2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # Comment this out if you don't want to enable large file support for
80 # some reason. Should normally only be changed to maintain compatibility
81 # with an older release of perl.
82 USE_LARGE_FILES *= define
85 # uncomment exactly one of the following
89 # Visual C++ > 2.x and < 6.x
93 # Borland 5.02 or later
95 # mingw32+gcc-2.95.2 or better
97 # Uncomment this if you are using the latest MinGW release (2.0.0)
99 #USE_GCC_V3_2 *= define
102 # uncomment this if your Borland compiler is older than v5.4.
105 # uncomment this if you want to use Borland's VCL as your CRT
109 # uncomment this if you are compiling under Windows 95/98 and command.com
110 # (not needed if you're running under 4DOS/NT 6.01 or later)
114 # uncomment next line if you want debug version of perl (big,slow)
115 # If not enabled, we automatically try to use maximum optimization
116 # with all compilers that are known to have a working optimizer.
121 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
122 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
123 # This currently requires VC 5.0 with Service Pack 3 or later.
124 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
125 # and follow the directions in the package to install.
127 # Not recommended if you have VC 6.x and you're not running Windows 9x.
129 #USE_PERLCRT *= define
132 # uncomment to enable linking with setargv.obj under the Visual C
133 # compiler. Setting this options enables perl to expand wildcards in
134 # arguments, but it may be harder to use alternate methods like
135 # File::DosGlob that are more powerful. This option is supported only with
138 #USE_SETARGV *= define
141 # if you want to have the crypt() builtin function implemented, leave this or
142 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
143 # version of des_fcrypt().
145 CRYPT_SRC *= fcrypt.c
148 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
149 # library, uncomment this, and make sure the library exists (see README.win32)
150 # Specify the full pathname of the library.
152 #CRYPT_LIB *= fcrypt.lib
155 # set this if you wish to use perl's malloc
156 # WARNING: Turning this on/off WILL break binary compatibility with extensions
157 # you may have compiled with/without it. Be prepared to recompile all
158 # extensions if you change the default. Currently, this cannot be enabled
159 # if you ask for USE_IMP_SYS above.
161 #PERL_MALLOC *= define
164 # set the install locations of the compiler include/libraries
165 # Running VCVARS32.BAT is *required* when using Visual C.
166 # Some versions of Visual C don't define MSVCDIR in the environment,
167 # so you may have to set CCHOME explicitly (spaces in the path name should
170 .IF "$(CCTYPE)" == "BORLAND"
171 CCHOME *= C:\borland\bcc55
172 .ELIF "$(CCTYPE)" == "GCC"
177 CCINCDIR *= $(CCHOME)\include
178 CCLIBDIR *= $(CCHOME)\lib
181 # Additional compiler flags can be specified here.
185 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
186 # for old symbols by default, at the expense of extreme pollution. You most
187 # probably just want to build modules that won't compile with
188 # perl Makefile.PL POLLUTE=1
189 # instead of enabling this. Please report such modules to the respective
192 #BUILDOPT += -DPERL_POLLUTE
195 # This should normally be disabled. Enabling it will disable the File::Glob
196 # implementation of CORE::glob.
198 #BUILDOPT += -DPERL_EXTERNAL_GLOB
201 # This should normally be disabled. Enabling it causes perl to read scripts
202 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
203 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
206 # specify semicolon-separated list of extra directories that modules will
207 # look for libraries (spaces in path names need not be quoted)
212 # set this to point to cmd.exe (only needed if you use some
213 # alternate shell that doesn't grok cmd.exe style commands)
215 #SHELL *= g:\winnt\system32\cmd.exe
218 # set this to your email address (perl will guess a value from
219 # from your loginname and your hostname, which may not be right)
224 ## Build configuration ends.
227 ##################### CHANGE THESE ONLY IF YOU MUST #####################
229 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
233 CRYPT_FLAG = -DHAVE_DES_FCRYPT
239 USE_ITHREADS *= undef
242 USE_LARGE_FILES *= undef
245 .IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
249 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
253 .IF "$(USE_MULTI)" != "undef"
254 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
257 .IF "$(USE_IMP_SYS)" != "undef"
258 BUILDOPT += -DPERL_IMPLICIT_SYS
261 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
263 PROCESSOR_ARCHITECTURE *= x86
266 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
267 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
269 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
276 .IF "$(USE_MULTI)" == "define"
277 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
279 .IF "$(USE_PERLIO)" == "define"
280 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
282 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
287 .IF "$(USE_ITHREADS)" == "define"
288 ARCHNAME !:= $(ARCHNAME)-thread
291 # Visual Studio 98 specific
292 .IF "$(CCTYPE)" == "MSVC60"
294 # VC 6.0 can load the socket dll on demand. Makes the test suite
295 # run in about 10% less time.
296 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
298 .IF "$(CFG)" == "Debug"
300 # VC 6.0 seems capable of compiling perl correctly with optimizations
301 # enabled. Anything earlier fails tests.
306 ARCHDIR = ..\lib\$(ARCHNAME)
307 COREDIR = ..\lib\CORE
308 AUTODIR = ..\lib\auto
312 EXTUTILSDIR = $(LIBDIR)\ExtUtils
315 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
316 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
317 INST_LIB = $(INST_TOP)$(INST_VER)\lib
318 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
319 INST_COREDIR = $(INST_ARCHLIB)\CORE
320 INST_POD = $(INST_LIB)\pod
321 INST_HTML = $(INST_TOP)$(INST_VER)\html
324 # Programs to compile, build .lib files and link
329 .IF "$(CCTYPE)" == "BORLAND"
332 .IF "$(BCCOLD)" != "define"
344 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
345 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
346 DEFINES = -DWIN32 $(CRYPT_FLAG)
347 LOCDEFS = -DPERLDLL -DPERL_CORE
352 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
354 .IF "$(CFG)" == "Debug"
355 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
358 OPTIMIZE = -O2 -D_RTLDLL
362 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
363 $(PCHFLAGS) $(OPTIMIZE)
364 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
368 .IF "$(BCCOLD)" != "define"
370 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
372 .IF "$(BCCVCL)" == "define"
373 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
374 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
378 .ELIF "$(CCTYPE)" == "GCC"
382 .IF "$(USE_GCC_V3_2)" == "define"
397 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
398 DEFINES = -DWIN32 $(CRYPT_FLAG)
399 LOCDEFS = -DPERLDLL -DPERL_CORE
406 LIBFILES = $(CRYPT_LIB) $(LIBC) \
407 -lmoldname -lkernel32 -luser32 -lgdi32 \
408 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
409 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
410 -lwinmm -lversion -lodbc32
412 .IF "$(CFG)" == "Debug"
413 OPTIMIZE = -g -O2 -DDEBUGGING
420 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
421 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
426 # NOTE: we assume that GCC uses MSVCRT.DLL
427 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
433 LIB32 = $(LINK32) -lib
440 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
441 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
442 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
443 LOCDEFS = -DPERLDLL -DPERL_CORE
447 .IF "$(USE_PERLCRT)" != "define"
456 .IF "$(CFG)" == "Debug"
457 .IF "$(CCTYPE)" == "MSVC20"
458 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
460 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
464 OPTIMIZE = -MD -DNDEBUG
466 .IF "$(WIN64)" == "define"
467 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
471 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
477 .IF "$(WIN64)" == "define"
478 DEFINES += -DWIN64 -DCONSERVATIVE
479 OPTIMIZE += -Wp64 -Op
482 .IF "$(USE_PERLCRT)" != "define"
483 BUILDOPT += -DPERL_MSVCRT_READFIX
486 LIBBASEFILES = $(CRYPT_LIB) \
487 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
488 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
489 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
492 # win64 doesn't have some libs
493 .IF "$(WIN64)" != "define"
494 LIBBASEFILES += odbc32.lib odbccp32.lib
497 # we add LIBC here, since we may be using PerlCRT.dll
498 LIBFILES = $(LIBBASEFILES) $(LIBC)
500 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
501 $(PCHFLAGS) $(OPTIMIZE)
502 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
503 -libpath:"$(INST_COREDIR)" \
504 -machine:$(PROCESSOR_ARCHITECTURE)
511 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
513 # used to allow local linking flags that are not propogated into Config.pm,
517 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
519 #################### do not edit below this line #######################
520 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
532 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
535 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
538 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
544 .IF "$(CCTYPE)" == "BORLAND"
545 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
546 $(IMPLIB) $(*B).lib $@
547 .ELIF "$(CCTYPE)" == "GCC"
548 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
549 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
551 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
552 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
560 MINIPERL = ..\miniperl.exe
562 PERLEXE = ..\perl.exe
563 WPERLEXE = ..\wperl.exe
564 GLOBEXE = ..\perlglob.exe
565 CONFIGPM = ..\lib\Config.pm
566 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
569 # Nominate a target which causes extensions to be re-built
570 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
571 # on and really only the interface - i.e. the .def file used to export symbols
573 PERLDEP = perldll.def
576 PL2BAT = bin\pl2bat.pl
577 GLOBBAT = bin\perlglob.bat
615 .IF "$(CCTYPE)" == "BORLAND"
617 CFGSH_TMPL = config.bc
618 CFGH_TMPL = config_H.bc
620 .ELIF "$(CCTYPE)" == "GCC"
622 CFGSH_TMPL = config.gc
623 CFGH_TMPL = config_H.gc
624 PERLIMPLIB = ..\libperl59$(a)
628 .IF "$(WIN64)" == "define"
629 CFGSH_TMPL = config.vc64
630 CFGH_TMPL = config_H.vc64
632 CFGSH_TMPL = config.vc
633 CFGH_TMPL = config_H.vc
638 # makedef.pl must be updated if this changes, and this should normally
639 # only change when there is an incompatible revision of the public API.
640 PERLIMPLIB *= ..\perl59$(a)
641 PERLDLL = ..\perl59.dll
643 XCOPY = xcopy /f /r /i /d
644 RCOPY = xcopy /f /r /i /e /d
648 # filenames given to xsubpp must have forward slashes (since it puts
649 # full pathnames in #line strings)
650 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
689 EXTRACORE_SRC += perllib.c
691 .IF "$(PERL_MALLOC)" == "define"
692 EXTRACORE_SRC += ..\malloc.c
695 EXTRACORE_SRC += ..\perlio.c
702 # We need this for miniperl build unless we override canned
703 # config.h #define building mini\*
704 #.IF "$(USE_PERLIO)" == "define"
705 WIN32_SRC += .\win32io.c
708 .IF "$(CRYPT_SRC)" != ""
709 WIN32_SRC += .\$(CRYPT_SRC)
712 DLL_SRC = $(DYNALOADER).c
758 .\include\sys\socket.h \
761 CORE_H = $(CORE_NOCFG_H) .\config.h
763 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
764 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
765 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
766 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
767 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
768 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
769 DLL_OBJ = $(DLL_SRC:db:+$(o))
770 X2P_OBJ = $(X2P_SRC:db:+$(o))
772 PERLDLL_OBJ = $(CORE_OBJ)
773 PERLEXE_OBJ = perlmain$(o)
775 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
777 .IF "$(USE_SETARGV)" != ""
778 SETARGV_OBJ = setargv$(o)
781 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
782 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
783 Sys/Hostname Storable Filter/Util/Call Encode \
784 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
786 STATIC_EXT = DynaLoader
789 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
791 POD2HTML = $(PODDIR)\pod2html
792 POD2MAN = $(PODDIR)\pod2man
793 POD2LATEX = $(PODDIR)\pod2latex
794 POD2TEXT = $(PODDIR)\pod2text
796 # vars must be separated by "\t+~\t+", since we're using the tempfile
797 # version of config_sh.pl (we were overflowing someone's buffer by
798 # trying to fit them all on the command line)
801 INST_DRV=$(INST_DRV) ~ \
802 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
803 INST_VER=$(INST_VER:s/\/\\/) ~ \
804 INST_ARCH=$(INST_ARCH) ~ \
805 archname=$(ARCHNAME) ~ \
808 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
809 cf_email=$(EMAIL) ~ \
810 d_crypt=$(D_CRYPT) ~ \
811 d_mymalloc=$(PERL_MALLOC) ~ \
812 libs=$(LIBFILES:f) ~ \
813 incpath=$(CCINCDIR:s/\/\\/) ~ \
814 libperl=$(PERLIMPLIB:f) ~ \
815 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
822 static_ext=$(STATIC_EXT) ~ \
823 usethreads=$(USE_ITHREADS) ~ \
824 useithreads=$(USE_ITHREADS) ~ \
825 usemultiplicity=$(USE_MULTI) ~ \
826 useperlio=$(USE_PERLIO) ~ \
827 uselargefiles=$(USE_LARGE_FILES) ~ \
828 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
832 # set up targets varying between Win95 and WinNT builds
835 .IF "$(IS_WIN95)" == "define"
837 RIGHTMAKE = __switch_makefiles
848 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
849 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
852 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
854 #----------------------------------------------------------------
856 #-------------------- BEGIN Win95 SPECIFIC ----------------------
858 # this target is a jump-off point for Win95
859 # 1. it switches to the Win95-specific makefile if it exists
860 # (__do_switch_makefiles)
861 # 2. it prints a message when the Win95-specific one finishes (__done)
862 # 3. it then kills this makefile by trying to make __no_such_target
864 __switch_makefiles: __do_switch_makefiles __done __no_such_target
866 __do_switch_makefiles:
867 .IF "$(NOTFIRST)" != "true"
868 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
873 .IF "$(NOTFIRST)" != "true"
875 @echo Build process complete. Ignore any errors after this message.
876 @echo Run "dmake test" to test and "dmake install" to install
879 # dummy targets for Win95-specific makefile
889 # This target is used to generate the new makefile (.\makefile.95) for Win95
891 .\makefile.95: .\makefile.mk
892 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
894 #--------------------- END Win95 SPECIFIC ---------------------
896 # a blank target for when builds don't need to do certain things
897 # this target added for Win95 port but used to keep the WinNT port able to
902 $(GLOBEXE) : perlglob$(o)
903 .IF "$(CCTYPE)" == "BORLAND"
904 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
905 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
906 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
907 .ELIF "$(CCTYPE)" == "GCC"
908 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
910 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
911 perlglob$(o) setargv$(o)
914 perlglob$(o) : perlglob.c
916 config.w32 : $(CFGSH_TMPL)
917 copy $(CFGSH_TMPL) config.w32
919 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
921 copy $(CFGH_TMPL) config.h
923 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
924 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
925 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
927 # this target is for when changes to the main config.sh happen
928 # edit config.{b,v,g}c and make this target once for each supported
929 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
931 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
932 $(CFGSH_TMPL) > ..\config.sh
933 -cd .. && del /f perl.exe
934 -cd .. && del /f perl*.dll
935 cd .. && perl configpm
938 -perl config_h.PL "INST_VER=$(INST_VER)"
939 rename config.h $(CFGH_TMPL)
941 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
942 cd .. && miniperl configpm
943 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
944 $(XCOPY) ..\*.h $(COREDIR)\*.*
945 $(XCOPY) *.h $(COREDIR)\*.*
946 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
947 $(RCOPY) include $(COREDIR)\*.*
948 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
949 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
951 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
952 .IF "$(CCTYPE)" == "BORLAND"
953 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
954 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
955 .ELIF "$(CCTYPE)" == "GCC"
956 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
957 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
959 $(LINK32) -subsystem:console -out:$@ \
960 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
964 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
966 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
967 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
969 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
970 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
972 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
973 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
974 # unless the .IF is true), so instead we use a .ELSE with the default.
975 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
977 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
978 .IF "$(USE_IMP_SYS)" == "define"
979 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
981 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
984 # 1. we don't want to rebuild miniperl.exe when config.h changes
985 # 2. we don't want to rebuild miniperl.exe with non-default config.h
986 $(MINI_OBJ) : $(CORE_NOCFG_H)
988 $(WIN32_OBJ) : $(CORE_H)
989 $(CORE_OBJ) : $(CORE_H)
990 $(DLL_OBJ) : $(CORE_H)
991 $(X2P_OBJ) : $(CORE_H)
993 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
994 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
995 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
997 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
998 .IF "$(CCTYPE)" == "BORLAND"
999 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1000 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1005 .ELIF "$(CCTYPE)" == "GCC"
1006 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1007 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1008 dlltool --output-lib $(PERLIMPLIB) \
1009 --dllname $(PERLDLL:b).dll \
1011 --base-file perl.base \
1012 --output-exp perl.exp
1013 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1014 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1017 $(LINK32) -dll -def:perldll.def -out:$@ \
1018 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1019 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1021 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1023 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1024 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1026 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1027 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1029 ..\x2p\hash$(o) : ..\x2p\hash.c
1030 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1032 ..\x2p\str$(o) : ..\x2p\str.c
1033 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1035 ..\x2p\util$(o) : ..\x2p\util.c
1036 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1038 ..\x2p\walk$(o) : ..\x2p\walk.c
1039 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1041 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1042 $(MINIPERL) ..\x2p\find2perl.PL
1043 $(MINIPERL) ..\x2p\s2p.PL
1044 .IF "$(CCTYPE)" == "BORLAND"
1045 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1046 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1047 .ELIF "$(CCTYPE)" == "GCC"
1048 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1049 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1051 $(LINK32) -subsystem:console -out:$@ \
1052 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1055 perlmain.c : runperl.c
1056 copy runperl.c perlmain.c
1058 perlmain$(o) : perlmain.c
1059 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1061 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1062 .IF "$(CCTYPE)" == "BORLAND"
1063 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1064 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1066 $(PERLIMPLIB) $(LIBFILES)\n)
1067 .ELIF "$(CCTYPE)" == "GCC"
1068 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1069 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1071 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1072 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1074 copy $(PERLEXE) $(WPERLEXE)
1075 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1076 copy splittree.pl ..
1077 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1079 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1080 if not exist $(AUTODIR) mkdir $(AUTODIR)
1081 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1082 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1083 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1084 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1085 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1086 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1088 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1089 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1091 #----------------------------------------------------------------------------------
1092 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1093 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1096 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1098 #----------------------------------------------------------------------------------
1102 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1103 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1104 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1106 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1107 # so please check that script before making structural changes here
1108 utils: $(PERLEXE) $(X2P)
1109 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1110 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1111 copy ..\README.aix ..\pod\perlaix.pod
1112 copy ..\README.amiga ..\pod\perlamiga.pod
1113 copy ..\README.apollo ..\pod\perlapollo.pod
1114 copy ..\README.beos ..\pod\perlbeos.pod
1115 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1116 copy ..\README.ce ..\pod\perlce.pod
1117 copy ..\README.cn ..\pod\perlcn.pod
1118 copy ..\README.cygwin ..\pod\perlcygwin.pod
1119 copy ..\README.dgux ..\pod\perldgux.pod
1120 copy ..\README.dos ..\pod\perldos.pod
1121 copy ..\README.epoc ..\pod\perlepoc.pod
1122 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1123 copy ..\README.hpux ..\pod\perlhpux.pod
1124 copy ..\README.hurd ..\pod\perlhurd.pod
1125 copy ..\README.irix ..\pod\perlirix.pod
1126 copy ..\README.jp ..\pod\perljp.pod
1127 copy ..\README.ko ..\pod\perlko.pod
1128 copy ..\README.machten ..\pod\perlmachten.pod
1129 copy ..\README.macos ..\pod\perlmacos.pod
1130 copy ..\README.macosx ..\pod\perlmacosx.pod
1131 copy ..\README.mint ..\pod\perlmint.pod
1132 copy ..\README.mpeix ..\pod\perlmpeix.pod
1133 copy ..\README.netware ..\pod\perlnetware.pod
1134 copy ..\README.os2 ..\pod\perlos2.pod
1135 copy ..\README.os390 ..\pod\perlos390.pod
1136 copy ..\README.os400 ..\pod\perlos400.pod
1137 copy ..\README.plan9 ..\pod\perlplan9.pod
1138 copy ..\README.qnx ..\pod\perlqnx.pod
1139 copy ..\README.solaris ..\pod\perlsolaris.pod
1140 copy ..\README.tru64 ..\pod\perltru64.pod
1141 copy ..\README.tw ..\pod\perltw.pod
1142 copy ..\README.uts ..\pod\perluts.pod
1143 copy ..\README.vmesa ..\pod\perlvmesa.pod
1144 copy ..\README.vms ..\pod\perlvms.pod
1145 copy ..\README.vos ..\pod\perlvos.pod
1146 copy ..\README.win32 ..\pod\perlwin32.pod
1147 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1148 cd ..\lib && $(PERLEXE) lib_pm.PL
1149 $(PERLEXE) $(PL2BAT) $(UTILS)
1151 # Note that the pod cleanup in this next section is parsed (and regenerated
1152 # by pod/buildtoc so please check that script before making changes here
1155 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1156 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1158 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1159 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1160 -del /f $(LIBDIR)\XSLoader.pm
1161 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1162 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1163 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1164 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1165 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1166 -del /f $(LIBDIR)\PerlIO\scalar.pm
1167 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1168 -del /f $(LIBDIR)\File\Glob.pm
1169 -del /f $(LIBDIR)\Storable.pm
1170 -del /f $(LIBDIR)\Filter\Util\Call.pm
1171 -del /f $(LIBDIR)\Digest\MD5.pm
1172 -del /f $(LIBDIR)\MIME\Base64.pm
1173 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1174 -del /f $(LIBDIR)\Time\HiRes.pm
1175 -del /f $(LIBDIR)\List\Util.pm
1176 -del /f $(LIBDIR)\Scalar\Util.pm
1177 -del /f $(LIBDIR)\Unicode\Normalize.pm
1178 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1179 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1180 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1181 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1182 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1183 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1184 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1185 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1186 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1187 -if exist $(LIBDIR)\Digest rmdir /s $(LIBDIR)\Digest
1188 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1189 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1190 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1191 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1192 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1193 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1194 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1195 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1196 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1197 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1198 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1199 perldgux.pod perldos.pod perlepoc.pod perlfreebsd.pod \
1200 perlhpux.pod perlhurd.pod perlirix.pod perljp.pod perlko.pod \
1201 perlmachten.pod perlmacos.pod perlmacosx.pod perlmint.pod \
1202 perlmpeix.pod perlnetware.pod perlos2.pod perlos390.pod \
1203 perlos400.pod perlplan9.pod perlqnx.pod perlsolaris.pod \
1204 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
1205 perlvms.pod perlvos.pod perlwin32.pod \
1206 pod2html pod2latex pod2man pod2text pod2usage \
1207 podchecker podselect
1208 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1209 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1210 xsubpp instmodsh prove
1211 -cd ..\x2p && del /f find2perl s2p psed *.bat
1212 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1215 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1216 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1217 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1218 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1219 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1220 -if exist $(COREDIR) rmdir /s $(COREDIR)
1222 install : all installbare installhtml
1224 installbare : $(RIGHTMAKE) utils
1225 $(PERLEXE) ..\installperl
1226 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1227 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1228 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1231 $(RCOPY) html\*.* $(INST_HTML)\*.*
1233 inst_lib : $(CONFIGPM)
1234 copy splittree.pl ..
1235 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1236 $(RCOPY) ..\lib $(INST_LIB)\*.*
1238 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1239 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1240 .IF "$(CCTYPE)" == "BORLAND"
1241 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1243 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1248 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1250 test-prep : all utils
1251 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1252 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1253 .IF "$(CCTYPE)" == "BORLAND"
1254 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1256 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1259 test : $(RIGHTMAKE) test-prep
1260 cd ..\t && $(PERLEXE) -I..\lib harness
1262 test-notty : test-prep
1263 set PERL_SKIP_TTY_TEST=1 && \
1264 cd ..\t && $(PERLEXE) -I.\lib harness
1266 _test : $(RIGHTMAKE)
1267 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1268 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1269 .IF "$(CCTYPE)" == "BORLAND"
1270 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1272 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1274 cd ..\t && $(PERLEXE) -I..\lib harness
1276 clean : Extensions_clean
1277 -@erase miniperlmain$(o)
1279 -@erase perlglob$(o)
1280 -@erase perlmain$(o)
1288 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1289 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1290 -@erase $(WIN32_OBJ)
1293 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1294 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1295 -@erase ..\x2p\*.exe ..\x2p\*.bat
1299 # Handy way to run perlbug -ok without having to install and run the
1300 # installed perlbug. We don't re-run the tests here - we trust the user.
1301 # Please *don't* use this unless all tests pass.
1302 # If you want to report test failures, use "dmake nok" instead.
1304 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1307 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1310 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1313 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok