2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl58.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # WARNING! This option is deprecated and will eventually go away (enable
80 # USE_ITHREADS instead).
82 # uncomment to enable threads-capabilities. This is incompatible with
83 # USE_ITHREADS, and is only here for people who may have come to rely
84 # on the experimental Thread support that was in 5.005.
86 #USE_5005THREADS *= define
89 # uncomment exactly one of the following
93 # Visual C++ > 2.x and < 6.x
97 # Borland 5.02 or later
99 # mingw32+gcc-2.95.2 or better
103 # uncomment this if your Borland compiler is older than v5.4.
106 # uncomment this if you want to use Borland's VCL as your CRT
110 # uncomment this if you are compiling under Windows 95/98 and command.com
111 # (not needed if you're running under 4DOS/NT 6.01 or later)
115 # uncomment next line if you want debug version of perl (big,slow)
116 # If not enabled, we automatically try to use maximum optimization
117 # with all compilers that are known to have a working optimizer.
122 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
123 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
124 # This currently requires VC 5.0 with Service Pack 3 or later.
125 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
126 # and follow the directions in the package to install.
128 # Not recommended if you have VC 6.x and you're not running Windows 9x.
130 #USE_PERLCRT *= define
133 # uncomment to enable linking with setargv.obj under the Visual C
134 # compiler. Setting this options enables perl to expand wildcards in
135 # arguments, but it may be harder to use alternate methods like
136 # File::DosGlob that are more powerful. This option is supported only with
139 #USE_SETARGV *= define
142 # if you have the source for des_fcrypt(), uncomment this and make sure the
143 # file exists (see README.win32). File should be located in the same
144 # directory as this file.
146 #CRYPT_SRC *= fcrypt.c
149 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
150 # library, uncomment this, and make sure the library exists (see README.win32)
151 # Specify the full pathname of the library.
153 #CRYPT_LIB *= fcrypt.lib
156 # set this if you wish to use perl's malloc
157 # WARNING: Turning this on/off WILL break binary compatibility with extensions
158 # you may have compiled with/without it. Be prepared to recompile all
159 # extensions if you change the default. Currently, this cannot be enabled
160 # if you ask for USE_IMP_SYS above.
162 #PERL_MALLOC *= define
165 # set the install locations of the compiler include/libraries
166 # Running VCVARS32.BAT is *required* when using Visual C.
167 # Some versions of Visual C don't define MSVCDIR in the environment,
168 # so you may have to set CCHOME explicitly (spaces in the path name should
171 .IF "$(CCTYPE)" == "BORLAND"
172 CCHOME *= C:\borland\bcc55
173 .ELIF "$(CCTYPE)" == "GCC"
178 CCINCDIR *= $(CCHOME)\include
179 CCLIBDIR *= $(CCHOME)\lib
182 # Additional compiler flags can be specified here.
186 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
187 # for old symbols by default, at the expense of extreme pollution. You most
188 # probably just want to build modules that won't compile with
189 # perl Makefile.PL POLLUTE=1
190 # instead of enabling this. Please report such modules to the respective
193 #BUILDOPT += -DPERL_POLLUTE
196 # This should normally be disabled. Enabling it will disable the File::Glob
197 # implementation of CORE::glob.
199 #BUILDOPT += -DPERL_EXTERNAL_GLOB
202 # This should normally be disabled. Enabling it causes perl to read scripts
203 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
204 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
207 # specify semicolon-separated list of extra directories that modules will
208 # look for libraries (spaces in path names need not be quoted)
213 # set this to point to cmd.exe (only needed if you use some
214 # alternate shell that doesn't grok cmd.exe style commands)
216 #SHELL *= g:\winnt\system32\cmd.exe
219 # set this to your email address (perl will guess a value from
220 # from your loginname and your hostname, which may not be right)
225 ## Build configuration ends.
228 ##################### CHANGE THESE ONLY IF YOU MUST #####################
230 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
234 CRYPT_FLAG = -DHAVE_DES_FCRYPT
239 USE_5005THREADS *= undef
241 .IF "$(USE_5005THREADS)" == "define"
242 USE_ITHREADS != undef
246 USE_ITHREADS *= undef
251 .IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
255 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
257 USE_5005THREADS != undef
260 .IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
261 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
264 .IF "$(USE_IMP_SYS)" != "undef"
265 BUILDOPT += -DPERL_IMPLICIT_SYS
268 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
270 PROCESSOR_ARCHITECTURE *= x86
273 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
274 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
276 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
283 .IF "$(USE_5005THREADS)" == "define"
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
285 .ELIF "$(USE_MULTI)" == "define"
286 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
288 .IF "$(USE_PERLIO)" == "define"
289 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
291 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
293 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
296 .IF "$(USE_ITHREADS)" == "define"
297 ARCHNAME !:= $(ARCHNAME)-thread
300 # Visual Studio 98 specific
301 .IF "$(CCTYPE)" == "MSVC60"
303 # VC 6.0 can load the socket dll on demand. Makes the test suite
304 # run in about 10% less time.
305 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
307 .IF "$(CFG)" == "Debug"
309 # VC 6.0 seems capable of compiling perl correctly with optimizations
310 # enabled. Anything earlier fails tests.
315 ARCHDIR = ..\lib\$(ARCHNAME)
316 COREDIR = ..\lib\CORE
317 AUTODIR = ..\lib\auto
321 EXTUTILSDIR = $(LIBDIR)\ExtUtils
324 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
325 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
326 INST_LIB = $(INST_TOP)$(INST_VER)\lib
327 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
328 INST_COREDIR = $(INST_ARCHLIB)\CORE
329 INST_POD = $(INST_LIB)\pod
330 INST_HTML = $(INST_TOP)$(INST_VER)\html
333 # Programs to compile, build .lib files and link
338 .IF "$(CCTYPE)" == "BORLAND"
341 .IF "$(BCCOLD)" != "define"
353 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
354 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
355 DEFINES = -DWIN32 $(CRYPT_FLAG)
356 LOCDEFS = -DPERLDLL -DPERL_CORE
361 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
363 .IF "$(CFG)" == "Debug"
364 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
367 OPTIMIZE = -O2 -D_RTLDLL
371 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
372 $(PCHFLAGS) $(OPTIMIZE)
373 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
377 .IF "$(BCCOLD)" != "define"
379 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
381 .IF "$(BCCVCL)" == "define"
382 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
383 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
387 .ELIF "$(CCTYPE)" == "GCC"
403 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
404 DEFINES = -DWIN32 $(CRYPT_FLAG)
405 LOCDEFS = -DPERLDLL -DPERL_CORE
412 LIBFILES = $(CRYPT_LIB) $(LIBC) \
413 -lmoldname -lkernel32 -luser32 -lgdi32 \
414 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
415 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
416 -lwinmm -lversion -lodbc32
418 .IF "$(CFG)" == "Debug"
419 OPTIMIZE = -g -O2 -DDEBUGGING
426 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
427 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
432 # NOTE: we assume that GCC uses MSVCRT.DLL
433 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
439 LIB32 = $(LINK32) -lib
446 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
447 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
448 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
449 LOCDEFS = -DPERLDLL -DPERL_CORE
453 .IF "$(USE_PERLCRT)" != "define"
462 .IF "$(CFG)" == "Debug"
463 .IF "$(CCTYPE)" == "MSVC20"
464 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
466 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
470 OPTIMIZE = -MD -DNDEBUG
472 .IF "$(WIN64)" == "define"
473 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
477 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
483 .IF "$(WIN64)" == "define"
484 DEFINES += -DWIN64 -DCONSERVATIVE
485 OPTIMIZE += -Wp64 -Op
488 .IF "$(USE_PERLCRT)" != "define"
489 BUILDOPT += -DPERL_MSVCRT_READFIX
492 LIBBASEFILES = $(CRYPT_LIB) \
493 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
494 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
495 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
498 # win64 doesn't have some libs
499 .IF "$(WIN64)" != "define"
500 LIBBASEFILES += odbc32.lib odbccp32.lib
503 # we add LIBC here, since we may be using PerlCRT.dll
504 LIBFILES = $(LIBBASEFILES) $(LIBC)
506 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
507 $(PCHFLAGS) $(OPTIMIZE)
508 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
509 -libpath:"$(INST_COREDIR)" \
510 -machine:$(PROCESSOR_ARCHITECTURE)
517 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
519 # used to allow local linking flags that are not propogated into Config.pm,
523 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
525 #################### do not edit below this line #######################
526 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
538 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
541 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
544 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
550 .IF "$(CCTYPE)" == "BORLAND"
551 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
552 $(IMPLIB) $(*B).lib $@
553 .ELIF "$(CCTYPE)" == "GCC"
554 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
555 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
557 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
558 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
566 MINIPERL = ..\miniperl.exe
568 PERLEXE = ..\perl.exe
569 WPERLEXE = ..\wperl.exe
570 GLOBEXE = ..\perlglob.exe
571 CONFIGPM = ..\lib\Config.pm
572 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
575 # Nominate a target which causes extensions to be re-built
576 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
577 # on and really only the interface - i.e. the .def file used to export symbols
579 PERLDEP = perldll.def
582 PL2BAT = bin\pl2bat.pl
583 GLOBBAT = bin\perlglob.bat
611 ..\lib\ExtUtils\xsubpp \
618 .IF "$(CCTYPE)" == "BORLAND"
620 CFGSH_TMPL = config.bc
621 CFGH_TMPL = config_H.bc
623 .ELIF "$(CCTYPE)" == "GCC"
625 CFGSH_TMPL = config.gc
626 CFGH_TMPL = config_H.gc
627 PERLIMPLIB = ..\libperl58$(a)
631 .IF "$(WIN64)" == "define"
632 CFGSH_TMPL = config.vc64
633 CFGH_TMPL = config_H.vc64
635 CFGSH_TMPL = config.vc
636 CFGH_TMPL = config_H.vc
641 # makedef.pl must be updated if this changes, and this should normally
642 # only change when there is an incompatible revision of the public API.
643 PERLIMPLIB *= ..\perl58$(a)
644 PERLDLL = ..\perl58.dll
646 XCOPY = xcopy /f /r /i /d
647 RCOPY = xcopy /f /r /i /e /d
651 # filenames given to xsubpp must have forward slashes (since it puts
652 # full pathnames in #line strings)
653 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
691 EXTRACORE_SRC += perllib.c
693 .IF "$(PERL_MALLOC)" == "define"
694 EXTRACORE_SRC += ..\malloc.c
697 EXTRACORE_SRC += ..\perlio.c
704 # We need this for miniperl build unless we override canned
705 # config.h #define building mini\*
706 #.IF "$(USE_PERLIO)" == "define"
707 WIN32_SRC += .\win32io.c
710 .IF "$(CRYPT_SRC)" != ""
711 WIN32_SRC += .\$(CRYPT_SRC)
714 DLL_SRC = $(DYNALOADER).c
760 .\include\sys\socket.h \
763 CORE_H = $(CORE_NOCFG_H) .\config.h
765 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
766 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
767 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
768 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
769 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
770 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
771 DLL_OBJ = $(DLL_SRC:db:+$(o))
772 X2P_OBJ = $(X2P_SRC:db:+$(o))
774 PERLDLL_OBJ = $(CORE_OBJ)
775 PERLEXE_OBJ = perlmain$(o)
777 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
779 .IF "$(USE_SETARGV)" != ""
780 SETARGV_OBJ = setargv$(o)
783 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
784 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
785 Sys/Hostname Storable Filter/Util/Call Encode \
786 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
788 STATIC_EXT = DynaLoader
791 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
793 POD2HTML = $(PODDIR)\pod2html
794 POD2MAN = $(PODDIR)\pod2man
795 POD2LATEX = $(PODDIR)\pod2latex
796 POD2TEXT = $(PODDIR)\pod2text
798 # vars must be separated by "\t+~\t+", since we're using the tempfile
799 # version of config_sh.pl (we were overflowing someone's buffer by
800 # trying to fit them all on the command line)
803 INST_DRV=$(INST_DRV) ~ \
804 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
805 INST_VER=$(INST_VER:s/\/\\/) ~ \
806 INST_ARCH=$(INST_ARCH) ~ \
807 archname=$(ARCHNAME) ~ \
810 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
811 cf_email=$(EMAIL) ~ \
812 d_crypt=$(D_CRYPT) ~ \
813 d_mymalloc=$(PERL_MALLOC) ~ \
814 libs=$(LIBFILES:f) ~ \
815 incpath=$(CCINCDIR:s/\/\\/) ~ \
816 libperl=$(PERLIMPLIB:f) ~ \
817 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
824 static_ext=$(STATIC_EXT) ~ \
825 use5005threads=$(USE_5005THREADS) ~ \
826 useithreads=$(USE_ITHREADS) ~ \
827 usethreads=$(USE_5005THREADS) ~ \
828 usemultiplicity=$(USE_MULTI) ~ \
829 useperlio=$(USE_PERLIO) ~ \
830 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
834 # set up targets varying between Win95 and WinNT builds
837 .IF "$(IS_WIN95)" == "define"
839 RIGHTMAKE = __switch_makefiles
850 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
851 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
854 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
856 #----------------------------------------------------------------
858 #-------------------- BEGIN Win95 SPECIFIC ----------------------
860 # this target is a jump-off point for Win95
861 # 1. it switches to the Win95-specific makefile if it exists
862 # (__do_switch_makefiles)
863 # 2. it prints a message when the Win95-specific one finishes (__done)
864 # 3. it then kills this makefile by trying to make __no_such_target
866 __switch_makefiles: __do_switch_makefiles __done __no_such_target
868 __do_switch_makefiles:
869 .IF "$(NOTFIRST)" != "true"
870 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
875 .IF "$(NOTFIRST)" != "true"
877 @echo Build process complete. Ignore any errors after this message.
878 @echo Run "dmake test" to test and "dmake install" to install
881 # dummy targets for Win95-specific makefile
891 # This target is used to generate the new makefile (.\makefile.95) for Win95
893 .\makefile.95: .\makefile.mk
894 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
896 #--------------------- END Win95 SPECIFIC ---------------------
898 # a blank target for when builds don't need to do certain things
899 # this target added for Win95 port but used to keep the WinNT port able to
904 $(GLOBEXE) : perlglob$(o)
905 .IF "$(CCTYPE)" == "BORLAND"
906 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
907 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
908 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
909 .ELIF "$(CCTYPE)" == "GCC"
910 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
912 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
913 perlglob$(o) setargv$(o)
916 perlglob$(o) : perlglob.c
918 config.w32 : $(CFGSH_TMPL)
919 copy $(CFGSH_TMPL) config.w32
921 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
923 copy $(CFGH_TMPL) config.h
925 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
926 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
927 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
929 # this target is for when changes to the main config.sh happen
930 # edit config.{b,v,g}c and make this target once for each supported
931 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
933 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
934 $(CFGSH_TMPL) > ..\config.sh
935 -cd .. && del /f perl.exe
936 -cd .. && del /f perl*.dll
937 cd .. && perl configpm
940 -perl config_h.PL "INST_VER=$(INST_VER)"
941 rename config.h $(CFGH_TMPL)
943 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
944 cd .. && miniperl configpm
945 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
946 $(XCOPY) ..\*.h $(COREDIR)\*.*
947 $(XCOPY) *.h $(COREDIR)\*.*
948 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
949 $(RCOPY) include $(COREDIR)\*.*
950 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
951 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
953 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
954 .IF "$(CCTYPE)" == "BORLAND"
955 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
956 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
957 .ELIF "$(CCTYPE)" == "GCC"
958 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
959 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
961 $(LINK32) -subsystem:console -out:$@ \
962 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
966 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
968 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
969 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
971 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
972 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
974 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
975 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
976 # unless the .IF is true), so instead we use a .ELSE with the default.
977 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
979 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
980 .IF "$(USE_IMP_SYS)" == "define"
981 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
983 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
986 # 1. we don't want to rebuild miniperl.exe when config.h changes
987 # 2. we don't want to rebuild miniperl.exe with non-default config.h
988 $(MINI_OBJ) : $(CORE_NOCFG_H)
990 $(WIN32_OBJ) : $(CORE_H)
991 $(CORE_OBJ) : $(CORE_H)
992 $(DLL_OBJ) : $(CORE_H)
993 $(X2P_OBJ) : $(CORE_H)
995 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
996 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
997 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
999 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
1000 .IF "$(CCTYPE)" == "BORLAND"
1001 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1002 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1007 .ELIF "$(CCTYPE)" == "GCC"
1008 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1009 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1010 dlltool --output-lib $(PERLIMPLIB) \
1011 --dllname $(PERLDLL:b).dll \
1013 --base-file perl.base \
1014 --output-exp perl.exp
1015 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1016 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1019 $(LINK32) -dll -def:perldll.def -out:$@ \
1020 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1021 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1023 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1025 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1026 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1028 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1029 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1031 ..\x2p\hash$(o) : ..\x2p\hash.c
1032 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1034 ..\x2p\str$(o) : ..\x2p\str.c
1035 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1037 ..\x2p\util$(o) : ..\x2p\util.c
1038 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1040 ..\x2p\walk$(o) : ..\x2p\walk.c
1041 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1043 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1044 $(MINIPERL) ..\x2p\find2perl.PL
1045 $(MINIPERL) ..\x2p\s2p.PL
1046 .IF "$(CCTYPE)" == "BORLAND"
1047 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1048 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1049 .ELIF "$(CCTYPE)" == "GCC"
1050 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1051 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1053 $(LINK32) -subsystem:console -out:$@ \
1054 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1057 perlmain.c : runperl.c
1058 copy runperl.c perlmain.c
1060 perlmain$(o) : perlmain.c
1061 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1063 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1064 .IF "$(CCTYPE)" == "BORLAND"
1065 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1066 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1068 $(PERLIMPLIB) $(LIBFILES)\n)
1069 .ELIF "$(CCTYPE)" == "GCC"
1070 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1071 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1073 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1074 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1076 copy $(PERLEXE) $(WPERLEXE)
1077 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1078 copy splittree.pl ..
1079 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1081 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1082 if not exist $(AUTODIR) mkdir $(AUTODIR)
1083 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1084 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1085 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1086 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1087 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1088 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1090 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1091 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1093 #----------------------------------------------------------------------------------
1094 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1095 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1098 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1100 #----------------------------------------------------------------------------------
1104 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1105 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1106 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1108 utils: $(PERLEXE) $(X2P)
1109 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1110 copy ..\README.aix ..\pod\perlaix.pod
1111 copy ..\README.amiga ..\pod\perlamiga.pod
1112 copy ..\README.apollo ..\pod\perlapollo.pod
1113 copy ..\README.beos ..\pod\perlbeos.pod
1114 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1115 copy ..\README.ce ..\pod\perlce.pod
1116 copy ..\README.cygwin ..\pod\perlcygwin.pod
1117 copy ..\README.dgux ..\pod\perldgux.pod
1118 copy ..\README.dos ..\pod\perldos.pod
1119 copy ..\README.epoc ..\pod\perlepoc.pod
1120 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1121 copy ..\README.hpux ..\pod\perlhpux.pod
1122 copy ..\README.hurd ..\pod\perlhurd.pod
1123 copy ..\README.irix ..\pod\perlirix.pod
1124 copy ..\README.machten ..\pod\perlmachten.pod
1125 copy ..\README.macos ..\pod\perlmacos.pod
1126 copy ..\README.mint ..\pod\perlmint.pod
1127 copy ..\README.mpeix ..\pod\perlmpeix.pod
1128 copy ..\README.netware ..\pod\perlnetware.pod
1129 copy ..\README.os2 ..\pod\perlos2.pod
1130 copy ..\README.os390 ..\pod\perlos390.pod
1131 copy ..\README.plan9 ..\pod\perlplan9.pod
1132 copy ..\README.qnx ..\pod\perlqnx.pod
1133 copy ..\README.solaris ..\pod\perlsolaris.pod
1134 copy ..\README.tru64 ..\pod\perltru64.pod
1135 copy ..\README.uts ..\pod\perluts.pod
1136 copy ..\README.vmesa ..\pod\perlvmesa.pod
1137 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1138 copy ..\README.vos ..\pod\perlvos.pod
1139 copy ..\README.win32 ..\pod\perlwin32.pod
1140 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1141 cd ..\lib && $(PERLEXE) lib_pm.PL
1142 $(PERLEXE) $(PL2BAT) $(UTILS)
1145 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1146 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1148 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1149 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1150 -del /f $(LIBDIR)\XSLoader.pm
1151 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1152 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1153 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1154 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1155 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1156 -del /f $(LIBDIR)\PerlIO\scalar.pm
1157 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1158 -del /f $(LIBDIR)\File\Glob.pm
1159 -del /f $(LIBDIR)\Storable.pm
1160 -del /f $(LIBDIR)\Filter\Util\Call.pm
1161 -del /f $(LIBDIR)\Digest\MD5.pm
1162 -del /f $(LIBDIR)\MIME\Base64.pm
1163 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1164 -del /f $(LIBDIR)\Time\HiRes.pm
1165 -del /f $(LIBDIR)\List\Util.pm
1166 -del /f $(LIBDIR)\Scalar\Util.pm
1167 -del /f $(LIBDIR)\Unicode\Normalize.pm
1168 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
1169 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
1170 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
1171 -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
1172 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
1173 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
1174 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
1175 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
1176 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
1177 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1178 perlaix.pod perlamiga.pod perlapollo.pod \
1179 perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1180 perldos.pod perlepoc.pod perlfreebsd.pod perlhpux.pod perlhurd.pod \
1181 perlirix.pod perlmachten.pod perlmint.pod \
1182 perlmacos.pod perlmpeix.pod perlnetware.pod \
1183 perlos2.pod perlos390.pod \
1184 perlplan9.pod perlqnx.pod \
1185 perlsolaris.pod perltru64.pod perluts.pod \
1186 perlvmesa.pod perlvms.pod perlvos.pod \
1187 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1188 podchecker podselect
1189 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1190 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv *.bat
1191 -cd ..\x2p && del /f find2perl s2p psed *.bat
1192 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1195 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1196 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1197 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
1198 -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
1200 install : all installbare installhtml
1202 installbare : $(RIGHTMAKE) utils
1203 $(PERLEXE) ..\installperl
1204 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1205 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1206 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1209 $(RCOPY) html\*.* $(INST_HTML)\*.*
1211 inst_lib : $(CONFIGPM)
1212 copy splittree.pl ..
1213 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1214 $(RCOPY) ..\lib $(INST_LIB)\*.*
1216 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1217 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1218 .IF "$(CCTYPE)" == "BORLAND"
1219 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1221 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1226 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1228 test-prep : all utils
1229 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1230 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1231 .IF "$(CCTYPE)" == "BORLAND"
1232 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1234 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1237 test : $(RIGHTMAKE) test-prep
1238 cd ..\t && $(PERLEXE) -I..\lib harness
1240 test-notty : test-prep
1241 set PERL_SKIP_TTY_TEST=1 && \
1242 cd ..\t && $(PERLEXE) -I.\lib harness
1244 test-wide : test-prep
1245 set HARNESS_PERL_SWITCHES=-C && \
1246 cd ..\t && $(PERLEXE) -I..\lib harness
1248 test-wide-notty : test-prep
1249 set PERL_SKIP_TTY_TEST=1 && \
1250 set HARNESS_PERL_SWITCHES=-C && \
1251 cd ..\t && $(PERLEXE) -I..\lib harness
1253 _test : $(RIGHTMAKE)
1254 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1255 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1256 .IF "$(CCTYPE)" == "BORLAND"
1257 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1259 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1261 cd ..\t && $(PERLEXE) -I..\lib harness
1263 clean : Extensions_clean
1264 -@erase miniperlmain$(o)
1266 -@erase perlglob$(o)
1267 -@erase perlmain$(o)
1275 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
1276 -@erase $(WIN32_OBJ)
1279 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1280 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1281 -@erase ..\x2p\*.exe ..\x2p\*.bat
1285 # Handy way to run perlbug -ok without having to install and run the
1286 # installed perlbug. We don't re-run the tests here - we trust the user.
1287 # Please *don't* use this unless all tests pass.
1288 # If you want to report test failures, use "dmake nok" instead.
1290 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1293 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1296 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1299 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok