2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # Borland C++ 5.02 or better
6 # Mingw32 with gcc-2.95.2 or better
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual Studio 98)
101 # Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
105 # Borland 5.02 or later
107 # MinGW with gcc-2.95.2 or later
111 # uncomment this if your Borland compiler is older than v5.4.
114 # uncomment this if you want to use Borland's VCL as your CRT
118 # uncomment this if you are compiling under Windows 95/98 and command.com
119 # (not needed if you're running under 4DOS/NT 6.01 or later)
123 # uncomment next line if you want debug version of perl (big,slow)
124 # If not enabled, we automatically try to use maximum optimization
125 # with all compilers that are known to have a working optimizer.
130 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
131 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
132 # This currently requires VC 5.0 with Service Pack 3 or later.
133 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
134 # and follow the directions in the package to install.
136 # Not recommended if you have VC 6.x and you're not running Windows 9x.
138 #USE_PERLCRT *= define
141 # uncomment to enable linking with setargv.obj under the Visual C
142 # compiler. Setting this options enables perl to expand wildcards in
143 # arguments, but it may be harder to use alternate methods like
144 # File::DosGlob that are more powerful. This option is supported only with
147 #USE_SETARGV *= define
150 # if you want to have the crypt() builtin function implemented, leave this or
151 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
152 # version of des_fcrypt().
154 CRYPT_SRC *= fcrypt.c
157 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
158 # library, uncomment this, and make sure the library exists (see README.win32)
159 # Specify the full pathname of the library.
161 #CRYPT_LIB *= fcrypt.lib
164 # set this if you wish to use perl's malloc
165 # WARNING: Turning this on/off WILL break binary compatibility with extensions
166 # you may have compiled with/without it. Be prepared to recompile all
167 # extensions if you change the default. Currently, this cannot be enabled
168 # if you ask for USE_IMP_SYS above.
170 #PERL_MALLOC *= define
173 # set this to enable debugging mstats
174 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
175 # be enabled without PERL_MALLOC as well.
177 #DEBUG_MSTATS *= define
180 # set the install locations of the compiler include/libraries
181 # Running VCVARS32.BAT is *required* when using Visual C.
182 # Some versions of Visual C don't define MSVCDIR in the environment,
183 # so you may have to set CCHOME explicitly (spaces in the path name should
186 .IF "$(CCTYPE)" == "BORLAND"
187 CCHOME *= C:\Borland\BCC55
188 .ELIF "$(CCTYPE)" == "GCC"
193 CCINCDIR *= $(CCHOME)\include
194 CCLIBDIR *= $(CCHOME)\lib
197 # Additional compiler flags can be specified here.
199 BUILDOPT *= $(BUILDOPTEXTRA)
202 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
203 # internal hash function unless the PERL_HASH_SEED environment variable is set.
204 # Alternatively, adding -DNO_HASH_SEED will completely disable the
205 # randomization feature.
206 # The latter is required to maintain binary compatibility with Perl 5.8.0.
208 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
209 #BUILDOPT += -DNO_HASH_SEED
212 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
213 # for old symbols by default, at the expense of extreme pollution. You most
214 # probably just want to build modules that won't compile with
215 # perl Makefile.PL POLLUTE=1
216 # instead of enabling this. Please report such modules to the respective
219 #BUILDOPT += -DPERL_POLLUTE
222 # This should normally be disabled. Enabling it will disable the File::Glob
223 # implementation of CORE::glob.
225 #BUILDOPT += -DPERL_EXTERNAL_GLOB
228 # This should normally be disabled. Enabling it causes perl to read scripts
229 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
231 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
234 # specify semicolon-separated list of extra directories that modules will
235 # look for libraries (spaces in path names need not be quoted)
240 # set this to point to cmd.exe (only needed if you use some
241 # alternate shell that doesn't grok cmd.exe style commands)
243 #SHELL *= g:\winnt\system32\cmd.exe
246 # set this to your email address (perl will guess a value from
247 # from your loginname and your hostname, which may not be right)
252 ## Build configuration ends.
255 ##################### CHANGE THESE ONLY IF YOU MUST #####################
257 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
261 CRYPT_FLAG = -DHAVE_DES_FCRYPT
265 DEBUG_MSTATS *= undef
267 USE_SITECUST *= undef
269 USE_ITHREADS *= undef
272 USE_LARGE_FILES *= undef
275 .IF "$(USE_IMP_SYS)" == "define"
279 .IF "$(PERL_MALLOC)" == "undef"
283 .IF "$(DEBUG_MSTATS)" == "define"
284 BUILDOPT += -DPERL_DEBUGGING_MSTATS
287 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
291 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
295 .IF "$(USE_SITECUST)" == "define"
296 BUILDOPT += -DUSE_SITECUSTOMIZE
299 .IF "$(USE_MULTI)" != "undef"
300 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
303 .IF "$(USE_IMP_SYS)" != "undef"
304 BUILDOPT += -DPERL_IMPLICIT_SYS
307 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
309 PROCESSOR_ARCHITECTURE *= x86
312 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
313 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
315 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
322 .IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64"
323 PROCESSOR_ARCHITECTURE = x86_64
325 .IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
326 PROCESSOR_ARCHITECTURE = ia64
329 .IF "$(USE_MULTI)" == "define"
330 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
332 .IF "$(USE_PERLIO)" == "define"
333 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
335 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
337 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
340 .IF "$(USE_ITHREADS)" == "define"
341 ARCHNAME !:= $(ARCHNAME)-thread
344 # Visual Studio 98 and .NET 2003 specific
345 # VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
346 # about 10% less time. (The free version of 7.x can't do this, however.)
347 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70"
348 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
351 ARCHDIR = ..\lib\$(ARCHNAME)
352 COREDIR = ..\lib\CORE
353 AUTODIR = ..\lib\auto
357 EXTUTILSDIR = $(LIBDIR)\ExtUtils
361 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
362 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
363 INST_LIB = $(INST_TOP)$(INST_VER)\lib
364 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
365 INST_COREDIR = $(INST_ARCHLIB)\CORE
366 INST_HTML = $(INST_TOP)$(INST_VER)\html
369 # Programs to compile, build .lib files and link
374 .IF "$(CCTYPE)" == "BORLAND"
377 .IF "$(BCCOLD)" != "define"
389 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
390 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
391 DEFINES = -DWIN32 $(CRYPT_FLAG)
392 LOCDEFS = -DPERLDLL -DPERL_CORE
398 # same libs as MSVC, except Borland doesn't have oldnames.lib
399 LIBFILES = $(CRYPT_LIB) \
400 kernel32.lib user32.lib gdi32.lib winspool.lib \
401 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
402 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
403 version.lib odbc32.lib odbccp32.lib \
406 .IF "$(CFG)" == "Debug"
407 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
410 OPTIMIZE = -O2 -D_RTLDLL
415 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
416 $(PCHFLAGS) $(OPTIMIZE)
417 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
422 .IF "$(BCCOLD)" != "define"
424 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
426 .IF "$(BCCVCL)" == "define"
427 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
428 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
432 .ELIF "$(CCTYPE)" == "GCC"
448 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
449 DEFINES = -DWIN32 $(CRYPT_FLAG)
450 LOCDEFS = -DPERLDLL -DPERL_CORE
457 LIBFILES = $(CRYPT_LIB) $(LIBC) \
458 -lmoldname -lkernel32 -luser32 -lgdi32 \
459 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
460 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
461 -lwinmm -lversion -lodbc32 -lodbccp32
463 .IF "$(CFG)" == "Debug"
464 OPTIMIZE = -g -O2 -DDEBUGGING
472 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
473 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
478 # NOTE: we assume that GCC uses MSVCRT.DLL
479 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
485 LIB32 = $(LINK32) -lib
492 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
493 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
494 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
495 LOCDEFS = -DPERLDLL -DPERL_CORE
499 .IF "$(USE_PERLCRT)" != "define"
505 .IF "$(CFG)" == "Debug"
506 .IF "$(CCTYPE)" == "MSVC20"
507 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
509 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
513 OPTIMIZE = -MD -Zi -DNDEBUG
514 # we enable debug symbols in release builds also
515 LINK_DBG = -debug -opt:ref,icf
516 # you may want to enable this if you want COFF symbols in the executables
517 # in addition to the PDB symbols. The default Dr. Watson that ships with
518 # Windows can use the the former but not latter. The free WinDbg can be
519 # installed to get better stack traces from just the PDB symbols, so we
520 # avoid the bloat of COFF symbols by default.
521 #LINK_DBG = $(LINK_DBG) -debugtype:both
522 .IF "$(WIN64)" == "define"
523 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
527 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
533 .IF "$(WIN64)" == "define"
534 DEFINES += -DWIN64 -DCONSERVATIVE
535 OPTIMIZE += -Wp64 -fp:precise
538 .IF "$(USE_PERLCRT)" != "define"
539 BUILDOPT += -DPERL_MSVCRT_READFIX
542 LIBBASEFILES = $(CRYPT_LIB) \
543 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
544 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
545 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
546 version.lib odbc32.lib odbccp32.lib
548 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
549 # include the buffer overrun verification code used by the /GS switch.
550 # Since the code links against libraries that are compiled with /GS, this
551 # "security cookie verification" must be included via bufferoverlow.lib.
552 .IF "$(WIN64)" == "define"
553 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
556 # we add LIBC here, since we may be using PerlCRT.dll
557 LIBFILES = $(LIBBASEFILES) $(LIBC)
559 EXTRACFLAGS = -nologo -GF -W3
560 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
561 $(PCHFLAGS) $(OPTIMIZE)
562 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
563 -libpath:"$(INST_COREDIR)" \
564 -machine:$(PROCESSOR_ARCHITECTURE)
571 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
573 # used to allow local linking flags that are not propogated into Config.pm,
577 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
579 #################### do not edit below this line #######################
580 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
582 # Some dmake's built with Borland C++, including Sarathy's one at:
583 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
584 # require backslashes to be doubled-up when written to $(mktmp) files.
585 # Other dmake's do not require this and would actually output a double
586 # backslash if they were doubled-up.
587 .IF "$(shell @type $(mktmp \\))"=="\\"
593 # There is a related issue with other escape sequences: Sarathy's old
594 # dmake automatically maps escape sequences like \n to their ASCII values
595 # when used in macros, while other dmake's only do so if this behaviour
596 # is explicitly requested with the :m modifier.
598 .IF "$(shell @type $(mktmp \n))"=="\n"
614 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
617 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
620 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
626 .IF "$(CCTYPE)" == "BORLAND"
627 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
628 $(IMPLIB) $(*B).lib $@
629 .ELIF "$(CCTYPE)" == "GCC"
630 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
631 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
633 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
634 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
638 .IF "$(CCTYPE)" == "GCC"
639 $(RSC) --use-temp-file -i $< -o $@
646 MINIPERL = ..\miniperl.exe
648 PERLEXE = ..\perl.exe
649 WPERLEXE = ..\wperl.exe
650 GLOBEXE = ..\perlglob.exe
651 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
652 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
655 # Unicode data files generated by mktables
656 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
657 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
658 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
659 ..\lib\unicore\PVA.pl
661 # Directories of Unicode data files generated by mktables
662 UNIDATADIR1 = ..\lib\unicore\To
663 UNIDATADIR2 = ..\lib\unicore\lib
665 PERLEXE_ICO = .\perlexe.ico
666 PERLEXE_RES = .\perlexe.res
669 # Nominate a target which causes extensions to be re-built
670 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
671 # on and really only the interface - i.e. the .def file used to export symbols
673 PERLDEP = perldll.def
676 PL2BAT = bin\pl2bat.pl
677 GLOBBAT = bin\perlglob.bat
694 ..\utils\config_data \
720 .IF "$(CCTYPE)" == "BORLAND"
722 CFGSH_TMPL = config.bc
723 CFGH_TMPL = config_H.bc
725 .ELIF "$(CCTYPE)" == "GCC"
727 CFGSH_TMPL = config.gc
728 CFGH_TMPL = config_H.gc
729 PERLIMPLIB = ..\libperl59$(a)
733 .IF "$(WIN64)" == "define"
734 CFGSH_TMPL = config.vc64
735 CFGH_TMPL = config_H.vc64
737 CFGSH_TMPL = config.vc
738 CFGH_TMPL = config_H.vc
743 # makedef.pl must be updated if this changes, and this should normally
744 # only change when there is an incompatible revision of the public API.
745 PERLIMPLIB *= ..\perl59$(a)
746 PERLDLL = ..\perl59.dll
748 XCOPY = xcopy /f /r /i /d /y
749 RCOPY = xcopy /f /r /i /e /d /y
753 # filenames given to xsubpp must have forward slashes (since it puts
754 # full pathnames in #line strings)
755 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
795 EXTRACORE_SRC += perllib.c
797 .IF "$(PERL_MALLOC)" == "define"
798 EXTRACORE_SRC += ..\malloc.c
801 EXTRACORE_SRC += ..\perlio.c
808 # We need this for miniperl build unless we override canned
809 # config.h #define building mini\*
810 #.IF "$(USE_PERLIO)" == "define"
811 WIN32_SRC += .\win32io.c
814 .IF "$(CRYPT_SRC)" != ""
815 WIN32_SRC += .\$(CRYPT_SRC)
818 DLL_SRC = $(DYNALOADER).c
865 .\include\sys\socket.h \
868 CORE_H = $(CORE_NOCFG_H) .\config.h
870 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
871 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
872 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
873 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
874 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
875 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
876 DLL_OBJ = $(DLL_SRC:db:+$(o))
877 X2P_OBJ = $(X2P_SRC:db:+$(o))
879 PERLDLL_OBJ = $(CORE_OBJ)
880 PERLEXE_OBJ = perlmain$(o)
882 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
884 .IF "$(USE_SETARGV)" != ""
885 SETARGV_OBJ = setargv$(o)
888 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
889 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
890 Sys/Hostname Storable Filter/Util/Call Encode \
891 Digest/MD5 Digest/SHA PerlIO/scalar MIME/Base64 Time/HiRes \
892 Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32
896 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
898 # vars must be separated by "\t+~\t+", since we're using the tempfile
899 # version of config_sh.pl (we were overflowing someone's buffer by
900 # trying to fit them all on the command line)
903 INST_DRV=$(INST_DRV) ~ \
904 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
905 INST_VER=$(INST_VER:s,\,$B,) ~ \
906 INST_ARCH=$(INST_ARCH) ~ \
907 archname=$(ARCHNAME) ~ \
910 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
911 cf_email=$(EMAIL) ~ \
912 d_crypt=$(D_CRYPT) ~ \
913 d_mymalloc=$(PERL_MALLOC) ~ \
914 libs=$(LIBFILES:f) ~ \
915 incpath=$(CCINCDIR:s,\,$B,) ~ \
916 libperl=$(PERLIMPLIB:f) ~ \
917 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
924 static_ext=$(STATIC_EXT) ~ \
925 usethreads=$(USE_ITHREADS) ~ \
926 useithreads=$(USE_ITHREADS) ~ \
927 usemultiplicity=$(USE_MULTI) ~ \
928 useperlio=$(USE_PERLIO) ~ \
929 uselargefiles=$(USE_LARGE_FILES) ~ \
930 usesitecustomize=$(USE_SITECUST) ~ \
931 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
935 # set up targets varying between Win95 and WinNT builds
938 .IF "$(IS_WIN95)" == "define"
940 RIGHTMAKE = __switch_makefiles
946 .IMPORT .IGNORE : SystemRoot windir
948 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
949 ENV_OS=$(subst,OS=, $(shell @set OS))
951 .IF "$(ENV_OS)" == "Windows_NT"
952 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
954 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
961 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
962 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
965 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
967 #----------------------------------------------------------------
969 #-------------------- BEGIN Win95 SPECIFIC ----------------------
971 # this target is a jump-off point for Win95
972 # 1. it switches to the Win95-specific makefile if it exists
973 # (__do_switch_makefiles)
974 # 2. it prints a message when the Win95-specific one finishes (__done)
975 # 3. it then kills this makefile by trying to make __no_such_target
977 __switch_makefiles: __do_switch_makefiles __done __no_such_target
979 __do_switch_makefiles:
980 .IF "$(NOTFIRST)" != "true"
981 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
986 .IF "$(NOTFIRST)" != "true"
988 @echo Build process complete. Ignore any errors after this message.
989 @echo Run "dmake test" to test and "dmake install" to install
992 # dummy targets for Win95-specific makefile
1002 # This target is used to generate the new makefile (.\makefile.95) for Win95
1004 .\makefile.95: .\makefile.mk
1005 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1007 #--------------------- END Win95 SPECIFIC ---------------------
1009 # a blank target for when builds don't need to do certain things
1010 # this target added for Win95 port but used to keep the WinNT port able to
1015 $(GLOBEXE) : perlglob$(o)
1016 .IF "$(CCTYPE)" == "BORLAND"
1017 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1018 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1019 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1020 .ELIF "$(CCTYPE)" == "GCC"
1021 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1023 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1024 perlglob$(o) setargv$(o)
1027 perlglob$(o) : perlglob.c
1029 config.w32 : $(CFGSH_TMPL)
1030 copy $(CFGSH_TMPL) config.w32
1032 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1034 copy $(CFGH_TMPL) config.h
1036 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1037 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1038 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1040 # this target is for when changes to the main config.sh happen
1041 # edit config.{b,v,g}c and make this target once for each supported
1042 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1044 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1045 $(CFGSH_TMPL) > ..\config.sh
1046 -cd .. && del /f perl.exe
1047 -cd .. && del /f perl*.dll
1048 cd .. && perl configpm
1049 -del /f $(CFGH_TMPL)
1051 -perl config_h.PL "INST_VER=$(INST_VER)"
1052 rename config.h $(CFGH_TMPL)
1054 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1055 cd .. && miniperl configpm
1056 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1057 $(XCOPY) ..\*.h $(COREDIR)\*.*
1058 $(XCOPY) *.h $(COREDIR)\*.*
1059 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1060 $(RCOPY) include $(COREDIR)\*.*
1061 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1062 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1064 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1065 .IF "$(CCTYPE)" == "BORLAND"
1066 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1067 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1068 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1069 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1070 .ELIF "$(CCTYPE)" == "GCC"
1071 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1072 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1074 $(LINK32) -subsystem:console -out:$@ \
1075 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1079 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1081 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1082 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1084 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1085 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1087 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1088 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1089 # unless the .IF is true), so instead we use a .ELSE with the default.
1090 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1092 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1093 .IF "$(USE_IMP_SYS)" == "define"
1094 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1096 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1099 # 1. we don't want to rebuild miniperl.exe when config.h changes
1100 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1101 $(MINI_OBJ) : $(CORE_NOCFG_H)
1103 $(WIN32_OBJ) : $(CORE_H)
1105 $(CORE_OBJ) : $(CORE_H)
1107 $(DLL_OBJ) : $(CORE_H)
1109 $(X2P_OBJ) : $(CORE_H)
1111 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1112 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1113 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1114 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1116 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1117 .IF "$(CCTYPE)" == "BORLAND"
1118 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1119 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
1121 $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
1124 .ELIF "$(CCTYPE)" == "GCC"
1125 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1126 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1127 $(subst,\,$B $(shell @type Extensions_static)) \
1128 $(LIBFILES) $(LKPOST))
1129 dlltool --output-lib $(PERLIMPLIB) \
1130 --dllname $(PERLDLL:b).dll \
1132 --base-file perl.base \
1133 --output-exp perl.exp
1134 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1135 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1136 $(subst,\,$B $(shell @type Extensions_static)) \
1137 $(LIBFILES) perl.exp $(LKPOST))
1139 $(LINK32) -dll -def:perldll.def -out:$@ \
1140 @Extensions_static \
1141 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1142 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
1144 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1147 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1148 $(MINIPERL) makeico.pl > $@
1150 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1152 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1153 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1155 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1156 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1158 ..\x2p\hash$(o) : ..\x2p\hash.c
1159 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1161 ..\x2p\str$(o) : ..\x2p\str.c
1162 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1164 ..\x2p\util$(o) : ..\x2p\util.c
1165 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1167 ..\x2p\walk$(o) : ..\x2p\walk.c
1168 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1170 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1171 $(MINIPERL) ..\x2p\find2perl.PL
1172 $(MINIPERL) ..\x2p\s2p.PL
1173 .IF "$(CCTYPE)" == "BORLAND"
1174 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1175 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1176 .ELIF "$(CCTYPE)" == "GCC"
1177 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1178 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1180 $(LINK32) -subsystem:console -out:$@ \
1181 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1184 perlmain.c : runperl.c
1185 copy runperl.c perlmain.c
1187 perlmain$(o) : perlmain.c
1188 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1190 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1191 .IF "$(CCTYPE)" == "BORLAND"
1192 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1193 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
1195 $(PERLIMPLIB) $(LIBFILES)$N)
1196 .ELIF "$(CCTYPE)" == "GCC"
1197 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1198 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1200 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1201 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1203 copy $(PERLEXE) $(WPERLEXE)
1204 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1205 copy splittree.pl ..
1206 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1208 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1209 if not exist $(AUTODIR) mkdir $(AUTODIR)
1210 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1211 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1212 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1213 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1214 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1215 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1217 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1218 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1220 #-------------------------------------------------------------------------------
1221 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1222 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1223 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1225 Extensions_static : buildext.pl
1226 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1227 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1228 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1231 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1232 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1234 Extensions_realclean :
1235 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1236 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1238 #-------------------------------------------------------------------------------
1242 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1243 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1244 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1246 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1247 # so please check that script before making structural changes here
1248 utils: $(PERLEXE) $(X2P)
1249 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1250 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1251 copy ..\README.aix ..\pod\perlaix.pod
1252 copy ..\README.amiga ..\pod\perlamiga.pod
1253 copy ..\README.apollo ..\pod\perlapollo.pod
1254 copy ..\README.beos ..\pod\perlbeos.pod
1255 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1256 copy ..\README.ce ..\pod\perlce.pod
1257 copy ..\README.cn ..\pod\perlcn.pod
1258 copy ..\README.cygwin ..\pod\perlcygwin.pod
1259 copy ..\README.dgux ..\pod\perldgux.pod
1260 copy ..\README.dos ..\pod\perldos.pod
1261 copy ..\README.epoc ..\pod\perlepoc.pod
1262 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1263 copy ..\README.hpux ..\pod\perlhpux.pod
1264 copy ..\README.hurd ..\pod\perlhurd.pod
1265 copy ..\README.irix ..\pod\perlirix.pod
1266 copy ..\README.jp ..\pod\perljp.pod
1267 copy ..\README.ko ..\pod\perlko.pod
1268 copy ..\README.linux ..\pod\perllinux.pod
1269 copy ..\README.machten ..\pod\perlmachten.pod
1270 copy ..\README.macos ..\pod\perlmacos.pod
1271 copy ..\README.macosx ..\pod\perlmacosx.pod
1272 copy ..\README.mint ..\pod\perlmint.pod
1273 copy ..\README.mpeix ..\pod\perlmpeix.pod
1274 copy ..\README.netware ..\pod\perlnetware.pod
1275 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1276 copy ..\README.os2 ..\pod\perlos2.pod
1277 copy ..\README.os390 ..\pod\perlos390.pod
1278 copy ..\README.os400 ..\pod\perlos400.pod
1279 copy ..\README.plan9 ..\pod\perlplan9.pod
1280 copy ..\README.qnx ..\pod\perlqnx.pod
1281 copy ..\README.solaris ..\pod\perlsolaris.pod
1282 copy ..\README.symbian ..\pod\perlsymbian.pod
1283 copy ..\README.tru64 ..\pod\perltru64.pod
1284 copy ..\README.tw ..\pod\perltw.pod
1285 copy ..\README.uts ..\pod\perluts.pod
1286 copy ..\README.vmesa ..\pod\perlvmesa.pod
1287 copy ..\README.vms ..\pod\perlvms.pod
1288 copy ..\README.vos ..\pod\perlvos.pod
1289 copy ..\README.win32 ..\pod\perlwin32.pod
1290 copy ..\pod\perl594delta.pod ..\pod\perldelta.pod
1291 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1292 cd ..\lib && $(PERLEXE) lib_pm.PL
1293 $(PERLEXE) $(PL2BAT) $(UTILS)
1295 # Note that the pod cleanup in this next section is parsed (and regenerated
1296 # by pod/buildtoc so please check that script before making changes here
1298 distclean: realclean
1299 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1300 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1302 -del /f $(DYNALOADER).c
1303 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1304 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1305 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1306 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1307 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1308 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1309 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1310 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1311 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1312 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1313 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1314 -del /f $(LIBDIR)\ByteLoader.pm
1315 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1316 -del /f $(LIBDIR)\Devel\PPPort.pm
1317 -del /f $(LIBDIR)\File\Glob.pm
1318 -del /f $(LIBDIR)\Storable.pm
1319 -del /f $(LIBDIR)\Digest\MD5.pm
1320 -del /f $(LIBDIR)\Digest\SHA.pm
1321 -del /f $(LIBDIR)\PerlIO\encoding.pm
1322 -del /f $(LIBDIR)\PerlIO\scalar.pm
1323 -del /f $(LIBDIR)\PerlIO\via.pm
1324 -del /f $(LIBDIR)\Sys\Hostname.pm
1325 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1326 -del /f $(LIBDIR)\threads\shared.pm
1327 -del /f $(LIBDIR)\Time\HiRes.pm
1328 -del /f $(LIBDIR)\Unicode\Normalize.pm
1329 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1330 -del /f $(LIBDIR)\Win32.pm
1331 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1332 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1333 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1334 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1335 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1336 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1337 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1338 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1339 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1340 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1341 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1342 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1343 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1344 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1345 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1346 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1347 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1348 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1349 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1350 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1351 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1352 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1353 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1354 perlos400.pod perlplan9.pod perlqnx.pod perlsolaris.pod \
1355 perlsymbian.pod perltru64.pod perltw.pod perluts.pod \
1356 perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod perlwin32.pod \
1357 pod2html pod2latex pod2man pod2text pod2usage \
1358 podchecker podselect
1359 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1360 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1361 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1362 -cd ..\x2p && del /f find2perl s2p psed *.bat
1363 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1367 -del /f $(PERLEXE_ICO) perl.base
1368 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1369 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1370 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1371 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1372 -if exist pod2htmd.tmp del pod2htmd.tmp
1373 -if exist pod2htmi.tmp del pod2htmi.tmp
1374 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1376 install : all installbare installhtml
1378 installbare : $(RIGHTMAKE) utils
1379 $(PERLEXE) ..\installperl
1380 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1381 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1382 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1383 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1384 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1387 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1389 inst_lib : $(CONFIGPM)
1390 copy splittree.pl ..
1391 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1392 $(RCOPY) ..\lib $(INST_LIB)\*.*
1394 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1395 cd ..\lib\unicore && \
1396 ..\$(MINIPERL) -I.. mktables
1398 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1399 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1400 if exist ..\t\perl.exe del /f ..\t\perl.exe
1401 rename ..\t\miniperl.exe perl.exe
1402 .IF "$(CCTYPE)" == "BORLAND"
1403 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1405 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1409 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1411 test-prep : all utils
1412 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1413 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1414 .IF "$(CCTYPE)" == "BORLAND"
1415 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1417 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1420 test : $(RIGHTMAKE) test-prep
1421 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1423 test-notty : test-prep
1424 set PERL_SKIP_TTY_TEST=1 && \
1425 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1427 _test : $(RIGHTMAKE)
1428 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1429 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1430 .IF "$(CCTYPE)" == "BORLAND"
1431 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1433 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1435 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1438 -@erase miniperlmain$(o)
1440 -@erase perlglob$(o)
1441 -@erase perlmain$(o)
1449 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1450 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1451 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1452 -@erase $(UNIDATAFILES)
1453 -@erase $(WIN32_OBJ)
1456 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1457 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1458 -@erase ..\x2p\*.exe ..\x2p\*.bat
1462 -@erase Extensions_static
1464 clean : Extensions_clean _clean
1466 realclean : Extensions_realclean _clean
1468 # Handy way to run perlbug -ok without having to install and run the
1469 # installed perlbug. We don't re-run the tests here - we trust the user.
1470 # Please *don't* use this unless all tests pass.
1471 # If you want to report test failures, use "dmake nok" instead.
1473 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1476 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1479 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1482 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok