2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
101 # Borland 5.02 or later
103 # MinGW with gcc-2.95.2 or later
107 # uncomment this if your Borland compiler is older than v5.4.
110 # uncomment this if you want to use Borland's VCL as your CRT
114 # uncomment this if you are compiling under Windows 95/98 and command.com
115 # (not needed if you're running under 4DOS/NT 6.01 or later)
119 # uncomment next line if you want debug version of perl (big,slow)
120 # If not enabled, we automatically try to use maximum optimization
121 # with all compilers that are known to have a working optimizer.
126 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
127 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
128 # This currently requires VC 5.0 with Service Pack 3 or later.
129 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
130 # and follow the directions in the package to install.
132 # Not recommended if you have VC 6.x and you're not running Windows 9x.
134 #USE_PERLCRT *= define
137 # uncomment to enable linking with setargv.obj under the Visual C
138 # compiler. Setting this options enables perl to expand wildcards in
139 # arguments, but it may be harder to use alternate methods like
140 # File::DosGlob that are more powerful. This option is supported only with
143 #USE_SETARGV *= define
146 # if you want to have the crypt() builtin function implemented, leave this or
147 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
148 # version of des_fcrypt().
150 CRYPT_SRC *= fcrypt.c
153 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
154 # library, uncomment this, and make sure the library exists (see README.win32)
155 # Specify the full pathname of the library.
157 #CRYPT_LIB *= fcrypt.lib
160 # set this if you wish to use perl's malloc
161 # WARNING: Turning this on/off WILL break binary compatibility with extensions
162 # you may have compiled with/without it. Be prepared to recompile all
163 # extensions if you change the default. Currently, this cannot be enabled
164 # if you ask for USE_IMP_SYS above.
166 #PERL_MALLOC *= define
169 # set this to enable debugging mstats
170 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
171 # be enabled without PERL_MALLOC as well.
173 #DEBUG_MSTATS *= define
176 # set the install locations of the compiler include/libraries
177 # Running VCVARS32.BAT is *required* when using Visual C.
178 # Some versions of Visual C don't define MSVCDIR in the environment,
179 # so you may have to set CCHOME explicitly (spaces in the path name should
182 .IF "$(CCTYPE)" == "BORLAND"
183 CCHOME *= C:\borland\bcc55
184 .ELIF "$(CCTYPE)" == "GCC"
189 CCINCDIR *= $(CCHOME)\include
190 CCLIBDIR *= $(CCHOME)\lib
193 # Additional compiler flags can be specified here.
195 BUILDOPT *= $(BUILDOPTEXTRA)
198 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
199 # internal hash function unless the PERL_HASH_SEED environment variable is set.
200 # Alternatively, adding -DNO_HASH_SEED will completely disable the
201 # randomization feature.
202 # The latter is required to maintain binary compatibility with Perl 5.8.0.
204 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
205 #BUILDOPT += -DNO_HASH_SEED
208 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
209 # for old symbols by default, at the expense of extreme pollution. You most
210 # probably just want to build modules that won't compile with
211 # perl Makefile.PL POLLUTE=1
212 # instead of enabling this. Please report such modules to the respective
215 #BUILDOPT += -DPERL_POLLUTE
218 # This should normally be disabled. Enabling it will disable the File::Glob
219 # implementation of CORE::glob.
221 #BUILDOPT += -DPERL_EXTERNAL_GLOB
224 # This should normally be disabled. Enabling it causes perl to read scripts
225 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
227 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
230 # specify semicolon-separated list of extra directories that modules will
231 # look for libraries (spaces in path names need not be quoted)
236 # set this to point to cmd.exe (only needed if you use some
237 # alternate shell that doesn't grok cmd.exe style commands)
239 #SHELL *= g:\winnt\system32\cmd.exe
242 # set this to your email address (perl will guess a value from
243 # from your loginname and your hostname, which may not be right)
248 ## Build configuration ends.
251 ##################### CHANGE THESE ONLY IF YOU MUST #####################
253 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
257 CRYPT_FLAG = -DHAVE_DES_FCRYPT
261 DEBUG_MSTATS *= undef
263 USE_SITECUST *= undef
265 USE_ITHREADS *= undef
268 USE_LARGE_FILES *= undef
271 .IF "$(USE_IMP_SYS)" == "define"
275 .IF "$(PERL_MALLOC)" == "undef"
279 .IF "$(DEBUG_MSTATS)" == "define"
280 BUILDOPT += -DPERL_DEBUGGING_MSTATS
283 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
287 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
291 .IF "$(USE_SITECUST)" == "define"
292 BUILDOPT += -DUSE_SITECUSTOMIZE
295 .IF "$(USE_MULTI)" != "undef"
296 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
299 .IF "$(USE_IMP_SYS)" != "undef"
300 BUILDOPT += -DPERL_IMPLICIT_SYS
303 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
305 PROCESSOR_ARCHITECTURE *= x86
308 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
309 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
311 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
318 .IF "$(USE_MULTI)" == "define"
319 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
321 .IF "$(USE_PERLIO)" == "define"
322 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
324 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
326 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
329 .IF "$(USE_ITHREADS)" == "define"
330 ARCHNAME !:= $(ARCHNAME)-thread
333 # Visual Studio 98 specific
334 .IF "$(CCTYPE)" == "MSVC60"
336 # VC 6.0 can load the socket dll on demand. Makes the test suite
337 # run in about 10% less time.
338 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
340 .IF "$(CFG)" == "Debug"
342 # VC 6.0 seems capable of compiling perl correctly with optimizations
343 # enabled. Anything earlier fails tests.
348 ARCHDIR = ..\lib\$(ARCHNAME)
349 COREDIR = ..\lib\CORE
350 AUTODIR = ..\lib\auto
354 EXTUTILSDIR = $(LIBDIR)\ExtUtils
357 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
358 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
359 INST_LIB = $(INST_TOP)$(INST_VER)\lib
360 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
361 INST_COREDIR = $(INST_ARCHLIB)\CORE
362 INST_POD = $(INST_LIB)\pod
363 INST_HTML = $(INST_TOP)$(INST_VER)\html
366 # Programs to compile, build .lib files and link
371 .IF "$(CCTYPE)" == "BORLAND"
374 .IF "$(BCCOLD)" != "define"
386 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
387 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
388 DEFINES = -DWIN32 $(CRYPT_FLAG)
389 LOCDEFS = -DPERLDLL -DPERL_CORE
394 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
396 .IF "$(CFG)" == "Debug"
397 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
400 OPTIMIZE = -O2 -D_RTLDLL
404 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
405 $(PCHFLAGS) $(OPTIMIZE)
406 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
410 .IF "$(BCCOLD)" != "define"
412 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
414 .IF "$(BCCVCL)" == "define"
415 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
416 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
420 .ELIF "$(CCTYPE)" == "GCC"
436 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
437 DEFINES = -DWIN32 $(CRYPT_FLAG)
438 LOCDEFS = -DPERLDLL -DPERL_CORE
445 LIBFILES = $(CRYPT_LIB) $(LIBC) \
446 -lmoldname -lkernel32 -luser32 -lgdi32 \
447 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
448 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
449 -lwinmm -lversion -lodbc32
451 .IF "$(CFG)" == "Debug"
452 OPTIMIZE = -g -O2 -DDEBUGGING
459 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
460 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
465 # NOTE: we assume that GCC uses MSVCRT.DLL
466 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
472 LIB32 = $(LINK32) -lib
479 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
480 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
481 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
482 LOCDEFS = -DPERLDLL -DPERL_CORE
486 .IF "$(USE_PERLCRT)" != "define"
492 .IF "$(CFG)" == "Debug"
493 .IF "$(CCTYPE)" == "MSVC20"
494 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
496 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
500 OPTIMIZE = -MD -Zi -DNDEBUG
501 # we enable debug symbols in release builds also
502 LINK_DBG = -debug -opt:ref,icf
503 # you may want to enable this if you want COFF symbols in the executables
504 # in addition to the PDB symbols. The default Dr. Watson that ships with
505 # Windows can use the the former but not latter. The free WinDbg can be
506 # installed to get better stack traces from just the PDB symbols, so we
507 # avoid the bloat of COFF symbols by default.
508 #LINK_DBG = $(LINK_DBG) -debugtype:both
509 .IF "$(WIN64)" == "define"
510 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
514 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
520 .IF "$(WIN64)" == "define"
521 DEFINES += -DWIN64 -DCONSERVATIVE
522 OPTIMIZE += -Wp64 -Op
525 .IF "$(USE_PERLCRT)" != "define"
526 BUILDOPT += -DPERL_MSVCRT_READFIX
529 LIBBASEFILES = $(CRYPT_LIB) \
530 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
531 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
532 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
535 # win64 doesn't have some libs
536 .IF "$(WIN64)" != "define"
537 LIBBASEFILES += odbc32.lib odbccp32.lib
540 # we add LIBC here, since we may be using PerlCRT.dll
541 LIBFILES = $(LIBBASEFILES) $(LIBC)
543 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
544 $(PCHFLAGS) $(OPTIMIZE)
545 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
546 -libpath:"$(INST_COREDIR)" \
547 -machine:$(PROCESSOR_ARCHITECTURE)
554 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
556 # used to allow local linking flags that are not propogated into Config.pm,
560 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
562 #################### do not edit below this line #######################
563 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
565 # Some dmake's built with Borland C++, including Sarathy's one at:
566 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
567 # require backslashes to be doubled-up when written to $(mktmp) files.
568 # Other dmake's do not require this and would actually output a double
569 # backslash if they were doubled-up.
570 .IF "$(shell type $(mktmp \\))"=="\\"
586 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
589 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
592 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
598 .IF "$(CCTYPE)" == "BORLAND"
599 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
600 $(IMPLIB) $(*B).lib $@
601 .ELIF "$(CCTYPE)" == "GCC"
602 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
603 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
605 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
606 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
610 .IF "$(CCTYPE)" == "GCC"
611 $(RSC) --use-temp-file -i $< -o $@
618 MINIPERL = ..\miniperl.exe
620 PERLEXE = ..\perl.exe
621 WPERLEXE = ..\wperl.exe
622 GLOBEXE = ..\perlglob.exe
623 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
624 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
627 # Unicode data files generated by mktables
628 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
629 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
630 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
631 ..\lib\unicore\PVA.pl
633 # Directories of Unicode data files generated by mktables
634 UNIDATADIR1 = ..\lib\unicore\To
635 UNIDATADIR2 = ..\lib\unicore\lib
637 PERLEXE_ICO = .\perlexe.ico
638 PERLEXE_RES = .\perlexe.res
641 # Nominate a target which causes extensions to be re-built
642 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
643 # on and really only the interface - i.e. the .def file used to export symbols
645 PERLDEP = perldll.def
648 PL2BAT = bin\pl2bat.pl
649 GLOBBAT = bin\perlglob.bat
688 .IF "$(CCTYPE)" == "BORLAND"
690 CFGSH_TMPL = config.bc
691 CFGH_TMPL = config_H.bc
693 .ELIF "$(CCTYPE)" == "GCC"
695 CFGSH_TMPL = config.gc
696 CFGH_TMPL = config_H.gc
697 PERLIMPLIB = ..\libperl59$(a)
701 .IF "$(WIN64)" == "define"
702 CFGSH_TMPL = config.vc64
703 CFGH_TMPL = config_H.vc64
705 CFGSH_TMPL = config.vc
706 CFGH_TMPL = config_H.vc
711 # makedef.pl must be updated if this changes, and this should normally
712 # only change when there is an incompatible revision of the public API.
713 PERLIMPLIB *= ..\perl59$(a)
714 PERLDLL = ..\perl59.dll
716 XCOPY = xcopy /f /r /i /d
717 RCOPY = xcopy /f /r /i /e /d
721 # filenames given to xsubpp must have forward slashes (since it puts
722 # full pathnames in #line strings)
723 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
762 EXTRACORE_SRC += perllib.c
764 .IF "$(PERL_MALLOC)" == "define"
765 EXTRACORE_SRC += ..\malloc.c
768 EXTRACORE_SRC += ..\perlio.c
775 # We need this for miniperl build unless we override canned
776 # config.h #define building mini\*
777 #.IF "$(USE_PERLIO)" == "define"
778 WIN32_SRC += .\win32io.c
781 .IF "$(CRYPT_SRC)" != ""
782 WIN32_SRC += .\$(CRYPT_SRC)
785 DLL_SRC = $(DYNALOADER).c
832 .\include\sys\socket.h \
835 CORE_H = $(CORE_NOCFG_H) .\config.h
837 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
838 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
839 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
840 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
841 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
842 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
843 DLL_OBJ = $(DLL_SRC:db:+$(o))
844 X2P_OBJ = $(X2P_SRC:db:+$(o))
846 PERLDLL_OBJ = $(CORE_OBJ)
847 PERLEXE_OBJ = perlmain$(o)
849 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
851 .IF "$(USE_SETARGV)" != ""
852 SETARGV_OBJ = setargv$(o)
855 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
856 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
857 Sys/Hostname Storable Filter/Util/Call Encode \
858 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
859 Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32
863 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
865 POD2HTML = $(PODDIR)\pod2html
866 POD2MAN = $(PODDIR)\pod2man
867 POD2LATEX = $(PODDIR)\pod2latex
868 POD2TEXT = $(PODDIR)\pod2text
870 # vars must be separated by "\t+~\t+", since we're using the tempfile
871 # version of config_sh.pl (we were overflowing someone's buffer by
872 # trying to fit them all on the command line)
875 INST_DRV=$(INST_DRV) ~ \
876 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
877 INST_VER=$(INST_VER:s,\,$B,) ~ \
878 INST_ARCH=$(INST_ARCH) ~ \
879 archname=$(ARCHNAME) ~ \
882 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
883 cf_email=$(EMAIL) ~ \
884 d_crypt=$(D_CRYPT) ~ \
885 d_mymalloc=$(PERL_MALLOC) ~ \
886 libs=$(LIBFILES:f) ~ \
887 incpath=$(CCINCDIR:s,\,$B,) ~ \
888 libperl=$(PERLIMPLIB:f) ~ \
889 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
896 static_ext=$(STATIC_EXT) ~ \
897 usethreads=$(USE_ITHREADS) ~ \
898 useithreads=$(USE_ITHREADS) ~ \
899 usemultiplicity=$(USE_MULTI) ~ \
900 useperlio=$(USE_PERLIO) ~ \
901 uselargefiles=$(USE_LARGE_FILES) ~ \
902 usesitecustomize=$(USE_SITECUST) ~ \
903 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
907 # set up targets varying between Win95 and WinNT builds
910 .IF "$(IS_WIN95)" == "define"
912 RIGHTMAKE = __switch_makefiles
922 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
923 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
926 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
928 #----------------------------------------------------------------
930 #-------------------- BEGIN Win95 SPECIFIC ----------------------
932 # this target is a jump-off point for Win95
933 # 1. it switches to the Win95-specific makefile if it exists
934 # (__do_switch_makefiles)
935 # 2. it prints a message when the Win95-specific one finishes (__done)
936 # 3. it then kills this makefile by trying to make __no_such_target
938 __switch_makefiles: __do_switch_makefiles __done __no_such_target
940 __do_switch_makefiles:
941 .IF "$(NOTFIRST)" != "true"
942 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
947 .IF "$(NOTFIRST)" != "true"
949 @echo Build process complete. Ignore any errors after this message.
950 @echo Run "dmake test" to test and "dmake install" to install
953 # dummy targets for Win95-specific makefile
963 # This target is used to generate the new makefile (.\makefile.95) for Win95
965 .\makefile.95: .\makefile.mk
966 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
968 #--------------------- END Win95 SPECIFIC ---------------------
970 # a blank target for when builds don't need to do certain things
971 # this target added for Win95 port but used to keep the WinNT port able to
976 $(GLOBEXE) : perlglob$(o)
977 .IF "$(CCTYPE)" == "BORLAND"
978 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
979 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
980 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
981 .ELIF "$(CCTYPE)" == "GCC"
982 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
984 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
985 perlglob$(o) setargv$(o)
988 perlglob$(o) : perlglob.c
990 config.w32 : $(CFGSH_TMPL)
991 copy $(CFGSH_TMPL) config.w32
993 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
995 copy $(CFGH_TMPL) config.h
997 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
998 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
999 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1001 # this target is for when changes to the main config.sh happen
1002 # edit config.{b,v,g}c and make this target once for each supported
1003 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1005 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1006 $(CFGSH_TMPL) > ..\config.sh
1007 -cd .. && del /f perl.exe
1008 -cd .. && del /f perl*.dll
1009 cd .. && perl configpm
1010 -del /f $(CFGH_TMPL)
1012 -perl config_h.PL "INST_VER=$(INST_VER)"
1013 rename config.h $(CFGH_TMPL)
1015 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1016 cd .. && miniperl configpm
1017 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1018 $(XCOPY) ..\*.h $(COREDIR)\*.*
1019 $(XCOPY) *.h $(COREDIR)\*.*
1020 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1021 $(RCOPY) include $(COREDIR)\*.*
1022 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1023 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1025 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1026 .IF "$(CCTYPE)" == "BORLAND"
1027 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1028 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1029 .ELIF "$(CCTYPE)" == "GCC"
1030 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1031 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1033 $(LINK32) -subsystem:console -out:$@ \
1034 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1038 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1040 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1041 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1043 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1044 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1046 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1047 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1048 # unless the .IF is true), so instead we use a .ELSE with the default.
1049 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1051 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1052 .IF "$(USE_IMP_SYS)" == "define"
1053 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1055 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1058 # 1. we don't want to rebuild miniperl.exe when config.h changes
1059 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1060 $(MINI_OBJ) : $(CORE_NOCFG_H)
1062 $(WIN32_OBJ) : $(CORE_H)
1064 $(CORE_OBJ) : $(CORE_H)
1066 $(DLL_OBJ) : $(CORE_H)
1068 $(X2P_OBJ) : $(CORE_H)
1070 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1071 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1072 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1073 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1075 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1076 .IF "$(CCTYPE)" == "BORLAND"
1077 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1078 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)\n \
1083 .ELIF "$(CCTYPE)" == "GCC"
1084 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1085 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1086 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
1087 $(LIBFILES) $(LKPOST))
1088 dlltool --output-lib $(PERLIMPLIB) \
1089 --dllname $(PERLDLL:b).dll \
1091 --base-file perl.base \
1092 --output-exp perl.exp
1093 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1094 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1095 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
1096 $(LIBFILES) perl.exp $(LKPOST))
1098 $(LINK32) -dll -def:perldll.def -out:$@ \
1099 @Extensions_static \
1100 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1101 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
1103 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1106 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1107 $(MINIPERL) makeico.pl > $@
1109 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1111 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1112 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1114 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1115 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1117 ..\x2p\hash$(o) : ..\x2p\hash.c
1118 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1120 ..\x2p\str$(o) : ..\x2p\str.c
1121 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1123 ..\x2p\util$(o) : ..\x2p\util.c
1124 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1126 ..\x2p\walk$(o) : ..\x2p\walk.c
1127 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1129 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1130 $(MINIPERL) ..\x2p\find2perl.PL
1131 $(MINIPERL) ..\x2p\s2p.PL
1132 .IF "$(CCTYPE)" == "BORLAND"
1133 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1134 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1135 .ELIF "$(CCTYPE)" == "GCC"
1136 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1137 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1139 $(LINK32) -subsystem:console -out:$@ \
1140 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1143 perlmain.c : runperl.c
1144 copy runperl.c perlmain.c
1146 perlmain$(o) : perlmain.c
1147 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1149 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1150 .IF "$(CCTYPE)" == "BORLAND"
1151 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1152 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)\n \
1154 $(PERLIMPLIB) $(LIBFILES)\n)
1155 .ELIF "$(CCTYPE)" == "GCC"
1156 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1157 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1159 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1160 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1162 copy $(PERLEXE) $(WPERLEXE)
1163 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1164 copy splittree.pl ..
1165 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1167 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1168 if not exist $(AUTODIR) mkdir $(AUTODIR)
1169 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1170 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1171 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1172 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1173 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1174 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1176 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1177 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1179 #-------------------------------------------------------------------------------
1180 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1181 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1182 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1184 Extensions_static : buildext.pl
1185 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1186 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1187 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1190 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1191 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1193 Extensions_realclean :
1194 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1195 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1197 #-------------------------------------------------------------------------------
1201 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1202 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1203 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1205 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1206 # so please check that script before making structural changes here
1207 utils: $(PERLEXE) $(X2P)
1208 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1209 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1210 copy ..\README.aix ..\pod\perlaix.pod
1211 copy ..\README.amiga ..\pod\perlamiga.pod
1212 copy ..\README.apollo ..\pod\perlapollo.pod
1213 copy ..\README.beos ..\pod\perlbeos.pod
1214 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1215 copy ..\README.ce ..\pod\perlce.pod
1216 copy ..\README.cn ..\pod\perlcn.pod
1217 copy ..\README.cygwin ..\pod\perlcygwin.pod
1218 copy ..\README.dgux ..\pod\perldgux.pod
1219 copy ..\README.dos ..\pod\perldos.pod
1220 copy ..\README.epoc ..\pod\perlepoc.pod
1221 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1222 copy ..\README.hpux ..\pod\perlhpux.pod
1223 copy ..\README.hurd ..\pod\perlhurd.pod
1224 copy ..\README.irix ..\pod\perlirix.pod
1225 copy ..\README.jp ..\pod\perljp.pod
1226 copy ..\README.ko ..\pod\perlko.pod
1227 copy ..\README.machten ..\pod\perlmachten.pod
1228 copy ..\README.macos ..\pod\perlmacos.pod
1229 copy ..\README.macosx ..\pod\perlmacosx.pod
1230 copy ..\README.mint ..\pod\perlmint.pod
1231 copy ..\README.mpeix ..\pod\perlmpeix.pod
1232 copy ..\README.netware ..\pod\perlnetware.pod
1233 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1234 copy ..\README.os2 ..\pod\perlos2.pod
1235 copy ..\README.os390 ..\pod\perlos390.pod
1236 copy ..\README.os400 ..\pod\perlos400.pod
1237 copy ..\README.plan9 ..\pod\perlplan9.pod
1238 copy ..\README.qnx ..\pod\perlqnx.pod
1239 copy ..\README.solaris ..\pod\perlsolaris.pod
1240 copy ..\README.symbian ..\pod\perlsymbian.pod
1241 copy ..\README.tru64 ..\pod\perltru64.pod
1242 copy ..\README.tw ..\pod\perltw.pod
1243 copy ..\README.uts ..\pod\perluts.pod
1244 copy ..\README.vmesa ..\pod\perlvmesa.pod
1245 copy ..\README.vms ..\pod\perlvms.pod
1246 copy ..\README.vos ..\pod\perlvos.pod
1247 copy ..\README.win32 ..\pod\perlwin32.pod
1248 copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
1249 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1250 cd ..\lib && $(PERLEXE) lib_pm.PL
1251 $(PERLEXE) $(PL2BAT) $(UTILS)
1253 # Note that the pod cleanup in this next section is parsed (and regenerated
1254 # by pod/buildtoc so please check that script before making changes here
1256 # the doubled rmdir calls are needed because older cmd shells
1257 # don't understand /q
1258 distclean: realclean
1259 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1260 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1262 -del /f $(DYNALOADER).c
1263 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1264 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1265 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1266 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1267 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1268 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1269 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1270 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1271 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1272 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1273 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1274 -del /f $(LIBDIR)\ByteLoader.pm
1275 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1276 -del /f $(LIBDIR)\Devel\PPPort.pm
1277 -del /f $(LIBDIR)\File\Glob.pm
1278 -del /f $(LIBDIR)\Storable.pm
1279 -del /f $(LIBDIR)\Digest\MD5.pm
1280 -del /f $(LIBDIR)\PerlIO\encoding.pm
1281 -del /f $(LIBDIR)\PerlIO\scalar.pm
1282 -del /f $(LIBDIR)\PerlIO\via.pm
1283 -del /f $(LIBDIR)\Sys\Hostname.pm
1284 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1285 -del /f $(LIBDIR)\threads\shared.pm
1286 -del /f $(LIBDIR)\Time\HiRes.pm
1287 -del /f $(LIBDIR)\Unicode\Normalize.pm
1288 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1289 -del /f $(LIBDIR)\Win32.pm
1290 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1291 -if exist $(LIBDIR)\IO\Socket rmdir /s $(LIBDIR)\IO\Socket
1292 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1293 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1294 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1295 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1296 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1297 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1298 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1299 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1300 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1301 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1302 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1303 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1304 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1305 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1306 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1307 -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
1308 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1309 -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
1310 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1311 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1312 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1313 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1314 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1315 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1316 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1317 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1318 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1319 perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
1320 perlplan9.pod perlqnx.pod perlsolaris.pod perlsymbian.pod \
1321 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
1322 perlvms.pod perlvos.pod perlwin32.pod \
1323 pod2html pod2latex pod2man pod2text pod2usage \
1324 podchecker podselect
1325 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1326 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1327 xsubpp instmodsh prove corelist
1328 -cd ..\x2p && del /f find2perl s2p psed *.bat
1329 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1333 -del /f $(PERLEXE_ICO) perl.base
1334 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1335 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1336 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1337 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1338 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1339 -if exist $(COREDIR) rmdir /s $(COREDIR)
1341 install : all installbare installhtml
1343 installbare : $(RIGHTMAKE) utils
1344 $(PERLEXE) ..\installperl
1345 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1346 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1347 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1348 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1349 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1352 $(RCOPY) html\*.* $(INST_HTML)\*.*
1354 inst_lib : $(CONFIGPM)
1355 copy splittree.pl ..
1356 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1357 $(RCOPY) ..\lib $(INST_LIB)\*.*
1359 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1360 cd ..\lib\unicore && \
1361 ..\$(MINIPERL) -I.. mktables
1363 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1364 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1365 if exist ..\t\perl.exe del /f ..\t\perl.exe
1366 rename ..\t\miniperl.exe perl.exe
1367 .IF "$(CCTYPE)" == "BORLAND"
1368 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1370 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1374 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1376 test-prep : all utils
1377 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1378 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1379 .IF "$(CCTYPE)" == "BORLAND"
1380 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1382 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1385 test : $(RIGHTMAKE) test-prep
1386 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1388 test-notty : test-prep
1389 set PERL_SKIP_TTY_TEST=1 && \
1390 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1392 _test : $(RIGHTMAKE)
1393 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1394 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1395 .IF "$(CCTYPE)" == "BORLAND"
1396 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1398 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1400 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1402 # the doubled rmdir calls are needed because older cmd shells
1403 # don't understand /q
1405 -@erase miniperlmain$(o)
1407 -@erase perlglob$(o)
1408 -@erase perlmain$(o)
1416 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1417 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1418 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1419 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1420 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1421 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1422 -@erase $(UNIDATAFILES)
1423 -@erase $(WIN32_OBJ)
1426 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1427 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1428 -@erase ..\x2p\*.exe ..\x2p\*.bat
1431 -@erase Extensions_static
1433 clean : Extensions_clean _clean
1435 realclean : Extensions_realclean _clean
1437 # Handy way to run perlbug -ok without having to install and run the
1438 # installed perlbug. We don't re-run the tests here - we trust the user.
1439 # Please *don't* use this unless all tests pass.
1440 # If you want to report test failures, use "dmake nok" instead.
1442 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1445 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1448 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1451 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok