2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # Borland C++ 5.02 or better
6 # MinGW with gcc-2.95.2 or better
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual C++ 98)
101 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
105 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
106 #CCTYPE *= MSVC80FREE
107 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # Borland 5.02 or later
111 # MinGW with gcc-2.95.2 or later
115 # uncomment this if your Borland compiler is older than v5.4.
118 # uncomment this if you want to use Borland's VCL as your CRT
122 # uncomment this if you are compiling under Windows 95/98 and command.com
123 # (not needed if you're running under 4DOS/NT 6.01 or later)
127 # uncomment next line if you want debug version of perl (big,slow)
128 # If not enabled, we automatically try to use maximum optimization
129 # with all compilers that are known to have a working optimizer.
134 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
135 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
136 # This currently requires VC 5.0 with Service Pack 3 or later.
137 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
138 # and follow the directions in the package to install.
140 # Not recommended if you have VC 6.x and you're not running Windows 9x.
142 #USE_PERLCRT *= define
145 # uncomment to enable linking with setargv.obj under the Visual C
146 # compiler. Setting this options enables perl to expand wildcards in
147 # arguments, but it may be harder to use alternate methods like
148 # File::DosGlob that are more powerful. This option is supported only with
151 #USE_SETARGV *= define
154 # if you want to have the crypt() builtin function implemented, leave this or
155 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
156 # version of des_fcrypt().
158 CRYPT_SRC *= fcrypt.c
161 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
162 # library, uncomment this, and make sure the library exists (see README.win32)
163 # Specify the full pathname of the library.
165 #CRYPT_LIB *= fcrypt.lib
168 # set this if you wish to use perl's malloc
169 # WARNING: Turning this on/off WILL break binary compatibility with extensions
170 # you may have compiled with/without it. Be prepared to recompile all
171 # extensions if you change the default. Currently, this cannot be enabled
172 # if you ask for USE_IMP_SYS above.
174 #PERL_MALLOC *= define
177 # set this to enable debugging mstats
178 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
179 # be enabled without PERL_MALLOC as well.
181 #DEBUG_MSTATS *= define
184 # set the install locations of the compiler include/libraries
185 # Running VCVARS32.BAT is *required* when using Visual C.
186 # Some versions of Visual C don't define MSVCDIR in the environment,
187 # so you may have to set CCHOME explicitly (spaces in the path name should
190 .IF "$(CCTYPE)" == "BORLAND"
191 CCHOME *= C:\Borland\BCC55
192 .ELIF "$(CCTYPE)" == "GCC"
197 CCINCDIR *= $(CCHOME)\include
198 CCLIBDIR *= $(CCHOME)\lib
201 # Additional compiler flags can be specified here.
203 BUILDOPT *= $(BUILDOPTEXTRA)
206 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
207 # internal hash function unless the PERL_HASH_SEED environment variable is set.
208 # Alternatively, adding -DNO_HASH_SEED will completely disable the
209 # randomization feature.
210 # The latter is required to maintain binary compatibility with Perl 5.8.0.
212 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
213 #BUILDOPT += -DNO_HASH_SEED
216 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
217 # for old symbols by default, at the expense of extreme pollution. You most
218 # probably just want to build modules that won't compile with
219 # perl Makefile.PL POLLUTE=1
220 # instead of enabling this. Please report such modules to the respective
223 #BUILDOPT += -DPERL_POLLUTE
226 # This should normally be disabled. Enabling it will disable the File::Glob
227 # implementation of CORE::glob.
229 #BUILDOPT += -DPERL_EXTERNAL_GLOB
232 # This should normally be disabled. Enabling it causes perl to read scripts
233 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
235 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
238 # specify semicolon-separated list of extra directories that modules will
239 # look for libraries (spaces in path names need not be quoted)
244 # set this to point to cmd.exe (only needed if you use some
245 # alternate shell that doesn't grok cmd.exe style commands)
247 #SHELL *= g:\winnt\system32\cmd.exe
250 # set this to your email address (perl will guess a value from
251 # from your loginname and your hostname, which may not be right)
256 ## Build configuration ends.
259 ##################### CHANGE THESE ONLY IF YOU MUST #####################
261 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
265 CRYPT_FLAG = -DHAVE_DES_FCRYPT
269 DEBUG_MSTATS *= undef
271 USE_SITECUST *= undef
273 USE_ITHREADS *= undef
276 USE_LARGE_FILES *= undef
279 .IF "$(USE_IMP_SYS)" == "define"
283 .IF "$(PERL_MALLOC)" == "undef"
287 .IF "$(DEBUG_MSTATS)" == "define"
288 BUILDOPT += -DPERL_DEBUGGING_MSTATS
291 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
295 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
299 .IF "$(USE_SITECUST)" == "define"
300 BUILDOPT += -DUSE_SITECUSTOMIZE
303 .IF "$(USE_MULTI)" != "undef"
304 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
307 .IF "$(USE_IMP_SYS)" != "undef"
308 BUILDOPT += -DPERL_IMPLICIT_SYS
311 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
313 PROCESSOR_ARCHITECTURE *= x86
316 # When we are running from a 32bit cmd.exe on AMD64 then
317 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
319 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
320 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
322 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
329 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
330 .IF "$(ARCHITECTURE)" == "AMD64"
333 .IF "$(ARCHITECTURE)" == "IA64"
337 .IF "$(USE_MULTI)" == "define"
338 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
340 .IF "$(USE_PERLIO)" == "define"
341 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
343 ARCHNAME = MSWin32-$(ARCHITECTURE)
347 .IF "$(USE_ITHREADS)" == "define"
348 ARCHNAME !:= $(ARCHNAME)-thread
351 # Visual C++ 98, .NET 2003 and 2005 specific.
352 # VC++ 6.x, 7.x and 8.x can load DLL's on demand. Makes the test suite run in
353 # about 10% less time. (The free version of 7.x can't do this, but the free
354 # version of 8.x can.)
355 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" \
356 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
357 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
360 ARCHDIR = ..\lib\$(ARCHNAME)
361 COREDIR = ..\lib\CORE
362 AUTODIR = ..\lib\auto
366 EXTUTILSDIR = $(LIBDIR)\ExtUtils
370 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
371 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
372 INST_LIB = $(INST_TOP)$(INST_VER)\lib
373 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
374 INST_COREDIR = $(INST_ARCHLIB)\CORE
375 INST_HTML = $(INST_TOP)$(INST_VER)\html
378 # Programs to compile, build .lib files and link
383 .IF "$(CCTYPE)" == "BORLAND"
386 .IF "$(BCCOLD)" != "define"
398 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
399 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
400 DEFINES = -DWIN32 $(CRYPT_FLAG)
401 LOCDEFS = -DPERLDLL -DPERL_CORE
407 # same libs as MSVC, except Borland doesn't have oldnames.lib
408 LIBFILES = $(CRYPT_LIB) \
409 kernel32.lib user32.lib gdi32.lib winspool.lib \
410 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
411 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
412 version.lib odbc32.lib odbccp32.lib \
415 .IF "$(CFG)" == "Debug"
416 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
419 OPTIMIZE = -O2 -D_RTLDLL
424 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
425 $(PCHFLAGS) $(OPTIMIZE)
426 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
431 .IF "$(BCCOLD)" != "define"
433 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
435 .IF "$(BCCVCL)" == "define"
436 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
437 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
441 .ELIF "$(CCTYPE)" == "GCC"
457 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
458 DEFINES = -DWIN32 $(CRYPT_FLAG)
459 LOCDEFS = -DPERLDLL -DPERL_CORE
466 LIBFILES = $(CRYPT_LIB) $(LIBC) \
467 -lmoldname -lkernel32 -luser32 -lgdi32 \
468 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
469 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
470 -lwinmm -lversion -lodbc32 -lodbccp32
472 .IF "$(CFG)" == "Debug"
473 OPTIMIZE = -g -O2 -DDEBUGGING
481 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
482 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
487 # NOTE: we assume that GCC uses MSVCRT.DLL
488 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
494 LIB32 = $(LINK32) -lib
501 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
502 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
503 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
504 LOCDEFS = -DPERLDLL -DPERL_CORE
508 .IF "$(USE_PERLCRT)" != "define"
514 .IF "$(CFG)" == "Debug"
515 .IF "$(CCTYPE)" == "MSVC20"
516 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
518 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
522 OPTIMIZE = -MD -Zi -DNDEBUG
523 # we enable debug symbols in release builds also
524 LINK_DBG = -debug -opt:ref,icf
525 # you may want to enable this if you want COFF symbols in the executables
526 # in addition to the PDB symbols. The default Dr. Watson that ships with
527 # Windows can use the the former but not latter. The free WinDbg can be
528 # installed to get better stack traces from just the PDB symbols, so we
529 # avoid the bloat of COFF symbols by default.
530 #LINK_DBG = $(LINK_DBG) -debugtype:both
531 .IF "$(WIN64)" == "define"
532 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
536 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
542 .IF "$(WIN64)" == "define"
543 DEFINES += -DWIN64 -DCONSERVATIVE
544 OPTIMIZE += -Wp64 -fp:precise
547 .IF "$(USE_PERLCRT)" != "define"
548 BUILDOPT += -DPERL_MSVCRT_READFIX
551 LIBBASEFILES = $(CRYPT_LIB) \
552 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
553 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
554 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
555 version.lib odbc32.lib odbccp32.lib
557 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
558 # include the buffer overrun verification code used by the /GS switch.
559 # Since the code links against libraries that are compiled with /GS, this
560 # "security cookie verification" must be included via bufferoverlow.lib.
561 .IF "$(WIN64)" == "define"
562 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
565 # we add LIBC here, since we may be using PerlCRT.dll
566 LIBFILES = $(LIBBASEFILES) $(LIBC)
568 EXTRACFLAGS = -nologo -GF -W3
569 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
570 $(PCHFLAGS) $(OPTIMIZE)
571 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
572 -libpath:"$(INST_COREDIR)" \
573 -machine:$(PROCESSOR_ARCHITECTURE)
580 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
582 # used to allow local linking flags that are not propogated into Config.pm,
586 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
588 #################### do not edit below this line #######################
589 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
591 # Some dmake's built with Borland C++, including Sarathy's one at:
592 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
593 # require backslashes to be doubled-up when written to $(mktmp) files.
594 # Other dmake's do not require this and would actually output a double
595 # backslash if they were doubled-up.
596 .IF "$(shell @type $(mktmp \\))"=="\\"
602 # There is a related issue with other escape sequences: Sarathy's old
603 # dmake automatically maps escape sequences like \n to their ASCII values
604 # when used in macros, while other dmake's only do so if this behaviour
605 # is explicitly requested with the :m modifier.
607 .IF "$(shell @type $(mktmp \n))"=="\n"
623 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
626 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
629 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
635 .IF "$(CCTYPE)" == "BORLAND"
636 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
637 $(IMPLIB) $(*B).lib $@
638 .ELIF "$(CCTYPE)" == "GCC"
639 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
640 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
642 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
643 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
647 .IF "$(CCTYPE)" == "GCC"
648 $(RSC) --use-temp-file -i $< -o $@
655 MINIPERL = ..\miniperl.exe
657 PERLEXE = ..\perl.exe
658 WPERLEXE = ..\wperl.exe
659 GLOBEXE = ..\perlglob.exe
660 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
661 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
664 # Unicode data files generated by mktables
665 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
666 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
667 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
668 ..\lib\unicore\PVA.pl
670 # Directories of Unicode data files generated by mktables
671 UNIDATADIR1 = ..\lib\unicore\To
672 UNIDATADIR2 = ..\lib\unicore\lib
674 PERLEXE_ICO = .\perlexe.ico
675 PERLEXE_RES = .\perlexe.res
678 # Nominate a target which causes extensions to be re-built
679 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
680 # on and really only the interface - i.e. the .def file used to export symbols
682 PERLDEP = perldll.def
685 PL2BAT = bin\pl2bat.pl
686 GLOBBAT = bin\perlglob.bat
702 ..\utils\config_data \
728 .IF "$(CCTYPE)" == "BORLAND"
730 CFGSH_TMPL = config.bc
731 CFGH_TMPL = config_H.bc
733 .ELIF "$(CCTYPE)" == "GCC"
735 CFGSH_TMPL = config.gc
736 CFGH_TMPL = config_H.gc
737 PERLIMPLIB = ..\libperl59$(a)
741 .IF "$(WIN64)" == "define"
742 CFGSH_TMPL = config.vc64
743 CFGH_TMPL = config_H.vc64
745 CFGSH_TMPL = config.vc
746 CFGH_TMPL = config_H.vc
751 # makedef.pl must be updated if this changes, and this should normally
752 # only change when there is an incompatible revision of the public API.
753 PERLIMPLIB *= ..\perl59$(a)
754 PERLDLL = ..\perl59.dll
756 XCOPY = xcopy /f /r /i /d /y
757 RCOPY = xcopy /f /r /i /e /d /y
761 # filenames given to xsubpp must have forward slashes (since it puts
762 # full pathnames in #line strings)
763 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
803 EXTRACORE_SRC += perllib.c
805 .IF "$(PERL_MALLOC)" == "define"
806 EXTRACORE_SRC += ..\malloc.c
809 EXTRACORE_SRC += ..\perlio.c
816 # We need this for miniperl build unless we override canned
817 # config.h #define building mini\*
818 #.IF "$(USE_PERLIO)" == "define"
819 WIN32_SRC += .\win32io.c
822 .IF "$(CRYPT_SRC)" != ""
823 WIN32_SRC += .\$(CRYPT_SRC)
826 DLL_SRC = $(DYNALOADER).c
873 .\include\sys\socket.h \
876 CORE_H = $(CORE_NOCFG_H) .\config.h
878 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
879 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
880 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
881 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
882 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
883 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
884 DLL_OBJ = $(DLL_SRC:db:+$(o))
885 X2P_OBJ = $(X2P_SRC:db:+$(o))
887 PERLDLL_OBJ = $(CORE_OBJ)
888 PERLEXE_OBJ = perlmain$(o)
890 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
892 .IF "$(USE_SETARGV)" != ""
893 SETARGV_OBJ = setargv$(o)
896 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
897 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
898 Sys/Hostname Storable Filter/Util/Call Encode \
899 Digest/MD5 Digest/SHA PerlIO/scalar MIME/Base64 Time/HiRes \
900 Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32 \
905 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
907 # vars must be separated by "\t+~\t+", since we're using the tempfile
908 # version of config_sh.pl (we were overflowing someone's buffer by
909 # trying to fit them all on the command line)
912 INST_DRV=$(INST_DRV) ~ \
913 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
914 INST_VER=$(INST_VER:s,\,$B,) ~ \
915 INST_ARCH=$(INST_ARCH) ~ \
916 archname=$(ARCHNAME) ~ \
919 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
920 cf_email=$(EMAIL) ~ \
921 d_crypt=$(D_CRYPT) ~ \
922 d_mymalloc=$(PERL_MALLOC) ~ \
923 libs=$(LIBFILES:f) ~ \
924 incpath=$(CCINCDIR:s,\,$B,) ~ \
925 libperl=$(PERLIMPLIB:f) ~ \
926 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
933 static_ext=$(STATIC_EXT) ~ \
934 usethreads=$(USE_ITHREADS) ~ \
935 useithreads=$(USE_ITHREADS) ~ \
936 usemultiplicity=$(USE_MULTI) ~ \
937 useperlio=$(USE_PERLIO) ~ \
938 uselargefiles=$(USE_LARGE_FILES) ~ \
939 usesitecustomize=$(USE_SITECUST) ~ \
940 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
944 # set up targets varying between Win95 and WinNT builds
947 .IF "$(IS_WIN95)" == "define"
949 RIGHTMAKE = __switch_makefiles
955 .IMPORT .IGNORE : SystemRoot windir
957 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
958 ENV_OS=$(subst,OS=, $(shell @set OS))
960 .IF "$(ENV_OS)" == "Windows_NT"
961 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
963 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
970 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
971 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
972 $(X2P) MakePPPort Extensions
974 reonly : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
975 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
976 $(X2P) Extensions_reonly
978 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
980 #----------------------------------------------------------------
982 #-------------------- BEGIN Win95 SPECIFIC ----------------------
984 # this target is a jump-off point for Win95
985 # 1. it switches to the Win95-specific makefile if it exists
986 # (__do_switch_makefiles)
987 # 2. it prints a message when the Win95-specific one finishes (__done)
988 # 3. it then kills this makefile by trying to make __no_such_target
990 __switch_makefiles: __do_switch_makefiles __done __no_such_target
992 __do_switch_makefiles:
993 .IF "$(NOTFIRST)" != "true"
994 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
999 .IF "$(NOTFIRST)" != "true"
1001 @echo Build process complete. Ignore any errors after this message.
1002 @echo Run "dmake test" to test and "dmake install" to install
1005 # dummy targets for Win95-specific makefile
1015 # This target is used to generate the new makefile (.\makefile.95) for Win95
1017 .\makefile.95: .\makefile.mk
1018 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1020 #--------------------- END Win95 SPECIFIC ---------------------
1022 # a blank target for when builds don't need to do certain things
1023 # this target added for Win95 port but used to keep the WinNT port able to
1028 $(GLOBEXE) : perlglob$(o)
1029 .IF "$(CCTYPE)" == "BORLAND"
1030 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1031 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1032 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1033 .ELIF "$(CCTYPE)" == "GCC"
1034 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1036 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1037 perlglob$(o) setargv$(o)
1040 perlglob$(o) : perlglob.c
1042 config.w32 : $(CFGSH_TMPL)
1043 copy $(CFGSH_TMPL) config.w32
1045 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1047 copy $(CFGH_TMPL) config.h
1049 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1050 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1051 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1053 # this target is for when changes to the main config.sh happen
1054 # edit config.{b,v,g}c and make this target once for each supported
1055 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1057 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1058 $(CFGSH_TMPL) > ..\config.sh
1059 -cd .. && del /f perl.exe
1060 -cd .. && del /f perl*.dll
1061 cd .. && perl configpm
1062 -del /f $(CFGH_TMPL)
1064 -perl config_h.PL "INST_VER=$(INST_VER)"
1065 rename config.h $(CFGH_TMPL)
1067 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1068 cd .. && miniperl configpm
1069 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1070 $(XCOPY) ..\*.h $(COREDIR)\*.*
1071 $(XCOPY) *.h $(COREDIR)\*.*
1072 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1073 $(RCOPY) include $(COREDIR)\*.*
1074 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1075 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1077 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1078 .IF "$(CCTYPE)" == "BORLAND"
1079 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1080 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1081 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1082 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1083 .ELIF "$(CCTYPE)" == "GCC"
1084 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1085 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1087 $(LINK32) -subsystem:console -out:$@ \
1088 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1092 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1094 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1095 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1097 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1098 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1100 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1101 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1102 # unless the .IF is true), so instead we use a .ELSE with the default.
1103 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1105 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1106 .IF "$(USE_IMP_SYS)" == "define"
1107 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1109 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1112 # 1. we don't want to rebuild miniperl.exe when config.h changes
1113 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1114 $(MINI_OBJ) : $(CORE_NOCFG_H)
1116 $(WIN32_OBJ) : $(CORE_H)
1118 $(CORE_OBJ) : $(CORE_H)
1120 $(DLL_OBJ) : $(CORE_H)
1122 $(X2P_OBJ) : $(CORE_H)
1124 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1125 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1126 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1127 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1129 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1130 .IF "$(CCTYPE)" == "BORLAND"
1131 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1132 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
1134 $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
1137 .ELIF "$(CCTYPE)" == "GCC"
1138 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1139 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1140 $(subst,\,$B $(shell @type Extensions_static)) \
1141 $(LIBFILES) $(LKPOST))
1142 dlltool --output-lib $(PERLIMPLIB) \
1143 --dllname $(PERLDLL:b).dll \
1145 --base-file perl.base \
1146 --output-exp perl.exp
1147 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1148 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1149 $(subst,\,$B $(shell @type Extensions_static)) \
1150 $(LIBFILES) perl.exp $(LKPOST))
1152 $(LINK32) -dll -def:perldll.def -out:$@ \
1153 @Extensions_static \
1154 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1155 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
1157 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1160 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1161 $(MINIPERL) makeico.pl > $@
1163 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1165 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1166 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1168 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1169 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1171 ..\x2p\hash$(o) : ..\x2p\hash.c
1172 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1174 ..\x2p\str$(o) : ..\x2p\str.c
1175 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1177 ..\x2p\util$(o) : ..\x2p\util.c
1178 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1180 ..\x2p\walk$(o) : ..\x2p\walk.c
1181 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1183 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1184 $(MINIPERL) ..\x2p\find2perl.PL
1185 $(MINIPERL) ..\x2p\s2p.PL
1186 .IF "$(CCTYPE)" == "BORLAND"
1187 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1188 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1189 .ELIF "$(CCTYPE)" == "GCC"
1190 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1191 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1193 $(LINK32) -subsystem:console -out:$@ \
1194 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1197 perlmain.c : runperl.c
1198 copy runperl.c perlmain.c
1200 perlmain$(o) : perlmain.c
1201 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1203 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1204 .IF "$(CCTYPE)" == "BORLAND"
1205 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1206 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
1208 $(PERLIMPLIB) $(LIBFILES)$N)
1209 .ELIF "$(CCTYPE)" == "GCC"
1210 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1211 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1213 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1214 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1216 copy $(PERLEXE) $(WPERLEXE)
1217 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1218 copy splittree.pl ..
1219 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1221 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1222 if not exist $(AUTODIR) mkdir $(AUTODIR)
1223 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1224 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1225 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1226 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1227 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1228 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1230 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1231 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1233 MakePPPort: $(MINIPERL) $(CONFIGPM)
1234 $(MINIPERL) -I..\lib ..\mkppport
1237 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1239 #-------------------------------------------------------------------------------
1240 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1241 $(XCOPY) ..\*.h $(COREDIR)\*.*
1242 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1243 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1245 Extensions_reonly : buildext.pl $(PERLDEP) $(CONFIGPM)
1246 $(XCOPY) ..\*.h $(COREDIR)\*.*
1247 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1248 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1250 Extensions_static : buildext.pl
1251 $(XCOPY) ..\*.h $(COREDIR)\*.*
1252 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1253 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1254 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1257 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1258 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1260 Extensions_realclean :
1261 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1262 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1264 #-------------------------------------------------------------------------------
1268 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1269 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1270 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1272 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1273 # so please check that script before making structural changes here
1274 utils: $(PERLEXE) $(X2P)
1275 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1276 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1277 copy ..\README.aix ..\pod\perlaix.pod
1278 copy ..\README.amiga ..\pod\perlamiga.pod
1279 copy ..\README.apollo ..\pod\perlapollo.pod
1280 copy ..\README.beos ..\pod\perlbeos.pod
1281 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1282 copy ..\README.ce ..\pod\perlce.pod
1283 copy ..\README.cn ..\pod\perlcn.pod
1284 copy ..\README.cygwin ..\pod\perlcygwin.pod
1285 copy ..\README.dgux ..\pod\perldgux.pod
1286 copy ..\README.dos ..\pod\perldos.pod
1287 copy ..\README.epoc ..\pod\perlepoc.pod
1288 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1289 copy ..\README.hpux ..\pod\perlhpux.pod
1290 copy ..\README.hurd ..\pod\perlhurd.pod
1291 copy ..\README.irix ..\pod\perlirix.pod
1292 copy ..\README.jp ..\pod\perljp.pod
1293 copy ..\README.ko ..\pod\perlko.pod
1294 copy ..\README.linux ..\pod\perllinux.pod
1295 copy ..\README.machten ..\pod\perlmachten.pod
1296 copy ..\README.macos ..\pod\perlmacos.pod
1297 copy ..\README.macosx ..\pod\perlmacosx.pod
1298 copy ..\README.mint ..\pod\perlmint.pod
1299 copy ..\README.mpeix ..\pod\perlmpeix.pod
1300 copy ..\README.netware ..\pod\perlnetware.pod
1301 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1302 copy ..\README.os2 ..\pod\perlos2.pod
1303 copy ..\README.os390 ..\pod\perlos390.pod
1304 copy ..\README.os400 ..\pod\perlos400.pod
1305 copy ..\README.plan9 ..\pod\perlplan9.pod
1306 copy ..\README.qnx ..\pod\perlqnx.pod
1307 copy ..\README.riscos ..\pod\perlriscos.pod
1308 copy ..\README.solaris ..\pod\perlsolaris.pod
1309 copy ..\README.symbian ..\pod\perlsymbian.pod
1310 copy ..\README.tru64 ..\pod\perltru64.pod
1311 copy ..\README.tw ..\pod\perltw.pod
1312 copy ..\README.uts ..\pod\perluts.pod
1313 copy ..\README.vmesa ..\pod\perlvmesa.pod
1314 copy ..\README.vms ..\pod\perlvms.pod
1315 copy ..\README.vos ..\pod\perlvos.pod
1316 copy ..\README.win32 ..\pod\perlwin32.pod
1317 copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
1318 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1319 cd ..\lib && $(PERLEXE) lib_pm.PL
1320 $(PERLEXE) $(PL2BAT) $(UTILS)
1322 # Note that the pod cleanup in this next section is parsed (and regenerated
1323 # by pod/buildtoc so please check that script before making changes here
1325 distclean: realclean
1326 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1327 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1329 -del /f $(DYNALOADER).c
1330 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1331 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1332 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1333 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1334 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1335 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1336 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1337 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1338 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1339 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1340 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1341 -del /f $(LIBDIR)\ByteLoader.pm
1342 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1343 -del /f $(LIBDIR)\Devel\PPPort.pm
1344 -del /f $(LIBDIR)\File\Glob.pm
1345 -del /f $(LIBDIR)\Storable.pm
1346 -del /f $(LIBDIR)\Digest\MD5.pm
1347 -del /f $(LIBDIR)\Digest\SHA.pm
1348 -del /f $(LIBDIR)\PerlIO\encoding.pm
1349 -del /f $(LIBDIR)\PerlIO\scalar.pm
1350 -del /f $(LIBDIR)\PerlIO\via.pm
1351 -del /f $(LIBDIR)\Sys\Hostname.pm
1352 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1353 -del /f $(LIBDIR)\threads\shared.pm
1354 -del /f $(LIBDIR)\Time\HiRes.pm
1355 -del /f $(LIBDIR)\Unicode\Normalize.pm
1356 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1357 -del /f $(LIBDIR)\Win32.pm
1358 -del /f $(LIBDIR)\Win32API\File.pm
1359 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1360 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1361 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1362 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1363 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1364 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1365 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1366 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1367 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1368 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1369 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1370 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1371 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1372 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1373 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1374 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1375 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1376 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1377 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1378 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1379 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1380 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1381 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1382 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1383 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1384 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1385 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1386 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1388 pod2html pod2latex pod2man pod2text pod2usage \
1389 podchecker podselect
1390 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1391 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1392 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1393 -cd ..\x2p && del /f find2perl s2p psed *.bat
1394 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1398 -del /f $(PERLEXE_ICO) perl.base
1399 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1400 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1401 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1402 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1403 -if exist pod2htmd.tmp del pod2htmd.tmp
1404 -if exist pod2htmi.tmp del pod2htmi.tmp
1405 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1407 install : all installbare installhtml
1409 installbare : $(RIGHTMAKE) utils
1410 $(PERLEXE) ..\installperl
1411 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1412 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1413 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1414 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1415 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1418 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1420 inst_lib : $(CONFIGPM)
1421 copy splittree.pl ..
1422 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1423 $(RCOPY) ..\lib $(INST_LIB)\*.*
1425 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1426 cd ..\lib\unicore && \
1427 ..\$(MINIPERL) -I.. mktables
1429 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1430 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1431 if exist ..\t\perl.exe del /f ..\t\perl.exe
1432 rename ..\t\miniperl.exe perl.exe
1433 .IF "$(CCTYPE)" == "BORLAND"
1434 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1436 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1440 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1442 test-prep : all utils
1443 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1444 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1445 .IF "$(CCTYPE)" == "BORLAND"
1446 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1448 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1451 test : $(RIGHTMAKE) test-prep
1452 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1454 test-reonly : reonly utils
1455 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1456 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1457 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1459 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b $(EXTRA) && \
1463 cd .. && regen.pl && cd win32
1466 cd .. && regcomp.pl && cd win32
1468 test-notty : test-prep
1469 set PERL_SKIP_TTY_TEST=1 && \
1470 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1472 _test : $(RIGHTMAKE)
1473 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1474 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1475 .IF "$(CCTYPE)" == "BORLAND"
1476 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1478 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1480 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1483 -@erase miniperlmain$(o)
1485 -@erase perlglob$(o)
1486 -@erase perlmain$(o)
1494 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1495 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1496 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1497 -@erase $(UNIDATAFILES)
1498 -@erase $(WIN32_OBJ)
1501 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1502 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1503 -@erase ..\x2p\*.exe ..\x2p\*.bat
1507 -@erase Extensions_static
1509 clean : Extensions_clean _clean
1511 realclean : Extensions_realclean MakePPPort_clean _clean
1513 # Handy way to run perlbug -ok without having to install and run the
1514 # installed perlbug. We don't re-run the tests here - we trust the user.
1515 # Please *don't* use this unless all tests pass.
1516 # If you want to report test failures, use "dmake nok" instead.
1518 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1521 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1524 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1527 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok