EOM
-But since you seem to be using gcc, I will now add -DUSE_64_BITS
-to the compilation flags to get long longs.
-EOM
- ccflags="$ccflags -DUSE_64_BITS"
- ;;
- esac
- ;;
- esac
+ uselongdouble=$undef
+ ;;
+esac
+
+: check for length of double
+echo " "
+case "$doublesize" in
+'')
+ echo "Checking to see how big your double precision numbers are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(double));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`./try`
+ echo "Your double is $doublesize bytes long."
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
+: check for long doubles
+echo " "
+echo "Checking to see if you have long double..." >&4
+echo 'int main() { long double x = 7.0; }' > try.c
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have long double."
+else
+ val="$undef"
+ echo "You do not have long double."
+fi
+$rm try.*
+set d_longdbl
+eval $setvar
+
+: check for length of long double
+case "${d_longdbl}${longdblsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long doubles are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", sizeof(long double));
+}
+EOCP
+ set try
+ set try
+ if eval $compile; then
+ longdblsize=`./try$exe_ext`
+ echo "Your long doubles are $longdblsize bytes long."
+ else
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a long double (in bytes)?"
+ . ./myread
+ longdblsize="$ans"
fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
;;
esac
+$rm -f try.* try
: determine the architecture name
echo " "
esac
;;
esac
-case "$use64bits" in
-$define)
+case "$use64bitint$use64bitall" in
+*"$define"*)
case "$archname64" in
'')
+ echo "This architecture is naturally 64-bit, not changing architecture name." >&4
;;
*)
+ case "$use64bitint" in
+ "$define") echo "64 bit integers selected." >&4 ;;
+ esac
+ case "$use64bitall" in
+ "$define") echo "Maximal 64 bitness selected." >&4 ;;
+ esac
case "$archname" in
*-$archname64*) echo "...and architecture name already has $archname64." >&4
;;
;;
esac
esac
+case "$uselongdouble" in
+$define)
+ echo "Long doubles selected." >&4
+ case "$longdblsize" in
+ $doublesize)
+ "...but long doubles are equal to doubles, not changing architecture name." >&4
+ ;;
+ *)
+ case "$archname" in
+ *-ld*) echo "...and architecture name already has -ld." >&4
+ ;;
+ *) archname="$archname-ld"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
: determine root of directory hierarchy where package will be installed.
case "$prefix" in
esac;;
esac'
-: set the base revision
-baserev=5.0
-
: get the patchlevel
echo " "
echo "Getting the current patchlevel..." >&4
if $test -r $rsrc/patchlevel.h;then
+ revision=`awk '/define[ ]+PERL_REVISION/ {print $3}' $rsrc/patchlevel.h`
patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
else
+ revision=0
patchlevel=0
subversion=0
api_revision=0
api_version=0
api_subversion=0
fi
-$echo $n "(You have $package" $c
-case "$package" in
-"*$baserev") ;;
-*) $echo $n " $baserev" $c ;;
-esac
-$echo $n " patchlevel $patchlevel" $c
-test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
-echo ".)"
+$echo "(You have $package version $patchlevel subversion $subversion.)"
case "$osname" in
dos|vms)
: XXX Should be a Configure test for double-dots in filenames.
- version=`echo $baserev $patchlevel $subversion | \
+ version=`echo $revision $patchlevel $subversion | \
$awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
api_versionstring=`echo $api_revision $api_version $api_subversion | \
$awk '{ printf "%d_%d_%d\n", $1, $2, $3 }'`
;;
*)
- version=`echo $baserev $patchlevel $subversion | \
+ version=`echo $revision $patchlevel $subversion | \
$awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
api_versionstring=`echo $api_revision $api_version $api_subversion | \
$awk '{ printf "%d.%d.%d\n", $1, $2, $3 }'`
*) dflt='lib/perl5' ;;
esac
;;
-*) dflt='lib/perl5' ;;
+*) dflt="$installstyle" ;;
esac
: Probably not worth prompting for this since we prompt for all
: the directories individually, and the prompt would be too long and
;;
*) $cat <<EOM
-Perl 5.006 can be compiled for binary compatibility with 5.005.
-If you decide to do so, you will be able to continue using most
-of the extensions that were compiled for Perl 5.005.
+This version of Perl can be compiled for binary compatibility with 5.005.
+If you decide to do so, you will be able to continue using most of the
+extensions that were compiled for Perl 5.005.
EOM
case "$bincompat5005$d_bincompat5005" in
$rm -f malloc.[co]
$cat <<EOM
-The installation process will also create a directory for
-vendor-supplied add-ons. Vendors who supply perl with their system
-may find it convenient to place all vendor-supplied files in this
-directory rather than in the main distribution directory. This will
-ease upgrades between binary-compatible maintenance versions of perl.
-
-Of course you may also use these directories in whatever way you see
-fit. For example, you might use them to access modules shared over a
-company-wide network.
-
-The default answer should be fine for most people.
-This causes further questions about vendor add-ons to be skipped
-and no vendor-specific directories will be configured for perl.
-
-EOM
-rp='Do you want to configure vendor-specific add-on directories?'
-case "$usevendorprefix" in
-define|true|[yY]*) dflt=y ;;
-*) dflt=n ;;
-esac
-. ./myread
-case "$ans" in
-[yY]*) fn=d~+
- rp='Installation prefix to use for vendor-supplied add-ons?'
- case "$vendorprefix" in
- '') dflt='' ;;
- *) dflt=$vendorprefix ;;
- esac
- . ./getfile
- oldvendorprefix=''
- case "$vendorprefix" in
- '') ;;
- *) case "$ans" in
- "$prefix") ;;
- *) oldvendorprefix="$prefix";;
- esac
- ;;
- esac
- usevendorprefix="$define"
- vendorprefix="$ans"
- vendorprefixexp="$ansexp"
- ;;
-*) usevendorprefix="$undef"
- vendorprefix=''
- vendorprefixexp=''
- ;;
-esac
-
-case "$vendorprefix" in
-'') d_vendorlib="$undef"
- vendorlib=''
- vendorlibexp=''
- ;;
-*) d_vendorlib="$define"
- : determine where vendor-supplied modules go.
- : Usual default is /usr/local/lib/perl5/vendor_perl/$version
- prog=`echo $package | $sed 's/-*[0-9.]*$//'`
- case "$installstyle" in
- *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
- *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
- esac
- fn=d~+
- rp='Pathname for the vendor-supplied library files?'
- . ./getfile
- vendorlib="$ans"
- vendorlibexp="$ansexp"
- : Change installation prefix, if necessary.
- if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
- else
- installvendorlib="$vendorlibexp"
- fi
- ;;
-esac
-
-: Cruising for prototypes
-echo " "
-echo "Checking out function prototypes..." >&4
-$cat >prototype.c <<'EOCP'
-int main(int argc, char *argv[]) {
- exit(0);}
-EOCP
-if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
- echo "Your C compiler appears to support function prototypes."
- val="$define"
-else
- echo "Your C compiler doesn't seem to understand function prototypes."
- val="$undef"
-fi
-set prototype
-eval $setvar
-$rm -f prototype*
-
-case "$prototype" in
-"$define") ;;
-*) ansi2knr='ansi2knr'
- echo " "
- cat <<EOM >&4
-
-$me: FATAL ERROR:
-This version of $package can only be compiled by a compiler that
-understands function prototypes. Unfortunately, your C compiler
- $cc $ccflags
-doesn't seem to understand them. Sorry about that.
-
-If GNU cc is available for your system, perhaps you could try that instead.
-
-Eventually, we hope to support building Perl with pre-ANSI compilers.
-If you would like to help in that effort, please contact <perlbug@perl.org>.
-
-Aborting Configure now.
-EOM
- exit 2
- ;;
-esac
-
-: determine where public executables go
-echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
-fi
-bin="$ans"
-binexp="$ansexp"
-: Change installation prefix, if necessary.
-: XXX Bug? -- ignores Configure -Dinstallprefix setting.
-if $test X"$prefix" != X"$installprefix"; then
- installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
-else
- installbin="$binexp"
-fi
-
-$cat <<EOM
-
After $package is installed, you may wish to install various
add-on modules and utilities. Typically, these add-ons will
be installed under $prefix with the rest
*) dflt=$siteprefix ;;
esac
. ./getfile
+: XXX Prefixit unit does not yet support siteprefix and vendorprefix
oldsiteprefix=''
case "$siteprefix" in
'') ;;
-*)
- case "$ans" in
+*) case "$ans" in
"$prefix") ;;
*) oldsiteprefix="$prefix";;
esac
- ;;
-esac
-siteprefix="$ans"
-siteprefixexp="$ansexp"
-
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$version
-: The default "style" setting is made in installstyle.U
-: XXX No longer works with Prefixit stuff.
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$installstyle" in
-*lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
-*) dflt=$siteprefix/lib/site_$prog/$version ;;
-esac
-$cat <<EOM
-
-The installation process will create a directory for
-site-specific extensions and modules. Most users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
-. ./getfile
-sitelib="$ans"
-sitelibexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitelib=`echo $sitelibexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitelib="$sitelibexp"
-fi
-
-: Determine list of previous versions to include in @INC
-$cat > getverlist <<EOPL
-#!$perl -w
-use File::Basename;
-\$api_versionstring = "$api_versionstring";
-\$version = "$version";
-\$sitelib = "$sitelib";
-\$archname = "$archname";
-EOPL
- $cat >> getverlist <<'EOPL'
-# Can't have leading @ because metaconfig interprets it as a command!
-;@inc_version_list=();
-$stem=dirname($sitelib);
-# Redo to do opendir/readdir?
-if (-d $stem) {
- chdir($stem);
- ;@candidates = glob("5.*");
-}
-else {
- ;@candidates = ();
-}
-
-# XXX ToDo: These comparisons must be reworked when two-digit
-# subversions come along, so that 5.7.10 compares as greater than
-# 5.7.3! By that time, hope that 5.6.x is sufficiently
-# widespread that we can use the built-in version vectors rather
-# than reinventing them here. For 5.6.0, however, we must
-# assume this script will likely be run by 5.005_0x. --AD 1/2000.
-foreach $d (@candidates) {
- if ($d lt $version) {
- if ($d ge $api_versionstring) {
- unshift(@inc_version_list, "$d/$archname", $d);
- }
- elsif ($d ge "5.005") {
- unshift(@inc_version_list, $d);
- }
- }
- else {
- # Skip newer version. I.e. don't look in
- # 5.7.0 if we're installing 5.6.1.
- }
-}
-
-if (@inc_version_list) {
- print join(' ', @inc_version_list);
-}
-else {
- # Blank space to preserve value for next Configure run.
- print " ";
-}
-EOPL
-chmod +x getverlist
-case "$inc_version_list" in
-'') if test -x $perl; then
- dflt=`$perl getverlist`
- else
- dflt='none'
- fi
- ;;
-$undef) dflt='none' ;;
-*) dflt="$inc_version_list" ;;
-esac
-$cat <<'EOM'
-
-In order to ease the process of upgrading, this version of perl
-can be configured to use modules built and installed with earlier
-versions of perl that were installed under $prefix. Specify here
-the list of earlier versions that this version of perl should check.
-If Configure detected no earlier versions of perl installed under
-$prefix, then the list will be empty. Answer 'none' to tell perl
-to not search earlier versions.
-
-The default should almost always be sensible, so if you're not sure,
-just accept the default.
-EOM
-
-rp='List of earlier versions to include in @INC?'
-. ./myread
-case "$ans" in
-[Nn]one) inc_version_list=' ' ;;
-*) inc_version_list="$ans" ;;
+ ;;
esac
-case "$inc_version_list" in
-''|' ')
- inc_version_list_init='0';;
-*) inc_version_list_init=`echo $inc_version_list |
- $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl/$version
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$sitelib" in
+'') case "$installstyle" in
+ *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
+ *) dflt=$siteprefix/lib/site_$prog/$version ;;
+ esac
+ ;;
+*) dflt="$sitelib"
;;
esac
-$rm -f getverlist
+$cat <<EOM
-: determine whether to install perl also as /usr/bin/perl
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
-echo " "
-if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
- $cat <<EOM
-Many scripts expect to perl to be installed as /usr/bin/perl.
-I can install the perl you are about to compile also as /usr/bin/perl
-(in addition to $installbin/perl).
EOM
- case "$installusrbinperl" in
- "$undef"|[nN]*) dflt='n';;
- *) dflt='y';;
- esac
- rp="Do you want to install perl as /usr/bin/perl?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef" ;;
- esac
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+sitelib="$ans"
+sitelibexp="$ansexp"
+sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
else
- val="$undef"
+ installsitelib="$sitelibexp"
fi
-set installusrbinperl
-eval $setvar
-echo " "
-echo "Checking for GNU C Library..." >&4
-cat >gnulibc.c <<EOM
-#include <stdio.h>
-int main()
-{
-#ifdef __GLIBC__
- exit(0);
-#else
- exit(1);
-#endif
-}
+: determine where site specific architecture-dependent libraries go.
+: sitelib default is /usr/local/lib/perl5/site_perl/$version
+: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
+: sitelib may have an optional trailing /share.
+case "$sitearch" in
+'') dflt=`echo $sitelib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+*) dflt="$sitearch"
+ ;;
+esac
+set sitearch sitearch none
+eval $prefixit
+$cat <<EOM
+
+The installation process will also create a directory for
+architecture-dependent site-specific extensions and modules.
+
EOM
-set gnulibc
-if eval $compile_ok && ./gnulibc; then
- val="$define"
- echo "You are using the GNU C Library"
+fn=d~+
+rp='Pathname for the site-specific architecture-dependent library files?'
+. ./getfile
+sitearch="$ans"
+sitearchexp="$ansexp"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
else
- val="$undef"
- echo "You are not using the GNU C Library"
+ installsitearch="$sitearchexp"
fi
-$rm -f gnulibc*
-set d_gnulibc
-eval $setvar
-: see if nm is to be used to determine whether a symbol is defined or not
-case "$usenm" in
-'')
- dflt=''
- case "$d_gnulibc" in
- "$define")
- echo " "
- echo "nm probably won't work on the GNU C Library." >&4
- dflt=n
- ;;
- esac
- case "$dflt" in
- '')
- if $test "$osname" = aix -a ! -f /lib/syscalls.exp; then
- echo " "
- echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
- echo "'nm' won't be sufficient on this sytem." >&4
- dflt=n
- fi
- ;;
- esac
- case "$dflt" in
- '') dflt=`$egrep 'inlibc|csym' $rsrc/Configure | wc -l 2>/dev/null`
- if $test $dflt -gt 20; then
- dflt=y
- else
- dflt=n
- fi
- ;;
- esac
- ;;
-*)
- case "$usenm" in
- true|$define) dflt=y;;
- *) dflt=n;;
- esac
- ;;
-esac
$cat <<EOM
-I can use $nm to extract the symbols from your C libraries. This
-is a time consuming task which may generate huge output on the disk (up
-to 3 megabytes) but that should make the symbols extraction faster. The
-alternative is to skip the 'nm' extraction part and to compile a small
-test program instead to determine whether each symbol is present. If
-you have a fast C compiler and/or if your 'nm' output cannot be parsed,
-this may be the best solution.
+The installation process will also create a directory for
+vendor-supplied add-ons. Vendors who supply perl with their system
+may find it convenient to place all vendor-supplied files in this
+directory rather than in the main distribution directory. This will
+ease upgrades between binary-compatible maintenance versions of perl.
-You probably shouldn't let me use 'nm' if you are using the GNU C Library.
+Of course you may also use these directories in whatever way you see
+fit. For example, you might use them to access modules shared over a
+company-wide network.
+
+The default answer should be fine for most people.
+This causes further questions about vendor add-ons to be skipped
+and no vendor-specific directories will be configured for perl.
EOM
-rp="Shall I use $nm to extract C symbols from the libraries?"
+rp='Do you want to configure vendor-specific add-on directories?'
+case "$usevendorprefix" in
+define|true|[yY]*) dflt=y ;;
+*) : User may have set vendorprefix directly on Configure command line.
+ case "$vendorprefix" in
+ ''|' ') dflt=n ;;
+ *) dflt=y ;;
+ esac
+ ;;
+esac
. ./myread
case "$ans" in
-[Nn]*) usenm=false;;
-*) usenm=true;;
-esac
-
-runnm=$usenm
-case "$reuseval" in
-true) runnm=false;;
-esac
-
-: nm options which may be necessary
-case "$nm_opt" in
-'') if $test -f /mach_boot; then
- nm_opt='' # Mach
- elif $test -d /usr/ccs/lib; then
- nm_opt='-p' # Solaris (and SunOS?)
- elif $test -f /dgux; then
- nm_opt='-p' # DG-UX
- elif $test -f /lib64/rld; then
- nm_opt='-p' # 64-bit Irix
- else
- nm_opt=''
- fi;;
-esac
-
-: nm options which may be necessary for shared libraries but illegal
-: for archive libraries. Thank you, Linux.
-case "$nm_so_opt" in
-'') case "$myuname" in
- *linux*)
- if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
- nm_so_opt='--dynamic'
- fi
+[yY]*) fn=d~+
+ rp='Installation prefix to use for vendor-supplied add-ons?'
+ case "$vendorprefix" in
+ '') dflt='' ;;
+ *) dflt=$vendorprefix ;;
+ esac
+ . ./getfile
+ : XXX Prefixit unit does not yet support siteprefix and vendorprefix
+ oldvendorprefix=''
+ case "$vendorprefix" in
+ '') ;;
+ *) case "$ans" in
+ "$prefix") ;;
+ *) oldvendorprefix="$prefix";;
+ esac
;;
esac
+ usevendorprefix="$define"
+ vendorprefix="$ans"
+ vendorprefixexp="$ansexp"
+ ;;
+*) usevendorprefix="$undef"
+ vendorprefix=''
+ vendorprefixexp=''
;;
esac
-case "$runnm" in
-true)
-: get list of predefined functions in a handy place
-echo " "
-case "$libc" in
-'') libc=unknown
- case "$libs" in
- *-lc_s*) libc=`./loc libc_s$_a $libc $libpth`
- esac
+case "$vendorprefix" in
+'') d_vendorlib="$undef"
+ vendorlib=''
+ vendorlibexp=''
;;
-esac
-libnames='';
-case "$libs" in
-'') ;;
-*) for thislib in $libs; do
- case "$thislib" in
- -lc|-lc_s)
- : Handle C library specially below.
- ;;
- -l*)
- thislib=`echo $thislib | $sed -e 's/^-l//'`
- if try=`./loc lib$thislib.$so.'*' X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib.$so X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib$_a X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc lib$thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc $thislib X $libpth`; $test -f "$try"; then
- :
- elif try=`./loc Slib$thislib$_a X $xlibpth`; $test -f "$try"; then
- :
- else
- try=''
- fi
- libnames="$libnames $try"
+*) d_vendorlib="$define"
+ : determine where vendor-supplied modules go.
+ : Usual default is /usr/local/lib/perl5/vendor_perl/$version
+ case "$vendorlib" in
+ '')
+ prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ case "$installstyle" in
+ *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog/$version ;;
+ *) dflt=$vendorprefix/lib/vendor_$prog/$version ;;
+ esac
+ ;;
+ *) dflt="$vendorlib"
;;
- *) libnames="$libnames $thislib" ;;
esac
- done
+ fn=d~+
+ rp='Pathname for the vendor-supplied library files?'
+ . ./getfile
+ vendorlib="$ans"
+ vendorlibexp="$ansexp"
;;
esac
-xxx=normal
-case "$libc" in
-unknown)
- set /lib/libc.$so
- for xxx in $libpth; do
- $test -r $1 || set $xxx/libc.$so
- : The messy sed command sorts on library version numbers.
- $test -r $1 || \
- set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
- tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
- h
- s/[0-9][0-9]*/0000&/g
- s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
- G
- s/\n/ /' | \
- sort | $sed -e 's/^.* //'`
- eval set \$$#
- done
- $test -r $1 || set /usr/ccs/lib/libc.$so
- $test -r $1 || set /lib/libsys_s$_a
+vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorlib="$vendorlibexp"
+fi
+
+case "$vendorprefix" in
+'') d_vendorarch="$undef"
+ vendorarch=''
+ vendorarchexp=''
;;
-*)
- set blurfl
+*) d_vendorarch="$define"
+ : determine where vendor-supplied architecture-dependent libraries go.
+ : vendorlib default is /usr/local/lib/perl5/vendor_perl/$version
+ : vendorarch default is /usr/local/lib/perl5/vendor_perl/$version/$archname
+ : vendorlib may have an optional trailing /share.
+ case "$vendorarch" in
+ '') dflt=`echo $vendorlib | $sed 's,/share$,,'`
+ dflt="$dflt/$archname"
+ ;;
+ *) dflt="$vendorarch" ;;
+ esac
+ fn=d~+
+ rp='Pathname for vendor-supplied architecture-dependent files?'
+ . ./getfile
+ vendorarch="$ans"
+ vendorarchexp="$ansexp"
;;
esac
-if $test -r "$1"; then
- echo "Your (shared) C library seems to be in $1."
- libc="$1"
-elif $test -r /lib/libc && $test -r /lib/clib; then
- echo "Your C library seems to be in both /lib/clib and /lib/libc."
- xxx=apollo
- libc='/lib/clib /lib/libc'
- if $test -r /lib/syslib; then
- echo "(Your math library is in /lib/syslib.)"
- libc="$libc /lib/syslib"
- fi
-elif $test -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- echo "Your C library seems to be in $libc, as you said before."
-elif $test -r $incpath/usr/lib/libc$_a; then
- libc=$incpath/usr/lib/libc$_a;
- echo "Your C library seems to be in $libc. That's fine."
-elif $test -r /lib/libc$_a; then
- libc=/lib/libc$_a;
- echo "Your C library seems to be in $libc. You're normal."
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
else
- if tans=`./loc libc$_a blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc libc blurfl/dyick $libpth`; $test -r "$tans"; then
- libnames="$libnames "`./loc clib blurfl/dyick $libpth`
- elif tans=`./loc clib blurfl/dyick $libpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Slibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- elif tans=`./loc Mlibc$_a blurfl/dyick $xlibpth`; $test -r "$tans"; then
- :
- else
- tans=`./loc Llibc$_a blurfl/dyick $xlibpth`
- fi
- if $test -r "$tans"; then
- echo "Your C library seems to be in $tans, of all places."
- libc=$tans
- else
- libc='blurfl'
- fi
+ installvendorarch="$vendorarchexp"
fi
-if $test $xxx = apollo -o -r "$libc" || (test -h "$libc") >/dev/null 2>&1; then
- dflt="$libc"
- cat <<EOM
-If the guess above is wrong (which it might be if you're using a strange
-compiler, or your machine supports multiple models), you can override it here.
+: Final catch-all directories to search
+$cat <<EOM
+Lastly, you can have perl look in other directories for extensions and
+modules in addition to those already specified.
+These directories will be searched after
+ $sitearch
+ $sitelib
EOM
-else
- dflt=''
- echo $libpth | tr ' ' $trnl | sort | uniq > libpath
- cat >&4 <<EOM
-I can't seem to find your C library. I've looked in the following places:
+test X"$vendorlib" != "X" && echo ' ' $vendorlib
+test X"$vendorarch" != "X" && echo ' ' $vendorarch
+echo ' '
+case "$otherlibdirs" in
+''|' ') dflt='none' ;;
+*) dflt="$otherlibdirs" ;;
+esac
+$cat <<EOM
+Enter a colon-separated set of extra paths to include in perl's @INC
+search path, or enter 'none' for no extra paths.
EOM
- $sed 's/^/ /' libpath
- cat <<EOM
-None of these seems to contain your C library. I need to get its name...
+rp='Colon-separated list of additional directories for perl to search?'
+. ./myread
+case "$ans" in
+' '|''|none) otherlibdirs=' ' ;;
+*) otherlibdirs="$ans" ;;
+esac
+case "$otherlibdirs" in
+' ') val=$undef ;;
+*) val=$define ;;
+esac
+set d_perl_otherlibdirs
+eval $setvar
-EOM
+: Cruising for prototypes
+echo " "
+echo "Checking out function prototypes..." >&4
+$cat >prototype.c <<'EOCP'
+int main(int argc, char *argv[]) {
+ exit(0);}
+EOCP
+if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
+ echo "Your C compiler appears to support function prototypes."
+ val="$define"
+else
+ echo "Your C compiler doesn't seem to understand function prototypes."
+ val="$undef"
fi
-fn=f
-rp='Where is your C library?'
+set prototype
+eval $setvar
+$rm -f prototype*
+
+case "$prototype" in
+"$define") ;;
+*) ansi2knr='ansi2knr'
+ echo " "
+ cat <<EOM >&4
+
+$me: FATAL ERROR:
+This version of $package can only be compiled by a compiler that
+understands function prototypes. Unfortunately, your C compiler
+ $cc $ccflags
+doesn't seem to understand them. Sorry about that.
+
+If GNU cc is available for your system, perhaps you could try that instead.
+
+Eventually, we hope to support building Perl with pre-ANSI compilers.
+If you would like to help in that effort, please contact <perlbug@perl.org>.
+
+Aborting Configure now.
+EOM
+ exit 2
+ ;;
+esac
+
+: determine where public executables go
+echo " "
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
. ./getfile
-libc="$ans"
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+bin="$ans"
+binexp="$ansexp"
+: Change installation prefix, if necessary.
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+if $test X"$prefix" != X"$installprefix"; then
+ installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
+else
+ installbin="$binexp"
+fi
+
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp:$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5 && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ fi
+ done
+ ;;
+*) perl5="$perl5"
+ ;;
+esac
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
+esac
+
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl5 -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$stem = "$sitelib_stem";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+# XXX Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
+
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, grep { -d } $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
+
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5"; then
+ dflt=`$perl5 getverlist`
+ else
+ dflt='none'
+ fi
+ ;;
+$undef) dflt='none' ;;
+*) dflt="$inc_version_list" ;;
+esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+case "$dflt" in
+5.005) case "$bincompat5005" in
+ $define|true|[yY]*) ;;
+ *) dflt=none ;;
+ esac
+ ;;
+esac
+$cat <<'EOM'
+
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
+EOM
+
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' ') inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0';;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ ;;
+esac
+$rm -f getverlist
-echo " "
-echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
-set X `cat libnames`
-shift
-xxx=files
-case $# in 1) xxx=file; esac
-echo "Extracting names from the following $xxx for later perusal:" >&4
-echo " "
-$sed 's/^/ /' libnames >&4
-echo " "
-$echo $n "This may take a while...$c" >&4
+: determine whether to install perl also as /usr/bin/perl
-for file in $*; do
- case $file in
- *$so*) $nm $nm_so_opt $nm_opt $file 2>/dev/null;;
- *) $nm $nm_opt $file 2>/dev/null;;
+echo " "
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+ $cat <<EOM
+Many scripts expect perl to be installed as /usr/bin/perl.
+I can install the perl you are about to compile also as /usr/bin/perl
+(in addition to $installbin/perl).
+EOM
+ case "$installusrbinperl" in
+ "$undef"|[nN]*) dflt='n';;
+ *) dflt='y';;
+ esac
+ rp="Do you want to install perl as /usr/bin/perl?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef" ;;
esac
-done >libc.tmp
-
-$echo $n ".$c"
-$grep fprintf libc.tmp > libc.ptf
-xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
-xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
-xxx='[ADTSIW]'
-if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__*//' -e 's/^\([a-zA-Z_0-9$]*\).*xtern.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/|UNDEF/d' -e '/FUNC..GL/s/^.*|__*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.* D __*//p' -e 's/^.* D //p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^_//' -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$grep '|' | $sed -n -e '/|COMMON/d' -e '/|DATA/d' \
- -e '/ file/d' -e 's/^\([^ ]*\).*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|FUNC |GLOB .*|//p' -e 's/^.*|FUNC |WEAK .*|//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^__//' -e '/|Undef/d' -e '/|Proc/s/ .*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^.*|Proc .*|Text *| *//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e '/Def. Text/s/.* \([^ ]*\)\$/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/^[-0-9a-f ]*_\(.*\)=.*/\1/p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="$sed -n -e 's/.*\.text n\ \ \ \.//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
-elif com="sed -n -e 's/^__.*//' -e 's/[ ]*D[ ]*[0-9]*.*//p'";\
- eval $xscan;\
- $contains '^fprintf$' libc.list >/dev/null 2>&1; then
- eval $xrun
else
- $nm -p $* 2>/dev/null >libc.tmp
- $grep fprintf libc.tmp > libc.ptf
- if com="$sed -n -e 's/^.* [ADTSIW] *_[_.]*//p' -e 's/^.* [ADTSIW] //p'";\
- eval $xscan; $contains '^fprintf$' libc.list >/dev/null 2>&1
- then
- nm_opt='-p'
- eval $xrun
- else
- echo " "
- echo "$nm didn't seem to work right. Trying $ar instead..." >&4
- com=''
- if $ar t $libc > libc.tmp && $contains '^fprintf$' libc.tmp >/dev/null 2>&1; then
- for thisname in $libnames $libc; do
- $ar t $thisname >>libc.tmp
- done
- $sed -e "s/\\$_o\$//" < libc.tmp > libc.list
- echo "Ok." >&4
- elif test "X$osname" = "Xos2" && $ar tv $libc > libc.tmp; then
- # Repeat libc to extract forwarders to DLL entries too
- for thisname in $libnames $libc; do
- $ar tv $thisname >>libc.tmp
- # Revision 50 of EMX has bug in $ar.
- # it will not extract forwarders to DLL entries
- # Use emximp which will extract exactly them.
- emximp -o tmp.imp $thisname \
- 2>/dev/null && \
- $sed -e 's/^\([_a-zA-Z0-9]*\) .*$/\1/p' \
- < tmp.imp >>libc.tmp
- $rm tmp.imp
- done
- $sed -e "s/\\$_o\$//" -e 's/^ \+//' < libc.tmp > libc.list
- echo "Ok." >&4
- else
- echo "$ar didn't seem to work right." >&4
- echo "Maybe this is a Cray...trying bld instead..." >&4
- if bld t $libc | $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" > libc.list
- then
- for thisname in $libnames; do
- bld t $libnames | \
- $sed -e 's/.*\///' -e "s/\\$_o:.*\$//" >>libc.list
- $ar t $thisname >>libc.tmp
- done
- echo "Ok." >&4
- else
- echo "That didn't work either. Giving up." >&4
- exit 1
- fi
- fi
- fi
-fi
-nm_extract="$com"
-if $test -f /lib/syscalls.exp; then
- echo " "
- echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
+ val="$undef"
fi
-;;
-esac
-$rm -f libnames libpath
+set installusrbinperl
+eval $setvar
: see if dld is available
set dld.h i_dld
eval $inhdr
-: is a C symbol defined?
-csym='tlook=$1;
-case "$3" in
--v) tf=libc.tmp; tc=""; tdc="";;
--a) tf=libc.tmp; tc="[0]"; tdc="[]";;
-*) tlook="^$1\$"; tf=libc.list; tc="()"; tdc="()";;
-esac;
-tx=yes;
-case "$reuseval-$4" in
-true-) ;;
-true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;;
-esac;
-case "$tx" in
-yes)
- case "$runnm" in
- true)
- if $contains $tlook $tf >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;;
- *)
- echo "int main() { extern short $1$tdc; printf(\"%hd\", $1$tc); }" > t.c;
- if $cc $optimize $ccflags $ldflags -o t t.c $libs >/dev/null 2>&1;
- then tval=true;
- else tval=false;
- fi;
- $rm -f t t.c;;
- esac;;
-*)
- case "$tval" in
- $define) tval=true;;
- *) tval=false;;
- esac;;
-esac;
-eval "$2=$tval"'
-
-: define an is-in-libc? function
-inlibc='echo " "; td=$define; tu=$undef;
-sym=$1; var=$2; eval "was=\$$2";
-tx=yes;
-case "$reuseval$was" in
-true) ;;
-true*) tx=no;;
-esac;
-case "$tx" in
-yes)
- set $sym tres -f;
- eval $csym;
- case "$tres" in
- true)
- echo "$sym() found." >&4;
- case "$was" in $undef) . ./whoa; esac; eval "$var=\$td";;
- *)
- echo "$sym() NOT found." >&4;
- case "$was" in $define) . ./whoa; esac; eval "$var=\$tu";;
- esac;;
-*)
- case "$was" in
- $define) echo "$sym() found." >&4;;
- *) echo "$sym() NOT found." >&4;;
- esac;;
-esac'
-
: see if dlopen exists
xxx_runnm="$runnm"
runnm=false
. ./getfile
usedl="$define"
: emulate basename
- dlsrc=`echo $ans | $sed -e 's@.*/\([^/]*\)$@\1@'`
+ dlsrc=`echo $ans | $sed -e 's%.*/\([^/]*\)$%\1%'`
$cat << EOM
hpux) dflt='+z' ;;
next) dflt='none' ;;
irix*) dflt='-KPIC' ;;
- svr4*|esix*|solaris) dflt='-KPIC' ;;
+ svr4*|esix*|solaris|nonstopux) dflt='-KPIC' ;;
sunos) dflt='-pic' ;;
*) dflt='none' ;;
esac
;;
*) case "$osname" in
- svr4*|esix*|solaris) dflt='-fPIC' ;;
+ svr4*|esix*|solaris|nonstopux) dflt='-fPIC' ;;
*) dflt='-fpic' ;;
esac ;;
esac ;;
case "$lddlflags" in
'') case "$osname" in
beos) dflt='-nostart' ;;
- hpux) dflt='-b' ;;
+ hpux) dflt='-b';
+ case "$gccversion" in
+ '') dflt="$dflt +vnocompatwarnings" ;;
+ esac
+ ;;
linux|irix*) dflt='-shared' ;;
next) dflt='none' ;;
solaris) dflt='-G' ;;
sunos) dflt='-assert nodefinitions' ;;
- svr4*|esix*) dflt="-G $ldflags" ;;
+ svr4*|esix*|nonstopux) dflt="-G $ldflags" ;;
*) dflt='none' ;;
esac
;;
esac
for thisflag in $ldflags; do
case "$thisflag" in
- -L*)
+ -L*|-R*)
case " $dflt " in
*" $thisflag "*) ;;
*) dflt="$dflt $thisflag" ;;
;;
*) case "$useshrplib" in
'') case "$osname" in
- svr4*|dgux|dynixptx|esix|powerux|beos|cygwin*)
+ svr4*|nonstopux|dgux|dynixptx|esix|powerux|beos|cygwin*)
dflt=y
also='Building a shared libperl is required for dynamic loading to work on your system.'
;;
*) $cat >&4 <<EOM
WARNING: Use of the shrpdir variable for the installation location of
the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (perlbug@perl.com)
+will not work in this version. Let me (perlbug@perl.org)
know of any problems this may cause.
EOM
none) ldlibpthname='' ;;
esac
+: determine where manual pages are on this system
+echo " "
+case "$sysman" in
+'')
+ syspath='/usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1'
+ syspath="$syspath /usr/man/u_man/man1 /usr/share/man/man1"
+ syspath="$syspath /usr/catman/u_man/man1 /usr/man/l_man/man1"
+ syspath="$syspath /usr/local/man/u_man/man1 /usr/local/man/l_man/man1"
+ syspath="$syspath /usr/man/man.L /local/man/man1 /usr/local/man/man1"
+ sysman=`./loc . /usr/man/man1 $syspath`
+ ;;
+esac
+if $test -d "$sysman"; then
+ echo "System manual is in $sysman." >&4
+else
+ echo "Could not find manual pages in source form." >&4
+fi
+
: determine where manual pages go
set man1dir man1dir none
eval $prefixit
: see if we can have long filenames
echo " "
-rmlist="$rmlist /tmp/cf$$"
-$test -d /tmp/cf$$ || mkdir /tmp/cf$$
first=123456789abcdef
-second=/tmp/cf$$/$first
-$rm -f $first $second
+$rm -f $first
if (echo hi >$first) 2>/dev/null; then
if $test -f 123456789abcde; then
echo 'You cannot have filenames longer than 14 characters. Sigh.' >&4
val="$undef"
else
- if (echo hi >$second) 2>/dev/null; then
- if $test -f /tmp/cf$$/123456789abcde; then
- $cat <<'EOM'
-That's peculiar... You can have filenames longer than 14 characters, but only
-on some of the filesystems. Maybe you are using NFS. Anyway, to avoid problems
-I shall consider your system cannot support long filenames at all.
-EOM
- val="$undef"
- else
- echo 'You can have filenames longer than 14 characters.' >&4
- val="$define"
- fi
- else
- $cat <<'EOM'
-How confusing! Some of your filesystems are sane enough to allow filenames
-longer than 14 characters but some others like /tmp can't even think about them.
-So, for now on, I shall assume your kernel does not allow them at all.
-EOM
- val="$undef"
- fi
+ echo 'You can have filenames longer than 14 characters.'>&4
+ val="$define"
fi
else
$cat <<'EOM'
-You can't have filenames longer than 14 chars. You can't even think about them!
+You can't have filenames longer than 14 chars.
+You can't even think about them!
EOM
val="$undef"
fi
set d_flexfnam
eval $setvar
-$rm -rf /tmp/cf$$ 123456789abcde*
+$rm -rf 123456789abcde*
: determine where library module manual pages go
set man3dir man3dir none
echo "If you don't want the manual sources installed, answer 'none'."
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
case "$man3dir" in
-'') dflt=`echo $man1dir | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
+'') dflt=`echo "$man1dir" | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
if $test -d "$privlib/man/man3"; then
cat <<EOM >&4
esac
fi
;;
-' ') dflt=none;;
*) dflt="$man3dir" ;;
esac
+case "$dflt" in
+' ') dflt=none ;;
+esac
echo " "
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
man3dir="$ans"
man3direxp="$ansexp"
-case "$man1dir" in
+case "$man3dir" in
'') man3dir=' '
installman3dir='';;
esac
/[ ]$myhostname[ . ]/p" > hosts
}
tmp_re="[ . ]"
- $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
+ if $test -f hosts; then
+ $test x`$awk "/[0-9].*[ ]$myhostname$tmp_re/ { sum++ }
END { print sum }" hosts` = x1 || tmp_re="[ ]"
- dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
- hosts | $sort | $uniq | \
- $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
- case `$echo X$dflt` in
- X*\ *) echo "(Several hosts in /etc/hosts matched hostname)"
+ dflt=.`$awk "/[0-9].*[ ]$myhostname$tmp_re/ {for(i=2; i<=NF;i++) print \\\$i}" \
+ hosts | $sort | $uniq | \
+ $sed -n -e "s/$myhostname\.\([-a-zA-Z0-9_.]\)/\1/p"`
+ case `$echo X$dflt` in
+ X*\ *) echo "(Several hosts in the database matched hostname)"
+ dflt=.
+ ;;
+ X.) echo "(You do not have fully-qualified names in the hosts database)"
+ ;;
+ esac
+ else
+ echo "(I cannot locate a hosts database anywhere)"
dflt=.
- ;;
- X.) echo "(You do not have fully-qualified names in /etc/hosts)"
- ;;
- esac
+ fi
case "$dflt" in
.)
tans=`./loc resolv.conf X /etc /usr/etc`
If you or somebody else will be maintaining perl at your site, please
fill in the correct e-mail address here so that they may be contacted
if necessary. Currently, the "perlbug" program included with perl
-will send mail to this address in addition to perlbug@perl.com. You may
+will send mail to this address in addition to perlbug@perl.org. You may
enter "none" for no administrator.
EOM
installscript="$scriptdirexp"
fi
-: determine where site specific architecture-dependent libraries go.
-: sitelib default is /usr/local/lib/perl5/site_perl/$version
-: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
-: sitelib may have an optional trailing /share.
-tdflt=`echo $sitelib | $sed 's,/share$,,'`
-tdflt="$tdflt/$archname"
-set sitearch sitearch none
-eval $prefixit
-case "$sitearch" in
-'') dflt="$tdflt" ;;
-*) dflt="$sitearch" ;;
-esac
-$cat <<EOM
-
-The installation process will also create a directory for
-architecture-dependent site-specific extensions and modules.
-
-EOM
-fn=nd~+
-rp='Pathname for the site-specific architecture-dependent library files?'
-. ./getfile
-sitearch="$ans"
-sitearchexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitearch="$sitearchexp"
-fi
-
: determine where add-on public executables go
case "$sitebin" in
'') dflt=$siteprefix/bin ;;
-*) dflt=$sitebin ;;
+*) dflt=$sitebin ;;
esac
fn=d~
rp='Pathname where the add-on public executables should be installed?'
installsitebin="$sitebinexp"
fi
-: see if sqrtl exists
-set sqrtl d_sqrtl
-eval $inlibc
-
-cat <<EOM
-
-Perl can be built to take advantage of long doubles which
-(if available) may give more accuracy and range for floating point numbers.
-
-If this doesn't make any sense to you, just accept the default 'n'.
-EOM
-
-case "$ccflags" in
-*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
+case "$useperlio" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
esac
-rp='Try to use long doubles if available?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselongdouble
-eval $setvar
-
-case "$uselongdouble" in
-true|[yY]*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that long doubles should be used,
-: we may need to set or change some other defaults.
- if $test -f uselongdouble.cbu; then
- echo "Your platform has some specific hints for long doubles, using them..."
- . ./uselongdouble.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for long doubles.)
-EOM
- fi
- ;;
-esac
-
-case "$uselongdouble:$d_sqrtl" in
-$define:$undef)
- $cat <<EOM >&4
-
-You requested the use of long doubles but you do not seem to have
-the mathematic functions for long doubles. I'm disabling the use
-of long doubles.
-EOM
- uselongdouble=$undef
- ;;
-esac
-
cat <<EOM
Previous version of $package used the standard IO mechanisms as defined
problems with some extension modules. Using PerlIO with stdio is safe,
but it is slower than plain stdio and therefore is not the default.
-If this doesn't make any sense to you, just accept the default 'n'.
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-case "$useperlio" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
rp='Use the experimental PerlIO abstraction layer?'
. ./myread
case "$ans" in
;;
esac
set useperlio
-eval $setvar
-
-case "$vendorprefix" in
-'') d_vendorbin="$undef"
- vendorbin=''
- vendorbinexp=''
- ;;
-*) d_vendorbin="$define"
- : determine where vendor-supplied executables go.
- dflt=$vendorprefix/bin
- fn=d~+
- rp='Pathname for the vendor-supplied executables directory?'
- . ./getfile
- vendorbin="$ans"
- vendorbinexp="$ansexp"
- : Change installation prefix, if necessary.
- if $test X"$prefix" != X"$installprefix"; then
- installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
- else
- installvendorbin="$vendorbinexp"
- fi
- ;;
-esac
-
-: check for length of double
-echo " "
-case "$doublesize" in
-'')
- $echo $n "Checking to see how big your double precision numbers are...$c" >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(double));
- exit(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- doublesize=`./try`
- $echo " $doublesize bytes." >&4
- else
- dflt='8'
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a double precision number (in bytes)?"
- . ./myread
- doublesize="$ans"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long doubles
-echo " "
-$echo $n "Checking to see if your system supports long double..." $c >&4
-echo 'int main() { long double x = 7.0; }' > try.c
-set try
-if eval $compile; then
- val="$define"
- echo " Yes, it does." >&4
-else
- val="$undef"
- echo " No, it doesn't." >&4
-fi
-$rm try.*
-set d_longdbl
-eval $setvar
-
-: check for length of long double
-case "${d_longdbl}${longdblsize}" in
-$define)
- echo " "
- $echo $n "Checking to see how big your long doubles are..." $c >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", sizeof(long double));
-}
-EOCP
- set try
- set try
- if eval $compile; then
- longdblsize=`./try$exe_ext`
- $echo " $longdblsize bytes." >&4
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a long double (in bytes)?"
- . ./myread
- longdblsize="$ans"
- fi
- if $test "X$doublesize" = "X$longdblsize"; then
- echo "(That isn't any different from an ordinary double.)"
- fi
- ;;
-esac
-$rm -f try.* try
-
-: Check how to convert floats to strings.
-if test "X$d_Gconvert" = X; then
- echo " "
- echo "Checking for an efficient way to convert floats to strings."
- $cat >try.c <<EOP
-#ifdef TRY_gconvert
-#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
-char *myname = "gconvert";
-#endif
-#ifdef TRY_gcvt
-#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
-char *myname = "gcvt";
-#endif
-#ifdef TRY_qgcvt
-#define Gconvert(x,n,t,b) qgcvt((x),(n),(b))
-char *myname = "qgcvt";
-#define DOUBLETYPE long double
-#endif
-#ifdef TRY_sprintf
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-char *myname = "sprintf";
-#endif
-
-#ifndef DOUBLETYPE
-#define DOUBLETYPE double
-#endif
-
-#include <stdio.h>
-
-#define I_STDLIB $i_stdlib
-#ifdef I_STDLIB
-#include <stdlib.h>
-#endif
-
-int
-checkit(expect, got)
-char *expect;
-char *got;
-{
- if (strcmp(expect, got)) {
- printf("%s oddity: Expected %s, got %s\n",
- myname, expect, got);
- exit(1);
- }
-}
-
-int main()
-{
- char buf[64];
- buf[63] = '\0';
-
- /* This must be 1st test on (which?) platform */
- /* Alan Burlison <AlanBurlsin@unn.unisys.com> */
- Gconvert((DOUBLETYPE)0.1, 8, 0, buf);
- checkit("0.1", buf);
-
- Gconvert((DOUBLETYPE)1.0, 8, 0, buf);
- checkit("1", buf);
-
- Gconvert((DOUBLETYPE)0.0, 8, 0, buf);
- checkit("0", buf);
-
- Gconvert((DOUBLETYPE)-1.0, 8, 0, buf);
- checkit("-1", buf);
-
- /* Some Linux gcvt's give 1.e+5 here. */
- Gconvert((DOUBLETYPE)100000.0, 8, 0, buf);
- checkit("100000", buf);
-
- /* Some Linux gcvt's give -1.e+5 here. */
- Gconvert((DOUBLETYPE)-100000.0, 8, 0, buf);
- checkit("-100000", buf);
-
- exit(0);
-}
-EOP
- case "$d_Gconvert" in
- gconvert*) xxx_list='gconvert gcvt sprintf' ;;
- gcvt*) xxx_list='gcvt gconvert sprintf' ;;
- sprintf*) xxx_list='sprintf gconvert gcvt' ;;
- *) xxx_list='gconvert gcvt sprintf' ;;
- esac
-
- case "$d_longdbl$uselongdouble" in
- definedefine) xxx_list="`echo $xxx_list|sed 's/gcvt/qgcvt gcvt/'`" ;;
- esac
+eval $setvar
- for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert..."
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert() found." >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
- else
- echo "...But $xxx_convert didn't work as I expected."
- fi
- else
- echo "$xxx_convert NOT found." >&4
- fi
- done
-
- case "$xxx_convert" in
- gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
- gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
- qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
- *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+case "$vendorprefix" in
+'') d_vendorbin="$undef"
+ vendorbin=''
+ vendorbinexp=''
+ ;;
+*) d_vendorbin="$define"
+ : determine where vendor-supplied executables go.
+ case "$vendorbin" in
+ '') dflt=$vendorprefix/bin ;;
+ *) dflt="$vendorbin" ;;
esac
+ fn=d~+
+ rp='Pathname for the vendor-supplied executables directory?'
+ . ./getfile
+ vendorbin="$ans"
+ vendorbinexp="$ansexp"
+ ;;
+esac
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
+else
+ installvendorbin="$vendorbinexp"
fi
+: determine whether to only install version-specific parts.
+echo " "
+$cat <<EOM
+Do you want to install only the version-specific parts of the perl
+distribution? Usually you do *not* want to do this.
+EOM
+case "$versiononly" in
+"$define"|[Yy]*|true) dflt='y' ;;
+*) dflt='n';
+esac
+rp="Do you want to install only the version-specific parts of perl?"
+. ./myread
+case "$ans" in
+[yY]*) val="$define";;
+*) val="$undef" ;;
+esac
+set versiononly
+eval $setvar
+
+: see if qgcvt exists
+set qgcvt d_qgcvt
+eval $inlibc
+
echo " "
if $test X"$d_longdbl" = X"$define"; then
case "$yyy" in
123.456)
sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
- sPRIFldbl='"F"'; sPRIGldbl='"G"'; sPRIEldbl='"E"';
+ sPRIFUldbl='"F"'; sPRIGUldbl='"G"'; sPRIEUldbl='"E"';
echo "We will use %f."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
- sPRIFldbl='"llF"'; sPRIGldbl='"llG"'; sPRIEldbl='"llE"';
+ sPRIFUldbl='"llF"'; sPRIGUldbl='"llG"'; sPRIEUldbl='"llE"';
echo "We will use %llf."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
- sPRIFldbl='"LF"'; sPRIGldbl='"LG"'; sPRIEldbl='"LE"';
+ sPRIFUldbl='"LF"'; sPRIGUldbl='"LG"'; sPRIEUldbl='"LE"';
echo "We will use %Lf."
;;
esac
case "$yyy" in
123.456)
sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
- sPRIFldbl='"lF"'; sPRIGldbl='"lG"'; sPRIEldbl='"lE"';
+ sPRIFUldbl='"lF"'; sPRIGUldbl='"lG"'; sPRIEUldbl='"lE"';
echo "We will use %lf."
;;
esac
if $test X"$sPRIfldbl" = X; then
echo "Cannot figure out how to print long doubles." >&4
+else
+ sSCNfldbl=$sPRIfldbl # expect consistency
fi
$rm -f try try.*
case "$sPRIfldbl" in
'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
- d_PRIFldbl="$undef"; d_PRIGldbl="$undef"; d_PRIEldbl="$undef";
+ d_PRIFUldbl="$undef"; d_PRIGUldbl="$undef"; d_PRIEUldbl="$undef";
+ d_SCNfldbl="$undef";
;;
*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
- d_PRIFldbl="$define"; d_PRIGldbl="$define"; d_PRIEldbl="$define";
+ d_PRIFUldbl="$define"; d_PRIGUldbl="$define"; d_PRIEUldbl="$define";
+ d_SCNfldbl="$define";
;;
esac
+: Check how to convert floats to strings.
+echo " "
+echo "Checking for an efficient way to convert floats to strings."
+echo " " > try.c
+case "$uselongdouble" in
+"$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_longdbl" in
+"$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_PRIgldbl" in
+"$define") echo "#define HAS_PRIgldbl" >>try.c ;;
+esac
+$cat >>try.c <<EOP
+#ifdef TRY_gconvert
+#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
+char *myname = "gconvert";
+#endif
+#ifdef TRY_gcvt
+#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
+char *myname = "gcvt";
+#endif
+#ifdef TRY_qgcvt
+#define Gconvert(x,n,t,b) qgcvt((x),(n),(b))
+char *myname = "qgcvt";
+#define DOUBLETYPE long double
+#endif
+#ifdef TRY_sprintf
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && defined(HAS_PRIgldbl)
+#define Gconvert(x,n,t,b) sprintf((b),"%.*"$sPRIgldbl,(n),(x))
+#else
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+#endif
+char *myname = "sprintf";
+#endif
+
+#ifndef DOUBLETYPE
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
+#define DOUBLETYPE long double
+#else
+#define DOUBLETYPE double
+#endif
+#endif
+
+#include <stdio.h>
+
+#define I_STDLIB $i_stdlib
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+
+int
+checkit(expect, got)
+char *expect;
+char *got;
+{
+ if (strcmp(expect, got)) {
+ printf("%s oddity: Expected %s, got %s\n",
+ myname, expect, got);
+ exit(1);
+ }
+}
+
+int main()
+{
+ char buf[64];
+ buf[63] = '\0';
+
+ /* This must be 1st test on (which?) platform */
+ /* Alan Burlison <AlanBurlsin@unn.unisys.com> */
+ Gconvert((DOUBLETYPE)0.1, 8, 0, buf);
+ checkit("0.1", buf);
+
+ Gconvert((DOUBLETYPE)1.0, 8, 0, buf);
+ checkit("1", buf);
+
+ Gconvert((DOUBLETYPE)1.1, 8, 0, buf);
+ checkit("1.1", buf);
+
+ Gconvert((DOUBLETYPE)1.01, 8, 0, buf);
+ checkit("1.01", buf);
+
+ Gconvert((DOUBLETYPE)1.001, 8, 0, buf);
+ checkit("1.001", buf);
+
+ Gconvert((DOUBLETYPE)1.0001, 8, 0, buf);
+ checkit("1.0001", buf);
+
+ Gconvert((DOUBLETYPE)1.00001, 8, 0, buf);
+ checkit("1.00001", buf);
+
+ Gconvert((DOUBLETYPE)1.000001, 8, 0, buf);
+ checkit("1.000001", buf);
+
+ Gconvert((DOUBLETYPE)0.0, 8, 0, buf);
+ checkit("0", buf);
+
+ Gconvert((DOUBLETYPE)-1.0, 8, 0, buf);
+ checkit("-1", buf);
+
+ /* Some Linux gcvt's give 1.e+5 here. */
+ Gconvert((DOUBLETYPE)100000.0, 8, 0, buf);
+ checkit("100000", buf);
+
+ /* Some Linux gcvt's give -1.e+5 here. */
+ Gconvert((DOUBLETYPE)-100000.0, 8, 0, buf);
+ checkit("-100000", buf);
+
+ Gconvert((DOUBLETYPE)123.456, 8, 0, buf);
+ checkit("123.456", buf);
+
+ exit(0);
+}
+EOP
+case "$d_Gconvert" in
+gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+*) xxx_list='gconvert gcvt sprintf' ;;
+esac
+
+case "$d_longdbl$uselongdouble$d_PRIgldbl" in
+"$define$define$define")
+ # for long doubles prefer first qgcvt, then sprintf
+ xxx_list="`echo $xxx_list|sed s/sprintf//`"
+ xxx_list="sprintf $xxx_list"
+ case "$d_qgcvt" in
+ "$define") xxx_list="qgcvt $xxx_list" ;;
+ esac
+ ;;
+esac
+
+for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert..."
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert() found." >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
+ else
+ echo "...But $xxx_convert didn't work as I expected."
+ fi
+ else
+ echo "$xxx_convert NOT found." >&4
+ fi
+done
+
+case "$xxx_convert" in
+gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+qgcvt) d_Gconvert='qgcvt((x),(n),(b))' ;;
+*) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
+ "$define$define$define")
+ d_Gconvert="sprintf((b),\"%.*\"$sPRIgldbl,(n),(x))" ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+ ;;
+esac
+
: Initialize h_fcntl
h_fcntl=false
EOCP
: check sys/file.h first, no particular reason here
if $test `./findhdr sys/file.h` && \
- $cc $cppflags -DI_SYS_FILE -o access access.c >/dev/null 2>&1 ; then
+ $cc -o access $cppflags -DI_SYS_FILE access.c >/dev/null 2>&1 ; then
h_sysfile=true;
echo "<sys/file.h> defines the *_OK access constants." >&4
elif $test `./findhdr fcntl.h` && \
- $cc $cppflags -DI_FCNTL -o access access.c >/dev/null 2>&1 ; then
+ $cc -o access $cppflags -DI_FCNTL access.c >/dev/null 2>&1 ; then
h_fcntl=true;
echo "<fcntl.h> defines the *_OK access constants." >&4
elif $test `./findhdr unistd.h` && \
- $cc $cppflags -DI_UNISTD -o access access.c >/dev/null 2>&1 ; then
+ $cc -o access $cppflags -DI_UNISTD access.c >/dev/null 2>&1 ; then
echo "<unistd.h> defines the *_OK access constants." >&4
else
echo "I can't find the four *_OK access constants--I'll use mine." >&4
exit(1);
}
EOP
- if $cc -DTRY_BSD_PGRP $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ if $cc -o set -DTRY_BSD_PGRP $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo "You have to use getpgrp(pid) instead of getpgrp()." >&4
val="$define"
- elif $cc $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ elif $cc -o set $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo "You have to use getpgrp() instead of getpgrp(pid)." >&4
val="$undef"
else
exit(1);
}
EOP
- if $cc -DTRY_BSD_PGRP $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ if $cc -o set -DTRY_BSD_PGRP $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo 'You have to use setpgrp(pid,pgrp) instead of setpgrp().' >&4
val="$define"
- elif $cc $ccflags $ldflags -o set set.c $libs >/dev/null 2>&1 && ./set; then
+ elif $cc -o set $ccflags $ldflags set.c $libs >/dev/null 2>&1 && ./set; then
echo 'You have to use setpgrp() instead of setpgrp(pid,pgrp).' >&4
val="$undef"
else
: Call the object file tmp-dyna.o in case dlext=o.
if $cc $ccflags $cccdlflags -c dyna.c > /dev/null 2>&1 &&
mv dyna${_o} tmp-dyna${_o} > /dev/null 2>&1 &&
- $ld $lddlflags -o dyna.$dlext tmp-dyna${_o} > /dev/null 2>&1 &&
- $cc $ccflags -o fred $ldflags $cccdlflags $ccdlflags fred.c $libs > /dev/null 2>&1; then
+ $ld -o dyna.$dlext $lddlflags tmp-dyna${_o} > /dev/null 2>&1 &&
+ $cc -o fred $ccflags $ldflags $cccdlflags $ccdlflags fred.c $libs > /dev/null 2>&1; then
xxx=`./fred`
case $xxx in
1) echo "Test program failed using dlopen." >&4
set endservent d_endsent
eval $inlibc
-: see if endspent exists
-set endspent d_endspent
-eval $inlibc
-
: Locate the flags for 'open()'
echo " "
$cat >open3.c <<'EOCP'
#ifdef I_UNISTD
#include <unistd.h>
#endif
-#ifdef $i_string
+#$i_string I_STRING
+#ifdef I_STRING
#include <string.h>
#else
#include <strings.h>
eval $inlibc
-: check for off64_t
-echo " "
-echo "Checking to see if your system supports off64_t..." >&4
-$cat >try.c <<EOCP
-#include <sys/types.h>
-#include <unistd.h>
-int main() { off64_t x = 7; }'
-EOCP
-set try
-if eval $compile; then
- val="$define"
- echo "Yes, it does."
-else
- val="$undef"
- echo "No, it doesn't."
- case "$lseeksize" in
- 8) echo "(Your off_t is 64 bits, so you could use that.)" ;;
- esac
-fi
-$rm -f try.* try
-set d_off64_t
-eval $setvar
-
: check for fpos64_t
echo " "
-echo "Checking to see if your system supports fpos64_t..." >&4
+echo "Checking to see if you have fpos64_t..." >&4
$cat >try.c <<EOCP
-#include <sys/stdio.h>
-int main() { fpos64_t x x = 7; }'
+#include <stdio.h>
+int main() { fpos64_t x = 7; }
EOCP
set try
if eval $compile; then
val="$define"
- echo "Yes, it does."
+ echo "You have fpos64_t."
else
val="$undef"
- echo "No, it doesn't."
+ echo "You do not have fpos64_t."
case "$fpossize" in
8) echo "(Your fpos_t is 64 bits, so you could use that.)" ;;
esac
set d_fpos64_t
eval $setvar
+: see if frexpl exists
+set frexpl d_frexpl
+eval $inlibc
+
hasstruct='varname=$1; struct=$2; shift; shift;
while $test $# -ge 2; do
case "$1" in
set getcwd d_getcwd
eval $inlibc
+: see if getespwnam exists
+set getespwnam d_getespwnam
+eval $inlibc
+
+
+: see if getfsstat exists
+set getfsstat d_getfsstat
+eval $inlibc
+
: see if getgrent exists
set getgrent d_getgrent
eval $inlibc
set d_getprotoprotos getprotoent $i_netdb netdb.h
eval $hasproto
+: see if getprpwnam exists
+set getprpwnam d_getprpwnam
+eval $inlibc
+
: see if getpwent exists
set getpwent d_getpwent
eval $inlibc
set d_getservprotos getservent $i_netdb netdb.h
eval $hasproto
-: see if getspent exists
-set getspent d_getspent
-eval $inlibc
-
: see if getspnam exists
set getspnam d_getspnam
eval $inlibc
: check for int64_t
echo " "
-$echo $n "Checking to see if your system supports int64_t...$c" >&4
+echo "Checking to see if you have int64_t..." >&4
$cat >try.c <<EOCP
#include <sys/types.h>
#$i_inttypes I_INTTYPES
set try
if eval $compile; then
val="$define"
- echo " Yes, it does." >&4
+ echo "You have int64_t."
else
val="$undef"
- echo " No, it doesn't." >&4
+ echo "You do not have int64_t."
fi
$rm -f try try.*
-set d_int64t
+set d_int64_t
eval $setvar
: Look for isascii
eval $setvar
$rm -f isascii*
+: see if isnan exists
+set isnan d_isnan
+eval $inlibc
+
+: see if isnanl exists
+set isnanl d_isnanl
+eval $inlibc
+
: see if killpg exists
set killpg d_killpg
eval $inlibc
: check for long long
echo " "
-$echo $n "Checking to see if your system supports long long..." $c >&4
+echo "Checking to see if you have long long..." >&4
echo 'int main() { long long x = 7; return 0; }' > try.c
set try
if eval $compile; then
val="$define"
- echo " Yes, it does." >&4
+ echo "You have long long."
else
val="$undef"
- echo " No, it doesn't." >&4
+ echo "You do not have long long."
fi
$rm try.*
set d_longlong
case "${d_longlong}${longlongsize}" in
$define)
echo " "
- $echo $n "Checking to see how big your long longs are..." $c >&4
+ echo "Checking to see how big your long longs are..." >&4
$cat >try.c <<'EOCP'
#include <stdio.h>
int main()
set try
if eval $compile_ok; then
longlongsize=`./try$exe_ext`
- $echo " $longlongsize bytes." >&4
+ echo "Your long longs are $longlongsize bytes long."
else
dflt='8'
echo " "
esac
$rm -f try.* try
+: see if prototype for lseek is available
+echo " "
+set d_lseekproto lseek $i_systypes sys/types.h $i_unistd unistd.h
+eval $hasproto
+
: see if lstat exists
set lstat d_lstat
eval $inlibc
+: see if madvise exists
+set madvise d_madvise
+eval $inlibc
+
: see if mblen exists
set mblen d_mblen
eval $inlibc
set mktime d_mktime
eval $inlibc
+: see if this is a sys/mman.h system
+set sys/mman.h i_sysmman
+eval $inhdr
+
+: see if mmap exists
+set mmap d_mmap
+eval $inlibc
+: see what shmat returns
+: default to something harmless
+mmaptype='void *'
+case "$i_sysmman$d_mmap" in
+"$define$define")
+ $cat >mmap.c <<'END'
+#include <sys/mman.h>
+void *mmap();
+END
+ if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
+ mmaptype='void *'
+ else
+ mmaptype='caddr_t'
+ fi
+ echo "and it returns ($mmaptype)." >&4
+ ;;
+esac
+
+
+
+: see if modfl exists
+set modfl d_modfl
+eval $inlibc
+
: see if mprotect exists
set mprotect d_mprotect
eval $inlibc
eval $setvar
quadkind=3
;;
- *) case "$d_int64t" in
+ *) case "$d_int64_t" in
define)
val=int64_t
set quadtype
'') echo "Alas, no 64-bit integer types in sight." >&4
d_quad="$undef"
;;
-*) if test X"$use64bits" = Xdefine -o X"$longsize" = X8; then
+*) if test X"$use64bitint" = Xdefine -o X"$longsize" = X8; then
verb="will"
else
verb="could"
echo " "
$echo "Choosing the C types to be used for Perl's internal types..." >&4
-case "$use64bits:$d_quad:$quadtype" in
+case "$use64bitint:$d_quad:$quadtype" in
define:define:?*)
ivtype="$quadtype"
uvtype="$uquadtype"
$rm -f try.* try
+case "$d_nv_preserves_uv" in
+"$define") d_nv_preserves_uv_bits=`expr $uvsize \* 8` ;;
+*) $echo "Checking how many bits of your UVs your NVs can preserve..." >&4
+ $cat <<EOP >try.c
+#include <stdio.h>
+int main() {
+ $uvtype u = 0;
+ int n = 8 * $uvsize;
+ int i;
+ for (i = 0; i < n; i++) {
+ u = u << 1 | ($uvtype)1;
+ if (($uvtype)($nvtype)u != u)
+ break;
+ }
+ printf("%d\n", i);
+ exit(0);
+}
+EOP
+ set try
+ if eval $compile; then
+ d_nv_preserves_uv_bits="`./try$exe_ext`"
+ fi
+ case "$d_nv_preserves_uv_bits" in
+ [1-9]*) $echo "Your NVs can preserve $d_nv_preserves_uv_bits bits of your UVs." 2>&1 ;;
+ *) $echo "Can't figure out how many bits your NVs preserve." 2>&1
+ d_nv_preserves_uv_bits="$undef"
+ ;;
+ esac
+ $rm -f try.* try
+ ;;
+esac
+
+
+: check for off64_t
+echo " "
+echo "Checking to see if you have off64_t..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <unistd.h>
+int main() { off64_t x = 7; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have off64_t."
+else
+ val="$undef"
+ echo "You do not have off64_t."
+ case "$lseeksize" in
+ 8) echo "(Your off_t is 64 bits, so you could use that.)" ;;
+ esac
+fi
+$rm -f try.* try
+set d_off64_t
+eval $setvar
+
: see if POSIX threads are available
set pthread.h i_pthread
eval $inhdr
set setpriority d_setprior
eval $inlibc
+: see if setproctitle exists
+set setproctitle d_setproctitle
+eval $inlibc
+
: see if setpwent exists
set setpwent d_setpwent
eval $inlibc
set setsid d_setsid
eval $inlibc
-: see if setspent exists
-set setspent d_setspent
-eval $inlibc
-
: see if setvbuf exists
set setvbuf d_setvbuf
eval $inlibc
*) dflt='n';;
esac
echo "$package can use the sfio library, but it is experimental."
+ case "$useperlio" in
+ "$undef")
+ echo "For sfio also the PerlIO abstraction layer is needed."
+ echo "Earlier you said you wouldn't want that."
+ ;;
+ esac
rp="You seem to have sfio available, do you want to try using it?"
. ./myread
case "$ans" in
- y|Y) ;;
+ y|Y) echo "Ok, turning on both sfio and PerlIO, then."
+ useperlio="$define"
+ val="$define"
+ ;;
*) echo "Ok, avoiding sfio this time. I'll use stdio instead."
val="$undef"
: Remove sfio from list of libraries to use
;;
*) case "$usesfio" in
true|$define|[yY]*)
- echo "Sorry, cannot find sfio on this machine" >&4
- echo "Ignoring your setting of usesfio=$usesfio" >&4
+ echo "Sorry, cannot find sfio on this machine." >&4
+ echo "Ignoring your setting of usesfio=$usesfio." >&4
+ val="$undef"
;;
esac
;;
eval $setvar
$rm -f try.c try
+: see if socks5_init exists
+set socks5_init d_socks5_init
+eval $inlibc
+
: see if sys/stat.h is available
set sys/stat.h i_sysstat
eval $inhdr
set d_stdio_cnt_lval
eval $setvar
+
+: test whether setting _ptr sets _cnt as a side effect
+d_stdio_ptr_lval_sets_cnt="$undef"
+d_stdio_ptr_lval_nochange_cnt="$undef"
+case "$d_stdio_ptr_lval$d_stdstdio" in
+$define$define)
+ echo "Checking to see what happens if we set the stdio ptr..." >&4
+$cat >try.c <<EOP
+#include <stdio.h>
+/* Can we scream? */
+/* Eat dust sed :-) */
+#define FILE_ptr(fp) $stdio_ptr
+#define FILE_cnt(fp) $stdio_cnt
+int main() {
+ FILE *fp = fopen("try.c", "r");
+ char c = getc(fp);
+ char *ptr;
+ size_t cnt;
+ if (!(
+ 18 <= FILE_cnt(fp) &&
+ strncmp(FILE_ptr(fp), "include <stdio.h>\n", 18) == 0
+ )) {
+ puts("Fail even to read");
+ exit (1);
+ }
+ ptr = FILE_ptr(fp);
+ cnt = FILE_cnt(fp);
+
+ FILE_ptr(fp)+= 42;
+
+ if (FILE_ptr(fp) != (ptr + 42)) {
+ printf("Fail ptr check %p != %p", FILE_ptr(fp), (ptr + 42));
+ exit (1);
+ }
+ if (FILE_cnt(fp) <= 20) {
+ printf ("Fail (<20 chars to test)");
+ exit (1);
+ }
+ if (strncmp(FILE_ptr(fp), "Eat dust sed :-) */\n", 20) != 0) {
+ puts("Fail compare");
+ exit (1);
+ }
+ if (cnt == FILE_cnt(fp)) {
+ puts("Pass_unchanged");
+ exit (0);
+ }
+ if (FILE_cnt(fp) == (cnt - 42)) {
+ puts("Pass_changed");
+ exit (0);
+ }
+ printf("Fail count was %d now %d\n", cnt, FILE_cnt(fp));
+ return 1;
+
+}
+EOP
+ set try
+ if eval $compile; then
+ case `./try$exe_ext` in
+ Pass_changed)
+ echo "Increasing ptr in your stdio decreases cnt by the same amount. Good." >&4
+ d_stdio_ptr_lval_sets_cnt="$define" ;;
+ Pass_unchanged)
+ echo "Increasing ptr in your stdio leaves cnt unchanged. Good." >&4
+ d_stdio_ptr_lval_nochange_cnt="$define" ;;
+ Fail*)
+ echo "Increasing ptr in your stdio didn't do exactly what I expected. We'll not be doing that then." >&4 ;;
+ *)
+ echo "It appears attempting to set ptr in your stdio is a bad plan." >&4 ;;
+ esac
+ else
+ echo "It seems we can't set ptr in your stdio. Nevermind." >&4
+ fi
+ $rm -f try.c try
+ ;;
+esac
+
: see if _base is also standard
val="$undef"
case "$d_stdstdio" in
set strtoll d_strtoll
eval $inlibc
+case "$d_longlong-$d_strtoll" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your strtoll() works okay...
+EOM
+ $cat >try.c <<'EOCP'
+#include <errno.h>
+#ifdef __hpux
+#define strtoll __strtoll
+#endif
+#ifdef __EMX__
+#define strtoll _strtoll
+#endif
+#include <stdio.h>
+extern long long int strtoll(char *s, char **, int);
+static int bad = 0;
+int check(char *s, long long ell, int een) {
+ long long gll;
+ errno = 0;
+ gll = strtoll(s, 0, 10);
+ if (!((gll == ell) && (errno == een)))
+ bad++;
+}
+int main() {
+ check(" 1", 1LL, 0);
+ check(" 0", 0LL, 0);
+ check("-1", -1LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check(" 9223372036854775807", 9223372036854775807LL, 0);
+ check("-9223372036854775808", -9223372036854775808LL, 0);
+ check(" 9223372036854775808", 9223372036854775807LL, ERANGE);
+ check("-9223372036854775809", -9223372036854775808LL, ERANGE);
+ if (!bad)
+ printf("ok\n");
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`./try`
+ case "$yyy" in
+ ok) echo "Your strtoll() seems to be working okay." ;;
+ *) cat <<EOM >&4
+Your strtoll() doesn't seem to be working okay.
+EOM
+ d_strtoll="$undef"
+ ;;
+ esac
+ else
+ echo "(I can't seem to compile the test program--assuming it doesn't)"
+ d_strtoll="$undef"
+ fi
+ ;;
+esac
+
: see if strtoul exists
set strtoul d_strtoul
eval $inlibc
set strtoull d_strtoull
eval $inlibc
+case "$d_longlong-$d_strtoull" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your strtoull() works okay...
+EOM
+ $cat >try.c <<'EOCP'
+#include <errno.h>
+#ifdef __hpux
+#define strtoull __strtoull
+#endif
+#include <stdio.h>
+extern unsigned long long int strtoull(char *s, char **, int);
+static int bad = 0;
+int check(char *s, long long eull, int een) {
+ long long gull;
+ errno = 0;
+ gull = strtoull(s, 0, 10);
+ if (!((gull == eull) && (errno == een)))
+ bad++;
+}
+int main() {
+ check(" 1", 1LL, 0);
+ check(" 0", 0LL, 0);
+ check("18446744073709551615", 18446744073709551615ULL, 0);
+ check("18446744073709551616", 18446744073709551615ULL, ERANGE);
+ if (!bad)
+ printf("ok\n");
+}
+EOCP
+ set try
+ if eval $compile; then
+ case "`./try`" in
+ ok) echo "Your strtoull() seems to be working okay." ;;
+ *) cat <<EOM >&4
+Your strtoull() doesn't seem to be working okay.
+EOM
+ d_strtoull="$undef"
+ ;;
+ esac
+ fi
+ ;;
+esac
+
: see if strtouq exists
set strtouq d_strtouq
eval $inlibc
esac
case "$osname" in
-next|rhapsody) multiarch="$define" ;;
+next|rhapsody|darwin) multiarch="$define" ;;
esac
case "$multiarch" in
''|[nN]*) multiarch="$undef" ;;
*)
case "$alignbytes" in
'') echo "Checking alignment constraints..." >&4
- $cat >try.c <<'EOCP'
+ if $test "X$uselongdouble" = Xdefine -a "X$d_longdbl" = Xdefine; then
+ $cat >try.c <<'EOCP'
+typedef long double NV;
+EOCP
+ else
+ $cat >try.c <<'EOCP'
+typedef double NV;
+EOCP
+ fi
+ $cat >>try.c <<'EOCP'
#include <stdio.h>
struct foobar {
char foo;
- double bar;
+ NV bar;
} try_algn;
int main()
{
esac
+: set the base revision
+baserev=5.0
+
: check for ordering of bytes in a long
echo " "
case "$crosscompile$multiarch" in
set tebcdic
if eval $compile_ok; then
if ./tebcdic; then
- echo "You have EBCDIC." >&4
+ echo "You seem to speak EBCDIC." >&4
val="$define"
else
- echo "Nope, no EBCDIC, probably ASCII or some ISO Latin." >&4
+ echo "Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF8." >&4
fi
else
echo "I'm unable to compile the test program." >&4
- echo "I'll assume ASCII or some ISO Latin." >&4
+ echo "I'll assume ASCII or some ISO Latin. Or UTF8." >&4
fi
$rm -f tebcdic.c tebcdic
set ebcdic
$rm -f core try.core core.try.*
case "$fflushNULL" in
x) $cat >&4 <<EOM
-Your fflush(NULL) works okay.
+Your fflush(NULL) works okay for output streams.
+Let's see if it clobbers input pipes...
+EOM
+# As of mid-March 2000 all versions of Solaris appear to have a stdio
+# bug that improperly flushes the input end of pipes. So we avoid the
+# autoflush on fork/system/exec support for now. :-(
+$cat >tryp.c <<EOCP
+#include <stdio.h>
+int
+main(int argc, char **argv)
+{
+ char buf[1024];
+ int i;
+ char *bp = buf;
+ while (1) {
+ while ((i = getc(stdin)) != -1
+ && (*bp++ = i) != '\n'
+ && bp < &buf[1024])
+ /* DO NOTHING */ ;
+ *bp = '\0';
+ fprintf(stdout, "%s", buf);
+ fflush(NULL);
+ if (i == -1)
+ return 0;
+ bp = buf;
+ }
+}
+EOCP
+ fflushNULL="$define"
+ set tryp
+ if eval $compile; then
+ $rm -f tryp.out
+ $cat tryp.c | ./tryp$exe_ext 2>/dev/null > tryp.out
+ if cmp tryp.c tryp.out >/dev/null 2>&1; then
+ $cat >&4 <<EOM
+fflush(NULL) seems to behave okay with input streams.
+EOM
+ fflushNULL="$define"
+ else
+ $cat >&4 <<EOM
+Ouch, fflush(NULL) clobbers input pipes! We will not use it.
EOM
- fflushNULL="$define"
+ fflushNULL="$undef"
+ fi
+ fi
+ $rm -f core tryp.c tryp.core core.tryp.*
;;
'') $cat >&4 <<EOM
Your fflush(NULL) isn't working (contrary to ANSI C).
fflushNULL="$undef"
;;
esac
-: check explicit looping only if NULL did not work
+: check explicit looping only if NULL did not work, and if the pipe
+: bug does not show up on an explicit flush too
case "$fflushNULL" in
"$undef")
- : check for fflush all behaviour
- case "$fflushall" in
- '') set try -DTRY_FFLUSH_ALL $output
- if eval $compile; then
- $cat >&4 <<EOM
-(Now testing the other method--but note that also this may fail.)
+ $cat >tryp.c <<EOCP
+#include <stdio.h>
+int
+main(int argc, char **argv)
+{
+ char buf[1024];
+ int i;
+ char *bp = buf;
+ while (1) {
+ while ((i = getc(stdin)) != -1
+ && (*bp++ = i) != '\n'
+ && bp < &buf[1024])
+ /* DO NOTHING */ ;
+ *bp = '\0';
+ fprintf(stdout, "%s", buf);
+ fflush(stdin);
+ if (i == -1)
+ return 0;
+ bp = buf;
+ }
+}
+EOCP
+ set tryp
+ if eval $compile; then
+ $rm -f tryp.out
+ $cat tryp.c | ./tryp$exe_ext 2>/dev/null > tryp.out
+ if cmp tryp.c tryp.out >/dev/null 2>&1; then
+ $cat >&4 <<EOM
+Good, at least fflush(stdin) seems to behave okay when stdin is a pipe.
EOM
- $rm -f try.out
- ./try$exe_ext 2>/dev/null
- if $test -s try.out -a "X$?" = X42; then
- fflushall="`$cat try.out`"
- fi
- fi
- $rm -f core try.core core.try.*
+ : now check for fflushall behaviour
case "$fflushall" in
- x) $cat >&4 <<EOM
+ '') set try -DTRY_FFLUSH_ALL $output
+ if eval $compile; then
+ $cat >&4 <<EOM
+(Now testing the other method--but note that this also may fail.)
+EOM
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test -s try.out -a "X$?" = X42; then
+ fflushall="`$cat try.out`"
+ fi
+ fi
+ $rm -f core try.core core.try.*
+ case "$fflushall" in
+ x) $cat >&4 <<EOM
Whew. Flushing explicitly all the stdio streams works.
EOM
- fflushall="$define"
- ;;
- '') $cat >&4 <<EOM
+ fflushall="$define"
+ ;;
+ '') $cat >&4 <<EOM
Sigh. Flushing explicitly all the stdio streams doesn't work.
EOM
- fflushall="$undef"
- ;;
- *) $cat >&4 <<EOM
+ fflushall="$undef"
+ ;;
+ *) $cat >&4 <<EOM
Cannot figure out whether flushing stdio streams explicitly works or not.
I'm assuming it doesn't.
EOM
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+ "$define"|true|[yY]*)
+ fflushall="$define"
+ ;;
+ *)
fflushall="$undef"
;;
esac
- ;;
- "$define"|true|[yY]*)
- fflushall="$define"
- ;;
- *)
+ else
+ $cat >&4 <<EOM
+All is futile. Even fflush(stdin) clobbers input pipes!
+EOM
fflushall="$undef"
- ;;
- esac
+ fi
+ else
+ fflushall="$undef"
+ fi
+ $rm -f core tryp.c tryp.core core.tryp.*
;;
-*) fflushall="$undef"
+*) fflushall="$undef"
;;
esac
+
case "$fflushNULL$fflushall" in
undefundef)
$cat <<EOM
-I cannot figure out how to flush pending stdio output.
+OK, I give up. I cannot figure out how to flush pending stdio output.
+We won't be flushing handles at all before fork/exec/popen.
EOM
;;
esac
echo "(I can't execute the test program--guessing $gidsize.)" >&4
;;
*) gidsize=$yyy
- echo "Your $zzz size is $gidsize bytes."
+ echo "Your $zzz is $gidsize bytes long."
;;
esac
else
case "$yyy" in
12345678901)
sPRId64='"d"'; sPRIi64='"i"'; sPRIu64='"u"';
- sPRIo64='"o"'; sPRIx64='"x"'; sPRIX64='"X"';
+ sPRIo64='"o"'; sPRIx64='"x"'; sPRIXU64='"X"';
echo "We will use %d."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"ld"'; sPRIi64='"li"'; sPRIu64='"lu"';
- sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIX64='"lX"';
+ sPRIo64='"lo"'; sPRIx64='"lx"'; sPRIXU64='"lX"';
echo "We will use %ld."
;;
esac
case "$yyy" in
12345678901)
sPRId64=PRId64; sPRIi64=PRIi64; sPRIu64=PRIu64;
- sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIX64=PRIX64;
+ sPRIo64=PRIo64; sPRIx64=PRIx64; sPRIXU64=PRIXU64;
echo "We will use the C9X style."
;;
esac
#include <sys/types.h>
#include <stdio.h>
int main() {
- long long q = 12345678901LL; /* AIX cc requires the LL prefix. */
+ long long q = 12345678901LL; /* AIX cc requires the LL suffix. */
printf("%lld\n", q);
}
EOCP
case "$yyy" in
12345678901)
sPRId64='"lld"'; sPRIi64='"lli"'; sPRIu64='"llu"';
- sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIX64='"llX"';
+ sPRIo64='"llo"'; sPRIx64='"llx"'; sPRIXU64='"llX"';
echo "We will use the %lld style."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"Ld"'; sPRIi64='"Li"'; sPRIu64='"Lu"';
- sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIX64='"LX"';
+ sPRIo64='"Lo"'; sPRIx64='"Lx"'; sPRIXU64='"LX"';
echo "We will use %Ld."
;;
esac
case "$yyy" in
12345678901)
sPRId64='"qd"'; sPRIi64='"qi"'; sPRIu64='"qu"';
- sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIX64='"qX"';
+ sPRIo64='"qo"'; sPRIx64='"qx"'; sPRIXU64='"qX"';
echo "We will use %qd."
;;
esac
case "$sPRId64" in
'') d_PRId64="$undef"; d_PRIi64="$undef"; d_PRIu64="$undef";
- d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIX64="$undef";
+ d_PRIo64="$undef"; d_PRIx64="$undef"; d_PRIXU64="$undef";
;;
*) d_PRId64="$define"; d_PRIi64="$define"; d_PRIu64="$define";
- d_PRIo64="$define"; d_PRIx64="$define"; d_PRIX64="$define";
+ d_PRIo64="$define"; d_PRIx64="$define"; d_PRIXU64="$define";
;;
esac
uvuformat="$sPRIu64"
uvoformat="$sPRIo64"
uvxformat="$sPRIx64"
+ uvXUformat="$sPRIXU64"
else
if $test X"$ivsize" = X"$longsize"; then
ivdformat='"ld"'
uvuformat='"lu"'
uvoformat='"lo"'
uvxformat='"lx"'
+ uvXUformat='"lX"'
else
if $test X"$ivsize" = X"$intsize"; then
ivdformat='"d"'
uvuformat='"u"'
uvoformat='"o"'
uvxformat='"x"'
+ uvXUformat='"X"'
else
: far out
if $test X"$ivsize" = X"$shortsize"; then
uvuformat='"hu"'
uvoformat='"ho"'
uvxformat='"hx"'
+ uvXUformat='"hX"'
fi
fi
fi
fi
+if $test X"$uselongdouble" = X"$define" -a X"$d_longdbl" = X"$define" -a X"$d_PRIgldbl" = X"$define"; then
+ nveformat="$sPRIeldbl"
+ nvfformat="$sPRIfldbl"
+ nvgformat="$sPRIgldbl"
+ nvEUformat="$sPRIEUldbl"
+ nvFUformat="$sPRIFUldbl"
+ nvGUformat="$sPRIGUldbl"
+else
+ nveformat='"e"'
+ nvfformat='"f"'
+ nvgformat='"g"'
+ nvEUformat='"E"'
+ nvFUformat='"F"'
+ nvGUformat='"G"'
+fi
+
case "$ivdformat" in
'') echo "$0: Fatal: failed to find format strings, cannot continue." >& 4
exit 1
*) echo "Nope, it doesn't.";;
esac
-: see if this is a sys/mman.h system
-set sys/mman.h i_sysmman
-eval $inhdr
-
-: see if mmap exists
-set mmap d_mmap
-eval $inlibc
-: see what shmat returns
-: default to something harmless
-mmaptype='void *'
-case "$i_sysmman$d_mmap" in
-"$define$define")
- $cat >mmap.c <<'END'
-#include <sys/mman.h>
-void *mmap();
-END
- if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
- mmaptype='void *'
- else
- mmaptype='caddr_t'
- fi
- echo "and it returns ($mmaptype)." >&4
- ;;
-esac
-
-
-
: see what type is used for mode_t
rp="What is the type used for file modes for system calls (e.g. fchmod())?"
set mode_t modetype int stdio.h sys/types.h
dflt=''
case "$pg" in
/*) dflt=$pg;;
+ [a-zA-Z]:/*) dflt=$pg;;
esac
case "$more" in
/*) dflt=$more;;
+ [a-zA-Z]:/*) dflt=$more;;
esac
case "$less" in
/*) dflt=$less;;
+ [a-zA-Z]:/*) dflt=$less;;
esac
case "$dflt" in
'') dflt=/usr/ucb/more;;
echo " "
case "$ptrsize" in
'')
- $echo $n "Checking to see how big your pointers are...$c" >&4
+ echo "Checking to see how big your pointers are..." >&4
if test "$voidflags" -gt 7; then
echo '#define VOID_PTR char *' > try.c
else
set try
if eval $compile_ok; then
ptrsize=`./try`
- $echo " $ptrsize bytes." >&4
+ echo "Your pointers are $ptrsize bytes long."
else
dflt='4'
echo "(I can't seem to compile the test program. Guessing...)" >&4
$cc $ccflags -c bar2.c >/dev/null 2>&1
$cc $ccflags -c foo.c >/dev/null 2>&1
$ar rc bar$_a bar2$_o bar1$_o >/dev/null 2>&1
-if $cc $ccflags $ldflags -o foobar foo$_o bar$_a $libs > /dev/null 2>&1 &&
+if $cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "$ar appears to generate random libraries itself."
orderlib=false
ranlib=":"
elif $ar ts bar$_a >/dev/null 2>&1 &&
- $cc $ccflags $ldflags -o foobar foo$_o bar$_a $libs > /dev/null 2>&1 &&
+ $cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
./foobar >/dev/null 2>&1; then
echo "a table of contents needs to be added with '$ar ts'."
orderlib=false
}'
$rm -f signal signal.c signal.awk signal.lst signal_cmd
+echo " "
+case "$sizetype" in
+*_t) zzz="$sizetype" ;;
+*) zzz="filesize" ;;
+esac
+echo "Checking the size of $zzz..." >&4
+cat > try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ printf("%d\n", (int)sizeof($sizetype));
+ exit(0);
+}
+EOCP
+set try
+if eval $compile_ok; then
+ yyy=`./try`
+ case "$yyy" in
+ '') sizesize=4
+ echo "(I can't execute the test program--guessing $sizesize.)" >&4
+ ;;
+ *) sizesize=$yyy
+ echo "Your $zzz size is $sizesize bytes."
+ ;;
+ esac
+else
+ sizesize=4
+ echo "(I can't compile the test program--guessing $sizesize.)" >&4
+fi
+
+
+: check for socklen_t
+echo " "
+echo "Checking to see if you have socklen_t..." >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#$d_socket HAS_SOCKET
+#ifdef HAS_SOCKET
+#include <sys/socket.h>
+#endif
+int main() { socklen_t x = 16; }
+EOCP
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have socklen_t."
+else
+ val="$undef"
+ echo "You do not have socklen_t."
+ case "$sizetype" in
+ size_t) echo "(You do have size_t, that might work. Some people are happy with just an int.)" ;;
+ esac
+fi
+$rm -f try try.*
+set d_socklen_t
+eval $setvar
+
+: check for type of the size argument to socket calls
+case "$d_socket" in
+"$define")
+ $cat <<EOM
+
+Checking to see what type is the last argument of accept().
+EOM
+ hdrs="$define sys/types.h $d_socket sys/socket.h"
+ yyy=''
+ case "$d_socklen_t" in
+ "$define") yyy="$yyy socklen_t"
+ esac
+ yyy="$yyy $sizetype int long unsigned"
+ for xxx in $yyy; do
+ case "$socksizetype" in
+ '') try="extern int accept(int, struct sockaddr *, $xxx *);"
+ if ./protochk "$try" $hdrs; then
+ echo "Your system accepts '$xxx *' for the last argument of accept()."
+ socksizetype="$xxx"
+ fi
+ ;;
+ esac
+ done
+: In case none of those worked, prompt the user.
+ case "$socksizetype" in
+ '') rp='What is the type for socket address structure sizes?'
+ dflt='int'
+ . ./myread
+ socksizetype=$ans
+ ;;
+ esac
+ ;;
+*) : no sockets, so pick relatively harmless default
+ socksizetype='int'
+ ;;
+esac
+
: see what type is used for signed size_t
set ssize_t ssizetype int stdio.h sys/types.h
eval $typedef
echo "(I can't execute the test program--guessing $uidsize.)" >&4
;;
*) uidsize=$yyy
- echo "Your $zzz size is $uidsize bytes."
+ echo "Your $zzz is $uidsize bytes long."
;;
esac
else
set iconv.h i_iconv
eval $inhdr
+: see if this is a ieeefp.h system
+set ieeefp.h i_ieeefp
+eval $inhdr
+
+: see if this is a libutil.h system
+set libutil.h i_libutil
+eval $inhdr
+
: see if locale.h is available
set locale.h i_locale
eval $inhdr
set poll.h i_poll
eval $inhdr
+: see if this is a prot.h system
+set prot.h i_prot
+eval $inhdr
+
echo " "
$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
$cat <<'EOSH' > Cppsym.know
MIPS_SZLONG MIPS_SZPTR MIPSEB MIPSEL MODERN_C motorola
mpeix MSDOS MTXINU MULTIMAX mvs MVS n16 ncl_el ncl_mr
NetBSD news1500 news1700 news1800 news1900 news3700
-news700 news800 news900 NeXT NLS ns16000 ns32000
+news700 news800 news900 NeXT NLS nonstopux ns16000 ns32000
ns32016 ns32332 ns32k nsc32000
OCS88 OEMVS OpenBSD os OS2 OS390 osf OSF1 OSF_SOURCE
pa_risc PA_RISC1_1 PA_RISC2_0 PARAGON parisc
EOSH
./tr '[a-z]' '[A-Z]' < Cppsym.know > Cppsym.a
./tr '[A-Z]' '[a-z]' < Cppsym.know > Cppsym.b
-$cat Cppsym.a Cppsym.b | $tr ' ' $trnl | sort | uniq > Cppsym.know
-$rm -f Cppsym.a Cppsym.b
+$cat Cppsym.know > Cppsym.c
+$cat Cppsym.a Cppsym.b Cppsym.c | $tr ' ' $trnl | sort | uniq > Cppsym.know
+$rm -f Cppsym.a Cppsym.b Cppsym.c
cat <<EOSH > Cppsym
$startsh
if $test \$# -gt 0; then
echo '}' >> try.c
EOSH
cat <<EOSH >> Cppsym.try
-cc="$cc"
-optimize="$optimize"
ccflags="$ccflags"
-ldflags="$ldflags"
-libs="$libs"
-exe_ext="$exe_ext"
-$cc $optimize $ccflags $ldflags -o try try.c $libs && ./try$exe_ext
+case "$osname-$gccversion" in
+irix-) ccflags="\$ccflags -woff 1178" ;;
+os2-*) ccflags="\$ccflags -Zlinker /PM:VIO" ;;
+esac
+$cc -o try $optimize \$ccflags $ldflags try.c $libs && ./try$exe_ext
EOSH
chmod +x Cppsym.try
$eunicefix Cppsym.try
else
if $test -s ccsym.com; then
echo "Your C compiler and pre-processor define these symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.com
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.com
also='also '
symbols='ones'
cppccsymbols=`$cat ccsym.com`
if $test -s ccsym.cpp; then
$test "$also" && echo " "
echo "Your C pre-processor ${also}defines the following symbols:"
- $sed -e 's/\(.*\)=.*/\1/' ccsym.cpp
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.cpp
also='further '
cppsymbols=`$cat ccsym.cpp`
cppsymbols=`echo $cppsymbols`
if $test -s ccsym.own; then
$test "$also" && echo " "
echo "Your C compiler ${also}defines the following cpp symbols:"
- $sed -e 's/\(.*\)=1/\1/' ccsym.own
- $sed -e 's/\(.*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
+ $sed -e 's/\(..*\)=1/\1/' ccsym.own
+ $sed -e 's/\(..*\)=.*/\1/' ccsym.own | $uniq >>Cppsym.true
ccsymbols=`$cat ccsym.own`
ccsymbols=`echo $ccsymbols`
$test "$silent" || sleep 1
fi
fi
-$rm -f ccsym*
+$rm -f ccsym* Cppsym.*
: see if this is a termio system
val="$undef"
set stddef.h i_stddef
eval $inhdr
+: see if this is a sunmath.h system
+set sunmath.h i_sunmath
+eval $inhdr
+
: see if sys/access.h is available
set sys/access.h i_sysaccess
eval $inhdr
set syslog.h i_syslog
eval $inhdr
+
+: see if this is a sys/mode.h system
+set sys/mode.h i_sysmode
+eval $inhdr
+
: see if sys/resource.h has to be included
set sys/resource.h i_sysresrc
eval $inhdr
set sys/un.h i_sysun
eval $inhdr
+
+: see if this is a sys/utsname.h system
+set sys/utsname.h i_sysutsname
+eval $inhdr
+
: see if this is a syswait system
set sys/wait.h i_syswait
eval $inhdr
;;
NDBM_File|ndbm_fil)
case "$i_ndbm" in
- $define) avail_ext="$avail_ext $xxx" ;;
+ $define)
+ case "$osname-$use64bitint" in
+ hpux-define)
+ case "$libs" in
+ *-lndbm*) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ *) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
esac
;;
ODBM_File|odbm_fil)
case "${i_dbm}${i_rpcsvcdbm}" in
- *"${define}"*) avail_ext="$avail_ext $xxx" ;;
+ *"${define}"*)
+ case "$osname-$use64bitint" in
+ hpux-define)
+ case "$libs" in
+ *-ldbm*) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ *) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
esac
;;
POSIX|posix)
true|$define|y) avail_ext="$avail_ext $xxx" ;;
esac
;;
+ Sys/Syslog|sys/syslog)
+ : XXX syslog requires socket
+ case "$d_socket" in
+ true|$define|y) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
Thread|thread)
case "$usethreads" in
true|$define|y) avail_ext="$avail_ext $xxx" ;;
shift
extensions="$*"
+: Remove libraries needed only for extensions
+: The appropriate ext/Foo/Makefile.PL will add them back in, if necessary.
+: The exception is SunOS 4.x, which needs them.
+case "${osname}X${osvers}" in
+sunos*X4*)
+ perllibs="$libs"
+ ;;
+*) case "$usedl" in
+ $define|true|[yY]*)
+ set X `echo " $libs " | sed -e 's@ -lndbm @ @' -e 's@ -lgdbm @ @' -e 's@ -ldbm @ @' -e 's@ -ldb @ @'`
+ shift
+ perllibs="$*"
+ ;;
+ *) perllibs="$libs"
+ ;;
+ esac
+ ;;
+esac
+
: Remove build directory name from cppstdin so it can be used from
: either the present location or the final installed location.
echo " "
cccdlflags='$cccdlflags'
ccdlflags='$ccdlflags'
ccflags='$ccflags'
+ccflags_uselargefiles='$ccflags_uselargefiles'
+ccname='$ccname'
ccsymbols='$ccsymbols'
+ccversion='$ccversion'
cf_by='$cf_by'
cf_email='$cf_email'
cf_time='$cf_time'
cryptlib='$cryptlib'
csh='$csh'
d_Gconvert='$d_Gconvert'
-d_PRIEldbl='$d_PRIEldbl'
-d_PRIFldbl='$d_PRIFldbl'
-d_PRIGldbl='$d_PRIGldbl'
-d_PRIX64='$d_PRIX64'
+d_PRIEUldbl='$d_PRIEUldbl'
+d_PRIFUldbl='$d_PRIFUldbl'
+d_PRIGUldbl='$d_PRIGUldbl'
+d_PRIXU64='$d_PRIXU64'
d_PRId64='$d_PRId64'
d_PRIeldbl='$d_PRIeldbl'
d_PRIfldbl='$d_PRIfldbl'
d_PRIo64='$d_PRIo64'
d_PRIu64='$d_PRIu64'
d_PRIx64='$d_PRIx64'
+d_SCNfldbl='$d_SCNfldbl'
d_access='$d_access'
d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_endpent='$d_endpent'
d_endpwent='$d_endpwent'
d_endsent='$d_endsent'
-d_endspent='$d_endspent'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fchmod='$d_fchmod'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
d_fpos64_t='$d_fpos64_t'
+d_frexpl='$d_frexpl'
d_fs_data_s='$d_fs_data_s'
d_fseeko='$d_fseeko'
d_fsetpos='$d_fsetpos'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
d_getcwd='$d_getcwd'
+d_getespwnam='$d_getespwnam'
+d_getfsstat='$d_getfsstat'
d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_getppid='$d_getppid'
d_getprior='$d_getprior'
d_getprotoprotos='$d_getprotoprotos'
+d_getprpwnam='$d_getprpwnam'
d_getpwent='$d_getpwent'
d_getsbyname='$d_getsbyname'
d_getsbyport='$d_getsbyport'
d_getsent='$d_getsent'
d_getservprotos='$d_getservprotos'
-d_getspent='$d_getspent'
d_getspnam='$d_getspnam'
d_gettimeod='$d_gettimeod'
d_gnulibc='$d_gnulibc'
d_iconv='$d_iconv'
d_index='$d_index'
d_inetaton='$d_inetaton'
-d_int64t='$d_int64t'
+d_int64_t='$d_int64_t'
d_isascii='$d_isascii'
+d_isnan='$d_isnan'
+d_isnanl='$d_isnanl'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_ldbl_dig='$d_ldbl_dig'
d_lockf='$d_lockf'
d_longdbl='$d_longdbl'
d_longlong='$d_longlong'
+d_lseekproto='$d_lseekproto'
d_lstat='$d_lstat'
+d_madvise='$d_madvise'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
d_mkstemps='$d_mkstemps'
d_mktime='$d_mktime'
d_mmap='$d_mmap'
+d_modfl='$d_modfl'
d_mprotect='$d_mprotect'
d_msg='$d_msg'
d_msg_ctrunc='$d_msg_ctrunc'
d_mymalloc='$d_mymalloc'
d_nice='$d_nice'
d_nv_preserves_uv='$d_nv_preserves_uv'
+d_nv_preserves_uv_bits='$d_nv_preserves_uv_bits'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_open3='$d_open3'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
+d_perl_otherlibdirs='$d_perl_otherlibdirs'
d_phostname='$d_phostname'
d_pipe='$d_pipe'
d_poll='$d_poll'
d_pwgecos='$d_pwgecos'
d_pwpasswd='$d_pwpasswd'
d_pwquota='$d_pwquota'
+d_qgcvt='$d_qgcvt'
d_quad='$d_quad'
d_readdir='$d_readdir'
d_readlink='$d_readlink'
d_setpgrp2='$d_setpgrp2'
d_setpgrp='$d_setpgrp'
d_setprior='$d_setprior'
+d_setproctitle='$d_setproctitle'
d_setpwent='$d_setpwent'
d_setregid='$d_setregid'
d_setresgid='$d_setresgid'
d_setruid='$d_setruid'
d_setsent='$d_setsent'
d_setsid='$d_setsid'
-d_setspent='$d_setspent'
d_setvbuf='$d_setvbuf'
d_sfio='$d_sfio'
d_shm='$d_shm'
d_sigaction='$d_sigaction'
d_sigsetjmp='$d_sigsetjmp'
d_socket='$d_socket'
+d_socklen_t='$d_socklen_t'
d_sockpair='$d_sockpair'
+d_socks5_init='$d_socks5_init'
d_sqrtl='$d_sqrtl'
d_statblks='$d_statblks'
d_statfs_f_flags='$d_statfs_f_flags'
d_statvfs='$d_statvfs'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
+d_stdio_ptr_lval_nochange_cnt='$d_stdio_ptr_lval_nochange_cnt'
+d_stdio_ptr_lval_sets_cnt='$d_stdio_ptr_lval_sets_cnt'
d_stdio_stream_array='$d_stdio_stream_array'
d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
d_uname='$d_uname'
d_union_semun='$d_union_semun'
d_ustat='$d_ustat'
+d_vendorarch='$d_vendorarch'
d_vendorbin='$d_vendorbin'
d_vendorlib='$d_vendorlib'
d_vfork='$d_vfork'
full_ar='$full_ar'
full_csh='$full_csh'
full_sed='$full_sed'
+gccosandvers='$gccosandvers'
gccversion='$gccversion'
gidformat='$gidformat'
gidsign='$gidsign'
h_sysfile='$h_sysfile'
hint='$hint'
hostcat='$hostcat'
-huge='$huge'
i16size='$i16size'
i16type='$i16type'
i32size='$i32size'
i_gdbm='$i_gdbm'
i_grp='$i_grp'
i_iconv='$i_iconv'
+i_ieeefp='$i_ieeefp'
i_inttypes='$i_inttypes'
+i_libutil='$i_libutil'
i_limits='$i_limits'
i_locale='$i_locale'
i_machcthr='$i_machcthr'
i_netinettcp='$i_netinettcp'
i_niin='$i_niin'
i_poll='$i_poll'
+i_prot='$i_prot'
i_pthread='$i_pthread'
i_pwd='$i_pwd'
i_rpcsvcdbm='$i_rpcsvcdbm'
i_stddef='$i_stddef'
i_stdlib='$i_stdlib'
i_string='$i_string'
+i_sunmath='$i_sunmath'
i_sysaccess='$i_sysaccess'
i_sysdir='$i_sysdir'
i_sysfile='$i_sysfile'
i_sysioctl='$i_sysioctl'
i_syslog='$i_syslog'
i_sysmman='$i_sysmman'
+i_sysmode='$i_sysmode'
i_sysmount='$i_sysmount'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
i_systypes='$i_systypes'
i_sysuio='$i_sysuio'
i_sysun='$i_sysun'
+i_sysutsname='$i_sysutsname'
i_sysvfs='$i_sysvfs'
i_syswait='$i_syswait'
i_termio='$i_termio'
installsitelib='$installsitelib'
installstyle='$installstyle'
installusrbinperl='$installusrbinperl'
+installvendorarch='$installvendorarch'
installvendorbin='$installvendorbin'
installvendorlib='$installvendorlib'
intsize='$intsize'
ivtype='$ivtype'
known_extensions='$known_extensions'
ksh='$ksh'
-large='$large'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
+ldflags_uselargefiles='$ldflags_uselargefiles'
ldlibpthname='$ldlibpthname'
less='$less'
lib_ext='$lib_ext'
libsdirs='$libsdirs'
libsfiles='$libsfiles'
libsfound='$libsfound'
+libspath='$libspath'
libswanted='$libswanted'
+libswanted_uselargefiles='$libswanted_uselargefiles'
line='$line'
lint='$lint'
lkflags='$lkflags'
man3dir='$man3dir'
man3direxp='$man3direxp'
man3ext='$man3ext'
-medium='$medium'
mips_type='$mips_type'
mkdir='$mkdir'
mmaptype='$mmaptype'
-models='$models'
modetype='$modetype'
more='$more'
multiarch='$multiarch'
nm_so_opt='$nm_so_opt'
nonxs_ext='$nonxs_ext'
nroff='$nroff'
+nvEUformat='$nvEUformat'
+nvFUformat='$nvFUformat'
+nvGUformat='$nvGUformat'
+nveformat='$nveformat'
+nvfformat='$nvfformat'
+nvgformat='$nvgformat'
nvsize='$nvsize'
nvtype='$nvtype'
o_nonblock='$o_nonblock'
orderlib='$orderlib'
osname='$osname'
osvers='$osvers'
+otherlibdirs='$otherlibdirs'
package='$package'
pager='$pager'
passcat='$passcat'
patchlevel='$patchlevel'
path_sep='$path_sep'
+perl5='$perl5'
perl='$perl'
perladmin='$perladmin'
+perllibs='$perllibs'
perlpath='$perlpath'
pg='$pg'
phostname='$phostname'
randseedtype='$randseedtype'
ranlib='$ranlib'
rd_nodata='$rd_nodata'
+revision='$revision'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
-sPRIEldbl='$sPRIEldbl'
-sPRIFldbl='$sPRIFldbl'
-sPRIGldbl='$sPRIGldbl'
-sPRIX64='$sPRIX64'
+sPRIEUldbl='$sPRIEUldbl'
+sPRIFUldbl='$sPRIFUldbl'
+sPRIGUldbl='$sPRIGUldbl'
+sPRIXU64='$sPRIXU64'
sPRId64='$sPRId64'
sPRIeldbl='$sPRIeldbl'
sPRIfldbl='$sPRIfldbl'
sPRIo64='$sPRIo64'
sPRIu64='$sPRIu64'
sPRIx64='$sPRIx64'
+sSCNfldbl='$sSCNfldbl'
sched_yield='$sched_yield'
scriptdir='$scriptdir'
scriptdirexp='$scriptdirexp'
sitebin='$sitebin'
sitebinexp='$sitebinexp'
sitelib='$sitelib'
+sitelib_stem='$sitelib_stem'
sitelibexp='$sitelibexp'
siteprefix='$siteprefix'
siteprefixexp='$siteprefixexp'
+sizesize='$sizesize'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
-small='$small'
so='$so'
sockethdr='$sockethdr'
socketlib='$socketlib'
+socksizetype='$socksizetype'
sort='$sort'
spackage='$spackage'
spitshell='$spitshell'
-split='$split'
src='$src'
ssizetype='$ssizetype'
startperl='$startperl'
uniq='$uniq'
uquadtype='$uquadtype'
use5005threads='$use5005threads'
-use64bits='$use64bits'
+use64bitall='$use64bitall'
+use64bitint='$use64bitint'
usedl='$usedl'
useithreads='$useithreads'
uselargefiles='$uselargefiles'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+uvXUformat='$uvXUformat'
uvoformat='$uvoformat'
uvsize='$uvsize'
uvtype='$uvtype'
uvuformat='$uvuformat'
uvxformat='$uvxformat'
+vendorarch='$vendorarch'
+vendorarchexp='$vendorarchexp'
vendorbin='$vendorbin'
vendorbinexp='$vendorbinexp'
vendorlib='$vendorlib'
+vendorlib_stem='$vendorlib_stem'
vendorlibexp='$vendorlibexp'
vendorprefix='$vendorprefix'
vendorprefixexp='$vendorprefixexp'
version='$version'
+versiononly='$versiononly'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
. UU/myread
case "$ans" in
y*)
- $make depend && echo "Now you must run a $make."
+ $make depend && echo "Now you must run '$make'."
;;
*)
echo "You must run '$make depend' then '$make'."
projects / p5sagit/p5-mst-13.2.git / blobdiff