# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Sat Dec 29 20:23:06 EET 2001 [metaconfig 3.0 PL70]
+# Generated on Fri Jun 21 16:37:53 EET DST 2002 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.org)
cat >c1$$ <<EOF
bin=''
binexp=''
installbin=''
-bincompat5005=''
-d_bincompat5005=''
byteorder=''
cc=''
ccflags=''
d_access=''
d_accessx=''
d_alarm=''
+asctime_r_proto=''
+d_asctime_r=''
d_attribut=''
d_bcmp=''
d_bcopy=''
d_const=''
cryptlib=''
d_crypt=''
+crypt_r_proto=''
+d_crypt_r=''
d_csh=''
full_csh=''
+ctermid_r_proto=''
+d_ctermid_r=''
+ctime_r_proto=''
+d_ctime_r=''
d_cuserid=''
d_dbl_dig=''
d_dbminitproto=''
d_dlsymun=''
d_dosuid=''
d_suidsafe=''
+d_drand48_r=''
+drand48_r_proto=''
d_drand48proto=''
d_dup2=''
d_eaccess=''
d_endgrent=''
+d_endgrent_r=''
+endgrent_r_proto=''
d_endhent=''
+d_endhostent_r=''
+endhostent_r_proto=''
d_endnent=''
+d_endnetent_r=''
+endnetent_r_proto=''
d_endpent=''
+d_endprotoent_r=''
+endprotoent_r_proto=''
d_endpwent=''
+d_endpwent_r=''
+endpwent_r_proto=''
d_endsent=''
+d_endservent_r=''
+endservent_r_proto=''
d_fchdir=''
d_fchmod=''
d_fchown=''
d_getespwnam=''
d_getfsstat=''
d_getgrent=''
+d_getgrent_r=''
+getgrent_r_proto=''
+d_getgrgid_r=''
+getgrgid_r_proto=''
+d_getgrnam_r=''
+getgrnam_r_proto=''
d_getgrps=''
d_gethbyaddr=''
d_gethbyname=''
d_gethname=''
d_phostname=''
d_uname=''
+d_gethostbyaddr_r=''
+gethostbyaddr_r_proto=''
+d_gethostbyname_r=''
+gethostbyname_r_proto=''
+d_gethostent_r=''
+gethostent_r_proto=''
d_gethostprotos=''
d_getitimer=''
d_getlogin=''
+d_getlogin_r=''
+getlogin_r_proto=''
d_getmnt=''
d_getmntent=''
d_getnbyaddr=''
d_getnbyname=''
d_getnent=''
+d_getnetbyaddr_r=''
+getnetbyaddr_r_proto=''
+d_getnetbyname_r=''
+getnetbyname_r_proto=''
+d_getnetent_r=''
+getnetent_r_proto=''
d_getnetprotos=''
d_getpagsz=''
d_getpent=''
d_getprior=''
d_getpbyname=''
d_getpbynumber=''
+d_getprotobyname_r=''
+getprotobyname_r_proto=''
+d_getprotobynumber_r=''
+getprotobynumber_r_proto=''
+d_getprotoent_r=''
+getprotoent_r_proto=''
d_getprotoprotos=''
d_getprpwnam=''
d_getpwent=''
+d_getpwent_r=''
+getpwent_r_proto=''
+d_getpwnam_r=''
+getpwnam_r_proto=''
+d_getpwuid_r=''
+getpwuid_r_proto=''
d_getsent=''
+d_getservbyname_r=''
+getservbyname_r_proto=''
+d_getservbyport_r=''
+getservbyport_r_proto=''
+d_getservent_r=''
+getservent_r_proto=''
d_getservprotos=''
d_getspnam=''
+d_getspnam_r=''
+getspnam_r_proto=''
d_getsbyname=''
d_getsbyport=''
+d_gmtime_r=''
+gmtime_r_proto=''
d_gnulibc=''
+gnulibc_version=''
d_hasmntopt=''
d_htonl=''
d_inetaton=''
d_lchown=''
d_ldbl_dig=''
d_link=''
+d_localtime_r=''
+localtime_r_proto=''
d_locconv=''
d_lockf=''
d_longdbl=''
d_sched_yield=''
sched_yield=''
d_qgcvt=''
+d_random_r=''
+random_r_proto=''
+d_readdir64_r=''
+readdir64_r_proto=''
d_readdir=''
d_rewinddir=''
d_seekdir=''
d_telldir=''
+d_readdir_r=''
+readdir_r_proto=''
d_readlink=''
d_readv=''
d_recvmsg=''
d_setegid=''
d_seteuid=''
d_setgrent=''
+d_setgrent_r=''
+setgrent_r_proto=''
d_setgrps=''
d_sethent=''
+d_sethostent_r=''
+sethostent_r_proto=''
d_setitimer=''
d_setlinebuf=''
d_setlocale=''
+d_setlocale_r=''
+setlocale_r_proto=''
d_setnent=''
+d_setnetent_r=''
+setnetent_r_proto=''
d_setpent=''
d_setpgid=''
d_setpgrp2=''
d_setpgrp=''
d_setprior=''
d_setproctitle=''
+d_setprotoent_r=''
+setprotoent_r_proto=''
d_setpwent=''
+d_setpwent_r=''
+setpwent_r_proto=''
d_setregid=''
d_setresgid=''
d_setresuid=''
d_setrgid=''
d_setruid=''
d_setsent=''
+d_setservent_r=''
+setservent_r_proto=''
d_setsid=''
d_setvbuf=''
d_sfio=''
d_socklen_t=''
d_socks5_init=''
d_sqrtl=''
+d_srand48_r=''
+srand48_r_proto=''
+d_srandom_r=''
+srandom_r_proto=''
d_sresgproto=''
d_sresuproto=''
d_statblks=''
d_strerror=''
d_sysernlst=''
d_syserrlst=''
+d_strerror_r=''
+strerror_r_proto=''
d_strftime=''
d_strtod=''
d_strtol=''
timetype=''
clocktype=''
d_times=''
+d_tmpnam_r=''
+tmpnam_r_proto=''
d_truncate=''
+d_ttyname_r=''
+ttyname_r_proto=''
d_tzname=''
d_u32align=''
d_ualarm=''
h_fcntl=''
h_sysfile=''
i_arpainet=''
+i_crypt=''
db_hashtype=''
db_prefixtype=''
db_version_major=''
i_sgtty=''
i_termio=''
i_termios=''
+d_tm_tm_gmtoff=''
+d_tm_tm_zone=''
i_systime=''
i_systimek=''
i_time=''
perladmin=''
perlpath=''
d_nv_preserves_uv=''
-d_nv_preserves_uv_bits=''
i16size=''
i16type=''
i32size=''
i8type=''
ivsize=''
ivtype=''
+nv_preserves_uv_bits=''
nvsize=''
nvtype=''
u16size=''
eunicefix=/etc/unixtovms.exe
fi
-if test -f "/system/gnu_library/bin/ar.pm"; then
- _exe=".pm"
+: Set executable suffix now -- needed before hints available
+if test -f "/libs/version.library"; then
+: Amiga OS
+ _exe=""
+elif test -f "/system/gnu_library/bin/ar.pm"; then
+: Stratus VOS
+ _exe=".pm"
+elif test -n "$DJGPP"; then
+: DOS DJGPP
+ _exe=".exe"
+elif test -d c:/. ; then
+: OS/2 or cygwin
+ _exe=".exe"
fi
i_whoami=''
xcat=/bin/cat
test -f $xcat$_exe || xcat=/usr/bin/cat
if test ! -f $xcat$_exe; then
- for p in $paths; do
+ for p in `echo $PATH | sed -e "s/$p_/ /g"` $paths; do
if test -f $p/cat$_exe; then
xcat=$p/cat
break
zzz=''
uuu=undef
case "$yyy" in
- *=*) zzz=`echo $yyy|sed 's!=.*!!'`
+ *=*) zzz=`echo "$yyy"|sed 's!=.*!!'`
case "$zzz" in
*:*) zzz='' ;;
*) xxx=append
- zzz=" "`echo $yyy|sed 's!^[^=]*=!!'`
- yyy=`echo $yyy|sed 's!=.*!!'` ;;
+ zzz=" "`echo "$yyy"|sed 's!^[^=]*=!!'`
+ yyy=`echo "$yyy"|sed 's!=.*!!'` ;;
esac
;;
esac
case "$xxx" in
'') case "$yyy" in
- *:*) xxx=`echo $yyy|sed 's!:.*!!'`
- yyy=`echo $yyy|sed 's!^[^:]*:!!'`
- zzz=`echo $yyy|sed 's!^[^=]*=!!'`
- yyy=`echo $yyy|sed 's!=.*!!'` ;;
- *) xxx=`echo $yyy|sed 's!:.*!!'`
- yyy=`echo $yyy|sed 's!^[^:]*:!!'` ;;
+ *:*) xxx=`echo "$yyy"|sed 's!:.*!!'`
+ yyy=`echo "$yyy"|sed 's!^[^:]*:!!'`
+ zzz=`echo "$yyy"|sed 's!^[^=]*=!!'`
+ yyy=`echo "$yyy"|sed 's!=.*!!'` ;;
+ *) xxx=`echo "$yyy"|sed 's!:.*!!'`
+ yyy=`echo "$yyy"|sed 's!^[^:]*:!!'` ;;
esac
;;
esac
set x `awk '{print $1}' < MANIFEST | grep '\.SH$'`
else
echo "(Looking for .SH files under the source directory.)"
- set x `(cd $src; find . -name "*.SH" -print)`
+ set x `(cd "$src"; find . -name "*.SH" -print)`
fi
shift
case $# in
-0) set x `(cd $src; echo *.SH)`; shift;;
+0) set x `(cd "$src"; echo *.SH)`; shift;;
esac
-if test ! -f $src/$1; then
+if test ! -f "$src/$1"; then
shift
fi
mkdir_p='
*/*)
dir=`expr X$file : 'X\(.*\)/'`
file=`expr X$file : 'X.*/\(.*\)'`
- (cd $dir && . ./$file)
+ (cd "$dir" && . ./$file)
;;
*)
. ./$file
dir=`expr X$file : 'X\(.*\)/'`
file=`expr X$file : 'X.*/\(.*\)'`
(set x $dir; shift; eval $mkdir_p)
- sh <$src/$dir/$file
+ sh <"$src/$dir/$file"
;;
*)
- sh <$src/$file
+ sh <"$src/$file"
;;
esac
;;
esac
done
-if test -f $src/config_h.SH; then
+if test -f "$src/config_h.SH"; then
if test ! -f config.h; then
: oops, they left it out of MANIFEST, probably, so do it anyway.
- . $src/config_h.SH
+ . "$src/config_h.SH"
fi
fi
EOS
: Now test for existence of everything in MANIFEST
echo " "
-if test -f $rsrc/MANIFEST; then
+if test -f "$rsrc/MANIFEST"; then
echo "First let's make sure your kit is complete. Checking..." >&4
- awk '$1 !~ /PACK[A-Z]+/ {print $1}' $rsrc/MANIFEST | split -50
+ awk '$1 !~ /PACK[A-Z]+/ {print $1}' "$rsrc/MANIFEST" | (split -l 50 2>/dev/null || split -50)
rm -f missing
tmppwd=`pwd`
for filelist in x??; do
- (cd $rsrc; ls `cat $tmppwd/$filelist` >/dev/null 2>>$tmppwd/missing)
+ (cd "$rsrc"; ls `cat "$tmppwd/$filelist"` >/dev/null 2>>"$tmppwd/missing")
done
if test -s missing; then
cat missing >&4
esac
fi
if test X"$trnl" = X; then
+ case "`echo foo|tr '\r\n' xy 2>/dev/null`" in
+ fooxy) trnl='\n\r' ;;
+ esac
+fi
+if test X"$trnl" = X; then
cat <<EOM >&2
$me: Fatal Error: cannot figure out how to translate newlines with 'tr'.
'') xxx=`./loc $file $file $pth`;;
*) xxx=`./loc $xxx $xxx $pth`;;
esac
- eval $file=$xxx
+ eval $file=$xxx$_exe
eval _$file=$xxx
case "$xxx" in
/*)
;;
esac
-cat <<EOS >checkcc
+cat <<EOS >trygcc
$startsh
EOS
-cat <<'EOSC' >>checkcc
+cat <<'EOSC' >>trygcc
case "$cc" in
'') ;;
*) $rm -f try try.*
fi
fi
case "$ans" in
- [yY]*) cc=gcc; ccname=gcc; ccflags=''; despair=no ;;
+ [yY]*) cc=gcc; ccname=gcc; ccflags=''; despair=no;
+ if $test -f usethreads.cbu; then
+ $cat >&4 <<EOM
+
+*** However, any setting of the C compiler flags (e.g. for thread support)
+*** has been lost. It may be necessary to pass -Dcc=gcc to Configure
+*** (together with e.g. -Dusethreads).
+
+EOM
+ fi;;
esac
fi
fi
+ fi
+ $rm -f try try.*
+ ;;
+esac
+EOSC
+
+cat <<EOS >checkcc
+$startsh
+EOS
+cat <<'EOSC' >>checkcc
+case "$cc" in
+'') ;;
+*) $rm -f try try.*
+ $cat >try.c <<EOM
+int main(int argc, char *argv[]) {
+ return 0;
+}
+EOM
+ if $cc -o try $ccflags $ldflags try.c; then
+ :
+ else
if $test X"$despair" = Xyes; then
- $cat >&4 <<EOM
+ echo "Uh-oh, the C compiler '$cc' doesn't seem to be working." >&4
+ fi
+ $cat >&4 <<EOM
You need to find a working C compiler.
Either (purchase and) install the C compiler supplied by your OS vendor,
or for a free C compiler try http://gcc.gnu.org/
I cannot continue any further, aborting.
EOM
- exit 1
- fi
+ exit 1
fi
$rm -f try try.*
;;
: determine whether symbolic links are supported
echo " "
case "$lns" in
-*"ln -s")
+*"ln"*" -s")
echo "Checking how to test for symbolic links..." >&4
$lns blurfl sym
if $test "X$issymlink" = X; then
exit 1
;;
*) case "$lns:$issymlink" in
- *"ln -s:"*"test -"?)
+ *"ln"*" -s:"*"test -"?)
echo "Creating the symbolic links..." >&4
echo "(First creating the subdirectories...)" >&4
cd ..
;;
next*) osname=next ;;
nonstop-ux) osname=nonstopux ;;
+ openbsd) osname=openbsd
+ osvers="$3"
+ ;;
POSIX-BC | posix-bc ) osname=posix-bc
osvers="$3"
;;
*) eval "$var=$val";;
esac'
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks. If you use SOCKS you also need
+to use the PerlIO abstraction layer, this will be implicitly selected.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
+eval $setvar
+
+case "$usesocks" in
+$define|true|[yY]*) useperlio="$define";;
+esac
+
+case "$useperlio" in
+$define|true|[yY]*|'') dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Previous version of $package used the standard IO mechanisms as
+defined in <stdio.h>. Versions 5.003_02 and later of $package allow
+alternate IO mechanisms via the PerlIO abstraction layer, but the
+stdio mechanism is still available if needed. The abstraction layer
+can use AT&T's sfio (if you already have sfio installed) or regular stdio.
+Using PerlIO with sfio may cause problems with some extension modules.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Use the PerlIO abstraction layer?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
+ ;;
+*)
+ echo "Ok, doing things the stdio way."
+ val="$undef"
+ ;;
+esac
+set useperlio
+eval $setvar
+
+case "$usesocks" in
+$define|true|[yY]*)
+ case "$useperlio" in
+ $define|true|[yY]*) ;;
+ *) cat >&4 <<EOM
+
+You are using the SOCKS proxy protocol library which means that you
+should also use the PerlIO layer. You may be headed for trouble.
+
+EOM
+ ;;
+ esac
+ ;;
+esac
+
+
case "$usethreads" in
$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
+*) # Catch case where user specified ithreads or 5005threads but
+ # forgot -Dusethreads (A.D. 4/2002)
+ case "$useithreads$use5005threads" in
+ *$define*)
+ case "$useperlio" in
+ "$define") dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+ *) dflt='n';;
+ esac
+ ;;
esac
cat <<EOM
Perl can be built to take advantage of threads on some systems.
To do so, Configure can be run with -Dusethreads.
-Note that threading is a highly experimental feature, and
-some known race conditions still remain. If you choose to try
-it, be very sure to not actually deploy it for production
-purposes. README.threads has more details, and is required
-reading if you enable threads.
+Note that Perl built with threading support runs slightly slower
+and uses more memory than plain Perl. The current implementation
+is believed to be stable, but it is fairly new, and so should be
+treated with caution.
If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
$define)
$cat <<EOM
-As of 5.5.640, Perl has two different internal threading implementations,
-the 5.005 version (5005threads) and an interpreter-based version
-(ithreads) that has one interpreter per thread. Both are very
-experimental. This arrangement exists to help developers work out
-which one is better.
+Since release 5.6, Perl has had two different threading implementations,
+the newer interpreter-based version (ithreads) with one interpreter per
+thread, and the older 5.005 version (5005threads).
+The 5005threads version is effectively unmaintained and will probably be
+removed in Perl 5.10, so there should be no need to build a Perl using it
+unless needed for backwards compatibility with some existing 5.005threads
+code.
-If you're a casual user, you probably don't want interpreter-threads
-at this time. But if you do, the 'threads' module allows their use,
-and the 'Thread' module offers an interface to both 5005threads and
-ithreads (whichever has been configured).
EOM
: Default to ithreads unless overridden on command line or with
: old config.sh
case "$useithreads" in
$undef|false|[nN]*) dflt='n';;
esac
- rp='Use interpreter-based ithreads?'
+ rp='Use the newer interpreter-based ithreads?'
. ./myread
case "$ans" in
y|Y) val="$define" ;;
;;
esac
+if test X"$usethreads" = "X$define" -a "X$useperlio" = "Xundef"; then
+ cat >&4 <<EOF
+***
+*** To build with ithreads you must also use the PerlIO layer.
+*** Cannot continue, aborting.
+***
+EOF
+ exit 1
+fi
+
case "$d_oldpthreads" in
'') : Configure tests would be welcome here. For now, assume undef.
val="$undef" ;;
rp="Use which C compiler?"
. ./myread
cc="$ans"
+
+: See if they have not cc but they do have gcc
+. ./trygcc
: Look for a hint-file generated 'call-back-unit'. Now that the
: user has specified the compiler, we may need to set or change some
: other defaults.
'') ccname="$cc" ;;
esac
+# gcc 3.1 complains about adding -Idirectories that it already knows about,
+# so we will take those off from locincpth.
+case "$gccversion" in
+3*)
+ echo "main(){}">try.c
+ for incdir in `$cc -v -c try.c 2>&1 | \
+ sed '1,/^#include <\.\.\.>/d;/^End of search list/,$d;s/^ //'` ; do
+ locincpth=`echo $locincpth | sed s!$incdir!!`
+ done
+ $rm -f try try.*
+esac
: decide how portable to be. Allow command line overrides.
case "$d_portable" in
case "$fn" in
*\(*)
- expr $fn : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
+ : getfile will accept an answer from the comma-separated list
+ : enclosed in parentheses even if it does not meet other criteria.
+ expr "$fn" : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
fn=`echo $fn | sed 's/(.*)//'`
;;
esac
'') firstmakefile='makefile';;
esac
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks. If you use SOCKS you also need
-to use the PerlIO abstraction layer, this will be implicitly selected.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Build Perl for SOCKS?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set usesocks
-eval $setvar
-
-case "$usesocks" in
-$define|true|[yY]*) useperlio="$define";;
-esac
-
: Looking for optional libraries
echo " "
echo "Checking for optional libraries..." >&4
for thisdir in $libspath; do
xxx=''
if $test ! -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
- xxx=`ls $thisdir/lib$thislib.$so.[0-9] 2>/dev/null|tail -1`
+ xxx=`ls $thisdir/lib$thislib.$so.[0-9] 2>/dev/null|sed -n '$p'`
$test -f "$xxx" && eval $libscheck
$test -f "$xxx" && libstyle=shared
fi
esac
$rm -f try try.*
-: check for void type
+: check for long long
echo " "
-echo "Checking to see how well your C compiler groks the void type..." >&4
-case "$voidflags" in
-'')
- $cat >try.c <<'EOCP'
-#if TRY & 1
-void sub() {
-#else
-sub() {
-#endif
- extern void moo(); /* function returning void */
- void (*goo)(); /* ptr to func returning void */
-#if TRY & 8
- void *hue; /* generic ptr */
-#endif
-#if TRY & 2
- void (*foo[10])();
-#endif
+echo "Checking to see if you have long long..." >&4
+echo 'int main() { long long x = 7; return 0; }' > try.c
+set try
+if eval $compile; then
+ val="$define"
+ echo "You have long long."
+else
+ val="$undef"
+ echo "You do not have long long."
+fi
+$rm try.*
+set d_longlong
+eval $setvar
-#if TRY & 4
- if(goo == moo) {
- exit(0);
- }
-#endif
- exit(0);
+: check for length of long long
+case "${d_longlong}${longlongsize}" in
+$define)
+ echo " "
+ echo "Checking to see how big your long longs are..." >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(long long));
+ return(0);
}
-int main() { sub(); }
EOCP
- if $cc $ccflags -c -DTRY=$defvoidused try.c >.out 2>&1 ; then
- voidflags=$defvoidused
- echo "Good. It appears to support void to the level $package wants.">&4
- if $contains warning .out >/dev/null 2>&1; then
- echo "However, you might get some warnings that look like this:"
- $cat .out
- fi
+ set try
+ if eval $compile_ok; then
+ longlongsize=`$run ./try`
+ echo "Your long longs are $longlongsize bytes long."
else
-echo "Hmm, your compiler has some difficulty with void. Checking further..." >&4
- if $cc $ccflags -c -DTRY=1 try.c >/dev/null 2>&1; then
- echo "It supports 1..."
- if $cc $ccflags -c -DTRY=3 try.c >/dev/null 2>&1; then
- echo "It also supports 2..."
- if $cc $ccflags -c -DTRY=7 try.c >/dev/null 2>&1; then
- voidflags=7
- echo "And it supports 4 but not 8 definitely."
- else
- echo "It doesn't support 4..."
- if $cc $ccflags -c -DTRY=11 try.c >/dev/null 2>&1; then
- voidflags=11
- echo "But it supports 8."
- else
- voidflags=3
- echo "Neither does it support 8."
- fi
- fi
- else
- echo "It does not support 2..."
- if $cc $ccflags -c -DTRY=13 try.c >/dev/null 2>&1; then
- voidflags=13
- echo "But it supports 4 and 8."
- else
- if $cc $ccflags -c -DTRY=5 try.c >/dev/null 2>&1; then
- voidflags=5
- echo "And it supports 4 but has not heard about 8."
- else
- echo "However it supports 8 but not 4."
- fi
- fi
- fi
- else
- echo "There is no support at all for void."
- voidflags=0
- fi
+ dflt='8'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a long long (in bytes)?"
+ . ./myread
+ longlongsize="$ans"
fi
-esac
-case "$voidflags" in
-"$defvoidused") ;;
-*) $cat >&4 <<'EOM'
- Support flag bits are:
- 1: basic void declarations.
- 2: arrays of pointers to functions returning void.
- 4: operations between pointers to and addresses of void functions.
- 8: generic void pointers.
-EOM
- dflt="$voidflags";
- rp="Your void support flags add up to what?"
- . ./myread
- voidflags="$ans"
- ;;
-esac
-$rm -f try.* .out
-
-: check for length of pointer
-echo " "
-case "$ptrsize" in
-'')
- echo "Checking to see how big your pointers are..." >&4
- if test "$voidflags" -gt 7; then
- echo '#define VOID_PTR char *' > try.c
- else
- echo '#define VOID_PTR void *' > try.c
- fi
- $cat >>try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(VOID_PTR));
- exit(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- ptrsize=`$run ./try`
- echo "Your pointers are $ptrsize bytes long."
- else
- dflt='4'
- echo "(I can't seem to compile the test program. Guessing...)" >&4
- rp="What is the size of a pointer (in bytes)?"
- . ./myread
- ptrsize="$ans"
- fi
- ;;
-esac
-$rm -f try.c try
-
-: check for long long
-echo " "
-echo "Checking to see if you have long long..." >&4
-echo 'int main() { long long x = 7; return 0; }' > try.c
-set try
-if eval $compile; then
- val="$define"
- echo "You have long long."
-else
- val="$undef"
- echo "You do not have long long."
-fi
-$rm try.*
-set d_longlong
-eval $setvar
-
-: check for length of long long
-case "${d_longlong}${longlongsize}" in
-$define)
- echo " "
- echo "Checking to see how big your long longs are..." >&4
- $cat >try.c <<'EOCP'
-#include <stdio.h>
-int main()
-{
- printf("%d\n", (int)sizeof(long long));
- return(0);
-}
-EOCP
- set try
- if eval $compile_ok; then
- longlongsize=`$run ./try`
- echo "Your long longs are $longlongsize bytes long."
- else
- dflt='8'
- echo " "
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a long long (in bytes)?"
- . ./myread
- longlongsize="$ans"
- fi
- if $test "X$longsize" = "X$longlongsize"; then
- echo "(That isn't any different from an ordinary long.)"
- fi
- ;;
+ if $test "X$longsize" = "X$longlongsize"; then
+ echo "(That isn't any different from an ordinary long.)"
+ fi
+ ;;
esac
$rm -f try.* try
;;
esac
-case "$use64bitall" in
-"$define"|true|[yY]*)
- case "$ptrsize" in
- 4) cat <<EOM >&4
-
-*** You have chosen a maximally 64-bit build, but your pointers
-*** are only 4 bytes wide, disabling maximal 64-bitness.
-
-EOM
- use64bitall="$undef"
- case "$use64bitint" in
- "$define"|true|[yY]*) ;;
- *) cat <<EOM >&4
-
-*** Downgrading from maximal 64-bitness to using 64-bit integers.
-
-EOM
- use64bitint="$define"
- ;;
- esac
- ;;
- esac
- ;;
-esac
-
case "$use64bitint" in
"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
echo " "
echo "Checking for GNU C Library..." >&4
-cat >try.c <<EOM
+cat >try.c <<'EOCP'
+/* Find out version of GNU C library. __GLIBC__ and __GLIBC_MINOR__
+ alone are insufficient to distinguish different versions, such as
+ 2.0.6 and 2.0.7. The function gnu_get_libc_version() appeared in
+ libc version 2.1.0. A. Dougherty, June 3, 2002.
+*/
#include <stdio.h>
-int main()
+int main(void)
{
#ifdef __GLIBC__
- exit(0);
+# ifdef __GLIBC_MINOR__
+# if __GLIBC__ >= 2 && __GLIBC_MINOR__ >= 1
+# include <gnu/libc-version.h>
+ printf("%s\n", gnu_get_libc_version());
+# else
+ printf("%d.%d\n", __GLIBC__, __GLIBC_MINOR__);
+# endif
+# else
+ printf("%d\n", __GLIBC__);
+# endif
+ return 0;
#else
- exit(1);
+ return 1;
#endif
}
-EOM
+EOCP
set try
-if eval $compile_ok && $run ./try; then
+if eval $compile_ok && $run ./try > glibc.ver; then
val="$define"
- echo "You are using the GNU C Library"
+ gnulibc_version=`$cat glibc.ver`
+ echo "You are using the GNU C Library version $gnulibc_version"
else
val="$undef"
+ gnulibc_version=''
echo "You are not using the GNU C Library"
fi
-$rm -f try try.*
+$rm -f try try.* glibc.ver
set d_gnulibc
eval $setvar
$echo $n ".$c"
$grep fprintf libc.tmp > libc.ptf
xscan='eval "<libc.ptf $com >libc.list"; $echo $n ".$c" >&4'
-xrun='eval "<libc.tmp $com >libc.list"; echo "done" >&4'
+xrun='eval "<libc.tmp $com >libc.list"; echo "done." >&4'
xxx='[ADTSIW]'
if com="$sed -n -e 's/__IO//' -e 's/^.* $xxx *_[_.]*//p' -e 's/^.* $xxx *//p'";\
eval $xscan;\
set sqrtl d_sqrtl
eval $inlibc
-case "$ccflags" in
-*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Perl can be built to take advantage of long doubles which
-(if available) may give more accuracy and range for floating point numbers.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Try to use long doubles if available?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set uselongdouble
-eval $setvar
-
-case "$uselongdouble" in
-true|[yY]*) uselongdouble="$define" ;;
-esac
-
-case "$uselongdouble" in
-$define)
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that long doubles should be used,
-: we may need to set or change some other defaults.
- if $test -f uselongdouble.cbu; then
- echo "Your platform has some specific hints for long doubles, using them..."
- . ./uselongdouble.cbu
- else
- $cat <<EOM
-(Your platform doesn't have any specific hints for long doubles.)
-EOM
- fi
- ;;
-esac
-
-case "$uselongdouble:$d_sqrtl" in
-$define:$undef)
- $cat <<EOM >&4
-
-*** You requested the use of long doubles but you do not seem to have
-*** the mathematic functions for long doubles. I'm disabling the use
-*** of long doubles.
-
-EOM
- uselongdouble=$undef
- ;;
-esac
-
: check for length of double
echo " "
case "$doublesize" in
esac
$rm -f try.* try
-case "$useperlio" in
-$define|true|[yY]*|'') dflt='y';;
-*) dflt='n';;
-esac
-cat <<EOM
-
-Previous version of $package used the standard IO mechanisms as
-defined in <stdio.h>. Versions 5.003_02 and later of $package allow
-alternate IO mechanisms via the PerlIO abstraction layer, but the
-stdio mechanism is still available if needed. The abstraction layer
-can use AT&T's sfio (if you already have sfio installed) or regular stdio.
-Using PerlIO with sfio may cause problems with some extension modules.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Use the PerlIO abstraction layer?'
-. ./myread
-case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- echo "Ok, doing things the stdio way."
- val="$undef"
- ;;
-esac
-set useperlio
-eval $setvar
-
-case "$usesocks" in
-$define|true|[yY]*)
- case "$useperlio" in
- $define|true|[yY]*) ;;
- *) cat >&4 <<EOM
+echo " "
-You are using the SOCKS proxy protocol library which means that you
-should also use the PerlIO layer. You may be headed for trouble.
+if $test X"$d_longdbl" = X"$define"; then
-EOM
- ;;
- esac
- ;;
-esac
+echo "Checking how to print long doubles..." >&4
-
-: determine the architecture name
-echo " "
-if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
- tarch=`arch`"-$osname"
-elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
- if uname -m > tmparch 2>&1 ; then
- tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
- -e 's/$/'"-$osname/" tmparch`
- else
- tarch="$osname"
+if $test X"$sPRIfldbl" = X -a X"$doublesize" = X"$longdblsize"; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ double d = 123.456;
+ printf("%.3f\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`$run ./try`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
+ sPRIFUldbl='"F"'; sPRIGUldbl='"G"'; sPRIEUldbl='"E"';
+ echo "We will use %f."
+ ;;
+ esac
fi
- $rm -f tmparch
-else
- tarch="$osname"
fi
-case "$myarchname" in
-''|"$tarch") ;;
-*)
- echo "(Your architecture name used to be $myarchname.)"
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3Lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`$run ./try`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
+ sPRIFUldbl='"LF"'; sPRIGUldbl='"LG"'; sPRIEUldbl='"LE"';
+ echo "We will use %Lf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3llf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`$run ./try`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
+ sPRIFUldbl='"llF"'; sPRIGUldbl='"llG"'; sPRIEUldbl='"llE"';
+ echo "We will use %llf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#include <stdio.h>
+int main() {
+ long double d = 123.456;
+ printf("%.3lf\n", d);
+}
+EOCP
+ set try
+ if eval $compile; then
+ yyy=`$run ./try`
+ case "$yyy" in
+ 123.456)
+ sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
+ sPRIFUldbl='"lF"'; sPRIGUldbl='"lG"'; sPRIEUldbl='"lE"';
+ echo "We will use %lf."
+ ;;
+ esac
+ fi
+fi
+
+if $test X"$sPRIfldbl" = X; then
+ echo "Cannot figure out how to print long doubles." >&4
+else
+ sSCNfldbl=$sPRIfldbl # expect consistency
+fi
+
+$rm -f try try.*
+
+fi # d_longdbl
+
+case "$sPRIfldbl" in
+'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
+ d_PRIFUldbl="$undef"; d_PRIGUldbl="$undef"; d_PRIEUldbl="$undef";
+ d_SCNfldbl="$undef";
+ ;;
+*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
+ d_PRIFUldbl="$define"; d_PRIGUldbl="$define"; d_PRIEUldbl="$define";
+ d_SCNfldbl="$define";
+ ;;
+esac
+
+: see if modfl exists
+set modfl d_modfl
+eval $inlibc
+
+d_modfl_pow32_bug="$undef"
+
+case "$d_longdbl$d_modfl" in
+$define$define)
+ $cat <<EOM
+Checking to see whether your modfl() is okay for large values...
+EOM
+$cat >try.c <<EOCP
+#include <math.h>
+#include <stdio.h>
+int main() {
+ long double nv = 4294967303.15;
+ long double v, w;
+ v = modfl(nv, &w);
+#ifdef __GLIBC__
+ printf("glibc");
+#endif
+ printf(" %"$sPRIfldbl" %"$sPRIfldbl" %"$sPRIfldbl"\n", nv, v, w);
+ return 0;
+}
+EOCP
+ case "$osname:$gccversion" in
+ aix:) saveccflags="$ccflags"
+ ccflags="$ccflags -qlongdouble" ;; # to avoid core dump
+ esac
+ set try
+ if eval $compile; then
+ foo=`$run ./try`
+ case "$foo" in
+ *" 4294967303.150000 1.150000 4294967302.000000")
+ echo >&4 "Your modfl() is broken for large values."
+ d_modfl_pow32_bug="$define"
+ case "$foo" in
+ glibc) echo >&4 "You should upgrade your glibc to at least 2.2.2 to get a fixed modfl()."
+ ;;
+ esac
+ ;;
+ *" 4294967303.150000 0.150000 4294967303.000000")
+ echo >&4 "Your modfl() seems okay for large values."
+ ;;
+ *) echo >&4 "I don't understand your modfl() at all."
+ d_modfl="$undef"
+ ;;
+ esac
+ $rm -f try.* try core core.try.*
+ else
+ echo "I cannot figure out whether your modfl() is okay, assuming it isn't."
+ d_modfl="$undef"
+ fi
+ case "$osname:$gccversion" in
+ aix:) ccflags="$saveccflags" ;; # restore
+ esac
+ ;;
+esac
+
+case "$ccflags" in
+*-DUSE_LONG_DOUBLE*|*-DUSE_MORE_BITS*) uselongdouble="$define" ;;
+esac
+
+case "$uselongdouble" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to take advantage of long doubles which
+(if available) may give more accuracy and range for floating point numbers.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Try to use long doubles if available?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set uselongdouble
+eval $setvar
+
+case "$uselongdouble" in
+true|[yY]*) uselongdouble="$define" ;;
+esac
+
+case "$uselongdouble" in
+$define)
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that long doubles should be used,
+: we may need to set or change some other defaults.
+ if $test -f uselongdouble.cbu; then
+ echo "Your platform has some specific hints for long doubles, using them..."
+ . ./uselongdouble.cbu
+ else
+ $cat <<EOM
+(Your platform doesn't have any specific hints for long doubles.)
+EOM
+ fi
+ ;;
+esac
+
+message=X
+case "$uselongdouble:$d_sqrtl:$d_modfl" in
+$define:$define:$define)
+ : You have both
+ ;;
+$define:$define:$undef)
+ message="I could not find modfl"
+ ;;
+$define:$undef:$define)
+ message="I could not find sqrtl"
+ ;;
+$define:$undef:$undef)
+ message="I found neither sqrtl nor modfl"
+ ;;
+esac
+
+if $test "$message" != X; then
+ $cat <<EOM >&4
+
+*** You requested the use of long doubles but you do not seem to have
+*** the mathematic functions for long doubles.
+*** ($message)
+*** I'm disabling the use of long doubles.
+
+EOM
+
+ uselongdouble=$undef
+fi
+
+: determine the architecture name
+echo " "
+if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
+ tarch=`arch`"-$osname"
+elif xxx=`./loc uname blurfl $pth`; $test -f "$xxx" ; then
+ if uname -m > tmparch 2>&1 ; then
+ tarch=`$sed -e 's/ *$//' -e 's/ /_/g' \
+ -e 's/$/'"-$osname/" tmparch`
+ else
+ tarch="$osname"
+ fi
+ $rm -f tmparch
+else
+ tarch="$osname"
+fi
+case "$myarchname" in
+''|"$tarch") ;;
+*)
+ echo "(Your architecture name used to be $myarchname.)"
archname=''
;;
esac
installarchlib="$archlibexp"
fi
-
-: Binary compatibility with 5.005 is not possible for builds
-: with advanced features
-case "$usethreads$usemultiplicity" in
-*define*)
- bincompat5005="$undef"
- d_bincompat5005="$undef"
- ;;
-*) $cat <<EOM
-
-This version of Perl can be compiled for binary compatibility with 5.005.
-If you decide to do so, you will be able to continue using most of the
-extensions that were compiled for Perl 5.005.
-
-EOM
- case "$bincompat5005$d_bincompat5005" in
- *"$undef"*) dflt=n ;;
- *) dflt=y ;;
- esac
- rp='Binary compatibility with Perl 5.005?'
- . ./myread
- case "$ans" in
- y*) val="$define" ;;
- *) val="$undef" ;;
- esac
- set d_bincompat5005
- eval $setvar
- case "$d_bincompat5005" in
- "$define")
- bincompat5005="$define"
- ;;
- *) bincompat5005="$undef"
- d_bincompat5005="$undef"
- ;;
- esac
- ;;
-esac
-
-
: see if setuid scripts can be secure
$cat <<EOM
set stdlib.h i_stdlib
eval $inhdr
-: determine which malloc to compile in
+: check for void type
echo " "
-case "$usemymalloc" in
-[yY]*|true|$define) dflt='y' ;;
-[nN]*|false|$undef) dflt='n' ;;
-*) case "$ptrsize" in
- 4) dflt='y' ;;
- *) dflt='n' ;;
- esac
- ;;
-esac
-rp="Do you wish to attempt to use the malloc that comes with $package?"
-. ./myread
+echo "Checking to see how well your C compiler groks the void type..." >&4
+case "$voidflags" in
+'')
+ $cat >try.c <<'EOCP'
+#if TRY & 1
+void sub() {
+#else
+sub() {
+#endif
+ extern void moo(); /* function returning void */
+ void (*goo)(); /* ptr to func returning void */
+#if TRY & 8
+ void *hue; /* generic ptr */
+#endif
+#if TRY & 2
+ void (*foo[10])();
+#endif
+
+#if TRY & 4
+ if(goo == moo) {
+ exit(0);
+ }
+#endif
+ exit(0);
+}
+int main() { sub(); }
+EOCP
+ if $cc $ccflags -c -DTRY=$defvoidused try.c >.out 2>&1 ; then
+ voidflags=$defvoidused
+ echo "Good. It appears to support void to the level $package wants.">&4
+ if $contains warning .out >/dev/null 2>&1; then
+ echo "However, you might get some warnings that look like this:"
+ $cat .out
+ fi
+ else
+echo "Hmm, your compiler has some difficulty with void. Checking further..." >&4
+ if $cc $ccflags -c -DTRY=1 try.c >/dev/null 2>&1; then
+ echo "It supports 1..."
+ if $cc $ccflags -c -DTRY=3 try.c >/dev/null 2>&1; then
+ echo "It also supports 2..."
+ if $cc $ccflags -c -DTRY=7 try.c >/dev/null 2>&1; then
+ voidflags=7
+ echo "And it supports 4 but not 8 definitely."
+ else
+ echo "It doesn't support 4..."
+ if $cc $ccflags -c -DTRY=11 try.c >/dev/null 2>&1; then
+ voidflags=11
+ echo "But it supports 8."
+ else
+ voidflags=3
+ echo "Neither does it support 8."
+ fi
+ fi
+ else
+ echo "It does not support 2..."
+ if $cc $ccflags -c -DTRY=13 try.c >/dev/null 2>&1; then
+ voidflags=13
+ echo "But it supports 4 and 8."
+ else
+ if $cc $ccflags -c -DTRY=5 try.c >/dev/null 2>&1; then
+ voidflags=5
+ echo "And it supports 4 but has not heard about 8."
+ else
+ echo "However it supports 8 but not 4."
+ fi
+ fi
+ fi
+ else
+ echo "There is no support at all for void."
+ voidflags=0
+ fi
+ fi
+esac
+case "$voidflags" in
+"$defvoidused") ;;
+*) $cat >&4 <<'EOM'
+ Support flag bits are:
+ 1: basic void declarations.
+ 2: arrays of pointers to functions returning void.
+ 4: operations between pointers to and addresses of void functions.
+ 8: generic void pointers.
+EOM
+ dflt="$voidflags";
+ rp="Your void support flags add up to what?"
+ . ./myread
+ voidflags="$ans"
+ ;;
+esac
+$rm -f try.* .out
+
+: check for length of pointer
+echo " "
+case "$ptrsize" in
+'')
+ echo "Checking to see how big your pointers are..." >&4
+ if test "$voidflags" -gt 7; then
+ echo '#define VOID_PTR char *' > try.c
+ else
+ echo '#define VOID_PTR void *' > try.c
+ fi
+ $cat >>try.c <<'EOCP'
+#include <stdio.h>
+int main()
+{
+ printf("%d\n", (int)sizeof(VOID_PTR));
+ exit(0);
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ ptrsize=`$run ./try`
+ echo "Your pointers are $ptrsize bytes long."
+ else
+ dflt='4'
+ echo "(I can't seem to compile the test program. Guessing...)" >&4
+ rp="What is the size of a pointer (in bytes)?"
+ . ./myread
+ ptrsize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+case "$use64bitall" in
+"$define"|true|[yY]*)
+ case "$ptrsize" in
+ 4) cat <<EOM >&4
+
+*** You have chosen a maximally 64-bit build, but your pointers
+*** are only 4 bytes wide, disabling maximal 64-bitness.
+
+EOM
+ use64bitall="$undef"
+ case "$use64bitint" in
+ "$define"|true|[yY]*) ;;
+ *) cat <<EOM >&4
+
+*** Downgrading from maximal 64-bitness to using 64-bit integers.
+
+EOM
+ use64bitint="$define"
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+
+: determine which malloc to compile in
+echo " "
+case "$usemymalloc" in
+[yY]*|true|$define) dflt='y' ;;
+[nN]*|false|$undef) dflt='n' ;;
+*) case "$ptrsize" in
+ 4) dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+esac
+rp="Do you wish to attempt to use the malloc that comes with $package?"
+. ./myread
usemymalloc="$ans"
case "$ans" in
y*|true)
''|' ') dflt=none ;;
esac
case "$dflt" in
-5.005) case "$bincompat5005" in
- $define|true|[yY]*) ;;
- *) dflt=none ;;
- esac
- ;;
+5.005) dflt=none ;;
esac
-$cat <<'EOM'
+$cat <<EOM
In order to ease the process of upgrading, this version of perl
can be configured to use modules built and installed with earlier
esac
echo "The following dynamic loading files are available:"
: Can not go over to $dldir because getfile has path hard-coded in.
- tdir=`pwd`; cd $rsrc; $ls -C $dldir/dl*.xs; cd $tdir
+ tdir=`pwd`; cd "$rsrc"; $ls -C $dldir/dl*.xs; cd "$tdir"
rp="Source file to use for dynamic loading"
fn="fne"
gfpth="$src"
linux*) # ld won't link with a bare -lperl otherwise.
dflt=libperl.$so
;;
- cygwin*) # include version
- dflt=`echo libperl$version | sed -e 's/\./_/g'`$lib_ext
+ cygwin*) # ld links against an importlib
+ dflt=libperl$lib_ext
;;
*) # Try to guess based on whether libc has major.minor.
case "$libc" in
freebsd|netbsd)
xxx="-Wl,-R$shrpdir"
;;
- linux|irix*|dec_osf)
+ bsdos|linux|irix*|dec_osf)
xxx="-Wl,-rpath,$shrpdir"
;;
next)
fi
fi
fi
+case "$myhostname" in
+'') myhostname=noname ;;
+esac
: you do not want to know about this
set $myhostname
myhostname=$1
esac
case "$dflt" in
.) echo "(Lost all hope -- silly guess then)"
- dflt='.uucp'
+ dflt='.nonet'
;;
esac
$rm -f hosts
set versiononly
eval $setvar
+case "$versiononly" in
+"$define") inc_version_list=''
+ inc_version_list_init=0
+ ;;
+esac
+
: figure out how to guarantee perl startup
case "$startperl" in
'')
set qgcvt d_qgcvt
eval $inlibc
-echo " "
+: Check how to convert floats to strings.
-if $test X"$d_longdbl" = X"$define"; then
+if test "X$d_Gconvert" = X; then
-echo "Checking how to print long doubles..." >&4
+echo " "
+echo "Checking for an efficient way to convert floats to strings."
+echo " " > try.c
+case "$uselongdouble" in
+"$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_longdbl" in
+"$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
+esac
+case "$d_PRIgldbl" in
+"$define") echo "#define HAS_PRIgldbl" >>try.c ;;
+esac
+$cat >>try.c <<EOP
+#ifdef TRY_gconvert
+#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
+char *myname = "gconvert";
+#endif
+#ifdef TRY_gcvt
+#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
+char *myname = "gcvt";
+#endif
+#ifdef TRY_qgcvt
+#define Gconvert(x,n,t,b) qgcvt((x),(n),(b))
+char *myname = "qgcvt";
+#define DOUBLETYPE long double
+#endif
+#ifdef TRY_sprintf
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
+#ifdef HAS_PRIgldbl
+#define Gconvert(x,n,t,b) sprintf((b),"%.*"$sPRIgldbl,(n),(x))
+#else
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(double)(x))
+#endif
+#else
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+#endif
+char *myname = "sprintf";
+#endif
+
+#ifndef DOUBLETYPE
+#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
+#define DOUBLETYPE long double
+#else
+#define DOUBLETYPE double
+#endif
+#endif
-if $test X"$sPRIfldbl" = X -a X"$doublesize" = X"$longdblsize"; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
#include <stdio.h>
-int main() {
- double d = 123.456;
- printf("%.3f\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`$run ./try`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"f"'; sPRIgldbl='"g"'; sPRIeldbl='"e"';
- sPRIFUldbl='"F"'; sPRIGUldbl='"G"'; sPRIEUldbl='"E"';
- echo "We will use %f."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long double d = 123.456;
- printf("%.3Lf\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`$run ./try`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"Lf"'; sPRIgldbl='"Lg"'; sPRIeldbl='"Le"';
- sPRIFUldbl='"LF"'; sPRIGUldbl='"LG"'; sPRIEUldbl='"LE"';
- echo "We will use %Lf."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long double d = 123.456;
- printf("%.3llf\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`$run ./try`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"llf"'; sPRIgldbl='"llg"'; sPRIeldbl='"lle"';
- sPRIFUldbl='"llF"'; sPRIGUldbl='"llG"'; sPRIEUldbl='"llE"';
- echo "We will use %llf."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#include <stdio.h>
-int main() {
- long double d = 123.456;
- printf("%.3lf\n", d);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`$run ./try`
- case "$yyy" in
- 123.456)
- sPRIfldbl='"lf"'; sPRIgldbl='"lg"'; sPRIeldbl='"le"';
- sPRIFUldbl='"lF"'; sPRIGUldbl='"lG"'; sPRIEUldbl='"lE"';
- echo "We will use %lf."
- ;;
- esac
- fi
-fi
-
-if $test X"$sPRIfldbl" = X; then
- echo "Cannot figure out how to print long doubles." >&4
-else
- sSCNfldbl=$sPRIfldbl # expect consistency
-fi
-
-$rm -f try try.*
-
-fi # d_longdbl
-
-case "$sPRIfldbl" in
-'') d_PRIfldbl="$undef"; d_PRIgldbl="$undef"; d_PRIeldbl="$undef";
- d_PRIFUldbl="$undef"; d_PRIGUldbl="$undef"; d_PRIEUldbl="$undef";
- d_SCNfldbl="$undef";
- ;;
-*) d_PRIfldbl="$define"; d_PRIgldbl="$define"; d_PRIeldbl="$define";
- d_PRIFUldbl="$define"; d_PRIGUldbl="$define"; d_PRIEUldbl="$define";
- d_SCNfldbl="$define";
- ;;
-esac
-
-: Check how to convert floats to strings.
-echo " "
-echo "Checking for an efficient way to convert floats to strings."
-echo " " > try.c
-case "$uselongdouble" in
-"$define") echo "#define USE_LONG_DOUBLE" >>try.c ;;
-esac
-case "$d_longdbl" in
-"$define") echo "#define HAS_LONG_DOUBLE" >>try.c ;;
-esac
-case "$d_PRIgldbl" in
-"$define") echo "#define HAS_PRIgldbl" >>try.c ;;
-esac
-$cat >>try.c <<EOP
-#ifdef TRY_gconvert
-#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
-char *myname = "gconvert";
-#endif
-#ifdef TRY_gcvt
-#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
-char *myname = "gcvt";
-#endif
-#ifdef TRY_qgcvt
-#define Gconvert(x,n,t,b) qgcvt((x),(n),(b))
-char *myname = "qgcvt";
-#define DOUBLETYPE long double
-#endif
-#ifdef TRY_sprintf
-#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE) && defined(HAS_PRIgldbl)
-#define Gconvert(x,n,t,b) sprintf((b),"%.*"$sPRIgldbl,(n),(x))
-#else
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-#endif
-char *myname = "sprintf";
-#endif
-
-#ifndef DOUBLETYPE
-#if defined(USE_LONG_DOUBLE) && defined(HAS_LONG_DOUBLE)
-#define DOUBLETYPE long double
-#else
-#define DOUBLETYPE double
-#endif
-#endif
-
-#include <stdio.h>
-
-#define I_STDLIB $i_stdlib
-#ifdef I_STDLIB
-#include <stdlib.h>
-#endif
-
-int
-checkit(expect, got)
-char *expect;
-char *got;
-{
- if (strcmp(expect, got)) {
- printf("%s oddity: Expected %s, got %s\n",
- myname, expect, got);
- exit(1);
- }
+
+#define I_STDLIB $i_stdlib
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+
+int
+checkit(expect, got)
+char *expect;
+char *got;
+{
+ if (strcmp(expect, got)) {
+ printf("%s oddity: Expected %s, got %s\n",
+ myname, expect, got);
+ exit(1);
+ }
}
int main()
Gconvert((DOUBLETYPE)0.1, 8, 0, buf);
checkit("0.1", buf);
+ Gconvert((DOUBLETYPE)0.01, 8, 0, buf);
+ checkit("0.01", buf);
+
+ Gconvert((DOUBLETYPE)0.001, 8, 0, buf);
+ checkit("0.001", buf);
+
+ Gconvert((DOUBLETYPE)0.0001, 8, 0, buf);
+ checkit("0.0001", buf);
+
+ Gconvert((DOUBLETYPE)0.00009, 8, 0, buf);
+ if (strlen(buf) > 5)
+ checkit("9e-005", buf); /* for Microsoft ?? */
+ else
+ checkit("9e-05", buf);
+
Gconvert((DOUBLETYPE)1.0, 8, 0, buf);
checkit("1", buf);
Gconvert((DOUBLETYPE)123.456, 8, 0, buf);
checkit("123.456", buf);
- /* Testing of 1e+129 in bigintpm.t must not get extra '.' here. */
- Gconvert((DOUBLETYPE)1e30, 8, 0, buf);
- if (strlen(buf) > 5)
- checkit("1e+030", buf); /* for Microsoft */
- else
- checkit("1e+30", buf);
+ /* Testing of 1e+129 in bigintpm.t must not get extra '.' here. */
+ Gconvert((DOUBLETYPE)1e34, 8, 0, buf);
+ /* 34 should be enough to scare even long double
+ * places into using the e notation. */
+ if (strlen(buf) > 5)
+ checkit("1e+034", buf); /* for Microsoft */
+ else
+ checkit("1e+34", buf);
+
+ /* For Perl, if you add additional tests here, also add them to
+ * t/base/num.t for benefit of platforms not using Configure or
+ * overriding d_Gconvert */
exit(0);
}
EOP
-case "$d_Gconvert" in
-gconvert*) xxx_list='gconvert gcvt sprintf' ;;
-gcvt*) xxx_list='gcvt gconvert sprintf' ;;
-sprintf*) xxx_list='sprintf gconvert gcvt' ;;
-*) xxx_list='gconvert gcvt sprintf' ;;
-esac
-
-case "$d_longdbl$uselongdouble$d_PRIgldbl" in
-"$define$define$define")
- # for long doubles prefer first qgcvt, then sprintf
- xxx_list="`echo $xxx_list|sed s/sprintf//`"
- xxx_list="sprintf $xxx_list"
- case "$d_qgcvt" in
- "$define") xxx_list="qgcvt $xxx_list" ;;
- esac
+: first add preferred functions to our list
+xxx_list=""
+for xxx_convert in $gconvert_preference; do
+ case $xxx_convert in
+ gcvt|gconvert|sprintf) xxx_list="$xxx_list $xxx_convert" ;;
+ *) echo "Discarding unrecognized gconvert_preference $xxx_convert" >&4 ;;
+ esac
+done
+: then add any others
+for xxx_convert in gconvert gcvt sprintf; do
+ case "$xxx_list" in
+ *$xxx_convert*) ;;
+ *) xxx_list="$xxx_list $xxx_convert" ;;
+ esac
+done
+
+case "$d_longdbl$uselongdouble" in
+"$define$define")
+ : again, add prefered functions to our list first
+ xxx_ld_list=""
+ for xxx_convert in $gconvert_ld_preference; do
+ case $xxx_convert in
+ qgcvt|gcvt|gconvert|sprintf) xxx_ld_list="$xxx_ld_list $xxx_convert" ;;
+ *) echo "Discarding unrecognized gconvert_ld_preference $xxx_convert" ;;
+ esac
+ done
+ : then add qgcvt, sprintf--then, in xxx_list order, gconvert and gcvt
+ for xxx_convert in qgcvt sprintf $xxx_list; do
+ case "$xxx_ld_list" in
+ $xxx_convert*|*" $xxx_convert"*) ;;
+ *) xxx_ld_list="$xxx_ld_list $xxx_convert" ;;
+ esac
+ done
+ : if sprintf cannot do long doubles, move it to the end
+ if test "$d_PRIgldbl" != "$define"; then
+ xxx_ld_list="`echo $xxx_ld_list|sed s/sprintf//` sprintf"
+ fi
+ : if no qgcvt, remove it
+ if test "$d_qgcvt" != "$define"; then
+ xxx_ld_list="`echo $xxx_ld_list|sed s/qgcvt//`"
+ fi
+ : use the ld_list
+ xxx_list="$xxx_ld_list"
;;
esac
break;
else
echo "...But $xxx_convert didn't work as I expected."
+ xxx_convert=''
fi
else
echo "$xxx_convert NOT found." >&4
fi
done
-
+
+if test X$xxx_convert = X; then
+ echo "*** WHOA THERE!!! ***" >&4
+ echo "None of ($xxx_list) seemed to work properly. I'll use sprintf." >&4
+ xxx_convert=sprintf
+fi
+
case "$xxx_convert" in
gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
*) case "$uselongdouble$d_longdbl$d_PRIgldbl" in
"$define$define$define")
d_Gconvert="sprintf((b),\"%.*\"$sPRIgldbl,(n),(x))" ;;
+ "$define$define$undef")
+ d_Gconvert='sprintf((b),"%.*g",(n),(double)(x))' ;;
*) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
esac
;;
esac
+fi
+
: see if _fwalk exists
set fwalk d__fwalk
eval $inlibc
set accessx d_accessx
eval $inlibc
-: see if alarm exists
-set alarm d_alarm
+: see if alarm exists
+set alarm d_alarm
+eval $inlibc
+
+: see if POSIX threads are available
+set pthread.h i_pthread
+eval $inhdr
+
+: define a fucntion to check prototypes
+$cat > protochk <<EOSH
+$startsh
+cc="$cc"
+optimize="$optimize"
+ccflags="$ccflags"
+prototype="$prototype"
+define="$define"
+rm=$rm
+usethreads=$usethreads
+i_pthread=$i_pthread
+pthread_h_first=$pthread_h_first
+EOSH
+
+$cat >> protochk <<'EOSH'
+
+$rm -f try.c
+foo="$1"
+shift
+while test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>" >> try.c ;;
+ literal) echo "$2" >> try.c ;;
+ esac
+ # Extra magic for the benefit of systems that need pthread.h
+ # to be included early to correctly detect threadsafe functions.
+ # Such functions must guarantee themselves, though, that the usethreads
+ # and i_pthread have been defined, before calling protochk.
+ if test "$usethreads" = "$define" -a "$i_pthread" = "$define" -a "$pthread_h_first" = "$define" -a "$pthread_h_done" = ""; then
+ echo "#include <pthread.h>" >> try.c
+ pthread_h_done=yes
+ fi
+ shift 2
+done
+test "$prototype" = "$define" && echo '#define CAN_PROTOTYPE' >> try.c
+cat >> try.c <<'EOCP'
+#ifdef CAN_PROTOTYPE
+#define _(args) args
+#else
+#define _(args) ()
+#endif
+EOCP
+echo "$foo" >> try.c
+echo 'int no_real_function_has_this_name _((void)) { return 0; }' >> try.c
+$cc $optimize $ccflags -c try.c > /dev/null 2>&1
+status=$?
+$rm -f try.[co]
+exit $status
+EOSH
+chmod +x protochk
+$eunicefix protochk
+
+hasproto='varname=$1; func=$2; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+$cppstdin $cppflags $cppminus < try.c > tryout.c 2>/dev/null;
+if $contains "$func.*(" tryout.c >/dev/null 2>&1; then
+ echo "$func() prototype found.";
+ val="$define";
+else
+ echo "$func() prototype NOT found.";
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c tryout.c'
+
+: see if sys/types.h has to be included
+set sys/types.h i_systypes
+eval $inhdr
+
+: see if sys/select.h has to be included
+set sys/select.h i_sysselct
+eval $inhdr
+
+hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+echo "int main () { struct $struct foo; char* bar; bar = (char*)foo.$field; }" >> try.c;
+set try;
+if eval $compile; then
+ val="$define";
+else
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c try.o'
+
+: see if we should include time.h, sys/time.h, or both
+echo " "
+if test "X$timeincl" = X; then
+ echo "Testing to see if we should include <time.h>, <sys/time.h> or both." >&4
+ $echo $n "I'm now running the test program...$c"
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#ifdef I_TIME
+#include <time.h>
+#endif
+#ifdef I_SYSTIME
+#ifdef SYSTIMEKERNEL
+#define KERNEL
+#endif
+#include <sys/time.h>
+#endif
+#ifdef I_SYSSELECT
+#include <sys/select.h>
+#endif
+int main()
+{
+ struct tm foo;
+#ifdef S_TIMEVAL
+ struct timeval bar;
+#endif
+#ifdef S_TIMEZONE
+ struct timezone tzp;
+#endif
+ if (foo.tm_sec == foo.tm_sec)
+ exit(0);
+#ifdef S_TIMEVAL
+ if (bar.tv_sec == bar.tv_sec)
+ exit(0);
+#endif
+ exit(1);
+}
+EOCP
+ flags=''
+ for s_timezone in '-DS_TIMEZONE' ''; do
+ sysselect=''
+ for s_timeval in '-DS_TIMEVAL' ''; do
+ for i_systimek in '' '-DSYSTIMEKERNEL'; do
+ for i_time in '' '-DI_TIME'; do
+ for i_systime in '-DI_SYSTIME' ''; do
+ case "$flags" in
+ '') $echo $n ".$c"
+ set try $i_time $i_systime $i_systimek $sysselect $s_timeval $s_timezone
+ if eval $compile; then
+ set X $i_time $i_systime $i_systimek $sysselect $s_timeval
+ shift
+ flags="$*"
+ echo " "
+ $echo $n "Succeeded with $flags$c"
+ fi
+ ;;
+ esac
+ done
+ done
+ done
+ done
+ done
+ timeincl=''
+ echo " "
+ case "$flags" in
+ *SYSTIMEKERNEL*) i_systimek="$define"
+ timeincl=`./findhdr sys/time.h`
+ echo "We'll include <sys/time.h> with KERNEL defined." >&4;;
+ *) i_systimek="$undef";;
+ esac
+ case "$flags" in
+ *I_TIME*) i_time="$define"
+ timeincl=`./findhdr time.h`" $timeincl"
+ echo "We'll include <time.h>." >&4;;
+ *) i_time="$undef";;
+ esac
+ case "$flags" in
+ *I_SYSTIME*) i_systime="$define"
+ timeincl=`./findhdr sys/time.h`" $timeincl"
+ echo "We'll include <sys/time.h>." >&4;;
+ *) i_systime="$undef";;
+ esac
+ $rm -f try.c try
+fi
+: see if struct tm knows about tm_zone
+case "$i_systime$i_time" in
+*$define*)
+ echo " "
+ echo "Checking to see if your struct tm has tm_zone field..." >&4
+ set d_tm_tm_zone tm tm_zone $i_systime sys/time.h $i_time time.h
+ eval $hasfield
+ ;;
+*) val="$undef"
+ set d_tm_tm_zone
+ eval $setvar
+ ;;
+esac
+case "$d_tm_tm_zone" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
+esac
+: see if struct tm knows about tm_gmtoff
+case "$i_systime$i_time" in
+*$define*)
+ echo " "
+ echo "Checking to see if your struct tm has tm_gmtoff field..." >&4
+ set d_tm_tm_gmtoff tm tm_gmtoff $i_systime sys/time.h $i_time time.h
+ eval $hasfield
+ ;;
+*) val="$undef"
+ set d_tm_tm_gmtoff
+ eval $setvar
+ ;;
+esac
+case "$d_tm_tm_gmtoff" in
+"$define") echo "Yes, it does." ;;
+*) echo "No, it doesn't." ;;
+esac
+
+: see if asctime_r exists
+set asctime_r d_asctime_r
eval $inlibc
+case "$d_asctime_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_time time.h $i_systime sys/time.h"
+ case "$d_asctime_r_proto:$usethreads" in
+ ":define") d_asctime_r_proto=define
+ set d_asctime_r_proto asctime_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_asctime_r_proto" in
+ define)
+ case "$asctime_r_proto" in
+ ''|0) try='char* asctime_r(const struct tm*, char*);'
+ ./protochk "extern $try" $hdrs && asctime_r_proto=B_SB ;;
+ esac
+ case "$asctime_r_proto" in
+ ''|0) try='char* asctime_r(const struct tm*, char*, int);'
+ ./protochk "extern $try" $hdrs && asctime_r_proto=B_SBI ;;
+ esac
+ case "$asctime_r_proto" in
+ ''|0) try='int asctime_r(const struct tm*, char*);'
+ ./protochk "extern $try" $hdrs && asctime_r_proto=I_SB ;;
+ esac
+ case "$asctime_r_proto" in
+ ''|0) try='int asctime_r(const struct tm*, char*, int);'
+ ./protochk "extern $try" $hdrs && asctime_r_proto=I_SBI ;;
+ esac
+ case "$asctime_r_proto" in
+ ''|0) d_asctime_r=undef
+ asctime_r_proto=0
+ echo "Disabling asctime_r, cannot determine prototype." >&4 ;;
+ * ) case "$asctime_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) asctime_r_proto="REENTRANT_PROTO_$asctime_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "asctime_r has no prototype, not using it." >&4 ;;
+ esac
+ d_asctime_r=undef
+ asctime_r_proto=0
+ ;;
+ esac
+ ;;
+*) asctime_r_proto=0
+ ;;
+esac
: see if atolf exists
set atolf d_atolf
eval $setvar;
$rm -f try.c try.o'
-: see if sys/types.h has to be included
-set sys/types.h i_systypes
-eval $inhdr
-
-hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
-while $test $# -ge 2; do
- case "$1" in
- $define) echo "#include <$2>";;
- esac ;
- shift 2;
-done > try.c;
-echo "int main () { struct $struct foo; char* bar; bar = (char*)foo.$field; }" >> try.c;
-set try;
-if eval $compile; then
- val="$define";
-else
- val="$undef";
-fi;
-set $varname;
-eval $setvar;
-$rm -f try.c try.o'
-
socketlib=''
sockethdr=''
: see whether socket exists
;;
esac
+: see if this is a crypt.h system
+set crypt.h i_crypt
+eval $inhdr
+
+: see if crypt_r exists
+set crypt_r d_crypt_r
+eval $inlibc
+case "$d_crypt_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_crypt crypt.h"
+ case "$d_crypt_r_proto:$usethreads" in
+ ":define") d_crypt_r_proto=define
+ set d_crypt_r_proto crypt_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_crypt_r_proto" in
+ define)
+ case "$crypt_r_proto" in
+ ''|0) try='char* crypt_r(const char*, const char*, struct crypt_data*);'
+ ./protochk "extern $try" $hdrs && crypt_r_proto=B_CCS ;;
+ esac
+ case "$crypt_r_proto" in
+ ''|0) try='char* crypt_r(const char*, const char*, CRYPTD*);'
+ ./protochk "extern $try" $hdrs && crypt_r_proto=B_CCD ;;
+ esac
+ case "$crypt_r_proto" in
+ ''|0) d_crypt_r=undef
+ crypt_r_proto=0
+ echo "Disabling crypt_r, cannot determine prototype." >&4 ;;
+ * ) case "$crypt_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) crypt_r_proto="REENTRANT_PROTO_$crypt_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "crypt_r has no prototype, not using it." >&4 ;;
+ esac
+ d_crypt_r=undef
+ crypt_r_proto=0
+ ;;
+ esac
+ ;;
+*) crypt_r_proto=0
+ ;;
+esac
+
: get csh whereabouts
case "$csh" in
'csh') val="$undef" ;;
'') full_csh=$csh ;;
esac
+: see if ctermid_r exists
+set ctermid_r d_ctermid_r
+eval $inlibc
+case "$d_ctermid_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h "
+ case "$d_ctermid_r_proto:$usethreads" in
+ ":define") d_ctermid_r_proto=define
+ set d_ctermid_r_proto ctermid_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_ctermid_r_proto" in
+ define)
+ case "$ctermid_r_proto" in
+ ''|0) try='char* ctermid_r(char*);'
+ ./protochk "extern $try" $hdrs && ctermid_r_proto=B_B ;;
+ esac
+ case "$ctermid_r_proto" in
+ ''|0) d_ctermid_r=undef
+ ctermid_r_proto=0
+ echo "Disabling ctermid_r, cannot determine prototype." >&4 ;;
+ * ) case "$ctermid_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) ctermid_r_proto="REENTRANT_PROTO_$ctermid_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "ctermid_r has no prototype, not using it." >&4 ;;
+ esac
+ d_ctermid_r=undef
+ ctermid_r_proto=0
+ ;;
+ esac
+ ;;
+*) ctermid_r_proto=0
+ ;;
+esac
+
+: see if ctime_r exists
+set ctime_r d_ctime_r
+eval $inlibc
+case "$d_ctime_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_time time.h $i_systime sys/time.h"
+ case "$d_ctime_r_proto:$usethreads" in
+ ":define") d_ctime_r_proto=define
+ set d_ctime_r_proto ctime_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_ctime_r_proto" in
+ define)
+ case "$ctime_r_proto" in
+ ''|0) try='char* ctime_r(const time_t*, char*);'
+ ./protochk "extern $try" $hdrs && ctime_r_proto=B_SB ;;
+ esac
+ case "$ctime_r_proto" in
+ ''|0) try='char* ctime_r(const time_t*, char*, int);'
+ ./protochk "extern $try" $hdrs && ctime_r_proto=B_SBI ;;
+ esac
+ case "$ctime_r_proto" in
+ ''|0) try='int ctime_r(const time_t*, char*);'
+ ./protochk "extern $try" $hdrs && ctime_r_proto=I_SB ;;
+ esac
+ case "$ctime_r_proto" in
+ ''|0) try='int ctime_r(const time_t*, char*, int);'
+ ./protochk "extern $try" $hdrs && ctime_r_proto=I_SBI ;;
+ esac
+ case "$ctime_r_proto" in
+ ''|0) d_ctime_r=undef
+ ctime_r_proto=0
+ echo "Disabling ctime_r, cannot determine prototype." >&4 ;;
+ * ) case "$ctime_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) ctime_r_proto="REENTRANT_PROTO_$ctime_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "ctime_r has no prototype, not using it." >&4 ;;
+ esac
+ d_ctime_r=undef
+ ctime_r_proto=0
+ ;;
+ esac
+ ;;
+*) ctime_r_proto=0
+ ;;
+esac
+
: see if cuserid exists
set cuserid d_cuserid
eval $inlibc
set d_dbl_dig
eval $setvar
-hasproto='varname=$1; func=$2; shift; shift;
-while $test $# -ge 2; do
- case "$1" in
- $define) echo "#include <$2>";;
- esac ;
- shift 2;
-done > try.c;
-$cppstdin $cppflags $cppminus < try.c > tryout.c 2>/dev/null;
-if $contains "$func.*(" tryout.c >/dev/null 2>&1; then
- echo "$func() prototype found.";
- val="$define";
-else
- echo "$func() prototype NOT found.";
- val="$undef";
-fi;
-set $varname;
-eval $setvar;
-$rm -f try.c tryout.c'
-
: see if dbm.h is available
: see if dbmclose exists
set dbmclose d_dbmclose
4) echo "dlsym doesn't need a leading underscore." >&4;;
esac
else
- echo "I can't compile and run the test program." >&4
- echo "I'm guessing that dlsym doesn't need a leading underscore." >&4
+ echo "I can't compile and run the test program." >&4
+ echo "I'm guessing that dlsym doesn't need a leading underscore." >&4
+ fi
+ ;;
+esac
+
+$rm -f fred fred.* dyna.$dlext dyna.* tmp-dyna.*
+
+set d_dlsymun
+eval $setvar
+
+: see if drand48_r exists
+set drand48_r d_drand48_r
+eval $inlibc
+case "$d_drand48_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_stdlib stdlib.h"
+ case "$d_drand48_r_proto:$usethreads" in
+ ":define") d_drand48_r_proto=define
+ set d_drand48_r_proto drand48_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_drand48_r_proto" in
+ define)
+ case "$drand48_r_proto" in
+ ''|0) try='int drand48_r(struct drand48_data*, double*);'
+ ./protochk "extern $try" $hdrs && drand48_r_proto=I_ST ;;
+ esac
+ case "$drand48_r_proto" in
+ ''|0) d_drand48_r=undef
+ drand48_r_proto=0
+ echo "Disabling drand48_r, cannot determine prototype." >&4 ;;
+ * ) case "$drand48_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) drand48_r_proto="REENTRANT_PROTO_$drand48_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "drand48_r has no prototype, not using it." >&4 ;;
+ esac
+ d_drand48_r=undef
+ drand48_r_proto=0
+ ;;
+ esac
+ ;;
+*) drand48_r_proto=0
+ ;;
+esac
+
+: see if prototype for drand48 is available
+echo " "
+set d_drand48proto drand48 $i_stdlib stdlib.h $i_unistd unistd.h
+eval $hasproto
+
+: see if dup2 exists
+set dup2 d_dup2
+eval $inlibc
+
+: see if eaccess exists
+set eaccess d_eaccess
+eval $inlibc
+
+: see if endgrent exists
+set endgrent d_endgrent
+eval $inlibc
+
+: see if this is an grp system
+set grp.h i_grp
+eval $inhdr
+
+case "$i_grp" in
+$define)
+ xxx=`./findhdr grp.h`
+ $cppstdin $cppflags $cppminus < $xxx >$$.h
+
+ if $contains 'gr_passwd' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_grpasswd
+ eval $setvar
+
+ $rm -f $$.h
+ ;;
+*)
+ val="$undef";
+ set d_grpasswd; eval $setvar
+ ;;
+esac
+
+: see if endgrent_r exists
+set endgrent_r d_endgrent_r
+eval $inlibc
+case "$d_endgrent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_grp grp.h"
+ case "$d_endgrent_r_proto:$usethreads" in
+ ":define") d_endgrent_r_proto=define
+ set d_endgrent_r_proto endgrent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_endgrent_r_proto" in
+ define)
+ case "$endgrent_r_proto" in
+ ''|0) try='int endgrent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && endgrent_r_proto=I_H ;;
+ esac
+ case "$endgrent_r_proto" in
+ ''|0) try='void endgrent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && endgrent_r_proto=V_H ;;
+ esac
+ case "$endgrent_r_proto" in
+ ''|0) d_endgrent_r=undef
+ endgrent_r_proto=0
+ echo "Disabling endgrent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endgrent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) endgrent_r_proto="REENTRANT_PROTO_$endgrent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "endgrent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_endgrent_r=undef
+ endgrent_r_proto=0
+ ;;
+ esac
+ ;;
+*) endgrent_r_proto=0
+ ;;
+esac
+
+: see if endhostent exists
+set endhostent d_endhent
+eval $inlibc
+
+: see if this is a netdb.h system
+set netdb.h i_netdb
+eval $inhdr
+
+: see if endhostent_r exists
+set endhostent_r d_endhostent_r
+eval $inlibc
+case "$d_endhostent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_endhostent_r_proto:$usethreads" in
+ ":define") d_endhostent_r_proto=define
+ set d_endhostent_r_proto endhostent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_endhostent_r_proto" in
+ define)
+ case "$endhostent_r_proto" in
+ ''|0) try='int endhostent_r(struct hostent_data*);'
+ ./protochk "extern $try" $hdrs && endhostent_r_proto=I_D ;;
+ esac
+ case "$endhostent_r_proto" in
+ ''|0) try='void endhostent_r(struct hostent_data*);'
+ ./protochk "extern $try" $hdrs && endhostent_r_proto=V_D ;;
+ esac
+ case "$endhostent_r_proto" in
+ ''|0) d_endhostent_r=undef
+ endhostent_r_proto=0
+ echo "Disabling endhostent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endhostent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) endhostent_r_proto="REENTRANT_PROTO_$endhostent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "endhostent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_endhostent_r=undef
+ endhostent_r_proto=0
+ ;;
+ esac
+ ;;
+*) endhostent_r_proto=0
+ ;;
+esac
+
+: see if endnetent exists
+set endnetent d_endnent
+eval $inlibc
+
+: see if endnetent_r exists
+set endnetent_r d_endnetent_r
+eval $inlibc
+case "$d_endnetent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_endnetent_r_proto:$usethreads" in
+ ":define") d_endnetent_r_proto=define
+ set d_endnetent_r_proto endnetent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_endnetent_r_proto" in
+ define)
+ case "$endnetent_r_proto" in
+ ''|0) try='int endnetent_r(struct netent_data*);'
+ ./protochk "extern $try" $hdrs && endnetent_r_proto=I_D ;;
+ esac
+ case "$endnetent_r_proto" in
+ ''|0) try='void endnetent_r(struct netent_data*);'
+ ./protochk "extern $try" $hdrs && endnetent_r_proto=V_D ;;
+ esac
+ case "$endnetent_r_proto" in
+ ''|0) d_endnetent_r=undef
+ endnetent_r_proto=0
+ echo "Disabling endnetent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endnetent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) endnetent_r_proto="REENTRANT_PROTO_$endnetent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "endnetent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_endnetent_r=undef
+ endnetent_r_proto=0
+ ;;
+ esac
+ ;;
+*) endnetent_r_proto=0
+ ;;
+esac
+
+: see if endprotoent exists
+set endprotoent d_endpent
+eval $inlibc
+
+: see if endprotoent_r exists
+set endprotoent_r d_endprotoent_r
+eval $inlibc
+case "$d_endprotoent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_endprotoent_r_proto:$usethreads" in
+ ":define") d_endprotoent_r_proto=define
+ set d_endprotoent_r_proto endprotoent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_endprotoent_r_proto" in
+ define)
+ case "$endprotoent_r_proto" in
+ ''|0) try='int endprotoent_r(struct protoent_data*);'
+ ./protochk "extern $try" $hdrs && endprotoent_r_proto=I_D ;;
+ esac
+ case "$endprotoent_r_proto" in
+ ''|0) try='void endprotoent_r(struct protoent_data*);'
+ ./protochk "extern $try" $hdrs && endprotoent_r_proto=V_D ;;
+ esac
+ case "$endprotoent_r_proto" in
+ ''|0) d_endprotoent_r=undef
+ endprotoent_r_proto=0
+ echo "Disabling endprotoent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endprotoent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) endprotoent_r_proto="REENTRANT_PROTO_$endprotoent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "endprotoent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_endprotoent_r=undef
+ endprotoent_r_proto=0
+ ;;
+ esac
+ ;;
+*) endprotoent_r_proto=0
+ ;;
+esac
+
+: see if endpwent exists
+set endpwent d_endpwent
+eval $inlibc
+
+: see if this is a pwd.h system
+set pwd.h i_pwd
+eval $inhdr
+
+case "$i_pwd" in
+$define)
+ xxx=`./findhdr pwd.h`
+ $cppstdin $cppflags $cppminus < $xxx >$$.h
+
+ if $contains 'pw_quota' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
fi
- ;;
-esac
-
-$rm -f fred fred.* dyna.$dlext dyna.* tmp-dyna.*
+ set d_pwquota
+ eval $setvar
-set d_dlsymun
-eval $setvar
+ if $contains 'pw_age' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwage
+ eval $setvar
-: see if prototype for drand48 is available
-echo " "
-set d_drand48proto drand48 $i_stdlib stdlib.h $i_unistd unistd.h
-eval $hasproto
+ if $contains 'pw_change' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwchange
+ eval $setvar
-: see if dup2 exists
-set dup2 d_dup2
-eval $inlibc
+ if $contains 'pw_class' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwclass
+ eval $setvar
-: see if eaccess exists
-set eaccess d_eaccess
-eval $inlibc
+ if $contains 'pw_expire' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwexpire
+ eval $setvar
-: see if endgrent exists
-set endgrent d_endgrent
-eval $inlibc
+ if $contains 'pw_comment' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwcomment
+ eval $setvar
-: see if endhostent exists
-set endhostent d_endhent
-eval $inlibc
+ if $contains 'pw_gecos' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwgecos
+ eval $setvar
-: see if endnetent exists
-set endnetent d_endnent
-eval $inlibc
+ if $contains 'pw_passwd' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwpasswd
+ eval $setvar
-: see if endprotoent exists
-set endprotoent d_endpent
-eval $inlibc
+ $rm -f $$.h
+ ;;
+*)
+ val="$undef";
+ set d_pwquota; eval $setvar
+ set d_pwage; eval $setvar
+ set d_pwchange; eval $setvar
+ set d_pwclass; eval $setvar
+ set d_pwexpire; eval $setvar
+ set d_pwcomment; eval $setvar
+ set d_pwgecos; eval $setvar
+ set d_pwpasswd; eval $setvar
+ ;;
+esac
-: see if endpwent exists
-set endpwent d_endpwent
+: see if endpwent_r exists
+set endpwent_r d_endpwent_r
eval $inlibc
+case "$d_endpwent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_pwd pwd.h"
+ case "$d_endpwent_r_proto:$usethreads" in
+ ":define") d_endpwent_r_proto=define
+ set d_endpwent_r_proto endpwent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_endpwent_r_proto" in
+ define)
+ case "$endpwent_r_proto" in
+ ''|0) try='int endpwent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && endpwent_r_proto=I_H ;;
+ esac
+ case "$endpwent_r_proto" in
+ ''|0) try='void endpwent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && endpwent_r_proto=V_H ;;
+ esac
+ case "$endpwent_r_proto" in
+ ''|0) d_endpwent_r=undef
+ endpwent_r_proto=0
+ echo "Disabling endpwent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endpwent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) endpwent_r_proto="REENTRANT_PROTO_$endpwent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "endpwent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_endpwent_r=undef
+ endpwent_r_proto=0
+ ;;
+ esac
+ ;;
+*) endpwent_r_proto=0
+ ;;
+esac
: see if endservent exists
set endservent d_endsent
eval $inlibc
+: see if endservent_r exists
+set endservent_r d_endservent_r
+eval $inlibc
+case "$d_endservent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_endservent_r_proto:$usethreads" in
+ ":define") d_endservent_r_proto=define
+ set d_endservent_r_proto endservent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_endservent_r_proto" in
+ define)
+ case "$endservent_r_proto" in
+ ''|0) try='int endservent_r(struct servent_data*);'
+ ./protochk "extern $try" $hdrs && endservent_r_proto=I_D ;;
+ esac
+ case "$endservent_r_proto" in
+ ''|0) try='void endservent_r(struct servent_data*);'
+ ./protochk "extern $try" $hdrs && endservent_r_proto=V_D ;;
+ esac
+ case "$endservent_r_proto" in
+ ''|0) d_endservent_r=undef
+ endservent_r_proto=0
+ echo "Disabling endservent_r, cannot determine prototype." >&4 ;;
+ * ) case "$endservent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) endservent_r_proto="REENTRANT_PROTO_$endservent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "endservent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_endservent_r=undef
+ endservent_r_proto=0
+ ;;
+ esac
+ ;;
+*) endservent_r_proto=0
+ ;;
+esac
+
: Locate the flags for 'open()'
echo " "
$cat >try.c <<'EOCP'
$rm -f try*
-: see if sys/select.h has to be included
-set sys/select.h i_sysselct
-eval $inhdr
-
-: see if we should include time.h, sys/time.h, or both
-echo " "
-if test "X$timeincl" = X; then
- echo "Testing to see if we should include <time.h>, <sys/time.h> or both." >&4
- $echo $n "I'm now running the test program...$c"
- $cat >try.c <<'EOCP'
-#include <sys/types.h>
-#ifdef I_TIME
-#include <time.h>
-#endif
-#ifdef I_SYSTIME
-#ifdef SYSTIMEKERNEL
-#define KERNEL
-#endif
-#include <sys/time.h>
-#endif
-#ifdef I_SYSSELECT
-#include <sys/select.h>
-#endif
-int main()
-{
- struct tm foo;
-#ifdef S_TIMEVAL
- struct timeval bar;
-#endif
-#ifdef S_TIMEZONE
- struct timezone tzp;
-#endif
- if (foo.tm_sec == foo.tm_sec)
- exit(0);
-#ifdef S_TIMEVAL
- if (bar.tv_sec == bar.tv_sec)
- exit(0);
-#endif
- exit(1);
-}
-EOCP
- flags=''
- for s_timezone in '-DS_TIMEZONE' ''; do
- sysselect=''
- for s_timeval in '-DS_TIMEVAL' ''; do
- for i_systimek in '' '-DSYSTIMEKERNEL'; do
- for i_time in '' '-DI_TIME'; do
- for i_systime in '-DI_SYSTIME' ''; do
- case "$flags" in
- '') $echo $n ".$c"
- set try $i_time $i_systime $i_systimek $sysselect $s_timeval $s_timezone
- if eval $compile; then
- set X $i_time $i_systime $i_systimek $sysselect $s_timeval
- shift
- flags="$*"
- echo " "
- $echo $n "Succeeded with $flags$c"
- fi
- ;;
- esac
- done
- done
- done
- done
- done
- timeincl=''
- echo " "
- case "$flags" in
- *SYSTIMEKERNEL*) i_systimek="$define"
- timeincl=`./findhdr sys/time.h`
- echo "We'll include <sys/time.h> with KERNEL defined." >&4;;
- *) i_systimek="$undef";;
- esac
- case "$flags" in
- *I_TIME*) i_time="$define"
- timeincl=`./findhdr time.h`" $timeincl"
- echo "We'll include <time.h>." >&4;;
- *) i_time="$undef";;
- esac
- case "$flags" in
- *I_SYSTIME*) i_systime="$define"
- timeincl=`./findhdr sys/time.h`" $timeincl"
- echo "We'll include <sys/time.h>." >&4;;
- *) i_systime="$undef";;
- esac
- $rm -f try.c try
-fi
-
: check for fd_set items
$cat <<EOM
8) echo "(Your long is 64 bits, so you could use ftell.)" ;;
esac
-: see if getcwd exists
-set getcwd d_getcwd
-eval $inlibc
-
-: see if getespwnam exists
-set getespwnam d_getespwnam
-eval $inlibc
-
-
-: see if getfsstat exists
-set getfsstat d_getfsstat
+: see if getcwd exists
+set getcwd d_getcwd
+eval $inlibc
+
+: see if getespwnam exists
+set getespwnam d_getespwnam
+eval $inlibc
+
+
+: see if getfsstat exists
+set getfsstat d_getfsstat
+eval $inlibc
+
+: see if getgrent exists
+set getgrent d_getgrent
+eval $inlibc
+
+: see if getgrent_r exists
+set getgrent_r d_getgrent_r
+eval $inlibc
+case "$d_getgrent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_grp grp.h"
+ case "$d_getgrent_r_proto:$usethreads" in
+ ":define") d_getgrent_r_proto=define
+ set d_getgrent_r_proto getgrent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getgrent_r_proto" in
+ define)
+ case "$getgrent_r_proto" in
+ ''|0) try='int getgrent_r(struct group*, char*, size_t, struct group**);'
+ ./protochk "extern $try" $hdrs && getgrent_r_proto=I_SBWR ;;
+ esac
+ case "$getgrent_r_proto" in
+ ''|0) try='int getgrent_r(struct group*, char*, int, struct group**);'
+ ./protochk "extern $try" $hdrs && getgrent_r_proto=I_SBIR ;;
+ esac
+ case "$getgrent_r_proto" in
+ ''|0) try='struct group* getgrent_r(struct group*, char*, size_t);'
+ ./protochk "extern $try" $hdrs && getgrent_r_proto=S_SBW ;;
+ esac
+ case "$getgrent_r_proto" in
+ ''|0) try='struct group* getgrent_r(struct group*, char*, int);'
+ ./protochk "extern $try" $hdrs && getgrent_r_proto=S_SBI ;;
+ esac
+ case "$getgrent_r_proto" in
+ ''|0) try='int getgrent_r(struct group*, char*, int);'
+ ./protochk "extern $try" $hdrs && getgrent_r_proto=I_SBI ;;
+ esac
+ case "$getgrent_r_proto" in
+ ''|0) try='int getgrent_r(struct group*, char*, int, FILE**);'
+ ./protochk "extern $try" $hdrs && getgrent_r_proto=I_SBIH ;;
+ esac
+ case "$getgrent_r_proto" in
+ ''|0) d_getgrent_r=undef
+ getgrent_r_proto=0
+ echo "Disabling getgrent_r, cannot determine prototype." >&4 ;;
+ * ) case "$getgrent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getgrent_r_proto="REENTRANT_PROTO_$getgrent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getgrent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getgrent_r=undef
+ getgrent_r_proto=0
+ ;;
+ esac
+ ;;
+*) getgrent_r_proto=0
+ ;;
+esac
+
+: see if getgrgid_r exists
+set getgrgid_r d_getgrgid_r
eval $inlibc
+case "$d_getgrgid_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_grp grp.h"
+ case "$d_getgrgid_r_proto:$usethreads" in
+ ":define") d_getgrgid_r_proto=define
+ set d_getgrgid_r_proto getgrgid_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getgrgid_r_proto" in
+ define)
+ case "$getgrgid_r_proto" in
+ ''|0) try='int getgrgid_r(gid_t, struct group*, char*, size_t, struct group**);'
+ ./protochk "extern $try" $hdrs && getgrgid_r_proto=I_TSBWR ;;
+ esac
+ case "$getgrgid_r_proto" in
+ ''|0) try='int getgrgid_r(gid_t, struct group*, char*, int, struct group**);'
+ ./protochk "extern $try" $hdrs && getgrgid_r_proto=I_TSBIR ;;
+ esac
+ case "$getgrgid_r_proto" in
+ ''|0) try='int getgrgid_r(gid_t, struct group*, char*, int);'
+ ./protochk "extern $try" $hdrs && getgrgid_r_proto=I_TSBI ;;
+ esac
+ case "$getgrgid_r_proto" in
+ ''|0) try='struct group* getgrgid_r(gid_t, struct group*, char*, int);'
+ ./protochk "extern $try" $hdrs && getgrgid_r_proto=S_TSBI ;;
+ esac
+ case "$getgrgid_r_proto" in
+ ''|0) d_getgrgid_r=undef
+ getgrgid_r_proto=0
+ echo "Disabling getgrgid_r, cannot determine prototype." >&4 ;;
+ * ) case "$getgrgid_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getgrgid_r_proto="REENTRANT_PROTO_$getgrgid_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getgrgid_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getgrgid_r=undef
+ getgrgid_r_proto=0
+ ;;
+ esac
+ ;;
+*) getgrgid_r_proto=0
+ ;;
+esac
-: see if getgrent exists
-set getgrent d_getgrent
+: see if getgrnam_r exists
+set getgrnam_r d_getgrnam_r
eval $inlibc
+case "$d_getgrnam_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_grp grp.h"
+ case "$d_getgrnam_r_proto:$usethreads" in
+ ":define") d_getgrnam_r_proto=define
+ set d_getgrnam_r_proto getgrnam_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getgrnam_r_proto" in
+ define)
+ case "$getgrnam_r_proto" in
+ ''|0) try='int getgrnam_r(const char*, struct group*, char*, size_t, struct group**);'
+ ./protochk "extern $try" $hdrs && getgrnam_r_proto=I_CSBWR ;;
+ esac
+ case "$getgrnam_r_proto" in
+ ''|0) try='int getgrnam_r(const char*, struct group*, char*, int, struct group**);'
+ ./protochk "extern $try" $hdrs && getgrnam_r_proto=I_CSBIR ;;
+ esac
+ case "$getgrnam_r_proto" in
+ ''|0) try='struct group* getgrnam_r(const char*, char*, int);'
+ ./protochk "extern $try" $hdrs && getgrnam_r_proto=S_CBI ;;
+ esac
+ case "$getgrnam_r_proto" in
+ ''|0) try='int getgrnam_r(const char*, struct group*, char*, int);'
+ ./protochk "extern $try" $hdrs && getgrnam_r_proto=I_CSBI ;;
+ esac
+ case "$getgrnam_r_proto" in
+ ''|0) try='struct group* getgrnam_r(const char*, struct group*, char*, int);'
+ ./protochk "extern $try" $hdrs && getgrnam_r_proto=S_CSBI ;;
+ esac
+ case "$getgrnam_r_proto" in
+ ''|0) d_getgrnam_r=undef
+ getgrnam_r_proto=0
+ echo "Disabling getgrnam_r, cannot determine prototype." >&4 ;;
+ * ) case "$getgrnam_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getgrnam_r_proto="REENTRANT_PROTO_$getgrnam_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getgrnam_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getgrnam_r=undef
+ getgrnam_r_proto=0
+ ;;
+ esac
+ ;;
+*) getgrnam_r_proto=0
+ ;;
+esac
: see if gethostbyaddr exists
set gethostbyaddr d_gethbyaddr
'') d_phostname="$undef";;
esac
-: see if this is a netdb.h system
-set netdb.h i_netdb
-eval $inhdr
+: see if gethostbyaddr_r exists
+set gethostbyaddr_r d_gethostbyaddr_r
+eval $inlibc
+case "$d_gethostbyaddr_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_gethostbyaddr_r_proto:$usethreads" in
+ ":define") d_gethostbyaddr_r_proto=define
+ set d_gethostbyaddr_r_proto gethostbyaddr_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_gethostbyaddr_r_proto" in
+ define)
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='int gethostbyaddr_r(const char*, size_t, int, struct hostent*, char*, size_t, struct hostent**, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=I_CWISBWRE ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='struct hostent* gethostbyaddr_r(const char*, size_t, int, struct hostent*, char*, size_t, int, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=S_CWISBWIE ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='struct hostent* gethostbyaddr_r(const char*, size_t, int, struct hostent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=S_CWISBIE ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='struct hostent* gethostbyaddr_r(const void*, size_t, int, struct hostent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=S_TWISBIE ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='struct hostent* gethostbyaddr_r(const char*, int, int, struct hostent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=S_CIISBIE ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='struct hostent* gethostbyaddr_r(const char*, struct hostent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=S_CSBIE ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='struct hostent* gethostbyaddr_r(const void*, struct hostent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=S_TSBIE ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='int gethostbyaddr_r(const char*, size_t, int, struct hostent*, struct hostent_data*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=I_CWISD ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='int gethostbyaddr_r(const char*, int, int, struct hostent*, struct hostent_data*);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=I_CIISD ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) try='int gethostbyaddr_r(const char*, int, int);'
+ ./protochk "extern $try" $hdrs && gethostbyaddr_r_proto=I_CII ;;
+ esac
+ case "$gethostbyaddr_r_proto" in
+ ''|0) d_gethostbyaddr_r=undef
+ gethostbyaddr_r_proto=0
+ echo "Disabling gethostbyaddr_r, cannot determine prototype." >&4 ;;
+ * ) case "$gethostbyaddr_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) gethostbyaddr_r_proto="REENTRANT_PROTO_$gethostbyaddr_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "gethostbyaddr_r has no prototype, not using it." >&4 ;;
+ esac
+ d_gethostbyaddr_r=undef
+ gethostbyaddr_r_proto=0
+ ;;
+ esac
+ ;;
+*) gethostbyaddr_r_proto=0
+ ;;
+esac
+
+: see if gethostbyname_r exists
+set gethostbyname_r d_gethostbyname_r
+eval $inlibc
+case "$d_gethostbyname_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_gethostbyname_r_proto:$usethreads" in
+ ":define") d_gethostbyname_r_proto=define
+ set d_gethostbyname_r_proto gethostbyname_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_gethostbyname_r_proto" in
+ define)
+ case "$gethostbyname_r_proto" in
+ ''|0) try='int gethostbyname_r(const char*, struct hostent*, char*, size_t, struct hostent**, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyname_r_proto=I_CSBWRE ;;
+ esac
+ case "$gethostbyname_r_proto" in
+ ''|0) try='struct hostent* gethostbyname_r(const char*, struct hostent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && gethostbyname_r_proto=S_CSBIE ;;
+ esac
+ case "$gethostbyname_r_proto" in
+ ''|0) try='int gethostbyname_r(const char*, struct hostent*, struct hostent_data*);'
+ ./protochk "extern $try" $hdrs && gethostbyname_r_proto=I_CSD ;;
+ esac
+ case "$gethostbyname_r_proto" in
+ ''|0) d_gethostbyname_r=undef
+ gethostbyname_r_proto=0
+ echo "Disabling gethostbyname_r, cannot determine prototype." >&4 ;;
+ * ) case "$gethostbyname_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) gethostbyname_r_proto="REENTRANT_PROTO_$gethostbyname_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "gethostbyname_r has no prototype, not using it." >&4 ;;
+ esac
+ d_gethostbyname_r=undef
+ gethostbyname_r_proto=0
+ ;;
+ esac
+ ;;
+*) gethostbyname_r_proto=0
+ ;;
+esac
+
+: see if gethostent_r exists
+set gethostent_r d_gethostent_r
+eval $inlibc
+case "$d_gethostent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_gethostent_r_proto:$usethreads" in
+ ":define") d_gethostent_r_proto=define
+ set d_gethostent_r_proto gethostent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_gethostent_r_proto" in
+ define)
+ case "$gethostent_r_proto" in
+ ''|0) try='int gethostent_r(struct hostent*, char*, size_t, struct hostent**, int*);'
+ ./protochk "extern $try" $hdrs && gethostent_r_proto=I_SBWRE ;;
+ esac
+ case "$gethostent_r_proto" in
+ ''|0) try='int gethostent_r(struct hostent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && gethostent_r_proto=I_SBIE ;;
+ esac
+ case "$gethostent_r_proto" in
+ ''|0) try='struct hostent* gethostent_r(struct hostent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && gethostent_r_proto=S_SBIE ;;
+ esac
+ case "$gethostent_r_proto" in
+ ''|0) try='struct hostent* gethostent_r(struct hostent*, char*, int);'
+ ./protochk "extern $try" $hdrs && gethostent_r_proto=S_SBI ;;
+ esac
+ case "$gethostent_r_proto" in
+ ''|0) try='int gethostent_r(struct hostent*, char*, int);'
+ ./protochk "extern $try" $hdrs && gethostent_r_proto=I_SBI ;;
+ esac
+ case "$gethostent_r_proto" in
+ ''|0) try='int gethostent_r(struct hostent*, struct hostent_data*);'
+ ./protochk "extern $try" $hdrs && gethostent_r_proto=I_SD ;;
+ esac
+ case "$gethostent_r_proto" in
+ ''|0) d_gethostent_r=undef
+ gethostent_r_proto=0
+ echo "Disabling gethostent_r, cannot determine prototype." >&4 ;;
+ * ) case "$gethostent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) gethostent_r_proto="REENTRANT_PROTO_$gethostent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "gethostent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_gethostent_r=undef
+ gethostent_r_proto=0
+ ;;
+ esac
+ ;;
+*) gethostent_r_proto=0
+ ;;
+esac
: see if prototypes for various gethostxxx netdb.h functions are available
echo " "
set getlogin d_getlogin
eval $inlibc
+: see if getlogin_r exists
+set getlogin_r d_getlogin_r
+eval $inlibc
+case "$d_getlogin_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_unistd unistd.h"
+ case "$d_getlogin_r_proto:$usethreads" in
+ ":define") d_getlogin_r_proto=define
+ set d_getlogin_r_proto getlogin_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getlogin_r_proto" in
+ define)
+ case "$getlogin_r_proto" in
+ ''|0) try='int getlogin_r(char*, size_t);'
+ ./protochk "extern $try" $hdrs && getlogin_r_proto=I_BW ;;
+ esac
+ case "$getlogin_r_proto" in
+ ''|0) try='int getlogin_r(char*, int);'
+ ./protochk "extern $try" $hdrs && getlogin_r_proto=I_BI ;;
+ esac
+ case "$getlogin_r_proto" in
+ ''|0) try='char* getlogin_r(char*, size_t);'
+ ./protochk "extern $try" $hdrs && getlogin_r_proto=B_BW ;;
+ esac
+ case "$getlogin_r_proto" in
+ ''|0) try='char* getlogin_r(char*, int);'
+ ./protochk "extern $try" $hdrs && getlogin_r_proto=B_BI ;;
+ esac
+ case "$getlogin_r_proto" in
+ ''|0) d_getlogin_r=undef
+ getlogin_r_proto=0
+ echo "Disabling getlogin_r, cannot determine prototype." >&4 ;;
+ * ) case "$getlogin_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getlogin_r_proto="REENTRANT_PROTO_$getlogin_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getlogin_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getlogin_r=undef
+ getlogin_r_proto=0
+ ;;
+ esac
+ ;;
+*) getlogin_r_proto=0
+ ;;
+esac
+
: see if getmnt exists
set getmnt d_getmnt
eval $inlibc
set getnetent d_getnent
eval $inlibc
+: see if getnetbyaddr_r exists
+set getnetbyaddr_r d_getnetbyaddr_r
+eval $inlibc
+case "$d_getnetbyaddr_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_getnetbyaddr_r_proto:$usethreads" in
+ ":define") d_getnetbyaddr_r_proto=define
+ set d_getnetbyaddr_r_proto getnetbyaddr_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getnetbyaddr_r_proto" in
+ define)
+ case "$getnetbyaddr_r_proto" in
+ ''|0) try='int getnetbyaddr_r(unsigned long, int, struct netent*, char*, size_t, struct netent**, int*);'
+ ./protochk "extern $try" $hdrs && getnetbyaddr_r_proto=I_UISBWRE ;;
+ esac
+ case "$getnetbyaddr_r_proto" in
+ ''|0) try='int getnetbyaddr_r(long, int, struct netent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getnetbyaddr_r_proto=I_LISBI ;;
+ esac
+ case "$getnetbyaddr_r_proto" in
+ ''|0) try='struct netent* getnetbyaddr_r(in_addr_t, int, struct netent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getnetbyaddr_r_proto=S_TISBI ;;
+ esac
+ case "$getnetbyaddr_r_proto" in
+ ''|0) try='struct netent* getnetbyaddr_r(long, int, struct netent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getnetbyaddr_r_proto=S_LISBI ;;
+ esac
+ case "$getnetbyaddr_r_proto" in
+ ''|0) try='int getnetbyaddr_r(in_addr_t, int, struct netent*, struct netent_data*);'
+ ./protochk "extern $try" $hdrs && getnetbyaddr_r_proto=I_TISD ;;
+ esac
+ case "$getnetbyaddr_r_proto" in
+ ''|0) try='int getnetbyaddr_r(long, int, struct netent*, struct netent_data*);'
+ ./protochk "extern $try" $hdrs && getnetbyaddr_r_proto=I_LISD ;;
+ esac
+ case "$getnetbyaddr_r_proto" in
+ ''|0) try='int getnetbyaddr_r(int, int, struct netent*, struct netent_data*);'
+ ./protochk "extern $try" $hdrs && getnetbyaddr_r_proto=I_IISD ;;
+ esac
+ case "$getnetbyaddr_r_proto" in
+ ''|0) d_getnetbyaddr_r=undef
+ getnetbyaddr_r_proto=0
+ echo "Disabling getnetbyaddr_r, cannot determine prototype." >&4 ;;
+ * ) case "$getnetbyaddr_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getnetbyaddr_r_proto="REENTRANT_PROTO_$getnetbyaddr_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getnetbyaddr_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getnetbyaddr_r=undef
+ getnetbyaddr_r_proto=0
+ ;;
+ esac
+ ;;
+*) getnetbyaddr_r_proto=0
+ ;;
+esac
+
+: see if getnetbyname_r exists
+set getnetbyname_r d_getnetbyname_r
+eval $inlibc
+case "$d_getnetbyname_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_getnetbyname_r_proto:$usethreads" in
+ ":define") d_getnetbyname_r_proto=define
+ set d_getnetbyname_r_proto getnetbyname_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getnetbyname_r_proto" in
+ define)
+ case "$getnetbyname_r_proto" in
+ ''|0) try='int getnetbyname_r(const char*, struct netent*, char*, size_t, struct netent**, int*);'
+ ./protochk "extern $try" $hdrs && getnetbyname_r_proto=I_CSBWRE ;;
+ esac
+ case "$getnetbyname_r_proto" in
+ ''|0) try='int getnetbyname_r(const char*, struct netent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getnetbyname_r_proto=I_CSBI ;;
+ esac
+ case "$getnetbyname_r_proto" in
+ ''|0) try='struct netent* getnetbyname_r(const char*, struct netent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getnetbyname_r_proto=S_CSBI ;;
+ esac
+ case "$getnetbyname_r_proto" in
+ ''|0) try='int getnetbyname_r(const char*, struct netent*, struct netent_data*);'
+ ./protochk "extern $try" $hdrs && getnetbyname_r_proto=I_CSD ;;
+ esac
+ case "$getnetbyname_r_proto" in
+ ''|0) d_getnetbyname_r=undef
+ getnetbyname_r_proto=0
+ echo "Disabling getnetbyname_r, cannot determine prototype." >&4 ;;
+ * ) case "$getnetbyname_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getnetbyname_r_proto="REENTRANT_PROTO_$getnetbyname_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getnetbyname_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getnetbyname_r=undef
+ getnetbyname_r_proto=0
+ ;;
+ esac
+ ;;
+*) getnetbyname_r_proto=0
+ ;;
+esac
+
+: see if getnetent_r exists
+set getnetent_r d_getnetent_r
+eval $inlibc
+case "$d_getnetent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_getnetent_r_proto:$usethreads" in
+ ":define") d_getnetent_r_proto=define
+ set d_getnetent_r_proto getnetent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getnetent_r_proto" in
+ define)
+ case "$getnetent_r_proto" in
+ ''|0) try='int getnetent_r(struct netent*, char*, size_t, struct netent**, int*);'
+ ./protochk "extern $try" $hdrs && getnetent_r_proto=I_SBWRE ;;
+ esac
+ case "$getnetent_r_proto" in
+ ''|0) try='int getnetent_r(struct netent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && getnetent_r_proto=I_SBIE ;;
+ esac
+ case "$getnetent_r_proto" in
+ ''|0) try='struct netent* getnetent_r(struct netent*, char*, int, int*);'
+ ./protochk "extern $try" $hdrs && getnetent_r_proto=S_SBIE ;;
+ esac
+ case "$getnetent_r_proto" in
+ ''|0) try='struct netent* getnetent_r(struct netent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getnetent_r_proto=S_SBI ;;
+ esac
+ case "$getnetent_r_proto" in
+ ''|0) try='int getnetent_r(struct netent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getnetent_r_proto=I_SBI ;;
+ esac
+ case "$getnetent_r_proto" in
+ ''|0) try='int getnetent_r(struct netent*, struct netent_data*);'
+ ./protochk "extern $try" $hdrs && getnetent_r_proto=I_SD ;;
+ esac
+ case "$getnetent_r_proto" in
+ ''|0) d_getnetent_r=undef
+ getnetent_r_proto=0
+ echo "Disabling getnetent_r, cannot determine prototype." >&4 ;;
+ * ) case "$getnetent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getnetent_r_proto="REENTRANT_PROTO_$getnetent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getnetent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getnetent_r=undef
+ getnetent_r_proto=0
+ ;;
+ esac
+ ;;
+*) getnetent_r_proto=0
+ ;;
+esac
+
: see if prototypes for various getnetxxx netdb.h functions are available
echo " "
set d_getnetprotos getnetent $i_netdb netdb.h
set getpriority d_getprior
eval $inlibc
+: see if getprotobyname_r exists
+set getprotobyname_r d_getprotobyname_r
+eval $inlibc
+case "$d_getprotobyname_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_getprotobyname_r_proto:$usethreads" in
+ ":define") d_getprotobyname_r_proto=define
+ set d_getprotobyname_r_proto getprotobyname_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getprotobyname_r_proto" in
+ define)
+ case "$getprotobyname_r_proto" in
+ ''|0) try='int getprotobyname_r(const char*, struct protoent*, char*, size_t, struct protoent**);'
+ ./protochk "extern $try" $hdrs && getprotobyname_r_proto=I_CSBWR ;;
+ esac
+ case "$getprotobyname_r_proto" in
+ ''|0) try='struct protoent* getprotobyname_r(const char*, struct protoent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getprotobyname_r_proto=S_CSBI ;;
+ esac
+ case "$getprotobyname_r_proto" in
+ ''|0) try='int getprotobyname_r(const char*, struct protoent*, struct protoent_data*);'
+ ./protochk "extern $try" $hdrs && getprotobyname_r_proto=I_CSD ;;
+ esac
+ case "$getprotobyname_r_proto" in
+ ''|0) d_getprotobyname_r=undef
+ getprotobyname_r_proto=0
+ echo "Disabling getprotobyname_r, cannot determine prototype." >&4 ;;
+ * ) case "$getprotobyname_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getprotobyname_r_proto="REENTRANT_PROTO_$getprotobyname_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getprotobyname_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getprotobyname_r=undef
+ getprotobyname_r_proto=0
+ ;;
+ esac
+ ;;
+*) getprotobyname_r_proto=0
+ ;;
+esac
+
+: see if getprotobynumber_r exists
+set getprotobynumber_r d_getprotobynumber_r
+eval $inlibc
+case "$d_getprotobynumber_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_getprotobynumber_r_proto:$usethreads" in
+ ":define") d_getprotobynumber_r_proto=define
+ set d_getprotobynumber_r_proto getprotobynumber_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getprotobynumber_r_proto" in
+ define)
+ case "$getprotobynumber_r_proto" in
+ ''|0) try='int getprotobynumber_r(int, struct protoent*, char*, size_t, struct protoent**);'
+ ./protochk "extern $try" $hdrs && getprotobynumber_r_proto=I_ISBWR ;;
+ esac
+ case "$getprotobynumber_r_proto" in
+ ''|0) try='struct protoent* getprotobynumber_r(int, struct protoent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getprotobynumber_r_proto=S_ISBI ;;
+ esac
+ case "$getprotobynumber_r_proto" in
+ ''|0) try='int getprotobynumber_r(int, struct protoent*, struct protoent_data*);'
+ ./protochk "extern $try" $hdrs && getprotobynumber_r_proto=I_ISD ;;
+ esac
+ case "$getprotobynumber_r_proto" in
+ ''|0) d_getprotobynumber_r=undef
+ getprotobynumber_r_proto=0
+ echo "Disabling getprotobynumber_r, cannot determine prototype." >&4 ;;
+ * ) case "$getprotobynumber_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getprotobynumber_r_proto="REENTRANT_PROTO_$getprotobynumber_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getprotobynumber_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getprotobynumber_r=undef
+ getprotobynumber_r_proto=0
+ ;;
+ esac
+ ;;
+*) getprotobynumber_r_proto=0
+ ;;
+esac
+
+: see if getprotoent_r exists
+set getprotoent_r d_getprotoent_r
+eval $inlibc
+case "$d_getprotoent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_getprotoent_r_proto:$usethreads" in
+ ":define") d_getprotoent_r_proto=define
+ set d_getprotoent_r_proto getprotoent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getprotoent_r_proto" in
+ define)
+ case "$getprotoent_r_proto" in
+ ''|0) try='int getprotoent_r(struct protoent*, char*, size_t, struct protoent**);'
+ ./protochk "extern $try" $hdrs && getprotoent_r_proto=I_SBWR ;;
+ esac
+ case "$getprotoent_r_proto" in
+ ''|0) try='int getprotoent_r(struct protoent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getprotoent_r_proto=I_SBI ;;
+ esac
+ case "$getprotoent_r_proto" in
+ ''|0) try='struct protoent* getprotoent_r(struct protoent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getprotoent_r_proto=S_SBI ;;
+ esac
+ case "$getprotoent_r_proto" in
+ ''|0) try='int getprotoent_r(struct protoent*, struct protoent_data*);'
+ ./protochk "extern $try" $hdrs && getprotoent_r_proto=I_SD ;;
+ esac
+ case "$getprotoent_r_proto" in
+ ''|0) d_getprotoent_r=undef
+ getprotoent_r_proto=0
+ echo "Disabling getprotoent_r, cannot determine prototype." >&4 ;;
+ * ) case "$getprotoent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getprotoent_r_proto="REENTRANT_PROTO_$getprotoent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getprotoent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getprotoent_r=undef
+ getprotoent_r_proto=0
+ ;;
+ esac
+ ;;
+*) getprotoent_r_proto=0
+ ;;
+esac
+
: see if prototypes for various getprotoxxx netdb.h functions are available
echo " "
set d_getprotoprotos getprotoent $i_netdb netdb.h
eval $hasproto
-: see if getprpwnam exists
-set getprpwnam d_getprpwnam
+: see if getprpwnam exists
+set getprpwnam d_getprpwnam
+eval $inlibc
+
+: see if getpwent exists
+set getpwent d_getpwent
+eval $inlibc
+
+: see if getpwent_r exists
+set getpwent_r d_getpwent_r
+eval $inlibc
+case "$d_getpwent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_pwd pwd.h"
+ case "$d_getpwent_r_proto:$usethreads" in
+ ":define") d_getpwent_r_proto=define
+ set d_getpwent_r_proto getpwent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getpwent_r_proto" in
+ define)
+ case "$getpwent_r_proto" in
+ ''|0) try='int getpwent_r(struct passwd*, char*, size_t, struct passwd**);'
+ ./protochk "extern $try" $hdrs && getpwent_r_proto=I_SBWR ;;
+ esac
+ case "$getpwent_r_proto" in
+ ''|0) try='int getpwent_r(struct passwd*, char*, int, struct passwd**);'
+ ./protochk "extern $try" $hdrs && getpwent_r_proto=I_SBIR ;;
+ esac
+ case "$getpwent_r_proto" in
+ ''|0) try='struct passwd* getpwent_r(struct passwd*, char*, size_t);'
+ ./protochk "extern $try" $hdrs && getpwent_r_proto=S_SBW ;;
+ esac
+ case "$getpwent_r_proto" in
+ ''|0) try='struct passwd* getpwent_r(struct passwd*, char*, int);'
+ ./protochk "extern $try" $hdrs && getpwent_r_proto=S_SBI ;;
+ esac
+ case "$getpwent_r_proto" in
+ ''|0) try='int getpwent_r(struct passwd*, char*, int);'
+ ./protochk "extern $try" $hdrs && getpwent_r_proto=I_SBI ;;
+ esac
+ case "$getpwent_r_proto" in
+ ''|0) try='int getpwent_r(struct passwd*, char*, int, FILE**);'
+ ./protochk "extern $try" $hdrs && getpwent_r_proto=I_SBIH ;;
+ esac
+ case "$getpwent_r_proto" in
+ ''|0) d_getpwent_r=undef
+ getpwent_r_proto=0
+ echo "Disabling getpwent_r, cannot determine prototype." >&4 ;;
+ * ) case "$getpwent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getpwent_r_proto="REENTRANT_PROTO_$getpwent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getpwent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getpwent_r=undef
+ getpwent_r_proto=0
+ ;;
+ esac
+ ;;
+*) getpwent_r_proto=0
+ ;;
+esac
+
+: see if getpwnam_r exists
+set getpwnam_r d_getpwnam_r
eval $inlibc
+case "$d_getpwnam_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_pwd pwd.h"
+ case "$d_getpwnam_r_proto:$usethreads" in
+ ":define") d_getpwnam_r_proto=define
+ set d_getpwnam_r_proto getpwnam_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getpwnam_r_proto" in
+ define)
+ case "$getpwnam_r_proto" in
+ ''|0) try='int getpwnam_r(const char*, struct passwd*, char*, size_t, struct passwd**);'
+ ./protochk "extern $try" $hdrs && getpwnam_r_proto=I_CSBWR ;;
+ esac
+ case "$getpwnam_r_proto" in
+ ''|0) try='int getpwnam_r(const char*, struct passwd*, char*, int, struct passwd**);'
+ ./protochk "extern $try" $hdrs && getpwnam_r_proto=I_CSBIR ;;
+ esac
+ case "$getpwnam_r_proto" in
+ ''|0) try='struct passwd* getpwnam_r(const char*, struct passwd*, char*, int);'
+ ./protochk "extern $try" $hdrs && getpwnam_r_proto=S_CSBI ;;
+ esac
+ case "$getpwnam_r_proto" in
+ ''|0) try='int getpwnam_r(const char*, struct passwd*, char*, int);'
+ ./protochk "extern $try" $hdrs && getpwnam_r_proto=I_CSBI ;;
+ esac
+ case "$getpwnam_r_proto" in
+ ''|0) d_getpwnam_r=undef
+ getpwnam_r_proto=0
+ echo "Disabling getpwnam_r, cannot determine prototype." >&4 ;;
+ * ) case "$getpwnam_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getpwnam_r_proto="REENTRANT_PROTO_$getpwnam_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getpwnam_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getpwnam_r=undef
+ getpwnam_r_proto=0
+ ;;
+ esac
+ ;;
+*) getpwnam_r_proto=0
+ ;;
+esac
-: see if getpwent exists
-set getpwent d_getpwent
+: see if getpwuid_r exists
+set getpwuid_r d_getpwuid_r
eval $inlibc
+case "$d_getpwuid_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_pwd pwd.h"
+ case "$d_getpwuid_r_proto:$usethreads" in
+ ":define") d_getpwuid_r_proto=define
+ set d_getpwuid_r_proto getpwuid_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getpwuid_r_proto" in
+ define)
+ case "$getpwuid_r_proto" in
+ ''|0) try='int getpwuid_r(uid_t, struct passwd*, char*, size_t, struct passwd**);'
+ ./protochk "extern $try" $hdrs && getpwuid_r_proto=I_TSBWR ;;
+ esac
+ case "$getpwuid_r_proto" in
+ ''|0) try='int getpwuid_r(uid_t, struct passwd*, char*, int, struct passwd**);'
+ ./protochk "extern $try" $hdrs && getpwuid_r_proto=I_TSBIR ;;
+ esac
+ case "$getpwuid_r_proto" in
+ ''|0) try='int getpwuid_r(uid_t, struct passwd*, char*, int);'
+ ./protochk "extern $try" $hdrs && getpwuid_r_proto=I_TSBI ;;
+ esac
+ case "$getpwuid_r_proto" in
+ ''|0) try='struct passwd* getpwuid_r(uid_t, struct passwd*, char*, int);'
+ ./protochk "extern $try" $hdrs && getpwuid_r_proto=S_TSBI ;;
+ esac
+ case "$getpwuid_r_proto" in
+ ''|0) d_getpwuid_r=undef
+ getpwuid_r_proto=0
+ echo "Disabling getpwuid_r, cannot determine prototype." >&4 ;;
+ * ) case "$getpwuid_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getpwuid_r_proto="REENTRANT_PROTO_$getpwuid_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getpwuid_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getpwuid_r=undef
+ getpwuid_r_proto=0
+ ;;
+ esac
+ ;;
+*) getpwuid_r_proto=0
+ ;;
+esac
: see if getservbyname exists
set getservent d_getsent
eval $inlibc
+: see if getservbyname_r exists
+set getservbyname_r d_getservbyname_r
+eval $inlibc
+case "$d_getservbyname_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_getservbyname_r_proto:$usethreads" in
+ ":define") d_getservbyname_r_proto=define
+ set d_getservbyname_r_proto getservbyname_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getservbyname_r_proto" in
+ define)
+ case "$getservbyname_r_proto" in
+ ''|0) try='int getservbyname_r(const char*, const char*, struct servent*, char*, size_t, struct servent**);'
+ ./protochk "extern $try" $hdrs && getservbyname_r_proto=I_CCSBWR ;;
+ esac
+ case "$getservbyname_r_proto" in
+ ''|0) try='struct servent* getservbyname_r(const char*, const char*, struct servent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getservbyname_r_proto=S_CCSBI ;;
+ esac
+ case "$getservbyname_r_proto" in
+ ''|0) try='int getservbyname_r(const char*, const char*, struct servent*, struct servent_data*);'
+ ./protochk "extern $try" $hdrs && getservbyname_r_proto=I_CCSD ;;
+ esac
+ case "$getservbyname_r_proto" in
+ ''|0) d_getservbyname_r=undef
+ getservbyname_r_proto=0
+ echo "Disabling getservbyname_r, cannot determine prototype." >&4 ;;
+ * ) case "$getservbyname_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getservbyname_r_proto="REENTRANT_PROTO_$getservbyname_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getservbyname_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getservbyname_r=undef
+ getservbyname_r_proto=0
+ ;;
+ esac
+ ;;
+*) getservbyname_r_proto=0
+ ;;
+esac
+
+: see if getservbyport_r exists
+set getservbyport_r d_getservbyport_r
+eval $inlibc
+case "$d_getservbyport_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_getservbyport_r_proto:$usethreads" in
+ ":define") d_getservbyport_r_proto=define
+ set d_getservbyport_r_proto getservbyport_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getservbyport_r_proto" in
+ define)
+ case "$getservbyport_r_proto" in
+ ''|0) try='int getservbyport_r(int, const char*, struct servent*, char*, size_t, struct servent**);'
+ ./protochk "extern $try" $hdrs && getservbyport_r_proto=I_ICSBWR ;;
+ esac
+ case "$getservbyport_r_proto" in
+ ''|0) try='struct servent* getservbyport_r(int, const char*, struct servent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getservbyport_r_proto=S_ICSBI ;;
+ esac
+ case "$getservbyport_r_proto" in
+ ''|0) try='int getservbyport_r(int, const char*, struct servent*, struct servent_data*);'
+ ./protochk "extern $try" $hdrs && getservbyport_r_proto=I_ICSD ;;
+ esac
+ case "$getservbyport_r_proto" in
+ ''|0) d_getservbyport_r=undef
+ getservbyport_r_proto=0
+ echo "Disabling getservbyport_r, cannot determine prototype." >&4 ;;
+ * ) case "$getservbyport_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getservbyport_r_proto="REENTRANT_PROTO_$getservbyport_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getservbyport_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getservbyport_r=undef
+ getservbyport_r_proto=0
+ ;;
+ esac
+ ;;
+*) getservbyport_r_proto=0
+ ;;
+esac
+
+: see if getservent_r exists
+set getservent_r d_getservent_r
+eval $inlibc
+case "$d_getservent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_getservent_r_proto:$usethreads" in
+ ":define") d_getservent_r_proto=define
+ set d_getservent_r_proto getservent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getservent_r_proto" in
+ define)
+ case "$getservent_r_proto" in
+ ''|0) try='int getservent_r(struct servent*, char*, size_t, struct servent**);'
+ ./protochk "extern $try" $hdrs && getservent_r_proto=I_SBWR ;;
+ esac
+ case "$getservent_r_proto" in
+ ''|0) try='int getservent_r(struct servent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getservent_r_proto=I_SBI ;;
+ esac
+ case "$getservent_r_proto" in
+ ''|0) try='struct servent* getservent_r(struct servent*, char*, int);'
+ ./protochk "extern $try" $hdrs && getservent_r_proto=S_SBI ;;
+ esac
+ case "$getservent_r_proto" in
+ ''|0) try='int getservent_r(struct servent*, struct servent_data*);'
+ ./protochk "extern $try" $hdrs && getservent_r_proto=I_SD ;;
+ esac
+ case "$getservent_r_proto" in
+ ''|0) d_getservent_r=undef
+ getservent_r_proto=0
+ echo "Disabling getservent_r, cannot determine prototype." >&4 ;;
+ * ) case "$getservent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getservent_r_proto="REENTRANT_PROTO_$getservent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getservent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getservent_r=undef
+ getservent_r_proto=0
+ ;;
+ esac
+ ;;
+*) getservent_r_proto=0
+ ;;
+esac
+
: see if prototypes for various getservxxx netdb.h functions are available
echo " "
set d_getservprotos getservent $i_netdb netdb.h
set getspnam d_getspnam
eval $inlibc
+: see if this is a shadow.h system
+set shadow.h i_shadow
+eval $inhdr
+
+: see if getspnam_r exists
+set getspnam_r d_getspnam_r
+eval $inlibc
+case "$d_getspnam_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_shadow shadow.h"
+ case "$d_getspnam_r_proto:$usethreads" in
+ ":define") d_getspnam_r_proto=define
+ set d_getspnam_r_proto getspnam_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_getspnam_r_proto" in
+ define)
+ case "$getspnam_r_proto" in
+ ''|0) try='int getspnam_r(const char*, struct spwd*, char*, size_t, struct spwd**);'
+ ./protochk "extern $try" $hdrs && getspnam_r_proto=I_CSBWR ;;
+ esac
+ case "$getspnam_r_proto" in
+ ''|0) try='struct spwd* getspnam_r(const char*, struct spwd*, char*, int);'
+ ./protochk "extern $try" $hdrs && getspnam_r_proto=S_CSBI ;;
+ esac
+ case "$getspnam_r_proto" in
+ ''|0) d_getspnam_r=undef
+ getspnam_r_proto=0
+ echo "Disabling getspnam_r, cannot determine prototype." >&4 ;;
+ * ) case "$getspnam_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) getspnam_r_proto="REENTRANT_PROTO_$getspnam_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "getspnam_r has no prototype, not using it." >&4 ;;
+ esac
+ d_getspnam_r=undef
+ getspnam_r_proto=0
+ ;;
+ esac
+ ;;
+*) getspnam_r_proto=0
+ ;;
+esac
+
: see if gettimeofday or ftime exists
set gettimeofday d_gettimeod
eval $inlibc
;;
esac
-: see if this is an grp system
-set grp.h i_grp
-eval $inhdr
-
-case "$i_grp" in
-$define)
- xxx=`./findhdr grp.h`
- $cppstdin $cppflags $cppminus < $xxx >$$.h
-
- if $contains 'gr_passwd' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_grpasswd
- eval $setvar
-
- $rm -f $$.h
+: see if gmtime_r exists
+set gmtime_r d_gmtime_r
+eval $inlibc
+case "$d_gmtime_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_time time.h $i_systime sys/time.h"
+ case "$d_gmtime_r_proto:$usethreads" in
+ ":define") d_gmtime_r_proto=define
+ set d_gmtime_r_proto gmtime_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_gmtime_r_proto" in
+ define)
+ case "$gmtime_r_proto" in
+ ''|0) try='struct tm* gmtime_r(const time_t*, struct tm*);'
+ ./protochk "extern $try" $hdrs && gmtime_r_proto=S_TS ;;
+ esac
+ case "$gmtime_r_proto" in
+ ''|0) try='int gmtime_r(const time_t*, struct tm*);'
+ ./protochk "extern $try" $hdrs && gmtime_r_proto=I_TS ;;
+ esac
+ case "$gmtime_r_proto" in
+ ''|0) d_gmtime_r=undef
+ gmtime_r_proto=0
+ echo "Disabling gmtime_r, cannot determine prototype." >&4 ;;
+ * ) case "$gmtime_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) gmtime_r_proto="REENTRANT_PROTO_$gmtime_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
;;
-*)
- val="$undef";
- set d_grpasswd; eval $setvar
+ *) case "$usethreads" in
+ define) echo "gmtime_r has no prototype, not using it." >&4 ;;
+ esac
+ d_gmtime_r=undef
+ gmtime_r_proto=0
+ ;;
+ esac
+ ;;
+*) gmtime_r_proto=0
;;
esac
set link d_link
eval $inlibc
+: see if localtime_r exists
+set localtime_r d_localtime_r
+eval $inlibc
+case "$d_localtime_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_time time.h $i_systime sys/time.h"
+ case "$d_localtime_r_proto:$usethreads" in
+ ":define") d_localtime_r_proto=define
+ set d_localtime_r_proto localtime_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_localtime_r_proto" in
+ define)
+ case "$localtime_r_proto" in
+ ''|0) try='struct tm* localtime_r(const time_t*, struct tm*);'
+ ./protochk "extern $try" $hdrs && localtime_r_proto=S_TS ;;
+ esac
+ case "$localtime_r_proto" in
+ ''|0) try='int localtime_r(const time_t*, struct tm*);'
+ ./protochk "extern $try" $hdrs && localtime_r_proto=I_TS ;;
+ esac
+ case "$localtime_r_proto" in
+ ''|0) d_localtime_r=undef
+ localtime_r_proto=0
+ echo "Disabling localtime_r, cannot determine prototype." >&4 ;;
+ * ) case "$localtime_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) localtime_r_proto="REENTRANT_PROTO_$localtime_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "localtime_r has no prototype, not using it." >&4 ;;
+ esac
+ d_localtime_r=undef
+ localtime_r_proto=0
+ ;;
+ esac
+ ;;
+*) localtime_r_proto=0
+ ;;
+esac
+
: see if localeconv exists
set localeconv d_locconv
eval $inlibc
: see if memmove exists
set memmove d_memmove
eval $inlibc
-
-: see if memset exists
-set memset d_memset
-eval $inlibc
-
-: see if mkdir exists
-set mkdir d_mkdir
-eval $inlibc
-
-: see if mkdtemp exists
-set mkdtemp d_mkdtemp
-eval $inlibc
-
-: see if mkfifo exists
-set mkfifo d_mkfifo
-eval $inlibc
-
-: see if mkstemp exists
-set mkstemp d_mkstemp
-eval $inlibc
-
-: see if mkstemps exists
-set mkstemps d_mkstemps
-eval $inlibc
-
-: see if mktime exists
-set mktime d_mktime
-eval $inlibc
-
-: see if this is a sys/mman.h system
-set sys/mman.h i_sysmman
-eval $inhdr
-
-: see if mmap exists
-set mmap d_mmap
-eval $inlibc
-: see what shmat returns
-: default to something harmless
-mmaptype='void *'
-case "$i_sysmman$d_mmap" in
-"$define$define")
- $cat >mmap.c <<'END'
-#include <sys/mman.h>
-void *mmap();
-END
- if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
- mmaptype='void *'
- else
- mmaptype='caddr_t'
- fi
- echo "and it returns ($mmaptype)." >&4
- ;;
-esac
-
-
-
-: see if modfl exists
-set modfl d_modfl
-eval $inlibc
-
-d_modfl_pow32_bug="$undef"
-
-case "$d_longdbl$d_modfl" in
-$define$define)
- $cat <<EOM
-Checking to see whether your modfl() is okay for large values...
-EOM
-$cat >try.c <<EOCP
-#include <math.h>
-#include <stdio.h>
-int main() {
- long double nv = 4294967303.15;
- long double v, w;
- v = modfl(nv, &w);
-#ifdef __GLIBC__
- printf("glibc");
-#endif
- printf(" %"$sPRIfldbl" %"$sPRIfldbl" %"$sPRIfldbl"\n", nv, v, w);
- return 0;
-}
-EOCP
- case "$osname:$gccversion" in
- aix:) saveccflags="$ccflags"
- ccflags="$ccflags -qlongdouble" ;; # to avoid core dump
- esac
- set try
- if eval $compile; then
- foo=`$run ./try`
- case "$foo" in
- *" 4294967303.150000 1.150000 4294967302.000000")
- echo >&4 "Your modfl() is broken for large values."
- d_modfl_pow32_bug="$define"
- case "$foo" in
- glibc) echo >&4 "You should upgrade your glibc to at least 2.2.2 to get a fixed modfl()."
- ;;
- esac
- ;;
- *" 4294967303.150000 0.150000 4294967303.000000")
- echo >&4 "Your modfl() seems okay for large values."
- ;;
- *) echo >&4 "I don't understand your modfl() at all."
- d_modfl="$undef"
- ;;
- esac
- $rm -f try.* try core core.try.*
+
+: see if memset exists
+set memset d_memset
+eval $inlibc
+
+: see if mkdir exists
+set mkdir d_mkdir
+eval $inlibc
+
+: see if mkdtemp exists
+set mkdtemp d_mkdtemp
+eval $inlibc
+
+: see if mkfifo exists
+set mkfifo d_mkfifo
+eval $inlibc
+
+: see if mkstemp exists
+set mkstemp d_mkstemp
+eval $inlibc
+
+: see if mkstemps exists
+set mkstemps d_mkstemps
+eval $inlibc
+
+: see if mktime exists
+set mktime d_mktime
+eval $inlibc
+
+: see if this is a sys/mman.h system
+set sys/mman.h i_sysmman
+eval $inhdr
+
+: see if mmap exists
+set mmap d_mmap
+eval $inlibc
+: see what shmat returns
+: default to something harmless
+mmaptype='void *'
+case "$i_sysmman$d_mmap" in
+"$define$define")
+ $cat >mmap.c <<'END'
+#include <sys/mman.h>
+void *mmap();
+END
+ if $cc $ccflags -c mmap.c >/dev/null 2>&1; then
+ mmaptype='void *'
else
- echo "I cannot figure out whether your modfl() is okay, assuming it isn't."
- d_modfl="$undef"
+ mmaptype='caddr_t'
fi
- case "$osname:$gccversion" in
- aix:) ccflags="$saveccflags" ;; # restore
- esac
+ echo "and it returns ($mmaptype)." >&4
;;
esac
+
+
: see if mprotect exists
set mprotect d_mprotect
eval $inlibc
d_nv_preserves_uv="$undef"
if eval $compile; then
- d_nv_preserves_uv_bits="`$run ./try`"
+ nv_preserves_uv_bits="`$run ./try`"
fi
-case "$d_nv_preserves_uv_bits" in
+case "$nv_preserves_uv_bits" in
\-[1-9]*)
- d_nv_preserves_uv_bits=`expr 0 - $d_nv_preserves_uv_bits`
- $echo "Your NVs can preserve all $d_nv_preserves_uv_bits bits of your UVs." 2>&1
+ nv_preserves_uv_bits=`expr 0 - $nv_preserves_uv_bits`
+ $echo "Your NVs can preserve all $nv_preserves_uv_bits bits of your UVs." 2>&1
d_nv_preserves_uv="$define"
;;
-[1-9]*) $echo "Your NVs can preserve only $d_nv_preserves_uv_bits bits of your UVs." 2>&1
+[1-9]*) $echo "Your NVs can preserve only $nv_preserves_uv_bits bits of your UVs." 2>&1
d_nv_preserves_uv="$undef" ;;
*) $echo "Can't figure out how many bits your NVs preserve." 2>&1
- d_nv_preserves_uv_bits="$undef" ;;
+ nv_preserves_uv_bits="$undef" ;;
esac
$rm -f try.* try
set d_off64_t
eval $setvar
-: see if POSIX threads are available
-set pthread.h i_pthread
-eval $inhdr
-
-
-
-
: how to create joinable pthreads
if test "X$usethreads" = "X$define" -a "X$i_pthread" = "X$define"; then
echo " "
set d_procselfexe
eval $setvar
+: see whether the pthread_atfork exists
+$cat >try.c <<EOP
+#include <pthread.h>
+#include <stdio.h>
+int main() {
+#ifdef PTHREAD_ATFORK
+ pthread_atfork(NULL,NULL,NULL);
+#endif
+}
+EOP
+
: see if pthread_atfork exists
-set pthread_atfork d_pthread_atfork
-eval $inlibc
+set try -DPTHREAD_ATFORK
+if eval $compile; then
+ val="$define"
+else
+ val="$undef"
+fi
+case "$usethreads" in
+$define)
+ case "$val" in
+ $define) echo 'pthread_atfork found.' >&4 ;;
+ *) echo 'pthread_atfork NOT found.' >&4 ;;
+ esac
+esac
+set d_pthread_atfork
+eval $setvar
: see whether the various POSIXish _yields exist
$rm -f try try.*
-: see if this is a pwd.h system
-set pwd.h i_pwd
-eval $inhdr
-
-case "$i_pwd" in
-$define)
- xxx=`./findhdr pwd.h`
- $cppstdin $cppflags $cppminus < $xxx >$$.h
-
- if $contains 'pw_quota' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwquota
- eval $setvar
-
- if $contains 'pw_age' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwage
- eval $setvar
-
- if $contains 'pw_change' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwchange
- eval $setvar
-
- if $contains 'pw_class' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwclass
- eval $setvar
-
- if $contains 'pw_expire' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwexpire
- eval $setvar
-
- if $contains 'pw_comment' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwcomment
- eval $setvar
-
- if $contains 'pw_gecos' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwgecos
- eval $setvar
-
- if $contains 'pw_passwd' $$.h >/dev/null 2>&1; then
- val="$define"
- else
- val="$undef"
- fi
- set d_pwpasswd
- eval $setvar
-
- $rm -f $$.h
+: see if random_r exists
+set random_r d_random_r
+eval $inlibc
+case "$d_random_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_stdlib stdlib.h"
+ case "$d_random_r_proto:$usethreads" in
+ ":define") d_random_r_proto=define
+ set d_random_r_proto random_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_random_r_proto" in
+ define)
+ case "$random_r_proto" in
+ ''|0) try='int random_r(int*, struct random_data*);'
+ ./protochk "extern $try" $hdrs && random_r_proto=I_TS ;;
+ esac
+ case "$random_r_proto" in
+ ''|0) d_random_r=undef
+ random_r_proto=0
+ echo "Disabling random_r, cannot determine prototype." >&4 ;;
+ * ) case "$random_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) random_r_proto="REENTRANT_PROTO_$random_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
;;
-*)
- val="$undef";
- set d_pwquota; eval $setvar
- set d_pwage; eval $setvar
- set d_pwchange; eval $setvar
- set d_pwclass; eval $setvar
- set d_pwexpire; eval $setvar
- set d_pwcomment; eval $setvar
- set d_pwgecos; eval $setvar
- set d_pwpasswd; eval $setvar
+ *) case "$usethreads" in
+ define) echo "random_r has no prototype, not using it." >&4 ;;
+ esac
+ d_random_r=undef
+ random_r_proto=0
+ ;;
+ esac
+ ;;
+*) random_r_proto=0
;;
esac
set rewinddir d_rewinddir
eval $inlibc
+: see if readdir64_r exists
+set readdir64_r d_readdir64_r
+eval $inlibc
+case "$d_readdir64_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_dirent dirent.h"
+ case "$d_readdir64_r_proto:$usethreads" in
+ ":define") d_readdir64_r_proto=define
+ set d_readdir64_r_proto readdir64_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_readdir64_r_proto" in
+ define)
+ case "$readdir64_r_proto" in
+ ''|0) try='int readdir64_r(DIR*, struct dirent64*, struct dirent64**);'
+ ./protochk "extern $try" $hdrs && readdir64_r_proto=I_TSR ;;
+ esac
+ case "$readdir64_r_proto" in
+ ''|0) try='int readdir64_r(DIR*, struct dirent64*);'
+ ./protochk "extern $try" $hdrs && readdir64_r_proto=I_TS ;;
+ esac
+ case "$readdir64_r_proto" in
+ ''|0) d_readdir64_r=undef
+ readdir64_r_proto=0
+ echo "Disabling readdir64_r, cannot determine prototype." >&4 ;;
+ * ) case "$readdir64_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) readdir64_r_proto="REENTRANT_PROTO_$readdir64_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "readdir64_r has no prototype, not using it." >&4 ;;
+ esac
+ d_readdir64_r=undef
+ readdir64_r_proto=0
+ ;;
+ esac
+ ;;
+*) readdir64_r_proto=0
+ ;;
+esac
+
+: see if readdir_r exists
+set readdir_r d_readdir_r
+eval $inlibc
+case "$d_readdir_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_dirent dirent.h"
+ case "$d_readdir_r_proto:$usethreads" in
+ ":define") d_readdir_r_proto=define
+ set d_readdir_r_proto readdir_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_readdir_r_proto" in
+ define)
+ case "$readdir_r_proto" in
+ ''|0) try='int readdir_r(DIR*, struct dirent*, struct dirent**);'
+ ./protochk "extern $try" $hdrs && readdir_r_proto=I_TSR ;;
+ esac
+ case "$readdir_r_proto" in
+ ''|0) try='int readdir_r(DIR*, struct dirent*);'
+ ./protochk "extern $try" $hdrs && readdir_r_proto=I_TS ;;
+ esac
+ case "$readdir_r_proto" in
+ ''|0) d_readdir_r=undef
+ readdir_r_proto=0
+ echo "Disabling readdir_r, cannot determine prototype." >&4 ;;
+ * ) case "$readdir_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) readdir_r_proto="REENTRANT_PROTO_$readdir_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "readdir_r has no prototype, not using it." >&4 ;;
+ esac
+ d_readdir_r=undef
+ readdir_r_proto=0
+ ;;
+ esac
+ ;;
+*) readdir_r_proto=0
+ ;;
+esac
+
: see if readv exists
set readv d_readv
eval $inlibc
set setgrent d_setgrent
eval $inlibc
+: see if setgrent_r exists
+set setgrent_r d_setgrent_r
+eval $inlibc
+case "$d_setgrent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_grp grp.h"
+ case "$d_setgrent_r_proto:$usethreads" in
+ ":define") d_setgrent_r_proto=define
+ set d_setgrent_r_proto setgrent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_setgrent_r_proto" in
+ define)
+ case "$setgrent_r_proto" in
+ ''|0) try='int setgrent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && setgrent_r_proto=I_H ;;
+ esac
+ case "$setgrent_r_proto" in
+ ''|0) try='void setgrent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && setgrent_r_proto=V_H ;;
+ esac
+ case "$setgrent_r_proto" in
+ ''|0) d_setgrent_r=undef
+ setgrent_r_proto=0
+ echo "Disabling setgrent_r, cannot determine prototype." >&4 ;;
+ * ) case "$setgrent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) setgrent_r_proto="REENTRANT_PROTO_$setgrent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "setgrent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_setgrent_r=undef
+ setgrent_r_proto=0
+ ;;
+ esac
+ ;;
+*) setgrent_r_proto=0
+ ;;
+esac
+
: see if sethostent exists
set sethostent d_sethent
eval $inlibc
+: see if sethostent_r exists
+set sethostent_r d_sethostent_r
+eval $inlibc
+case "$d_sethostent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_sethostent_r_proto:$usethreads" in
+ ":define") d_sethostent_r_proto=define
+ set d_sethostent_r_proto sethostent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_sethostent_r_proto" in
+ define)
+ case "$sethostent_r_proto" in
+ ''|0) try='int sethostent_r(int, struct hostent_data*);'
+ ./protochk "extern $try" $hdrs && sethostent_r_proto=I_ID ;;
+ esac
+ case "$sethostent_r_proto" in
+ ''|0) try='void sethostent_r(int, struct hostent_data*);'
+ ./protochk "extern $try" $hdrs && sethostent_r_proto=V_ID ;;
+ esac
+ case "$sethostent_r_proto" in
+ ''|0) d_sethostent_r=undef
+ sethostent_r_proto=0
+ echo "Disabling sethostent_r, cannot determine prototype." >&4 ;;
+ * ) case "$sethostent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) sethostent_r_proto="REENTRANT_PROTO_$sethostent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "sethostent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_sethostent_r=undef
+ sethostent_r_proto=0
+ ;;
+ esac
+ ;;
+*) sethostent_r_proto=0
+ ;;
+esac
+
: see if setitimer exists
set setitimer d_setitimer
eval $inlibc
set setlocale d_setlocale
eval $inlibc
+: see if locale.h is available
+set locale.h i_locale
+eval $inhdr
+
+: see if setlocale_r exists
+set setlocale_r d_setlocale_r
+eval $inlibc
+case "$d_setlocale_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_locale locale.h"
+ case "$d_setlocale_r_proto:$usethreads" in
+ ":define") d_setlocale_r_proto=define
+ set d_setlocale_r_proto setlocale_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_setlocale_r_proto" in
+ define)
+ case "$setlocale_r_proto" in
+ ''|0) try='int setlocale_r(int, const char*, char*, int);'
+ ./protochk "extern $try" $hdrs && setlocale_r_proto=I_ICBI ;;
+ esac
+ case "$setlocale_r_proto" in
+ ''|0) d_setlocale_r=undef
+ setlocale_r_proto=0
+ echo "Disabling setlocale_r, cannot determine prototype." >&4 ;;
+ * ) case "$setlocale_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) setlocale_r_proto="REENTRANT_PROTO_$setlocale_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "setlocale_r has no prototype, not using it." >&4 ;;
+ esac
+ d_setlocale_r=undef
+ setlocale_r_proto=0
+ ;;
+ esac
+ ;;
+*) setlocale_r_proto=0
+ ;;
+esac
+
: see if setnetent exists
set setnetent d_setnent
eval $inlibc
+: see if setnetent_r exists
+set setnetent_r d_setnetent_r
+eval $inlibc
+case "$d_setnetent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_setnetent_r_proto:$usethreads" in
+ ":define") d_setnetent_r_proto=define
+ set d_setnetent_r_proto setnetent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_setnetent_r_proto" in
+ define)
+ case "$setnetent_r_proto" in
+ ''|0) try='int setnetent_r(int, struct netent_data*);'
+ ./protochk "extern $try" $hdrs && setnetent_r_proto=I_ID ;;
+ esac
+ case "$setnetent_r_proto" in
+ ''|0) try='void setnetent_r(int, struct netent_data*);'
+ ./protochk "extern $try" $hdrs && setnetent_r_proto=V_ID ;;
+ esac
+ case "$setnetent_r_proto" in
+ ''|0) d_setnetent_r=undef
+ setnetent_r_proto=0
+ echo "Disabling setnetent_r, cannot determine prototype." >&4 ;;
+ * ) case "$setnetent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) setnetent_r_proto="REENTRANT_PROTO_$setnetent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "setnetent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_setnetent_r=undef
+ setnetent_r_proto=0
+ ;;
+ esac
+ ;;
+*) setnetent_r_proto=0
+ ;;
+esac
+
: see if setprotoent exists
set setprotoent d_setpent
eval $inlibc
set setproctitle d_setproctitle
eval $inlibc
+: see if setprotoent_r exists
+set setprotoent_r d_setprotoent_r
+eval $inlibc
+case "$d_setprotoent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_setprotoent_r_proto:$usethreads" in
+ ":define") d_setprotoent_r_proto=define
+ set d_setprotoent_r_proto setprotoent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_setprotoent_r_proto" in
+ define)
+ case "$setprotoent_r_proto" in
+ ''|0) try='int setprotoent_r(int, struct protoent_data*);'
+ ./protochk "extern $try" $hdrs && setprotoent_r_proto=I_ID ;;
+ esac
+ case "$setprotoent_r_proto" in
+ ''|0) try='void setprotoent_r(int, struct protoent_data*);'
+ ./protochk "extern $try" $hdrs && setprotoent_r_proto=V_ID ;;
+ esac
+ case "$setprotoent_r_proto" in
+ ''|0) d_setprotoent_r=undef
+ setprotoent_r_proto=0
+ echo "Disabling setprotoent_r, cannot determine prototype." >&4 ;;
+ * ) case "$setprotoent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) setprotoent_r_proto="REENTRANT_PROTO_$setprotoent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "setprotoent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_setprotoent_r=undef
+ setprotoent_r_proto=0
+ ;;
+ esac
+ ;;
+*) setprotoent_r_proto=0
+ ;;
+esac
+
: see if setpwent exists
set setpwent d_setpwent
eval $inlibc
+: see if setpwent_r exists
+set setpwent_r d_setpwent_r
+eval $inlibc
+case "$d_setpwent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_pwd pwd.h"
+ case "$d_setpwent_r_proto:$usethreads" in
+ ":define") d_setpwent_r_proto=define
+ set d_setpwent_r_proto setpwent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_setpwent_r_proto" in
+ define)
+ case "$setpwent_r_proto" in
+ ''|0) try='int setpwent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && setpwent_r_proto=I_H ;;
+ esac
+ case "$setpwent_r_proto" in
+ ''|0) try='void setpwent_r(FILE**);'
+ ./protochk "extern $try" $hdrs && setpwent_r_proto=V_H ;;
+ esac
+ case "$setpwent_r_proto" in
+ ''|0) d_setpwent_r=undef
+ setpwent_r_proto=0
+ echo "Disabling setpwent_r, cannot determine prototype." >&4 ;;
+ * ) case "$setpwent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) setpwent_r_proto="REENTRANT_PROTO_$setpwent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "setpwent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_setpwent_r=undef
+ setpwent_r_proto=0
+ ;;
+ esac
+ ;;
+*) setpwent_r_proto=0
+ ;;
+esac
+
: see if setregid exists
set setregid d_setregid
eval $inlibc
set setservent d_setsent
eval $inlibc
+: see if setservent_r exists
+set setservent_r d_setservent_r
+eval $inlibc
+case "$d_setservent_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_netdb netdb.h"
+ case "$d_setservent_r_proto:$usethreads" in
+ ":define") d_setservent_r_proto=define
+ set d_setservent_r_proto setservent_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_setservent_r_proto" in
+ define)
+ case "$setservent_r_proto" in
+ ''|0) try='int setservent_r(int, struct servent_data*);'
+ ./protochk "extern $try" $hdrs && setservent_r_proto=I_ID ;;
+ esac
+ case "$setservent_r_proto" in
+ ''|0) try='void setservent_r(int, struct servent_data*);'
+ ./protochk "extern $try" $hdrs && setservent_r_proto=V_ID ;;
+ esac
+ case "$setservent_r_proto" in
+ ''|0) d_setservent_r=undef
+ setservent_r_proto=0
+ echo "Disabling setservent_r, cannot determine prototype." >&4 ;;
+ * ) case "$setservent_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) setservent_r_proto="REENTRANT_PROTO_$setservent_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "setservent_r has no prototype, not using it." >&4 ;;
+ esac
+ d_setservent_r=undef
+ setservent_r_proto=0
+ ;;
+ esac
+ ;;
+*) setservent_r_proto=0
+ ;;
+esac
+
: see if setsid exists
set setsid d_setsid
eval $inlibc
set socks5_init d_socks5_init
eval $inlibc
+: see if srand48_r exists
+set srand48_r d_srand48_r
+eval $inlibc
+case "$d_srand48_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_stdlib stdlib.h"
+ case "$d_srand48_r_proto:$usethreads" in
+ ":define") d_srand48_r_proto=define
+ set d_srand48_r_proto srand48_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_srand48_r_proto" in
+ define)
+ case "$srand48_r_proto" in
+ ''|0) try='int srand48_r(long, struct drand48_data*);'
+ ./protochk "extern $try" $hdrs && srand48_r_proto=I_LS ;;
+ esac
+ case "$srand48_r_proto" in
+ ''|0) d_srand48_r=undef
+ srand48_r_proto=0
+ echo "Disabling srand48_r, cannot determine prototype." >&4 ;;
+ * ) case "$srand48_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) srand48_r_proto="REENTRANT_PROTO_$srand48_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "srand48_r has no prototype, not using it." >&4 ;;
+ esac
+ d_srand48_r=undef
+ srand48_r_proto=0
+ ;;
+ esac
+ ;;
+*) srand48_r_proto=0
+ ;;
+esac
+
+: see if srandom_r exists
+set srandom_r d_srandom_r
+eval $inlibc
+case "$d_srandom_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_stdlib stdlib.h"
+ case "$d_srandom_r_proto:$usethreads" in
+ ":define") d_srandom_r_proto=define
+ set d_srandom_r_proto srandom_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_srandom_r_proto" in
+ define)
+ case "$srandom_r_proto" in
+ ''|0) try='int srandom_r(unsigned int, struct random_data*);'
+ ./protochk "extern $try" $hdrs && srandom_r_proto=I_TS ;;
+ esac
+ case "$srandom_r_proto" in
+ ''|0) d_srandom_r=undef
+ srandom_r_proto=0
+ echo "Disabling srandom_r, cannot determine prototype." >&4 ;;
+ * ) case "$srandom_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) srandom_r_proto="REENTRANT_PROTO_$srandom_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "srandom_r has no prototype, not using it." >&4 ;;
+ esac
+ d_srandom_r=undef
+ srandom_r_proto=0
+ ;;
+ esac
+ ;;
+*) srandom_r_proto=0
+ ;;
+esac
+
: see if prototype for setresgid is available
echo " "
set d_sresgproto setresgid $i_unistd unistd.h
echo "Your stdio doesn't appear very std."
fi
$rm -f try.c try
+
+# glibc 2.2.90 and above apparently change stdio streams so Perl's
+# direct buffer manipulation no longer works. The Configure tests
+# should be changed to correctly detect this, but until then,
+# the following check should at least let perl compile and run.
+# (This quick fix should be updated before 5.8.1.)
+# To be defensive, reject all unknown versions, and all versions > 2.2.9.
+# A. Dougherty, June 3, 2002.
+case "$d_gnulibc" in
+$define)
+ case "$gnulibc_version" in
+ 2.[01]*) ;;
+ 2.2) ;;
+ 2.2.[0-9]) ;;
+ *) echo "But I will not snoop inside glibc $gnulibc_version stdio buffers."
+ val="$undef"
+ ;;
+ esac
+ ;;
+esac
set d_stdstdio
eval $setvar
fi
fi
+: see if strerror_r exists
+set strerror_r d_strerror_r
+eval $inlibc
+case "$d_strerror_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_string string.h"
+ case "$d_strerror_r_proto:$usethreads" in
+ ":define") d_strerror_r_proto=define
+ set d_strerror_r_proto strerror_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_strerror_r_proto" in
+ define)
+ case "$strerror_r_proto" in
+ ''|0) try='int strerror_r(int, char*, size_t);'
+ ./protochk "extern $try" $hdrs && strerror_r_proto=I_IBW ;;
+ esac
+ case "$strerror_r_proto" in
+ ''|0) try='int strerror_r(int, char*, int);'
+ ./protochk "extern $try" $hdrs && strerror_r_proto=I_IBI ;;
+ esac
+ case "$strerror_r_proto" in
+ ''|0) try='char* strerror_r(int, char*, size_t);'
+ ./protochk "extern $try" $hdrs && strerror_r_proto=B_IBW ;;
+ esac
+ case "$strerror_r_proto" in
+ ''|0) d_strerror_r=undef
+ strerror_r_proto=0
+ echo "Disabling strerror_r, cannot determine prototype." >&4 ;;
+ * ) case "$strerror_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) strerror_r_proto="REENTRANT_PROTO_$strerror_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "strerror_r has no prototype, not using it." >&4 ;;
+ esac
+ d_strerror_r=undef
+ strerror_r_proto=0
+ ;;
+ esac
+ ;;
+*) strerror_r_proto=0
+ ;;
+esac
+
: see if strftime exists
set strftime d_strftime
eval $inlibc
set d_telldirproto telldir $i_systypes sys/types.h $i_dirent dirent.h
eval $hasproto
+: see if time exists
+echo " "
+if test "X$d_time" = X -o X"$timetype" = X; then
+ if set time val -f d_time; eval $csym; $val; then
+ echo 'time() found.' >&4
+ val="$define"
+ rp="What is the type returned by time() on this system?"
+ set time_t timetype long stdio.h sys/types.h
+ eval $typedef_ask
+ else
+ echo 'time() not found, hope that will do.' >&4
+ val="$undef"
+ timetype='int';
+ fi
+ set d_time
+ eval $setvar
+fi
+
: see if this is a sys/times.h system
set sys/times.h i_systimes
eval $inhdr
clocktype='int'
fi
+: see if tmpnam_r exists
+set tmpnam_r d_tmpnam_r
+eval $inlibc
+case "$d_tmpnam_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h "
+ case "$d_tmpnam_r_proto:$usethreads" in
+ ":define") d_tmpnam_r_proto=define
+ set d_tmpnam_r_proto tmpnam_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_tmpnam_r_proto" in
+ define)
+ case "$tmpnam_r_proto" in
+ ''|0) try='char* tmpnam_r(char*);'
+ ./protochk "extern $try" $hdrs && tmpnam_r_proto=B_B ;;
+ esac
+ case "$tmpnam_r_proto" in
+ ''|0) d_tmpnam_r=undef
+ tmpnam_r_proto=0
+ echo "Disabling tmpnam_r, cannot determine prototype." >&4 ;;
+ * ) case "$tmpnam_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) tmpnam_r_proto="REENTRANT_PROTO_$tmpnam_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "tmpnam_r has no prototype, not using it." >&4 ;;
+ esac
+ d_tmpnam_r=undef
+ tmpnam_r_proto=0
+ ;;
+ esac
+ ;;
+*) tmpnam_r_proto=0
+ ;;
+esac
+
: see if truncate exists
set truncate d_truncate
eval $inlibc
+: see if ttyname_r exists
+set ttyname_r d_ttyname_r
+eval $inlibc
+case "$d_ttyname_r" in
+"$define")
+ hdrs="$i_systypes sys/types.h define stdio.h $i_unistd unistd.h"
+ case "$d_ttyname_r_proto:$usethreads" in
+ ":define") d_ttyname_r_proto=define
+ set d_ttyname_r_proto ttyname_r $hdrs
+ eval $hasproto ;;
+ *) ;;
+ esac
+ case "$d_ttyname_r_proto" in
+ define)
+ case "$ttyname_r_proto" in
+ ''|0) try='int ttyname_r(int, char*, size_t);'
+ ./protochk "extern $try" $hdrs && ttyname_r_proto=I_IBW ;;
+ esac
+ case "$ttyname_r_proto" in
+ ''|0) try='int ttyname_r(int, char*, int);'
+ ./protochk "extern $try" $hdrs && ttyname_r_proto=I_IBI ;;
+ esac
+ case "$ttyname_r_proto" in
+ ''|0) try='char* ttyname_r(int, char*, int);'
+ ./protochk "extern $try" $hdrs && ttyname_r_proto=B_IBI ;;
+ esac
+ case "$ttyname_r_proto" in
+ ''|0) d_ttyname_r=undef
+ ttyname_r_proto=0
+ echo "Disabling ttyname_r, cannot determine prototype." >&4 ;;
+ * ) case "$ttyname_r_proto" in
+ REENTRANT_PROTO*) ;;
+ *) ttyname_r_proto="REENTRANT_PROTO_$ttyname_r_proto" ;;
+ esac
+ echo "Prototype: $try" ;;
+ esac
+ ;;
+ *) case "$usethreads" in
+ define) echo "ttyname_r has no prototype, not using it." >&4 ;;
+ esac
+ d_ttyname_r=undef
+ ttyname_r_proto=0
+ ;;
+ esac
+ ;;
+*) ttyname_r_proto=0
+ ;;
+esac
+
: see if tzname[] exists
echo " "
if set tzname val -a d_tzname; eval $csym; $val; then
''|[nN]*) multiarch="$undef" ;;
esac
-: check for ordering of bytes in a long
+: check for ordering of bytes in a UV
echo " "
case "$usecrosscompile$multiarch" in
*$define*)
probably right.
I'm now running the test program...
EOM
- $cat >try.c <<'EOCP'
+ $cat >try.c <<EOCP
#include <stdio.h>
+#include <sys/types.h>
+typedef $uvtype UV;
int main()
{
int i;
union {
- unsigned long l;
- char c[sizeof(long)];
+ UV l;
+ char c[$uvsize];
} u;
- if (sizeof(long) > 4)
- u.l = (0x08070605L << 32) | 0x04030201L;
+ if ($uvsize > 4)
+ u.l = (((UV)0x08070605) << 32) | (UV)0x04030201;
else
- u.l = 0x04030201L;
- for (i = 0; i < sizeof(long); i++)
+ u.l = (UV)0x04030201;
+ for (i = 0; i < $uvsize; i++)
printf("%c", u.c[i]+'0');
printf("\n");
exit(0);
fi
case "$xxx_prompt" in
y)
- rp="What is the order of bytes in a long?"
+ rp="What is the order of bytes in $uvtype?"
. ./myread
byteorder="$ans"
;;
Checking to see whether you can access character data unalignedly...
EOM
-$cat >try.c <<EOCP
+case "$d_u32align" in
+'') $cat >try.c <<EOCP
#include <stdio.h>
#define U32 $u32type
#define BYTEORDER 0x$byteorder
#endif
int main() {
#if BYTEORDER == 0x1234 || BYTEORDER == 0x4321
- U8 buf[] = "\0\0\0\1\0\0\0\0";
+ U8 buf[8];
U32 *up;
int i;
signal(SIGBUS, bletch);
#endif
+ buf[0] = 0;
+ buf[1] = 0;
+ buf[2] = 0;
+ buf[3] = 1;
+ buf[5] = 0;
+ buf[6] = 0;
+ buf[7] = 0;
+ buf[8] = 1;
+
for (i = 0; i < 4; i++) {
up = (U32*)(buf + i);
if (! ((*up == 1 << (8*i)) || /* big-endian */
esac
fi
$rm -f core core.try.* try.core
+;;
+esac
: see if ualarm exists
set ualarm d_ualarm
;;
esac
-: define a fucntion to check prototypes
-$cat > protochk <<EOSH
-$startsh
-cc="$cc"
-optimize="$optimize"
-ccflags="$ccflags"
-prototype="$prototype"
-define="$define"
-rm=$rm
-EOSH
-
-$cat >> protochk <<'EOSH'
-
-$rm -f try.c
-foo="$1"
-shift
-while test $# -ge 2; do
- case "$1" in
- $define) echo "#include <$2>" >> try.c ;;
- literal) echo "$2" >> try.c ;;
- esac
- shift 2
-done
-test "$prototype" = "$define" && echo '#define CAN_PROTOTYPE' >> try.c
-cat >> try.c <<'EOCP'
-#ifdef CAN_PROTOTYPE
-#define _(args) args
-#else
-#define _(args) ()
-#endif
-EOCP
-echo "$foo" >> try.c
-echo 'int no_real_function_has_this_name _((void)) { return 0; }' >> try.c
-$cc $optimize $ccflags -c try.c > /dev/null 2>&1
-status=$?
-$rm -f try.[co]
-exit $status
-EOSH
-chmod +x protochk
-$eunicefix protochk
-
: see what type is used for size_t
rp="What is the type used for the length parameter for string functions?"
set size_t sizetype 'unsigned int' stdio.h sys/types.h
esac
fi
: locate the preferred pager for this system
+fn=f/
case "$pager" in
'')
dflt=''
'') dflt=/usr/ucb/more;;
esac
;;
-*) dflt="$pager";;
+*) dflt="$pager"
+ : Instruct ./getfile to trust the hinted or previous pager value,
+ : even if it does not begin with a slash. For example, on os2,
+ : pager might be cmd /c more. See comments in UU/getfile.
+ fn="f/($pager)"
+ ;;
esac
echo " "
-fn=f/
rp='What pager is used on your system?'
. ./getfile
pager="$ans"
eval $typedef_ask
: Find earliest binary compatible site_perl subdirectory perl can use.
-case "$bincompat5005" in
-"$define") xs_apiversion='5.005' ;;
-*) xs_apiversion=$version ;; # The current site_perl version.
-esac
+xs_apiversion=$version # The current site_perl version.
: Find earliest pure perl site_perl subdirectory perl can use.
: The versioned directories started at 5.005.
pm_apiversion='5.005'
set signal
if eval $compile_ok; then
- $run ./signal$_exe | $sort -n +1 | $uniq | $awk -f signal.awk >signal.lst
+ $run ./signal$_exe | ($sort -n -k 2 2>/dev/null || $sort -n +1) | $uniq | $awk -f signal.awk >signal.lst
else
echo "(I can't seem be able to compile the whole test program)" >&4
echo "(I'll try it in little pieces.)" >&4
done
if $test -s signal.ls1; then
$cat signal.nsg signal.ls1 |
- $sort -n +1 | $uniq | $awk -f signal.awk >signal.lst
+ $sort -n | $uniq | $awk -f signal.awk >signal.lst
fi
fi
-: see if time exists
-echo " "
-if test "X$d_time" = X -o X"$timetype" = X; then
- if set time val -f d_time; eval $csym; $val; then
- echo 'time() found.' >&4
- val="$define"
- rp="What is the type returned by time() on this system?"
- set time_t timetype long stdio.h sys/types.h
- eval $typedef_ask
- else
- echo 'time() not found, hope that will do.' >&4
- val="$undef"
- timetype='int';
- fi
- set d_time
- eval $setvar
-fi
-
: see what type uids are declared as in the kernel
echo " "
echo "Looking for the type for user ids returned by getuid()."
set libutil.h i_libutil
eval $inhdr
-: see if locale.h is available
-set locale.h i_locale
-eval $inhdr
-
: see if mach cthreads are available
if test "X$usethreads" = "X$define"; then
set mach/cthreads.h i_machcthr
: see if ndbm.h is available
set ndbm.h t_ndbm
eval $inhdr
+
+case "$t_ndbm" in
+$undef)
+ # Some Linux distributions such as RedHat 7.1 put the
+ # ndbm.h header in /usr/include/gdbm/ndbm.h.
+ if $test -f /usr/include/gdbm/ndbm.h; then
+ echo '<gdbm/ndbm.h> found.'
+ ccflags="$ccflags -I/usr/include/gdbm"
+ cppflags="$cppflags -I/usr/include/gdbm"
+ t_ndbm=$define
+ fi
+ ;;
+esac
+
case "$t_ndbm" in
$define)
: see if dbm_open exists
do
case "\$i" in
-D*) echo "\$i" | $sed 's/^-D//';;
- -A*) $test "$gccversion" && echo "\$i" | $sed 's/^-A\(.*\)(\(.*\))/\1=\2/';;
+ -A*) $test "$gccversion" && echo "\$i" | $sed 's/^-A//' | $sed 's/\(.*\)(\(.*\))/\1=\2/';;
esac
done
$rm -f try.c
val=$val2; set i_sgtty; eval $setvar
val=$val3; set i_termios; eval $setvar
-: see if this is a shadow.h system
-set shadow.h i_shadow
-eval $inhdr
-
: see if stddef is available
set stddef.h i_stddef
eval $inhdr
else
if $test -d $xxx -a $# -lt 10; then
set $1$xxx/ $*;
- cd $xxx;
+ cd "$xxx";
eval $find_extensions;
cd ..;
shift;
esac;
done'
tdir=`pwd`
-cd $rsrc/ext
+cd "$rsrc/ext"
set X
shift
eval $find_extensions
set X $known_extensions
shift
known_extensions="$*"
-cd $tdir
+cd "$tdir"
: Now see which are supported on this system.
avail_ext=''
esac
esac
;;
- threads|threads/shared)
- case "$usethreads" in
- true|$define|y)
- case "$useithreads" in
- $define|true|[yY]*) avail_ext="$avail_ext $xxx" ;;
- esac
+ XS/APItest|xs/apitest)
+ # This is just for testing. Skip it unless we have dynamic loading.
+
+ case "$usedl" in
+ $define) avail_ext="$avail_ext $xxx" ;;
esac
;;
+ XS/Typemap|xs/typemap)
+ # This is just for testing. Skip it unless we have dynamic loading.
+ case "$usedl" in
+ $define) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
+ threads|threads/shared)
+ # threads and threads::shared are special cases.
+ # To stop people from asking "Perl 5.8.0 was supposed
+ # to have this new fancy threads implementation but my
+ # perl doesn't have it" and from people trying to
+ # (re)install the threads module using CPAN.pm and
+ # CPAN.pm then offering to reinstall Perl 5.8.0,
+ # the threads.pm and threads/shared.pm will always be
+ # there, croaking informatively ("you need to rebuild
+ # all of Perl with threads, sorry") when threads haven't
+ # been compiled in.
+ # --jhi
+ avail_ext="$avail_ext $xxx"
+ ;;
IPC/SysV|ipc/sysv)
: XXX Do we need a useipcsysv variable here
case "${d_msg}${d_sem}${d_shm}" in
esac
;;
esac
+#
+# Encode is a special case. If we are building Encode as a static
+# extension, we need to explicitly list its subextensions as well.
+# For other nested extensions, this is handled automatically by
+# the appropriate Makefile.PL.
+case " $static_ext " in
+ *" Encode "*) # Add the subextensions of Encode
+ cd "$rsrc/ext"
+ for xxx in `ls Encode/*/Makefile.PL|awk -F/ '{print $2}'`; do
+ static_ext="$static_ext Encode/$xxx"
+ done
+ cd "$tdir"
+ ;;
+esac
set X $dynamic_ext $static_ext $nonxs_ext
shift
archname64='$archname64'
archname='$archname'
archobjs='$archobjs'
+asctime_r_proto='$asctime_r_proto'
awk='$awk'
baserev='$baserev'
bash='$bash'
bin='$bin'
-bincompat5005='$bincompat5005'
binexp='$binexp'
bison='$bison'
byacc='$byacc'
cpprun='$cpprun'
cppstdin='$cppstdin'
cppsymbols='$cppsymbols'
+crypt_r_proto='$crypt_r_proto'
cryptlib='$cryptlib'
csh='$csh'
+ctermid_r_proto='$ctermid_r_proto'
+ctime_r_proto='$ctime_r_proto'
d_Gconvert='$d_Gconvert'
d_PRIEUldbl='$d_PRIEUldbl'
d_PRIFUldbl='$d_PRIFUldbl'
d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_archlib='$d_archlib'
+d_asctime_r='$d_asctime_r'
d_atolf='$d_atolf'
d_atoll='$d_atoll'
d_attribut='$d_attribut'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
-d_bincompat5005='$d_bincompat5005'
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdsetpgrp='$d_bsdsetpgrp'
d_cmsghdr_s='$d_cmsghdr_s'
d_const='$d_const'
d_crypt='$d_crypt'
+d_crypt_r='$d_crypt_r'
d_csh='$d_csh'
+d_ctermid_r='$d_ctermid_r'
+d_ctime_r='$d_ctime_r'
d_cuserid='$d_cuserid'
d_dbl_dig='$d_dbl_dig'
d_dbminitproto='$d_dbminitproto'
d_dlopen='$d_dlopen'
d_dlsymun='$d_dlsymun'
d_dosuid='$d_dosuid'
+d_drand48_r='$d_drand48_r'
d_drand48proto='$d_drand48proto'
d_dup2='$d_dup2'
d_eaccess='$d_eaccess'
d_endgrent='$d_endgrent'
+d_endgrent_r='$d_endgrent_r'
d_endhent='$d_endhent'
+d_endhostent_r='$d_endhostent_r'
d_endnent='$d_endnent'
+d_endnetent_r='$d_endnetent_r'
d_endpent='$d_endpent'
+d_endprotoent_r='$d_endprotoent_r'
d_endpwent='$d_endpwent'
+d_endpwent_r='$d_endpwent_r'
d_endsent='$d_endsent'
+d_endservent_r='$d_endservent_r'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fchdir='$d_fchdir'
d_getespwnam='$d_getespwnam'
d_getfsstat='$d_getfsstat'
d_getgrent='$d_getgrent'
+d_getgrent_r='$d_getgrent_r'
+d_getgrgid_r='$d_getgrgid_r'
+d_getgrnam_r='$d_getgrnam_r'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_gethbyname='$d_gethbyname'
d_gethent='$d_gethent'
d_gethname='$d_gethname'
+d_gethostbyaddr_r='$d_gethostbyaddr_r'
+d_gethostbyname_r='$d_gethostbyname_r'
+d_gethostent_r='$d_gethostent_r'
d_gethostprotos='$d_gethostprotos'
d_getitimer='$d_getitimer'
d_getlogin='$d_getlogin'
+d_getlogin_r='$d_getlogin_r'
d_getmnt='$d_getmnt'
d_getmntent='$d_getmntent'
d_getnbyaddr='$d_getnbyaddr'
d_getnbyname='$d_getnbyname'
d_getnent='$d_getnent'
+d_getnetbyaddr_r='$d_getnetbyaddr_r'
+d_getnetbyname_r='$d_getnetbyname_r'
+d_getnetent_r='$d_getnetent_r'
d_getnetprotos='$d_getnetprotos'
d_getpagsz='$d_getpagsz'
d_getpbyname='$d_getpbyname'
d_getpgrp='$d_getpgrp'
d_getppid='$d_getppid'
d_getprior='$d_getprior'
+d_getprotobyname_r='$d_getprotobyname_r'
+d_getprotobynumber_r='$d_getprotobynumber_r'
+d_getprotoent_r='$d_getprotoent_r'
d_getprotoprotos='$d_getprotoprotos'
d_getprpwnam='$d_getprpwnam'
d_getpwent='$d_getpwent'
+d_getpwent_r='$d_getpwent_r'
+d_getpwnam_r='$d_getpwnam_r'
+d_getpwuid_r='$d_getpwuid_r'
d_getsbyname='$d_getsbyname'
d_getsbyport='$d_getsbyport'
d_getsent='$d_getsent'
+d_getservbyname_r='$d_getservbyname_r'
+d_getservbyport_r='$d_getservbyport_r'
+d_getservent_r='$d_getservent_r'
d_getservprotos='$d_getservprotos'
d_getspnam='$d_getspnam'
+d_getspnam_r='$d_getspnam_r'
d_gettimeod='$d_gettimeod'
+d_gmtime_r='$d_gmtime_r'
d_gnulibc='$d_gnulibc'
d_grpasswd='$d_grpasswd'
d_hasmntopt='$d_hasmntopt'
d_lchown='$d_lchown'
d_ldbl_dig='$d_ldbl_dig'
d_link='$d_link'
+d_localtime_r='$d_localtime_r'
d_locconv='$d_locconv'
d_lockf='$d_lockf'
d_longdbl='$d_longdbl'
d_nice='$d_nice'
d_nl_langinfo='$d_nl_langinfo'
d_nv_preserves_uv='$d_nv_preserves_uv'
-d_nv_preserves_uv_bits='$d_nv_preserves_uv_bits'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_pwquota='$d_pwquota'
d_qgcvt='$d_qgcvt'
d_quad='$d_quad'
+d_random_r='$d_random_r'
+d_readdir64_r='$d_readdir64_r'
d_readdir='$d_readdir'
+d_readdir_r='$d_readdir_r'
d_readlink='$d_readlink'
d_readv='$d_readv'
d_recvmsg='$d_recvmsg'
d_setegid='$d_setegid'
d_seteuid='$d_seteuid'
d_setgrent='$d_setgrent'
+d_setgrent_r='$d_setgrent_r'
d_setgrps='$d_setgrps'
d_sethent='$d_sethent'
+d_sethostent_r='$d_sethostent_r'
d_setitimer='$d_setitimer'
d_setlinebuf='$d_setlinebuf'
d_setlocale='$d_setlocale'
+d_setlocale_r='$d_setlocale_r'
d_setnent='$d_setnent'
+d_setnetent_r='$d_setnetent_r'
d_setpent='$d_setpent'
d_setpgid='$d_setpgid'
d_setpgrp2='$d_setpgrp2'
d_setpgrp='$d_setpgrp'
d_setprior='$d_setprior'
d_setproctitle='$d_setproctitle'
+d_setprotoent_r='$d_setprotoent_r'
d_setpwent='$d_setpwent'
+d_setpwent_r='$d_setpwent_r'
d_setregid='$d_setregid'
d_setresgid='$d_setresgid'
d_setresuid='$d_setresuid'
d_setrgid='$d_setrgid'
d_setruid='$d_setruid'
d_setsent='$d_setsent'
+d_setservent_r='$d_setservent_r'
d_setsid='$d_setsid'
d_setvbuf='$d_setvbuf'
d_sfio='$d_sfio'
d_sockpair='$d_sockpair'
d_socks5_init='$d_socks5_init'
d_sqrtl='$d_sqrtl'
+d_srand48_r='$d_srand48_r'
+d_srandom_r='$d_srandom_r'
d_sresgproto='$d_sresgproto'
d_sresuproto='$d_sresuproto'
d_statblks='$d_statblks'
d_strctcpy='$d_strctcpy'
d_strerrm='$d_strerrm'
d_strerror='$d_strerror'
+d_strerror_r='$d_strerror_r'
d_strftime='$d_strftime'
d_strtod='$d_strtod'
d_strtol='$d_strtol'
d_telldirproto='$d_telldirproto'
d_time='$d_time'
d_times='$d_times'
+d_tm_tm_gmtoff='$d_tm_tm_gmtoff'
+d_tm_tm_zone='$d_tm_tm_zone'
+d_tmpnam_r='$d_tmpnam_r'
d_truncate='$d_truncate'
+d_ttyname_r='$d_ttyname_r'
d_tzname='$d_tzname'
d_u32align='$d_u32align'
d_ualarm='$d_ualarm'
dlsrc='$dlsrc'
doublesize='$doublesize'
drand01='$drand01'
+drand48_r_proto='$drand48_r_proto'
dynamic_ext='$dynamic_ext'
eagain='$eagain'
ebcdic='$ebcdic'
echo='$echo'
egrep='$egrep'
emacs='$emacs'
+endgrent_r_proto='$endgrent_r_proto'
+endhostent_r_proto='$endhostent_r_proto'
+endnetent_r_proto='$endnetent_r_proto'
+endprotoent_r_proto='$endprotoent_r_proto'
+endpwent_r_proto='$endpwent_r_proto'
+endservent_r_proto='$endservent_r_proto'
eunicefix='$eunicefix'
exe_ext='$exe_ext'
expr='$expr'
full_sed='$full_sed'
gccosandvers='$gccosandvers'
gccversion='$gccversion'
+getgrent_r_proto='$getgrent_r_proto'
+getgrgid_r_proto='$getgrgid_r_proto'
+getgrnam_r_proto='$getgrnam_r_proto'
+gethostbyaddr_r_proto='$gethostbyaddr_r_proto'
+gethostbyname_r_proto='$gethostbyname_r_proto'
+gethostent_r_proto='$gethostent_r_proto'
+getlogin_r_proto='$getlogin_r_proto'
+getnetbyaddr_r_proto='$getnetbyaddr_r_proto'
+getnetbyname_r_proto='$getnetbyname_r_proto'
+getnetent_r_proto='$getnetent_r_proto'
+getprotobyname_r_proto='$getprotobyname_r_proto'
+getprotobynumber_r_proto='$getprotobynumber_r_proto'
+getprotoent_r_proto='$getprotoent_r_proto'
+getpwent_r_proto='$getpwent_r_proto'
+getpwnam_r_proto='$getpwnam_r_proto'
+getpwuid_r_proto='$getpwuid_r_proto'
+getservbyname_r_proto='$getservbyname_r_proto'
+getservbyport_r_proto='$getservbyport_r_proto'
+getservent_r_proto='$getservent_r_proto'
+getspnam_r_proto='$getspnam_r_proto'
gidformat='$gidformat'
gidsign='$gidsign'
gidsize='$gidsize'
gidtype='$gidtype'
glibpth='$glibpth'
gmake='$gmake'
+gmtime_r_proto='$gmtime_r_proto'
+gnulibc_version='$gnulibc_version'
grep='$grep'
groupcat='$groupcat'
groupstype='$groupstype'
i8type='$i8type'
i_arpainet='$i_arpainet'
i_bsdioctl='$i_bsdioctl'
+i_crypt='$i_crypt'
i_db='$i_db'
i_dbm='$i_dbm'
i_dirent='$i_dirent'
lkflags='$lkflags'
ln='$ln'
lns='$lns'
+localtime_r_proto='$localtime_r_proto'
locincpth='$locincpth'
loclibpth='$loclibpth'
longdblsize='$longdblsize'
nvEUformat='$nvEUformat'
nvFUformat='$nvFUformat'
nvGUformat='$nvGUformat'
+nv_preserves_uv_bits='$nv_preserves_uv_bits'
nveformat='$nveformat'
nvfformat='$nvfformat'
nvgformat='$nvgformat'
quadtype='$quadtype'
randbits='$randbits'
randfunc='$randfunc'
+random_r_proto='$random_r_proto'
randseedtype='$randseedtype'
ranlib='$ranlib'
rd_nodata='$rd_nodata'
+readdir64_r_proto='$readdir64_r_proto'
+readdir_r_proto='$readdir_r_proto'
revision='$revision'
rm='$rm'
rmail='$rmail'
selectminbits='$selectminbits'
selecttype='$selecttype'
sendmail='$sendmail'
+setgrent_r_proto='$setgrent_r_proto'
+sethostent_r_proto='$sethostent_r_proto'
+setlocale_r_proto='$setlocale_r_proto'
+setnetent_r_proto='$setnetent_r_proto'
+setprotoent_r_proto='$setprotoent_r_proto'
+setpwent_r_proto='$setpwent_r_proto'
+setservent_r_proto='$setservent_r_proto'
sh='$sh'
shar='$shar'
sharpbang='$sharpbang'
sort='$sort'
spackage='$spackage'
spitshell='$spitshell'
+srand48_r_proto='$srand48_r_proto'
+srandom_r_proto='$srandom_r_proto'
src='$src'
ssizetype='$ssizetype'
startperl='$startperl'
stdio_filbuf='$stdio_filbuf'
stdio_ptr='$stdio_ptr'
stdio_stream_array='$stdio_stream_array'
+strerror_r_proto='$strerror_r_proto'
strings='$strings'
submit='$submit'
subversion='$subversion'
test='$test'
timeincl='$timeincl'
timetype='$timetype'
+tmpnam_r_proto='$tmpnam_r_proto'
to='$to'
touch='$touch'
tr='$tr'
trnl='$trnl'
troff='$troff'
+ttyname_r_proto='$ttyname_r_proto'
u16size='$u16size'
u16type='$u16type'
u32size='$u32size'
exec 1>&4
pwd=`pwd`
. ./UU/extract
-cd $pwd
+cd "$pwd"
if $contains '^depend:' [Mm]akefile >/dev/null 2>&1; then
dflt=y