2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 thro 6.0
6 # Mingw32 with gcc-2.95.2 or better **experimental**
8 # This is set up to build a perl.exe that runs off a shared library
9 # (perl57.dll). Also makes individual DLLs for the XS extensions.
13 ## Make sure you read README.win32 *before* you mess with anything here!
17 ## Build configuration. Edit the values below to suit your needs.
21 # Set these to wherever you want "dmake install" to put your
25 INST_TOP *= $(INST_DRV)\perl
28 # Comment this out if you DON'T want your perl installation to be versioned.
29 # This means that the new installation will overwrite any files from the
30 # old installation at the same INST_TOP location. Leaving it enabled is
31 # the safest route, as perl adds the extra version directory to all the
32 # locations it installs files to. If you disable it, an alternative
33 # versioned installation can be obtained by setting INST_TOP above to a
34 # path that includes an arbitrary version string.
39 # Comment this out if you DON'T want your perl installation to have
40 # architecture specific components. This means that architecture-
41 # specific files will be installed along with the architecture-neutral
42 # files. Leaving it enabled is safer and more flexible, in case you
43 # want to build multiple flavors of perl and install them together in
44 # the same location. Commenting it out gives you a simpler
45 # installation that is easier to understand for beginners.
47 INST_ARCH *= \$(ARCHNAME)
50 # uncomment to enable multiple interpreters. This is need for fork()
56 # Beginnings of interpreter cloning/threads; still very incomplete.
57 # This should be enabled to get the fork() emulation. This needs
60 USE_ITHREADS *= define
63 # uncomment to enable the implicit "host" layer for all system calls
64 # made by perl. This needs USE_MULTI above. This is also needed to
70 # uncomment to enable the experimental PerlIO I/O subsystem.
74 # WARNING! This option is deprecated and will eventually go away (enable
75 # USE_ITHREADS instead).
77 # uncomment to enable threads-capabilities. This is incompatible with
78 # USE_ITHREADS, and is only here for people who may have come to rely
79 # on the experimental Thread support that was in 5.005.
81 #USE_5005THREADS *= define
84 # WARNING! This option is deprecated and will eventually go away (enable
87 # uncomment next line if you want to use the PERL_OBJECT build option.
88 # DO NOT ENABLE unless you have legacy code that relies on the C++
89 # CPerlObj class that was available in 5.005. This cannot be enabled
90 # if you ask for USE_5005THREADS above.
95 # uncomment exactly one of the following
99 # Visual C++ > 2.x and < 6.x
103 # Borland 5.02 or later
105 # mingw32+gcc-2.95.2 or better
109 # uncomment this if your Borland compiler is older than v5.4.
112 # uncomment this if you want to use Borland's VCL as your CRT
116 # uncomment this if you are compiling under Windows 95/98 and command.com
117 # (not needed if you're running under 4DOS/NT 6.01 or later)
121 # uncomment next line if you want debug version of perl (big,slow)
122 # If not enabled, we automatically try to use maximum optimization
123 # with all compilers that are known to have a working optimizer.
128 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
129 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
130 # This currently requires VC 5.0 with Service Pack 3 or later.
131 # Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
132 # and follow the directions in the package to install.
134 # Not recommended if you have VC 6.x and you're not running Windows 9x.
136 #USE_PERLCRT *= define
139 # uncomment to enable linking with setargv.obj under the Visual C
140 # compiler. Setting this options enables perl to expand wildcards in
141 # arguments, but it may be harder to use alternate methods like
142 # File::DosGlob that are more powerful. This option is supported only with
145 #USE_SETARGV *= define
148 # if you have the source for des_fcrypt(), uncomment this and make sure the
149 # file exists (see README.win32). File should be located in the same
150 # directory as this file.
152 #CRYPT_SRC *= fcrypt.c
155 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
156 # library, uncomment this, and make sure the library exists (see README.win32)
157 # Specify the full pathname of the library.
159 #CRYPT_LIB *= fcrypt.lib
162 # set this if you wish to use perl's malloc
163 # WARNING: Turning this on/off WILL break binary compatibility with extensions
164 # you may have compiled with/without it. Be prepared to recompile all
165 # extensions if you change the default. Currently, this cannot be enabled
166 # if you ask for USE_IMP_SYS above.
168 #PERL_MALLOC *= define
171 # set the install locations of the compiler include/libraries
172 # Running VCVARS32.BAT is *required* when using Visual C.
173 # Some versions of Visual C don't define MSVCDIR in the environment,
174 # so you may have to set CCHOME explicitly (spaces in the path name should
177 #CCHOME *= F:\borland\bc5
179 #CCHOME *= c:\gcc-2.95.2
180 CCINCDIR *= $(CCHOME)\include
181 CCLIBDIR *= $(CCHOME)\lib
184 # Additional compiler flags can be specified here.
188 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
189 # for old symbols by default, at the expense of extreme pollution. You most
190 # probably just want to build modules that won't compile with
191 # perl Makefile.PL POLLUTE=1
192 # instead of enabling this. Please report such modules to the respective
195 #BUILDOPT += -DPERL_POLLUTE
198 # This should normally be disabled. Enabling it will disable the File::Glob
199 # implementation of CORE::glob.
201 #BUILDOPT += -DPERL_EXTERNAL_GLOB
204 # This should normally be disabled. Enabling it causes perl to read scripts
205 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
206 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
209 # specify semicolon-separated list of extra directories that modules will
210 # look for libraries (spaces in path names need not be quoted)
215 # set this to point to cmd.exe (only needed if you use some
216 # alternate shell that doesn't grok cmd.exe style commands)
218 #SHELL *= g:\winnt\system32\cmd.exe
221 # set this to your email address (perl will guess a value from
222 # from your loginname and your hostname, which may not be right)
227 ## Build configuration ends.
230 ##################### CHANGE THESE ONLY IF YOU MUST #####################
232 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
236 CRYPT_FLAG = -DHAVE_DES_FCRYPT
239 .IF "$(USE_OBJECT)" == "define"
241 USE_5005THREADS != undef
243 USE_IMP_SYS != define
248 USE_5005THREADS *= undef
250 .IF "$(USE_5005THREADS)" == "define"
251 USE_ITHREADS != undef
254 .IF "$(USE_IMP_SYS)" == "define"
260 USE_ITHREADS *= undef
265 .IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
269 .IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
271 USE_5005THREADS != undef
274 .IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
275 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
278 .IF "$(USE_IMP_SYS)" != "undef"
279 BUILDOPT += -DPERL_IMPLICIT_SYS
282 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
284 PROCESSOR_ARCHITECTURE *= x86
286 .IF "$(USE_OBJECT)" == "define"
287 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
288 .ELIF "$(USE_5005THREADS)" == "define"
289 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
290 .ELIF "$(USE_MULTI)" == "define"
291 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
293 .IF "$(USE_PERLIO)" == "define"
294 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
296 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
298 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
301 .IF "$(USE_ITHREADS)" == "define"
302 ARCHNAME !:= $(ARCHNAME)-thread
305 # Visual Studio 98 specific
306 .IF "$(CCTYPE)" == "MSVC60"
308 # VC 6.0 can load the socket dll on demand. Makes the test suite
309 # run in about 10% less time.
310 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
312 .IF "$(CFG)" == "Debug"
314 # VC 6.0 seems capable of compiling perl correctly with optimizations
315 # enabled. Anything earlier fails tests.
320 ARCHDIR = ..\lib\$(ARCHNAME)
321 COREDIR = ..\lib\CORE
322 AUTODIR = ..\lib\auto
326 EXTUTILSDIR = $(LIBDIR)\ExtUtils
329 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
330 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
331 INST_LIB = $(INST_TOP)$(INST_VER)\lib
332 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
333 INST_COREDIR = $(INST_ARCHLIB)\CORE
334 INST_POD = $(INST_LIB)\pod
335 INST_HTML = $(INST_TOP)$(INST_VER)\html
338 # Programs to compile, build .lib files and link
343 .IF "$(CCTYPE)" == "BORLAND"
346 .IF "$(BCCOLD)" != "define"
358 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
359 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
360 DEFINES = -DWIN32 -D_MT $(CRYPT_FLAG)
361 LOCDEFS = -DPERLDLL -DPERL_CORE
366 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
368 .IF "$(CFG)" == "Debug"
369 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
372 OPTIMIZE = -O2 -D_RTLDLL
376 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
377 $(PCHFLAGS) $(OPTIMIZE)
378 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
382 .IF "$(BCCOLD)" != "define"
385 .IF "$(BCCVCL)" == "define"
386 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
387 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
391 .ELIF "$(CCTYPE)" == "GCC"
407 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
408 DEFINES = -DWIN32 $(CRYPT_FLAG)
409 LOCDEFS = -DPERLDLL -DPERL_CORE
416 LIBFILES = $(CRYPT_LIB) $(LIBC) \
417 -lmoldname -lkernel32 -luser32 -lgdi32 \
418 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
419 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
420 -lwinmm -lversion -lodbc32
422 .IF "$(CFG)" == "Debug"
423 OPTIMIZE = -g -O2 -DDEBUGGING
430 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
431 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
436 # NOTE: we assume that GCC uses MSVCRT.DLL
437 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
443 LIB32 = $(LINK32) -lib
450 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
451 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
452 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
453 LOCDEFS = -DPERLDLL -DPERL_CORE
457 .IF "$(USE_PERLCRT)" != "define"
466 .IF "$(CFG)" == "Debug"
467 .IF "$(CCTYPE)" == "MSVC20"
468 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
469 LINK_DBG = -debug -pdb:none
471 # -Zi requires .pdb file(s)
472 #OPTIMIZE = -Od -MD -Zi -DDEBUGGING
474 OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING
475 LINK_DBG = -debug -debugtype:both -pdb:none
478 .IF "$(CFG)" == "Optimize"
479 # -O1 yields smaller code, which turns out to be faster than -O2
480 #OPTIMIZE = -O2 -MD -DNDEBUG
481 OPTIMIZE = -O1 -MD -DNDEBUG
483 OPTIMIZE = -Od -MD -DNDEBUG
488 LIBBASEFILES = $(CRYPT_LIB) \
489 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
490 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
491 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
492 version.lib odbc32.lib odbccp32.lib
494 # we add LIBC here, since we may be using PerlCRT.dll
495 LIBFILES = $(LIBBASEFILES) $(LIBC)
497 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
498 $(PCHFLAGS) $(OPTIMIZE)
499 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
500 -libpath:"$(INST_COREDIR)" \
501 -machine:$(PROCESSOR_ARCHITECTURE)
506 .IF "$(USE_PERLCRT)" != "define"
507 BUILDOPT += -DPERL_MSVCRT_READFIX
512 .IF "$(USE_OBJECT)" == "define"
513 OPTIMIZE += $(CXX_FLAG)
514 BUILDOPT += -DPERL_OBJECT
517 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
519 # used to allow local linking flags that are not propogated into Config.pm,
523 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
525 #################### do not edit below this line #######################
526 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
538 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
541 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
544 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
550 .IF "$(CCTYPE)" == "BORLAND"
551 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
552 $(IMPLIB) $(*B).lib $@
553 .ELIF "$(CCTYPE)" == "GCC"
554 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
555 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
557 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
558 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
566 MINIPERL = ..\miniperl.exe
568 PERLEXE = ..\perl.exe
569 WPERLEXE = ..\wperl.exe
570 GLOBEXE = ..\perlglob.exe
571 CONFIGPM = ..\lib\Config.pm
572 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
575 # Nominate a target which causes extensions to be re-built
576 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
577 # on and really only the interface - i.e. the .def file used to export symbols
579 PERLDEP = perldll.def
582 PL2BAT = bin\pl2bat.pl
583 GLOBBAT = bin\perlglob.bat
611 .IF "$(CCTYPE)" == "BORLAND"
613 CFGSH_TMPL = config.bc
614 CFGH_TMPL = config_H.bc
616 .ELIF "$(CCTYPE)" == "GCC"
618 CFGSH_TMPL = config.gc
619 CFGH_TMPL = config_H.gc
620 PERLIMPLIB = ..\libperl57$(a)
624 CFGSH_TMPL = config.vc
625 CFGH_TMPL = config_H.vc
629 # makedef.pl must be updated if this changes, and this should normally
630 # only change when there is an incompatible revision of the public API.
631 # XXX so why did we change it from perl56 to perl57?
632 PERLIMPLIB *= ..\perl57$(a)
633 PERLDLL = ..\perl57.dll
635 XCOPY = xcopy /f /r /i /d
636 RCOPY = xcopy /f /r /i /e /d
640 # filenames given to xsubpp must have forward slashes (since it puts
641 # full pathnames in #line strings)
642 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
675 EXTRACORE_SRC += perllib.c
677 .IF "$(PERL_MALLOC)" == "define"
678 EXTRACORE_SRC += ..\malloc.c
681 .IF "$(USE_OBJECT)" != "define"
682 EXTRACORE_SRC += ..\perlio.c
690 .IF "$(CRYPT_SRC)" != ""
691 WIN32_SRC += .\$(CRYPT_SRC)
694 DLL_SRC = $(DYNALOADER).c
740 .\include\sys\socket.h \
743 CORE_H = $(CORE_NOCFG_H) .\config.h
745 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
746 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
747 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
748 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
749 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
750 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
751 DLL_OBJ = $(DLL_SRC:db:+$(o))
752 X2P_OBJ = $(X2P_SRC:db:+$(o))
754 PERLDLL_OBJ = $(CORE_OBJ)
755 PERLEXE_OBJ = perlmain$(o)
757 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
759 .IF "$(USE_SETARGV)" != ""
760 SETARGV_OBJ = setargv$(o)
763 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
764 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
765 Sys/Hostname Storable Filter/Util/Call Encode \
766 Digest/MD5 PerlIO/Scalar MIME/Base64
767 STATIC_EXT = DynaLoader
770 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
772 POD2HTML = $(PODDIR)\pod2html
773 POD2MAN = $(PODDIR)\pod2man
774 POD2LATEX = $(PODDIR)\pod2latex
775 POD2TEXT = $(PODDIR)\pod2text
777 # vars must be separated by "\t+~\t+", since we're using the tempfile
778 # version of config_sh.pl (we were overflowing someone's buffer by
779 # trying to fit them all on the command line)
782 INST_DRV=$(INST_DRV) ~ \
783 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
784 INST_VER=$(INST_VER:s/\/\\/) ~ \
785 INST_ARCH=$(INST_ARCH) ~ \
786 archname=$(ARCHNAME) ~ \
789 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
790 cf_email=$(EMAIL) ~ \
791 d_crypt=$(D_CRYPT) ~ \
792 d_mymalloc=$(PERL_MALLOC) ~ \
793 libs=$(LIBFILES:f) ~ \
794 incpath=$(CCINCDIR:s/\/\\/) ~ \
795 libperl=$(PERLIMPLIB:f) ~ \
796 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
799 _o=$(o) obj_ext=$(o) ~ \
800 _a=$(a) lib_ext=$(a) ~ \
801 static_ext=$(STATIC_EXT) ~ \
802 dynamic_ext=$(DYNAMIC_EXT) ~ \
803 nonxs_ext=$(NONXS_EXT) ~ \
804 use5005threads=$(USE_5005THREADS) ~ \
805 useithreads=$(USE_ITHREADS) ~ \
806 usethreads=$(USE_5005THREADS) ~ \
807 usemultiplicity=$(USE_MULTI) ~ \
808 useperlio=$(USE_PERLIO) ~ \
809 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
813 # set up targets varying between Win95 and WinNT builds
816 .IF "$(IS_WIN95)" == "define"
818 RIGHTMAKE = __switch_makefiles
829 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
830 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
833 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
835 #----------------------------------------------------------------
837 #-------------------- BEGIN Win95 SPECIFIC ----------------------
839 # this target is a jump-off point for Win95
840 # 1. it switches to the Win95-specific makefile if it exists
841 # (__do_switch_makefiles)
842 # 2. it prints a message when the Win95-specific one finishes (__done)
843 # 3. it then kills this makefile by trying to make __no_such_target
845 __switch_makefiles: __do_switch_makefiles __done __no_such_target
847 __do_switch_makefiles:
848 .IF "$(NOTFIRST)" != "true"
849 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
854 .IF "$(NOTFIRST)" != "true"
856 @echo Build process complete. Ignore any errors after this message.
857 @echo Run "dmake test" to test and "dmake install" to install
860 # dummy targets for Win95-specific makefile
870 # This target is used to generate the new makefile (.\makefile.95) for Win95
872 .\makefile.95: .\makefile.mk
873 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
875 #--------------------- END Win95 SPECIFIC ---------------------
877 # a blank target for when builds don't need to do certain things
878 # this target added for Win95 port but used to keep the WinNT port able to
883 $(GLOBEXE) : perlglob$(o)
884 .IF "$(CCTYPE)" == "BORLAND"
885 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
886 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
887 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
888 .ELIF "$(CCTYPE)" == "GCC"
889 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
891 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
892 perlglob$(o) setargv$(o)
895 perlglob$(o) : perlglob.c
897 config.w32 : $(CFGSH_TMPL)
898 copy $(CFGSH_TMPL) config.w32
900 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
902 copy $(CFGH_TMPL) config.h
904 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
905 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
906 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
908 # this target is for when changes to the main config.sh happen
909 # edit config.{b,v,g}c and make this target once for each supported
910 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
912 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
913 $(CFGSH_TMPL) > ..\config.sh
914 -cd .. && del /f perl.exe
915 cd .. && perl configpm
918 -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
919 rename config.h $(CFGH_TMPL)
921 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
922 cd .. && miniperl configpm
923 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
924 $(XCOPY) ..\*.h $(COREDIR)\*.*
925 $(XCOPY) *.h $(COREDIR)\*.*
926 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
927 $(RCOPY) include $(COREDIR)\*.*
928 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
929 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
931 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
932 .IF "$(CCTYPE)" == "BORLAND"
933 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
934 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
935 .ELIF "$(CCTYPE)" == "GCC"
936 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
937 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
939 $(LINK32) -subsystem:console -out:$@ \
940 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
944 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
946 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
947 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
949 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
950 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
952 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
953 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
954 # unless the .IF is true), so instead we use a .ELSE with the default.
955 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
957 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
958 .IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
959 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
961 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
964 # 1. we don't want to rebuild miniperl.exe when config.h changes
965 # 2. we don't want to rebuild miniperl.exe with non-default config.h
966 $(MINI_OBJ) : $(CORE_NOCFG_H)
968 $(WIN32_OBJ) : $(CORE_H)
969 $(CORE_OBJ) : $(CORE_H)
970 $(DLL_OBJ) : $(CORE_H)
971 $(X2P_OBJ) : $(CORE_H)
973 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
974 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
975 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
977 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
978 .IF "$(CCTYPE)" == "BORLAND"
979 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
980 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
985 .ELIF "$(CCTYPE)" == "GCC"
986 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
987 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
988 dlltool --output-lib $(PERLIMPLIB) \
989 --dllname $(PERLDLL:b).dll \
991 --base-file perl.base \
992 --output-exp perl.exp
993 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
994 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
997 $(LINK32) -dll -def:perldll.def -out:$@ \
998 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
999 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1001 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1003 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1004 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1006 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1007 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1009 ..\x2p\hash$(o) : ..\x2p\hash.c
1010 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1012 ..\x2p\str$(o) : ..\x2p\str.c
1013 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1015 ..\x2p\util$(o) : ..\x2p\util.c
1016 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1018 ..\x2p\walk$(o) : ..\x2p\walk.c
1019 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1021 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1022 $(MINIPERL) ..\x2p\find2perl.PL
1023 $(MINIPERL) ..\x2p\s2p.PL
1024 .IF "$(CCTYPE)" == "BORLAND"
1025 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1026 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1027 .ELIF "$(CCTYPE)" == "GCC"
1028 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1029 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1031 $(LINK32) -subsystem:console -out:$@ \
1032 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1035 perlmain.c : runperl.c
1036 copy runperl.c perlmain.c
1038 perlmain$(o) : perlmain.c
1039 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1041 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1042 .IF "$(CCTYPE)" == "BORLAND"
1043 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1044 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1046 $(PERLIMPLIB) $(LIBFILES)\n)
1047 .ELIF "$(CCTYPE)" == "GCC"
1048 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1049 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1051 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1052 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1054 copy $(PERLEXE) $(WPERLEXE)
1055 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1056 copy splittree.pl ..
1057 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1059 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1060 if not exist $(AUTODIR) mkdir $(AUTODIR)
1061 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1062 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1063 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1064 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1065 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1066 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1068 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1069 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1071 #----------------------------------------------------------------------------------
1072 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1073 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1075 #----------------------------------------------------------------------------------
1079 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1080 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1081 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1083 utils: $(PERLEXE) $(X2P)
1084 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1085 copy ..\README.aix ..\pod\perlaix.pod
1086 copy ..\README.amiga ..\pod\perlamiga.pod
1087 copy ..\README.cygwin ..\pod\perlcygwin.pod
1088 copy ..\README.dos ..\pod\perldos.pod
1089 copy ..\README.epoc ..\pod\perlepoc.pod
1090 copy ..\README.hpux ..\pod\perlhpux.pod
1091 copy ..\README.machten ..\pod\perlmachten.pod
1092 copy ..\README.os2 ..\pod\perlos2.pod
1093 copy ..\README.os390 ..\pod\perlos390.pod
1094 copy ..\README.vmesa ..\pod\perlvmesa.pod
1095 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1096 copy ..\README.solaris ..\pod\perlsolaris.pod
1097 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1098 copy ..\README.vos ..\pod\perlvos.pod
1099 copy ..\README.win32 ..\pod\perlwin32.pod
1100 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1101 cd ..\lib && $(PERLEXE) lib_pm.PL
1102 $(PERLEXE) $(PL2BAT) $(UTILS)
1105 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1106 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1108 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1109 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1110 -del /f $(LIBDIR)\XSLoader.pm
1111 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1112 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
1113 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1114 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1115 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1116 -del /f $(LIBDIR)\PerlIO\Scalar.pm
1117 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1118 -del /f $(LIBDIR)\File\Glob.pm
1119 -del /f $(LIBDIR)\Storable.pm
1120 -del /f $(LIBDIR)\Filter\Util\Call\Call.pm
1121 -del /f $(LIBDIR)\Digest\MD5.pm
1122 -del /f $(LIBDIR)\MIME\Base64\Base64.pm
1123 -del /f $(LIBDIR)\MIME\Base64\QuotedPrint.pm
1124 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
1125 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
1126 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
1127 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
1128 -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
1129 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
1130 -if exist $(LIBDIR)\Digest\MD5 rmdir /s /q $(LIBDIR)\Digest\MD5 || rmdir /s $(LIBDIR)\Digest\MD5
1131 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
1132 -if exist $(LIBDIR)\MIME\Base64 rmdir /s /q $(LIBDIR)\MIME\Base64 || rmdir /s $(LIBDIR)\MIME\Base64
1133 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
1134 -del /f $(PODDIR)\*.html
1135 -del /f $(PODDIR)\*.bat
1136 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
1138 -cd ..\x2p && del /f find2perl s2p *.bat
1139 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1142 -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
1144 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
1145 -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
1147 install : all installbare installhtml
1149 installbare : $(RIGHTMAKE) utils
1150 $(PERLEXE) ..\installperl
1151 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1152 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1153 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1156 $(RCOPY) html\*.* $(INST_HTML)\*.*
1158 inst_lib : $(CONFIGPM)
1159 copy splittree.pl ..
1160 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1161 $(RCOPY) ..\lib $(INST_LIB)\*.*
1163 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1164 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1165 .IF "$(CCTYPE)" == "BORLAND"
1166 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1168 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1173 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1175 test-prep : all utils
1176 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1177 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1178 .IF "$(CCTYPE)" == "BORLAND"
1179 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1181 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1184 test : $(RIGHTMAKE) test-prep
1185 cd ..\t && $(PERLEXE) -I..\lib harness
1187 test-notty : test-prep
1188 set PERL_SKIP_TTY_TEST=1 && \
1189 cd ..\t && $(PERLEXE) -I.\lib harness
1191 test-wide : test-prep
1192 set HARNESS_PERL_SWITCHES=-C && \
1193 cd ..\t && $(PERLEXE) -I..\lib harness
1195 test-wide-notty : test-prep
1196 set PERL_SKIP_TTY_TEST=1 && \
1197 set HARNESS_PERL_SWITCHES=-C && \
1198 cd ..\t && $(PERLEXE) -I..\lib harness
1201 -@erase miniperlmain$(o)
1203 -@erase perlglob$(o)
1204 -@erase perlmain$(o)
1212 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
1213 -@erase $(WIN32_OBJ)
1216 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1217 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1218 -@erase ..\x2p\*.exe ..\x2p\*.bat
1222 # Handy way to run perlbug -ok without having to install and run the
1223 # installed perlbug. We don't re-run the tests here - we trust the user.
1224 # Please *don't* use this unless all tests pass.
1225 # If you want to report test failures, use "dmake nok" instead.
1227 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1230 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1233 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1236 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok