2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # Borland C++ 5.02 or better
6 # Mingw32 with gcc-2.95.2 or better
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual Studio 98)
101 # Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
105 # Borland 5.02 or later
107 # MinGW with gcc-2.95.2 or later
111 # uncomment this if your Borland compiler is older than v5.4.
114 # uncomment this if you want to use Borland's VCL as your CRT
118 # uncomment this if you are compiling under Windows 95/98 and command.com
119 # (not needed if you're running under 4DOS/NT 6.01 or later)
123 # uncomment next line if you want debug version of perl (big,slow)
124 # If not enabled, we automatically try to use maximum optimization
125 # with all compilers that are known to have a working optimizer.
130 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
131 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
132 # This currently requires VC 5.0 with Service Pack 3 or later.
133 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
134 # and follow the directions in the package to install.
136 # Not recommended if you have VC 6.x and you're not running Windows 9x.
138 #USE_PERLCRT *= define
141 # uncomment to enable linking with setargv.obj under the Visual C
142 # compiler. Setting this options enables perl to expand wildcards in
143 # arguments, but it may be harder to use alternate methods like
144 # File::DosGlob that are more powerful. This option is supported only with
147 #USE_SETARGV *= define
150 # if you want to have the crypt() builtin function implemented, leave this or
151 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
152 # version of des_fcrypt().
154 CRYPT_SRC *= fcrypt.c
157 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
158 # library, uncomment this, and make sure the library exists (see README.win32)
159 # Specify the full pathname of the library.
161 #CRYPT_LIB *= fcrypt.lib
164 # set this if you wish to use perl's malloc
165 # WARNING: Turning this on/off WILL break binary compatibility with extensions
166 # you may have compiled with/without it. Be prepared to recompile all
167 # extensions if you change the default. Currently, this cannot be enabled
168 # if you ask for USE_IMP_SYS above.
170 #PERL_MALLOC *= define
173 # set this to enable debugging mstats
174 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
175 # be enabled without PERL_MALLOC as well.
177 #DEBUG_MSTATS *= define
180 # set the install locations of the compiler include/libraries
181 # Running VCVARS32.BAT is *required* when using Visual C.
182 # Some versions of Visual C don't define MSVCDIR in the environment,
183 # so you may have to set CCHOME explicitly (spaces in the path name should
186 .IF "$(CCTYPE)" == "BORLAND"
187 CCHOME *= C:\Borland\BCC55
188 .ELIF "$(CCTYPE)" == "GCC"
193 CCINCDIR *= $(CCHOME)\include
194 CCLIBDIR *= $(CCHOME)\lib
197 # Additional compiler flags can be specified here.
199 BUILDOPT *= $(BUILDOPTEXTRA)
202 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
203 # internal hash function unless the PERL_HASH_SEED environment variable is set.
204 # Alternatively, adding -DNO_HASH_SEED will completely disable the
205 # randomization feature.
206 # The latter is required to maintain binary compatibility with Perl 5.8.0.
208 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
209 #BUILDOPT += -DNO_HASH_SEED
212 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
213 # for old symbols by default, at the expense of extreme pollution. You most
214 # probably just want to build modules that won't compile with
215 # perl Makefile.PL POLLUTE=1
216 # instead of enabling this. Please report such modules to the respective
219 #BUILDOPT += -DPERL_POLLUTE
222 # This should normally be disabled. Enabling it will disable the File::Glob
223 # implementation of CORE::glob.
225 #BUILDOPT += -DPERL_EXTERNAL_GLOB
228 # This should normally be disabled. Enabling it causes perl to read scripts
229 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
231 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
234 # specify semicolon-separated list of extra directories that modules will
235 # look for libraries (spaces in path names need not be quoted)
240 # set this to point to cmd.exe (only needed if you use some
241 # alternate shell that doesn't grok cmd.exe style commands)
243 #SHELL *= g:\winnt\system32\cmd.exe
246 # set this to your email address (perl will guess a value from
247 # from your loginname and your hostname, which may not be right)
252 ## Build configuration ends.
255 ##################### CHANGE THESE ONLY IF YOU MUST #####################
257 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
261 CRYPT_FLAG = -DHAVE_DES_FCRYPT
265 DEBUG_MSTATS *= undef
267 USE_SITECUST *= undef
269 USE_ITHREADS *= undef
272 USE_LARGE_FILES *= undef
275 .IF "$(USE_IMP_SYS)" == "define"
279 .IF "$(PERL_MALLOC)" == "undef"
283 .IF "$(DEBUG_MSTATS)" == "define"
284 BUILDOPT += -DPERL_DEBUGGING_MSTATS
287 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
291 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
295 .IF "$(USE_SITECUST)" == "define"
296 BUILDOPT += -DUSE_SITECUSTOMIZE
299 .IF "$(USE_MULTI)" != "undef"
300 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
303 .IF "$(USE_IMP_SYS)" != "undef"
304 BUILDOPT += -DPERL_IMPLICIT_SYS
307 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
309 PROCESSOR_ARCHITECTURE *= x86
312 # When we are running from a 32bit cmd.exe on AMD64 then
313 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
315 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
316 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
318 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
325 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
326 .IF "$(ARCHITECTURE)" == "AMD64"
329 .IF "$(ARCHITECTURE)" == "IA64"
333 .IF "$(USE_MULTI)" == "define"
334 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
336 .IF "$(USE_PERLIO)" == "define"
337 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
339 ARCHNAME = MSWin32-$(ARCHITECTURE)
343 .IF "$(USE_ITHREADS)" == "define"
344 ARCHNAME !:= $(ARCHNAME)-thread
347 # Visual Studio 98 and .NET 2003 specific
348 # VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
349 # about 10% less time. (The free version of 7.x can't do this, however.)
350 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70"
351 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
354 ARCHDIR = ..\lib\$(ARCHNAME)
355 COREDIR = ..\lib\CORE
356 AUTODIR = ..\lib\auto
360 EXTUTILSDIR = $(LIBDIR)\ExtUtils
364 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
365 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
366 INST_LIB = $(INST_TOP)$(INST_VER)\lib
367 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
368 INST_COREDIR = $(INST_ARCHLIB)\CORE
369 INST_HTML = $(INST_TOP)$(INST_VER)\html
372 # Programs to compile, build .lib files and link
377 .IF "$(CCTYPE)" == "BORLAND"
380 .IF "$(BCCOLD)" != "define"
392 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
393 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
394 DEFINES = -DWIN32 $(CRYPT_FLAG)
395 LOCDEFS = -DPERLDLL -DPERL_CORE
401 # same libs as MSVC, except Borland doesn't have oldnames.lib
402 LIBFILES = $(CRYPT_LIB) \
403 kernel32.lib user32.lib gdi32.lib winspool.lib \
404 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
405 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
406 version.lib odbc32.lib odbccp32.lib \
409 .IF "$(CFG)" == "Debug"
410 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
413 OPTIMIZE = -O2 -D_RTLDLL
418 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
419 $(PCHFLAGS) $(OPTIMIZE)
420 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
425 .IF "$(BCCOLD)" != "define"
427 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
429 .IF "$(BCCVCL)" == "define"
430 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
431 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
435 .ELIF "$(CCTYPE)" == "GCC"
451 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
452 DEFINES = -DWIN32 $(CRYPT_FLAG)
453 LOCDEFS = -DPERLDLL -DPERL_CORE
460 LIBFILES = $(CRYPT_LIB) $(LIBC) \
461 -lmoldname -lkernel32 -luser32 -lgdi32 \
462 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
463 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
464 -lwinmm -lversion -lodbc32 -lodbccp32
466 .IF "$(CFG)" == "Debug"
467 OPTIMIZE = -g -O2 -DDEBUGGING
475 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
476 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
481 # NOTE: we assume that GCC uses MSVCRT.DLL
482 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
488 LIB32 = $(LINK32) -lib
495 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
496 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
497 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
498 LOCDEFS = -DPERLDLL -DPERL_CORE
502 .IF "$(USE_PERLCRT)" != "define"
508 .IF "$(CFG)" == "Debug"
509 .IF "$(CCTYPE)" == "MSVC20"
510 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
512 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
516 OPTIMIZE = -MD -Zi -DNDEBUG
517 # we enable debug symbols in release builds also
518 LINK_DBG = -debug -opt:ref,icf
519 # you may want to enable this if you want COFF symbols in the executables
520 # in addition to the PDB symbols. The default Dr. Watson that ships with
521 # Windows can use the the former but not latter. The free WinDbg can be
522 # installed to get better stack traces from just the PDB symbols, so we
523 # avoid the bloat of COFF symbols by default.
524 #LINK_DBG = $(LINK_DBG) -debugtype:both
525 .IF "$(WIN64)" == "define"
526 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
530 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
536 .IF "$(WIN64)" == "define"
537 DEFINES += -DWIN64 -DCONSERVATIVE
538 OPTIMIZE += -Wp64 -fp:precise
541 .IF "$(USE_PERLCRT)" != "define"
542 BUILDOPT += -DPERL_MSVCRT_READFIX
545 LIBBASEFILES = $(CRYPT_LIB) \
546 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
547 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
548 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
549 version.lib odbc32.lib odbccp32.lib
551 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
552 # include the buffer overrun verification code used by the /GS switch.
553 # Since the code links against libraries that are compiled with /GS, this
554 # "security cookie verification" must be included via bufferoverlow.lib.
555 .IF "$(WIN64)" == "define"
556 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
559 # we add LIBC here, since we may be using PerlCRT.dll
560 LIBFILES = $(LIBBASEFILES) $(LIBC)
562 EXTRACFLAGS = -nologo -GF -W3
563 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
564 $(PCHFLAGS) $(OPTIMIZE)
565 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
566 -libpath:"$(INST_COREDIR)" \
567 -machine:$(PROCESSOR_ARCHITECTURE)
574 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
576 # used to allow local linking flags that are not propogated into Config.pm,
580 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
582 #################### do not edit below this line #######################
583 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
585 # Some dmake's built with Borland C++, including Sarathy's one at:
586 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
587 # require backslashes to be doubled-up when written to $(mktmp) files.
588 # Other dmake's do not require this and would actually output a double
589 # backslash if they were doubled-up.
590 .IF "$(shell @type $(mktmp \\))"=="\\"
596 # There is a related issue with other escape sequences: Sarathy's old
597 # dmake automatically maps escape sequences like \n to their ASCII values
598 # when used in macros, while other dmake's only do so if this behaviour
599 # is explicitly requested with the :m modifier.
601 .IF "$(shell @type $(mktmp \n))"=="\n"
617 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
620 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
623 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
629 .IF "$(CCTYPE)" == "BORLAND"
630 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
631 $(IMPLIB) $(*B).lib $@
632 .ELIF "$(CCTYPE)" == "GCC"
633 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
634 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
636 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
637 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
641 .IF "$(CCTYPE)" == "GCC"
642 $(RSC) --use-temp-file -i $< -o $@
649 MINIPERL = ..\miniperl.exe
651 PERLEXE = ..\perl.exe
652 WPERLEXE = ..\wperl.exe
653 GLOBEXE = ..\perlglob.exe
654 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
655 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
658 # Unicode data files generated by mktables
659 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
660 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
661 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
662 ..\lib\unicore\PVA.pl
664 # Directories of Unicode data files generated by mktables
665 UNIDATADIR1 = ..\lib\unicore\To
666 UNIDATADIR2 = ..\lib\unicore\lib
668 PERLEXE_ICO = .\perlexe.ico
669 PERLEXE_RES = .\perlexe.res
672 # Nominate a target which causes extensions to be re-built
673 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
674 # on and really only the interface - i.e. the .def file used to export symbols
676 PERLDEP = perldll.def
679 PL2BAT = bin\pl2bat.pl
680 GLOBBAT = bin\perlglob.bat
697 ..\utils\config_data \
723 .IF "$(CCTYPE)" == "BORLAND"
725 CFGSH_TMPL = config.bc
726 CFGH_TMPL = config_H.bc
728 .ELIF "$(CCTYPE)" == "GCC"
730 CFGSH_TMPL = config.gc
731 CFGH_TMPL = config_H.gc
732 PERLIMPLIB = ..\libperl59$(a)
736 .IF "$(WIN64)" == "define"
737 CFGSH_TMPL = config.vc64
738 CFGH_TMPL = config_H.vc64
740 CFGSH_TMPL = config.vc
741 CFGH_TMPL = config_H.vc
746 # makedef.pl must be updated if this changes, and this should normally
747 # only change when there is an incompatible revision of the public API.
748 PERLIMPLIB *= ..\perl59$(a)
749 PERLDLL = ..\perl59.dll
751 XCOPY = xcopy /f /r /i /d /y
752 RCOPY = xcopy /f /r /i /e /d /y
756 # filenames given to xsubpp must have forward slashes (since it puts
757 # full pathnames in #line strings)
758 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
798 EXTRACORE_SRC += perllib.c
800 .IF "$(PERL_MALLOC)" == "define"
801 EXTRACORE_SRC += ..\malloc.c
804 EXTRACORE_SRC += ..\perlio.c
811 # We need this for miniperl build unless we override canned
812 # config.h #define building mini\*
813 #.IF "$(USE_PERLIO)" == "define"
814 WIN32_SRC += .\win32io.c
817 .IF "$(CRYPT_SRC)" != ""
818 WIN32_SRC += .\$(CRYPT_SRC)
821 DLL_SRC = $(DYNALOADER).c
868 .\include\sys\socket.h \
871 CORE_H = $(CORE_NOCFG_H) .\config.h
873 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
874 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
875 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
876 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
877 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
878 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
879 DLL_OBJ = $(DLL_SRC:db:+$(o))
880 X2P_OBJ = $(X2P_SRC:db:+$(o))
882 PERLDLL_OBJ = $(CORE_OBJ)
883 PERLEXE_OBJ = perlmain$(o)
885 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
887 .IF "$(USE_SETARGV)" != ""
888 SETARGV_OBJ = setargv$(o)
891 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
892 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
893 Sys/Hostname Storable Filter/Util/Call Encode \
894 Digest/MD5 Digest/SHA PerlIO/scalar MIME/Base64 Time/HiRes \
895 Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32 \
900 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
902 # vars must be separated by "\t+~\t+", since we're using the tempfile
903 # version of config_sh.pl (we were overflowing someone's buffer by
904 # trying to fit them all on the command line)
907 INST_DRV=$(INST_DRV) ~ \
908 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
909 INST_VER=$(INST_VER:s,\,$B,) ~ \
910 INST_ARCH=$(INST_ARCH) ~ \
911 archname=$(ARCHNAME) ~ \
914 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
915 cf_email=$(EMAIL) ~ \
916 d_crypt=$(D_CRYPT) ~ \
917 d_mymalloc=$(PERL_MALLOC) ~ \
918 libs=$(LIBFILES:f) ~ \
919 incpath=$(CCINCDIR:s,\,$B,) ~ \
920 libperl=$(PERLIMPLIB:f) ~ \
921 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
928 static_ext=$(STATIC_EXT) ~ \
929 usethreads=$(USE_ITHREADS) ~ \
930 useithreads=$(USE_ITHREADS) ~ \
931 usemultiplicity=$(USE_MULTI) ~ \
932 useperlio=$(USE_PERLIO) ~ \
933 uselargefiles=$(USE_LARGE_FILES) ~ \
934 usesitecustomize=$(USE_SITECUST) ~ \
935 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
939 # set up targets varying between Win95 and WinNT builds
942 .IF "$(IS_WIN95)" == "define"
944 RIGHTMAKE = __switch_makefiles
950 .IMPORT .IGNORE : SystemRoot windir
952 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
953 ENV_OS=$(subst,OS=, $(shell @set OS))
955 .IF "$(ENV_OS)" == "Windows_NT"
956 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
958 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
965 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
966 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
967 $(X2P) MakePPPort Extensions
969 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
971 #----------------------------------------------------------------
973 #-------------------- BEGIN Win95 SPECIFIC ----------------------
975 # this target is a jump-off point for Win95
976 # 1. it switches to the Win95-specific makefile if it exists
977 # (__do_switch_makefiles)
978 # 2. it prints a message when the Win95-specific one finishes (__done)
979 # 3. it then kills this makefile by trying to make __no_such_target
981 __switch_makefiles: __do_switch_makefiles __done __no_such_target
983 __do_switch_makefiles:
984 .IF "$(NOTFIRST)" != "true"
985 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
990 .IF "$(NOTFIRST)" != "true"
992 @echo Build process complete. Ignore any errors after this message.
993 @echo Run "dmake test" to test and "dmake install" to install
996 # dummy targets for Win95-specific makefile
1006 # This target is used to generate the new makefile (.\makefile.95) for Win95
1008 .\makefile.95: .\makefile.mk
1009 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1011 #--------------------- END Win95 SPECIFIC ---------------------
1013 # a blank target for when builds don't need to do certain things
1014 # this target added for Win95 port but used to keep the WinNT port able to
1019 $(GLOBEXE) : perlglob$(o)
1020 .IF "$(CCTYPE)" == "BORLAND"
1021 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1022 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1023 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1024 .ELIF "$(CCTYPE)" == "GCC"
1025 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1027 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1028 perlglob$(o) setargv$(o)
1031 perlglob$(o) : perlglob.c
1033 config.w32 : $(CFGSH_TMPL)
1034 copy $(CFGSH_TMPL) config.w32
1036 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1038 copy $(CFGH_TMPL) config.h
1040 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1041 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1042 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1044 # this target is for when changes to the main config.sh happen
1045 # edit config.{b,v,g}c and make this target once for each supported
1046 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1048 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1049 $(CFGSH_TMPL) > ..\config.sh
1050 -cd .. && del /f perl.exe
1051 -cd .. && del /f perl*.dll
1052 cd .. && perl configpm
1053 -del /f $(CFGH_TMPL)
1055 -perl config_h.PL "INST_VER=$(INST_VER)"
1056 rename config.h $(CFGH_TMPL)
1058 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1059 cd .. && miniperl configpm
1060 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1061 $(XCOPY) ..\*.h $(COREDIR)\*.*
1062 $(XCOPY) *.h $(COREDIR)\*.*
1063 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1064 $(RCOPY) include $(COREDIR)\*.*
1065 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1066 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1068 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1069 .IF "$(CCTYPE)" == "BORLAND"
1070 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1071 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1072 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1073 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1074 .ELIF "$(CCTYPE)" == "GCC"
1075 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1076 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1078 $(LINK32) -subsystem:console -out:$@ \
1079 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1083 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1085 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1086 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1088 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1089 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1091 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1092 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1093 # unless the .IF is true), so instead we use a .ELSE with the default.
1094 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1096 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1097 .IF "$(USE_IMP_SYS)" == "define"
1098 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1100 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1103 # 1. we don't want to rebuild miniperl.exe when config.h changes
1104 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1105 $(MINI_OBJ) : $(CORE_NOCFG_H)
1107 $(WIN32_OBJ) : $(CORE_H)
1109 $(CORE_OBJ) : $(CORE_H)
1111 $(DLL_OBJ) : $(CORE_H)
1113 $(X2P_OBJ) : $(CORE_H)
1115 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1116 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1117 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1118 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1120 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1121 .IF "$(CCTYPE)" == "BORLAND"
1122 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1123 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
1125 $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
1128 .ELIF "$(CCTYPE)" == "GCC"
1129 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1130 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1131 $(subst,\,$B $(shell @type Extensions_static)) \
1132 $(LIBFILES) $(LKPOST))
1133 dlltool --output-lib $(PERLIMPLIB) \
1134 --dllname $(PERLDLL:b).dll \
1136 --base-file perl.base \
1137 --output-exp perl.exp
1138 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1139 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1140 $(subst,\,$B $(shell @type Extensions_static)) \
1141 $(LIBFILES) perl.exp $(LKPOST))
1143 $(LINK32) -dll -def:perldll.def -out:$@ \
1144 @Extensions_static \
1145 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1146 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
1148 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1151 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1152 $(MINIPERL) makeico.pl > $@
1154 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1156 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1157 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1159 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1160 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1162 ..\x2p\hash$(o) : ..\x2p\hash.c
1163 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1165 ..\x2p\str$(o) : ..\x2p\str.c
1166 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1168 ..\x2p\util$(o) : ..\x2p\util.c
1169 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1171 ..\x2p\walk$(o) : ..\x2p\walk.c
1172 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1174 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1175 $(MINIPERL) ..\x2p\find2perl.PL
1176 $(MINIPERL) ..\x2p\s2p.PL
1177 .IF "$(CCTYPE)" == "BORLAND"
1178 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1179 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1180 .ELIF "$(CCTYPE)" == "GCC"
1181 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1182 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1184 $(LINK32) -subsystem:console -out:$@ \
1185 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1188 perlmain.c : runperl.c
1189 copy runperl.c perlmain.c
1191 perlmain$(o) : perlmain.c
1192 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1194 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1195 .IF "$(CCTYPE)" == "BORLAND"
1196 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1197 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
1199 $(PERLIMPLIB) $(LIBFILES)$N)
1200 .ELIF "$(CCTYPE)" == "GCC"
1201 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1202 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1204 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1205 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1207 copy $(PERLEXE) $(WPERLEXE)
1208 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1209 copy splittree.pl ..
1210 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1212 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1213 if not exist $(AUTODIR) mkdir $(AUTODIR)
1214 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1215 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1216 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1217 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1218 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1219 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1221 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1222 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1224 MakePPPort: $(MINIPERL) $(CONFIGPM)
1225 $(MINIPERL) -I..\lib ..\mkppport
1228 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1230 #-------------------------------------------------------------------------------
1231 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1232 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1233 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1235 Extensions_static : buildext.pl
1236 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1237 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1238 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1241 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1242 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1244 Extensions_realclean :
1245 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1246 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1248 #-------------------------------------------------------------------------------
1252 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1253 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1254 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1256 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1257 # so please check that script before making structural changes here
1258 utils: $(PERLEXE) $(X2P)
1259 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1260 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1261 copy ..\README.aix ..\pod\perlaix.pod
1262 copy ..\README.amiga ..\pod\perlamiga.pod
1263 copy ..\README.apollo ..\pod\perlapollo.pod
1264 copy ..\README.beos ..\pod\perlbeos.pod
1265 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1266 copy ..\README.ce ..\pod\perlce.pod
1267 copy ..\README.cn ..\pod\perlcn.pod
1268 copy ..\README.cygwin ..\pod\perlcygwin.pod
1269 copy ..\README.dgux ..\pod\perldgux.pod
1270 copy ..\README.dos ..\pod\perldos.pod
1271 copy ..\README.epoc ..\pod\perlepoc.pod
1272 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1273 copy ..\README.hpux ..\pod\perlhpux.pod
1274 copy ..\README.hurd ..\pod\perlhurd.pod
1275 copy ..\README.irix ..\pod\perlirix.pod
1276 copy ..\README.jp ..\pod\perljp.pod
1277 copy ..\README.ko ..\pod\perlko.pod
1278 copy ..\README.linux ..\pod\perllinux.pod
1279 copy ..\README.machten ..\pod\perlmachten.pod
1280 copy ..\README.macos ..\pod\perlmacos.pod
1281 copy ..\README.macosx ..\pod\perlmacosx.pod
1282 copy ..\README.mint ..\pod\perlmint.pod
1283 copy ..\README.mpeix ..\pod\perlmpeix.pod
1284 copy ..\README.netware ..\pod\perlnetware.pod
1285 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1286 copy ..\README.os2 ..\pod\perlos2.pod
1287 copy ..\README.os390 ..\pod\perlos390.pod
1288 copy ..\README.os400 ..\pod\perlos400.pod
1289 copy ..\README.plan9 ..\pod\perlplan9.pod
1290 copy ..\README.qnx ..\pod\perlqnx.pod
1291 copy ..\README.riscos ..\pod\perlriscos.pod
1292 copy ..\README.solaris ..\pod\perlsolaris.pod
1293 copy ..\README.symbian ..\pod\perlsymbian.pod
1294 copy ..\README.tru64 ..\pod\perltru64.pod
1295 copy ..\README.tw ..\pod\perltw.pod
1296 copy ..\README.uts ..\pod\perluts.pod
1297 copy ..\README.vmesa ..\pod\perlvmesa.pod
1298 copy ..\README.vms ..\pod\perlvms.pod
1299 copy ..\README.vos ..\pod\perlvos.pod
1300 copy ..\README.win32 ..\pod\perlwin32.pod
1301 copy ..\pod\perl594delta.pod ..\pod\perldelta.pod
1302 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1303 cd ..\lib && $(PERLEXE) lib_pm.PL
1304 $(PERLEXE) $(PL2BAT) $(UTILS)
1306 # Note that the pod cleanup in this next section is parsed (and regenerated
1307 # by pod/buildtoc so please check that script before making changes here
1309 distclean: realclean
1310 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1311 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1313 -del /f $(DYNALOADER).c
1314 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1315 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1316 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1317 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1318 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1319 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1320 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1321 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1322 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1323 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1324 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1325 -del /f $(LIBDIR)\ByteLoader.pm
1326 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1327 -del /f $(LIBDIR)\Devel\PPPort.pm
1328 -del /f $(LIBDIR)\File\Glob.pm
1329 -del /f $(LIBDIR)\Storable.pm
1330 -del /f $(LIBDIR)\Digest\MD5.pm
1331 -del /f $(LIBDIR)\Digest\SHA.pm
1332 -del /f $(LIBDIR)\PerlIO\encoding.pm
1333 -del /f $(LIBDIR)\PerlIO\scalar.pm
1334 -del /f $(LIBDIR)\PerlIO\via.pm
1335 -del /f $(LIBDIR)\Sys\Hostname.pm
1336 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1337 -del /f $(LIBDIR)\threads\shared.pm
1338 -del /f $(LIBDIR)\Time\HiRes.pm
1339 -del /f $(LIBDIR)\Unicode\Normalize.pm
1340 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1341 -del /f $(LIBDIR)\Win32.pm
1342 -del /f $(LIBDIR)\Win32API\File.pm
1343 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1344 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1345 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1346 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1347 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1348 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1349 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1350 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1351 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1352 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1353 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1354 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1355 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1356 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1357 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1358 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1359 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1360 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1361 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1362 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1363 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1364 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1365 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1366 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1367 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1368 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1369 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1370 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1372 pod2html pod2latex pod2man pod2text pod2usage \
1373 podchecker podselect
1374 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1375 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1376 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1377 -cd ..\x2p && del /f find2perl s2p psed *.bat
1378 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1382 -del /f $(PERLEXE_ICO) perl.base
1383 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1384 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1385 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1386 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1387 -if exist pod2htmd.tmp del pod2htmd.tmp
1388 -if exist pod2htmi.tmp del pod2htmi.tmp
1389 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1391 install : all installbare installhtml
1393 installbare : $(RIGHTMAKE) utils
1394 $(PERLEXE) ..\installperl
1395 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1396 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1397 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1398 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1399 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1402 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1404 inst_lib : $(CONFIGPM)
1405 copy splittree.pl ..
1406 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1407 $(RCOPY) ..\lib $(INST_LIB)\*.*
1409 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1410 cd ..\lib\unicore && \
1411 ..\$(MINIPERL) -I.. mktables
1413 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1414 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1415 if exist ..\t\perl.exe del /f ..\t\perl.exe
1416 rename ..\t\miniperl.exe perl.exe
1417 .IF "$(CCTYPE)" == "BORLAND"
1418 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1420 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1424 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1426 test-prep : all utils
1427 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1428 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1429 .IF "$(CCTYPE)" == "BORLAND"
1430 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1432 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1435 test : $(RIGHTMAKE) test-prep
1436 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1438 test-notty : test-prep
1439 set PERL_SKIP_TTY_TEST=1 && \
1440 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1442 _test : $(RIGHTMAKE)
1443 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1444 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1445 .IF "$(CCTYPE)" == "BORLAND"
1446 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1448 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1450 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1453 -@erase miniperlmain$(o)
1455 -@erase perlglob$(o)
1456 -@erase perlmain$(o)
1464 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1465 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1466 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1467 -@erase $(UNIDATAFILES)
1468 -@erase $(WIN32_OBJ)
1471 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1472 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1473 -@erase ..\x2p\*.exe ..\x2p\*.bat
1477 -@erase Extensions_static
1479 clean : Extensions_clean _clean
1481 realclean : Extensions_realclean MakePPPort_clean _clean
1483 # Handy way to run perlbug -ok without having to install and run the
1484 # installed perlbug. We don't re-run the tests here - we trust the user.
1485 # Please *don't* use this unless all tests pass.
1486 # If you want to report test failures, use "dmake nok" instead.
1488 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1491 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1494 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1497 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok