2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl58.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
57 # Beginnings of interpreter cloning/threads; still very incomplete.
58 # This should be enabled to get the fork() emulation. This needs
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above. This is also needed to
71 # uncomment to enable the experimental PerlIO I/O subsystem.
75 # WARNING! This option is deprecated and will eventually go away (enable
76 # USE_ITHREADS instead).
78 # uncomment to enable threads-capabilities. This is incompatible with
79 # USE_ITHREADS, and is only here for people who may have come to rely
80 # on the experimental Thread support that was in 5.005.
82 #USE_5005THREADS *= define
85 # uncomment exactly one of the following
89 # Visual C++ > 2.x and < 6.x
93 # Borland 5.02 or later
95 # mingw32+gcc-2.95.2 or better
99 # uncomment this if your Borland compiler is older than v5.4.
102 # uncomment this if you want to use Borland's VCL as your CRT
106 # uncomment this if you are compiling under Windows 95/98 and command.com
107 # (not needed if you're running under 4DOS/NT 6.01 or later)
111 # uncomment next line if you want debug version of perl (big,slow)
112 # If not enabled, we automatically try to use maximum optimization
113 # with all compilers that are known to have a working optimizer.
118 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
119 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
120 # This currently requires VC 5.0 with Service Pack 3 or later.
121 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
122 # and follow the directions in the package to install.
124 # Not recommended if you have VC 6.x and you're not running Windows 9x.
126 #USE_PERLCRT *= define
129 # uncomment to enable linking with setargv.obj under the Visual C
130 # compiler. Setting this options enables perl to expand wildcards in
131 # arguments, but it may be harder to use alternate methods like
132 # File::DosGlob that are more powerful. This option is supported only with
135 #USE_SETARGV *= define
138 # if you have the source for des_fcrypt(), uncomment this and make sure the
139 # file exists (see README.win32). File should be located in the same
140 # directory as this file.
142 #CRYPT_SRC *= fcrypt.c
145 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
146 # library, uncomment this, and make sure the library exists (see README.win32)
147 # Specify the full pathname of the library.
149 #CRYPT_LIB *= fcrypt.lib
152 # set this if you wish to use perl's malloc
153 # WARNING: Turning this on/off WILL break binary compatibility with extensions
154 # you may have compiled with/without it. Be prepared to recompile all
155 # extensions if you change the default. Currently, this cannot be enabled
156 # if you ask for USE_IMP_SYS above.
158 #PERL_MALLOC *= define
161 # set the install locations of the compiler include/libraries
162 # Running VCVARS32.BAT is *required* when using Visual C.
163 # Some versions of Visual C don't define MSVCDIR in the environment,
164 # so you may have to set CCHOME explicitly (spaces in the path name should
167 .IF "$(CCTYPE)" == "BORLAND"
168 CCHOME *= C:\borland\bcc55
169 .ELIF "$(CCTYPE)" == "GCC"
174 CCINCDIR *= $(CCHOME)\include
175 CCLIBDIR *= $(CCHOME)\lib
178 # Additional compiler flags can be specified here.
182 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
183 # for old symbols by default, at the expense of extreme pollution. You most
184 # probably just want to build modules that won't compile with
185 # perl Makefile.PL POLLUTE=1
186 # instead of enabling this. Please report such modules to the respective
189 #BUILDOPT += -DPERL_POLLUTE
192 # This should normally be disabled. Enabling it will disable the File::Glob
193 # implementation of CORE::glob.
195 #BUILDOPT += -DPERL_EXTERNAL_GLOB
198 # This should normally be disabled. Enabling it causes perl to read scripts
199 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
200 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
203 # specify semicolon-separated list of extra directories that modules will
204 # look for libraries (spaces in path names need not be quoted)
209 # set this to point to cmd.exe (only needed if you use some
210 # alternate shell that doesn't grok cmd.exe style commands)
212 #SHELL *= g:\winnt\system32\cmd.exe
215 # set this to your email address (perl will guess a value from
216 # from your loginname and your hostname, which may not be right)
221 ## Build configuration ends.
224 ##################### CHANGE THESE ONLY IF YOU MUST #####################
226 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
230 CRYPT_FLAG = -DHAVE_DES_FCRYPT
235 USE_5005THREADS *= undef
237 .IF "$(USE_5005THREADS)" == "define"
238 USE_ITHREADS != undef
241 .IF "$(USE_IMP_SYS)" == "define"
246 USE_ITHREADS *= undef
251 .IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
255 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
257 USE_5005THREADS != undef
260 .IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
261 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
264 .IF "$(USE_IMP_SYS)" != "undef"
265 BUILDOPT += -DPERL_IMPLICIT_SYS
268 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
270 PROCESSOR_ARCHITECTURE *= x86
273 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
274 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
276 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
283 .IF "$(USE_5005THREADS)" == "define"
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
285 .ELIF "$(USE_MULTI)" == "define"
286 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
288 .IF "$(USE_PERLIO)" == "define"
289 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
291 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
293 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
296 .IF "$(USE_ITHREADS)" == "define"
297 ARCHNAME !:= $(ARCHNAME)-thread
300 # Visual Studio 98 specific
301 .IF "$(CCTYPE)" == "MSVC60"
303 # VC 6.0 can load the socket dll on demand. Makes the test suite
304 # run in about 10% less time.
305 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
307 .IF "$(CFG)" == "Debug"
309 # VC 6.0 seems capable of compiling perl correctly with optimizations
310 # enabled. Anything earlier fails tests.
315 ARCHDIR = ..\lib\$(ARCHNAME)
316 COREDIR = ..\lib\CORE
317 AUTODIR = ..\lib\auto
321 EXTUTILSDIR = $(LIBDIR)\ExtUtils
324 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
325 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
326 INST_LIB = $(INST_TOP)$(INST_VER)\lib
327 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
328 INST_COREDIR = $(INST_ARCHLIB)\CORE
329 INST_POD = $(INST_LIB)\pod
330 INST_HTML = $(INST_TOP)$(INST_VER)\html
333 # Programs to compile, build .lib files and link
338 .IF "$(CCTYPE)" == "BORLAND"
341 .IF "$(BCCOLD)" != "define"
353 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
354 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
355 DEFINES = -DWIN32 $(CRYPT_FLAG)
356 LOCDEFS = -DPERLDLL -DPERL_CORE
361 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
363 .IF "$(CFG)" == "Debug"
364 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
367 OPTIMIZE = -O2 -D_RTLDLL
371 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
372 $(PCHFLAGS) $(OPTIMIZE)
373 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
377 .IF "$(BCCOLD)" != "define"
379 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
381 .IF "$(BCCVCL)" == "define"
382 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
383 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
387 .ELIF "$(CCTYPE)" == "GCC"
403 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
404 DEFINES = -DWIN32 $(CRYPT_FLAG)
405 LOCDEFS = -DPERLDLL -DPERL_CORE
412 LIBFILES = $(CRYPT_LIB) $(LIBC) \
413 -lmoldname -lkernel32 -luser32 -lgdi32 \
414 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
415 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
416 -lwinmm -lversion -lodbc32
418 .IF "$(CFG)" == "Debug"
419 OPTIMIZE = -g -O2 -DDEBUGGING
426 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
427 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
432 # NOTE: we assume that GCC uses MSVCRT.DLL
433 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
439 LIB32 = $(LINK32) -lib
446 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
447 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
448 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
449 LOCDEFS = -DPERLDLL -DPERL_CORE
453 .IF "$(USE_PERLCRT)" != "define"
462 .IF "$(CFG)" == "Debug"
463 .IF "$(CCTYPE)" == "MSVC20"
464 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
466 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
470 OPTIMIZE = -MD -DNDEBUG
472 .IF "$(WIN64)" == "define"
473 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
477 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
483 .IF "$(WIN64)" == "define"
484 DEFINES += -DWIN64 -DCONSERVATIVE
485 OPTIMIZE += -Wp64 -Op
488 .IF "$(USE_PERLCRT)" != "define"
489 BUILDOPT += -DPERL_MSVCRT_READFIX
492 LIBBASEFILES = $(CRYPT_LIB) \
493 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
494 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
495 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
498 # win64 doesn't have some libs
499 .IF "$(WIN64)" != "define"
500 LIBBASEFILES += odbc32.lib odbccp32.lib
503 # we add LIBC here, since we may be using PerlCRT.dll
504 LIBFILES = $(LIBBASEFILES) $(LIBC)
506 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
507 $(PCHFLAGS) $(OPTIMIZE)
508 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
509 -libpath:"$(INST_COREDIR)" \
510 -machine:$(PROCESSOR_ARCHITECTURE)
517 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
519 # used to allow local linking flags that are not propogated into Config.pm,
523 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
525 #################### do not edit below this line #######################
526 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
538 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
541 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
544 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
550 .IF "$(CCTYPE)" == "BORLAND"
551 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
552 $(IMPLIB) $(*B).lib $@
553 .ELIF "$(CCTYPE)" == "GCC"
554 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
555 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
557 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
558 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
566 MINIPERL = ..\miniperl.exe
568 PERLEXE = ..\perl.exe
569 WPERLEXE = ..\wperl.exe
570 GLOBEXE = ..\perlglob.exe
571 CONFIGPM = ..\lib\Config.pm
572 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
575 # Nominate a target which causes extensions to be re-built
576 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
577 # on and really only the interface - i.e. the .def file used to export symbols
579 PERLDEP = perldll.def
582 PL2BAT = bin\pl2bat.pl
583 GLOBBAT = bin\perlglob.bat
607 ..\lib\ExtUtils\xsubpp \
614 .IF "$(CCTYPE)" == "BORLAND"
616 CFGSH_TMPL = config.bc
617 CFGH_TMPL = config_H.bc
619 .ELIF "$(CCTYPE)" == "GCC"
621 CFGSH_TMPL = config.gc
622 CFGH_TMPL = config_H.gc
623 PERLIMPLIB = ..\libperl58$(a)
627 .IF "$(WIN64)" == "define"
628 CFGSH_TMPL = config.vc64
629 CFGH_TMPL = config_H.vc64
631 CFGSH_TMPL = config.vc
632 CFGH_TMPL = config_H.vc
637 # makedef.pl must be updated if this changes, and this should normally
638 # only change when there is an incompatible revision of the public API.
639 PERLIMPLIB *= ..\perl58$(a)
640 PERLDLL = ..\perl58.dll
642 XCOPY = xcopy /f /r /i /d
643 RCOPY = xcopy /f /r /i /e /d
647 # filenames given to xsubpp must have forward slashes (since it puts
648 # full pathnames in #line strings)
649 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
687 EXTRACORE_SRC += perllib.c
689 .IF "$(PERL_MALLOC)" == "define"
690 EXTRACORE_SRC += ..\malloc.c
693 EXTRACORE_SRC += ..\perlio.c
700 .IF "$(USE_PERLIO)" == "define"
701 WIN32_SRC += .\win32io.c
704 .IF "$(CRYPT_SRC)" != ""
705 WIN32_SRC += .\$(CRYPT_SRC)
708 DLL_SRC = $(DYNALOADER).c
754 .\include\sys\socket.h \
757 CORE_H = $(CORE_NOCFG_H) .\config.h
759 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
760 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
761 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
762 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
763 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
764 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
765 DLL_OBJ = $(DLL_SRC:db:+$(o))
766 X2P_OBJ = $(X2P_SRC:db:+$(o))
768 PERLDLL_OBJ = $(CORE_OBJ)
769 PERLEXE_OBJ = perlmain$(o)
771 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
773 .IF "$(USE_SETARGV)" != ""
774 SETARGV_OBJ = setargv$(o)
777 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
778 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
779 Sys/Hostname Storable Filter/Util/Call Encode \
780 Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes \
782 STATIC_EXT = DynaLoader
785 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
787 POD2HTML = $(PODDIR)\pod2html
788 POD2MAN = $(PODDIR)\pod2man
789 POD2LATEX = $(PODDIR)\pod2latex
790 POD2TEXT = $(PODDIR)\pod2text
792 # vars must be separated by "\t+~\t+", since we're using the tempfile
793 # version of config_sh.pl (we were overflowing someone's buffer by
794 # trying to fit them all on the command line)
797 INST_DRV=$(INST_DRV) ~ \
798 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
799 INST_VER=$(INST_VER:s/\/\\/) ~ \
800 INST_ARCH=$(INST_ARCH) ~ \
801 archname=$(ARCHNAME) ~ \
804 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
805 cf_email=$(EMAIL) ~ \
806 d_crypt=$(D_CRYPT) ~ \
807 d_mymalloc=$(PERL_MALLOC) ~ \
808 libs=$(LIBFILES:f) ~ \
809 incpath=$(CCINCDIR:s/\/\\/) ~ \
810 libperl=$(PERLIMPLIB:f) ~ \
811 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
818 static_ext=$(STATIC_EXT) ~ \
819 use5005threads=$(USE_5005THREADS) ~ \
820 useithreads=$(USE_ITHREADS) ~ \
821 usethreads=$(USE_5005THREADS) ~ \
822 usemultiplicity=$(USE_MULTI) ~ \
823 useperlio=$(USE_PERLIO) ~ \
824 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
828 # set up targets varying between Win95 and WinNT builds
831 .IF "$(IS_WIN95)" == "define"
833 RIGHTMAKE = __switch_makefiles
844 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
845 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
848 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
850 #----------------------------------------------------------------
852 #-------------------- BEGIN Win95 SPECIFIC ----------------------
854 # this target is a jump-off point for Win95
855 # 1. it switches to the Win95-specific makefile if it exists
856 # (__do_switch_makefiles)
857 # 2. it prints a message when the Win95-specific one finishes (__done)
858 # 3. it then kills this makefile by trying to make __no_such_target
860 __switch_makefiles: __do_switch_makefiles __done __no_such_target
862 __do_switch_makefiles:
863 .IF "$(NOTFIRST)" != "true"
864 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
869 .IF "$(NOTFIRST)" != "true"
871 @echo Build process complete. Ignore any errors after this message.
872 @echo Run "dmake test" to test and "dmake install" to install
875 # dummy targets for Win95-specific makefile
885 # This target is used to generate the new makefile (.\makefile.95) for Win95
887 .\makefile.95: .\makefile.mk
888 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
890 #--------------------- END Win95 SPECIFIC ---------------------
892 # a blank target for when builds don't need to do certain things
893 # this target added for Win95 port but used to keep the WinNT port able to
898 $(GLOBEXE) : perlglob$(o)
899 .IF "$(CCTYPE)" == "BORLAND"
900 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
901 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
902 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
903 .ELIF "$(CCTYPE)" == "GCC"
904 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
906 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
907 perlglob$(o) setargv$(o)
910 perlglob$(o) : perlglob.c
912 config.w32 : $(CFGSH_TMPL)
913 copy $(CFGSH_TMPL) config.w32
915 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
917 copy $(CFGH_TMPL) config.h
919 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
920 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
921 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
923 # this target is for when changes to the main config.sh happen
924 # edit config.{b,v,g}c and make this target once for each supported
925 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
927 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
928 $(CFGSH_TMPL) > ..\config.sh
929 -cd .. && del /f perl.exe
930 -cd .. && del /f perl*.dll
931 cd .. && perl configpm
934 -perl config_h.PL "INST_VER=$(INST_VER)"
935 rename config.h $(CFGH_TMPL)
937 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
938 cd .. && miniperl configpm
939 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
940 $(XCOPY) ..\*.h $(COREDIR)\*.*
941 $(XCOPY) *.h $(COREDIR)\*.*
942 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
943 $(RCOPY) include $(COREDIR)\*.*
944 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
945 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
947 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
948 .IF "$(CCTYPE)" == "BORLAND"
949 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
950 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
951 .ELIF "$(CCTYPE)" == "GCC"
952 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
953 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
955 $(LINK32) -subsystem:console -out:$@ \
956 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
960 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
962 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
963 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
965 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
966 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
968 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
969 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
970 # unless the .IF is true), so instead we use a .ELSE with the default.
971 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
973 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
974 .IF "$(USE_IMP_SYS)" == "define"
975 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
977 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
980 # 1. we don't want to rebuild miniperl.exe when config.h changes
981 # 2. we don't want to rebuild miniperl.exe with non-default config.h
982 $(MINI_OBJ) : $(CORE_NOCFG_H)
984 $(WIN32_OBJ) : $(CORE_H)
985 $(CORE_OBJ) : $(CORE_H)
986 $(DLL_OBJ) : $(CORE_H)
987 $(X2P_OBJ) : $(CORE_H)
989 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
990 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
991 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
993 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
994 .IF "$(CCTYPE)" == "BORLAND"
995 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
996 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1001 .ELIF "$(CCTYPE)" == "GCC"
1002 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1003 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1004 dlltool --output-lib $(PERLIMPLIB) \
1005 --dllname $(PERLDLL:b).dll \
1007 --base-file perl.base \
1008 --output-exp perl.exp
1009 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1010 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1013 $(LINK32) -dll -def:perldll.def -out:$@ \
1014 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1015 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1017 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1019 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1020 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1022 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1023 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1025 ..\x2p\hash$(o) : ..\x2p\hash.c
1026 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1028 ..\x2p\str$(o) : ..\x2p\str.c
1029 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1031 ..\x2p\util$(o) : ..\x2p\util.c
1032 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1034 ..\x2p\walk$(o) : ..\x2p\walk.c
1035 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1037 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1038 $(MINIPERL) ..\x2p\find2perl.PL
1039 $(MINIPERL) ..\x2p\s2p.PL
1040 .IF "$(CCTYPE)" == "BORLAND"
1041 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1042 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1043 .ELIF "$(CCTYPE)" == "GCC"
1044 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1045 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1047 $(LINK32) -subsystem:console -out:$@ \
1048 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1051 perlmain.c : runperl.c
1052 copy runperl.c perlmain.c
1054 perlmain$(o) : perlmain.c
1055 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1057 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1058 .IF "$(CCTYPE)" == "BORLAND"
1059 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1060 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1062 $(PERLIMPLIB) $(LIBFILES)\n)
1063 .ELIF "$(CCTYPE)" == "GCC"
1064 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1065 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1067 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1068 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1070 copy $(PERLEXE) $(WPERLEXE)
1071 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1072 copy splittree.pl ..
1073 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1075 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1076 if not exist $(AUTODIR) mkdir $(AUTODIR)
1077 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1078 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1079 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1080 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1081 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1082 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1084 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1085 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1087 #----------------------------------------------------------------------------------
1088 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1089 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1092 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1094 #----------------------------------------------------------------------------------
1098 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1099 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1100 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1102 utils: $(PERLEXE) $(X2P)
1103 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1104 copy ..\README.aix ..\pod\perlaix.pod
1105 copy ..\README.amiga ..\pod\perlamiga.pod
1106 copy ..\README.apollo ..\pod\perlapollo.pod
1107 copy ..\README.beos ..\pod\perlbeos.pod
1108 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1109 copy ..\README.ce ..\pod\perlce.pod
1110 copy ..\README.cygwin ..\pod\perlcygwin.pod
1111 copy ..\README.dgux ..\pod\perldgux.pod
1112 copy ..\README.dos ..\pod\perldos.pod
1113 copy ..\README.epoc ..\pod\perlepoc.pod
1114 copy ..\README.hpux ..\pod\perlhpux.pod
1115 copy ..\README.hurd ..\pod\perlhurd.pod
1116 copy ..\README.machten ..\pod\perlmachten.pod
1117 copy ..\README.macos ..\pod\perlmacos.pod
1118 copy ..\README.mint ..\pod\perlmint.pod
1119 copy ..\README.mpeix ..\pod\perlmpeix.pod
1120 copy ..\README.netware ..\pod\perlnetware.pod
1121 copy ..\README.os2 ..\pod\perlos2.pod
1122 copy ..\README.os390 ..\pod\perlos390.pod
1123 copy ..\README.plan9 ..\pod\perlplan9.pod
1124 copy ..\README.qnx ..\pod\perlqnx.pod
1125 copy ..\README.solaris ..\pod\perlsolaris.pod
1126 copy ..\README.tru64 ..\pod\perltru64.pod
1127 copy ..\README.uts ..\pod\perluts.pod
1128 copy ..\README.vmesa ..\pod\perlvmesa.pod
1129 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1130 copy ..\README.vos ..\pod\perlvos.pod
1131 copy ..\README.win32 ..\pod\perlwin32.pod
1132 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1133 cd ..\lib && $(PERLEXE) lib_pm.PL
1134 $(PERLEXE) $(PL2BAT) $(UTILS)
1137 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1138 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1140 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1141 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1142 -del /f $(LIBDIR)\XSLoader.pm
1143 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1144 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1145 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1146 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1147 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1148 -del /f $(LIBDIR)\PerlIO\Scalar.pm
1149 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1150 -del /f $(LIBDIR)\File\Glob.pm
1151 -del /f $(LIBDIR)\Storable.pm
1152 -del /f $(LIBDIR)\Filter\Util\Call.pm
1153 -del /f $(LIBDIR)\Digest\MD5.pm
1154 -del /f $(LIBDIR)\MIME\Base64.pm
1155 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1156 -del /f $(LIBDIR)\Time\HiRes.pm
1157 -del /f $(LIBDIR)\List\Util.pm
1158 -del /f $(LIBDIR)\Scalar\Util.pm
1159 -del /f $(LIBDIR)\Unicode\Normalize.pm
1160 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
1161 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
1162 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
1163 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
1164 -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
1165 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
1166 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
1167 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
1168 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
1169 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
1170 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1171 perlaix.pod perlamiga.pod perlapollo.pod \
1172 perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1173 perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \
1174 perlmachten.pod perlmint.pod \
1175 perlmacos.pod perlmpeix.pod perlnetware.pod \
1176 perlos2.pod perlos390.pod \
1177 perlplan9.pod perlqnx.pod \
1178 perlsolaris.pod perltru64.pod perluts.pod \
1179 perlvmesa.pod perlvms.pod perlvos.pod \
1180 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1181 podchecker podselect
1182 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
1183 perlivp dprofpp *.bat
1184 -cd ..\x2p && del /f find2perl s2p *.bat
1185 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1188 -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
1190 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
1191 -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
1193 install : all installbare installhtml
1195 installbare : $(RIGHTMAKE) utils
1196 $(PERLEXE) ..\installperl
1197 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1198 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1199 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1202 $(RCOPY) html\*.* $(INST_HTML)\*.*
1204 inst_lib : $(CONFIGPM)
1205 copy splittree.pl ..
1206 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1207 $(RCOPY) ..\lib $(INST_LIB)\*.*
1209 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1210 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1211 .IF "$(CCTYPE)" == "BORLAND"
1212 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1214 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1219 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1221 test-prep : all utils
1222 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1223 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1224 .IF "$(CCTYPE)" == "BORLAND"
1225 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1227 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1230 test : $(RIGHTMAKE) test-prep
1231 cd ..\t && $(PERLEXE) -I..\lib harness
1233 test-notty : test-prep
1234 set PERL_SKIP_TTY_TEST=1 && \
1235 cd ..\t && $(PERLEXE) -I.\lib harness
1237 test-wide : test-prep
1238 set HARNESS_PERL_SWITCHES=-C && \
1239 cd ..\t && $(PERLEXE) -I..\lib harness
1241 test-wide-notty : test-prep
1242 set PERL_SKIP_TTY_TEST=1 && \
1243 set HARNESS_PERL_SWITCHES=-C && \
1244 cd ..\t && $(PERLEXE) -I..\lib harness
1246 _test : $(RIGHTMAKE)
1247 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1248 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1249 .IF "$(CCTYPE)" == "BORLAND"
1250 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1252 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1254 cd ..\t && $(PERLEXE) -I..\lib harness
1256 clean : Extensions_clean
1257 -@erase miniperlmain$(o)
1259 -@erase perlglob$(o)
1260 -@erase perlmain$(o)
1268 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
1269 -@erase $(WIN32_OBJ)
1272 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1273 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1274 -@erase ..\x2p\*.exe ..\x2p\*.bat
1278 # Handy way to run perlbug -ok without having to install and run the
1279 # installed perlbug. We don't re-run the tests here - we trust the user.
1280 # Please *don't* use this unless all tests pass.
1281 # If you want to report test failures, use "dmake nok" instead.
1283 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1286 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1289 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1292 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok