2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 or later
5 # Borland C++ 5.02 or later
6 # MinGW with gcc-2.95.2 or later
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl511.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual C++ 98)
101 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
105 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
106 #CCTYPE *= MSVC80FREE
107 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
110 #CCTYPE *= MSVC90FREE
111 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
113 # Borland 5.02 or later
115 # MinGW with gcc-2.95.2 or later
119 # uncomment this if your Borland compiler is older than v5.4.
122 # uncomment this if you want to use Borland's VCL as your CRT
126 # uncomment this if you are compiling under Windows 95/98 and command.com
127 # (not needed if you're running under 4DOS/NT 6.01 or later)
131 # uncomment next line if you want debug version of perl (big,slow)
132 # If not enabled, we automatically try to use maximum optimization
133 # with all compilers that are known to have a working optimizer.
138 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
139 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
140 # This currently requires VC 5.0 with Service Pack 3 or later.
141 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
142 # and follow the directions in the package to install.
144 # Not recommended if you have VC 6.x and you're not running Windows 9x.
146 #USE_PERLCRT *= define
149 # uncomment to enable linking with setargv.obj under the Visual C
150 # compiler. Setting this options enables perl to expand wildcards in
151 # arguments, but it may be harder to use alternate methods like
152 # File::DosGlob that are more powerful. This option is supported only with
155 #USE_SETARGV *= define
158 # if you want to have the crypt() builtin function implemented, leave this or
159 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
160 # version of des_fcrypt().
162 CRYPT_SRC *= fcrypt.c
165 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
166 # library, uncomment this, and make sure the library exists (see README.win32)
167 # Specify the full pathname of the library.
169 #CRYPT_LIB *= fcrypt.lib
172 # set this if you wish to use perl's malloc
173 # WARNING: Turning this on/off WILL break binary compatibility with extensions
174 # you may have compiled with/without it. Be prepared to recompile all
175 # extensions if you change the default. Currently, this cannot be enabled
176 # if you ask for USE_IMP_SYS above.
178 #PERL_MALLOC *= define
181 # set this to enable debugging mstats
182 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
183 # be enabled without PERL_MALLOC as well.
185 #DEBUG_MSTATS *= define
188 # set this to additionally provide a statically linked perl-static.exe.
189 # Note that dynamic loading will not work with this perl, so you must
190 # include required modules statically using the STATIC_EXT or ALL_STATIC
191 # variables below. A static library perl511s.lib will also be created.
192 # Ordinary perl.exe is not affected by this option.
194 #BUILD_STATIC *= define
197 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
198 # extension get statically built
199 # This will result in a very large perl executable, but the main purpose
200 # is to have proper linking set so as to be able to create miscellaneous
201 # executables with different built-in extensions
203 #ALL_STATIC *= define
206 # set the install locations of the compiler include/libraries
207 # Running VCVARS32.BAT is *required* when using Visual C.
208 # Some versions of Visual C don't define MSVCDIR in the environment,
209 # so you may have to set CCHOME explicitly (spaces in the path name should
212 .IF "$(CCTYPE)" == "BORLAND"
213 CCHOME *= C:\Borland\BCC55
214 .ELIF "$(CCTYPE)" == "GCC"
219 CCINCDIR *= $(CCHOME)\include
220 CCLIBDIR *= $(CCHOME)\lib
223 # Additional compiler flags can be specified here.
225 BUILDOPT *= $(BUILDOPTEXTRA)
228 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
229 # internal hash function unless the PERL_HASH_SEED environment variable is set.
230 # Alternatively, adding -DNO_HASH_SEED will completely disable the
231 # randomization feature.
232 # The latter is required to maintain binary compatibility with Perl 5.8.0.
234 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
235 #BUILDOPT += -DNO_HASH_SEED
238 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
239 # for old symbols by default, at the expense of extreme pollution. You most
240 # probably just want to build modules that won't compile with
241 # perl Makefile.PL POLLUTE=1
242 # instead of enabling this. Please report such modules to the respective
245 #BUILDOPT += -DPERL_POLLUTE
248 # This should normally be disabled. Enabling it will disable the File::Glob
249 # implementation of CORE::glob.
251 #BUILDOPT += -DPERL_EXTERNAL_GLOB
254 # This should normally be disabled. Enabling it causes perl to read scripts
255 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
257 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
260 # specify semicolon-separated list of extra directories that modules will
261 # look for libraries (spaces in path names need not be quoted)
266 # set this to point to cmd.exe (only needed if you use some
267 # alternate shell that doesn't grok cmd.exe style commands)
269 #SHELL *= g:\winnt\system32\cmd.exe
272 # set this to your email address (perl will guess a value from
273 # from your loginname and your hostname, which may not be right)
278 ## Build configuration ends.
281 ##################### CHANGE THESE ONLY IF YOU MUST #####################
283 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
287 CRYPT_FLAG = -DHAVE_DES_FCRYPT
291 DEBUG_MSTATS *= undef
293 USE_SITECUST *= undef
295 USE_ITHREADS *= undef
298 USE_LARGE_FILES *= undef
301 .IF "$(USE_IMP_SYS)" == "define"
305 .IF "$(PERL_MALLOC)" == "undef"
309 .IF "$(DEBUG_MSTATS)" == "define"
310 BUILDOPT += -DPERL_DEBUGGING_MSTATS
313 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
317 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
321 .IF "$(USE_SITECUST)" == "define"
322 BUILDOPT += -DUSE_SITECUSTOMIZE
325 .IF "$(USE_MULTI)" != "undef"
326 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
329 .IF "$(USE_IMP_SYS)" != "undef"
330 BUILDOPT += -DPERL_IMPLICIT_SYS
333 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
335 PROCESSOR_ARCHITECTURE *= x86
338 # When we are running from a 32bit cmd.exe on AMD64 then
339 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
341 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
342 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
344 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
351 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
352 .IF "$(ARCHITECTURE)" == "AMD64"
355 .IF "$(ARCHITECTURE)" == "IA64"
359 .IF "$(USE_MULTI)" == "define"
360 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
362 .IF "$(USE_PERLIO)" == "define"
363 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
365 ARCHNAME = MSWin32-$(ARCHITECTURE)
369 .IF "$(USE_ITHREADS)" == "define"
370 ARCHNAME !:= $(ARCHNAME)-thread
373 # Visual C++ 98, .NET 2003, 2005 and 2008 specific.
374 # VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
375 # in about 10% less time. (The free version of 7.x can't do this, but the free
376 # versions of 8.x and 9.x can.)
377 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
378 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" ||
379 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
380 DELAYLOAD *= -DELAYLOAD:ws2_32.dll delayimp.lib
383 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
384 # DLLs. These either need copying everywhere with the binaries, or else need
385 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
386 # simplicity, embed them if they exist (and delete them afterwards so that they
387 # don't get installed too).
388 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
389 if exist $@.manifest del $@.manifest
390 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
391 if exist $@.manifest del $@.manifest
393 ARCHDIR = ..\lib\$(ARCHNAME)
394 COREDIR = ..\lib\CORE
395 AUTODIR = ..\lib\auto
399 EXTUTILSDIR = $(LIBDIR)\ExtUtils
403 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
404 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
405 INST_LIB = $(INST_TOP)$(INST_VER)\lib
406 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
407 INST_COREDIR = $(INST_ARCHLIB)\CORE
408 INST_HTML = $(INST_TOP)$(INST_VER)\html
411 # Programs to compile, build .lib files and link
416 .IF "$(CCTYPE)" == "BORLAND"
419 .IF "$(BCCOLD)" != "define"
424 LIB32 = tlib /a /P128
431 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
432 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
433 DEFINES = -DWIN32 $(CRYPT_FLAG)
434 LOCDEFS = -DPERLDLL -DPERL_CORE
440 # same libs as MSVC, except Borland doesn't have oldnames.lib
441 LIBFILES = $(CRYPT_LIB) \
442 kernel32.lib user32.lib gdi32.lib winspool.lib \
443 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
444 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
445 version.lib odbc32.lib odbccp32.lib \
448 .IF "$(CFG)" == "Debug"
449 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
452 OPTIMIZE = -O2 -D_RTLDLL
457 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
458 $(PCHFLAGS) $(OPTIMIZE)
459 LINK_FLAGS = $(LINK_DBG) -x -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
464 .IF "$(BCCOLD)" != "define"
466 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
468 .IF "$(BCCVCL)" == "define"
469 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
470 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
474 .ELIF "$(CCTYPE)" == "GCC"
490 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
491 DEFINES = -DWIN32 $(CRYPT_FLAG)
492 LOCDEFS = -DPERLDLL -DPERL_CORE
499 LIBFILES = $(CRYPT_LIB) $(LIBC) \
500 -lmoldname -lkernel32 -luser32 -lgdi32 \
501 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
502 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
503 -lwinmm -lversion -lodbc32 -lodbccp32
505 .IF "$(CFG)" == "Debug"
506 OPTIMIZE = -g -O2 -DDEBUGGING
514 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
515 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
520 # NOTE: we assume that GCC uses MSVCRT.DLL
521 # See comments about PERL_MSVCRT_READFIX in the "cl" compiler section below.
522 BUILDOPT += -fno-strict-aliasing -mms-bitfields -DPERL_MSVCRT_READFIX
528 LIB32 = $(LINK32) -lib
535 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
536 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
537 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
538 LOCDEFS = -DPERLDLL -DPERL_CORE
542 .IF "$(USE_PERLCRT)" != "define"
548 .IF "$(CFG)" == "Debug"
549 .IF "$(CCTYPE)" == "MSVC20"
550 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
552 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
556 OPTIMIZE = -MD -Zi -DNDEBUG
557 # we enable debug symbols in release builds also
558 LINK_DBG = -debug -opt:ref,icf
559 # you may want to enable this if you want COFF symbols in the executables
560 # in addition to the PDB symbols. The default Dr. Watson that ships with
561 # Windows can use the the former but not latter. The free WinDbg can be
562 # installed to get better stack traces from just the PDB symbols, so we
563 # avoid the bloat of COFF symbols by default.
564 #LINK_DBG = $(LINK_DBG) -debugtype:both
565 .IF "$(WIN64)" == "define"
566 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
570 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
576 .IF "$(WIN64)" == "define"
577 DEFINES += -DWIN64 -DCONSERVATIVE
578 OPTIMIZE += -Wp64 -fp:precise
581 # For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
582 # and POSIX CRT function names being deprecated.
583 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
584 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
585 DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
588 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
589 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
590 # do not require the fix.
591 .IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
592 .IF "$(USE_PERLCRT)" != "define"
593 BUILDOPT += -DPERL_MSVCRT_READFIX
597 LIBBASEFILES = $(CRYPT_LIB) \
598 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
599 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
600 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
601 version.lib odbc32.lib odbccp32.lib
603 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
604 # include the buffer overrun verification code used by the /GS switch.
605 # Since the code links against libraries that are compiled with /GS, this
606 # "security cookie verification" must be included via bufferoverlow.lib.
607 .IF "$(WIN64)" == "define"
608 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
611 # we add LIBC here, since we may be using PerlCRT.dll
612 LIBFILES = $(LIBBASEFILES) $(LIBC)
614 EXTRACFLAGS = -nologo -GF -W3
615 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
616 $(PCHFLAGS) $(OPTIMIZE)
617 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
618 -libpath:"$(INST_COREDIR)" \
619 -machine:$(PROCESSOR_ARCHITECTURE)
627 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
629 # used to allow local linking flags that are not propogated into Config.pm,
633 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
635 #################### do not edit below this line #######################
636 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
638 # Some old dmakes (including Sarathy's one at
639 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip)
640 # don't support logical OR (||) or logical AND (&&) in conditional
641 # expressions and hence don't process this makefile correctly. Determine
642 # whether this is the case so that we can give the user an error message.
659 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
662 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
665 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
671 .IF "$(CCTYPE)" == "BORLAND"
672 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
673 $(IMPLIB) $(*B).lib $@
674 .ELIF "$(CCTYPE)" == "GCC"
675 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
676 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
678 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
679 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
684 .IF "$(CCTYPE)" == "GCC"
685 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -i $< -o $@
692 MINIPERL = ..\miniperl.exe
694 PERLEXE = ..\perl.exe
695 WPERLEXE = ..\wperl.exe
696 PERLEXESTATIC = ..\perl-static.exe
697 GLOBEXE = ..\perlglob.exe
698 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
699 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
701 GENUUDMAP = ..\generate_uudmap.exe
702 .IF "$(BUILD_STATIC)" == "define"
708 # Unicode data files generated by mktables
709 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
710 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
711 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
712 ..\lib\unicore\PVA.pl
714 # Directories of Unicode data files generated by mktables
715 UNIDATADIR1 = ..\lib\unicore\To
716 UNIDATADIR2 = ..\lib\unicore\lib
718 PERLEXE_ICO = .\perlexe.ico
719 PERLEXE_RES = .\perlexe.res
722 # Nominate a target which causes extensions to be re-built
723 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
724 # on and really only the interface - i.e. the .def file used to export symbols
726 PERLDEP = perldll.def
729 PL2BAT = bin\pl2bat.pl
730 GLOBBAT = bin\perlglob.bat
746 ..\utils\config_data \
753 ..\utils\cpanp-run-perl \
774 .IF "$(CCTYPE)" == "BORLAND"
776 CFGSH_TMPL = config.bc
777 CFGH_TMPL = config_H.bc
779 .ELIF "$(CCTYPE)" == "GCC"
781 CFGSH_TMPL = config.gc
782 CFGH_TMPL = config_H.gc
783 PERLIMPLIB = ..\libperl511$(a)
784 PERLSTATICLIB = ..\libperl511s$(a)
788 .IF "$(WIN64)" == "define"
789 CFGSH_TMPL = config.vc64
790 CFGH_TMPL = config_H.vc64
792 CFGSH_TMPL = config.vc
793 CFGH_TMPL = config_H.vc
798 # makedef.pl must be updated if this changes, and this should normally
799 # only change when there is an incompatible revision of the public API.
800 PERLIMPLIB *= ..\perl511$(a)
801 PERLSTATICLIB *= ..\perl511s$(a)
802 PERLDLL = ..\perl511.dll
804 XCOPY = xcopy /f /r /i /d /y
805 RCOPY = xcopy /f /r /i /e /d /y
809 # filenames given to xsubpp must have forward slashes (since it puts
810 # full pathnames in #line strings)
811 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
851 EXTRACORE_SRC += perllib.c
853 .IF "$(PERL_MALLOC)" == "define"
854 EXTRACORE_SRC += ..\malloc.c
857 EXTRACORE_SRC += ..\perlio.c
864 # We need this for miniperl build unless we override canned
865 # config.h #define building mini\*
866 #.IF "$(USE_PERLIO)" == "define"
867 WIN32_SRC += .\win32io.c
870 .IF "$(CRYPT_SRC)" != ""
871 WIN32_SRC += .\$(CRYPT_SRC)
874 DLL_SRC = $(DYNALOADER).c
920 .\include\sys\socket.h \
923 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
925 UUDMAP_H = ..\uudmap.h
926 BITCOUNT_H = ..\bitcount.h
928 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
929 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
930 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
931 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
932 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
933 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
934 DLL_OBJ = $(DLL_SRC:db:+$(o))
935 X2P_OBJ = $(X2P_SRC:db:+$(o))
936 GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
938 PERLDLL_OBJ = $(CORE_OBJ)
939 PERLEXE_OBJ = perlmain$(o)
940 PERLEXEST_OBJ = perlmainst$(o)
942 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
944 .IF "$(USE_SETARGV)" != ""
945 SETARGV_OBJ = setargv$(o)
948 .IF "$(ALL_STATIC)" == "define"
949 # some exclusions, unfortunately, until fixed:
950 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
951 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
952 # - Encode (encoding search algorithm relies on shared library?)
953 STATIC_EXT = * !Win32 !SDBM_File !Encode
955 # specify static extensions here, for example:
956 #STATIC_EXT = Cwd Compress/Raw/Zlib
957 STATIC_EXT = Win32CORE
960 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
962 # vars must be separated by "\t+~\t+", since we're using the tempfile
963 # version of config_sh.pl (we were overflowing someone's buffer by
964 # trying to fit them all on the command line)
967 INST_DRV=$(INST_DRV) ~ \
968 INST_TOP=$(INST_TOP) ~ \
969 INST_VER=$(INST_VER) ~ \
970 INST_ARCH=$(INST_ARCH) ~ \
971 archname=$(ARCHNAME) ~ \
974 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
975 cf_email=$(EMAIL) ~ \
976 d_crypt=$(D_CRYPT) ~ \
977 d_mymalloc=$(PERL_MALLOC) ~ \
978 libs=$(LIBFILES:f) ~ \
979 incpath=$(CCINCDIR) ~ \
980 libperl=$(PERLIMPLIB:f) ~ \
981 libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
988 static_ext=$(STATIC_EXT) ~ \
989 usethreads=$(USE_ITHREADS) ~ \
990 useithreads=$(USE_ITHREADS) ~ \
991 usemultiplicity=$(USE_MULTI) ~ \
992 useperlio=$(USE_PERLIO) ~ \
993 uselargefiles=$(USE_LARGE_FILES) ~ \
994 usesitecustomize=$(USE_SITECUST) ~ \
995 LINK_FLAGS=$(LINK_FLAGS) ~ \
999 # set up targets varying between Win95 and WinNT builds
1002 .IF "$(IS_WIN95)" == "define"
1004 RIGHTMAKE = __switch_makefiles
1010 .IMPORT .IGNORE : SystemRoot windir
1012 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
1013 ENV_OS=$(subst,OS=, $(shell @set OS))
1015 .IF "$(ENV_OS)" == "Windows_NT"
1016 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
1018 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
1025 all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1026 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
1027 $(PERLEXE) $(X2P) Extensions $(PERLSTATIC)
1029 ..\regcharclass.h : ..\Porting\regcharclass.pl
1030 cd .. && miniperl Porting\regcharclass.pl && cd win32
1032 regnodes : ..\regnodes.h
1034 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
1036 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
1038 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1039 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
1040 $(X2P) Extensions_reonly
1042 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
1044 static: $(PERLEXESTATIC)
1046 #----------------------------------------------------------------
1048 #-------------------- BEGIN Win95 SPECIFIC ----------------------
1050 # this target is a jump-off point for Win95
1051 # 1. it switches to the Win95-specific makefile if it exists
1052 # (__do_switch_makefiles)
1053 # 2. it prints a message when the Win95-specific one finishes (__done)
1054 # 3. it then kills this makefile by trying to make __no_such_target
1056 __switch_makefiles: __do_switch_makefiles __done __no_such_target
1058 __do_switch_makefiles:
1059 .IF "$(NOTFIRST)" != "true"
1060 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
1065 .IF "$(NOTFIRST)" != "true"
1067 @echo Build process complete. Ignore any errors after this message.
1068 @echo Run "dmake test" to test and "dmake install" to install
1071 # dummy targets for Win95-specific makefile
1081 # This target is used to generate the new makefile (.\makefile.95) for Win95
1083 .\makefile.95: .\makefile.mk
1084 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1086 #--------------------- END Win95 SPECIFIC ---------------------
1088 # a blank target for when builds don't need to do certain things
1089 # this target added for Win95 port but used to keep the WinNT port able to
1095 .IF "$(NEWDMAKE)" == "define"
1098 @echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions.
1099 @echo Please get the latest dmake from http://search.cpan.org/dist/dmake/
1103 $(GLOBEXE) : perlglob$(o)
1104 .IF "$(CCTYPE)" == "BORLAND"
1105 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1106 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1107 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1108 .ELIF "$(CCTYPE)" == "GCC"
1109 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1111 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1112 perlglob$(o) setargv$(o)
1116 perlglob$(o) : perlglob.c
1118 config.w32 : $(CFGSH_TMPL)
1119 copy $(CFGSH_TMPL) config.w32
1121 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1123 copy $(CFGH_TMPL) config.h
1125 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
1126 cd .. && miniperl -Ilib make_patchnum.pl
1128 # make sure that we recompile perl.c if the git version changes
1129 ..\perl$(o) : ..\git_version.h
1131 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1132 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1133 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1135 # this target is for when changes to the main config.sh happen.
1136 # edit config.gc, then make perl using GCC in a minimal configuration (i.e.
1137 # with MULTI, ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make
1138 # this target to regenerate config_H.gc.
1139 # unfortunately, some further manual editing is also then required to restore all
1140 # the special _MSC_VER handling that is otherwise lost.
1141 # repeat for config.bc and config_H.bc (using BORLAND), except that there is no
1142 # _MSC_VER stuff in that case.
1144 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1145 $(CFGSH_TMPL) > ..\config.sh
1146 cd .. && miniperl configpm
1147 -del /f $(CFGH_TMPL)
1148 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
1149 rename config.h $(CFGH_TMPL)
1151 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1152 cd .. && miniperl configpm
1153 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1154 $(XCOPY) ..\*.h $(COREDIR)\*.*
1155 $(XCOPY) *.h $(COREDIR)\*.*
1156 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1157 $(RCOPY) include $(COREDIR)\*.*
1158 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1159 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1161 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1162 .IF "$(CCTYPE)" == "BORLAND"
1163 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1164 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1165 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1166 @$(mktmp c0x32$(o) $(MINI_OBJ),$@,,$(LIBFILES),)
1167 .ELIF "$(CCTYPE)" == "GCC"
1168 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1169 $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
1171 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1172 @$(mktmp $(LIBFILES) $(MINI_OBJ))
1177 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1179 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1180 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c
1182 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1183 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1185 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1186 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1187 # unless the .IF is true), so instead we use a .ELSE with the default.
1188 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1190 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1191 .IF "$(USE_IMP_SYS)" == "define"
1192 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1194 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1197 # 1. we don't want to rebuild miniperl.exe when config.h changes
1198 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1199 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
1200 $(MINI_OBJ) : $(CORE_NOCFG_H)
1202 $(WIN32_OBJ) : $(CORE_H)
1204 $(CORE_OBJ) : $(CORE_H)
1206 $(DLL_OBJ) : $(CORE_H)
1208 $(X2P_OBJ) : $(CORE_H)
1210 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
1211 $(MINIPERL) -I..\lib create_perllibst_h.pl
1212 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1213 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1215 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1216 .IF "$(CCTYPE)" == "BORLAND"
1217 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1218 @$(mktmp c0d32$(o) $(PERLDLL_OBJ),$@,, \
1219 $(shell @type Extensions_static) $(LIBFILES),perldll.def)
1221 .ELIF "$(CCTYPE)" == "GCC"
1222 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1223 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1224 $(shell @type Extensions_static) \
1225 $(LIBFILES) $(LKPOST))
1226 dlltool --output-lib $(PERLIMPLIB) \
1227 --dllname $(PERLDLL:b).dll \
1229 --base-file perl.base \
1230 --output-exp perl.exp
1231 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1232 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1233 $(shell @type Extensions_static) \
1234 $(LIBFILES) perl.exp $(LKPOST))
1236 $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
1237 @Extensions_static \
1238 @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1239 $(PERLDLL_RES) $(PERLDLL_OBJ))
1242 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1244 $(PERLSTATICLIB): Extensions_static
1245 .IF "$(CCTYPE)" == "BORLAND"
1246 $(LIB32) $(LIB_FLAGS) $@ \
1247 @$(mktmp $(shell @type Extensions_static) \
1249 .ELIF "$(CCTYPE)" == "GCC"
1250 # XXX: It would be nice if MinGW's ar accepted a temporary file, but this
1251 # doesn't seem to work:
1252 # $(LIB32) $(LIB_FLAGS) $@ \
1253 # $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1254 # $(PERLDLL_OBJ) $(LKPOST))
1255 $(LIB32) $(LIB_FLAGS) $@ \
1256 $(shell @type Extensions_static) \
1259 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1260 @$(mktmp $(PERLDLL_OBJ))
1262 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1264 $(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
1265 $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
1267 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1269 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1270 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1272 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1273 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1275 ..\x2p\hash$(o) : ..\x2p\hash.c
1276 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1278 ..\x2p\str$(o) : ..\x2p\str.c
1279 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1281 ..\x2p\util$(o) : ..\x2p\util.c
1282 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1284 ..\x2p\walk$(o) : ..\x2p\walk.c
1285 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1287 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1288 $(MINIPERL) ..\x2p\find2perl.PL
1289 $(MINIPERL) ..\x2p\s2p.PL
1290 .IF "$(CCTYPE)" == "BORLAND"
1291 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1292 @$(mktmp c0x32$(o) $(X2P_OBJ),$@,,$(LIBFILES),)
1293 .ELIF "$(CCTYPE)" == "GCC"
1294 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1295 $(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST))
1297 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1298 @$(mktmp $(LIBFILES) $(X2P_OBJ))
1302 $(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
1304 $(UUDMAP_H) $(BITCOUNT_H) : $(GENUUDMAP)
1305 $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
1307 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1308 .IF "$(CCTYPE)" == "BORLAND"
1309 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1310 @$(mktmp c0x32$(o) $(GENUUDMAP_OBJ),$@,,$(LIBFILES),)
1311 .ELIF "$(CCTYPE)" == "GCC"
1312 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1313 $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
1315 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1316 @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ))
1320 perlmain.c : runperl.c
1321 copy runperl.c perlmain.c
1323 perlmain$(o) : perlmain.c
1324 $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c
1326 perlmainst.c : runperl.c
1327 copy runperl.c perlmainst.c
1329 perlmainst$(o) : perlmainst.c
1330 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1332 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1333 .IF "$(CCTYPE)" == "BORLAND"
1334 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1335 @$(mktmp c0x32$(o) $(PERLEXE_OBJ),$@,, \
1336 $(PERLIMPLIB) $(LIBFILES),,$(PERLEXE_RES))
1337 .ELIF "$(CCTYPE)" == "GCC"
1338 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1339 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1341 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1342 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1345 copy $(PERLEXE) $(WPERLEXE)
1346 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1347 copy splittree.pl ..
1348 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1350 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1351 .IF "$(CCTYPE)" == "BORLAND"
1352 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1353 @$(mktmp c0x32$(o) $(PERLEXEST_OBJ),$@,, \
1354 $(shell @type Extensions_static) $(PERLSTATICLIB) $(LIBFILES),, \
1356 .ELIF "$(CCTYPE)" == "GCC"
1357 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1358 $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1359 $(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) \
1360 $(PERLEXE_RES) $(LKPOST))
1362 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1363 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1364 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1368 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1369 if not exist $(AUTODIR) mkdir $(AUTODIR)
1370 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1371 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1372 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1373 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1374 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1375 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1377 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1378 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1380 MakePPPort: $(MINIPERL) $(CONFIGPM)
1381 $(MINIPERL) -I..\lib ..\mkppport
1384 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1386 #-------------------------------------------------------------------------------
1387 Extensions : ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1388 $(XCOPY) ..\*.h $(COREDIR)\*.*
1389 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynamic
1391 Extensions_reonly : ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1392 $(XCOPY) ..\*.h $(COREDIR)\*.*
1393 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynamic +re
1395 Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1396 $(XCOPY) ..\*.h $(COREDIR)\*.*
1397 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --static
1398 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1401 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all --target=clean
1403 Extensions_realclean :
1404 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all --target=realclean
1406 #-------------------------------------------------------------------------------
1410 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1411 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1412 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1414 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1415 # so please check that script before making structural changes here
1416 utils: $(PERLEXE) $(X2P)
1417 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1418 copy ..\README.aix ..\pod\perlaix.pod
1419 copy ..\README.amiga ..\pod\perlamiga.pod
1420 copy ..\README.apollo ..\pod\perlapollo.pod
1421 copy ..\README.beos ..\pod\perlbeos.pod
1422 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1423 copy ..\README.ce ..\pod\perlce.pod
1424 copy ..\README.cn ..\pod\perlcn.pod
1425 copy ..\README.cygwin ..\pod\perlcygwin.pod
1426 copy ..\README.dgux ..\pod\perldgux.pod
1427 copy ..\README.dos ..\pod\perldos.pod
1428 copy ..\README.epoc ..\pod\perlepoc.pod
1429 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1430 copy ..\README.haiku ..\pod\perlhaiku.pod
1431 copy ..\README.hpux ..\pod\perlhpux.pod
1432 copy ..\README.hurd ..\pod\perlhurd.pod
1433 copy ..\README.irix ..\pod\perlirix.pod
1434 copy ..\README.jp ..\pod\perljp.pod
1435 copy ..\README.ko ..\pod\perlko.pod
1436 copy ..\README.linux ..\pod\perllinux.pod
1437 copy ..\README.machten ..\pod\perlmachten.pod
1438 copy ..\README.macos ..\pod\perlmacos.pod
1439 copy ..\README.macosx ..\pod\perlmacosx.pod
1440 copy ..\README.mint ..\pod\perlmint.pod
1441 copy ..\README.mpeix ..\pod\perlmpeix.pod
1442 copy ..\README.netware ..\pod\perlnetware.pod
1443 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1444 copy ..\README.os2 ..\pod\perlos2.pod
1445 copy ..\README.os390 ..\pod\perlos390.pod
1446 copy ..\README.os400 ..\pod\perlos400.pod
1447 copy ..\README.plan9 ..\pod\perlplan9.pod
1448 copy ..\README.qnx ..\pod\perlqnx.pod
1449 copy ..\README.riscos ..\pod\perlriscos.pod
1450 copy ..\README.solaris ..\pod\perlsolaris.pod
1451 copy ..\README.symbian ..\pod\perlsymbian.pod
1452 copy ..\README.tru64 ..\pod\perltru64.pod
1453 copy ..\README.tw ..\pod\perltw.pod
1454 copy ..\README.uts ..\pod\perluts.pod
1455 copy ..\README.vmesa ..\pod\perlvmesa.pod
1456 copy ..\README.vos ..\pod\perlvos.pod
1457 copy ..\README.win32 ..\pod\perlwin32.pod
1458 copy ..\pod\perl5110delta.pod ..\pod\perldelta.pod
1459 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1460 cd ..\lib && $(PERLEXE) lib_pm.PL
1461 $(PERLEXE) $(PL2BAT) $(UTILS)
1462 $(PERLEXE) ..\autodoc.pl ..
1463 $(PERLEXE) ..\pod\perlmodlib.pl -q
1464 $(PERLEXE) ..\pod\buildtoc --build-toc -q
1466 # Note that the pod cleanup in this next section is parsed (and regenerated
1467 # by pod/buildtoc so please check that script before making changes here
1469 distclean: realclean
1470 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1471 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
1472 $(PERLEXESTATIC) $(PERLSTATICLIB)
1474 -del /f $(DYNALOADER).c
1475 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1476 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1477 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1478 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1479 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1480 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1481 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1482 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1483 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1484 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1485 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1486 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1487 -del /f $(LIBDIR)\Devel\PPPort.pm
1488 -del /f $(LIBDIR)\File\Glob.pm
1489 -del /f $(LIBDIR)\Storable.pm
1490 -del /f $(LIBDIR)\Digest\MD5.pm
1491 -del /f $(LIBDIR)\Digest\SHA.pm
1492 -del /f $(LIBDIR)\PerlIO\encoding.pm
1493 -del /f $(LIBDIR)\PerlIO\scalar.pm
1494 -del /f $(LIBDIR)\PerlIO\via.pm
1495 -del /f $(LIBDIR)\Sys\Hostname.pm
1496 -del /f $(LIBDIR)\threads\shared.pm
1497 -del /f $(LIBDIR)\Time\HiRes.pm
1498 -del /f $(LIBDIR)\Unicode\Normalize.pm
1499 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1500 -del /f $(LIBDIR)\Win32.pm
1501 -del /f $(LIBDIR)\Win32CORE.pm
1502 -del /f $(LIBDIR)\Win32API\File.pm
1503 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1504 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1505 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1506 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1507 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1508 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1509 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1510 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1511 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1512 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1513 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1514 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1515 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1516 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1517 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1518 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1519 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1520 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1521 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1522 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1523 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1524 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1525 -cd $(PODDIR) && del /f *.html *.bat podchecker \
1526 perlaix.pod perlamiga.pod perlapi.pod perlapollo.pod \
1527 perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
1528 perlcygwin.pod perldelta.pod perldgux.pod perldos.pod \
1529 perlepoc.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1530 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1531 perllinux.pod perlmachten.pod perlmacos.pod perlmacosx.pod \
1532 perlmint.pod perlmodlib.pod perlmpeix.pod perlnetware.pod \
1533 perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
1534 perlplan9.pod perlqnx.pod perlriscos.pod perlsolaris.pod \
1535 perlsymbian.pod perltoc.pod perltru64.pod perltw.pod \
1536 perluts.pod perlvmesa.pod perlvos.pod perlwin32.pod \
1537 pod2html pod2latex pod2man pod2text pod2usage \
1539 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1540 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1541 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1542 -cd ..\x2p && del /f find2perl s2p psed *.bat
1543 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1546 -del /f ..\lib\Config_git.pl
1549 -del /f $(PERLEXE_ICO) perl.base
1550 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1551 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1552 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1553 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1554 -if exist pod2htmd.tmp del pod2htmd.tmp
1555 -if exist pod2htmi.tmp del pod2htmi.tmp
1556 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1557 -del /f ..\t\test_state
1559 install : all installbare installhtml
1561 installbare : $(RIGHTMAKE) utils
1562 $(PERLEXE) ..\installperl
1563 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1564 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1565 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1566 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1567 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1568 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1571 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1573 inst_lib : $(CONFIGPM)
1574 copy splittree.pl ..
1575 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1576 $(RCOPY) ..\lib $(INST_LIB)\*.*
1578 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1579 cd ..\lib\unicore && \
1580 ..\$(MINIPERL) -I.. mktables
1582 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1583 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1584 if exist ..\t\perl.exe del /f ..\t\perl.exe
1585 rename ..\t\miniperl.exe perl.exe
1586 .IF "$(CCTYPE)" == "BORLAND"
1587 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1589 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1593 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1596 $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
1598 cleanup_unpacked_files:
1599 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
1601 test-prep : all utils unpack_files
1602 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1603 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1604 .IF "$(CCTYPE)" == "BORLAND"
1605 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1607 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1610 test : $(RIGHTMAKE) test-prep
1611 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1613 test-reonly : reonly utils
1614 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1615 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1616 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1618 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA) && \
1622 cd .. && regen.pl && cd win32
1624 test-notty : test-prep
1625 set PERL_SKIP_TTY_TEST=1 && \
1626 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1628 _test : $(RIGHTMAKE)
1629 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1630 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1631 .IF "$(CCTYPE)" == "BORLAND"
1632 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1634 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1636 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1639 -@erase miniperlmain$(o)
1641 -@erase perlglob$(o)
1642 -@erase perlmain$(o)
1643 -@erase perlmainst$(o)
1646 -@erase /f ..\git_version.h
1650 -@erase $(PERLEXESTATIC)
1651 -@erase $(PERLSTATICLIB)
1654 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
1655 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1656 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1657 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1658 -@erase $(UNIDATAFILES)
1659 -@erase $(WIN32_OBJ)
1662 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1663 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1664 -@erase ..\x2p\*.exe ..\x2p\*.bat
1668 -@erase Extensions_static
1672 _preclean : cleanup_unpacked_files
1674 clean : _preclean Extensions_clean _clean
1676 realclean : _preclean Extensions_realclean MakePPPort_clean _clean
1678 # Handy way to run perlbug -ok without having to install and run the
1679 # installed perlbug. We don't re-run the tests here - we trust the user.
1680 # Please *don't* use this unless all tests pass.
1681 # If you want to report test failures, use "dmake nok" instead.
1683 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1686 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1689 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1692 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok