2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # uncomment exactly one of the following
83 # Visual C++ > 2.x and < 6.x
87 # Borland 5.02 or later
89 # mingw32+gcc-2.95.2 or better
91 # Uncomment this if you are using the latest MinGW release (2.0.0)
93 #USE_GCC_V3_2 *= define
96 # uncomment this if your Borland compiler is older than v5.4.
99 # uncomment this if you want to use Borland's VCL as your CRT
103 # uncomment this if you are compiling under Windows 95/98 and command.com
104 # (not needed if you're running under 4DOS/NT 6.01 or later)
108 # uncomment next line if you want debug version of perl (big,slow)
109 # If not enabled, we automatically try to use maximum optimization
110 # with all compilers that are known to have a working optimizer.
115 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
116 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
117 # This currently requires VC 5.0 with Service Pack 3 or later.
118 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
119 # and follow the directions in the package to install.
121 # Not recommended if you have VC 6.x and you're not running Windows 9x.
123 #USE_PERLCRT *= define
126 # uncomment to enable linking with setargv.obj under the Visual C
127 # compiler. Setting this options enables perl to expand wildcards in
128 # arguments, but it may be harder to use alternate methods like
129 # File::DosGlob that are more powerful. This option is supported only with
132 #USE_SETARGV *= define
135 # if you have the source for des_fcrypt(), uncomment this and make sure the
136 # file exists (see README.win32). File should be located in the same
137 # directory as this file.
139 #CRYPT_SRC *= fcrypt.c
142 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
143 # library, uncomment this, and make sure the library exists (see README.win32)
144 # Specify the full pathname of the library.
146 #CRYPT_LIB *= fcrypt.lib
149 # set this if you wish to use perl's malloc
150 # WARNING: Turning this on/off WILL break binary compatibility with extensions
151 # you may have compiled with/without it. Be prepared to recompile all
152 # extensions if you change the default. Currently, this cannot be enabled
153 # if you ask for USE_IMP_SYS above.
155 #PERL_MALLOC *= define
158 # set the install locations of the compiler include/libraries
159 # Running VCVARS32.BAT is *required* when using Visual C.
160 # Some versions of Visual C don't define MSVCDIR in the environment,
161 # so you may have to set CCHOME explicitly (spaces in the path name should
164 .IF "$(CCTYPE)" == "BORLAND"
165 CCHOME *= C:\borland\bcc55
166 .ELIF "$(CCTYPE)" == "GCC"
171 CCINCDIR *= $(CCHOME)\include
172 CCLIBDIR *= $(CCHOME)\lib
175 # Additional compiler flags can be specified here.
179 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
180 # for old symbols by default, at the expense of extreme pollution. You most
181 # probably just want to build modules that won't compile with
182 # perl Makefile.PL POLLUTE=1
183 # instead of enabling this. Please report such modules to the respective
186 #BUILDOPT += -DPERL_POLLUTE
189 # This should normally be disabled. Enabling it will disable the File::Glob
190 # implementation of CORE::glob.
192 #BUILDOPT += -DPERL_EXTERNAL_GLOB
195 # This should normally be disabled. Enabling it causes perl to read scripts
196 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
197 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
200 # specify semicolon-separated list of extra directories that modules will
201 # look for libraries (spaces in path names need not be quoted)
206 # set this to point to cmd.exe (only needed if you use some
207 # alternate shell that doesn't grok cmd.exe style commands)
209 #SHELL *= g:\winnt\system32\cmd.exe
212 # set this to your email address (perl will guess a value from
213 # from your loginname and your hostname, which may not be right)
218 ## Build configuration ends.
221 ##################### CHANGE THESE ONLY IF YOU MUST #####################
223 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
227 CRYPT_FLAG = -DHAVE_DES_FCRYPT
233 USE_ITHREADS *= undef
238 .IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
242 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
246 .IF "$(USE_MULTI)" != "undef"
247 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
250 .IF "$(USE_IMP_SYS)" != "undef"
251 BUILDOPT += -DPERL_IMPLICIT_SYS
254 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
256 PROCESSOR_ARCHITECTURE *= x86
259 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
260 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
262 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
269 .IF "$(USE_MULTI)" == "define"
270 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
272 .IF "$(USE_PERLIO)" == "define"
273 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
275 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
277 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
280 .IF "$(USE_ITHREADS)" == "define"
281 ARCHNAME !:= $(ARCHNAME)-thread
284 # Visual Studio 98 specific
285 .IF "$(CCTYPE)" == "MSVC60"
287 # VC 6.0 can load the socket dll on demand. Makes the test suite
288 # run in about 10% less time.
289 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
291 .IF "$(CFG)" == "Debug"
293 # VC 6.0 seems capable of compiling perl correctly with optimizations
294 # enabled. Anything earlier fails tests.
299 ARCHDIR = ..\lib\$(ARCHNAME)
300 COREDIR = ..\lib\CORE
301 AUTODIR = ..\lib\auto
305 EXTUTILSDIR = $(LIBDIR)\ExtUtils
308 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
309 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
310 INST_LIB = $(INST_TOP)$(INST_VER)\lib
311 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
312 INST_COREDIR = $(INST_ARCHLIB)\CORE
313 INST_POD = $(INST_LIB)\pod
314 INST_HTML = $(INST_TOP)$(INST_VER)\html
317 # Programs to compile, build .lib files and link
322 .IF "$(CCTYPE)" == "BORLAND"
325 .IF "$(BCCOLD)" != "define"
337 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
338 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
339 DEFINES = -DWIN32 $(CRYPT_FLAG)
340 LOCDEFS = -DPERLDLL -DPERL_CORE
345 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
347 .IF "$(CFG)" == "Debug"
348 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
351 OPTIMIZE = -O2 -D_RTLDLL
355 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
356 $(PCHFLAGS) $(OPTIMIZE)
357 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
361 .IF "$(BCCOLD)" != "define"
363 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
365 .IF "$(BCCVCL)" == "define"
366 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
367 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
371 .ELIF "$(CCTYPE)" == "GCC"
375 .IF "$(USE_GCC_V3_2)" == "define"
390 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
391 DEFINES = -DWIN32 $(CRYPT_FLAG)
392 LOCDEFS = -DPERLDLL -DPERL_CORE
399 LIBFILES = $(CRYPT_LIB) $(LIBC) \
400 -lmoldname -lkernel32 -luser32 -lgdi32 \
401 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
402 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
403 -lwinmm -lversion -lodbc32
405 .IF "$(CFG)" == "Debug"
406 OPTIMIZE = -g -O2 -DDEBUGGING
413 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
414 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
419 # NOTE: we assume that GCC uses MSVCRT.DLL
420 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
426 LIB32 = $(LINK32) -lib
433 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
434 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
435 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
436 LOCDEFS = -DPERLDLL -DPERL_CORE
440 .IF "$(USE_PERLCRT)" != "define"
449 .IF "$(CFG)" == "Debug"
450 .IF "$(CCTYPE)" == "MSVC20"
451 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
453 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
457 OPTIMIZE = -MD -DNDEBUG
459 .IF "$(WIN64)" == "define"
460 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
464 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
470 .IF "$(WIN64)" == "define"
471 DEFINES += -DWIN64 -DCONSERVATIVE
472 OPTIMIZE += -Wp64 -Op
475 .IF "$(USE_PERLCRT)" != "define"
476 BUILDOPT += -DPERL_MSVCRT_READFIX
479 LIBBASEFILES = $(CRYPT_LIB) \
480 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
481 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
482 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
485 # win64 doesn't have some libs
486 .IF "$(WIN64)" != "define"
487 LIBBASEFILES += odbc32.lib odbccp32.lib
490 # we add LIBC here, since we may be using PerlCRT.dll
491 LIBFILES = $(LIBBASEFILES) $(LIBC)
493 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
494 $(PCHFLAGS) $(OPTIMIZE)
495 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
496 -libpath:"$(INST_COREDIR)" \
497 -machine:$(PROCESSOR_ARCHITECTURE)
504 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
506 # used to allow local linking flags that are not propogated into Config.pm,
510 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
512 #################### do not edit below this line #######################
513 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
525 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
528 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
531 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
537 .IF "$(CCTYPE)" == "BORLAND"
538 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
539 $(IMPLIB) $(*B).lib $@
540 .ELIF "$(CCTYPE)" == "GCC"
541 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
542 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
544 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
545 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
553 MINIPERL = ..\miniperl.exe
555 PERLEXE = ..\perl.exe
556 WPERLEXE = ..\wperl.exe
557 GLOBEXE = ..\perlglob.exe
558 CONFIGPM = ..\lib\Config.pm
559 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
562 # Nominate a target which causes extensions to be re-built
563 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
564 # on and really only the interface - i.e. the .def file used to export symbols
566 PERLDEP = perldll.def
569 PL2BAT = bin\pl2bat.pl
570 GLOBBAT = bin\perlglob.bat
598 ..\lib\ExtUtils\xsubpp \
605 .IF "$(CCTYPE)" == "BORLAND"
607 CFGSH_TMPL = config.bc
608 CFGH_TMPL = config_H.bc
610 .ELIF "$(CCTYPE)" == "GCC"
612 CFGSH_TMPL = config.gc
613 CFGH_TMPL = config_H.gc
614 PERLIMPLIB = ..\libperl59$(a)
618 .IF "$(WIN64)" == "define"
619 CFGSH_TMPL = config.vc64
620 CFGH_TMPL = config_H.vc64
622 CFGSH_TMPL = config.vc
623 CFGH_TMPL = config_H.vc
628 # makedef.pl must be updated if this changes, and this should normally
629 # only change when there is an incompatible revision of the public API.
630 PERLIMPLIB *= ..\perl59$(a)
631 PERLDLL = ..\perl59.dll
633 XCOPY = xcopy /f /r /i /d
634 RCOPY = xcopy /f /r /i /e /d
638 # filenames given to xsubpp must have forward slashes (since it puts
639 # full pathnames in #line strings)
640 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
679 EXTRACORE_SRC += perllib.c
681 .IF "$(PERL_MALLOC)" == "define"
682 EXTRACORE_SRC += ..\malloc.c
685 EXTRACORE_SRC += ..\perlio.c
692 # We need this for miniperl build unless we override canned
693 # config.h #define building mini\*
694 #.IF "$(USE_PERLIO)" == "define"
695 WIN32_SRC += .\win32io.c
698 .IF "$(CRYPT_SRC)" != ""
699 WIN32_SRC += .\$(CRYPT_SRC)
702 DLL_SRC = $(DYNALOADER).c
748 .\include\sys\socket.h \
751 CORE_H = $(CORE_NOCFG_H) .\config.h
753 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
754 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
755 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
756 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
757 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
758 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
759 DLL_OBJ = $(DLL_SRC:db:+$(o))
760 X2P_OBJ = $(X2P_SRC:db:+$(o))
762 PERLDLL_OBJ = $(CORE_OBJ)
763 PERLEXE_OBJ = perlmain$(o)
765 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
767 .IF "$(USE_SETARGV)" != ""
768 SETARGV_OBJ = setargv$(o)
771 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
772 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
773 Sys/Hostname Storable Filter/Util/Call Encode \
774 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
776 STATIC_EXT = DynaLoader
779 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
781 POD2HTML = $(PODDIR)\pod2html
782 POD2MAN = $(PODDIR)\pod2man
783 POD2LATEX = $(PODDIR)\pod2latex
784 POD2TEXT = $(PODDIR)\pod2text
786 # vars must be separated by "\t+~\t+", since we're using the tempfile
787 # version of config_sh.pl (we were overflowing someone's buffer by
788 # trying to fit them all on the command line)
791 INST_DRV=$(INST_DRV) ~ \
792 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
793 INST_VER=$(INST_VER:s/\/\\/) ~ \
794 INST_ARCH=$(INST_ARCH) ~ \
795 archname=$(ARCHNAME) ~ \
798 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
799 cf_email=$(EMAIL) ~ \
800 d_crypt=$(D_CRYPT) ~ \
801 d_mymalloc=$(PERL_MALLOC) ~ \
802 libs=$(LIBFILES:f) ~ \
803 incpath=$(CCINCDIR:s/\/\\/) ~ \
804 libperl=$(PERLIMPLIB:f) ~ \
805 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
812 static_ext=$(STATIC_EXT) ~ \
813 useithreads=$(USE_ITHREADS) ~ \
814 usemultiplicity=$(USE_MULTI) ~ \
815 useperlio=$(USE_PERLIO) ~ \
816 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
820 # set up targets varying between Win95 and WinNT builds
823 .IF "$(IS_WIN95)" == "define"
825 RIGHTMAKE = __switch_makefiles
836 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
837 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
840 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
842 #----------------------------------------------------------------
844 #-------------------- BEGIN Win95 SPECIFIC ----------------------
846 # this target is a jump-off point for Win95
847 # 1. it switches to the Win95-specific makefile if it exists
848 # (__do_switch_makefiles)
849 # 2. it prints a message when the Win95-specific one finishes (__done)
850 # 3. it then kills this makefile by trying to make __no_such_target
852 __switch_makefiles: __do_switch_makefiles __done __no_such_target
854 __do_switch_makefiles:
855 .IF "$(NOTFIRST)" != "true"
856 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
861 .IF "$(NOTFIRST)" != "true"
863 @echo Build process complete. Ignore any errors after this message.
864 @echo Run "dmake test" to test and "dmake install" to install
867 # dummy targets for Win95-specific makefile
877 # This target is used to generate the new makefile (.\makefile.95) for Win95
879 .\makefile.95: .\makefile.mk
880 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
882 #--------------------- END Win95 SPECIFIC ---------------------
884 # a blank target for when builds don't need to do certain things
885 # this target added for Win95 port but used to keep the WinNT port able to
890 $(GLOBEXE) : perlglob$(o)
891 .IF "$(CCTYPE)" == "BORLAND"
892 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
893 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
894 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
895 .ELIF "$(CCTYPE)" == "GCC"
896 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
898 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
899 perlglob$(o) setargv$(o)
902 perlglob$(o) : perlglob.c
904 config.w32 : $(CFGSH_TMPL)
905 copy $(CFGSH_TMPL) config.w32
907 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
909 copy $(CFGH_TMPL) config.h
911 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
912 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
913 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
915 # this target is for when changes to the main config.sh happen
916 # edit config.{b,v,g}c and make this target once for each supported
917 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
919 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
920 $(CFGSH_TMPL) > ..\config.sh
921 -cd .. && del /f perl.exe
922 -cd .. && del /f perl*.dll
923 cd .. && perl configpm
926 -perl config_h.PL "INST_VER=$(INST_VER)"
927 rename config.h $(CFGH_TMPL)
929 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
930 cd .. && miniperl configpm
931 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
932 $(XCOPY) ..\*.h $(COREDIR)\*.*
933 $(XCOPY) *.h $(COREDIR)\*.*
934 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
935 $(RCOPY) include $(COREDIR)\*.*
936 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
937 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
939 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
940 .IF "$(CCTYPE)" == "BORLAND"
941 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
942 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
943 .ELIF "$(CCTYPE)" == "GCC"
944 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
945 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
947 $(LINK32) -subsystem:console -out:$@ \
948 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
952 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
954 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
955 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
957 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
958 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
960 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
961 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
962 # unless the .IF is true), so instead we use a .ELSE with the default.
963 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
965 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
966 .IF "$(USE_IMP_SYS)" == "define"
967 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
969 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
972 # 1. we don't want to rebuild miniperl.exe when config.h changes
973 # 2. we don't want to rebuild miniperl.exe with non-default config.h
974 $(MINI_OBJ) : $(CORE_NOCFG_H)
976 $(WIN32_OBJ) : $(CORE_H)
977 $(CORE_OBJ) : $(CORE_H)
978 $(DLL_OBJ) : $(CORE_H)
979 $(X2P_OBJ) : $(CORE_H)
981 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
982 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
983 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
985 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
986 .IF "$(CCTYPE)" == "BORLAND"
987 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
988 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
993 .ELIF "$(CCTYPE)" == "GCC"
994 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
995 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
996 dlltool --output-lib $(PERLIMPLIB) \
997 --dllname $(PERLDLL:b).dll \
999 --base-file perl.base \
1000 --output-exp perl.exp
1001 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1002 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1005 $(LINK32) -dll -def:perldll.def -out:$@ \
1006 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1007 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1009 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1011 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1012 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1014 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1015 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1017 ..\x2p\hash$(o) : ..\x2p\hash.c
1018 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1020 ..\x2p\str$(o) : ..\x2p\str.c
1021 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1023 ..\x2p\util$(o) : ..\x2p\util.c
1024 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1026 ..\x2p\walk$(o) : ..\x2p\walk.c
1027 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1029 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1030 $(MINIPERL) ..\x2p\find2perl.PL
1031 $(MINIPERL) ..\x2p\s2p.PL
1032 .IF "$(CCTYPE)" == "BORLAND"
1033 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1034 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1035 .ELIF "$(CCTYPE)" == "GCC"
1036 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1037 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1039 $(LINK32) -subsystem:console -out:$@ \
1040 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1043 perlmain.c : runperl.c
1044 copy runperl.c perlmain.c
1046 perlmain$(o) : perlmain.c
1047 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1049 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1050 .IF "$(CCTYPE)" == "BORLAND"
1051 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1052 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1054 $(PERLIMPLIB) $(LIBFILES)\n)
1055 .ELIF "$(CCTYPE)" == "GCC"
1056 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1057 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1059 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1060 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1062 copy $(PERLEXE) $(WPERLEXE)
1063 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1064 copy splittree.pl ..
1065 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1067 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1068 if not exist $(AUTODIR) mkdir $(AUTODIR)
1069 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1070 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1071 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1072 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1073 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1074 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1076 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1077 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1079 #----------------------------------------------------------------------------------
1080 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1081 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1084 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1086 #----------------------------------------------------------------------------------
1090 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1091 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1092 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1094 utils: $(PERLEXE) $(X2P)
1095 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1096 copy ..\README.aix ..\pod\perlaix.pod
1097 copy ..\README.amiga ..\pod\perlamiga.pod
1098 copy ..\README.apollo ..\pod\perlapollo.pod
1099 copy ..\README.beos ..\pod\perlbeos.pod
1100 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1101 copy ..\README.ce ..\pod\perlce.pod
1102 copy ..\README.cygwin ..\pod\perlcygwin.pod
1103 copy ..\README.dgux ..\pod\perldgux.pod
1104 copy ..\README.dos ..\pod\perldos.pod
1105 copy ..\README.epoc ..\pod\perlepoc.pod
1106 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1107 copy ..\README.hpux ..\pod\perlhpux.pod
1108 copy ..\README.hurd ..\pod\perlhurd.pod
1109 copy ..\README.irix ..\pod\perlirix.pod
1110 copy ..\README.machten ..\pod\perlmachten.pod
1111 copy ..\README.macos ..\pod\perlmacos.pod
1112 copy ..\README.mint ..\pod\perlmint.pod
1113 copy ..\README.mpeix ..\pod\perlmpeix.pod
1114 copy ..\README.netware ..\pod\perlnetware.pod
1115 copy ..\README.os2 ..\pod\perlos2.pod
1116 copy ..\README.os390 ..\pod\perlos390.pod
1117 copy ..\README.os400 ..\pod\perlos400.pod
1118 copy ..\README.plan9 ..\pod\perlplan9.pod
1119 copy ..\README.qnx ..\pod\perlqnx.pod
1120 copy ..\README.solaris ..\pod\perlsolaris.pod
1121 copy ..\README.tru64 ..\pod\perltru64.pod
1122 copy ..\README.uts ..\pod\perluts.pod
1123 copy ..\README.vmesa ..\pod\perlvmesa.pod
1124 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1125 copy ..\README.vos ..\pod\perlvos.pod
1126 copy ..\README.win32 ..\pod\perlwin32.pod
1127 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1128 cd ..\lib && $(PERLEXE) lib_pm.PL
1129 $(PERLEXE) $(PL2BAT) $(UTILS)
1132 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1133 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1135 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1136 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1137 -del /f $(LIBDIR)\XSLoader.pm
1138 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1139 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1140 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1141 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1142 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1143 -del /f $(LIBDIR)\PerlIO\scalar.pm
1144 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1145 -del /f $(LIBDIR)\File\Glob.pm
1146 -del /f $(LIBDIR)\Storable.pm
1147 -del /f $(LIBDIR)\Filter\Util\Call.pm
1148 -del /f $(LIBDIR)\Digest\MD5.pm
1149 -del /f $(LIBDIR)\MIME\Base64.pm
1150 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1151 -del /f $(LIBDIR)\Time\HiRes.pm
1152 -del /f $(LIBDIR)\List\Util.pm
1153 -del /f $(LIBDIR)\Scalar\Util.pm
1154 -del /f $(LIBDIR)\Unicode\Normalize.pm
1155 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
1156 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
1157 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
1158 -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
1159 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
1160 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
1161 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
1162 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
1163 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
1164 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1165 perlaix.pod perlamiga.pod perlapollo.pod \
1166 perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1167 perldos.pod perlepoc.pod perlfreebsd.pod perlhpux.pod perlhurd.pod \
1168 perlirix.pod perlmachten.pod perlmint.pod \
1169 perlmacos.pod perlmpeix.pod perlnetware.pod \
1170 perlos2.pod perlos390.pod perlos400.pod \
1171 perlplan9.pod perlqnx.pod \
1172 perlsolaris.pod perltru64.pod perluts.pod \
1173 perlvmesa.pod perlvms.pod perlvos.pod \
1174 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1175 podchecker podselect
1176 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1177 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv *.bat
1178 -cd ..\x2p && del /f find2perl s2p psed *.bat
1179 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1182 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1183 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1184 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
1185 -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
1187 install : all installbare installhtml
1189 installbare : $(RIGHTMAKE) utils
1190 $(PERLEXE) ..\installperl
1191 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1192 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1193 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1196 $(RCOPY) html\*.* $(INST_HTML)\*.*
1198 inst_lib : $(CONFIGPM)
1199 copy splittree.pl ..
1200 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1201 $(RCOPY) ..\lib $(INST_LIB)\*.*
1203 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1204 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1205 .IF "$(CCTYPE)" == "BORLAND"
1206 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1208 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1213 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1215 test-prep : all utils
1216 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1217 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1218 .IF "$(CCTYPE)" == "BORLAND"
1219 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1221 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1224 test : $(RIGHTMAKE) test-prep
1225 cd ..\t && $(PERLEXE) -I..\lib harness
1227 test-notty : test-prep
1228 set PERL_SKIP_TTY_TEST=1 && \
1229 cd ..\t && $(PERLEXE) -I.\lib harness
1231 test-wide : test-prep
1232 set HARNESS_PERL_SWITCHES=-C && \
1233 cd ..\t && $(PERLEXE) -I..\lib harness
1235 test-wide-notty : test-prep
1236 set PERL_SKIP_TTY_TEST=1 && \
1237 set HARNESS_PERL_SWITCHES=-C && \
1238 cd ..\t && $(PERLEXE) -I..\lib harness
1240 _test : $(RIGHTMAKE)
1241 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1242 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1243 .IF "$(CCTYPE)" == "BORLAND"
1244 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1246 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1248 cd ..\t && $(PERLEXE) -I..\lib harness
1250 clean : Extensions_clean
1251 -@erase miniperlmain$(o)
1253 -@erase perlglob$(o)
1254 -@erase perlmain$(o)
1262 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
1263 -@erase $(WIN32_OBJ)
1266 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1267 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1268 -@erase ..\x2p\*.exe ..\x2p\*.bat
1272 # Handy way to run perlbug -ok without having to install and run the
1273 # installed perlbug. We don't re-run the tests here - we trust the user.
1274 # Please *don't* use this unless all tests pass.
1275 # If you want to report test failures, use "dmake nok" instead.
1277 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1280 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1283 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1286 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok