2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 or later
5 # Borland C++ 5.02 or later
6 # MinGW with gcc-2.95.2 or later
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl511.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual C++ 98)
101 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
105 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
106 #CCTYPE *= MSVC80FREE
107 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
110 #CCTYPE *= MSVC90FREE
111 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
113 # Borland 5.02 or later
115 # MinGW with gcc-2.95.2 or later
119 # uncomment this if your Borland compiler is older than v5.4.
122 # uncomment this if you want to use Borland's VCL as your CRT
126 # uncomment this if you are compiling under Windows 95/98 and command.com
127 # (not needed if you're running under 4DOS/NT 6.01 or later)
131 # uncomment next line if you want debug version of perl (big,slow)
132 # If not enabled, we automatically try to use maximum optimization
133 # with all compilers that are known to have a working optimizer.
138 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
139 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
140 # This currently requires VC 5.0 with Service Pack 3 or later.
141 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
142 # and follow the directions in the package to install.
144 # Not recommended if you have VC 6.x and you're not running Windows 9x.
146 #USE_PERLCRT *= define
149 # uncomment to enable linking with setargv.obj under the Visual C
150 # compiler. Setting this options enables perl to expand wildcards in
151 # arguments, but it may be harder to use alternate methods like
152 # File::DosGlob that are more powerful. This option is supported only with
155 #USE_SETARGV *= define
158 # if you want to have the crypt() builtin function implemented, leave this or
159 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
160 # version of des_fcrypt().
162 CRYPT_SRC *= fcrypt.c
165 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
166 # library, uncomment this, and make sure the library exists (see README.win32)
167 # Specify the full pathname of the library.
169 #CRYPT_LIB *= fcrypt.lib
172 # set this if you wish to use perl's malloc
173 # WARNING: Turning this on/off WILL break binary compatibility with extensions
174 # you may have compiled with/without it. Be prepared to recompile all
175 # extensions if you change the default. Currently, this cannot be enabled
176 # if you ask for USE_IMP_SYS above.
178 #PERL_MALLOC *= define
181 # set this to enable debugging mstats
182 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
183 # be enabled without PERL_MALLOC as well.
185 #DEBUG_MSTATS *= define
188 # set this to additionally provide a statically linked perl-static.exe.
189 # Note that dynamic loading will not work with this perl, so you must
190 # include required modules statically using the STATIC_EXT or ALL_STATIC
191 # variables below. A static library perl511s.lib will also be created.
192 # Ordinary perl.exe is not affected by this option.
194 #BUILD_STATIC *= define
197 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
198 # extension get statically built
199 # This will result in a very large perl executable, but the main purpose
200 # is to have proper linking set so as to be able to create miscellaneous
201 # executables with different built-in extensions
203 #ALL_STATIC *= define
206 # set the install locations of the compiler include/libraries
207 # Running VCVARS32.BAT is *required* when using Visual C.
208 # Some versions of Visual C don't define MSVCDIR in the environment,
209 # so you may have to set CCHOME explicitly (spaces in the path name should
212 .IF "$(CCTYPE)" == "BORLAND"
213 CCHOME *= C:\Borland\BCC55
214 .ELIF "$(CCTYPE)" == "GCC"
219 CCINCDIR *= $(CCHOME)\include
220 CCLIBDIR *= $(CCHOME)\lib
223 # Additional compiler flags can be specified here.
225 BUILDOPT *= $(BUILDOPTEXTRA)
228 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
229 # internal hash function unless the PERL_HASH_SEED environment variable is set.
230 # Alternatively, adding -DNO_HASH_SEED will completely disable the
231 # randomization feature.
232 # The latter is required to maintain binary compatibility with Perl 5.8.0.
234 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
235 #BUILDOPT += -DNO_HASH_SEED
238 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
239 # for old symbols by default, at the expense of extreme pollution. You most
240 # probably just want to build modules that won't compile with
241 # perl Makefile.PL POLLUTE=1
242 # instead of enabling this. Please report such modules to the respective
245 #BUILDOPT += -DPERL_POLLUTE
248 # This should normally be disabled. Enabling it will disable the File::Glob
249 # implementation of CORE::glob.
251 #BUILDOPT += -DPERL_EXTERNAL_GLOB
254 # This should normally be disabled. Enabling it causes perl to read scripts
255 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
257 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
260 # specify semicolon-separated list of extra directories that modules will
261 # look for libraries (spaces in path names need not be quoted)
266 # set this to point to cmd.exe (only needed if you use some
267 # alternate shell that doesn't grok cmd.exe style commands)
269 #SHELL *= g:\winnt\system32\cmd.exe
272 # set this to your email address (perl will guess a value from
273 # from your loginname and your hostname, which may not be right)
278 ## Build configuration ends.
281 ##################### CHANGE THESE ONLY IF YOU MUST #####################
283 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
287 CRYPT_FLAG = -DHAVE_DES_FCRYPT
291 DEBUG_MSTATS *= undef
293 USE_SITECUST *= undef
295 USE_ITHREADS *= undef
298 USE_LARGE_FILES *= undef
301 .IF "$(USE_IMP_SYS)" == "define"
305 .IF "$(PERL_MALLOC)" == "undef"
309 .IF "$(DEBUG_MSTATS)" == "define"
310 BUILDOPT += -DPERL_DEBUGGING_MSTATS
313 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
317 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
321 .IF "$(USE_SITECUST)" == "define"
322 BUILDOPT += -DUSE_SITECUSTOMIZE
325 .IF "$(USE_MULTI)" != "undef"
326 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
329 .IF "$(USE_IMP_SYS)" != "undef"
330 BUILDOPT += -DPERL_IMPLICIT_SYS
333 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432 WIN64
335 PROCESSOR_ARCHITECTURE *= x86
338 # When we are running from a 32bit cmd.exe on AMD64 then
339 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
341 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
342 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
344 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
351 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
352 .IF "$(ARCHITECTURE)" == "AMD64"
355 .IF "$(ARCHITECTURE)" == "IA64"
359 .IF "$(USE_MULTI)" == "define"
360 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
362 .IF "$(USE_PERLIO)" == "define"
363 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
365 ARCHNAME = MSWin32-$(ARCHITECTURE)
369 .IF "$(USE_ITHREADS)" == "define"
370 ARCHNAME !:= $(ARCHNAME)-thread
373 # Visual C++ 98, .NET 2003, 2005 and 2008 specific.
374 # VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
375 # in about 10% less time. (The free version of 7.x can't do this, but the free
376 # versions of 8.x and 9.x can.)
377 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
378 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" ||
379 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
380 DELAYLOAD *= -DELAYLOAD:ws2_32.dll delayimp.lib
383 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
384 # DLLs. These either need copying everywhere with the binaries, or else need
385 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
386 # simplicity, embed them if they exist (and delete them afterwards so that they
387 # don't get installed too).
388 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
389 if exist $@.manifest del $@.manifest
390 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
391 if exist $@.manifest del $@.manifest
393 ARCHDIR = ..\lib\$(ARCHNAME)
394 COREDIR = ..\lib\CORE
395 AUTODIR = ..\lib\auto
399 EXTUTILSDIR = $(LIBDIR)\ExtUtils
403 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
404 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
405 INST_LIB = $(INST_TOP)$(INST_VER)\lib
406 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
407 INST_COREDIR = $(INST_ARCHLIB)\CORE
408 INST_HTML = $(INST_TOP)$(INST_VER)\html
411 # Programs to compile, build .lib files and link
416 .IF "$(CCTYPE)" == "BORLAND"
419 .IF "$(BCCOLD)" != "define"
424 LIB32 = tlib /a /P128
431 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
432 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
433 DEFINES = -DWIN32 $(CRYPT_FLAG)
434 LOCDEFS = -DPERLDLL -DPERL_CORE
440 # same libs as MSVC, except Borland doesn't have oldnames.lib
441 LIBFILES = $(CRYPT_LIB) \
442 kernel32.lib user32.lib gdi32.lib winspool.lib \
443 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
444 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
445 version.lib odbc32.lib odbccp32.lib \
448 .IF "$(CFG)" == "Debug"
449 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
452 OPTIMIZE = -O2 -D_RTLDLL
457 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
458 $(PCHFLAGS) $(OPTIMIZE)
459 LINK_FLAGS = $(LINK_DBG) -x -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
464 .IF "$(BCCOLD)" != "define"
466 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
468 .IF "$(BCCVCL)" == "define"
469 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
470 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
474 .ELIF "$(CCTYPE)" == "GCC"
490 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
491 DEFINES = -DWIN32 $(CRYPT_FLAG)
492 LOCDEFS = -DPERLDLL -DPERL_CORE
496 # Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link
497 # correctly if -lmsvcrt is specified explicitly.
502 LIBFILES = $(CRYPT_LIB) $(LIBC) \
503 -lmoldname -lkernel32 -luser32 -lgdi32 \
504 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
505 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
506 -lwinmm -lversion -lodbc32 -lodbccp32
508 .IF "$(CFG)" == "Debug"
509 OPTIMIZE = -g -O2 -DDEBUGGING
517 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
518 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
523 # NOTE: we assume that GCC uses MSVCRT.DLL
524 # See comments about PERL_MSVCRT_READFIX in the "cl" compiler section below.
525 BUILDOPT += -fno-strict-aliasing -mms-bitfields -DPERL_MSVCRT_READFIX
531 LIB32 = $(LINK32) -lib
538 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
539 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
540 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
541 LOCDEFS = -DPERLDLL -DPERL_CORE
545 .IF "$(USE_PERLCRT)" != "define"
551 .IF "$(CFG)" == "Debug"
552 .IF "$(CCTYPE)" == "MSVC20"
553 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
555 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
559 OPTIMIZE = -MD -Zi -DNDEBUG
560 # we enable debug symbols in release builds also
561 LINK_DBG = -debug -opt:ref,icf
562 # you may want to enable this if you want COFF symbols in the executables
563 # in addition to the PDB symbols. The default Dr. Watson that ships with
564 # Windows can use the the former but not latter. The free WinDbg can be
565 # installed to get better stack traces from just the PDB symbols, so we
566 # avoid the bloat of COFF symbols by default.
567 #LINK_DBG = $(LINK_DBG) -debugtype:both
568 .IF "$(WIN64)" == "define"
569 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
573 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
579 .IF "$(WIN64)" == "define"
580 DEFINES += -DWIN64 -DCONSERVATIVE
581 OPTIMIZE += -Wp64 -fp:precise
584 # For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
585 # and POSIX CRT function names being deprecated.
586 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
587 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
588 DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
591 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
592 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
593 # do not require the fix.
594 .IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
595 .IF "$(USE_PERLCRT)" != "define"
596 BUILDOPT += -DPERL_MSVCRT_READFIX
600 LIBBASEFILES = $(CRYPT_LIB) \
601 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
602 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
603 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
604 version.lib odbc32.lib odbccp32.lib
606 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
607 # include the buffer overrun verification code used by the /GS switch.
608 # Since the code links against libraries that are compiled with /GS, this
609 # "security cookie verification" must be included via bufferoverlow.lib.
610 .IF "$(WIN64)" == "define"
611 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
614 # we add LIBC here, since we may be using PerlCRT.dll
615 LIBFILES = $(LIBBASEFILES) $(LIBC)
617 EXTRACFLAGS = -nologo -GF -W3
618 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
619 $(PCHFLAGS) $(OPTIMIZE)
620 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
621 -libpath:"$(INST_COREDIR)" \
622 -machine:$(PROCESSOR_ARCHITECTURE)
630 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
632 # used to allow local linking flags that are not propogated into Config.pm,
636 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
638 #################### do not edit below this line #######################
639 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
641 # Some old dmakes (including Sarathy's one at
642 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip)
643 # don't support logical OR (||) or logical AND (&&) in conditional
644 # expressions and hence don't process this makefile correctly. Determine
645 # whether this is the case so that we can give the user an error message.
662 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
665 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
668 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
674 .IF "$(CCTYPE)" == "BORLAND"
675 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
676 $(IMPLIB) $(*B).lib $@
677 .ELIF "$(CCTYPE)" == "GCC"
678 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
679 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
681 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
682 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
687 .IF "$(CCTYPE)" == "GCC"
688 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -i $< -o $@
695 MINIPERL = ..\miniperl.exe
697 PERLEXE = ..\perl.exe
698 WPERLEXE = ..\wperl.exe
699 PERLEXESTATIC = ..\perl-static.exe
700 GLOBEXE = ..\perlglob.exe
701 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
702 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
704 GENUUDMAP = ..\generate_uudmap.exe
705 .IF "$(BUILD_STATIC)" == "define"
711 # Unicode data files generated by mktables
712 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
713 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
714 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
715 ..\lib\unicore\PVA.pl
717 # Directories of Unicode data files generated by mktables
718 UNIDATADIR1 = ..\lib\unicore\To
719 UNIDATADIR2 = ..\lib\unicore\lib
721 PERLEXE_ICO = .\perlexe.ico
722 PERLEXE_RES = .\perlexe.res
725 # Nominate a target which causes extensions to be re-built
726 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
727 # on and really only the interface - i.e. the .def file used to export symbols
729 PERLDEP = perldll.def
732 PL2BAT = bin\pl2bat.pl
733 GLOBBAT = bin\perlglob.bat
749 ..\utils\config_data \
756 ..\utils\cpanp-run-perl \
777 .IF "$(CCTYPE)" == "BORLAND"
779 CFGSH_TMPL = config.bc
780 CFGH_TMPL = config_H.bc
782 .ELIF "$(CCTYPE)" == "GCC"
784 CFGSH_TMPL = config.gc
785 CFGH_TMPL = config_H.gc
786 PERLIMPLIB = ..\libperl511$(a)
787 PERLSTATICLIB = ..\libperl511s$(a)
791 .IF "$(WIN64)" == "define"
792 CFGSH_TMPL = config.vc64
793 CFGH_TMPL = config_H.vc64
795 CFGSH_TMPL = config.vc
796 CFGH_TMPL = config_H.vc
801 # makedef.pl must be updated if this changes, and this should normally
802 # only change when there is an incompatible revision of the public API.
803 PERLIMPLIB *= ..\perl511$(a)
804 PERLSTATICLIB *= ..\perl511s$(a)
805 PERLDLL = ..\perl511.dll
807 XCOPY = xcopy /f /r /i /d /y
808 RCOPY = xcopy /f /r /i /e /d /y
812 # filenames given to xsubpp must have forward slashes (since it puts
813 # full pathnames in #line strings)
814 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
854 EXTRACORE_SRC += perllib.c
856 .IF "$(PERL_MALLOC)" == "define"
857 EXTRACORE_SRC += ..\malloc.c
860 EXTRACORE_SRC += ..\perlio.c
867 # We need this for miniperl build unless we override canned
868 # config.h #define building mini\*
869 #.IF "$(USE_PERLIO)" == "define"
870 WIN32_SRC += .\win32io.c
873 .IF "$(CRYPT_SRC)" != ""
874 WIN32_SRC += .\$(CRYPT_SRC)
877 DLL_SRC = $(DYNALOADER).c
923 .\include\sys\socket.h \
926 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
928 UUDMAP_H = ..\uudmap.h
929 BITCOUNT_H = ..\bitcount.h
931 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
932 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
933 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
934 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
935 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
936 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
937 DLL_OBJ = $(DLL_SRC:db:+$(o))
938 X2P_OBJ = $(X2P_SRC:db:+$(o))
939 GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
941 PERLDLL_OBJ = $(CORE_OBJ)
942 PERLEXE_OBJ = perlmain$(o)
943 PERLEXEST_OBJ = perlmainst$(o)
945 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
947 .IF "$(USE_SETARGV)" != ""
948 SETARGV_OBJ = setargv$(o)
951 .IF "$(ALL_STATIC)" == "define"
952 # some exclusions, unfortunately, until fixed:
953 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
954 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
955 # - Encode (encoding search algorithm relies on shared library?)
956 STATIC_EXT = * !Win32 !SDBM_File !Encode
958 # specify static extensions here, for example:
959 #STATIC_EXT = Cwd Compress/Raw/Zlib
960 STATIC_EXT = Win32CORE
963 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
965 # vars must be separated by "\t+~\t+", since we're using the tempfile
966 # version of config_sh.pl (we were overflowing someone's buffer by
967 # trying to fit them all on the command line)
970 INST_DRV=$(INST_DRV) ~ \
971 INST_TOP=$(INST_TOP) ~ \
972 INST_VER=$(INST_VER) ~ \
973 INST_ARCH=$(INST_ARCH) ~ \
974 archname=$(ARCHNAME) ~ \
977 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
978 cf_email=$(EMAIL) ~ \
979 d_crypt=$(D_CRYPT) ~ \
980 d_mymalloc=$(PERL_MALLOC) ~ \
981 libs=$(LIBFILES:f) ~ \
982 incpath=$(CCINCDIR) ~ \
983 libperl=$(PERLIMPLIB:f) ~ \
984 libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
991 static_ext=$(STATIC_EXT) ~ \
992 usethreads=$(USE_ITHREADS) ~ \
993 useithreads=$(USE_ITHREADS) ~ \
994 usemultiplicity=$(USE_MULTI) ~ \
995 useperlio=$(USE_PERLIO) ~ \
996 uselargefiles=$(USE_LARGE_FILES) ~ \
997 usesitecustomize=$(USE_SITECUST) ~ \
998 LINK_FLAGS=$(LINK_FLAGS) ~ \
1002 # set up targets varying between Win95 and WinNT builds
1005 .IF "$(IS_WIN95)" == "define"
1007 RIGHTMAKE = __switch_makefiles
1013 .IMPORT .IGNORE : SystemRoot windir
1015 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
1016 ENV_OS=$(subst,OS=, $(shell @set OS))
1018 .IF "$(ENV_OS)" == "Windows_NT"
1019 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
1021 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
1028 all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1029 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
1030 $(PERLEXE) $(X2P) Extensions $(PERLSTATIC)
1032 ..\regcharclass.h : ..\Porting\regcharclass.pl
1033 cd .. && miniperl Porting\regcharclass.pl && cd win32
1035 regnodes : ..\regnodes.h
1037 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
1039 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
1041 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1042 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
1043 $(X2P) Extensions_reonly
1045 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
1047 static: $(PERLEXESTATIC)
1049 #----------------------------------------------------------------
1051 #-------------------- BEGIN Win95 SPECIFIC ----------------------
1053 # this target is a jump-off point for Win95
1054 # 1. it switches to the Win95-specific makefile if it exists
1055 # (__do_switch_makefiles)
1056 # 2. it prints a message when the Win95-specific one finishes (__done)
1057 # 3. it then kills this makefile by trying to make __no_such_target
1059 __switch_makefiles: __do_switch_makefiles __done __no_such_target
1061 __do_switch_makefiles:
1062 .IF "$(NOTFIRST)" != "true"
1063 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
1068 .IF "$(NOTFIRST)" != "true"
1070 @echo Build process complete. Ignore any errors after this message.
1071 @echo Run "dmake test" to test and "dmake install" to install
1074 # dummy targets for Win95-specific makefile
1084 # This target is used to generate the new makefile (.\makefile.95) for Win95
1086 .\makefile.95: .\makefile.mk
1087 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1089 #--------------------- END Win95 SPECIFIC ---------------------
1091 # a blank target for when builds don't need to do certain things
1092 # this target added for Win95 port but used to keep the WinNT port able to
1098 .IF "$(NEWDMAKE)" == "define"
1101 @echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions.
1102 @echo Please get the latest dmake from http://search.cpan.org/dist/dmake/
1106 $(GLOBEXE) : perlglob$(o)
1107 .IF "$(CCTYPE)" == "BORLAND"
1108 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1109 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1110 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1111 .ELIF "$(CCTYPE)" == "GCC"
1112 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1114 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1115 perlglob$(o) setargv$(o)
1119 perlglob$(o) : perlglob.c
1121 config.w32 : $(CFGSH_TMPL)
1122 copy $(CFGSH_TMPL) config.w32
1124 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1126 copy $(CFGH_TMPL) config.h
1128 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
1129 cd .. && miniperl -Ilib make_patchnum.pl
1131 # make sure that we recompile perl.c if the git version changes
1132 ..\perl$(o) : ..\git_version.h
1134 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1135 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1136 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1138 # this target is for when changes to the main config.sh happen.
1139 # edit config.gc, then make perl using GCC in a minimal configuration (i.e.
1140 # with MULTI, ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make
1141 # this target to regenerate config_H.gc.
1142 # unfortunately, some further manual editing is also then required to restore all
1143 # the special _MSC_VER handling that is otherwise lost.
1144 # repeat for config.bc and config_H.bc (using BORLAND), except that there is no
1145 # _MSC_VER stuff in that case.
1147 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1148 $(CFGSH_TMPL) > ..\config.sh
1149 cd .. && miniperl configpm
1150 -del /f $(CFGH_TMPL)
1151 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
1152 rename config.h $(CFGH_TMPL)
1154 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1155 cd .. && miniperl configpm
1156 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1157 $(XCOPY) ..\*.h $(COREDIR)\*.*
1158 $(XCOPY) *.h $(COREDIR)\*.*
1159 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1160 $(RCOPY) include $(COREDIR)\*.*
1161 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1162 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1164 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1165 .IF "$(CCTYPE)" == "BORLAND"
1166 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1167 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1168 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1169 @$(mktmp c0x32$(o) $(MINI_OBJ),$@,,$(LIBFILES),)
1170 .ELIF "$(CCTYPE)" == "GCC"
1171 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1172 $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
1174 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1175 @$(mktmp $(LIBFILES) $(MINI_OBJ))
1180 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1182 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1183 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c
1185 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1186 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1188 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1189 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1190 # unless the .IF is true), so instead we use a .ELSE with the default.
1191 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1193 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1194 .IF "$(USE_IMP_SYS)" == "define"
1195 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1197 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1200 # 1. we don't want to rebuild miniperl.exe when config.h changes
1201 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1202 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
1203 $(MINI_OBJ) : $(CORE_NOCFG_H)
1205 $(WIN32_OBJ) : $(CORE_H)
1207 $(CORE_OBJ) : $(CORE_H)
1209 $(DLL_OBJ) : $(CORE_H)
1211 $(X2P_OBJ) : $(CORE_H)
1213 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
1214 $(MINIPERL) -I..\lib create_perllibst_h.pl
1215 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1216 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1218 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1219 .IF "$(CCTYPE)" == "BORLAND"
1220 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1221 @$(mktmp c0d32$(o) $(PERLDLL_OBJ),$@,, \
1222 $(shell @type Extensions_static) $(LIBFILES),perldll.def)
1224 .ELIF "$(CCTYPE)" == "GCC"
1225 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1226 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1227 $(shell @type Extensions_static) \
1228 $(LIBFILES) $(LKPOST))
1229 dlltool --output-lib $(PERLIMPLIB) \
1230 --dllname $(PERLDLL:b).dll \
1232 --base-file perl.base \
1233 --output-exp perl.exp
1234 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1235 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1236 $(shell @type Extensions_static) \
1237 $(LIBFILES) perl.exp $(LKPOST))
1239 $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
1240 @Extensions_static \
1241 @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1242 $(PERLDLL_RES) $(PERLDLL_OBJ))
1245 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1247 $(PERLSTATICLIB): Extensions_static
1248 .IF "$(CCTYPE)" == "BORLAND"
1249 $(LIB32) $(LIB_FLAGS) $@ \
1250 @$(mktmp $(shell @type Extensions_static) \
1252 .ELIF "$(CCTYPE)" == "GCC"
1253 # XXX: It would be nice if MinGW's ar accepted a temporary file, but this
1254 # doesn't seem to work:
1255 # $(LIB32) $(LIB_FLAGS) $@ \
1256 # $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1257 # $(PERLDLL_OBJ) $(LKPOST))
1258 $(LIB32) $(LIB_FLAGS) $@ \
1259 $(shell @type Extensions_static) \
1262 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1263 @$(mktmp $(PERLDLL_OBJ))
1265 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1267 $(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
1268 $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
1270 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1272 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1273 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1275 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1276 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1278 ..\x2p\hash$(o) : ..\x2p\hash.c
1279 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1281 ..\x2p\str$(o) : ..\x2p\str.c
1282 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1284 ..\x2p\util$(o) : ..\x2p\util.c
1285 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1287 ..\x2p\walk$(o) : ..\x2p\walk.c
1288 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1290 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1291 $(MINIPERL) ..\x2p\find2perl.PL
1292 $(MINIPERL) ..\x2p\s2p.PL
1293 .IF "$(CCTYPE)" == "BORLAND"
1294 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1295 @$(mktmp c0x32$(o) $(X2P_OBJ),$@,,$(LIBFILES),)
1296 .ELIF "$(CCTYPE)" == "GCC"
1297 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1298 $(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST))
1300 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1301 @$(mktmp $(LIBFILES) $(X2P_OBJ))
1305 $(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
1307 $(UUDMAP_H) $(BITCOUNT_H) : $(GENUUDMAP)
1308 $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
1310 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1311 .IF "$(CCTYPE)" == "BORLAND"
1312 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1313 @$(mktmp c0x32$(o) $(GENUUDMAP_OBJ),$@,,$(LIBFILES),)
1314 .ELIF "$(CCTYPE)" == "GCC"
1315 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1316 $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
1318 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1319 @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ))
1323 perlmain.c : runperl.c
1324 copy runperl.c perlmain.c
1326 perlmain$(o) : perlmain.c
1327 $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c
1329 perlmainst.c : runperl.c
1330 copy runperl.c perlmainst.c
1332 perlmainst$(o) : perlmainst.c
1333 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1335 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1336 .IF "$(CCTYPE)" == "BORLAND"
1337 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1338 @$(mktmp c0x32$(o) $(PERLEXE_OBJ),$@,, \
1339 $(PERLIMPLIB) $(LIBFILES),,$(PERLEXE_RES))
1340 .ELIF "$(CCTYPE)" == "GCC"
1341 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1342 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1344 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1345 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1348 copy $(PERLEXE) $(WPERLEXE)
1349 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1350 copy splittree.pl ..
1351 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1353 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1354 .IF "$(CCTYPE)" == "BORLAND"
1355 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1356 @$(mktmp c0x32$(o) $(PERLEXEST_OBJ),$@,, \
1357 $(shell @type Extensions_static) $(PERLSTATICLIB) $(LIBFILES),, \
1359 .ELIF "$(CCTYPE)" == "GCC"
1360 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1361 $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1362 $(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) \
1363 $(PERLEXE_RES) $(LKPOST))
1365 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1366 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1367 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1371 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1372 if not exist $(AUTODIR) mkdir $(AUTODIR)
1373 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1374 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1375 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1376 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1377 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1378 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1380 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1381 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1383 MakePPPort: $(MINIPERL) $(CONFIGPM)
1384 $(MINIPERL) -I..\lib ..\mkppport
1387 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1389 #-------------------------------------------------------------------------------
1390 Extensions : ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1391 $(XCOPY) ..\*.h $(COREDIR)\*.*
1392 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynamic
1394 Extensions_reonly : ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1395 $(XCOPY) ..\*.h $(COREDIR)\*.*
1396 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynamic +re
1398 Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1399 $(XCOPY) ..\*.h $(COREDIR)\*.*
1400 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --static
1401 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1404 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all --target=clean
1406 Extensions_realclean :
1407 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all --target=realclean
1409 #-------------------------------------------------------------------------------
1413 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1414 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1415 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1417 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1418 # so please check that script before making structural changes here
1419 utils: $(PERLEXE) $(X2P)
1420 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1421 copy ..\README.aix ..\pod\perlaix.pod
1422 copy ..\README.amiga ..\pod\perlamiga.pod
1423 copy ..\README.apollo ..\pod\perlapollo.pod
1424 copy ..\README.beos ..\pod\perlbeos.pod
1425 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1426 copy ..\README.ce ..\pod\perlce.pod
1427 copy ..\README.cn ..\pod\perlcn.pod
1428 copy ..\README.cygwin ..\pod\perlcygwin.pod
1429 copy ..\README.dgux ..\pod\perldgux.pod
1430 copy ..\README.dos ..\pod\perldos.pod
1431 copy ..\README.epoc ..\pod\perlepoc.pod
1432 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1433 copy ..\README.haiku ..\pod\perlhaiku.pod
1434 copy ..\README.hpux ..\pod\perlhpux.pod
1435 copy ..\README.hurd ..\pod\perlhurd.pod
1436 copy ..\README.irix ..\pod\perlirix.pod
1437 copy ..\README.jp ..\pod\perljp.pod
1438 copy ..\README.ko ..\pod\perlko.pod
1439 copy ..\README.linux ..\pod\perllinux.pod
1440 copy ..\README.macos ..\pod\perlmacos.pod
1441 copy ..\README.macosx ..\pod\perlmacosx.pod
1442 copy ..\README.mpeix ..\pod\perlmpeix.pod
1443 copy ..\README.netware ..\pod\perlnetware.pod
1444 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1445 copy ..\README.os2 ..\pod\perlos2.pod
1446 copy ..\README.os390 ..\pod\perlos390.pod
1447 copy ..\README.os400 ..\pod\perlos400.pod
1448 copy ..\README.plan9 ..\pod\perlplan9.pod
1449 copy ..\README.qnx ..\pod\perlqnx.pod
1450 copy ..\README.riscos ..\pod\perlriscos.pod
1451 copy ..\README.solaris ..\pod\perlsolaris.pod
1452 copy ..\README.symbian ..\pod\perlsymbian.pod
1453 copy ..\README.tru64 ..\pod\perltru64.pod
1454 copy ..\README.tw ..\pod\perltw.pod
1455 copy ..\README.uts ..\pod\perluts.pod
1456 copy ..\README.vmesa ..\pod\perlvmesa.pod
1457 copy ..\README.vos ..\pod\perlvos.pod
1458 copy ..\README.win32 ..\pod\perlwin32.pod
1459 copy ..\pod\perl5110delta.pod ..\pod\perldelta.pod
1460 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1461 cd ..\lib && $(PERLEXE) lib_pm.PL
1462 $(PERLEXE) $(PL2BAT) $(UTILS)
1463 $(PERLEXE) ..\autodoc.pl ..
1464 $(PERLEXE) ..\pod\perlmodlib.pl -q
1465 $(PERLEXE) ..\pod\buildtoc --build-toc -q
1467 # Note that the pod cleanup in this next section is parsed (and regenerated
1468 # by pod/buildtoc so please check that script before making changes here
1470 distclean: realclean
1471 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1472 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
1473 $(PERLEXESTATIC) $(PERLSTATICLIB)
1475 -del /f $(DYNALOADER).c
1476 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1477 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1478 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1479 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1480 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1481 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1482 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1483 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1484 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1485 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1486 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1487 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1488 -del /f $(LIBDIR)\Devel\PPPort.pm
1489 -del /f $(LIBDIR)\File\Glob.pm
1490 -del /f $(LIBDIR)\Storable.pm
1491 -del /f $(LIBDIR)\Digest\MD5.pm
1492 -del /f $(LIBDIR)\Digest\SHA.pm
1493 -del /f $(LIBDIR)\PerlIO\encoding.pm
1494 -del /f $(LIBDIR)\PerlIO\scalar.pm
1495 -del /f $(LIBDIR)\PerlIO\via.pm
1496 -del /f $(LIBDIR)\Sys\Hostname.pm
1497 -del /f $(LIBDIR)\threads\shared.pm
1498 -del /f $(LIBDIR)\Time\HiRes.pm
1499 -del /f $(LIBDIR)\Unicode\Normalize.pm
1500 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1501 -del /f $(LIBDIR)\Win32.pm
1502 -del /f $(LIBDIR)\Win32CORE.pm
1503 -del /f $(LIBDIR)\Win32API\File.pm
1504 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1505 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1506 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1507 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1508 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1509 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1510 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1511 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1512 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1513 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1514 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1515 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1516 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1517 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1518 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1519 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1520 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1521 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1522 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1523 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1524 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1525 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1526 -cd $(PODDIR) && del /f *.html *.bat podchecker \
1527 perlaix.pod perlamiga.pod perlapi.pod perlapollo.pod \
1528 perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
1529 perlcygwin.pod perldelta.pod perldgux.pod perldos.pod \
1530 perlepoc.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1531 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1532 perllinux.pod perlmacos.pod perlmacosx.pod \
1533 perlmodlib.pod perlmpeix.pod perlnetware.pod perlopenbsd.pod \
1534 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1535 perlqnx.pod perlriscos.pod perlsolaris.pod perlsymbian.pod \
1536 perltoc.pod perltru64.pod perltw.pod perluts.pod perlvmesa.pod \
1537 perlvos.pod perlwin32.pod \
1538 pod2html pod2latex pod2man pod2text pod2usage \
1540 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1541 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1542 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1543 -cd ..\x2p && del /f find2perl s2p psed *.bat
1544 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1547 -del /f ..\lib\Config_git.pl
1550 -del /f $(PERLEXE_ICO) perl.base
1551 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1552 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1553 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1554 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1555 -if exist pod2htmd.tmp del pod2htmd.tmp
1556 -if exist pod2htmi.tmp del pod2htmi.tmp
1557 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1558 -del /f ..\t\test_state
1560 install : all installbare installhtml
1562 installbare : $(RIGHTMAKE) utils
1563 $(PERLEXE) ..\installperl
1564 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1565 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1566 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1567 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1568 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1569 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1572 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1574 inst_lib : $(CONFIGPM)
1575 copy splittree.pl ..
1576 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1577 $(RCOPY) ..\lib $(INST_LIB)\*.*
1579 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1580 cd ..\lib\unicore && \
1581 ..\$(MINIPERL) -I.. mktables
1583 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1584 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1585 if exist ..\t\perl.exe del /f ..\t\perl.exe
1586 rename ..\t\miniperl.exe perl.exe
1587 .IF "$(CCTYPE)" == "BORLAND"
1588 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1590 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1594 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1597 $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
1599 cleanup_unpacked_files:
1600 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
1602 test-prep : all utils unpack_files
1603 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1604 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1605 .IF "$(CCTYPE)" == "BORLAND"
1606 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1608 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1611 test : $(RIGHTMAKE) test-prep
1612 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1614 test-reonly : reonly utils
1615 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1616 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1617 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1619 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA) && \
1623 cd .. && regen.pl && cd win32
1625 test-notty : test-prep
1626 set PERL_SKIP_TTY_TEST=1 && \
1627 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1629 _test : $(RIGHTMAKE)
1630 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1631 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1632 .IF "$(CCTYPE)" == "BORLAND"
1633 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1635 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1637 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1640 -@erase miniperlmain$(o)
1642 -@erase perlglob$(o)
1643 -@erase perlmain$(o)
1644 -@erase perlmainst$(o)
1647 -@erase /f ..\git_version.h
1651 -@erase $(PERLEXESTATIC)
1652 -@erase $(PERLSTATICLIB)
1655 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
1656 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1657 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1658 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1659 -@erase $(UNIDATAFILES)
1660 -@erase $(WIN32_OBJ)
1663 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1664 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1665 -@erase ..\x2p\*.exe ..\x2p\*.bat
1669 -@erase Extensions_static
1673 _preclean : cleanup_unpacked_files
1675 clean : _preclean Extensions_clean _clean
1677 realclean : _preclean Extensions_realclean MakePPPort_clean _clean
1679 # Handy way to run perlbug -ok without having to install and run the
1680 # installed perlbug. We don't re-run the tests here - we trust the user.
1681 # Please *don't* use this unless all tests pass.
1682 # If you want to report test failures, use "dmake nok" instead.
1684 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1687 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1690 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1693 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok