2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # Comment this out if you don't want to enable large file support for
80 # some reason. Should normally only be changed to maintain compatibility
81 # with an older release of perl.
82 USE_LARGE_FILES *= define
85 # uncomment exactly one of the following
89 # Visual C++ > 2.x and < 6.x
93 # Borland 5.02 or later
95 # mingw32+gcc-2.95.2 or better
97 # Uncomment this if you are using the latest MinGW release (2.0.0)
99 #USE_GCC_V3_2 *= define
102 # uncomment this if your Borland compiler is older than v5.4.
105 # uncomment this if you want to use Borland's VCL as your CRT
109 # uncomment this if you are compiling under Windows 95/98 and command.com
110 # (not needed if you're running under 4DOS/NT 6.01 or later)
114 # uncomment next line if you want debug version of perl (big,slow)
115 # If not enabled, we automatically try to use maximum optimization
116 # with all compilers that are known to have a working optimizer.
121 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
122 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
123 # This currently requires VC 5.0 with Service Pack 3 or later.
124 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
125 # and follow the directions in the package to install.
127 # Not recommended if you have VC 6.x and you're not running Windows 9x.
129 #USE_PERLCRT *= define
132 # uncomment to enable linking with setargv.obj under the Visual C
133 # compiler. Setting this options enables perl to expand wildcards in
134 # arguments, but it may be harder to use alternate methods like
135 # File::DosGlob that are more powerful. This option is supported only with
138 #USE_SETARGV *= define
141 # if you have the source for des_fcrypt(), uncomment this and make sure the
142 # file exists (see README.win32). File should be located in the same
143 # directory as this file.
145 #CRYPT_SRC *= fcrypt.c
148 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
149 # library, uncomment this, and make sure the library exists (see README.win32)
150 # Specify the full pathname of the library.
152 #CRYPT_LIB *= fcrypt.lib
155 # set this if you wish to use perl's malloc
156 # WARNING: Turning this on/off WILL break binary compatibility with extensions
157 # you may have compiled with/without it. Be prepared to recompile all
158 # extensions if you change the default. Currently, this cannot be enabled
159 # if you ask for USE_IMP_SYS above.
161 #PERL_MALLOC *= define
164 # set the install locations of the compiler include/libraries
165 # Running VCVARS32.BAT is *required* when using Visual C.
166 # Some versions of Visual C don't define MSVCDIR in the environment,
167 # so you may have to set CCHOME explicitly (spaces in the path name should
170 .IF "$(CCTYPE)" == "BORLAND"
171 CCHOME *= C:\borland\bcc55
172 .ELIF "$(CCTYPE)" == "GCC"
177 CCINCDIR *= $(CCHOME)\include
178 CCLIBDIR *= $(CCHOME)\lib
181 # Additional compiler flags can be specified here.
185 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
186 # for old symbols by default, at the expense of extreme pollution. You most
187 # probably just want to build modules that won't compile with
188 # perl Makefile.PL POLLUTE=1
189 # instead of enabling this. Please report such modules to the respective
192 #BUILDOPT += -DPERL_POLLUTE
195 # This should normally be disabled. Enabling it will disable the File::Glob
196 # implementation of CORE::glob.
198 #BUILDOPT += -DPERL_EXTERNAL_GLOB
201 # This should normally be disabled. Enabling it causes perl to read scripts
202 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
203 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
206 # specify semicolon-separated list of extra directories that modules will
207 # look for libraries (spaces in path names need not be quoted)
212 # set this to point to cmd.exe (only needed if you use some
213 # alternate shell that doesn't grok cmd.exe style commands)
215 #SHELL *= g:\winnt\system32\cmd.exe
218 # set this to your email address (perl will guess a value from
219 # from your loginname and your hostname, which may not be right)
224 ## Build configuration ends.
227 ##################### CHANGE THESE ONLY IF YOU MUST #####################
229 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
233 CRYPT_FLAG = -DHAVE_DES_FCRYPT
239 USE_ITHREADS *= undef
242 USE_LARGE_FILES *= undef
245 .IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
249 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
253 .IF "$(USE_MULTI)" != "undef"
254 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
257 .IF "$(USE_IMP_SYS)" != "undef"
258 BUILDOPT += -DPERL_IMPLICIT_SYS
261 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
263 PROCESSOR_ARCHITECTURE *= x86
266 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
267 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
269 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
276 .IF "$(USE_MULTI)" == "define"
277 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
279 .IF "$(USE_PERLIO)" == "define"
280 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
282 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
287 .IF "$(USE_ITHREADS)" == "define"
288 ARCHNAME !:= $(ARCHNAME)-thread
291 # Visual Studio 98 specific
292 .IF "$(CCTYPE)" == "MSVC60"
294 # VC 6.0 can load the socket dll on demand. Makes the test suite
295 # run in about 10% less time.
296 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
298 .IF "$(CFG)" == "Debug"
300 # VC 6.0 seems capable of compiling perl correctly with optimizations
301 # enabled. Anything earlier fails tests.
306 ARCHDIR = ..\lib\$(ARCHNAME)
307 COREDIR = ..\lib\CORE
308 AUTODIR = ..\lib\auto
312 EXTUTILSDIR = $(LIBDIR)\ExtUtils
315 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
316 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
317 INST_LIB = $(INST_TOP)$(INST_VER)\lib
318 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
319 INST_COREDIR = $(INST_ARCHLIB)\CORE
320 INST_POD = $(INST_LIB)\pod
321 INST_HTML = $(INST_TOP)$(INST_VER)\html
324 # Programs to compile, build .lib files and link
329 .IF "$(CCTYPE)" == "BORLAND"
332 .IF "$(BCCOLD)" != "define"
344 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
345 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
346 DEFINES = -DWIN32 $(CRYPT_FLAG)
347 LOCDEFS = -DPERLDLL -DPERL_CORE
352 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
354 .IF "$(CFG)" == "Debug"
355 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
358 OPTIMIZE = -O2 -D_RTLDLL
362 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
363 $(PCHFLAGS) $(OPTIMIZE)
364 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
368 .IF "$(BCCOLD)" != "define"
370 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
372 .IF "$(BCCVCL)" == "define"
373 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
374 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
378 .ELIF "$(CCTYPE)" == "GCC"
382 .IF "$(USE_GCC_V3_2)" == "define"
397 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
398 DEFINES = -DWIN32 $(CRYPT_FLAG)
399 LOCDEFS = -DPERLDLL -DPERL_CORE
406 LIBFILES = $(CRYPT_LIB) $(LIBC) \
407 -lmoldname -lkernel32 -luser32 -lgdi32 \
408 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
409 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
410 -lwinmm -lversion -lodbc32
412 .IF "$(CFG)" == "Debug"
413 OPTIMIZE = -g -O2 -DDEBUGGING
420 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
421 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
426 # NOTE: we assume that GCC uses MSVCRT.DLL
427 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
433 LIB32 = $(LINK32) -lib
440 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
441 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
442 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
443 LOCDEFS = -DPERLDLL -DPERL_CORE
447 .IF "$(USE_PERLCRT)" != "define"
456 .IF "$(CFG)" == "Debug"
457 .IF "$(CCTYPE)" == "MSVC20"
458 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
460 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
464 OPTIMIZE = -MD -DNDEBUG
466 .IF "$(WIN64)" == "define"
467 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
471 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
477 .IF "$(WIN64)" == "define"
478 DEFINES += -DWIN64 -DCONSERVATIVE
479 OPTIMIZE += -Wp64 -Op
482 .IF "$(USE_PERLCRT)" != "define"
483 BUILDOPT += -DPERL_MSVCRT_READFIX
486 LIBBASEFILES = $(CRYPT_LIB) \
487 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
488 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
489 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
492 # win64 doesn't have some libs
493 .IF "$(WIN64)" != "define"
494 LIBBASEFILES += odbc32.lib odbccp32.lib
497 # we add LIBC here, since we may be using PerlCRT.dll
498 LIBFILES = $(LIBBASEFILES) $(LIBC)
500 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
501 $(PCHFLAGS) $(OPTIMIZE)
502 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
503 -libpath:"$(INST_COREDIR)" \
504 -machine:$(PROCESSOR_ARCHITECTURE)
511 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
513 # used to allow local linking flags that are not propogated into Config.pm,
517 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
519 #################### do not edit below this line #######################
520 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
532 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
535 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
538 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
544 .IF "$(CCTYPE)" == "BORLAND"
545 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
546 $(IMPLIB) $(*B).lib $@
547 .ELIF "$(CCTYPE)" == "GCC"
548 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
549 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
551 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
552 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
560 MINIPERL = ..\miniperl.exe
562 PERLEXE = ..\perl.exe
563 WPERLEXE = ..\wperl.exe
564 GLOBEXE = ..\perlglob.exe
565 CONFIGPM = ..\lib\Config.pm
566 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
569 # Nominate a target which causes extensions to be re-built
570 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
571 # on and really only the interface - i.e. the .def file used to export symbols
573 PERLDEP = perldll.def
576 PL2BAT = bin\pl2bat.pl
577 GLOBBAT = bin\perlglob.bat
606 ..\lib\ExtUtils\xsubpp \
613 .IF "$(CCTYPE)" == "BORLAND"
615 CFGSH_TMPL = config.bc
616 CFGH_TMPL = config_H.bc
618 .ELIF "$(CCTYPE)" == "GCC"
620 CFGSH_TMPL = config.gc
621 CFGH_TMPL = config_H.gc
622 PERLIMPLIB = ..\libperl59$(a)
626 .IF "$(WIN64)" == "define"
627 CFGSH_TMPL = config.vc64
628 CFGH_TMPL = config_H.vc64
630 CFGSH_TMPL = config.vc
631 CFGH_TMPL = config_H.vc
636 # makedef.pl must be updated if this changes, and this should normally
637 # only change when there is an incompatible revision of the public API.
638 PERLIMPLIB *= ..\perl59$(a)
639 PERLDLL = ..\perl59.dll
641 XCOPY = xcopy /f /r /i /d
642 RCOPY = xcopy /f /r /i /e /d
646 # filenames given to xsubpp must have forward slashes (since it puts
647 # full pathnames in #line strings)
648 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
687 EXTRACORE_SRC += perllib.c
689 .IF "$(PERL_MALLOC)" == "define"
690 EXTRACORE_SRC += ..\malloc.c
693 EXTRACORE_SRC += ..\perlio.c
700 # We need this for miniperl build unless we override canned
701 # config.h #define building mini\*
702 #.IF "$(USE_PERLIO)" == "define"
703 WIN32_SRC += .\win32io.c
706 .IF "$(CRYPT_SRC)" != ""
707 WIN32_SRC += .\$(CRYPT_SRC)
710 DLL_SRC = $(DYNALOADER).c
756 .\include\sys\socket.h \
759 CORE_H = $(CORE_NOCFG_H) .\config.h
761 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
762 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
763 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
764 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
765 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
766 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
767 DLL_OBJ = $(DLL_SRC:db:+$(o))
768 X2P_OBJ = $(X2P_SRC:db:+$(o))
770 PERLDLL_OBJ = $(CORE_OBJ)
771 PERLEXE_OBJ = perlmain$(o)
773 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
775 .IF "$(USE_SETARGV)" != ""
776 SETARGV_OBJ = setargv$(o)
779 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
780 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
781 Sys/Hostname Storable Filter/Util/Call Encode \
782 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
784 STATIC_EXT = DynaLoader
787 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
789 POD2HTML = $(PODDIR)\pod2html
790 POD2MAN = $(PODDIR)\pod2man
791 POD2LATEX = $(PODDIR)\pod2latex
792 POD2TEXT = $(PODDIR)\pod2text
794 # vars must be separated by "\t+~\t+", since we're using the tempfile
795 # version of config_sh.pl (we were overflowing someone's buffer by
796 # trying to fit them all on the command line)
799 INST_DRV=$(INST_DRV) ~ \
800 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
801 INST_VER=$(INST_VER:s/\/\\/) ~ \
802 INST_ARCH=$(INST_ARCH) ~ \
803 archname=$(ARCHNAME) ~ \
806 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
807 cf_email=$(EMAIL) ~ \
808 d_crypt=$(D_CRYPT) ~ \
809 d_mymalloc=$(PERL_MALLOC) ~ \
810 libs=$(LIBFILES:f) ~ \
811 incpath=$(CCINCDIR:s/\/\\/) ~ \
812 libperl=$(PERLIMPLIB:f) ~ \
813 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
820 static_ext=$(STATIC_EXT) ~ \
821 useithreads=$(USE_ITHREADS) ~ \
822 usemultiplicity=$(USE_MULTI) ~ \
823 useperlio=$(USE_PERLIO) ~ \
824 uselargefiles=$(USE_LARGE_FILES) ~ \
825 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
829 # set up targets varying between Win95 and WinNT builds
832 .IF "$(IS_WIN95)" == "define"
834 RIGHTMAKE = __switch_makefiles
845 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
846 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
849 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
851 #----------------------------------------------------------------
853 #-------------------- BEGIN Win95 SPECIFIC ----------------------
855 # this target is a jump-off point for Win95
856 # 1. it switches to the Win95-specific makefile if it exists
857 # (__do_switch_makefiles)
858 # 2. it prints a message when the Win95-specific one finishes (__done)
859 # 3. it then kills this makefile by trying to make __no_such_target
861 __switch_makefiles: __do_switch_makefiles __done __no_such_target
863 __do_switch_makefiles:
864 .IF "$(NOTFIRST)" != "true"
865 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
870 .IF "$(NOTFIRST)" != "true"
872 @echo Build process complete. Ignore any errors after this message.
873 @echo Run "dmake test" to test and "dmake install" to install
876 # dummy targets for Win95-specific makefile
886 # This target is used to generate the new makefile (.\makefile.95) for Win95
888 .\makefile.95: .\makefile.mk
889 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
891 #--------------------- END Win95 SPECIFIC ---------------------
893 # a blank target for when builds don't need to do certain things
894 # this target added for Win95 port but used to keep the WinNT port able to
899 $(GLOBEXE) : perlglob$(o)
900 .IF "$(CCTYPE)" == "BORLAND"
901 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
902 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
903 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
904 .ELIF "$(CCTYPE)" == "GCC"
905 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
907 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
908 perlglob$(o) setargv$(o)
911 perlglob$(o) : perlglob.c
913 config.w32 : $(CFGSH_TMPL)
914 copy $(CFGSH_TMPL) config.w32
916 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
918 copy $(CFGH_TMPL) config.h
920 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
921 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
922 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
924 # this target is for when changes to the main config.sh happen
925 # edit config.{b,v,g}c and make this target once for each supported
926 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
928 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
929 $(CFGSH_TMPL) > ..\config.sh
930 -cd .. && del /f perl.exe
931 -cd .. && del /f perl*.dll
932 cd .. && perl configpm
935 -perl config_h.PL "INST_VER=$(INST_VER)"
936 rename config.h $(CFGH_TMPL)
938 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
939 cd .. && miniperl configpm
940 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
941 $(XCOPY) ..\*.h $(COREDIR)\*.*
942 $(XCOPY) *.h $(COREDIR)\*.*
943 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
944 $(RCOPY) include $(COREDIR)\*.*
945 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
946 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
948 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
949 .IF "$(CCTYPE)" == "BORLAND"
950 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
951 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
952 .ELIF "$(CCTYPE)" == "GCC"
953 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
954 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
956 $(LINK32) -subsystem:console -out:$@ \
957 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
961 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
963 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
964 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
966 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
967 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
969 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
970 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
971 # unless the .IF is true), so instead we use a .ELSE with the default.
972 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
974 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
975 .IF "$(USE_IMP_SYS)" == "define"
976 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
978 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
981 # 1. we don't want to rebuild miniperl.exe when config.h changes
982 # 2. we don't want to rebuild miniperl.exe with non-default config.h
983 $(MINI_OBJ) : $(CORE_NOCFG_H)
985 $(WIN32_OBJ) : $(CORE_H)
986 $(CORE_OBJ) : $(CORE_H)
987 $(DLL_OBJ) : $(CORE_H)
988 $(X2P_OBJ) : $(CORE_H)
990 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
991 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
992 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
994 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
995 .IF "$(CCTYPE)" == "BORLAND"
996 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
997 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1002 .ELIF "$(CCTYPE)" == "GCC"
1003 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1004 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1005 dlltool --output-lib $(PERLIMPLIB) \
1006 --dllname $(PERLDLL:b).dll \
1008 --base-file perl.base \
1009 --output-exp perl.exp
1010 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1011 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1014 $(LINK32) -dll -def:perldll.def -out:$@ \
1015 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1016 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1018 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1020 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1021 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1023 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1024 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1026 ..\x2p\hash$(o) : ..\x2p\hash.c
1027 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1029 ..\x2p\str$(o) : ..\x2p\str.c
1030 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1032 ..\x2p\util$(o) : ..\x2p\util.c
1033 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1035 ..\x2p\walk$(o) : ..\x2p\walk.c
1036 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1038 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1039 $(MINIPERL) ..\x2p\find2perl.PL
1040 $(MINIPERL) ..\x2p\s2p.PL
1041 .IF "$(CCTYPE)" == "BORLAND"
1042 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1043 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1044 .ELIF "$(CCTYPE)" == "GCC"
1045 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1046 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1048 $(LINK32) -subsystem:console -out:$@ \
1049 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1052 perlmain.c : runperl.c
1053 copy runperl.c perlmain.c
1055 perlmain$(o) : perlmain.c
1056 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1058 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1059 .IF "$(CCTYPE)" == "BORLAND"
1060 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1061 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1063 $(PERLIMPLIB) $(LIBFILES)\n)
1064 .ELIF "$(CCTYPE)" == "GCC"
1065 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1066 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1068 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1069 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1071 copy $(PERLEXE) $(WPERLEXE)
1072 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1073 copy splittree.pl ..
1074 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1076 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1077 if not exist $(AUTODIR) mkdir $(AUTODIR)
1078 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1079 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1080 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1081 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1082 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1083 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1085 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1086 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1088 #----------------------------------------------------------------------------------
1089 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1090 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1093 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1095 #----------------------------------------------------------------------------------
1099 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1100 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1101 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1103 utils: $(PERLEXE) $(X2P)
1104 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1105 copy ..\README.aix ..\pod\perlaix.pod
1106 copy ..\README.amiga ..\pod\perlamiga.pod
1107 copy ..\README.apollo ..\pod\perlapollo.pod
1108 copy ..\README.beos ..\pod\perlbeos.pod
1109 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1110 copy ..\README.ce ..\pod\perlce.pod
1111 copy ..\README.cygwin ..\pod\perlcygwin.pod
1112 copy ..\README.dgux ..\pod\perldgux.pod
1113 copy ..\README.dos ..\pod\perldos.pod
1114 copy ..\README.epoc ..\pod\perlepoc.pod
1115 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1116 copy ..\README.hpux ..\pod\perlhpux.pod
1117 copy ..\README.hurd ..\pod\perlhurd.pod
1118 copy ..\README.irix ..\pod\perlirix.pod
1119 copy ..\README.machten ..\pod\perlmachten.pod
1120 copy ..\README.macos ..\pod\perlmacos.pod
1121 copy ..\README.mint ..\pod\perlmint.pod
1122 copy ..\README.mpeix ..\pod\perlmpeix.pod
1123 copy ..\README.netware ..\pod\perlnetware.pod
1124 copy ..\README.os2 ..\pod\perlos2.pod
1125 copy ..\README.os390 ..\pod\perlos390.pod
1126 copy ..\README.os400 ..\pod\perlos400.pod
1127 copy ..\README.plan9 ..\pod\perlplan9.pod
1128 copy ..\README.qnx ..\pod\perlqnx.pod
1129 copy ..\README.solaris ..\pod\perlsolaris.pod
1130 copy ..\README.tru64 ..\pod\perltru64.pod
1131 copy ..\README.uts ..\pod\perluts.pod
1132 copy ..\README.vmesa ..\pod\perlvmesa.pod
1133 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1134 copy ..\README.vos ..\pod\perlvos.pod
1135 copy ..\README.win32 ..\pod\perlwin32.pod
1136 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1137 cd ..\lib && $(PERLEXE) lib_pm.PL
1138 $(PERLEXE) $(PL2BAT) $(UTILS)
1141 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1142 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1144 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1145 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1146 -del /f $(LIBDIR)\XSLoader.pm
1147 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1148 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1149 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1150 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1151 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1152 -del /f $(LIBDIR)\PerlIO\scalar.pm
1153 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1154 -del /f $(LIBDIR)\File\Glob.pm
1155 -del /f $(LIBDIR)\Storable.pm
1156 -del /f $(LIBDIR)\Filter\Util\Call.pm
1157 -del /f $(LIBDIR)\Digest\MD5.pm
1158 -del /f $(LIBDIR)\MIME\Base64.pm
1159 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1160 -del /f $(LIBDIR)\Time\HiRes.pm
1161 -del /f $(LIBDIR)\List\Util.pm
1162 -del /f $(LIBDIR)\Scalar\Util.pm
1163 -del /f $(LIBDIR)\Unicode\Normalize.pm
1164 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1165 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1166 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1167 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1168 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1169 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1170 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1171 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1172 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1173 -if exist $(LIBDIR)\Digest rmdir /s $(LIBDIR)\Digest
1174 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1175 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1176 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1177 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1178 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1179 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1180 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1181 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1182 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1183 perlaix.pod perlamiga.pod perlapollo.pod \
1184 perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1185 perldos.pod perlepoc.pod perlfreebsd.pod perlhpux.pod perlhurd.pod \
1186 perlirix.pod perlmachten.pod perlmint.pod \
1187 perlmacos.pod perlmpeix.pod perlnetware.pod \
1188 perlos2.pod perlos390.pod perlos400.pod \
1189 perlplan9.pod perlqnx.pod \
1190 perlsolaris.pod perltru64.pod perluts.pod \
1191 perlvmesa.pod perlvms.pod perlvos.pod \
1192 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1193 podchecker podselect
1194 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1195 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat
1196 -cd ..\x2p && del /f find2perl s2p psed *.bat
1197 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1200 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1201 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1202 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1203 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1204 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1205 -if exist $(COREDIR) rmdir /s $(COREDIR)
1207 install : all installbare installhtml
1209 installbare : $(RIGHTMAKE) utils
1210 $(PERLEXE) ..\installperl
1211 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1212 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1213 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1216 $(RCOPY) html\*.* $(INST_HTML)\*.*
1218 inst_lib : $(CONFIGPM)
1219 copy splittree.pl ..
1220 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1221 $(RCOPY) ..\lib $(INST_LIB)\*.*
1223 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1224 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1225 .IF "$(CCTYPE)" == "BORLAND"
1226 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1228 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1233 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1235 test-prep : all utils
1236 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1237 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1238 .IF "$(CCTYPE)" == "BORLAND"
1239 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1241 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1244 test : $(RIGHTMAKE) test-prep
1245 cd ..\t && $(PERLEXE) -I..\lib harness
1247 test-notty : test-prep
1248 set PERL_SKIP_TTY_TEST=1 && \
1249 cd ..\t && $(PERLEXE) -I.\lib harness
1251 test-wide : test-prep
1252 set HARNESS_PERL_SWITCHES=-C && \
1253 cd ..\t && $(PERLEXE) -I..\lib harness
1255 test-wide-notty : test-prep
1256 set PERL_SKIP_TTY_TEST=1 && \
1257 set HARNESS_PERL_SWITCHES=-C && \
1258 cd ..\t && $(PERLEXE) -I..\lib harness
1260 _test : $(RIGHTMAKE)
1261 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1262 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1263 .IF "$(CCTYPE)" == "BORLAND"
1264 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1266 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1268 cd ..\t && $(PERLEXE) -I..\lib harness
1270 clean : Extensions_clean
1271 -@erase miniperlmain$(o)
1273 -@erase perlglob$(o)
1274 -@erase perlmain$(o)
1282 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1283 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1284 -@erase $(WIN32_OBJ)
1287 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1288 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1289 -@erase ..\x2p\*.exe ..\x2p\*.bat
1293 # Handy way to run perlbug -ok without having to install and run the
1294 # installed perlbug. We don't re-run the tests here - we trust the user.
1295 # Please *don't* use this unless all tests pass.
1296 # If you want to report test failures, use "dmake nok" instead.
1298 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1301 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1304 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1307 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok