2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # Comment this out if you don't want to enable large file support for
80 # some reason. Should normally only be changed to maintain compatibility
81 # with an older release of perl.
82 USE_LARGE_FILES *= define
85 # uncomment exactly one of the following
89 # Visual C++ > 2.x and < 6.x
93 # Borland 5.02 or later
95 # mingw32+gcc-2.95.2 or better
97 # Uncomment this if you are using the latest MinGW release (2.0.0)
99 #USE_GCC_V3_2 *= define
102 # uncomment this if your Borland compiler is older than v5.4.
105 # uncomment this if you want to use Borland's VCL as your CRT
109 # uncomment this if you are compiling under Windows 95/98 and command.com
110 # (not needed if you're running under 4DOS/NT 6.01 or later)
114 # uncomment next line if you want debug version of perl (big,slow)
115 # If not enabled, we automatically try to use maximum optimization
116 # with all compilers that are known to have a working optimizer.
121 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
122 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
123 # This currently requires VC 5.0 with Service Pack 3 or later.
124 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
125 # and follow the directions in the package to install.
127 # Not recommended if you have VC 6.x and you're not running Windows 9x.
129 #USE_PERLCRT *= define
132 # uncomment to enable linking with setargv.obj under the Visual C
133 # compiler. Setting this options enables perl to expand wildcards in
134 # arguments, but it may be harder to use alternate methods like
135 # File::DosGlob that are more powerful. This option is supported only with
138 #USE_SETARGV *= define
141 # if you want to have the crypt() builtin function implemented, leave this or
142 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
143 # version of des_fcrypt().
145 CRYPT_SRC *= fcrypt.c
148 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
149 # library, uncomment this, and make sure the library exists (see README.win32)
150 # Specify the full pathname of the library.
152 #CRYPT_LIB *= fcrypt.lib
155 # set this if you wish to use perl's malloc
156 # WARNING: Turning this on/off WILL break binary compatibility with extensions
157 # you may have compiled with/without it. Be prepared to recompile all
158 # extensions if you change the default. Currently, this cannot be enabled
159 # if you ask for USE_IMP_SYS above.
161 #PERL_MALLOC *= define
164 # set the install locations of the compiler include/libraries
165 # Running VCVARS32.BAT is *required* when using Visual C.
166 # Some versions of Visual C don't define MSVCDIR in the environment,
167 # so you may have to set CCHOME explicitly (spaces in the path name should
170 .IF "$(CCTYPE)" == "BORLAND"
171 CCHOME *= C:\borland\bcc55
172 .ELIF "$(CCTYPE)" == "GCC"
177 CCINCDIR *= $(CCHOME)\include
178 CCLIBDIR *= $(CCHOME)\lib
181 # Additional compiler flags can be specified here.
185 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
186 # for old symbols by default, at the expense of extreme pollution. You most
187 # probably just want to build modules that won't compile with
188 # perl Makefile.PL POLLUTE=1
189 # instead of enabling this. Please report such modules to the respective
192 #BUILDOPT += -DPERL_POLLUTE
195 # This should normally be disabled. Enabling it will disable the File::Glob
196 # implementation of CORE::glob.
198 #BUILDOPT += -DPERL_EXTERNAL_GLOB
201 # This should normally be disabled. Enabling it causes perl to read scripts
202 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
203 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
206 # specify semicolon-separated list of extra directories that modules will
207 # look for libraries (spaces in path names need not be quoted)
212 # set this to point to cmd.exe (only needed if you use some
213 # alternate shell that doesn't grok cmd.exe style commands)
215 #SHELL *= g:\winnt\system32\cmd.exe
218 # set this to your email address (perl will guess a value from
219 # from your loginname and your hostname, which may not be right)
224 ## Build configuration ends.
227 ##################### CHANGE THESE ONLY IF YOU MUST #####################
229 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
233 CRYPT_FLAG = -DHAVE_DES_FCRYPT
239 USE_ITHREADS *= undef
242 USE_LARGE_FILES *= undef
245 .IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
249 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
253 .IF "$(USE_MULTI)" != "undef"
254 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
257 .IF "$(USE_IMP_SYS)" != "undef"
258 BUILDOPT += -DPERL_IMPLICIT_SYS
261 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
263 PROCESSOR_ARCHITECTURE *= x86
266 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
267 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
269 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
276 .IF "$(USE_MULTI)" == "define"
277 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
279 .IF "$(USE_PERLIO)" == "define"
280 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
282 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
287 .IF "$(USE_ITHREADS)" == "define"
288 ARCHNAME !:= $(ARCHNAME)-thread
291 # Visual Studio 98 specific
292 .IF "$(CCTYPE)" == "MSVC60"
294 # VC 6.0 can load the socket dll on demand. Makes the test suite
295 # run in about 10% less time.
296 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
298 .IF "$(CFG)" == "Debug"
300 # VC 6.0 seems capable of compiling perl correctly with optimizations
301 # enabled. Anything earlier fails tests.
306 ARCHDIR = ..\lib\$(ARCHNAME)
307 COREDIR = ..\lib\CORE
308 AUTODIR = ..\lib\auto
312 EXTUTILSDIR = $(LIBDIR)\ExtUtils
315 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
316 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
317 INST_LIB = $(INST_TOP)$(INST_VER)\lib
318 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
319 INST_COREDIR = $(INST_ARCHLIB)\CORE
320 INST_POD = $(INST_LIB)\pod
321 INST_HTML = $(INST_TOP)$(INST_VER)\html
324 # Programs to compile, build .lib files and link
329 .IF "$(CCTYPE)" == "BORLAND"
332 .IF "$(BCCOLD)" != "define"
344 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
345 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
346 DEFINES = -DWIN32 $(CRYPT_FLAG)
347 LOCDEFS = -DPERLDLL -DPERL_CORE
352 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
354 .IF "$(CFG)" == "Debug"
355 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
358 OPTIMIZE = -O2 -D_RTLDLL
362 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
363 $(PCHFLAGS) $(OPTIMIZE)
364 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
368 .IF "$(BCCOLD)" != "define"
370 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
372 .IF "$(BCCVCL)" == "define"
373 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
374 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
378 .ELIF "$(CCTYPE)" == "GCC"
382 .IF "$(USE_GCC_V3_2)" == "define"
397 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
398 DEFINES = -DWIN32 $(CRYPT_FLAG)
399 LOCDEFS = -DPERLDLL -DPERL_CORE
406 LIBFILES = $(CRYPT_LIB) $(LIBC) \
407 -lmoldname -lkernel32 -luser32 -lgdi32 \
408 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
409 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
410 -lwinmm -lversion -lodbc32
412 .IF "$(CFG)" == "Debug"
413 OPTIMIZE = -g -O2 -DDEBUGGING
420 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
421 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
426 # NOTE: we assume that GCC uses MSVCRT.DLL
427 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
433 LIB32 = $(LINK32) -lib
440 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
441 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
442 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
443 LOCDEFS = -DPERLDLL -DPERL_CORE
447 .IF "$(USE_PERLCRT)" != "define"
456 .IF "$(CFG)" == "Debug"
457 .IF "$(CCTYPE)" == "MSVC20"
458 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
460 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
464 OPTIMIZE = -MD -DNDEBUG
466 .IF "$(WIN64)" == "define"
467 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
471 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
477 .IF "$(WIN64)" == "define"
478 DEFINES += -DWIN64 -DCONSERVATIVE
479 OPTIMIZE += -Wp64 -Op
482 .IF "$(USE_PERLCRT)" != "define"
483 BUILDOPT += -DPERL_MSVCRT_READFIX
486 LIBBASEFILES = $(CRYPT_LIB) \
487 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
488 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
489 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
492 # win64 doesn't have some libs
493 .IF "$(WIN64)" != "define"
494 LIBBASEFILES += odbc32.lib odbccp32.lib
497 # we add LIBC here, since we may be using PerlCRT.dll
498 LIBFILES = $(LIBBASEFILES) $(LIBC)
500 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
501 $(PCHFLAGS) $(OPTIMIZE)
502 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
503 -libpath:"$(INST_COREDIR)" \
504 -machine:$(PROCESSOR_ARCHITECTURE)
511 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
513 # used to allow local linking flags that are not propogated into Config.pm,
517 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
519 #################### do not edit below this line #######################
520 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
532 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
535 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
538 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
544 .IF "$(CCTYPE)" == "BORLAND"
545 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
546 $(IMPLIB) $(*B).lib $@
547 .ELIF "$(CCTYPE)" == "GCC"
548 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
549 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
551 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
552 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
560 MINIPERL = ..\miniperl.exe
562 PERLEXE = ..\perl.exe
563 WPERLEXE = ..\wperl.exe
564 GLOBEXE = ..\perlglob.exe
565 CONFIGPM = ..\lib\Config.pm
566 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
569 # Nominate a target which causes extensions to be re-built
570 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
571 # on and really only the interface - i.e. the .def file used to export symbols
573 PERLDEP = perldll.def
576 PL2BAT = bin\pl2bat.pl
577 GLOBBAT = bin\perlglob.bat
606 ..\lib\ExtUtils\xsubpp \
613 .IF "$(CCTYPE)" == "BORLAND"
615 CFGSH_TMPL = config.bc
616 CFGH_TMPL = config_H.bc
618 .ELIF "$(CCTYPE)" == "GCC"
620 CFGSH_TMPL = config.gc
621 CFGH_TMPL = config_H.gc
622 PERLIMPLIB = ..\libperl59$(a)
626 .IF "$(WIN64)" == "define"
627 CFGSH_TMPL = config.vc64
628 CFGH_TMPL = config_H.vc64
630 CFGSH_TMPL = config.vc
631 CFGH_TMPL = config_H.vc
636 # makedef.pl must be updated if this changes, and this should normally
637 # only change when there is an incompatible revision of the public API.
638 PERLIMPLIB *= ..\perl59$(a)
639 PERLDLL = ..\perl59.dll
641 XCOPY = xcopy /f /r /i /d
642 RCOPY = xcopy /f /r /i /e /d
646 # filenames given to xsubpp must have forward slashes (since it puts
647 # full pathnames in #line strings)
648 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
687 EXTRACORE_SRC += perllib.c
689 .IF "$(PERL_MALLOC)" == "define"
690 EXTRACORE_SRC += ..\malloc.c
693 EXTRACORE_SRC += ..\perlio.c
700 # We need this for miniperl build unless we override canned
701 # config.h #define building mini\*
702 #.IF "$(USE_PERLIO)" == "define"
703 WIN32_SRC += .\win32io.c
706 .IF "$(CRYPT_SRC)" != ""
707 WIN32_SRC += .\$(CRYPT_SRC)
710 DLL_SRC = $(DYNALOADER).c
756 .\include\sys\socket.h \
759 CORE_H = $(CORE_NOCFG_H) .\config.h
761 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
762 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
763 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
764 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
765 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
766 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
767 DLL_OBJ = $(DLL_SRC:db:+$(o))
768 X2P_OBJ = $(X2P_SRC:db:+$(o))
770 PERLDLL_OBJ = $(CORE_OBJ)
771 PERLEXE_OBJ = perlmain$(o)
773 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
775 .IF "$(USE_SETARGV)" != ""
776 SETARGV_OBJ = setargv$(o)
779 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
780 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
781 Sys/Hostname Storable Filter/Util/Call Encode \
782 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
784 STATIC_EXT = DynaLoader
787 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
789 POD2HTML = $(PODDIR)\pod2html
790 POD2MAN = $(PODDIR)\pod2man
791 POD2LATEX = $(PODDIR)\pod2latex
792 POD2TEXT = $(PODDIR)\pod2text
794 # vars must be separated by "\t+~\t+", since we're using the tempfile
795 # version of config_sh.pl (we were overflowing someone's buffer by
796 # trying to fit them all on the command line)
799 INST_DRV=$(INST_DRV) ~ \
800 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
801 INST_VER=$(INST_VER:s/\/\\/) ~ \
802 INST_ARCH=$(INST_ARCH) ~ \
803 archname=$(ARCHNAME) ~ \
806 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
807 cf_email=$(EMAIL) ~ \
808 d_crypt=$(D_CRYPT) ~ \
809 d_mymalloc=$(PERL_MALLOC) ~ \
810 libs=$(LIBFILES:f) ~ \
811 incpath=$(CCINCDIR:s/\/\\/) ~ \
812 libperl=$(PERLIMPLIB:f) ~ \
813 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
820 static_ext=$(STATIC_EXT) ~ \
821 usethreads=$(USE_ITHREADS) ~ \
822 useithreads=$(USE_ITHREADS) ~ \
823 usemultiplicity=$(USE_MULTI) ~ \
824 useperlio=$(USE_PERLIO) ~ \
825 uselargefiles=$(USE_LARGE_FILES) ~ \
826 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
830 # set up targets varying between Win95 and WinNT builds
833 .IF "$(IS_WIN95)" == "define"
835 RIGHTMAKE = __switch_makefiles
846 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
847 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
850 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
852 #----------------------------------------------------------------
854 #-------------------- BEGIN Win95 SPECIFIC ----------------------
856 # this target is a jump-off point for Win95
857 # 1. it switches to the Win95-specific makefile if it exists
858 # (__do_switch_makefiles)
859 # 2. it prints a message when the Win95-specific one finishes (__done)
860 # 3. it then kills this makefile by trying to make __no_such_target
862 __switch_makefiles: __do_switch_makefiles __done __no_such_target
864 __do_switch_makefiles:
865 .IF "$(NOTFIRST)" != "true"
866 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
871 .IF "$(NOTFIRST)" != "true"
873 @echo Build process complete. Ignore any errors after this message.
874 @echo Run "dmake test" to test and "dmake install" to install
877 # dummy targets for Win95-specific makefile
887 # This target is used to generate the new makefile (.\makefile.95) for Win95
889 .\makefile.95: .\makefile.mk
890 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
892 #--------------------- END Win95 SPECIFIC ---------------------
894 # a blank target for when builds don't need to do certain things
895 # this target added for Win95 port but used to keep the WinNT port able to
900 $(GLOBEXE) : perlglob$(o)
901 .IF "$(CCTYPE)" == "BORLAND"
902 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
903 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
904 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
905 .ELIF "$(CCTYPE)" == "GCC"
906 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
908 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
909 perlglob$(o) setargv$(o)
912 perlglob$(o) : perlglob.c
914 config.w32 : $(CFGSH_TMPL)
915 copy $(CFGSH_TMPL) config.w32
917 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
919 copy $(CFGH_TMPL) config.h
921 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
922 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
923 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
925 # this target is for when changes to the main config.sh happen
926 # edit config.{b,v,g}c and make this target once for each supported
927 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
929 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
930 $(CFGSH_TMPL) > ..\config.sh
931 -cd .. && del /f perl.exe
932 -cd .. && del /f perl*.dll
933 cd .. && perl configpm
936 -perl config_h.PL "INST_VER=$(INST_VER)"
937 rename config.h $(CFGH_TMPL)
939 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
940 cd .. && miniperl configpm
941 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
942 $(XCOPY) ..\*.h $(COREDIR)\*.*
943 $(XCOPY) *.h $(COREDIR)\*.*
944 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
945 $(RCOPY) include $(COREDIR)\*.*
946 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
947 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
949 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
950 .IF "$(CCTYPE)" == "BORLAND"
951 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
952 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
953 .ELIF "$(CCTYPE)" == "GCC"
954 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
955 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
957 $(LINK32) -subsystem:console -out:$@ \
958 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
962 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
964 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
965 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
967 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
968 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
970 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
971 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
972 # unless the .IF is true), so instead we use a .ELSE with the default.
973 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
975 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
976 .IF "$(USE_IMP_SYS)" == "define"
977 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
979 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
982 # 1. we don't want to rebuild miniperl.exe when config.h changes
983 # 2. we don't want to rebuild miniperl.exe with non-default config.h
984 $(MINI_OBJ) : $(CORE_NOCFG_H)
986 $(WIN32_OBJ) : $(CORE_H)
987 $(CORE_OBJ) : $(CORE_H)
988 $(DLL_OBJ) : $(CORE_H)
989 $(X2P_OBJ) : $(CORE_H)
991 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
992 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
993 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
995 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
996 .IF "$(CCTYPE)" == "BORLAND"
997 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
998 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1003 .ELIF "$(CCTYPE)" == "GCC"
1004 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1005 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1006 dlltool --output-lib $(PERLIMPLIB) \
1007 --dllname $(PERLDLL:b).dll \
1009 --base-file perl.base \
1010 --output-exp perl.exp
1011 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1012 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1015 $(LINK32) -dll -def:perldll.def -out:$@ \
1016 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1017 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1019 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1021 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1022 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1024 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1025 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1027 ..\x2p\hash$(o) : ..\x2p\hash.c
1028 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1030 ..\x2p\str$(o) : ..\x2p\str.c
1031 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1033 ..\x2p\util$(o) : ..\x2p\util.c
1034 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1036 ..\x2p\walk$(o) : ..\x2p\walk.c
1037 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1039 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1040 $(MINIPERL) ..\x2p\find2perl.PL
1041 $(MINIPERL) ..\x2p\s2p.PL
1042 .IF "$(CCTYPE)" == "BORLAND"
1043 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1044 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1045 .ELIF "$(CCTYPE)" == "GCC"
1046 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1047 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1049 $(LINK32) -subsystem:console -out:$@ \
1050 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1053 perlmain.c : runperl.c
1054 copy runperl.c perlmain.c
1056 perlmain$(o) : perlmain.c
1057 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1059 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1060 .IF "$(CCTYPE)" == "BORLAND"
1061 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1062 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1064 $(PERLIMPLIB) $(LIBFILES)\n)
1065 .ELIF "$(CCTYPE)" == "GCC"
1066 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1067 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1069 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1070 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1072 copy $(PERLEXE) $(WPERLEXE)
1073 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1074 copy splittree.pl ..
1075 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1077 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1078 if not exist $(AUTODIR) mkdir $(AUTODIR)
1079 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1080 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1081 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1082 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1083 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1084 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1086 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1087 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1089 #----------------------------------------------------------------------------------
1090 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1091 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1094 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1096 #----------------------------------------------------------------------------------
1100 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1101 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1102 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1104 utils: $(PERLEXE) $(X2P)
1105 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1106 copy ..\README.aix .\perlaix.pod
1107 copy ..\README.amiga .\perlamiga.pod
1108 copy ..\README.apollo .\perlapollo.pod
1109 copy ..\README.beos .\perlbeos.pod
1110 copy ..\README.bs2000 .\perlbs2000.pod
1111 copy ..\README.ce .\perlce.pod
1112 copy ..\README.cn .\perlcn.pod
1113 copy ..\README.cygwin .\perlcygwin.pod
1114 copy ..\README.dgux .\perldgux.pod
1115 copy ..\README.dos .\perldos.pod
1116 copy ..\README.epoc .\perlepoc.pod
1117 copy ..\README.freebsd .\perlfreebsd.pod
1118 copy ..\README.hpux .\perlhpux.pod
1119 copy ..\README.hurd .\perlhurd.pod
1120 copy ..\README.irix .\perlirix.pod
1121 copy ..\README.jp .\perljp.pod
1122 copy ..\README.ko .\perlko.pod
1123 copy ..\README.machten .\perlmachten.pod
1124 copy ..\README.macos .\perlmacos.pod
1125 copy ..\README.macosx .\perlmacosx.pod
1126 copy ..\README.mint .\perlmint.pod
1127 copy ..\README.mpeix .\perlmpeix.pod
1128 copy ..\README.netware .\perlnetware.pod
1129 copy ..\README.os2 .\perlos2.pod
1130 copy ..\README.os390 .\perlos390.pod
1131 copy ..\README.os400 .\perlos400.pod
1132 copy ..\README.plan9 .\perlplan9.pod
1133 copy ..\README.qnx .\perlqnx.pod
1134 copy ..\README.solaris .\perlsolaris.pod
1135 copy ..\README.tru64 .\perltru64.pod
1136 copy ..\README.tw .\perltw.pod
1137 copy ..\README.uts .\perluts.pod
1138 copy ..\README.vmesa .\perlvmesa.pod
1139 copy ..\README.vms .\perlvms.pod
1140 copy ..\README.vos .\perlvos.pod
1141 copy ..\README.win32 .\perlwin32.pod
1142 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1143 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1144 cd ..\lib && $(PERLEXE) lib_pm.PL
1145 $(PERLEXE) $(PL2BAT) $(UTILS)
1148 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1149 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1151 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1152 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1153 -del /f $(LIBDIR)\XSLoader.pm
1154 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1155 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1156 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1157 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1158 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1159 -del /f $(LIBDIR)\PerlIO\scalar.pm
1160 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1161 -del /f $(LIBDIR)\File\Glob.pm
1162 -del /f $(LIBDIR)\Storable.pm
1163 -del /f $(LIBDIR)\Filter\Util\Call.pm
1164 -del /f $(LIBDIR)\Digest\MD5.pm
1165 -del /f $(LIBDIR)\MIME\Base64.pm
1166 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1167 -del /f $(LIBDIR)\Time\HiRes.pm
1168 -del /f $(LIBDIR)\List\Util.pm
1169 -del /f $(LIBDIR)\Scalar\Util.pm
1170 -del /f $(LIBDIR)\Unicode\Normalize.pm
1171 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1172 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1173 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1174 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1175 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1176 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1177 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1178 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1179 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1180 -if exist $(LIBDIR)\Digest rmdir /s $(LIBDIR)\Digest
1181 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1182 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1183 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1184 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1185 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1186 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1187 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1188 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1189 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1190 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1191 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1192 perldgux.pod perldos.pod perlepoc.pod perlfreebsd.pod \
1193 perlhpux.pod perlhurd.pod perlirix.pod perljp.pod perlko.pod \
1194 perlmachten.pod perlmacos.pod perlmacosx.pod perlmint.pod \
1195 perlmpeix.pod perlnetware.pod perlos2.pod perlos390.pod \
1196 perlos400.pod perlplan9.pod perlqnx.pod perlsolaris.pod \
1197 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
1198 perlvms.pod perlvos.pod perlwin32.pod \
1199 pod2html pod2latex pod2man pod2text pod2usage \
1200 podchecker podselect
1201 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1202 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat
1203 -cd ..\x2p && del /f find2perl s2p psed *.bat
1204 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1207 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1208 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1209 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1210 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1211 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1212 -if exist $(COREDIR) rmdir /s $(COREDIR)
1214 install : all installbare installhtml
1216 installbare : $(RIGHTMAKE) utils
1217 $(PERLEXE) ..\installperl
1218 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1219 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1220 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1223 $(RCOPY) html\*.* $(INST_HTML)\*.*
1225 inst_lib : $(CONFIGPM)
1226 copy splittree.pl ..
1227 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1228 $(RCOPY) ..\lib $(INST_LIB)\*.*
1230 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1231 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1232 .IF "$(CCTYPE)" == "BORLAND"
1233 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1235 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1240 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1242 test-prep : all utils
1243 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1244 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1245 .IF "$(CCTYPE)" == "BORLAND"
1246 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1248 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1251 test : $(RIGHTMAKE) test-prep
1252 cd ..\t && $(PERLEXE) -I..\lib harness
1254 test-notty : test-prep
1255 set PERL_SKIP_TTY_TEST=1 && \
1256 cd ..\t && $(PERLEXE) -I.\lib harness
1258 _test : $(RIGHTMAKE)
1259 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1260 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1261 .IF "$(CCTYPE)" == "BORLAND"
1262 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1264 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1266 cd ..\t && $(PERLEXE) -I..\lib harness
1268 clean : Extensions_clean
1269 -@erase miniperlmain$(o)
1271 -@erase perlglob$(o)
1272 -@erase perlmain$(o)
1280 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1281 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1282 -@erase $(WIN32_OBJ)
1285 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1286 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1287 -@erase ..\x2p\*.exe ..\x2p\*.bat
1291 # Handy way to run perlbug -ok without having to install and run the
1292 # installed perlbug. We don't re-run the tests here - we trust the user.
1293 # Please *don't* use this unless all tests pass.
1294 # If you want to report test failures, use "dmake nok" instead.
1296 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1299 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1302 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1305 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok