2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 or later
5 # Borland C++ 5.02 or later
6 # MinGW with gcc-2.95.2 or later
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual C++ 98)
101 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
105 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
106 #CCTYPE *= MSVC80FREE
107 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # Borland 5.02 or later
111 # MinGW with gcc-2.95.2 or later
115 # uncomment this if your Borland compiler is older than v5.4.
118 # uncomment this if you want to use Borland's VCL as your CRT
122 # uncomment this if you are compiling under Windows 95/98 and command.com
123 # (not needed if you're running under 4DOS/NT 6.01 or later)
127 # uncomment next line if you want debug version of perl (big,slow)
128 # If not enabled, we automatically try to use maximum optimization
129 # with all compilers that are known to have a working optimizer.
134 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
135 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
136 # This currently requires VC 5.0 with Service Pack 3 or later.
137 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
138 # and follow the directions in the package to install.
140 # Not recommended if you have VC 6.x and you're not running Windows 9x.
142 #USE_PERLCRT *= define
145 # uncomment to enable linking with setargv.obj under the Visual C
146 # compiler. Setting this options enables perl to expand wildcards in
147 # arguments, but it may be harder to use alternate methods like
148 # File::DosGlob that are more powerful. This option is supported only with
151 #USE_SETARGV *= define
154 # if you want to have the crypt() builtin function implemented, leave this or
155 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
156 # version of des_fcrypt().
158 CRYPT_SRC *= fcrypt.c
161 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
162 # library, uncomment this, and make sure the library exists (see README.win32)
163 # Specify the full pathname of the library.
165 #CRYPT_LIB *= fcrypt.lib
168 # set this if you wish to use perl's malloc
169 # WARNING: Turning this on/off WILL break binary compatibility with extensions
170 # you may have compiled with/without it. Be prepared to recompile all
171 # extensions if you change the default. Currently, this cannot be enabled
172 # if you ask for USE_IMP_SYS above.
174 #PERL_MALLOC *= define
177 # set this to enable debugging mstats
178 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
179 # be enabled without PERL_MALLOC as well.
181 #DEBUG_MSTATS *= define
184 # set this to additionally provide a statically linked perl-static.exe.
185 # Note that dynamic loading will not work with this perl, so you must
186 # include required modules statically using STATIC_EXT variable below.
187 # A static library perl59s.lib will also be created.
188 # Ordinary perl.exe is not affected by this option.
190 #BUILD_STATIC *= define
193 # set the install locations of the compiler include/libraries
194 # Running VCVARS32.BAT is *required* when using Visual C.
195 # Some versions of Visual C don't define MSVCDIR in the environment,
196 # so you may have to set CCHOME explicitly (spaces in the path name should
199 .IF "$(CCTYPE)" == "BORLAND"
200 CCHOME *= C:\Borland\BCC55
201 .ELIF "$(CCTYPE)" == "GCC"
206 CCINCDIR *= $(CCHOME)\include
207 CCLIBDIR *= $(CCHOME)\lib
210 # Additional compiler flags can be specified here.
212 BUILDOPT *= $(BUILDOPTEXTRA)
215 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
216 # internal hash function unless the PERL_HASH_SEED environment variable is set.
217 # Alternatively, adding -DNO_HASH_SEED will completely disable the
218 # randomization feature.
219 # The latter is required to maintain binary compatibility with Perl 5.8.0.
221 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
222 #BUILDOPT += -DNO_HASH_SEED
225 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
226 # for old symbols by default, at the expense of extreme pollution. You most
227 # probably just want to build modules that won't compile with
228 # perl Makefile.PL POLLUTE=1
229 # instead of enabling this. Please report such modules to the respective
232 #BUILDOPT += -DPERL_POLLUTE
235 # This should normally be disabled. Enabling it will disable the File::Glob
236 # implementation of CORE::glob.
238 #BUILDOPT += -DPERL_EXTERNAL_GLOB
241 # This should normally be disabled. Enabling it causes perl to read scripts
242 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
244 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
247 # specify semicolon-separated list of extra directories that modules will
248 # look for libraries (spaces in path names need not be quoted)
253 # set this to point to cmd.exe (only needed if you use some
254 # alternate shell that doesn't grok cmd.exe style commands)
256 #SHELL *= g:\winnt\system32\cmd.exe
259 # set this to your email address (perl will guess a value from
260 # from your loginname and your hostname, which may not be right)
265 ## Build configuration ends.
268 ##################### CHANGE THESE ONLY IF YOU MUST #####################
270 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
274 CRYPT_FLAG = -DHAVE_DES_FCRYPT
278 DEBUG_MSTATS *= undef
280 USE_SITECUST *= undef
282 USE_ITHREADS *= undef
285 USE_LARGE_FILES *= undef
288 .IF "$(USE_IMP_SYS)" == "define"
292 .IF "$(PERL_MALLOC)" == "undef"
296 .IF "$(DEBUG_MSTATS)" == "define"
297 BUILDOPT += -DPERL_DEBUGGING_MSTATS
300 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
304 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
308 .IF "$(USE_SITECUST)" == "define"
309 BUILDOPT += -DUSE_SITECUSTOMIZE
312 .IF "$(USE_MULTI)" != "undef"
313 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
316 .IF "$(USE_IMP_SYS)" != "undef"
317 BUILDOPT += -DPERL_IMPLICIT_SYS
320 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
322 PROCESSOR_ARCHITECTURE *= x86
325 # When we are running from a 32bit cmd.exe on AMD64 then
326 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
328 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
329 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
331 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
338 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
339 .IF "$(ARCHITECTURE)" == "AMD64"
342 .IF "$(ARCHITECTURE)" == "IA64"
346 .IF "$(USE_MULTI)" == "define"
347 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
349 .IF "$(USE_PERLIO)" == "define"
350 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
352 ARCHNAME = MSWin32-$(ARCHITECTURE)
356 .IF "$(USE_ITHREADS)" == "define"
357 ARCHNAME !:= $(ARCHNAME)-thread
360 # Visual C++ 98, .NET 2003 and 2005 specific.
361 # VC++ 6.x, 7.x and 8.x can load DLL's on demand. Makes the test suite run in
362 # about 10% less time. (The free version of 7.x can't do this, but the free
363 # version of 8.x can.)
364 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" \
365 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
366 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
369 # Visual C++ 2005 (VC++ 8.x) creates manifest files for EXEs and DLLs. These
370 # either need copying everywhere with the binaries, or else need embedding in
371 # them otherwise MSVCR80.dll won't be found. Embed them for simplicity, and
372 # delete them afterwards so that they don't get installed too.
373 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
374 EMBED_EXE_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
376 EMBED_DLL_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
380 ARCHDIR = ..\lib\$(ARCHNAME)
381 COREDIR = ..\lib\CORE
382 AUTODIR = ..\lib\auto
386 EXTUTILSDIR = $(LIBDIR)\ExtUtils
390 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
391 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
392 INST_LIB = $(INST_TOP)$(INST_VER)\lib
393 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
394 INST_COREDIR = $(INST_ARCHLIB)\CORE
395 INST_HTML = $(INST_TOP)$(INST_VER)\html
398 # Programs to compile, build .lib files and link
403 .IF "$(CCTYPE)" == "BORLAND"
406 .IF "$(BCCOLD)" != "define"
411 LIB32 = tlib /a /P128
418 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
419 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
420 DEFINES = -DWIN32 $(CRYPT_FLAG)
421 LOCDEFS = -DPERLDLL -DPERL_CORE
427 # same libs as MSVC, except Borland doesn't have oldnames.lib
428 LIBFILES = $(CRYPT_LIB) \
429 kernel32.lib user32.lib gdi32.lib winspool.lib \
430 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
431 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
432 version.lib odbc32.lib odbccp32.lib \
435 .IF "$(CFG)" == "Debug"
436 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
439 OPTIMIZE = -O2 -D_RTLDLL
444 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
445 $(PCHFLAGS) $(OPTIMIZE)
446 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
451 .IF "$(BCCOLD)" != "define"
453 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
455 .IF "$(BCCVCL)" == "define"
456 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
457 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
461 .ELIF "$(CCTYPE)" == "GCC"
477 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
478 DEFINES = -DWIN32 $(CRYPT_FLAG)
479 LOCDEFS = -DPERLDLL -DPERL_CORE
486 LIBFILES = $(CRYPT_LIB) $(LIBC) \
487 -lmoldname -lkernel32 -luser32 -lgdi32 \
488 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
489 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
490 -lwinmm -lversion -lodbc32 -lodbccp32
492 .IF "$(CFG)" == "Debug"
493 OPTIMIZE = -g -O2 -DDEBUGGING
501 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
502 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
507 # NOTE: we assume that GCC uses MSVCRT.DLL
508 # See comments about PERL_MSVCRT_READFIX in the "cl" compiler section below.
509 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
515 LIB32 = $(LINK32) -lib
522 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
523 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
524 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
525 LOCDEFS = -DPERLDLL -DPERL_CORE
529 .IF "$(USE_PERLCRT)" != "define"
535 .IF "$(CFG)" == "Debug"
536 .IF "$(CCTYPE)" == "MSVC20"
537 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
539 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
543 OPTIMIZE = -MD -Zi -DNDEBUG
544 # we enable debug symbols in release builds also
545 LINK_DBG = -debug -opt:ref,icf
546 # you may want to enable this if you want COFF symbols in the executables
547 # in addition to the PDB symbols. The default Dr. Watson that ships with
548 # Windows can use the the former but not latter. The free WinDbg can be
549 # installed to get better stack traces from just the PDB symbols, so we
550 # avoid the bloat of COFF symbols by default.
551 #LINK_DBG = $(LINK_DBG) -debugtype:both
552 .IF "$(WIN64)" == "define"
553 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
557 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
563 .IF "$(WIN64)" == "define"
564 DEFINES += -DWIN64 -DCONSERVATIVE
565 OPTIMIZE += -Wp64 -fp:precise
568 # For now, silence VC++ 8.x's warnings about "unsafe" CRT functions and POSIX
569 # CRT function names being deprecated.
570 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
571 DEFINES += -D_CRT_SECURE_NO_DEPRECATE -wd4996
574 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
575 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
576 # do not require the fix.
577 .IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
578 .IF "$(USE_PERLCRT)" != "define"
579 BUILDOPT += -DPERL_MSVCRT_READFIX
583 LIBBASEFILES = $(CRYPT_LIB) \
584 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
585 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
586 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
587 version.lib odbc32.lib odbccp32.lib
589 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
590 # include the buffer overrun verification code used by the /GS switch.
591 # Since the code links against libraries that are compiled with /GS, this
592 # "security cookie verification" must be included via bufferoverlow.lib.
593 .IF "$(WIN64)" == "define"
594 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
597 # we add LIBC here, since we may be using PerlCRT.dll
598 LIBFILES = $(LIBBASEFILES) $(LIBC)
600 EXTRACFLAGS = -nologo -GF -W3
601 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
602 $(PCHFLAGS) $(OPTIMIZE)
603 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
604 -libpath:"$(INST_COREDIR)" \
605 -machine:$(PROCESSOR_ARCHITECTURE)
613 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
615 # used to allow local linking flags that are not propogated into Config.pm,
619 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
621 #################### do not edit below this line #######################
622 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
624 # Some dmake's built with Borland C++, including Sarathy's one at:
625 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
626 # require backslashes to be doubled-up when written to $(mktmp) files.
627 # Other dmake's do not require this and would actually output a double
628 # backslash if they were doubled-up.
629 .IF "$(shell @type $(mktmp \\))"=="\\"
635 # There is a related issue with other escape sequences: Sarathy's old
636 # dmake automatically maps escape sequences like \n to their ASCII values
637 # when used in macros, while other dmake's only do so if this behaviour
638 # is explicitly requested with the :m modifier.
640 .IF "$(shell @type $(mktmp \n))"=="\n"
656 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
659 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
662 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
668 .IF "$(CCTYPE)" == "BORLAND"
669 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
670 $(IMPLIB) $(*B).lib $@
671 .ELIF "$(CCTYPE)" == "GCC"
672 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
673 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
675 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
676 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
681 .IF "$(CCTYPE)" == "GCC"
682 $(RSC) --use-temp-file -I . -I .. -O COFF -i $< -o $@
689 MINIPERL = ..\miniperl.exe
691 PERLEXE = ..\perl.exe
692 WPERLEXE = ..\wperl.exe
693 PERLEXESTATIC = ..\perl-static.exe
694 GLOBEXE = ..\perlglob.exe
695 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
696 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
698 GENUUDMAP = ..\generate_uudmap.exe
699 .IF "$(BUILD_STATIC)" == "define"
705 # Unicode data files generated by mktables
706 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
707 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
708 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
709 ..\lib\unicore\PVA.pl
711 # Directories of Unicode data files generated by mktables
712 UNIDATADIR1 = ..\lib\unicore\To
713 UNIDATADIR2 = ..\lib\unicore\lib
715 PERLEXE_ICO = .\perlexe.ico
716 PERLEXE_RES = .\perlexe.res
719 # Nominate a target which causes extensions to be re-built
720 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
721 # on and really only the interface - i.e. the .def file used to export symbols
723 PERLDEP = perldll.def
726 PL2BAT = bin\pl2bat.pl
727 GLOBBAT = bin\perlglob.bat
743 ..\utils\config_data \
750 ..\utils\cpanp-run-perl \
772 .IF "$(CCTYPE)" == "BORLAND"
774 CFGSH_TMPL = config.bc
775 CFGH_TMPL = config_H.bc
777 .ELIF "$(CCTYPE)" == "GCC"
779 CFGSH_TMPL = config.gc
780 CFGH_TMPL = config_H.gc
781 PERLIMPLIB = ..\libperl59$(a)
782 PERLSTATICLIB = ..\libperl59s$(a)
786 .IF "$(WIN64)" == "define"
787 CFGSH_TMPL = config.vc64
788 CFGH_TMPL = config_H.vc64
790 CFGSH_TMPL = config.vc
791 CFGH_TMPL = config_H.vc
796 # makedef.pl must be updated if this changes, and this should normally
797 # only change when there is an incompatible revision of the public API.
798 PERLIMPLIB *= ..\perl59$(a)
799 PERLSTATICLIB *= ..\perl59s$(a)
800 PERLDLL = ..\perl59.dll
802 XCOPY = xcopy /f /r /i /d /y
803 RCOPY = xcopy /f /r /i /e /d /y
807 # filenames given to xsubpp must have forward slashes (since it puts
808 # full pathnames in #line strings)
809 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
850 EXTRACORE_SRC += perllib.c
852 .IF "$(PERL_MALLOC)" == "define"
853 EXTRACORE_SRC += ..\malloc.c
856 EXTRACORE_SRC += ..\perlio.c
863 # We need this for miniperl build unless we override canned
864 # config.h #define building mini\*
865 #.IF "$(USE_PERLIO)" == "define"
866 WIN32_SRC += .\win32io.c
869 .IF "$(CRYPT_SRC)" != ""
870 WIN32_SRC += .\$(CRYPT_SRC)
873 DLL_SRC = $(DYNALOADER).c
920 .\include\sys\socket.h \
923 CORE_H = $(CORE_NOCFG_H) .\config.h
925 UUDMAP_H = ..\uudmap.h
927 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
928 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
929 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
930 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
931 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
932 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
933 DLL_OBJ = $(DLL_SRC:db:+$(o))
934 X2P_OBJ = $(X2P_SRC:db:+$(o))
935 GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
937 PERLDLL_OBJ = $(CORE_OBJ)
938 PERLEXE_OBJ = perlmain$(o)
939 PERLEXEST_OBJ = perlmainst$(o)
941 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
943 .IF "$(USE_SETARGV)" != ""
944 SETARGV_OBJ = setargv$(o)
947 # specify static extensions here
948 #STATIC_EXT = Cwd Compress/Raw/Zlib
949 STATIC_EXT = Win32CORE
951 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
953 # vars must be separated by "\t+~\t+", since we're using the tempfile
954 # version of config_sh.pl (we were overflowing someone's buffer by
955 # trying to fit them all on the command line)
958 INST_DRV=$(INST_DRV) ~ \
959 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
960 INST_VER=$(INST_VER:s,\,$B,) ~ \
961 INST_ARCH=$(INST_ARCH) ~ \
962 archname=$(ARCHNAME) ~ \
965 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
966 cf_email=$(EMAIL) ~ \
967 d_crypt=$(D_CRYPT) ~ \
968 d_mymalloc=$(PERL_MALLOC) ~ \
969 libs=$(LIBFILES:f) ~ \
970 incpath=$(CCINCDIR:s,\,$B,) ~ \
971 libperl=$(PERLIMPLIB:f) ~ \
972 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
979 static_ext=$(STATIC_EXT) ~ \
980 usethreads=$(USE_ITHREADS) ~ \
981 useithreads=$(USE_ITHREADS) ~ \
982 usemultiplicity=$(USE_MULTI) ~ \
983 useperlio=$(USE_PERLIO) ~ \
984 uselargefiles=$(USE_LARGE_FILES) ~ \
985 usesitecustomize=$(USE_SITECUST) ~ \
986 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
990 # set up targets varying between Win95 and WinNT builds
993 .IF "$(IS_WIN95)" == "define"
995 RIGHTMAKE = __switch_makefiles
1001 .IMPORT .IGNORE : SystemRoot windir
1003 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
1004 ENV_OS=$(subst,OS=, $(shell @set OS))
1006 .IF "$(ENV_OS)" == "Windows_NT"
1007 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
1009 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
1016 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1017 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
1018 $(X2P) MakePPPort Extensions $(PERLSTATIC)
1020 ..\regnodes.h : ..\regcomp.sym
1021 cd .. && regcomp.pl && cd win32
1023 regnodes : ..\regnodes.h
1025 reonly : regnodes .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1026 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
1027 $(X2P) Extensions_reonly
1029 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
1031 static: $(PERLEXESTATIC)
1033 #----------------------------------------------------------------
1035 #-------------------- BEGIN Win95 SPECIFIC ----------------------
1037 # this target is a jump-off point for Win95
1038 # 1. it switches to the Win95-specific makefile if it exists
1039 # (__do_switch_makefiles)
1040 # 2. it prints a message when the Win95-specific one finishes (__done)
1041 # 3. it then kills this makefile by trying to make __no_such_target
1043 __switch_makefiles: __do_switch_makefiles __done __no_such_target
1045 __do_switch_makefiles:
1046 .IF "$(NOTFIRST)" != "true"
1047 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
1052 .IF "$(NOTFIRST)" != "true"
1054 @echo Build process complete. Ignore any errors after this message.
1055 @echo Run "dmake test" to test and "dmake install" to install
1058 # dummy targets for Win95-specific makefile
1068 # This target is used to generate the new makefile (.\makefile.95) for Win95
1070 .\makefile.95: .\makefile.mk
1071 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1073 #--------------------- END Win95 SPECIFIC ---------------------
1075 # a blank target for when builds don't need to do certain things
1076 # this target added for Win95 port but used to keep the WinNT port able to
1081 $(GLOBEXE) : perlglob$(o)
1082 .IF "$(CCTYPE)" == "BORLAND"
1083 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1084 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1085 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1086 .ELIF "$(CCTYPE)" == "GCC"
1087 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1089 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1090 perlglob$(o) setargv$(o)
1094 perlglob$(o) : perlglob.c
1096 config.w32 : $(CFGSH_TMPL)
1097 copy $(CFGSH_TMPL) config.w32
1099 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1101 copy $(CFGH_TMPL) config.h
1103 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1104 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1105 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1107 # this target is for when changes to the main config.sh happen
1108 # edit config.{b,v,g}c and make this target once for each supported
1109 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1111 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1112 $(CFGSH_TMPL) > ..\config.sh
1113 -cd .. && del /f perl.exe
1114 -cd .. && del /f perl*.dll
1115 cd .. && perl configpm
1116 -del /f $(CFGH_TMPL)
1118 -perl config_h.PL "INST_VER=$(INST_VER)"
1119 rename config.h $(CFGH_TMPL)
1121 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1122 cd .. && miniperl configpm
1123 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1124 $(XCOPY) ..\*.h $(COREDIR)\*.*
1125 $(XCOPY) *.h $(COREDIR)\*.*
1126 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1127 $(RCOPY) include $(COREDIR)\*.*
1128 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1129 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1131 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1132 .IF "$(CCTYPE)" == "BORLAND"
1133 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1134 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1135 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1136 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1137 .ELIF "$(CCTYPE)" == "GCC"
1138 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1139 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1141 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1142 @$(mktmp $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1147 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1149 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1150 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1152 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1153 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1155 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1156 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1157 # unless the .IF is true), so instead we use a .ELSE with the default.
1158 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1160 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1161 .IF "$(USE_IMP_SYS)" == "define"
1162 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1164 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1167 # 1. we don't want to rebuild miniperl.exe when config.h changes
1168 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1169 $(MINI_OBJ) : $(CORE_NOCFG_H)
1171 $(WIN32_OBJ) : $(CORE_H)
1173 $(CORE_OBJ) : $(CORE_H)
1175 $(DLL_OBJ) : $(CORE_H)
1177 $(X2P_OBJ) : $(CORE_H)
1179 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1180 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1181 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1182 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1184 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1185 .IF "$(CCTYPE)" == "BORLAND"
1186 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1187 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
1189 $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
1192 .ELIF "$(CCTYPE)" == "GCC"
1193 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1194 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1195 $(subst,\,$B $(shell @type Extensions_static)) \
1196 $(LIBFILES) $(LKPOST))
1197 dlltool --output-lib $(PERLIMPLIB) \
1198 --dllname $(PERLDLL:b).dll \
1200 --base-file perl.base \
1201 --output-exp perl.exp
1202 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1203 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1204 $(subst,\,$B $(shell @type Extensions_static)) \
1205 $(LIBFILES) perl.exp $(LKPOST))
1207 $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
1208 @Extensions_static \
1209 @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1210 $(PERLDLL_RES:s,\,$B,) $(PERLDLL_OBJ:s,\,$B,))
1213 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1215 $(PERLSTATICLIB): Extensions_static
1216 .IF "$(CCTYPE)" == "BORLAND"
1217 $(LIB32) $(LIB_FLAGS) $@ \
1218 @$(mktmp $(subst,\,$B $(shell @type Extensions_static)) \
1219 $(PERLDLL_OBJ:s,\,$B,))
1220 .ELIF "$(CCTYPE)" == "GCC"
1221 # XXX: It would be nice if MinGW's ar accepted a temporary file, but this
1222 # doesn't seem to work:
1223 # $(LIB32) $(LIB_FLAGS) $@ \
1224 # $(mktmp $(LKPRE) $(subst,\,$B $(shell @type Extensions_static)) \
1225 # $(PERLDLL_OBJ:s,\,$B,) $(LKPOST))
1226 $(LIB32) $(LIB_FLAGS) $@ \
1227 $(subst,\,$B $(shell @type Extensions_static)) \
1228 $(PERLDLL_OBJ:s,\,$B,)
1230 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1231 @$(mktmp $(PERLDLL_OBJ:s,\,$B,))
1233 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1235 $(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
1236 $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
1238 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1240 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1241 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1243 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1244 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1246 ..\x2p\hash$(o) : ..\x2p\hash.c
1247 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1249 ..\x2p\str$(o) : ..\x2p\str.c
1250 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1252 ..\x2p\util$(o) : ..\x2p\util.c
1253 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1255 ..\x2p\walk$(o) : ..\x2p\walk.c
1256 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1258 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1259 $(MINIPERL) ..\x2p\find2perl.PL
1260 $(MINIPERL) ..\x2p\s2p.PL
1261 .IF "$(CCTYPE)" == "BORLAND"
1262 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1263 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1264 .ELIF "$(CCTYPE)" == "GCC"
1265 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1266 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1268 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1269 @$(mktmp $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1273 $(MINIDIR)\globals$(o) : $(UUDMAP_H)
1275 $(UUDMAP_H) : $(GENUUDMAP)
1276 $(GENUUDMAP) >$(UUDMAP_H)
1278 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1279 .IF "$(CCTYPE)" == "BORLAND"
1280 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1281 @$(mktmp c0x32$(o) $(GENUUDMAP_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1282 .ELIF "$(CCTYPE)" == "GCC"
1283 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1284 $(mktmp $(LKPRE) $(GENUUDMAP_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1286 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1287 @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ:s,\,$B,))
1291 perlmain.c : runperl.c
1292 copy runperl.c perlmain.c
1294 perlmain$(o) : perlmain.c
1295 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1297 perlmainst.c : runperl.c
1298 copy runperl.c perlmainst.c
1300 perlmainst$(o) : perlmainst.c
1301 $(CC) $(CFLAGS_O) -DPERLDLL $(OBJOUT_FLAG)$@ -c perlmainst.c
1303 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1304 .IF "$(CCTYPE)" == "BORLAND"
1305 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1306 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
1308 $(PERLIMPLIB:s,\,$B,) $(LIBFILES),$N \
1309 $(PERLEXE_RES:s,\,$B,)$N)
1310 .ELIF "$(CCTYPE)" == "GCC"
1311 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1312 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1314 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1315 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1318 copy $(PERLEXE) $(WPERLEXE)
1319 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1320 copy splittree.pl ..
1321 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1323 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1324 .IF "$(CCTYPE)" == "BORLAND"
1325 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1326 @$(mktmp c0x32$(o) $(PERLEXEST_OBJ:s,\,$B,)$N \
1328 $(subst,\,$B $(shell @type Extensions_static)) \
1329 $(PERLSTATICLIB:s,\,$B,) $(LIBFILES),$N \
1330 $(PERLEXE_RES:s,\,$B,)$N)
1331 .ELIF "$(CCTYPE)" == "GCC"
1332 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1333 $(mktmp $(LKPRE) $(subst,\,$B $(shell @type Extensions_static)) \
1334 $(PERLSTATICLIB:s,\,$B,) $(LIBFILES) $(PERLEXEST_OBJ) \
1335 $(PERLEXE_RES:s,\,$B,) $(LKPOST))
1337 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1338 @Extensions_static $(PERLSTATICLIB) \
1339 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1343 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1344 if not exist $(AUTODIR) mkdir $(AUTODIR)
1345 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1346 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1347 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1348 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1349 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1350 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1352 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1353 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1355 MakePPPort: $(MINIPERL) $(CONFIGPM)
1356 $(MINIPERL) -I..\lib ..\mkppport
1359 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1361 #-------------------------------------------------------------------------------
1362 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1363 $(XCOPY) ..\*.h $(COREDIR)\*.*
1364 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1365 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1367 Extensions_reonly : buildext.pl $(PERLDEP) $(CONFIGPM)
1368 $(XCOPY) ..\*.h $(COREDIR)\*.*
1369 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1370 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1372 Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
1373 $(XCOPY) ..\*.h $(COREDIR)\*.*
1374 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1375 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1376 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1379 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1380 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1382 Extensions_realclean :
1383 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1384 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1386 #-------------------------------------------------------------------------------
1390 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1391 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1392 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1394 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1395 # so please check that script before making structural changes here
1396 utils: $(PERLEXE) $(X2P)
1397 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1398 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1399 copy ..\README.aix ..\pod\perlaix.pod
1400 copy ..\README.amiga ..\pod\perlamiga.pod
1401 copy ..\README.apollo ..\pod\perlapollo.pod
1402 copy ..\README.beos ..\pod\perlbeos.pod
1403 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1404 copy ..\README.ce ..\pod\perlce.pod
1405 copy ..\README.cn ..\pod\perlcn.pod
1406 copy ..\README.cygwin ..\pod\perlcygwin.pod
1407 copy ..\README.dgux ..\pod\perldgux.pod
1408 copy ..\README.dos ..\pod\perldos.pod
1409 copy ..\README.epoc ..\pod\perlepoc.pod
1410 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1411 copy ..\README.hpux ..\pod\perlhpux.pod
1412 copy ..\README.hurd ..\pod\perlhurd.pod
1413 copy ..\README.irix ..\pod\perlirix.pod
1414 copy ..\README.jp ..\pod\perljp.pod
1415 copy ..\README.ko ..\pod\perlko.pod
1416 copy ..\README.linux ..\pod\perllinux.pod
1417 copy ..\README.machten ..\pod\perlmachten.pod
1418 copy ..\README.macos ..\pod\perlmacos.pod
1419 copy ..\README.macosx ..\pod\perlmacosx.pod
1420 copy ..\README.mint ..\pod\perlmint.pod
1421 copy ..\README.mpeix ..\pod\perlmpeix.pod
1422 copy ..\README.netware ..\pod\perlnetware.pod
1423 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1424 copy ..\README.os2 ..\pod\perlos2.pod
1425 copy ..\README.os390 ..\pod\perlos390.pod
1426 copy ..\README.os400 ..\pod\perlos400.pod
1427 copy ..\README.plan9 ..\pod\perlplan9.pod
1428 copy ..\README.qnx ..\pod\perlqnx.pod
1429 copy ..\README.riscos ..\pod\perlriscos.pod
1430 copy ..\README.solaris ..\pod\perlsolaris.pod
1431 copy ..\README.symbian ..\pod\perlsymbian.pod
1432 copy ..\README.tru64 ..\pod\perltru64.pod
1433 copy ..\README.tw ..\pod\perltw.pod
1434 copy ..\README.uts ..\pod\perluts.pod
1435 copy ..\README.vmesa ..\pod\perlvmesa.pod
1436 copy ..\README.vms ..\pod\perlvms.pod
1437 copy ..\README.vos ..\pod\perlvos.pod
1438 copy ..\README.win32 ..\pod\perlwin32.pod
1439 copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
1440 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1441 cd ..\lib && $(PERLEXE) lib_pm.PL
1442 $(PERLEXE) $(PL2BAT) $(UTILS)
1444 # Note that the pod cleanup in this next section is parsed (and regenerated
1445 # by pod/buildtoc so please check that script before making changes here
1447 distclean: realclean
1448 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1449 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
1450 $(PERLEXESTATIC) $(PERLSTATICLIB)
1452 -del /f $(DYNALOADER).c
1453 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1454 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1455 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1456 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1457 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1458 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1459 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1460 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1461 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1462 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1463 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1464 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1465 -del /f $(LIBDIR)\Devel\PPPort.pm
1466 -del /f $(LIBDIR)\File\Glob.pm
1467 -del /f $(LIBDIR)\Storable.pm
1468 -del /f $(LIBDIR)\Digest\MD5.pm
1469 -del /f $(LIBDIR)\Digest\SHA.pm
1470 -del /f $(LIBDIR)\PerlIO\encoding.pm
1471 -del /f $(LIBDIR)\PerlIO\scalar.pm
1472 -del /f $(LIBDIR)\PerlIO\via.pm
1473 -del /f $(LIBDIR)\Sys\Hostname.pm
1474 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1475 -del /f $(LIBDIR)\threads\shared.pm
1476 -del /f $(LIBDIR)\Time\HiRes.pm
1477 -del /f $(LIBDIR)\Unicode\Normalize.pm
1478 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1479 -del /f $(LIBDIR)\Win32.pm
1480 -del /f $(LIBDIR)\Win32CORE.pm
1481 -del /f $(LIBDIR)\Win32API\File.pm
1482 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1483 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1484 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1485 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1486 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1487 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1488 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1489 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1490 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1491 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1492 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1493 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1494 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1495 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1496 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1497 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1498 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1499 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1500 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1501 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1502 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1503 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1504 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1505 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1506 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1507 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1508 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1509 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1510 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1512 pod2html pod2latex pod2man pod2text pod2usage \
1513 podchecker podselect
1514 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1515 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1516 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1517 -cd ..\x2p && del /f find2perl s2p psed *.bat
1518 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1523 -del /f $(PERLEXE_ICO) perl.base
1524 ren ..\lib\Net\Changes.libnet Changes.tenbil
1525 ren ..\lib\Net\README.libnet README.tenbil
1526 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1527 ren ..\lib\Net\Changes.tenbil Changes.libnet
1528 ren ..\lib\Net\README.tenbil README.libnet
1529 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1530 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1531 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1532 -if exist pod2htmd.tmp del pod2htmd.tmp
1533 -if exist pod2htmi.tmp del pod2htmi.tmp
1534 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1536 install : all installbare installhtml
1538 installbare : $(RIGHTMAKE) utils
1539 $(PERLEXE) ..\installperl
1540 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1541 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1542 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1543 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1544 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1545 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1548 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1550 inst_lib : $(CONFIGPM)
1551 copy splittree.pl ..
1552 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1553 $(RCOPY) ..\lib $(INST_LIB)\*.*
1555 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1556 cd ..\lib\unicore && \
1557 ..\$(MINIPERL) -I.. mktables
1559 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1560 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1561 if exist ..\t\perl.exe del /f ..\t\perl.exe
1562 rename ..\t\miniperl.exe perl.exe
1563 .IF "$(CCTYPE)" == "BORLAND"
1564 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1566 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1570 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1573 $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
1575 cleanup_unpacked_files:
1576 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
1578 test-prep : all utils unpack_files
1579 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1580 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1581 .IF "$(CCTYPE)" == "BORLAND"
1582 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1584 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1587 test : $(RIGHTMAKE) test-prep
1588 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1590 test-reonly : reonly utils
1591 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1592 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1593 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1595 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA) && \
1599 cd .. && regen.pl && cd win32
1601 test-notty : test-prep
1602 set PERL_SKIP_TTY_TEST=1 && \
1603 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1605 _test : $(RIGHTMAKE)
1606 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1607 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1608 .IF "$(CCTYPE)" == "BORLAND"
1609 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1611 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1613 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1616 -@erase miniperlmain$(o)
1618 -@erase perlglob$(o)
1619 -@erase perlmain$(o)
1620 -@erase perlmainst$(o)
1626 -@erase $(PERLEXESTATIC)
1627 -@erase $(PERLSTATICLIB)
1630 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H)
1631 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1632 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1633 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1634 -@erase $(UNIDATAFILES)
1635 -@erase $(WIN32_OBJ)
1638 ren ..\lib\Net\Changes.libnet Changes.tenbil
1639 ren ..\lib\Net\README.libnet README.tenbil
1640 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1641 ren ..\lib\Net\Changes.tenbil Changes.libnet
1642 ren ..\lib\Net\README.tenbil README.libnet
1643 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1644 -@erase ..\x2p\*.exe ..\x2p\*.bat
1648 -@erase Extensions_static
1652 _preclean : cleanup_unpacked_files
1654 clean : _preclean Extensions_clean _clean
1656 realclean : _preclean Extensions_realclean MakePPPort_clean _clean
1658 # Handy way to run perlbug -ok without having to install and run the
1659 # installed perlbug. We don't re-run the tests here - we trust the user.
1660 # Please *don't* use this unless all tests pass.
1661 # If you want to report test failures, use "dmake nok" instead.
1663 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1666 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1669 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1672 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok