2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # uncomment exactly one of the following
83 # Visual C++ > 2.x and < 6.x
87 # Borland 5.02 or later
89 # mingw32+gcc-2.95.2 or better
93 # uncomment this if your Borland compiler is older than v5.4.
96 # uncomment this if you want to use Borland's VCL as your CRT
100 # uncomment this if you are compiling under Windows 95/98 and command.com
101 # (not needed if you're running under 4DOS/NT 6.01 or later)
105 # uncomment next line if you want debug version of perl (big,slow)
106 # If not enabled, we automatically try to use maximum optimization
107 # with all compilers that are known to have a working optimizer.
112 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
113 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
114 # This currently requires VC 5.0 with Service Pack 3 or later.
115 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
116 # and follow the directions in the package to install.
118 # Not recommended if you have VC 6.x and you're not running Windows 9x.
120 #USE_PERLCRT *= define
123 # uncomment to enable linking with setargv.obj under the Visual C
124 # compiler. Setting this options enables perl to expand wildcards in
125 # arguments, but it may be harder to use alternate methods like
126 # File::DosGlob that are more powerful. This option is supported only with
129 #USE_SETARGV *= define
132 # if you have the source for des_fcrypt(), uncomment this and make sure the
133 # file exists (see README.win32). File should be located in the same
134 # directory as this file.
136 #CRYPT_SRC *= fcrypt.c
139 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
140 # library, uncomment this, and make sure the library exists (see README.win32)
141 # Specify the full pathname of the library.
143 #CRYPT_LIB *= fcrypt.lib
146 # set this if you wish to use perl's malloc
147 # WARNING: Turning this on/off WILL break binary compatibility with extensions
148 # you may have compiled with/without it. Be prepared to recompile all
149 # extensions if you change the default. Currently, this cannot be enabled
150 # if you ask for USE_IMP_SYS above.
152 #PERL_MALLOC *= define
155 # set the install locations of the compiler include/libraries
156 # Running VCVARS32.BAT is *required* when using Visual C.
157 # Some versions of Visual C don't define MSVCDIR in the environment,
158 # so you may have to set CCHOME explicitly (spaces in the path name should
161 .IF "$(CCTYPE)" == "BORLAND"
162 CCHOME *= C:\borland\bcc55
163 .ELIF "$(CCTYPE)" == "GCC"
168 CCINCDIR *= $(CCHOME)\include
169 CCLIBDIR *= $(CCHOME)\lib
172 # Additional compiler flags can be specified here.
176 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
177 # for old symbols by default, at the expense of extreme pollution. You most
178 # probably just want to build modules that won't compile with
179 # perl Makefile.PL POLLUTE=1
180 # instead of enabling this. Please report such modules to the respective
183 #BUILDOPT += -DPERL_POLLUTE
186 # This should normally be disabled. Enabling it will disable the File::Glob
187 # implementation of CORE::glob.
189 #BUILDOPT += -DPERL_EXTERNAL_GLOB
192 # This should normally be disabled. Enabling it causes perl to read scripts
193 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
194 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
197 # specify semicolon-separated list of extra directories that modules will
198 # look for libraries (spaces in path names need not be quoted)
203 # set this to point to cmd.exe (only needed if you use some
204 # alternate shell that doesn't grok cmd.exe style commands)
206 #SHELL *= g:\winnt\system32\cmd.exe
209 # set this to your email address (perl will guess a value from
210 # from your loginname and your hostname, which may not be right)
215 ## Build configuration ends.
218 ##################### CHANGE THESE ONLY IF YOU MUST #####################
220 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
224 CRYPT_FLAG = -DHAVE_DES_FCRYPT
230 USE_ITHREADS *= undef
235 .IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
239 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
243 .IF "$(USE_MULTI)" != "undef"
244 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
247 .IF "$(USE_IMP_SYS)" != "undef"
248 BUILDOPT += -DPERL_IMPLICIT_SYS
251 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
253 PROCESSOR_ARCHITECTURE *= x86
256 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
257 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
259 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
266 .IF "$(USE_MULTI)" == "define"
267 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
269 .IF "$(USE_PERLIO)" == "define"
270 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
272 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
274 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
277 .IF "$(USE_ITHREADS)" == "define"
278 ARCHNAME !:= $(ARCHNAME)-thread
281 # Visual Studio 98 specific
282 .IF "$(CCTYPE)" == "MSVC60"
284 # VC 6.0 can load the socket dll on demand. Makes the test suite
285 # run in about 10% less time.
286 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
288 .IF "$(CFG)" == "Debug"
290 # VC 6.0 seems capable of compiling perl correctly with optimizations
291 # enabled. Anything earlier fails tests.
296 ARCHDIR = ..\lib\$(ARCHNAME)
297 COREDIR = ..\lib\CORE
298 AUTODIR = ..\lib\auto
302 EXTUTILSDIR = $(LIBDIR)\ExtUtils
305 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
306 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
307 INST_LIB = $(INST_TOP)$(INST_VER)\lib
308 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
309 INST_COREDIR = $(INST_ARCHLIB)\CORE
310 INST_POD = $(INST_LIB)\pod
311 INST_HTML = $(INST_TOP)$(INST_VER)\html
314 # Programs to compile, build .lib files and link
319 .IF "$(CCTYPE)" == "BORLAND"
322 .IF "$(BCCOLD)" != "define"
334 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
335 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
336 DEFINES = -DWIN32 $(CRYPT_FLAG)
337 LOCDEFS = -DPERLDLL -DPERL_CORE
342 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
344 .IF "$(CFG)" == "Debug"
345 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
348 OPTIMIZE = -O2 -D_RTLDLL
352 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
353 $(PCHFLAGS) $(OPTIMIZE)
354 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
358 .IF "$(BCCOLD)" != "define"
360 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
362 .IF "$(BCCVCL)" == "define"
363 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
364 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
368 .ELIF "$(CCTYPE)" == "GCC"
384 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
385 DEFINES = -DWIN32 $(CRYPT_FLAG)
386 LOCDEFS = -DPERLDLL -DPERL_CORE
393 LIBFILES = $(CRYPT_LIB) $(LIBC) \
394 -lmoldname -lkernel32 -luser32 -lgdi32 \
395 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
396 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
397 -lwinmm -lversion -lodbc32
399 .IF "$(CFG)" == "Debug"
400 OPTIMIZE = -g -O2 -DDEBUGGING
407 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
408 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
413 # NOTE: we assume that GCC uses MSVCRT.DLL
414 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
420 LIB32 = $(LINK32) -lib
427 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
428 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
429 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
430 LOCDEFS = -DPERLDLL -DPERL_CORE
434 .IF "$(USE_PERLCRT)" != "define"
443 .IF "$(CFG)" == "Debug"
444 .IF "$(CCTYPE)" == "MSVC20"
445 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
447 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
451 OPTIMIZE = -MD -DNDEBUG
453 .IF "$(WIN64)" == "define"
454 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
458 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
464 .IF "$(WIN64)" == "define"
465 DEFINES += -DWIN64 -DCONSERVATIVE
466 OPTIMIZE += -Wp64 -Op
469 .IF "$(USE_PERLCRT)" != "define"
470 BUILDOPT += -DPERL_MSVCRT_READFIX
473 LIBBASEFILES = $(CRYPT_LIB) \
474 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
475 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
476 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
479 # win64 doesn't have some libs
480 .IF "$(WIN64)" != "define"
481 LIBBASEFILES += odbc32.lib odbccp32.lib
484 # we add LIBC here, since we may be using PerlCRT.dll
485 LIBFILES = $(LIBBASEFILES) $(LIBC)
487 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
488 $(PCHFLAGS) $(OPTIMIZE)
489 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
490 -libpath:"$(INST_COREDIR)" \
491 -machine:$(PROCESSOR_ARCHITECTURE)
498 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
500 # used to allow local linking flags that are not propogated into Config.pm,
504 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
506 #################### do not edit below this line #######################
507 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
519 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
522 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
525 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
531 .IF "$(CCTYPE)" == "BORLAND"
532 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
533 $(IMPLIB) $(*B).lib $@
534 .ELIF "$(CCTYPE)" == "GCC"
535 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
536 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
538 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
539 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
547 MINIPERL = ..\miniperl.exe
549 PERLEXE = ..\perl.exe
550 WPERLEXE = ..\wperl.exe
551 GLOBEXE = ..\perlglob.exe
552 CONFIGPM = ..\lib\Config.pm
553 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
556 # Nominate a target which causes extensions to be re-built
557 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
558 # on and really only the interface - i.e. the .def file used to export symbols
560 PERLDEP = perldll.def
563 PL2BAT = bin\pl2bat.pl
564 GLOBBAT = bin\perlglob.bat
592 ..\lib\ExtUtils\xsubpp \
599 .IF "$(CCTYPE)" == "BORLAND"
601 CFGSH_TMPL = config.bc
602 CFGH_TMPL = config_H.bc
604 .ELIF "$(CCTYPE)" == "GCC"
606 CFGSH_TMPL = config.gc
607 CFGH_TMPL = config_H.gc
608 PERLIMPLIB = ..\libperl59$(a)
612 .IF "$(WIN64)" == "define"
613 CFGSH_TMPL = config.vc64
614 CFGH_TMPL = config_H.vc64
616 CFGSH_TMPL = config.vc
617 CFGH_TMPL = config_H.vc
622 # makedef.pl must be updated if this changes, and this should normally
623 # only change when there is an incompatible revision of the public API.
624 PERLIMPLIB *= ..\perl59$(a)
625 PERLDLL = ..\perl59.dll
627 XCOPY = xcopy /f /r /i /d
628 RCOPY = xcopy /f /r /i /e /d
632 # filenames given to xsubpp must have forward slashes (since it puts
633 # full pathnames in #line strings)
634 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
673 EXTRACORE_SRC += perllib.c
675 .IF "$(PERL_MALLOC)" == "define"
676 EXTRACORE_SRC += ..\malloc.c
679 EXTRACORE_SRC += ..\perlio.c
686 # We need this for miniperl build unless we override canned
687 # config.h #define building mini\*
688 #.IF "$(USE_PERLIO)" == "define"
689 WIN32_SRC += .\win32io.c
692 .IF "$(CRYPT_SRC)" != ""
693 WIN32_SRC += .\$(CRYPT_SRC)
696 DLL_SRC = $(DYNALOADER).c
742 .\include\sys\socket.h \
745 CORE_H = $(CORE_NOCFG_H) .\config.h
747 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
748 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
749 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
750 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
751 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
752 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
753 DLL_OBJ = $(DLL_SRC:db:+$(o))
754 X2P_OBJ = $(X2P_SRC:db:+$(o))
756 PERLDLL_OBJ = $(CORE_OBJ)
757 PERLEXE_OBJ = perlmain$(o)
759 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
761 .IF "$(USE_SETARGV)" != ""
762 SETARGV_OBJ = setargv$(o)
765 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
766 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
767 Sys/Hostname Storable Filter/Util/Call Encode \
768 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
770 STATIC_EXT = DynaLoader
773 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
775 POD2HTML = $(PODDIR)\pod2html
776 POD2MAN = $(PODDIR)\pod2man
777 POD2LATEX = $(PODDIR)\pod2latex
778 POD2TEXT = $(PODDIR)\pod2text
780 # vars must be separated by "\t+~\t+", since we're using the tempfile
781 # version of config_sh.pl (we were overflowing someone's buffer by
782 # trying to fit them all on the command line)
785 INST_DRV=$(INST_DRV) ~ \
786 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
787 INST_VER=$(INST_VER:s/\/\\/) ~ \
788 INST_ARCH=$(INST_ARCH) ~ \
789 archname=$(ARCHNAME) ~ \
792 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
793 cf_email=$(EMAIL) ~ \
794 d_crypt=$(D_CRYPT) ~ \
795 d_mymalloc=$(PERL_MALLOC) ~ \
796 libs=$(LIBFILES:f) ~ \
797 incpath=$(CCINCDIR:s/\/\\/) ~ \
798 libperl=$(PERLIMPLIB:f) ~ \
799 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
806 static_ext=$(STATIC_EXT) ~ \
807 useithreads=$(USE_ITHREADS) ~ \
808 usemultiplicity=$(USE_MULTI) ~ \
809 useperlio=$(USE_PERLIO) ~ \
810 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
814 # set up targets varying between Win95 and WinNT builds
817 .IF "$(IS_WIN95)" == "define"
819 RIGHTMAKE = __switch_makefiles
830 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
831 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
834 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
836 #----------------------------------------------------------------
838 #-------------------- BEGIN Win95 SPECIFIC ----------------------
840 # this target is a jump-off point for Win95
841 # 1. it switches to the Win95-specific makefile if it exists
842 # (__do_switch_makefiles)
843 # 2. it prints a message when the Win95-specific one finishes (__done)
844 # 3. it then kills this makefile by trying to make __no_such_target
846 __switch_makefiles: __do_switch_makefiles __done __no_such_target
848 __do_switch_makefiles:
849 .IF "$(NOTFIRST)" != "true"
850 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
855 .IF "$(NOTFIRST)" != "true"
857 @echo Build process complete. Ignore any errors after this message.
858 @echo Run "dmake test" to test and "dmake install" to install
861 # dummy targets for Win95-specific makefile
871 # This target is used to generate the new makefile (.\makefile.95) for Win95
873 .\makefile.95: .\makefile.mk
874 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
876 #--------------------- END Win95 SPECIFIC ---------------------
878 # a blank target for when builds don't need to do certain things
879 # this target added for Win95 port but used to keep the WinNT port able to
884 $(GLOBEXE) : perlglob$(o)
885 .IF "$(CCTYPE)" == "BORLAND"
886 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
887 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
888 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
889 .ELIF "$(CCTYPE)" == "GCC"
890 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
892 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
893 perlglob$(o) setargv$(o)
896 perlglob$(o) : perlglob.c
898 config.w32 : $(CFGSH_TMPL)
899 copy $(CFGSH_TMPL) config.w32
901 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
903 copy $(CFGH_TMPL) config.h
905 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
906 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
907 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
909 # this target is for when changes to the main config.sh happen
910 # edit config.{b,v,g}c and make this target once for each supported
911 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
913 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
914 $(CFGSH_TMPL) > ..\config.sh
915 -cd .. && del /f perl.exe
916 -cd .. && del /f perl*.dll
917 cd .. && perl configpm
920 -perl config_h.PL "INST_VER=$(INST_VER)"
921 rename config.h $(CFGH_TMPL)
923 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
924 cd .. && miniperl configpm
925 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
926 $(XCOPY) ..\*.h $(COREDIR)\*.*
927 $(XCOPY) *.h $(COREDIR)\*.*
928 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
929 $(RCOPY) include $(COREDIR)\*.*
930 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
931 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
933 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
934 .IF "$(CCTYPE)" == "BORLAND"
935 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
936 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
937 .ELIF "$(CCTYPE)" == "GCC"
938 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
939 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
941 $(LINK32) -subsystem:console -out:$@ \
942 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
946 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
948 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
949 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
951 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
952 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
954 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
955 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
956 # unless the .IF is true), so instead we use a .ELSE with the default.
957 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
959 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
960 .IF "$(USE_IMP_SYS)" == "define"
961 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
963 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
966 # 1. we don't want to rebuild miniperl.exe when config.h changes
967 # 2. we don't want to rebuild miniperl.exe with non-default config.h
968 $(MINI_OBJ) : $(CORE_NOCFG_H)
970 $(WIN32_OBJ) : $(CORE_H)
971 $(CORE_OBJ) : $(CORE_H)
972 $(DLL_OBJ) : $(CORE_H)
973 $(X2P_OBJ) : $(CORE_H)
975 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
976 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
977 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
979 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
980 .IF "$(CCTYPE)" == "BORLAND"
981 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
982 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
987 .ELIF "$(CCTYPE)" == "GCC"
988 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
989 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
990 dlltool --output-lib $(PERLIMPLIB) \
991 --dllname $(PERLDLL:b).dll \
993 --base-file perl.base \
994 --output-exp perl.exp
995 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
996 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
999 $(LINK32) -dll -def:perldll.def -out:$@ \
1000 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1001 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1003 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1005 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1006 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1008 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1009 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1011 ..\x2p\hash$(o) : ..\x2p\hash.c
1012 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1014 ..\x2p\str$(o) : ..\x2p\str.c
1015 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1017 ..\x2p\util$(o) : ..\x2p\util.c
1018 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1020 ..\x2p\walk$(o) : ..\x2p\walk.c
1021 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1023 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1024 $(MINIPERL) ..\x2p\find2perl.PL
1025 $(MINIPERL) ..\x2p\s2p.PL
1026 .IF "$(CCTYPE)" == "BORLAND"
1027 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1028 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1029 .ELIF "$(CCTYPE)" == "GCC"
1030 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1031 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1033 $(LINK32) -subsystem:console -out:$@ \
1034 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1037 perlmain.c : runperl.c
1038 copy runperl.c perlmain.c
1040 perlmain$(o) : perlmain.c
1041 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1043 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1044 .IF "$(CCTYPE)" == "BORLAND"
1045 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1046 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1048 $(PERLIMPLIB) $(LIBFILES)\n)
1049 .ELIF "$(CCTYPE)" == "GCC"
1050 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1051 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1053 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1054 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1056 copy $(PERLEXE) $(WPERLEXE)
1057 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1058 copy splittree.pl ..
1059 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1061 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1062 if not exist $(AUTODIR) mkdir $(AUTODIR)
1063 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1064 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1065 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1066 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1067 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1068 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1070 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1071 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1073 #----------------------------------------------------------------------------------
1074 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1075 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1078 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1080 #----------------------------------------------------------------------------------
1084 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1085 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1086 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1088 utils: $(PERLEXE) $(X2P)
1089 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1090 copy ..\README.aix ..\pod\perlaix.pod
1091 copy ..\README.amiga ..\pod\perlamiga.pod
1092 copy ..\README.apollo ..\pod\perlapollo.pod
1093 copy ..\README.beos ..\pod\perlbeos.pod
1094 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1095 copy ..\README.ce ..\pod\perlce.pod
1096 copy ..\README.cygwin ..\pod\perlcygwin.pod
1097 copy ..\README.dgux ..\pod\perldgux.pod
1098 copy ..\README.dos ..\pod\perldos.pod
1099 copy ..\README.epoc ..\pod\perlepoc.pod
1100 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1101 copy ..\README.hpux ..\pod\perlhpux.pod
1102 copy ..\README.hurd ..\pod\perlhurd.pod
1103 copy ..\README.irix ..\pod\perlirix.pod
1104 copy ..\README.machten ..\pod\perlmachten.pod
1105 copy ..\README.macos ..\pod\perlmacos.pod
1106 copy ..\README.mint ..\pod\perlmint.pod
1107 copy ..\README.mpeix ..\pod\perlmpeix.pod
1108 copy ..\README.netware ..\pod\perlnetware.pod
1109 copy ..\README.os2 ..\pod\perlos2.pod
1110 copy ..\README.os390 ..\pod\perlos390.pod
1111 copy ..\README.os400 ..\pod\perlos400.pod
1112 copy ..\README.plan9 ..\pod\perlplan9.pod
1113 copy ..\README.qnx ..\pod\perlqnx.pod
1114 copy ..\README.solaris ..\pod\perlsolaris.pod
1115 copy ..\README.tru64 ..\pod\perltru64.pod
1116 copy ..\README.uts ..\pod\perluts.pod
1117 copy ..\README.vmesa ..\pod\perlvmesa.pod
1118 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1119 copy ..\README.vos ..\pod\perlvos.pod
1120 copy ..\README.win32 ..\pod\perlwin32.pod
1121 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1122 cd ..\lib && $(PERLEXE) lib_pm.PL
1123 $(PERLEXE) $(PL2BAT) $(UTILS)
1126 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1127 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1129 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1130 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1131 -del /f $(LIBDIR)\XSLoader.pm
1132 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1133 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1134 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1135 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1136 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1137 -del /f $(LIBDIR)\PerlIO\scalar.pm
1138 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1139 -del /f $(LIBDIR)\File\Glob.pm
1140 -del /f $(LIBDIR)\Storable.pm
1141 -del /f $(LIBDIR)\Filter\Util\Call.pm
1142 -del /f $(LIBDIR)\Digest\MD5.pm
1143 -del /f $(LIBDIR)\MIME\Base64.pm
1144 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1145 -del /f $(LIBDIR)\Time\HiRes.pm
1146 -del /f $(LIBDIR)\List\Util.pm
1147 -del /f $(LIBDIR)\Scalar\Util.pm
1148 -del /f $(LIBDIR)\Unicode\Normalize.pm
1149 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
1150 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
1151 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
1152 -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
1153 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
1154 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
1155 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
1156 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
1157 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
1158 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1159 perlaix.pod perlamiga.pod perlapollo.pod \
1160 perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1161 perldos.pod perlepoc.pod perlfreebsd.pod perlhpux.pod perlhurd.pod \
1162 perlirix.pod perlmachten.pod perlmint.pod \
1163 perlmacos.pod perlmpeix.pod perlnetware.pod \
1164 perlos2.pod perlos390.pod perlos400.pod \
1165 perlplan9.pod perlqnx.pod \
1166 perlsolaris.pod perltru64.pod perluts.pod \
1167 perlvmesa.pod perlvms.pod perlvos.pod \
1168 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1169 podchecker podselect
1170 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1171 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv *.bat
1172 -cd ..\x2p && del /f find2perl s2p psed *.bat
1173 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1176 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1177 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1178 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
1179 -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
1181 install : all installbare installhtml
1183 installbare : $(RIGHTMAKE) utils
1184 $(PERLEXE) ..\installperl
1185 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1186 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1187 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1190 $(RCOPY) html\*.* $(INST_HTML)\*.*
1192 inst_lib : $(CONFIGPM)
1193 copy splittree.pl ..
1194 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1195 $(RCOPY) ..\lib $(INST_LIB)\*.*
1197 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1198 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1199 .IF "$(CCTYPE)" == "BORLAND"
1200 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1202 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1207 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1209 test-prep : all utils
1210 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1211 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1212 .IF "$(CCTYPE)" == "BORLAND"
1213 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1215 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1218 test : $(RIGHTMAKE) test-prep
1219 cd ..\t && $(PERLEXE) -I..\lib harness
1221 test-notty : test-prep
1222 set PERL_SKIP_TTY_TEST=1 && \
1223 cd ..\t && $(PERLEXE) -I.\lib harness
1225 test-wide : test-prep
1226 set HARNESS_PERL_SWITCHES=-C && \
1227 cd ..\t && $(PERLEXE) -I..\lib harness
1229 test-wide-notty : test-prep
1230 set PERL_SKIP_TTY_TEST=1 && \
1231 set HARNESS_PERL_SWITCHES=-C && \
1232 cd ..\t && $(PERLEXE) -I..\lib harness
1234 _test : $(RIGHTMAKE)
1235 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1236 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1237 .IF "$(CCTYPE)" == "BORLAND"
1238 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1240 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1242 cd ..\t && $(PERLEXE) -I..\lib harness
1244 clean : Extensions_clean
1245 -@erase miniperlmain$(o)
1247 -@erase perlglob$(o)
1248 -@erase perlmain$(o)
1256 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
1257 -@erase $(WIN32_OBJ)
1260 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1261 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1262 -@erase ..\x2p\*.exe ..\x2p\*.bat
1266 # Handy way to run perlbug -ok without having to install and run the
1267 # installed perlbug. We don't re-run the tests here - we trust the user.
1268 # Please *don't* use this unless all tests pass.
1269 # If you want to report test failures, use "dmake nok" instead.
1271 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1274 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1277 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1280 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok