#
# * Minimum perl officially supported by DBIC is 5.8.3. This *includes* the
# basic depchain. On failure either attempt to fix it or bring it to the
-# attention of ribasushi. *DO NOT* disable 5.8 testing - it is here for a
-# reason
-#
-# * The matrix is built from two main modes - CLEANTEST = [true|false].
-# - In the first case we test with minimal deps available, and skip everything
-# listed in DBIC::OptDesps. The modules are installed with classic CPAN
-# invocations and are *fully tested*. In other words we simulate what would
-# happen if a user tried to install on a just-compiled virgin perl
-# - Without CLEANTEST we bring the armada of RDBMS and install the maximum
-# possible set of deps *without testing them*. This ensures we stay within
-# a reasonable build-time and still run as many of our tests as possible
-#
-# * The perl builds and the DBIC tests run under NUMTHREADS number of threads.
-# The testing of dependencies under CLEANTEST runs single-threaded, at least
-# until we fix our entire dep-chain to safely pass under -j
-#
-# * The way .travis.yml is fed to the command controller is idiotic - it
-# makes using multiline `bash -c` statements impossible. Therefore to
-# aid readability (our travis logic is rather complex), the bulk of
-# functionality is moved to scripts. More about the problem (and the
-# WONTFIX "explanation") here: https://github.com/travis-ci/travis-ci/issues/497
+# attention of the maintainer. *DO NOT* disable 5.8 testing - it is here for
+# a very good reason
#
+# the entire run times out after 50 minutes, or after 5 minutes without
+# console output
#
# Smoke all branches except for blocked* and wip/*
-#
-# Additionally master does not smoke with bleadperl
-# ( implemented in maint/travis-ci_scripts/10_before_install.bash )
-#
branches:
except:
- /^wip\//
email:
recipients:
- - ribasushi@cpan.org
- # Temporary - if it proves to be too noisy, we'll shut it off
- #- dbix-class-devel@lists.scsys.co.uk
+ - CPAN-CI@leporine.io
on_success: change
on_failure: always
+addons:
+ apt:
+ packages:
+ - libapp-nopaste-perl
+ - net-tools
+
+# This is probably a net-loss for setup etc - a bare 'C' will likely fare much better
language: perl
-perl:
- - "5.18"
+# Currently not trying osx: https://github.com/travis-ci/travis-ci/issues/2314
+os: linux
-env:
- - CLEANTEST=false
- - CLEANTEST=true
+# The defaults run under the more rapid container infra. The hardware is
+# actually *much* slower, but the jobs start much faster, for more info see
+# https://docs.travis-ci.com/user/ci-environment/#Virtualization-environments
+# Combined with 'fast_finish' this will result in an "uh-oh" email as early
+# as possible
+dist: precise
+sudo: false
+env: CLEANTEST=true
+
+perl:
+ - "5.8"
+ - "5.10"
+ - "5.22-extras"
matrix:
+ fast_finish: true
+
include:
- # minimum supported with threads
- - perl: 5.8.5_thr
+
+ # Same as the "master matrix" above, frozen under older dist/infrastructure
+ # In genereal it is strongly recommended to keep things on the older
+ # version indefinitely - there is little value in-depth smoking on
+ # more recent software stacks
+ - perl: "5.8"
+ sudo: required
+ dist: precise
env:
- CLEANTEST=false
- - BREWOPTS="-Duseithreads"
- - BREWVER=5.8.5
- - DBIC_TRACE_PROFILE=console
- # minimum supported without threads
- - perl: 5.8.3_nt
+ - perl: "5.10"
+ sudo: required
+ dist: precise
+ env:
+ - CLEANTEST=false
+
+ - perl: "5.22-extras"
+ sudo: required
+ dist: precise
env:
- CLEANTEST=false
- - BREWOPTS=""
- - BREWVER=5.8.3
- - DBIC_TRACE_PROFILE=console_monochrome
- # check CLEANTEST of minimum supported
- - perl: 5.8.3_nt_mb
+ # CLEANTEST of minimum supported with non-tracing poisoning, single thread (hence the sudo)
+ - perl: "5.8.3_nt_mb"
+ sudo: required
+ dist: precise
env:
+ - VCPU_USE=1
- CLEANTEST=true
+ - POISON_ENV=true
+ - DBIC_TRACE_PROFILE=console_monochrome
+ - BREWVER=5.8.3
- BREWOPTS="-Dusemorebits"
+
+ # Full Test of minimum supported without threads with plain poisoned trace
+ - perl: "5.8.3_nt"
+ sudo: required
+ dist: precise
+ # run these under legacy - great simulation of low memory env
+ group: legacy
+ env:
+ - CLEANTEST=false
+ - POISON_ENV=true
+ - DBIC_TRACE=1
- BREWVER=5.8.3
- # this is the perl suse ships
- - perl: 5.10.0_thr_dbg
+ # Full Test of minimum supported with threads with non-tracing poisoning
+ - perl: "5.8.5_thr"
+ sudo: required
+ dist: precise
+ # run these under legacy - great simulation of low memory env
+ group: legacy
+ env:
+ - CLEANTEST=false
+ - POISON_ENV=true
+ - DBIC_TRACE_PROFILE=console
+ - BREWVER=5.8.5
+ - BREWOPTS="-Duseithreads"
+
+ # CLEANTEST of solaris-like perl with non-tracing poisoning
+ - perl: "5.8.4_nt"
+ sudo: false
+ dist: precise
env:
- CLEANTEST=true
- - BREWOPTS="-DDEBUGGING -Duseithreads"
+ - POISON_ENV=true
+ - DBIC_TRACE_PROFILE=console
+ - BREWVER=5.8.4
+
+ # Full test: this particular perl is quite widespread, single thread
+ - perl: "5.8.8_thr"
+ sudo: required
+ dist: precise
+ group: legacy
+ env:
+ - VCPU_USE=1
+ - CLEANTEST=false
+ - BREWVER=5.8.8
+ - BREWOPTS="-Duseithreads"
+
+ # CLEANTEST: this is the perl suse ships, with env poisoning
+ - perl: "5.10.0_thr_dbg"
+ sudo: false
+ dist: precise
+ env:
+ - CLEANTEST=true
+ - POISON_ENV=true
- BREWVER=5.10.0
+ - BREWOPTS="-DDEBUGGING -Duseithreads"
- # this particular perl is quite widespread
- - perl: 5.8.8_thr_mb
+ # CLEANTEST: this one is in a number of debian-based LTS (test a sane CPAN.pm, single thread)
+ - perl: "5.14.2_thr_mb"
+ sudo: required
+ dist: precise
env:
+ - VCPU_USE=1
- CLEANTEST=true
+ - BREWVER=5.14.2
- BREWOPTS="-Duseithreads -Dusemorebits"
- - BREWVER=5.8.8
+ ###
# some permutations of tracing and envvar poisoning
- - perl: 5.18
- env:
- - CLEANTEST=false
- - POISON_ENV=true
- - perl: 5.18
+ - perl: "5.12.3_thr"
+ sudo: false
+ dist: precise
env:
- CLEANTEST=true
- POISON_ENV=true
- DBIC_TRACE=1
+ - DBIC_MULTICREATE_DEBUG=1
+ - DBIC_STORAGE_RETRY_DEBUG=1
- DBIC_TRACE_PROFILE=console
+ - BREWVER=5.12.3
+ - BREWOPTS="-Duseithreads"
+
+ - perl: "5.16.3_thr_mb"
+ sudo: required
+ dist: precise
+ env:
+ - CLEANTEST=false
+ - DBIC_TRACE=1
+ - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
+ - BREWVER=5.16.3
+ - BREWOPTS="-Duseithreads -Dusemorebits"
- - perl: 5.18
+ - perl: "5.18-extras"
+ sudo: required
+ # explicit new infra spec preparing for a future forced upgrade
+ dist: trusty
env:
- CLEANTEST=false
- POISON_ENV=true
- DBIC_TRACE=1
- DBIC_TRACE_PROFILE=console_monochrome
+ - DBICTEST_VIA_REPLICATED=0
+ - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
+
+ # MAKE SURE TO KEEP THE FLAGS IDENTICAL TO CPERL BELOW
+ # allows for easier side-by-side comparison
+ # vcpu=1 for even more stable results
+ - perl: "5.22.2_thr_qm"
+ # explicit new infra spec preparing for a future forced upgrade
+ # also need to pull in a sufficiently new compiler for quadmath.h
+ sudo: required
+ dist: trusty
+ env:
+ - VCPU_USE=1
+ - CLEANTEST=true
+ - POISON_ENV=true
+ - MVDT=false
+ - BREWVER=5.22.2
+ - BREWOPTS="-Duseithreads -Dusequadmath"
###
# Start of the allow_failures block
- # bleadperl
- - perl: bleadperl_thr_mb
+ # MAKE SURE TO KEEP THE FLAGS IDENTICAL TO STOCK 5.latest.comparable ABOVE
+ # allows for easier side-by-side comparison
+ # vcpu=1 for even more stable results
+ - perl: "cperl-5.22.3_thr_qm"
+ # explicit new infra spec preparing for a future forced upgrade
+ # also need to pull in a sufficiently new compiler for quadmath.h
+ sudo: required
+ dist: trusty
+ env:
+ - VCPU_USE=1
+ - CLEANTEST=true
+ - POISON_ENV=true
+ - MVDT=false
+ - BREWVER=cperl-5.22.3
+ - BREWOPTS="-Duseithreads -Dusequadmath"
+
+ - perl: "cperl-master_thr"
+ sudo: false
+ dist: precise
+ env:
+ - CLEANTEST=true
+ - POISON_ENV=true
+ - MVDT=false
+ - BREWVER=cperl-master
+ - BREWOPTS="-Duseithreads"
+
+ # threaded oldest possible with blead CPAN
+ - perl: "devcpan_5.8.1_thr_mb"
+ sudo: false
+ dist: precise
+ env:
+ - CLEANTEST=true
+ - DEVREL_DEPS=true
+ - BREWVER=5.8.1
+ - BREWOPTS="-Duseithreads -Dusemorebits"
+
+ # oldest possible with blead CPAN with poisoning and plain trace
+ - perl: "devcpan_5.8.1"
+ sudo: false
+ dist: precise
+ env:
+ - CLEANTEST=true
+ - DEVREL_DEPS=true
+ - POISON_ENV=true
+ - DBIC_TRACE=1
+ - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
+ - BREWVER=5.8.1
+
+ # 5.8.3 with blead CPAN
+ - perl: "devcpan_5.8.3_mb"
+ sudo: required
+ # explicit new infra spec preparing for a future forced upgrade
+ dist: trusty
env:
- CLEANTEST=false
+ - DEVREL_DEPS=true
+ - BREWVER=5.8.3
+ - BREWOPTS="-Dusemorebits"
+
+ # 5.8.7 threaded with blead CPAN with non-tracing poisoning
+ - perl: "devcpan_5.8.7_thr"
+ sudo: false
+ dist: precise
+ env:
+ - CLEANTEST=true
+ - DEVREL_DEPS=true
+ - POISON_ENV=true
+ - BREWVER=5.8.7
+ - BREWOPTS="-Duseithreads"
+
+ # 5.8.8 threaded MB (exercises P5#72210)
+ - perl: "devcpan_5.8.8_thr_mb"
+ sudo: false
+ dist: precise
+ env:
+ - CLEANTEST=true
+ - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
+ - DEVREL_DEPS=true
+ - BREWVER=5.8.8
+ - BREWOPTS="-Duseithreads -Dusemorebits"
+
+ # 5.10.0 threaded with blead CPAN
+ - perl: "devcpan_5.10.0_thr_mb"
+ sudo: false
+ dist: precise
+ env:
+ - CLEANTEST=true
+ - DEVREL_DEPS=true
+ - BREWVER=5.10.0
- BREWOPTS="-Duseithreads -Dusemorebits"
+
+ # 5.12.1 with blead CPAN
+ - perl: "devcpan_5.12.1_thr"
+ sudo: false
+ dist: precise
+ env:
+ - CLEANTEST=true
+ - DEVREL_DEPS=true
+ - BREWVER=5.12.1
+ - BREWOPTS="-Duseithreads"
+
+ # bleadperl with stock CPAN, full depchain test with non-tracing poisoning, single thread
+ - perl: "bleadperl"
+ sudo: required
+ dist: precise
+ env:
+ - VCPU_USE=1
+ - CLEANTEST=true
+ - POISON_ENV=true
+ - BREWVER=blead
+
+ # bleadperl with blead CPAN, single thread
+ - perl: "devcpan_bleadperl_thr_mb"
+ sudo: required
+ # explicitly do not specify dist - see what the default does
+ env:
+ - VCPU_USE=1
+ - CLEANTEST=false
+ - DEVREL_DEPS=true
- BREWVER=blead
+ - BREWOPTS="-Duseithreads -Dusemorebits"
+ # CLEANTEST of http://schplog.schmorp.de/2015-06-06-a-stable-perl.html with non-tracing poisoning
+ - perl: "schmorp_stableperl_thr_mb"
+ sudo: false
+ dist: precise
+ env:
+ - CLEANTEST=true
+ - POISON_ENV=true
+ - BREWVER=schmorp_stableperl
+ - BREWOPTS="-Duseithreads -Dusemorebits"
# which ones of the above can fail
allow_failures:
- - perl: bleadperl_thr_mb
+ # these run with various dev snapshots - allowed to fail
+ - perl: cperl-5.22.3_thr_qm
+ - perl: cperl-master_thr
+ - perl: devcpan_5.8.1_thr_mb
+ - perl: devcpan_5.8.1
+ - perl: devcpan_5.8.3_mb
+ - perl: devcpan_5.8.7_thr
+ - perl: devcpan_5.8.8_thr_mb
+ - perl: devcpan_5.10.0_thr_mb
+ - perl: devcpan_5.12.1_thr
+ - perl: bleadperl
+ - perl: devcpan_bleadperl_thr_mb
+ - perl: schmorp_stableperl_thr_mb
-# sourcing the files is *EXTREMELY* important - otherwise
-# no envvars will survive
-# the entire run times out after 50 minutes, or after 5 minutes without
-# console output
+###
+### For the following two phases -e is *set*
+###
before_install:
+ # common functions for all run phases below
+ #
+ # this is an exporter - sourcing it is crucial
+ # among other things it also sets -e
+ #
+ - source maint/travis-ci_scripts/common.bash
+
# Sets global envvars, downloads/configures debs based on CLEANTEST
# Sets extra DBICTEST_* envvars
#
+ # this is an exporter - sourcing it is crucial
+ #
- source maint/travis-ci_scripts/10_before_install.bash
install:
# Build and switch to a custom perl if requested
# Configure the perl env, preinstall some generic toolchain parts
+ # Possibly poison the environment
+ #
+ # this is an exporter - sourcing it is crucial
#
- source maint/travis-ci_scripts/20_install.bash
+###
+### From this point on -e is *unset*, rely on travis' error handling
+###
+ - set +e
+
before_script:
# Preinstall/install deps based on envvars/CLEANTEST
#
- - source maint/travis-ci_scripts/30_before_script.bash
+ # need to invoke the after_failure script manually
+ # because 'after_failure' runs only after 'script' fails
+ #
+ - maint/getstatus maint/travis-ci_scripts/30_before_script.bash
script:
# Run actual tests
#
- - source maint/travis-ci_scripts/40_script.bash
+ - maint/getstatus maint/travis-ci_scripts/40_script.bash
+
+###
+### Set -e back, work around https://github.com/travis-ci/travis-ci/issues/3533
+###
+ - set -e
after_success:
# Check if we can assemble a dist properly if not in CLEANTEST
#
- - source maint/travis-ci_scripts/50_after_success.bash
+ - maint/getstatus maint/travis-ci_scripts/50_after_success.bash
after_failure:
- # No tasks yet
+ # Final sysinfo printout on fail
#
- #- source maint/travis-ci_scripts/50_after_failure.bash
+ - maint/getstatus maint/travis-ci_scripts/50_after_failure.bash
after_script:
# No tasks yet
#
- #- source maint/travis-ci_scripts/60_after_script.bash
-
- # if we do not unset this before we terminate the travis teardown will
- # mark the entire job as failed
- - set +e
+ #- maint/getstatus maint/travis-ci_scripts/60_after_script.bash