use Config ;
use File::Spec ;
-use BuildStem ;
use Data::Dumper ;
-# I wonder if I should add the ability to put the Docs and Design etc
-# directories in apropriate spots, like
-# /usr/local/share/stem (site) or /usr/share/stem (vendor)
-
-my %requires ;
+use BuildStem ;
-my $version_from = File::Spec->catfile( File::Spec->curdir, 'lib', 'Stem.pm' );
+my $version_from = File::Spec->catfile(
+ File::Spec->curdir, 'lib', 'Stem.pm'
+);
my $build = BuildStem->new(
-#my $build = $class->new(
- module_name => 'Stem',
- dist_version_from => $version_from,
- requires => \%requires,
- dist_abstract => 'ABSTRACT GOES HERE',
- license => 'gpl',
- dynamic_config => 1,
- recursive_test_files => 1,
- create_makefile_pl => 'passthrough'
+ module_name => 'Stem',
+ dist_version_from => $version_from,
+ requires => {
+ YAML => 0,
+ },
+ dist_abstract =>
+ 'An asynchronous message passing framework for Perl',
+ license => 'gpl',
+ dynamic_config => 1,
+ recursive_test_files => 1,
+ needs_compiler => 0,
+ recommends => {
+ DBI => 0,
+ Event => 0,
+ },
+ create_makefile_pl => 'passthrough'
);
-$build->is_unixish() || die "Stem currently only installs properly on *nix-like platforms.\n";
+$build->is_unixish() or
+ die "Stem currently only installs properly on *nix-like platforms.\n";
-### this will come in handy for some refactoring...
-## $build->config( 'install_base' )
-print <<'EOT';
+### ask about the config path and where to install bundled config files
-Stem comes with a utility called 'run_stem' which takes care of things
-like initalizing Stem with a configuration file and controlling it's
-operation via various parameters you can pass in as environment
-variables or command line arguments.
+print <<'EOT';
-Stem configuration files are used to create and initialize Stem Cells
-(objects). run_stem can search a path list for config files, so you
-can set that list of directories here.
+Stem configuration files are used to create and initialize Stem Cells.
+An included program called 'run_stem' will search a default path for
+a specified config file and use it to get everything going. You can see
+this in action if you check out Stem's demo scripts.
Note that you can easily override this path with either a shell environment
-variable or on the command line of run_stem. See the documentation on
-run_stem for how so do this.
-
-The last directory in the list is where the standard and demo Stem
-configuration files will be installed.
+variable or a command line agrument. See the documentation on run_stem for
+how to do this.
EOT
-my $conf_path = $build->prompt(
- "Please enter a list of directory paths separated by ':'\n",
+$build->config_data(
+ conf_path => scalar $build->prompt(
+ "Please enter a list of directory paths separated by ':'\n",
'.:~/.stem/conf:/usr/local/stem/conf'
+ )
);
-$build->config_data(conf_path => $conf_path);
+print <<'EOT';
-print "\n\nChecking to see if you have a good C compiler...\n\n" ;
-if ( $build->have_c_compiler() ) {
- print <<'EOT';
+Where would you like to install the config files bundled with Stem?
+If you specify a directory not already in the path above, it will be
+appended. If this directory does not exist, it will be created.
+EOT
-ssfe (Split Screen Front End) is a compiled program optionally used by
-the Stem demonstration scripts that provides a full screen interface
-with command line editing and history. It is not required to run Stem
-but it makes the demonstrations easier to work with and they look much
-nicer. To use ssfe add the '-s' option when you run any demonstration
-script. You can also use ssfe for your own programs. If you build ssfe
-it will be installed in the demo/ directory. You may copy it to a place
-in your $PATH is you wish.
+$build->config_data(
+ conf_dir => scalar $build->prompt(
+ "Please enter a directory path:\n",
+ '/usr/local/stem/conf'
+ )
+);
-EOT
- my $build_ssfe = $build->y_n("Do you want to build ssfe?\n", 'y');
- $build->config_data(build_ssfe => $build_ssfe);
+### add the conf_dir to the conf_path, if necessary
+{
+ my $conf_path = $build->config_data( 'conf_path' );
+ my $conf_dir = $build->config_data( 'conf_dir' );
+ if ( $conf_path =~ /(^|:)\Q$conf_dir\E(:|$)/ ) {
+ $build->config_data( conf_path => "$conf_path:$conf_dir" );
+ }
}
+
+### ask about building the demo scripts
print <<'EOT';
Stem comes with a variety of demos to show how to get started and do some
-basic things. If you wish, they can be configured to run locally out of the
-demo/ directory.
+basic things. If you wish to try them they will be available in the demo/
+directory after you run ./Build. In any case, they will not be installed
+to the system, even after you install the rest of Stem.
EOT
-my $build_demos = $build->y_n("\nDo you want to build the demos?\n",'y');
-$build->config_data(build_demos => $build_demos);
-if ( $build_demos ) {
- # Check for telnet
+$build->config_data(
+ build_demos => scalar $build->y_n(
+ "Do you want to build the demos?\n", 'y'
+ )
+);
+
+
+if ( $build->config_data( 'build_demos' ) ) {
+
+
+ ### Try to find telnet
my $telnet_path = $build->find_binary( 'telnet' ) || '' ;
while ( ! -x $telnet_path && ! $build->_is_unattended() ) {
print <<'EOT';
-telnet was not found on this system. you can't run the demo programs
-without telnet. Make sure you enter a valid path to telnet or some other
-terminal emulator.
-
-NOTE: If you don't have an telnet, you can still run the demo scripts
-by hand. Run a *_demo script and see what telnet commands it
-issues. The run those telnet commands using your telnet or another
-similar program.
+telnet was not found on this system. the demo programs won't run properly
+without telnet. Please enter a valid path to telnet, or a single <space>
+to give up trying.
EOT
$telnet_path = $build->prompt(
"Enter the path to telnet "
. "(or another compatible telnet client)",
- '/usr/bin/telnet'
+ '/usr/bin/telnet'
) ;
+ last if $telnet_path =~ s/^\w+$//;
}
- $build->config_data( telnet_path => $telnet_path ) ;
+ $build->config_data( telnet_path => $telnet_path || undef ) ;
+
+
- # Check for xterm
+ # Try to find xterm
my $xterm_path = $build->find_binary( 'xterm' ) || '' ;
while ( ! -x $xterm_path && ! $build->_is_unattended() ) {
- print <<'EOT';
+ print <<'EOT';
+
+xterm was not found on this system. the demo programs won't run properly
+without xterm. Please enter a valid path to xterm or a single <space> to
+give up trying.
+
+EOT
+ $xterm_path = $build->prompt(
+ "Enter the path to xterm "
+ . "(or another compatible terminal emulator)",
+ '/usr/bin/xterm'
+ ) ;
+ last if $xterm_path =~ s/^\w+$//;
+ }
+ $build->config_data( xterm_path => $xterm_path || undef ) ;
-xterm was not found on this system. you can't run the demo programs
-without xterm. Make sure you enter a valid path to xterm or some other
-terminal emulator.
+ ### Only build ssfe if we have a working C compiler
+ if ( $build->have_c_compiler() ) {
+ print <<'EOT';
-NOTE: If you don't have an xterm, you can still run the demo scripts
-by hand. Run a *_demo script and see what commands it issues. Take the
-part after the -e and run that command in its own terminal window.
+ssfe (Split Screen Front End) is a compiled program optionally used by
+the Stem demonstration scripts that provides a full screen interface
+with command line editing and history. It is not required to run Stem
+but it makes the demonstrations easier to work with and they look much
+nicer. To use ssfe add the '-s' option when you run any demonstration
+script. You can also use ssfe for your own programs. If you build ssfe
+it will be installed in the demo/ directory. You may copy it to a place
+in your $PATH is you wish.
EOT
- $xterm_path = $build->prompt(
- "Enter the path to xterm "
- . "(or another compatible terminal emulator)",
- '/usr/bin/xterm'
- ) ;
+ $build->config_data(
+ build_ssfe => scalar $build->y_n(
+ "Do you want to build ssfe for the demos?\n", 'y'
+ )
+ );
+ }
}
- $build->config_data( xterm_path => $xterm_path ) ;
-}
+### NOTE: find out whether or not each of the following
+### config_data settings are actually being *used* for anything
+
my $script_dest = $build->install_destination('script') ;
my $run_stem_path = File::Spec->catfile( $script_dest, 'run_stem' ) ;
$build->config_data( run_stem_path => $run_stem_path ) ;