=head1 NAME perlref - Perl references and nested data structures =head1 DESCRIPTION Before release 5 of Perl it was difficult to represent complex data structures, because all references had to be symbolic, and even that was difficult to do when you wanted to refer to a variable rather than a symbol table entry. Perl not only makes it easier to use symbolic references to variables, but lets you have "hard" references to any piece of data. Any scalar may hold a hard reference. Because arrays and hashes contain scalars, you can now easily build arrays of arrays, arrays of hashes, hashes of arrays, arrays of hashes of functions, and so on. Hard references are smart--they keep track of reference counts for you, automatically freeing the thing referred to when its reference count goes to zero. (Note: The reference counts for values in self-referential or cyclic data structures may not go to zero without a little help; see L for a detailed explanation. If that thing happens to be an object, the object is destructed. See L for more about objects. (In a sense, everything in Perl is an object, but we usually reserve the word for references to objects that have been officially "blessed" into a class package.) A symbolic reference contains the name of a variable, just as a symbolic link in the filesystem contains merely the name of a file. The C<*glob> notation is a kind of symbolic reference. Hard references are more like hard links in the file system: merely another way at getting at the same underlying object, irrespective of its name. "Hard" references are easy to use in Perl. There is just one overriding principle: Perl does no implicit referencing or dereferencing. When a scalar is holding a reference, it always behaves as a scalar. It doesn't magically start being an array or a hash unless you tell it so explicitly by dereferencing it. References can be constructed several ways. =over 4 =item 1. By using the backslash operator on a variable, subroutine, or value. (This works much like the & (address-of) operator works in C.) Note that this typically creates I reference to a variable, because there's already a reference to the variable in the symbol table. But the symbol table reference might go away, and you'll still have the reference that the backslash returned. Here are some examples: $scalarref = \$foo; $arrayref = \@ARGV; $hashref = \%ENV; $coderef = \&handler; $globref = \*foo; It isn't possible to create a true reference to an IO handle (filehandle or dirhandle) using the backslash operator. See the explanation of the *foo{THING} syntax below. (However, you're apt to find Perl code out there using globrefs as though they were IO handles, which is grandfathered into continued functioning.) =item 2. A reference to an anonymous array can be constructed using square brackets: $arrayref = [1, 2, ['a', 'b', 'c']]; Here we've constructed a reference to an anonymous array of three elements whose final element is itself reference to another anonymous array of three elements. (The multidimensional syntax described later can be used to access this. For example, after the above, C<$arrayref-E[2][1]> would have the value "b".) Note that taking a reference to an enumerated list is not the same as using square brackets--instead it's the same as creating a list of references! @list = (\$a, \@b, \%c); @list = \($a, @b, %c); # same thing! As a special case, C<\(@foo)> returns a list of references to the contents of C<@foo>, not a reference to C<@foo> itself. Likewise for C<%foo>. =item 3. A reference to an anonymous hash can be constructed using curly brackets: $hashref = { 'Adam' => 'Eve', 'Clyde' => 'Bonnie', }; Anonymous hash and array constructors can be intermixed freely to produce as complicated a structure as you want. The multidimensional syntax described below works for these too. The values above are literals, but variables and expressions would work just as well, because assignment operators in Perl (even within local() or my()) are executable statements, not compile-time declarations. Because curly brackets (braces) are used for several other things including BLOCKs, you may occasionally have to disambiguate braces at the beginning of a statement by putting a C<+> or a C in front so that Perl realizes the opening brace isn't starting a BLOCK. The economy and mnemonic value of using curlies is deemed worth this occasional extra hassle. For example, if you wanted a function to make a new hash and return a reference to it, you have these options: sub hashem { { @_ } } # silently wrong sub hashem { +{ @_ } } # ok sub hashem { return { @_ } } # ok =item 4. A reference to an anonymous subroutine can be constructed by using C without a subname: $coderef = sub { print "Boink!\n" }; Note the presence of the semicolon. Except for the fact that the code inside isn't executed immediately, a C is not so much a declaration as it is an operator, like C or C. (However, no matter how many times you execute that line (unless you're in an C), C<$coderef> will still have a reference to the I anonymous subroutine.) Anonymous subroutines act as closures with respect to my() variables, that is, variables visible lexically within the current scope. Closure is a notion out of the Lisp world that says if you define an anonymous function in a particular lexical context, it pretends to run in that context even when it's called outside of the context. In human terms, it's a funny way of passing arguments to a subroutine when you define it as well as when you call it. It's useful for setting up little bits of code to run later, such as callbacks. You can even do object-oriented stuff with it, though Perl provides a different mechanism to do that already--see L. You can also think of closure as a way to write a subroutine template without using eval. (In fact, in version 5.000, eval was the I way to get closures. You may wish to use "require 5.001" if you use closures.) Here's a small example of how closures works: sub newprint { my $x = shift; return sub { my $y = shift; print "$x, $y!\n"; }; } $h = newprint("Howdy"); $g = newprint("Greetings"); # Time passes... &$h("world"); &$g("earthlings"); This prints Howdy, world! Greetings, earthlings! Note particularly that $x continues to refer to the value passed into newprint() I the fact that the "my $x" has seemingly gone out of scope by the time the anonymous subroutine runs. That's what closure is all about. This applies to only lexical variables, by the way. Dynamic variables continue to work as they have always worked. Closure is not something that most Perl programmers need trouble themselves about to begin with. =item 5. References are often returned by special subroutines called constructors. Perl objects are just references to a special kind of object that happens to know which package it's associated with. Constructors are just special subroutines that know how to create that association. They do so by starting with an ordinary reference, and it remains an ordinary reference even while it's also being an object. Constructors are customarily named new(), but don't have to be: $objref = new Doggie (Tail => 'short', Ears => 'long'); =item 6. References of the appropriate type can spring into existence if you dereference them in a context that assumes they exist. Because we haven't talked about dereferencing yet, we can't show you any examples yet. =item 7. A reference can be created by using a special syntax, lovingly known as the *foo{THING} syntax. *foo{THING} returns a reference to the THING slot in *foo (which is the symbol table entry which holds everything known as foo). $scalarref = *foo{SCALAR}; $arrayref = *ARGV{ARRAY}; $hashref = *ENV{HASH}; $coderef = *handler{CODE}; $ioref = *STDIN{IO}; $globref = *foo{GLOB}; All of these are self-explanatory except for *foo{IO}. It returns the IO handle, used for file handles (L), sockets (L and L), and directory handles (L). For compatibility with previous versions of Perl, *foo{FILEHANDLE} is a synonym for *foo{IO}. *foo{THING} returns undef if that particular THING hasn't been used yet, except in the case of scalars. *foo{SCALAR} returns a reference to an anonymous scalar if $foo hasn't been used yet. This might change in a future release. The use of *foo{IO} is the best way to pass bareword filehandles into or out of subroutines, or to store them in larger data structures. splutter(*STDOUT{IO}); sub splutter { my $fh = shift; print $fh "her um well a hmmm\n"; } $rec = get_rec(*STDIN{IO}); sub get_rec { my $fh = shift; return scalar <$fh>; } Beware, though, that you can't do this with a routine which is going to open the filehandle for you, because *HANDLE{IO} will be undef if HANDLE hasn't been used yet. Use \*HANDLE for that sort of thing instead. Using \*HANDLE (or *HANDLE) is another way to use and store non-bareword filehandles (before perl version 5.002 it was the only way). The two methods are largely interchangeable, you can do splutter(\*STDOUT); $rec = get_rec(\*STDIN); with the above subroutine definitions. =back That's it for creating references. By now you're probably dying to know how to use references to get back to your long-lost data. There are several basic methods. =over 4 =item 1. Anywhere you'd put an identifier (or chain of identifiers) as part of a variable or subroutine name, you can replace the identifier with a simple scalar variable containing a reference of the correct type: $bar = $$scalarref; push(@$arrayref, $filename); $$arrayref[0] = "January"; $$hashref{"KEY"} = "VALUE"; &$coderef(1,2,3); print $globref "output\n"; It's important to understand that we are specifically I dereferencing C<$arrayref[0]> or C<$hashref{"KEY"}> there. The dereference of the scalar variable happens I it does any key lookups. Anything more complicated than a simple scalar variable must use methods 2 or 3 below. However, a "simple scalar" includes an identifier that itself uses method 1 recursively. Therefore, the following prints "howdy". $refrefref = \\\"howdy"; print $$$$refrefref; =item 2. Anywhere you'd put an identifier (or chain of identifiers) as part of a variable or subroutine name, you can replace the identifier with a BLOCK returning a reference of the correct type. In other words, the previous examples could be written like this: $bar = ${$scalarref}; push(@{$arrayref}, $filename); ${$arrayref}[0] = "January"; ${$hashref}{"KEY"} = "VALUE"; &{$coderef}(1,2,3); $globref->print("output\n"); # iff IO::Handle is loaded Admittedly, it's a little silly to use the curlies in this case, but the BLOCK can contain any arbitrary expression, in particular, subscripted expressions: &{ $dispatch{$index} }(1,2,3); # call correct routine Because of being able to omit the curlies for the simple case of C<$$x>, people often make the mistake of viewing the dereferencing symbols as proper operators, and wonder about their precedence. If they were, though, you could use parentheses instead of braces. That's not the case. Consider the difference below; case 0 is a short-hand version of case 1, I case 2: $$hashref{"KEY"} = "VALUE"; # CASE 0 ${$hashref}{"KEY"} = "VALUE"; # CASE 1 ${$hashref{"KEY"}} = "VALUE"; # CASE 2 ${$hashref->{"KEY"}} = "VALUE"; # CASE 3 Case 2 is also deceptive in that you're accessing a variable called %hashref, not dereferencing through $hashref to the hash it's presumably referencing. That would be case 3. =item 3. The case of individual array elements arises often enough that it gets cumbersome to use method 2. As a form of syntactic sugar, the two lines like that above can be written: $arrayref->[0] = "January"; $hashref->{"KEY"} = "VALUE"; The left side of the array can be any expression returning a reference, including a previous dereference. Note that C<$array[$x]> is I the same thing as C<$array-E[$x]> here: $array[$x]->{"foo"}->[0] = "January"; This is one of the cases we mentioned earlier in which references could spring into existence when in an lvalue context. Before this statement, C<$array[$x]> may have been undefined. If so, it's automatically defined with a hash reference so that we can look up C<{"foo"}> in it. Likewise C<$array[$x]-E{"foo"}> will automatically get defined with an array reference so that we can look up C<[0]> in it. One more thing here. The arrow is optional I brackets subscripts, so you can shrink the above down to $array[$x]{"foo"}[0] = "January"; Which, in the degenerate case of using only ordinary arrays, gives you multidimensional arrays just like C's: $score[$x][$y][$z] += 42; Well, okay, not entirely like C's arrays, actually. C doesn't know how to grow its arrays on demand. Perl does. =item 4. If a reference happens to be a reference to an object, then there are probably methods to access the things referred to, and you should probably stick to those methods unless you're in the class package that defines the object's methods. In other words, be nice, and don't violate the object's encapsulation without a very good reason. Perl does not enforce encapsulation. We are not totalitarians here. We do expect some basic civility though. =back The ref() operator may be used to determine what type of thing the reference is pointing to. See L. The bless() operator may be used to associate a reference with a package functioning as an object class. See L. A typeglob may be dereferenced the same way a reference can, because the dereference syntax always indicates the kind of reference desired. So C<${*foo}> and C<${\$foo}> both indicate the same scalar variable. Here's a trick for interpolating a subroutine call into a string: print "My sub returned @{[mysub(1,2,3)]} that time.\n"; The way it works is that when the C<@{...}> is seen in the double-quoted string, it's evaluated as a block. The block creates a reference to an anonymous array containing the results of the call to C. So the whole block returns a reference to an array, which is then dereferenced by C<@{...}> and stuck into the double-quoted string. This chicanery is also useful for arbitrary expressions: print "That yields @{[$n + 5]} widgets\n"; =head2 Symbolic references We said that references spring into existence as necessary if they are undefined, but we didn't say what happens if a value used as a reference is already defined, but I a hard reference. If you use it as a reference in this case, it'll be treated as a symbolic reference. That is, the value of the scalar is taken to be the I of a variable, rather than a direct link to a (possibly) anonymous value. People frequently expect it to work like this. So it does. $name = "foo"; $$name = 1; # Sets $foo ${$name} = 2; # Sets $foo ${$name x 2} = 3; # Sets $foofoo $name->[0] = 4; # Sets $foo[0] @$name = (); # Clears @foo &$name(); # Calls &foo() (as in Perl 4) $pack = "THAT"; ${"${pack}::$name"} = 5; # Sets $THAT::foo without eval This is very powerful, and slightly dangerous, in that it's possible to intend (with the utmost sincerity) to use a hard reference, and accidentally use a symbolic reference instead. To protect against that, you can say use strict 'refs'; and then only hard references will be allowed for the rest of the enclosing block. An inner block may countermand that with no strict 'refs'; Only package variables are visible to symbolic references. Lexical variables (declared with my()) aren't in a symbol table, and thus are invisible to this mechanism. For example: local($value) = 10; $ref = \$value; { my $value = 20; print $$ref; } This will still print 10, not 20. Remember that local() affects package variables, which are all "global" to the package. =head2 Not-so-symbolic references A new feature contributing to readability in perl version 5.001 is that the brackets around a symbolic reference behave more like quotes, just as they always have within a string. That is, $push = "pop on "; print "${push}over"; has always meant to print "pop on over", despite the fact that push is a reserved word. This has been generalized to work the same outside of quotes, so that print ${push} . "over"; and even print ${ push } . "over"; will have the same effect. (This would have been a syntax error in Perl 5.000, though Perl 4 allowed it in the spaceless form.) Note that this construct is I considered to be a symbolic reference when you're using strict refs: use strict 'refs'; ${ bareword }; # Okay, means $bareword. ${ "bareword" }; # Error, symbolic reference. Similarly, because of all the subscripting that is done using single words, we've applied the same rule to any bareword that is used for subscripting a hash. So now, instead of writing $array{ "aaa" }{ "bbb" }{ "ccc" } you can write just $array{ aaa }{ bbb }{ ccc } and not worry about whether the subscripts are reserved words. In the rare event that you do wish to do something like $array{ shift } you can force interpretation as a reserved word by adding anything that makes it more than a bareword: $array{ shift() } $array{ +shift } $array{ shift @_ } The B<-w> switch will warn you if it interprets a reserved word as a string. But it will no longer warn you about using lowercase words, because the string is effectively quoted. =head1 WARNING You may not (usefully) use a reference as the key to a hash. It will be converted into a string: $x{ \$a } = $a; If you try to dereference the key, it won't do a hard dereference, and you won't accomplish what you're attempting. You might want to do something more like $r = \@a; $x{ $r } = $r; And then at least you can use the values(), which will be real refs, instead of the keys(), which won't. =head1 SEE ALSO Besides the obvious documents, source code can be instructive. Some rather pathological examples of the use of references can be found in the F regression test in the Perl source directory. See also L and L for how to use references to create complex data structures, and L for how to use them to create objects.