2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # Comment this out if you don't want to enable large file support for
80 # some reason. Should normally only be changed to maintain compatibility
81 # with an older release of perl.
82 USE_LARGE_FILES *= define
85 # uncomment exactly one of the following
89 # Visual C++ > 2.x and < 6.x
93 # Borland 5.02 or later
95 # MinGW with gcc-2.95.2 or later
99 # uncomment this if your Borland compiler is older than v5.4.
102 # uncomment this if you want to use Borland's VCL as your CRT
106 # uncomment this if you are compiling under Windows 95/98 and command.com
107 # (not needed if you're running under 4DOS/NT 6.01 or later)
111 # uncomment next line if you want debug version of perl (big,slow)
112 # If not enabled, we automatically try to use maximum optimization
113 # with all compilers that are known to have a working optimizer.
118 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
119 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
120 # This currently requires VC 5.0 with Service Pack 3 or later.
121 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
122 # and follow the directions in the package to install.
124 # Not recommended if you have VC 6.x and you're not running Windows 9x.
126 #USE_PERLCRT *= define
129 # uncomment to enable linking with setargv.obj under the Visual C
130 # compiler. Setting this options enables perl to expand wildcards in
131 # arguments, but it may be harder to use alternate methods like
132 # File::DosGlob that are more powerful. This option is supported only with
135 #USE_SETARGV *= define
138 # if you want to have the crypt() builtin function implemented, leave this or
139 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
140 # version of des_fcrypt().
142 CRYPT_SRC *= fcrypt.c
145 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
146 # library, uncomment this, and make sure the library exists (see README.win32)
147 # Specify the full pathname of the library.
149 #CRYPT_LIB *= fcrypt.lib
152 # set this if you wish to use perl's malloc
153 # WARNING: Turning this on/off WILL break binary compatibility with extensions
154 # you may have compiled with/without it. Be prepared to recompile all
155 # extensions if you change the default. Currently, this cannot be enabled
156 # if you ask for USE_IMP_SYS above.
158 #PERL_MALLOC *= define
161 # set the install locations of the compiler include/libraries
162 # Running VCVARS32.BAT is *required* when using Visual C.
163 # Some versions of Visual C don't define MSVCDIR in the environment,
164 # so you may have to set CCHOME explicitly (spaces in the path name should
167 .IF "$(CCTYPE)" == "BORLAND"
168 CCHOME *= C:\borland\bcc55
169 .ELIF "$(CCTYPE)" == "GCC"
174 CCINCDIR *= $(CCHOME)\include
175 CCLIBDIR *= $(CCHOME)\lib
178 # Additional compiler flags can be specified here.
182 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
183 # for old symbols by default, at the expense of extreme pollution. You most
184 # probably just want to build modules that won't compile with
185 # perl Makefile.PL POLLUTE=1
186 # instead of enabling this. Please report such modules to the respective
189 #BUILDOPT += -DPERL_POLLUTE
192 # This should normally be disabled. Enabling it will disable the File::Glob
193 # implementation of CORE::glob.
195 #BUILDOPT += -DPERL_EXTERNAL_GLOB
198 # This should normally be disabled. Enabling it causes perl to read scripts
199 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
200 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
203 # specify semicolon-separated list of extra directories that modules will
204 # look for libraries (spaces in path names need not be quoted)
209 # set this to point to cmd.exe (only needed if you use some
210 # alternate shell that doesn't grok cmd.exe style commands)
212 #SHELL *= g:\winnt\system32\cmd.exe
215 # set this to your email address (perl will guess a value from
216 # from your loginname and your hostname, which may not be right)
221 ## Build configuration ends.
224 ##################### CHANGE THESE ONLY IF YOU MUST #####################
226 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
230 CRYPT_FLAG = -DHAVE_DES_FCRYPT
236 USE_ITHREADS *= undef
239 USE_LARGE_FILES *= undef
242 .IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
246 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
250 .IF "$(USE_MULTI)" != "undef"
251 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
254 .IF "$(USE_IMP_SYS)" != "undef"
255 BUILDOPT += -DPERL_IMPLICIT_SYS
258 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
260 PROCESSOR_ARCHITECTURE *= x86
263 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
264 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
266 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
273 .IF "$(USE_MULTI)" == "define"
274 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
276 .IF "$(USE_PERLIO)" == "define"
277 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
279 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
281 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
284 .IF "$(USE_ITHREADS)" == "define"
285 ARCHNAME !:= $(ARCHNAME)-thread
288 # Visual Studio 98 specific
289 .IF "$(CCTYPE)" == "MSVC60"
291 # VC 6.0 can load the socket dll on demand. Makes the test suite
292 # run in about 10% less time.
293 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
295 .IF "$(CFG)" == "Debug"
297 # VC 6.0 seems capable of compiling perl correctly with optimizations
298 # enabled. Anything earlier fails tests.
303 ARCHDIR = ..\lib\$(ARCHNAME)
304 COREDIR = ..\lib\CORE
305 AUTODIR = ..\lib\auto
309 EXTUTILSDIR = $(LIBDIR)\ExtUtils
312 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
313 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
314 INST_LIB = $(INST_TOP)$(INST_VER)\lib
315 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
316 INST_COREDIR = $(INST_ARCHLIB)\CORE
317 INST_POD = $(INST_LIB)\pod
318 INST_HTML = $(INST_TOP)$(INST_VER)\html
321 # Programs to compile, build .lib files and link
326 .IF "$(CCTYPE)" == "BORLAND"
329 .IF "$(BCCOLD)" != "define"
341 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
342 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
343 DEFINES = -DWIN32 $(CRYPT_FLAG)
344 LOCDEFS = -DPERLDLL -DPERL_CORE
349 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
351 .IF "$(CFG)" == "Debug"
352 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
355 OPTIMIZE = -O2 -D_RTLDLL
359 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
360 $(PCHFLAGS) $(OPTIMIZE)
361 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
365 .IF "$(BCCOLD)" != "define"
367 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
369 .IF "$(BCCVCL)" == "define"
370 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
371 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
375 .ELIF "$(CCTYPE)" == "GCC"
391 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
392 DEFINES = -DWIN32 $(CRYPT_FLAG)
393 LOCDEFS = -DPERLDLL -DPERL_CORE
400 LIBFILES = $(CRYPT_LIB) $(LIBC) \
401 -lmoldname -lkernel32 -luser32 -lgdi32 \
402 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
403 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
404 -lwinmm -lversion -lodbc32
406 .IF "$(CFG)" == "Debug"
407 OPTIMIZE = -g -O2 -DDEBUGGING
414 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
415 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
420 # NOTE: we assume that GCC uses MSVCRT.DLL
421 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
427 LIB32 = $(LINK32) -lib
434 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
435 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
436 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
437 LOCDEFS = -DPERLDLL -DPERL_CORE
441 .IF "$(USE_PERLCRT)" != "define"
447 .IF "$(CFG)" == "Debug"
448 .IF "$(CCTYPE)" == "MSVC20"
449 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
451 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
455 OPTIMIZE = -MD -Zi -DNDEBUG
456 # we enable debug symbols in release builds also
457 LINK_DBG = -debug -opt:ref,icf
458 # you may want to enable this if you want COFF symbols in the executables
459 # in addition to the PDB symbols. The default Dr. Watson that ships with
460 # Windows can use the the former but not latter. The free WinDbg can be
461 # installed to get better stack traces from just the PDB symbols, so we
462 # avoid the bloat of COFF symbols by default.
463 #LINK_DBG = $(LINK_DBG) -debugtype:both
464 .IF "$(WIN64)" == "define"
465 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
469 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
475 .IF "$(WIN64)" == "define"
476 DEFINES += -DWIN64 -DCONSERVATIVE
477 OPTIMIZE += -Wp64 -Op
480 .IF "$(USE_PERLCRT)" != "define"
481 BUILDOPT += -DPERL_MSVCRT_READFIX
484 LIBBASEFILES = $(CRYPT_LIB) \
485 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
486 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
487 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
490 # win64 doesn't have some libs
491 .IF "$(WIN64)" != "define"
492 LIBBASEFILES += odbc32.lib odbccp32.lib
495 # we add LIBC here, since we may be using PerlCRT.dll
496 LIBFILES = $(LIBBASEFILES) $(LIBC)
498 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
499 $(PCHFLAGS) $(OPTIMIZE)
500 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
501 -libpath:"$(INST_COREDIR)" \
502 -machine:$(PROCESSOR_ARCHITECTURE)
509 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
511 # used to allow local linking flags that are not propogated into Config.pm,
515 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
517 #################### do not edit below this line #######################
518 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
530 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
533 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
536 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
542 .IF "$(CCTYPE)" == "BORLAND"
543 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
544 $(IMPLIB) $(*B).lib $@
545 .ELIF "$(CCTYPE)" == "GCC"
546 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
547 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
549 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
550 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
554 .IF "$(CCTYPE)" == "GCC"
555 $(RSC) --use-temp-file -i $< -o $@
562 MINIPERL = ..\miniperl.exe
564 PERLEXE = ..\perl.exe
565 WPERLEXE = ..\wperl.exe
566 GLOBEXE = ..\perlglob.exe
567 CONFIGPM = ..\lib\Config.pm
568 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
571 # Unicode data files generated by mktables
572 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
573 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
574 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
575 ..\lib\unicore\PVA.pl
577 # Directories of Unicode data files generated by mktables
578 UNIDATADIR1 = ..\lib\unicore\To
579 UNIDATADIR2 = ..\lib\unicore\lib
581 PERLEXE_ICO = .\perlexe.ico
582 PERLEXE_RES = .\perlexe.res
585 # Nominate a target which causes extensions to be re-built
586 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
587 # on and really only the interface - i.e. the .def file used to export symbols
589 PERLDEP = perldll.def
592 PL2BAT = bin\pl2bat.pl
593 GLOBBAT = bin\perlglob.bat
631 .IF "$(CCTYPE)" == "BORLAND"
633 CFGSH_TMPL = config.bc
634 CFGH_TMPL = config_H.bc
636 .ELIF "$(CCTYPE)" == "GCC"
638 CFGSH_TMPL = config.gc
639 CFGH_TMPL = config_H.gc
640 PERLIMPLIB = ..\libperl59$(a)
644 .IF "$(WIN64)" == "define"
645 CFGSH_TMPL = config.vc64
646 CFGH_TMPL = config_H.vc64
648 CFGSH_TMPL = config.vc
649 CFGH_TMPL = config_H.vc
654 # makedef.pl must be updated if this changes, and this should normally
655 # only change when there is an incompatible revision of the public API.
656 PERLIMPLIB *= ..\perl59$(a)
657 PERLDLL = ..\perl59.dll
659 XCOPY = xcopy /f /r /i /d
660 RCOPY = xcopy /f /r /i /e /d
664 # filenames given to xsubpp must have forward slashes (since it puts
665 # full pathnames in #line strings)
666 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
705 EXTRACORE_SRC += perllib.c
707 .IF "$(PERL_MALLOC)" == "define"
708 EXTRACORE_SRC += ..\malloc.c
711 EXTRACORE_SRC += ..\perlio.c
718 # We need this for miniperl build unless we override canned
719 # config.h #define building mini\*
720 #.IF "$(USE_PERLIO)" == "define"
721 WIN32_SRC += .\win32io.c
724 .IF "$(CRYPT_SRC)" != ""
725 WIN32_SRC += .\$(CRYPT_SRC)
728 DLL_SRC = $(DYNALOADER).c
774 .\include\sys\socket.h \
777 CORE_H = $(CORE_NOCFG_H) .\config.h
779 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
780 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
781 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
782 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
783 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
784 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
785 DLL_OBJ = $(DLL_SRC:db:+$(o))
786 X2P_OBJ = $(X2P_SRC:db:+$(o))
788 PERLDLL_OBJ = $(CORE_OBJ)
789 PERLEXE_OBJ = perlmain$(o)
791 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
793 .IF "$(USE_SETARGV)" != ""
794 SETARGV_OBJ = setargv$(o)
797 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
798 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
799 Sys/Hostname Storable Filter/Util/Call Encode \
800 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
801 Unicode/Normalize Win32
802 STATIC_EXT = DynaLoader
805 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
807 POD2HTML = $(PODDIR)\pod2html
808 POD2MAN = $(PODDIR)\pod2man
809 POD2LATEX = $(PODDIR)\pod2latex
810 POD2TEXT = $(PODDIR)\pod2text
812 # vars must be separated by "\t+~\t+", since we're using the tempfile
813 # version of config_sh.pl (we were overflowing someone's buffer by
814 # trying to fit them all on the command line)
817 INST_DRV=$(INST_DRV) ~ \
818 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
819 INST_VER=$(INST_VER:s/\/\\/) ~ \
820 INST_ARCH=$(INST_ARCH) ~ \
821 archname=$(ARCHNAME) ~ \
824 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
825 cf_email=$(EMAIL) ~ \
826 d_crypt=$(D_CRYPT) ~ \
827 d_mymalloc=$(PERL_MALLOC) ~ \
828 libs=$(LIBFILES:f) ~ \
829 incpath=$(CCINCDIR:s/\/\\/) ~ \
830 libperl=$(PERLIMPLIB:f) ~ \
831 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
838 static_ext=$(STATIC_EXT) ~ \
839 usethreads=$(USE_ITHREADS) ~ \
840 useithreads=$(USE_ITHREADS) ~ \
841 usemultiplicity=$(USE_MULTI) ~ \
842 useperlio=$(USE_PERLIO) ~ \
843 uselargefiles=$(USE_LARGE_FILES) ~ \
844 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
848 # set up targets varying between Win95 and WinNT builds
851 .IF "$(IS_WIN95)" == "define"
853 RIGHTMAKE = __switch_makefiles
864 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
865 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
868 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
870 #----------------------------------------------------------------
872 #-------------------- BEGIN Win95 SPECIFIC ----------------------
874 # this target is a jump-off point for Win95
875 # 1. it switches to the Win95-specific makefile if it exists
876 # (__do_switch_makefiles)
877 # 2. it prints a message when the Win95-specific one finishes (__done)
878 # 3. it then kills this makefile by trying to make __no_such_target
880 __switch_makefiles: __do_switch_makefiles __done __no_such_target
882 __do_switch_makefiles:
883 .IF "$(NOTFIRST)" != "true"
884 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
889 .IF "$(NOTFIRST)" != "true"
891 @echo Build process complete. Ignore any errors after this message.
892 @echo Run "dmake test" to test and "dmake install" to install
895 # dummy targets for Win95-specific makefile
905 # This target is used to generate the new makefile (.\makefile.95) for Win95
907 .\makefile.95: .\makefile.mk
908 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
910 #--------------------- END Win95 SPECIFIC ---------------------
912 # a blank target for when builds don't need to do certain things
913 # this target added for Win95 port but used to keep the WinNT port able to
918 $(GLOBEXE) : perlglob$(o)
919 .IF "$(CCTYPE)" == "BORLAND"
920 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
921 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
922 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
923 .ELIF "$(CCTYPE)" == "GCC"
924 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
926 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
927 perlglob$(o) setargv$(o)
930 perlglob$(o) : perlglob.c
932 config.w32 : $(CFGSH_TMPL)
933 copy $(CFGSH_TMPL) config.w32
935 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
937 copy $(CFGH_TMPL) config.h
939 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
940 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
941 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
943 # this target is for when changes to the main config.sh happen
944 # edit config.{b,v,g}c and make this target once for each supported
945 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
947 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
948 $(CFGSH_TMPL) > ..\config.sh
949 -cd .. && del /f perl.exe
950 -cd .. && del /f perl*.dll
951 cd .. && perl configpm
954 -perl config_h.PL "INST_VER=$(INST_VER)"
955 rename config.h $(CFGH_TMPL)
957 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
958 cd .. && miniperl configpm
959 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
960 $(XCOPY) ..\*.h $(COREDIR)\*.*
961 $(XCOPY) *.h $(COREDIR)\*.*
962 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
963 $(RCOPY) include $(COREDIR)\*.*
964 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
965 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
967 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
968 .IF "$(CCTYPE)" == "BORLAND"
969 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
970 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
971 .ELIF "$(CCTYPE)" == "GCC"
972 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
973 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
975 $(LINK32) -subsystem:console -out:$@ \
976 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
980 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
982 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
983 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
985 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
986 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
988 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
989 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
990 # unless the .IF is true), so instead we use a .ELSE with the default.
991 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
993 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
994 .IF "$(USE_IMP_SYS)" == "define"
995 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
997 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1000 # 1. we don't want to rebuild miniperl.exe when config.h changes
1001 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1002 $(MINI_OBJ) : $(CORE_NOCFG_H)
1004 $(WIN32_OBJ) : $(CORE_H)
1006 $(CORE_OBJ) : $(CORE_H)
1008 $(DLL_OBJ) : $(CORE_H)
1010 $(X2P_OBJ) : $(CORE_H)
1012 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1013 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h $(STATIC_EXT)
1014 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1015 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1017 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1018 .IF "$(CCTYPE)" == "BORLAND"
1019 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1020 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1025 .ELIF "$(CCTYPE)" == "GCC"
1026 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1027 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1028 dlltool --output-lib $(PERLIMPLIB) \
1029 --dllname $(PERLDLL:b).dll \
1031 --base-file perl.base \
1032 --output-exp perl.exp
1033 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1034 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1037 $(LINK32) -dll -def:perldll.def -out:$@ \
1038 -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1039 $(foreach,i,$(shell $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --list-static-libs) \
1041 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\)
1043 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1046 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1047 $(MINIPERL) makeico.pl > $@
1049 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1051 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1052 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1054 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1055 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1057 ..\x2p\hash$(o) : ..\x2p\hash.c
1058 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1060 ..\x2p\str$(o) : ..\x2p\str.c
1061 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1063 ..\x2p\util$(o) : ..\x2p\util.c
1064 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1066 ..\x2p\walk$(o) : ..\x2p\walk.c
1067 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1069 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1070 $(MINIPERL) ..\x2p\find2perl.PL
1071 $(MINIPERL) ..\x2p\s2p.PL
1072 .IF "$(CCTYPE)" == "BORLAND"
1073 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1074 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1075 .ELIF "$(CCTYPE)" == "GCC"
1076 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1077 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1079 $(LINK32) -subsystem:console -out:$@ \
1080 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1083 perlmain.c : runperl.c
1084 copy runperl.c perlmain.c
1086 perlmain$(o) : perlmain.c
1087 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1089 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1090 .IF "$(CCTYPE)" == "BORLAND"
1091 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1092 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1094 $(PERLIMPLIB) $(LIBFILES)\n)
1095 .ELIF "$(CCTYPE)" == "GCC"
1096 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1097 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1099 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1100 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1102 copy $(PERLEXE) $(WPERLEXE)
1103 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1104 copy splittree.pl ..
1105 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1107 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1108 if not exist $(AUTODIR) mkdir $(AUTODIR)
1109 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1110 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1111 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1112 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1113 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1114 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1116 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1117 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1119 #----------------------------------------------------------------------------------
1120 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1121 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1122 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1124 Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
1125 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1126 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1128 # Note: The next two targets explicitly remove a "blibdirs.exists" file that
1129 # currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
1132 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1133 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1134 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
1136 Extensions_realclean :
1137 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1138 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1139 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
1141 #----------------------------------------------------------------------------------
1145 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1146 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1147 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1149 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1150 # so please check that script before making structural changes here
1151 utils: $(PERLEXE) $(X2P)
1152 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1153 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1154 copy ..\README.aix ..\pod\perlaix.pod
1155 copy ..\README.amiga ..\pod\perlamiga.pod
1156 copy ..\README.apollo ..\pod\perlapollo.pod
1157 copy ..\README.beos ..\pod\perlbeos.pod
1158 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1159 copy ..\README.ce ..\pod\perlce.pod
1160 copy ..\README.cn ..\pod\perlcn.pod
1161 copy ..\README.cygwin ..\pod\perlcygwin.pod
1162 copy ..\README.dgux ..\pod\perldgux.pod
1163 copy ..\README.dos ..\pod\perldos.pod
1164 copy ..\README.epoc ..\pod\perlepoc.pod
1165 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1166 copy ..\README.hpux ..\pod\perlhpux.pod
1167 copy ..\README.hurd ..\pod\perlhurd.pod
1168 copy ..\README.irix ..\pod\perlirix.pod
1169 copy ..\README.jp ..\pod\perljp.pod
1170 copy ..\README.ko ..\pod\perlko.pod
1171 copy ..\README.machten ..\pod\perlmachten.pod
1172 copy ..\README.macos ..\pod\perlmacos.pod
1173 copy ..\README.macosx ..\pod\perlmacosx.pod
1174 copy ..\README.mint ..\pod\perlmint.pod
1175 copy ..\README.mpeix ..\pod\perlmpeix.pod
1176 copy ..\README.netware ..\pod\perlnetware.pod
1177 copy ..\README.os2 ..\pod\perlos2.pod
1178 copy ..\README.os390 ..\pod\perlos390.pod
1179 copy ..\README.os400 ..\pod\perlos400.pod
1180 copy ..\README.plan9 ..\pod\perlplan9.pod
1181 copy ..\README.qnx ..\pod\perlqnx.pod
1182 copy ..\README.solaris ..\pod\perlsolaris.pod
1183 copy ..\README.tru64 ..\pod\perltru64.pod
1184 copy ..\README.tw ..\pod\perltw.pod
1185 copy ..\README.uts ..\pod\perluts.pod
1186 copy ..\README.vmesa ..\pod\perlvmesa.pod
1187 copy ..\README.vms ..\pod\perlvms.pod
1188 copy ..\README.vos ..\pod\perlvos.pod
1189 copy ..\README.win32 ..\pod\perlwin32.pod
1190 copy ..\pod\perl592delta.pod ..\pod\perldelta.pod
1191 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1192 cd ..\lib && $(PERLEXE) lib_pm.PL
1193 $(PERLEXE) $(PL2BAT) $(UTILS)
1195 # Note that the pod cleanup in this next section is parsed (and regenerated
1196 # by pod/buildtoc so please check that script before making changes here
1198 # the doubled rmdir calls are needed because older cmd shells
1199 # don't understand /q
1200 distclean: realclean
1201 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1202 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1204 -del /f $(DYNALOADER).c
1205 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1206 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1207 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1208 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1209 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1210 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1211 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1212 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1213 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1214 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1215 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1216 -del /f $(LIBDIR)\ByteLoader.pm
1217 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1218 -del /f $(LIBDIR)\Devel\PPPort.pm
1219 -del /f $(LIBDIR)\File\Glob.pm
1220 -del /f $(LIBDIR)\Storable.pm
1221 -del /f $(LIBDIR)\Digest\MD5.pm
1222 -del /f $(LIBDIR)\PerlIO\encoding.pm
1223 -del /f $(LIBDIR)\PerlIO\scalar.pm
1224 -del /f $(LIBDIR)\PerlIO\via.pm
1225 -del /f $(LIBDIR)\Sys\Hostname.pm
1226 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1227 -del /f $(LIBDIR)\threads\shared.pm
1228 -del /f $(LIBDIR)\Time\HiRes.pm
1229 -del /f $(LIBDIR)\Unicode\Normalize.pm
1230 -del /f $(LIBDIR)\Win32.pm
1231 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1232 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1233 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1234 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1235 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1236 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1237 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1238 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1239 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1240 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1241 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1242 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1243 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1244 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1245 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1246 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1247 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1248 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1249 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1250 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1251 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1252 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1253 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1254 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1255 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1256 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1257 perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
1258 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1260 pod2html pod2latex pod2man pod2text pod2usage \
1261 podchecker podselect
1262 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1263 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1264 xsubpp instmodsh prove
1265 -cd ..\x2p && del /f find2perl s2p psed *.bat
1266 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1270 -del /f $(PERLEXE_ICO) perl.base
1271 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1272 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1273 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1274 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1275 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1276 -if exist $(COREDIR) rmdir /s $(COREDIR)
1278 install : all installbare installhtml
1280 installbare : $(RIGHTMAKE) utils
1281 $(PERLEXE) ..\installperl
1282 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1283 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1284 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1285 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1286 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1289 $(RCOPY) html\*.* $(INST_HTML)\*.*
1291 inst_lib : $(CONFIGPM)
1292 copy splittree.pl ..
1293 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1294 $(RCOPY) ..\lib $(INST_LIB)\*.*
1296 # Move the rule for making $(UNIDATAFILES) into a separate target and leave the
1297 # actual rule here blank because dmake runs the rule here once for each of the
1298 # files listed in $(UNIDATAFILES)
1299 $(UNIDATAFILES) : make_unidatafiles
1301 make_unidatafiles : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1302 cd ..\lib\unicore && \
1303 ..\$(MINIPERL) -I.. mktables
1305 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1306 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1307 if exist ..\t\perl.exe del /f ..\t\perl.exe
1308 rename ..\t\miniperl.exe perl.exe
1309 .IF "$(CCTYPE)" == "BORLAND"
1310 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1312 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1316 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1318 test-prep : all utils
1319 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1320 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1321 .IF "$(CCTYPE)" == "BORLAND"
1322 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1324 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1327 test : $(RIGHTMAKE) test-prep
1328 cd ..\t && $(PERLEXE) -I..\lib harness
1330 test-notty : test-prep
1331 set PERL_SKIP_TTY_TEST=1 && \
1332 cd ..\t && $(PERLEXE) -I.\lib harness
1334 _test : $(RIGHTMAKE)
1335 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1336 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1337 .IF "$(CCTYPE)" == "BORLAND"
1338 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1340 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1342 cd ..\t && $(PERLEXE) -I..\lib harness
1344 # the doubled rmdir calls are needed because older cmd shells
1345 # don't understand /q
1347 -@erase miniperlmain$(o)
1349 -@erase perlglob$(o)
1350 -@erase perlmain$(o)
1358 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1359 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1360 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1361 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1362 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1363 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1364 -@erase $(UNIDATAFILES)
1365 -@erase $(WIN32_OBJ)
1368 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1369 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1370 -@erase ..\x2p\*.exe ..\x2p\*.bat
1374 clean : Extensions_clean _clean
1376 realclean : Extensions_realclean _clean
1378 # Handy way to run perlbug -ok without having to install and run the
1379 # installed perlbug. We don't re-run the tests here - we trust the user.
1380 # Please *don't* use this unless all tests pass.
1381 # If you want to report test failures, use "dmake nok" instead.
1383 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1386 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1389 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1392 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok