2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # Borland C++ 5.02 or better
6 # Mingw32 with gcc-2.95.2 or better
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual Studio 98)
101 # Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
105 # Borland 5.02 or later
107 # MinGW with gcc-2.95.2 or later
111 # uncomment this if your Borland compiler is older than v5.4.
114 # uncomment this if you want to use Borland's VCL as your CRT
118 # uncomment this if you are compiling under Windows 95/98 and command.com
119 # (not needed if you're running under 4DOS/NT 6.01 or later)
123 # uncomment next line if you want debug version of perl (big,slow)
124 # If not enabled, we automatically try to use maximum optimization
125 # with all compilers that are known to have a working optimizer.
130 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
131 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
132 # This currently requires VC 5.0 with Service Pack 3 or later.
133 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
134 # and follow the directions in the package to install.
136 # Not recommended if you have VC 6.x and you're not running Windows 9x.
138 #USE_PERLCRT *= define
141 # uncomment to enable linking with setargv.obj under the Visual C
142 # compiler. Setting this options enables perl to expand wildcards in
143 # arguments, but it may be harder to use alternate methods like
144 # File::DosGlob that are more powerful. This option is supported only with
147 #USE_SETARGV *= define
150 # if you want to have the crypt() builtin function implemented, leave this or
151 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
152 # version of des_fcrypt().
154 CRYPT_SRC *= fcrypt.c
157 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
158 # library, uncomment this, and make sure the library exists (see README.win32)
159 # Specify the full pathname of the library.
161 #CRYPT_LIB *= fcrypt.lib
164 # set this if you wish to use perl's malloc
165 # WARNING: Turning this on/off WILL break binary compatibility with extensions
166 # you may have compiled with/without it. Be prepared to recompile all
167 # extensions if you change the default. Currently, this cannot be enabled
168 # if you ask for USE_IMP_SYS above.
170 #PERL_MALLOC *= define
173 # set this to enable debugging mstats
174 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
175 # be enabled without PERL_MALLOC as well.
177 #DEBUG_MSTATS *= define
180 # set the install locations of the compiler include/libraries
181 # Running VCVARS32.BAT is *required* when using Visual C.
182 # Some versions of Visual C don't define MSVCDIR in the environment,
183 # so you may have to set CCHOME explicitly (spaces in the path name should
186 .IF "$(CCTYPE)" == "BORLAND"
187 CCHOME *= C:\Borland\BCC55
188 .ELIF "$(CCTYPE)" == "GCC"
193 CCINCDIR *= $(CCHOME)\include
194 CCLIBDIR *= $(CCHOME)\lib
197 # Additional compiler flags can be specified here.
199 BUILDOPT *= $(BUILDOPTEXTRA)
202 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
203 # internal hash function unless the PERL_HASH_SEED environment variable is set.
204 # Alternatively, adding -DNO_HASH_SEED will completely disable the
205 # randomization feature.
206 # The latter is required to maintain binary compatibility with Perl 5.8.0.
208 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
209 #BUILDOPT += -DNO_HASH_SEED
212 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
213 # for old symbols by default, at the expense of extreme pollution. You most
214 # probably just want to build modules that won't compile with
215 # perl Makefile.PL POLLUTE=1
216 # instead of enabling this. Please report such modules to the respective
219 #BUILDOPT += -DPERL_POLLUTE
222 # This should normally be disabled. Enabling it will disable the File::Glob
223 # implementation of CORE::glob.
225 #BUILDOPT += -DPERL_EXTERNAL_GLOB
228 # This should normally be disabled. Enabling it causes perl to read scripts
229 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
231 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
234 # specify semicolon-separated list of extra directories that modules will
235 # look for libraries (spaces in path names need not be quoted)
240 # set this to point to cmd.exe (only needed if you use some
241 # alternate shell that doesn't grok cmd.exe style commands)
243 #SHELL *= g:\winnt\system32\cmd.exe
246 # set this to your email address (perl will guess a value from
247 # from your loginname and your hostname, which may not be right)
252 ## Build configuration ends.
255 ##################### CHANGE THESE ONLY IF YOU MUST #####################
257 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
261 CRYPT_FLAG = -DHAVE_DES_FCRYPT
265 DEBUG_MSTATS *= undef
267 USE_SITECUST *= undef
269 USE_ITHREADS *= undef
272 USE_LARGE_FILES *= undef
275 .IF "$(USE_IMP_SYS)" == "define"
279 .IF "$(PERL_MALLOC)" == "undef"
283 .IF "$(DEBUG_MSTATS)" == "define"
284 BUILDOPT += -DPERL_DEBUGGING_MSTATS
287 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
291 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
295 .IF "$(USE_SITECUST)" == "define"
296 BUILDOPT += -DUSE_SITECUSTOMIZE
299 .IF "$(USE_MULTI)" != "undef"
300 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
303 .IF "$(USE_IMP_SYS)" != "undef"
304 BUILDOPT += -DPERL_IMPLICIT_SYS
307 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
309 PROCESSOR_ARCHITECTURE *= x86
312 # When we are running from a 32bit cmd.exe on AMD64 then
313 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
315 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
316 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
318 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
325 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
326 .IF "$(ARCHITECTURE)" == "AMD64"
329 .IF "$(ARCHITECTURE)" == "IA64"
333 .IF "$(USE_MULTI)" == "define"
334 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
336 .IF "$(USE_PERLIO)" == "define"
337 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
339 ARCHNAME = MSWin32-$(ARCHITECTURE)
343 .IF "$(USE_ITHREADS)" == "define"
344 ARCHNAME !:= $(ARCHNAME)-thread
347 # Visual Studio 98 and .NET 2003 specific
348 # VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
349 # about 10% less time. (The free version of 7.x can't do this, however.)
350 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70"
351 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
354 ARCHDIR = ..\lib\$(ARCHNAME)
355 COREDIR = ..\lib\CORE
356 AUTODIR = ..\lib\auto
360 EXTUTILSDIR = $(LIBDIR)\ExtUtils
364 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
365 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
366 INST_LIB = $(INST_TOP)$(INST_VER)\lib
367 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
368 INST_COREDIR = $(INST_ARCHLIB)\CORE
369 INST_HTML = $(INST_TOP)$(INST_VER)\html
372 # Programs to compile, build .lib files and link
377 .IF "$(CCTYPE)" == "BORLAND"
380 .IF "$(BCCOLD)" != "define"
392 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
393 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
394 DEFINES = -DWIN32 $(CRYPT_FLAG)
395 LOCDEFS = -DPERLDLL -DPERL_CORE
401 # same libs as MSVC, except Borland doesn't have oldnames.lib
402 LIBFILES = $(CRYPT_LIB) \
403 kernel32.lib user32.lib gdi32.lib winspool.lib \
404 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
405 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
406 version.lib odbc32.lib odbccp32.lib \
409 .IF "$(CFG)" == "Debug"
410 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
413 OPTIMIZE = -O2 -D_RTLDLL
418 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
419 $(PCHFLAGS) $(OPTIMIZE)
420 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
425 .IF "$(BCCOLD)" != "define"
427 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
429 .IF "$(BCCVCL)" == "define"
430 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
431 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
435 .ELIF "$(CCTYPE)" == "GCC"
451 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
452 DEFINES = -DWIN32 $(CRYPT_FLAG)
453 LOCDEFS = -DPERLDLL -DPERL_CORE
460 LIBFILES = $(CRYPT_LIB) $(LIBC) \
461 -lmoldname -lkernel32 -luser32 -lgdi32 \
462 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
463 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
464 -lwinmm -lversion -lodbc32 -lodbccp32
466 .IF "$(CFG)" == "Debug"
467 OPTIMIZE = -g -O2 -DDEBUGGING
475 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
476 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
481 # NOTE: we assume that GCC uses MSVCRT.DLL
482 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
488 LIB32 = $(LINK32) -lib
495 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
496 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
497 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
498 LOCDEFS = -DPERLDLL -DPERL_CORE
502 .IF "$(USE_PERLCRT)" != "define"
508 .IF "$(CFG)" == "Debug"
509 .IF "$(CCTYPE)" == "MSVC20"
510 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
512 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
516 OPTIMIZE = -MD -Zi -DNDEBUG
517 # we enable debug symbols in release builds also
518 LINK_DBG = -debug -opt:ref,icf
519 # you may want to enable this if you want COFF symbols in the executables
520 # in addition to the PDB symbols. The default Dr. Watson that ships with
521 # Windows can use the the former but not latter. The free WinDbg can be
522 # installed to get better stack traces from just the PDB symbols, so we
523 # avoid the bloat of COFF symbols by default.
524 #LINK_DBG = $(LINK_DBG) -debugtype:both
525 .IF "$(WIN64)" == "define"
526 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
530 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
536 .IF "$(WIN64)" == "define"
537 DEFINES += -DWIN64 -DCONSERVATIVE
538 OPTIMIZE += -Wp64 -fp:precise
541 .IF "$(USE_PERLCRT)" != "define"
542 BUILDOPT += -DPERL_MSVCRT_READFIX
545 LIBBASEFILES = $(CRYPT_LIB) \
546 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
547 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
548 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
549 version.lib odbc32.lib odbccp32.lib
551 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
552 # include the buffer overrun verification code used by the /GS switch.
553 # Since the code links against libraries that are compiled with /GS, this
554 # "security cookie verification" must be included via bufferoverlow.lib.
555 .IF "$(WIN64)" == "define"
556 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
559 # we add LIBC here, since we may be using PerlCRT.dll
560 LIBFILES = $(LIBBASEFILES) $(LIBC)
562 EXTRACFLAGS = -nologo -GF -W3
563 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
564 $(PCHFLAGS) $(OPTIMIZE)
565 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
566 -libpath:"$(INST_COREDIR)" \
567 -machine:$(PROCESSOR_ARCHITECTURE)
574 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
576 # used to allow local linking flags that are not propogated into Config.pm,
580 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
582 #################### do not edit below this line #######################
583 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
585 # Some dmake's built with Borland C++, including Sarathy's one at:
586 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
587 # require backslashes to be doubled-up when written to $(mktmp) files.
588 # Other dmake's do not require this and would actually output a double
589 # backslash if they were doubled-up.
590 .IF "$(shell @type $(mktmp \\))"=="\\"
596 # There is a related issue with other escape sequences: Sarathy's old
597 # dmake automatically maps escape sequences like \n to their ASCII values
598 # when used in macros, while other dmake's only do so if this behaviour
599 # is explicitly requested with the :m modifier.
601 .IF "$(shell @type $(mktmp \n))"=="\n"
617 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
620 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
623 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
629 .IF "$(CCTYPE)" == "BORLAND"
630 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
631 $(IMPLIB) $(*B).lib $@
632 .ELIF "$(CCTYPE)" == "GCC"
633 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
634 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
636 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
637 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
641 .IF "$(CCTYPE)" == "GCC"
642 $(RSC) --use-temp-file -i $< -o $@
649 MINIPERL = ..\miniperl.exe
651 PERLEXE = ..\perl.exe
652 WPERLEXE = ..\wperl.exe
653 GLOBEXE = ..\perlglob.exe
654 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
655 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
658 # Unicode data files generated by mktables
659 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
660 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
661 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
662 ..\lib\unicore\PVA.pl
664 # Directories of Unicode data files generated by mktables
665 UNIDATADIR1 = ..\lib\unicore\To
666 UNIDATADIR2 = ..\lib\unicore\lib
668 PERLEXE_ICO = .\perlexe.ico
669 PERLEXE_RES = .\perlexe.res
672 # Nominate a target which causes extensions to be re-built
673 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
674 # on and really only the interface - i.e. the .def file used to export symbols
676 PERLDEP = perldll.def
679 PL2BAT = bin\pl2bat.pl
680 GLOBBAT = bin\perlglob.bat
696 ..\utils\config_data \
722 .IF "$(CCTYPE)" == "BORLAND"
724 CFGSH_TMPL = config.bc
725 CFGH_TMPL = config_H.bc
727 .ELIF "$(CCTYPE)" == "GCC"
729 CFGSH_TMPL = config.gc
730 CFGH_TMPL = config_H.gc
731 PERLIMPLIB = ..\libperl59$(a)
735 .IF "$(WIN64)" == "define"
736 CFGSH_TMPL = config.vc64
737 CFGH_TMPL = config_H.vc64
739 CFGSH_TMPL = config.vc
740 CFGH_TMPL = config_H.vc
745 # makedef.pl must be updated if this changes, and this should normally
746 # only change when there is an incompatible revision of the public API.
747 PERLIMPLIB *= ..\perl59$(a)
748 PERLDLL = ..\perl59.dll
750 XCOPY = xcopy /f /r /i /d /y
751 RCOPY = xcopy /f /r /i /e /d /y
755 # filenames given to xsubpp must have forward slashes (since it puts
756 # full pathnames in #line strings)
757 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
797 EXTRACORE_SRC += perllib.c
799 .IF "$(PERL_MALLOC)" == "define"
800 EXTRACORE_SRC += ..\malloc.c
803 EXTRACORE_SRC += ..\perlio.c
810 # We need this for miniperl build unless we override canned
811 # config.h #define building mini\*
812 #.IF "$(USE_PERLIO)" == "define"
813 WIN32_SRC += .\win32io.c
816 .IF "$(CRYPT_SRC)" != ""
817 WIN32_SRC += .\$(CRYPT_SRC)
820 DLL_SRC = $(DYNALOADER).c
867 .\include\sys\socket.h \
870 CORE_H = $(CORE_NOCFG_H) .\config.h
872 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
873 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
874 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
875 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
876 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
877 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
878 DLL_OBJ = $(DLL_SRC:db:+$(o))
879 X2P_OBJ = $(X2P_SRC:db:+$(o))
881 PERLDLL_OBJ = $(CORE_OBJ)
882 PERLEXE_OBJ = perlmain$(o)
884 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
886 .IF "$(USE_SETARGV)" != ""
887 SETARGV_OBJ = setargv$(o)
890 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
891 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
892 Sys/Hostname Storable Filter/Util/Call Encode \
893 Digest/MD5 Digest/SHA PerlIO/scalar MIME/Base64 Time/HiRes \
894 Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32 \
899 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
901 # vars must be separated by "\t+~\t+", since we're using the tempfile
902 # version of config_sh.pl (we were overflowing someone's buffer by
903 # trying to fit them all on the command line)
906 INST_DRV=$(INST_DRV) ~ \
907 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
908 INST_VER=$(INST_VER:s,\,$B,) ~ \
909 INST_ARCH=$(INST_ARCH) ~ \
910 archname=$(ARCHNAME) ~ \
913 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
914 cf_email=$(EMAIL) ~ \
915 d_crypt=$(D_CRYPT) ~ \
916 d_mymalloc=$(PERL_MALLOC) ~ \
917 libs=$(LIBFILES:f) ~ \
918 incpath=$(CCINCDIR:s,\,$B,) ~ \
919 libperl=$(PERLIMPLIB:f) ~ \
920 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
927 static_ext=$(STATIC_EXT) ~ \
928 usethreads=$(USE_ITHREADS) ~ \
929 useithreads=$(USE_ITHREADS) ~ \
930 usemultiplicity=$(USE_MULTI) ~ \
931 useperlio=$(USE_PERLIO) ~ \
932 uselargefiles=$(USE_LARGE_FILES) ~ \
933 usesitecustomize=$(USE_SITECUST) ~ \
934 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
938 # set up targets varying between Win95 and WinNT builds
941 .IF "$(IS_WIN95)" == "define"
943 RIGHTMAKE = __switch_makefiles
949 .IMPORT .IGNORE : SystemRoot windir
951 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
952 ENV_OS=$(subst,OS=, $(shell @set OS))
954 .IF "$(ENV_OS)" == "Windows_NT"
955 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
957 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
964 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
965 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
966 $(X2P) MakePPPort Extensions
968 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
970 #----------------------------------------------------------------
972 #-------------------- BEGIN Win95 SPECIFIC ----------------------
974 # this target is a jump-off point for Win95
975 # 1. it switches to the Win95-specific makefile if it exists
976 # (__do_switch_makefiles)
977 # 2. it prints a message when the Win95-specific one finishes (__done)
978 # 3. it then kills this makefile by trying to make __no_such_target
980 __switch_makefiles: __do_switch_makefiles __done __no_such_target
982 __do_switch_makefiles:
983 .IF "$(NOTFIRST)" != "true"
984 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
989 .IF "$(NOTFIRST)" != "true"
991 @echo Build process complete. Ignore any errors after this message.
992 @echo Run "dmake test" to test and "dmake install" to install
995 # dummy targets for Win95-specific makefile
1005 # This target is used to generate the new makefile (.\makefile.95) for Win95
1007 .\makefile.95: .\makefile.mk
1008 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1010 #--------------------- END Win95 SPECIFIC ---------------------
1012 # a blank target for when builds don't need to do certain things
1013 # this target added for Win95 port but used to keep the WinNT port able to
1018 $(GLOBEXE) : perlglob$(o)
1019 .IF "$(CCTYPE)" == "BORLAND"
1020 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1021 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1022 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1023 .ELIF "$(CCTYPE)" == "GCC"
1024 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1026 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1027 perlglob$(o) setargv$(o)
1030 perlglob$(o) : perlglob.c
1032 config.w32 : $(CFGSH_TMPL)
1033 copy $(CFGSH_TMPL) config.w32
1035 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1037 copy $(CFGH_TMPL) config.h
1039 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1040 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1041 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1043 # this target is for when changes to the main config.sh happen
1044 # edit config.{b,v,g}c and make this target once for each supported
1045 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1047 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1048 $(CFGSH_TMPL) > ..\config.sh
1049 -cd .. && del /f perl.exe
1050 -cd .. && del /f perl*.dll
1051 cd .. && perl configpm
1052 -del /f $(CFGH_TMPL)
1054 -perl config_h.PL "INST_VER=$(INST_VER)"
1055 rename config.h $(CFGH_TMPL)
1057 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1058 cd .. && miniperl configpm
1059 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1060 $(XCOPY) ..\*.h $(COREDIR)\*.*
1061 $(XCOPY) *.h $(COREDIR)\*.*
1062 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1063 $(RCOPY) include $(COREDIR)\*.*
1064 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1065 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1067 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1068 .IF "$(CCTYPE)" == "BORLAND"
1069 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1070 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1071 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1072 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1073 .ELIF "$(CCTYPE)" == "GCC"
1074 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1075 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1077 $(LINK32) -subsystem:console -out:$@ \
1078 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1082 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1084 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1085 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1087 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1088 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1090 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1091 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1092 # unless the .IF is true), so instead we use a .ELSE with the default.
1093 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1095 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1096 .IF "$(USE_IMP_SYS)" == "define"
1097 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1099 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1102 # 1. we don't want to rebuild miniperl.exe when config.h changes
1103 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1104 $(MINI_OBJ) : $(CORE_NOCFG_H)
1106 $(WIN32_OBJ) : $(CORE_H)
1108 $(CORE_OBJ) : $(CORE_H)
1110 $(DLL_OBJ) : $(CORE_H)
1112 $(X2P_OBJ) : $(CORE_H)
1114 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1115 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1116 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1117 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1119 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1120 .IF "$(CCTYPE)" == "BORLAND"
1121 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1122 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
1124 $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
1127 .ELIF "$(CCTYPE)" == "GCC"
1128 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1129 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1130 $(subst,\,$B $(shell @type Extensions_static)) \
1131 $(LIBFILES) $(LKPOST))
1132 dlltool --output-lib $(PERLIMPLIB) \
1133 --dllname $(PERLDLL:b).dll \
1135 --base-file perl.base \
1136 --output-exp perl.exp
1137 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1138 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1139 $(subst,\,$B $(shell @type Extensions_static)) \
1140 $(LIBFILES) perl.exp $(LKPOST))
1142 $(LINK32) -dll -def:perldll.def -out:$@ \
1143 @Extensions_static \
1144 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1145 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
1147 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1150 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1151 $(MINIPERL) makeico.pl > $@
1153 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1155 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1156 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1158 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1159 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1161 ..\x2p\hash$(o) : ..\x2p\hash.c
1162 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1164 ..\x2p\str$(o) : ..\x2p\str.c
1165 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1167 ..\x2p\util$(o) : ..\x2p\util.c
1168 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1170 ..\x2p\walk$(o) : ..\x2p\walk.c
1171 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1173 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1174 $(MINIPERL) ..\x2p\find2perl.PL
1175 $(MINIPERL) ..\x2p\s2p.PL
1176 .IF "$(CCTYPE)" == "BORLAND"
1177 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1178 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1179 .ELIF "$(CCTYPE)" == "GCC"
1180 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1181 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1183 $(LINK32) -subsystem:console -out:$@ \
1184 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1187 perlmain.c : runperl.c
1188 copy runperl.c perlmain.c
1190 perlmain$(o) : perlmain.c
1191 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1193 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1194 .IF "$(CCTYPE)" == "BORLAND"
1195 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1196 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
1198 $(PERLIMPLIB) $(LIBFILES)$N)
1199 .ELIF "$(CCTYPE)" == "GCC"
1200 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1201 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1203 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1204 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1206 copy $(PERLEXE) $(WPERLEXE)
1207 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1208 copy splittree.pl ..
1209 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1211 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1212 if not exist $(AUTODIR) mkdir $(AUTODIR)
1213 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1214 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1215 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1216 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1217 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1218 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1220 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1221 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1223 MakePPPort: $(MINIPERL) $(CONFIGPM)
1224 $(MINIPERL) -I..\lib ..\mkppport
1227 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1229 #-------------------------------------------------------------------------------
1230 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1231 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1232 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1234 Extensions_static : buildext.pl
1235 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1236 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1237 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1240 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1241 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1243 Extensions_realclean :
1244 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1245 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1247 #-------------------------------------------------------------------------------
1251 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1252 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1253 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1255 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1256 # so please check that script before making structural changes here
1257 utils: $(PERLEXE) $(X2P)
1258 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1259 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1260 copy ..\README.aix ..\pod\perlaix.pod
1261 copy ..\README.amiga ..\pod\perlamiga.pod
1262 copy ..\README.apollo ..\pod\perlapollo.pod
1263 copy ..\README.beos ..\pod\perlbeos.pod
1264 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1265 copy ..\README.ce ..\pod\perlce.pod
1266 copy ..\README.cn ..\pod\perlcn.pod
1267 copy ..\README.cygwin ..\pod\perlcygwin.pod
1268 copy ..\README.dgux ..\pod\perldgux.pod
1269 copy ..\README.dos ..\pod\perldos.pod
1270 copy ..\README.epoc ..\pod\perlepoc.pod
1271 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1272 copy ..\README.hpux ..\pod\perlhpux.pod
1273 copy ..\README.hurd ..\pod\perlhurd.pod
1274 copy ..\README.irix ..\pod\perlirix.pod
1275 copy ..\README.jp ..\pod\perljp.pod
1276 copy ..\README.ko ..\pod\perlko.pod
1277 copy ..\README.linux ..\pod\perllinux.pod
1278 copy ..\README.machten ..\pod\perlmachten.pod
1279 copy ..\README.macos ..\pod\perlmacos.pod
1280 copy ..\README.macosx ..\pod\perlmacosx.pod
1281 copy ..\README.mint ..\pod\perlmint.pod
1282 copy ..\README.mpeix ..\pod\perlmpeix.pod
1283 copy ..\README.netware ..\pod\perlnetware.pod
1284 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1285 copy ..\README.os2 ..\pod\perlos2.pod
1286 copy ..\README.os390 ..\pod\perlos390.pod
1287 copy ..\README.os400 ..\pod\perlos400.pod
1288 copy ..\README.plan9 ..\pod\perlplan9.pod
1289 copy ..\README.qnx ..\pod\perlqnx.pod
1290 copy ..\README.riscos ..\pod\perlriscos.pod
1291 copy ..\README.solaris ..\pod\perlsolaris.pod
1292 copy ..\README.symbian ..\pod\perlsymbian.pod
1293 copy ..\README.tru64 ..\pod\perltru64.pod
1294 copy ..\README.tw ..\pod\perltw.pod
1295 copy ..\README.uts ..\pod\perluts.pod
1296 copy ..\README.vmesa ..\pod\perlvmesa.pod
1297 copy ..\README.vms ..\pod\perlvms.pod
1298 copy ..\README.vos ..\pod\perlvos.pod
1299 copy ..\README.win32 ..\pod\perlwin32.pod
1300 copy ..\pod\perl594delta.pod ..\pod\perldelta.pod
1301 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1302 cd ..\lib && $(PERLEXE) lib_pm.PL
1303 $(PERLEXE) $(PL2BAT) $(UTILS)
1305 # Note that the pod cleanup in this next section is parsed (and regenerated
1306 # by pod/buildtoc so please check that script before making changes here
1308 distclean: realclean
1309 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1310 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1312 -del /f $(DYNALOADER).c
1313 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1314 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1315 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1316 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1317 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1318 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1319 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1320 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1321 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1322 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1323 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1324 -del /f $(LIBDIR)\ByteLoader.pm
1325 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1326 -del /f $(LIBDIR)\Devel\PPPort.pm
1327 -del /f $(LIBDIR)\File\Glob.pm
1328 -del /f $(LIBDIR)\Storable.pm
1329 -del /f $(LIBDIR)\Digest\MD5.pm
1330 -del /f $(LIBDIR)\Digest\SHA.pm
1331 -del /f $(LIBDIR)\PerlIO\encoding.pm
1332 -del /f $(LIBDIR)\PerlIO\scalar.pm
1333 -del /f $(LIBDIR)\PerlIO\via.pm
1334 -del /f $(LIBDIR)\Sys\Hostname.pm
1335 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1336 -del /f $(LIBDIR)\threads\shared.pm
1337 -del /f $(LIBDIR)\Time\HiRes.pm
1338 -del /f $(LIBDIR)\Unicode\Normalize.pm
1339 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1340 -del /f $(LIBDIR)\Win32.pm
1341 -del /f $(LIBDIR)\Win32API\File.pm
1342 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1343 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1344 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1345 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1346 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1347 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1348 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1349 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1350 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1351 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1352 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1353 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1354 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1355 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1356 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1357 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1358 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1359 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1360 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1361 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1362 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1363 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1364 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1365 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1366 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1367 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1368 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1369 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1371 pod2html pod2latex pod2man pod2text pod2usage \
1372 podchecker podselect
1373 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1374 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1375 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1376 -cd ..\x2p && del /f find2perl s2p psed *.bat
1377 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1381 -del /f $(PERLEXE_ICO) perl.base
1382 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1383 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1384 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1385 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1386 -if exist pod2htmd.tmp del pod2htmd.tmp
1387 -if exist pod2htmi.tmp del pod2htmi.tmp
1388 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1390 install : all installbare installhtml
1392 installbare : $(RIGHTMAKE) utils
1393 $(PERLEXE) ..\installperl
1394 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1395 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1396 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1397 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1398 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1401 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1403 inst_lib : $(CONFIGPM)
1404 copy splittree.pl ..
1405 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1406 $(RCOPY) ..\lib $(INST_LIB)\*.*
1408 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1409 cd ..\lib\unicore && \
1410 ..\$(MINIPERL) -I.. mktables
1412 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1413 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1414 if exist ..\t\perl.exe del /f ..\t\perl.exe
1415 rename ..\t\miniperl.exe perl.exe
1416 .IF "$(CCTYPE)" == "BORLAND"
1417 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1419 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1423 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1425 test-prep : all utils
1426 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1427 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1428 .IF "$(CCTYPE)" == "BORLAND"
1429 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1431 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1434 test : $(RIGHTMAKE) test-prep
1435 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1437 test-notty : test-prep
1438 set PERL_SKIP_TTY_TEST=1 && \
1439 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1441 _test : $(RIGHTMAKE)
1442 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1443 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1444 .IF "$(CCTYPE)" == "BORLAND"
1445 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1447 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1449 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1452 -@erase miniperlmain$(o)
1454 -@erase perlglob$(o)
1455 -@erase perlmain$(o)
1463 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1464 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1465 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1466 -@erase $(UNIDATAFILES)
1467 -@erase $(WIN32_OBJ)
1470 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1471 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1472 -@erase ..\x2p\*.exe ..\x2p\*.bat
1476 -@erase Extensions_static
1478 clean : Extensions_clean _clean
1480 realclean : Extensions_realclean MakePPPort_clean _clean
1482 # Handy way to run perlbug -ok without having to install and run the
1483 # installed perlbug. We don't re-run the tests here - we trust the user.
1484 # Please *don't* use this unless all tests pass.
1485 # If you want to report test failures, use "dmake nok" instead.
1487 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1490 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1493 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1496 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok