2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 or later
5 # Borland C++ 5.02 or later
6 # MinGW with gcc-2.95.2 or later
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual C++ 98)
101 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
105 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
106 #CCTYPE *= MSVC80FREE
107 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
110 #CCTYPE *= MSVC90FREE
111 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
113 # Borland 5.02 or later
115 # MinGW with gcc-2.95.2 or later
119 # uncomment this if your Borland compiler is older than v5.4.
122 # uncomment this if you want to use Borland's VCL as your CRT
126 # uncomment this if you are compiling under Windows 95/98 and command.com
127 # (not needed if you're running under 4DOS/NT 6.01 or later)
131 # uncomment next line if you want debug version of perl (big,slow)
132 # If not enabled, we automatically try to use maximum optimization
133 # with all compilers that are known to have a working optimizer.
138 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
139 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
140 # This currently requires VC 5.0 with Service Pack 3 or later.
141 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
142 # and follow the directions in the package to install.
144 # Not recommended if you have VC 6.x and you're not running Windows 9x.
146 #USE_PERLCRT *= define
149 # uncomment to enable linking with setargv.obj under the Visual C
150 # compiler. Setting this options enables perl to expand wildcards in
151 # arguments, but it may be harder to use alternate methods like
152 # File::DosGlob that are more powerful. This option is supported only with
155 #USE_SETARGV *= define
158 # if you want to have the crypt() builtin function implemented, leave this or
159 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
160 # version of des_fcrypt().
162 CRYPT_SRC *= fcrypt.c
165 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
166 # library, uncomment this, and make sure the library exists (see README.win32)
167 # Specify the full pathname of the library.
169 #CRYPT_LIB *= fcrypt.lib
172 # set this if you wish to use perl's malloc
173 # WARNING: Turning this on/off WILL break binary compatibility with extensions
174 # you may have compiled with/without it. Be prepared to recompile all
175 # extensions if you change the default. Currently, this cannot be enabled
176 # if you ask for USE_IMP_SYS above.
178 #PERL_MALLOC *= define
181 # set this to enable debugging mstats
182 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
183 # be enabled without PERL_MALLOC as well.
185 #DEBUG_MSTATS *= define
188 # set this to additionally provide a statically linked perl-static.exe.
189 # Note that dynamic loading will not work with this perl, so you must
190 # include required modules statically using the STATIC_EXT or ALL_STATIC
191 # variables below. A static library perl59s.lib will also be created.
192 # Ordinary perl.exe is not affected by this option.
194 #BUILD_STATIC *= define
197 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
198 # extension get statically built
199 # This will result in a very large perl executable, but the main purpose
200 # is to have proper linking set so as to be able to create miscellaneous
201 # executables with different built-in extensions
203 #ALL_STATIC *= define
206 # set the install locations of the compiler include/libraries
207 # Running VCVARS32.BAT is *required* when using Visual C.
208 # Some versions of Visual C don't define MSVCDIR in the environment,
209 # so you may have to set CCHOME explicitly (spaces in the path name should
212 .IF "$(CCTYPE)" == "BORLAND"
213 CCHOME *= C:\Borland\BCC55
214 .ELIF "$(CCTYPE)" == "GCC"
219 CCINCDIR *= $(CCHOME)\include
220 CCLIBDIR *= $(CCHOME)\lib
223 # Additional compiler flags can be specified here.
225 BUILDOPT *= $(BUILDOPTEXTRA)
228 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
229 # internal hash function unless the PERL_HASH_SEED environment variable is set.
230 # Alternatively, adding -DNO_HASH_SEED will completely disable the
231 # randomization feature.
232 # The latter is required to maintain binary compatibility with Perl 5.8.0.
234 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
235 #BUILDOPT += -DNO_HASH_SEED
238 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
239 # for old symbols by default, at the expense of extreme pollution. You most
240 # probably just want to build modules that won't compile with
241 # perl Makefile.PL POLLUTE=1
242 # instead of enabling this. Please report such modules to the respective
245 #BUILDOPT += -DPERL_POLLUTE
248 # This should normally be disabled. Enabling it will disable the File::Glob
249 # implementation of CORE::glob.
251 #BUILDOPT += -DPERL_EXTERNAL_GLOB
254 # This should normally be disabled. Enabling it causes perl to read scripts
255 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
257 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
260 # specify semicolon-separated list of extra directories that modules will
261 # look for libraries (spaces in path names need not be quoted)
266 # set this to point to cmd.exe (only needed if you use some
267 # alternate shell that doesn't grok cmd.exe style commands)
269 #SHELL *= g:\winnt\system32\cmd.exe
272 # set this to your email address (perl will guess a value from
273 # from your loginname and your hostname, which may not be right)
278 ## Build configuration ends.
281 ##################### CHANGE THESE ONLY IF YOU MUST #####################
283 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
287 CRYPT_FLAG = -DHAVE_DES_FCRYPT
291 DEBUG_MSTATS *= undef
293 USE_SITECUST *= undef
295 USE_ITHREADS *= undef
298 USE_LARGE_FILES *= undef
301 .IF "$(USE_IMP_SYS)" == "define"
305 .IF "$(PERL_MALLOC)" == "undef"
309 .IF "$(DEBUG_MSTATS)" == "define"
310 BUILDOPT += -DPERL_DEBUGGING_MSTATS
313 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
317 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
321 .IF "$(USE_SITECUST)" == "define"
322 BUILDOPT += -DUSE_SITECUSTOMIZE
325 .IF "$(USE_MULTI)" != "undef"
326 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
329 .IF "$(USE_IMP_SYS)" != "undef"
330 BUILDOPT += -DPERL_IMPLICIT_SYS
333 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
335 PROCESSOR_ARCHITECTURE *= x86
338 # When we are running from a 32bit cmd.exe on AMD64 then
339 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
341 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
342 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
344 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
351 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
352 .IF "$(ARCHITECTURE)" == "AMD64"
355 .IF "$(ARCHITECTURE)" == "IA64"
359 .IF "$(USE_MULTI)" == "define"
360 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
362 .IF "$(USE_PERLIO)" == "define"
363 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
365 ARCHNAME = MSWin32-$(ARCHITECTURE)
369 .IF "$(USE_ITHREADS)" == "define"
370 ARCHNAME !:= $(ARCHNAME)-thread
373 # Visual C++ 98, .NET 2003, 2005 and 2008 specific.
374 # VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
375 # in about 10% less time. (The free version of 7.x can't do this, but the free
376 # versions of 8.x and 9.x can.)
377 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
378 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" ||
379 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
380 DELAYLOAD *= -DELAYLOAD:ws2_32.dll delayimp.lib
383 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
384 # DLLs. These either need copying everywhere with the binaries, or else need
385 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. Embed
386 # them for simplicity, and delete them afterwards so that they don't get
388 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
389 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
390 EMBED_EXE_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
392 EMBED_DLL_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
396 ARCHDIR = ..\lib\$(ARCHNAME)
397 COREDIR = ..\lib\CORE
398 AUTODIR = ..\lib\auto
402 EXTUTILSDIR = $(LIBDIR)\ExtUtils
406 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
407 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
408 INST_LIB = $(INST_TOP)$(INST_VER)\lib
409 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
410 INST_COREDIR = $(INST_ARCHLIB)\CORE
411 INST_HTML = $(INST_TOP)$(INST_VER)\html
414 # Programs to compile, build .lib files and link
419 .IF "$(CCTYPE)" == "BORLAND"
422 .IF "$(BCCOLD)" != "define"
427 LIB32 = tlib /a /P128
434 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
435 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
436 DEFINES = -DWIN32 $(CRYPT_FLAG)
437 LOCDEFS = -DPERLDLL -DPERL_CORE
443 # same libs as MSVC, except Borland doesn't have oldnames.lib
444 LIBFILES = $(CRYPT_LIB) \
445 kernel32.lib user32.lib gdi32.lib winspool.lib \
446 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
447 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
448 version.lib odbc32.lib odbccp32.lib \
451 .IF "$(CFG)" == "Debug"
452 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
455 OPTIMIZE = -O2 -D_RTLDLL
460 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
461 $(PCHFLAGS) $(OPTIMIZE)
462 LINK_FLAGS = $(LINK_DBG) -x -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
467 .IF "$(BCCOLD)" != "define"
469 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
471 .IF "$(BCCVCL)" == "define"
472 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
473 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
477 .ELIF "$(CCTYPE)" == "GCC"
493 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
494 DEFINES = -DWIN32 $(CRYPT_FLAG)
495 LOCDEFS = -DPERLDLL -DPERL_CORE
502 LIBFILES = $(CRYPT_LIB) $(LIBC) \
503 -lmoldname -lkernel32 -luser32 -lgdi32 \
504 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
505 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
506 -lwinmm -lversion -lodbc32 -lodbccp32
508 .IF "$(CFG)" == "Debug"
509 OPTIMIZE = -g -O2 -DDEBUGGING
517 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
518 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
523 # NOTE: we assume that GCC uses MSVCRT.DLL
524 # See comments about PERL_MSVCRT_READFIX in the "cl" compiler section below.
525 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
531 LIB32 = $(LINK32) -lib
538 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
539 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
540 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
541 LOCDEFS = -DPERLDLL -DPERL_CORE
545 .IF "$(USE_PERLCRT)" != "define"
551 .IF "$(CFG)" == "Debug"
552 .IF "$(CCTYPE)" == "MSVC20"
553 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
555 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
559 OPTIMIZE = -MD -Zi -DNDEBUG
560 # we enable debug symbols in release builds also
561 LINK_DBG = -debug -opt:ref,icf
562 # you may want to enable this if you want COFF symbols in the executables
563 # in addition to the PDB symbols. The default Dr. Watson that ships with
564 # Windows can use the the former but not latter. The free WinDbg can be
565 # installed to get better stack traces from just the PDB symbols, so we
566 # avoid the bloat of COFF symbols by default.
567 #LINK_DBG = $(LINK_DBG) -debugtype:both
568 .IF "$(WIN64)" == "define"
569 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
573 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
579 .IF "$(WIN64)" == "define"
580 DEFINES += -DWIN64 -DCONSERVATIVE
581 OPTIMIZE += -Wp64 -fp:precise
584 # For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
585 # and POSIX CRT function names being deprecated.
586 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
587 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
588 DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
591 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
592 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
593 # do not require the fix.
594 .IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
595 .IF "$(USE_PERLCRT)" != "define"
596 BUILDOPT += -DPERL_MSVCRT_READFIX
600 LIBBASEFILES = $(CRYPT_LIB) \
601 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
602 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
603 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
604 version.lib odbc32.lib odbccp32.lib
606 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
607 # include the buffer overrun verification code used by the /GS switch.
608 # Since the code links against libraries that are compiled with /GS, this
609 # "security cookie verification" must be included via bufferoverlow.lib.
610 .IF "$(WIN64)" == "define"
611 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
614 # we add LIBC here, since we may be using PerlCRT.dll
615 LIBFILES = $(LIBBASEFILES) $(LIBC)
617 EXTRACFLAGS = -nologo -GF -W3
618 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
619 $(PCHFLAGS) $(OPTIMIZE)
620 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
621 -libpath:"$(INST_COREDIR)" \
622 -machine:$(PROCESSOR_ARCHITECTURE)
630 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
632 # used to allow local linking flags that are not propogated into Config.pm,
636 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
638 #################### do not edit below this line #######################
639 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
641 # Some old dmakes (including Sarathy's one at
642 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip)
643 # don't support logical OR (||) or logical AND (&&) in conditional
644 # expressions and hence don't process this makefile correctly. Determine
645 # whether this is the case so that we can give the user an error message.
662 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
665 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
668 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
674 .IF "$(CCTYPE)" == "BORLAND"
675 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
676 $(IMPLIB) $(*B).lib $@
677 .ELIF "$(CCTYPE)" == "GCC"
678 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
679 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
681 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
682 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
687 .IF "$(CCTYPE)" == "GCC"
688 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -i $< -o $@
695 MINIPERL = ..\miniperl.exe
697 PERLEXE = ..\perl.exe
698 WPERLEXE = ..\wperl.exe
699 PERLEXESTATIC = ..\perl-static.exe
700 GLOBEXE = ..\perlglob.exe
701 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
702 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
704 GENUUDMAP = ..\generate_uudmap.exe
705 .IF "$(BUILD_STATIC)" == "define"
711 # Unicode data files generated by mktables
712 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
713 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
714 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
715 ..\lib\unicore\PVA.pl
717 # Directories of Unicode data files generated by mktables
718 UNIDATADIR1 = ..\lib\unicore\To
719 UNIDATADIR2 = ..\lib\unicore\lib
721 PERLEXE_ICO = .\perlexe.ico
722 PERLEXE_RES = .\perlexe.res
725 # Nominate a target which causes extensions to be re-built
726 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
727 # on and really only the interface - i.e. the .def file used to export symbols
729 PERLDEP = perldll.def
732 PL2BAT = bin\pl2bat.pl
733 GLOBBAT = bin\perlglob.bat
749 ..\utils\config_data \
756 ..\utils\cpanp-run-perl \
778 .IF "$(CCTYPE)" == "BORLAND"
780 CFGSH_TMPL = config.bc
781 CFGH_TMPL = config_H.bc
783 .ELIF "$(CCTYPE)" == "GCC"
785 CFGSH_TMPL = config.gc
786 CFGH_TMPL = config_H.gc
787 PERLIMPLIB = ..\libperl59$(a)
788 PERLSTATICLIB = ..\libperl59s$(a)
792 .IF "$(WIN64)" == "define"
793 CFGSH_TMPL = config.vc64
794 CFGH_TMPL = config_H.vc64
796 CFGSH_TMPL = config.vc
797 CFGH_TMPL = config_H.vc
802 # makedef.pl must be updated if this changes, and this should normally
803 # only change when there is an incompatible revision of the public API.
804 PERLIMPLIB *= ..\perl59$(a)
805 PERLSTATICLIB *= ..\perl59s$(a)
806 PERLDLL = ..\perl59.dll
808 XCOPY = xcopy /f /r /i /d /y
809 RCOPY = xcopy /f /r /i /e /d /y
813 # filenames given to xsubpp must have forward slashes (since it puts
814 # full pathnames in #line strings)
815 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
856 EXTRACORE_SRC += perllib.c
858 .IF "$(PERL_MALLOC)" == "define"
859 EXTRACORE_SRC += ..\malloc.c
862 EXTRACORE_SRC += ..\perlio.c
869 # We need this for miniperl build unless we override canned
870 # config.h #define building mini\*
871 #.IF "$(USE_PERLIO)" == "define"
872 WIN32_SRC += .\win32io.c
875 .IF "$(CRYPT_SRC)" != ""
876 WIN32_SRC += .\$(CRYPT_SRC)
879 DLL_SRC = $(DYNALOADER).c
925 .\include\sys\socket.h \
928 CORE_H = $(CORE_NOCFG_H) .\config.h
930 UUDMAP_H = ..\uudmap.h
932 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
933 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
934 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
935 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
936 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
937 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
938 DLL_OBJ = $(DLL_SRC:db:+$(o))
939 X2P_OBJ = $(X2P_SRC:db:+$(o))
940 GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
942 PERLDLL_OBJ = $(CORE_OBJ)
943 PERLEXE_OBJ = perlmain$(o)
944 PERLEXEST_OBJ = perlmainst$(o)
946 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
948 .IF "$(USE_SETARGV)" != ""
949 SETARGV_OBJ = setargv$(o)
952 .IF "$(ALL_STATIC)" == "define"
953 # some exclusions, unfortunately, until fixed:
954 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
955 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
956 # - Encode (encoding search algorithm relies on shared library?)
957 STATIC_EXT = * !Win32 !SDBM_File !Encode
959 # specify static extensions here, for example:
960 #STATIC_EXT = Cwd Compress/Raw/Zlib
961 STATIC_EXT = Win32CORE
964 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
966 # vars must be separated by "\t+~\t+", since we're using the tempfile
967 # version of config_sh.pl (we were overflowing someone's buffer by
968 # trying to fit them all on the command line)
971 INST_DRV=$(INST_DRV) ~ \
972 INST_TOP=$(INST_TOP) ~ \
973 INST_VER=$(INST_VER) ~ \
974 INST_ARCH=$(INST_ARCH) ~ \
975 archname=$(ARCHNAME) ~ \
978 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
979 cf_email=$(EMAIL) ~ \
980 d_crypt=$(D_CRYPT) ~ \
981 d_mymalloc=$(PERL_MALLOC) ~ \
982 libs=$(LIBFILES:f) ~ \
983 incpath=$(CCINCDIR) ~ \
984 libperl=$(PERLIMPLIB:f) ~ \
985 libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
992 static_ext=$(STATIC_EXT) ~ \
993 usethreads=$(USE_ITHREADS) ~ \
994 useithreads=$(USE_ITHREADS) ~ \
995 usemultiplicity=$(USE_MULTI) ~ \
996 useperlio=$(USE_PERLIO) ~ \
997 uselargefiles=$(USE_LARGE_FILES) ~ \
998 usesitecustomize=$(USE_SITECUST) ~ \
999 LINK_FLAGS=$(LINK_FLAGS) ~ \
1000 optimize=$(OPTIMIZE)
1003 # set up targets varying between Win95 and WinNT builds
1006 .IF "$(IS_WIN95)" == "define"
1008 RIGHTMAKE = __switch_makefiles
1014 .IMPORT .IGNORE : SystemRoot windir
1016 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
1017 ENV_OS=$(subst,OS=, $(shell @set OS))
1019 .IF "$(ENV_OS)" == "Windows_NT"
1020 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
1022 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
1029 all : CHECKDMAKE .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1030 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
1031 $(PERLEXE) $(X2P) Extensions $(PERLSTATIC)
1033 ..\regnodes.h : ..\regcomp.sym ..\regcomp.pl ..\regexp.h
1034 cd .. && miniperl regcomp.pl && cd win32
1036 ..\regcharclass.h : ..\Porting\regcharclass.pl
1037 cd .. && miniperl Porting\regcharclass.pl && cd win32
1039 regnodes : ..\regnodes.h
1041 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
1043 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
1045 reonly : regnodes .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1046 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
1047 $(X2P) Extensions_reonly
1049 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
1051 static: $(PERLEXESTATIC)
1053 #----------------------------------------------------------------
1055 #-------------------- BEGIN Win95 SPECIFIC ----------------------
1057 # this target is a jump-off point for Win95
1058 # 1. it switches to the Win95-specific makefile if it exists
1059 # (__do_switch_makefiles)
1060 # 2. it prints a message when the Win95-specific one finishes (__done)
1061 # 3. it then kills this makefile by trying to make __no_such_target
1063 __switch_makefiles: __do_switch_makefiles __done __no_such_target
1065 __do_switch_makefiles:
1066 .IF "$(NOTFIRST)" != "true"
1067 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
1072 .IF "$(NOTFIRST)" != "true"
1074 @echo Build process complete. Ignore any errors after this message.
1075 @echo Run "dmake test" to test and "dmake install" to install
1078 # dummy targets for Win95-specific makefile
1088 # This target is used to generate the new makefile (.\makefile.95) for Win95
1090 .\makefile.95: .\makefile.mk
1091 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1093 #--------------------- END Win95 SPECIFIC ---------------------
1095 # a blank target for when builds don't need to do certain things
1096 # this target added for Win95 port but used to keep the WinNT port able to
1102 .IF "$(NEWDMAKE)" == "define"
1105 @echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions.
1106 @echo Please get the latest dmake from http://search.cpan.org/dist/dmake/
1110 $(GLOBEXE) : perlglob$(o)
1111 .IF "$(CCTYPE)" == "BORLAND"
1112 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1113 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1114 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1115 .ELIF "$(CCTYPE)" == "GCC"
1116 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1118 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1119 perlglob$(o) setargv$(o)
1123 perlglob$(o) : perlglob.c
1125 config.w32 : $(CFGSH_TMPL)
1126 copy $(CFGSH_TMPL) config.w32
1128 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1130 copy $(CFGH_TMPL) config.h
1132 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1133 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1134 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1136 # this target is for when changes to the main config.sh happen
1137 # edit config.{b,v,g}c and make this target once for each supported
1138 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1140 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1141 $(CFGSH_TMPL) > ..\config.sh
1142 -cd .. && del /f perl.exe
1143 -cd .. && del /f perl*.dll
1144 cd .. && perl configpm
1145 -del /f $(CFGH_TMPL)
1147 -perl config_h.PL "INST_VER=$(INST_VER)"
1148 rename config.h $(CFGH_TMPL)
1150 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1151 cd .. && miniperl configpm
1152 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1153 $(XCOPY) ..\*.h $(COREDIR)\*.*
1154 $(XCOPY) *.h $(COREDIR)\*.*
1155 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1156 $(RCOPY) include $(COREDIR)\*.*
1157 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1158 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1160 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1161 .IF "$(CCTYPE)" == "BORLAND"
1162 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1163 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1164 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1165 @$(mktmp c0x32$(o) $(MINI_OBJ),$@,,$(LIBFILES),)
1166 .ELIF "$(CCTYPE)" == "GCC"
1167 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1168 $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
1170 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1171 @$(mktmp $(LIBFILES) $(MINI_OBJ))
1176 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1178 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1179 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1181 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1182 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1184 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1185 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1186 # unless the .IF is true), so instead we use a .ELSE with the default.
1187 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1189 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1190 .IF "$(USE_IMP_SYS)" == "define"
1191 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1193 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1196 # 1. we don't want to rebuild miniperl.exe when config.h changes
1197 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1198 $(MINI_OBJ) : $(CORE_NOCFG_H)
1200 $(WIN32_OBJ) : $(CORE_H)
1202 $(CORE_OBJ) : $(CORE_H)
1204 $(DLL_OBJ) : $(CORE_H)
1206 $(X2P_OBJ) : $(CORE_H)
1208 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1209 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1210 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1211 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1213 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1214 .IF "$(CCTYPE)" == "BORLAND"
1215 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1216 @$(mktmp c0d32$(o) $(PERLDLL_OBJ),$@,, \
1217 $(shell @type Extensions_static) $(LIBFILES),perldll.def)
1219 .ELIF "$(CCTYPE)" == "GCC"
1220 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1221 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1222 $(shell @type Extensions_static) \
1223 $(LIBFILES) $(LKPOST))
1224 dlltool --output-lib $(PERLIMPLIB) \
1225 --dllname $(PERLDLL:b).dll \
1227 --base-file perl.base \
1228 --output-exp perl.exp
1229 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1230 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1231 $(shell @type Extensions_static) \
1232 $(LIBFILES) perl.exp $(LKPOST))
1234 $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
1235 @Extensions_static \
1236 @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1237 $(PERLDLL_RES) $(PERLDLL_OBJ))
1240 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1242 $(PERLSTATICLIB): Extensions_static
1243 .IF "$(CCTYPE)" == "BORLAND"
1244 $(LIB32) $(LIB_FLAGS) $@ \
1245 @$(mktmp $(shell @type Extensions_static) \
1247 .ELIF "$(CCTYPE)" == "GCC"
1248 # XXX: It would be nice if MinGW's ar accepted a temporary file, but this
1249 # doesn't seem to work:
1250 # $(LIB32) $(LIB_FLAGS) $@ \
1251 # $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1252 # $(PERLDLL_OBJ) $(LKPOST))
1253 $(LIB32) $(LIB_FLAGS) $@ \
1254 $(shell @type Extensions_static) \
1257 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1258 @$(mktmp $(PERLDLL_OBJ))
1260 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1262 $(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
1263 $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
1265 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1267 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1268 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1270 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1271 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1273 ..\x2p\hash$(o) : ..\x2p\hash.c
1274 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1276 ..\x2p\str$(o) : ..\x2p\str.c
1277 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1279 ..\x2p\util$(o) : ..\x2p\util.c
1280 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1282 ..\x2p\walk$(o) : ..\x2p\walk.c
1283 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1285 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1286 $(MINIPERL) ..\x2p\find2perl.PL
1287 $(MINIPERL) ..\x2p\s2p.PL
1288 .IF "$(CCTYPE)" == "BORLAND"
1289 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1290 @$(mktmp c0x32$(o) $(X2P_OBJ),$@,,$(LIBFILES),)
1291 .ELIF "$(CCTYPE)" == "GCC"
1292 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1293 $(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST))
1295 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1296 @$(mktmp $(LIBFILES) $(X2P_OBJ))
1300 $(MINIDIR)\globals$(o) : $(UUDMAP_H)
1302 $(UUDMAP_H) : $(GENUUDMAP)
1303 $(GENUUDMAP) >$(UUDMAP_H)
1305 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1306 .IF "$(CCTYPE)" == "BORLAND"
1307 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1308 @$(mktmp c0x32$(o) $(GENUUDMAP_OBJ),$@,,$(LIBFILES),)
1309 .ELIF "$(CCTYPE)" == "GCC"
1310 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1311 $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
1313 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1314 @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ))
1318 perlmain.c : runperl.c
1319 copy runperl.c perlmain.c
1321 perlmain$(o) : perlmain.c
1322 $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c
1324 perlmainst.c : runperl.c
1325 copy runperl.c perlmainst.c
1327 perlmainst$(o) : perlmainst.c
1328 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1330 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1331 .IF "$(CCTYPE)" == "BORLAND"
1332 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1333 @$(mktmp c0x32$(o) $(PERLEXE_OBJ),$@,, \
1334 $(PERLIMPLIB) $(LIBFILES),,$(PERLEXE_RES))
1335 .ELIF "$(CCTYPE)" == "GCC"
1336 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1337 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1339 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1340 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1343 copy $(PERLEXE) $(WPERLEXE)
1344 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1345 copy splittree.pl ..
1346 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1348 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1349 .IF "$(CCTYPE)" == "BORLAND"
1350 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1351 @$(mktmp c0x32$(o) $(PERLEXEST_OBJ),$@,, \
1352 $(shell @type Extensions_static) $(PERLSTATICLIB) $(LIBFILES),, \
1354 .ELIF "$(CCTYPE)" == "GCC"
1355 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1356 $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1357 $(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) \
1358 $(PERLEXE_RES) $(LKPOST))
1360 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1361 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1362 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1366 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1367 if not exist $(AUTODIR) mkdir $(AUTODIR)
1368 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1369 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1370 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1371 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1372 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1373 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1375 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1376 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1378 MakePPPort: $(MINIPERL) $(CONFIGPM)
1379 $(MINIPERL) -I..\lib ..\mkppport
1382 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1384 #-------------------------------------------------------------------------------
1385 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1386 $(XCOPY) ..\*.h $(COREDIR)\*.*
1387 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1388 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1390 Extensions_reonly : buildext.pl $(PERLDEP) $(CONFIGPM)
1391 $(XCOPY) ..\*.h $(COREDIR)\*.*
1392 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1393 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1395 Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
1396 $(XCOPY) ..\*.h $(COREDIR)\*.*
1397 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1398 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1399 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1402 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1403 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1405 Extensions_realclean :
1406 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1407 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1409 #-------------------------------------------------------------------------------
1413 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1414 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1415 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1417 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1418 # so please check that script before making structural changes here
1419 utils: $(PERLEXE) $(X2P)
1420 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1421 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1422 copy ..\README.aix ..\pod\perlaix.pod
1423 copy ..\README.amiga ..\pod\perlamiga.pod
1424 copy ..\README.apollo ..\pod\perlapollo.pod
1425 copy ..\README.beos ..\pod\perlbeos.pod
1426 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1427 copy ..\README.ce ..\pod\perlce.pod
1428 copy ..\README.cn ..\pod\perlcn.pod
1429 copy ..\README.cygwin ..\pod\perlcygwin.pod
1430 copy ..\README.dgux ..\pod\perldgux.pod
1431 copy ..\README.dos ..\pod\perldos.pod
1432 copy ..\README.epoc ..\pod\perlepoc.pod
1433 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1434 copy ..\README.hpux ..\pod\perlhpux.pod
1435 copy ..\README.hurd ..\pod\perlhurd.pod
1436 copy ..\README.irix ..\pod\perlirix.pod
1437 copy ..\README.jp ..\pod\perljp.pod
1438 copy ..\README.ko ..\pod\perlko.pod
1439 copy ..\README.linux ..\pod\perllinux.pod
1440 copy ..\README.machten ..\pod\perlmachten.pod
1441 copy ..\README.macos ..\pod\perlmacos.pod
1442 copy ..\README.macosx ..\pod\perlmacosx.pod
1443 copy ..\README.mint ..\pod\perlmint.pod
1444 copy ..\README.mpeix ..\pod\perlmpeix.pod
1445 copy ..\README.netware ..\pod\perlnetware.pod
1446 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1447 copy ..\README.os2 ..\pod\perlos2.pod
1448 copy ..\README.os390 ..\pod\perlos390.pod
1449 copy ..\README.os400 ..\pod\perlos400.pod
1450 copy ..\README.plan9 ..\pod\perlplan9.pod
1451 copy ..\README.qnx ..\pod\perlqnx.pod
1452 copy ..\README.riscos ..\pod\perlriscos.pod
1453 copy ..\README.solaris ..\pod\perlsolaris.pod
1454 copy ..\README.symbian ..\pod\perlsymbian.pod
1455 copy ..\README.tru64 ..\pod\perltru64.pod
1456 copy ..\README.tw ..\pod\perltw.pod
1457 copy ..\README.uts ..\pod\perluts.pod
1458 copy ..\README.vmesa ..\pod\perlvmesa.pod
1459 copy ..\README.vms ..\pod\perlvms.pod
1460 copy ..\README.vos ..\pod\perlvos.pod
1461 copy ..\README.win32 ..\pod\perlwin32.pod
1462 copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
1463 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1464 cd ..\lib && $(PERLEXE) lib_pm.PL
1465 $(PERLEXE) $(PL2BAT) $(UTILS)
1467 # Note that the pod cleanup in this next section is parsed (and regenerated
1468 # by pod/buildtoc so please check that script before making changes here
1470 distclean: realclean
1471 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1472 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
1473 $(PERLEXESTATIC) $(PERLSTATICLIB)
1475 -del /f $(DYNALOADER).c
1476 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1477 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1478 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1479 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1480 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1481 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1482 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1483 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1484 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1485 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1486 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1487 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1488 -del /f $(LIBDIR)\Devel\PPPort.pm
1489 -del /f $(LIBDIR)\File\Glob.pm
1490 -del /f $(LIBDIR)\Storable.pm
1491 -del /f $(LIBDIR)\Digest\MD5.pm
1492 -del /f $(LIBDIR)\Digest\SHA.pm
1493 -del /f $(LIBDIR)\PerlIO\encoding.pm
1494 -del /f $(LIBDIR)\PerlIO\scalar.pm
1495 -del /f $(LIBDIR)\PerlIO\via.pm
1496 -del /f $(LIBDIR)\Sys\Hostname.pm
1497 -del /f $(LIBDIR)\threads\shared.pm
1498 -del /f $(LIBDIR)\Time\HiRes.pm
1499 -del /f $(LIBDIR)\Unicode\Normalize.pm
1500 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1501 -del /f $(LIBDIR)\Win32.pm
1502 -del /f $(LIBDIR)\Win32CORE.pm
1503 -del /f $(LIBDIR)\Win32API\File.pm
1504 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1505 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1506 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1507 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1508 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1509 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1510 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1511 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1512 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1513 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1514 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1515 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1516 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1517 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1518 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1519 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1520 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1521 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1522 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1523 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1524 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1525 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1526 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1527 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1528 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1529 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1530 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1531 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1532 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1534 pod2html pod2latex pod2man pod2text pod2usage \
1535 podchecker podselect
1536 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1537 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1538 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1539 -cd ..\x2p && del /f find2perl s2p psed *.bat
1540 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1545 -del /f $(PERLEXE_ICO) perl.base
1546 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1547 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1548 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1549 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1550 -if exist pod2htmd.tmp del pod2htmd.tmp
1551 -if exist pod2htmi.tmp del pod2htmi.tmp
1552 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1554 install : all installbare installhtml
1556 installbare : $(RIGHTMAKE) utils
1557 $(PERLEXE) ..\installperl
1558 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1559 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1560 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1561 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1562 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1563 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1566 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1568 inst_lib : $(CONFIGPM)
1569 copy splittree.pl ..
1570 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1571 $(RCOPY) ..\lib $(INST_LIB)\*.*
1573 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1574 cd ..\lib\unicore && \
1575 ..\$(MINIPERL) -I.. mktables
1577 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1578 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1579 if exist ..\t\perl.exe del /f ..\t\perl.exe
1580 rename ..\t\miniperl.exe perl.exe
1581 .IF "$(CCTYPE)" == "BORLAND"
1582 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1584 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1588 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1591 $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
1593 cleanup_unpacked_files:
1594 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
1596 test-prep : all utils unpack_files
1597 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1598 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1599 .IF "$(CCTYPE)" == "BORLAND"
1600 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1602 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1605 test : $(RIGHTMAKE) test-prep
1606 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1608 test-reonly : reonly utils
1609 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1610 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1611 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1613 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA) && \
1617 cd .. && regen.pl && cd win32
1619 test-notty : test-prep
1620 set PERL_SKIP_TTY_TEST=1 && \
1621 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1623 _test : $(RIGHTMAKE)
1624 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1625 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1626 .IF "$(CCTYPE)" == "BORLAND"
1627 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1629 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1631 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1634 -@erase miniperlmain$(o)
1636 -@erase perlglob$(o)
1637 -@erase perlmain$(o)
1638 -@erase perlmainst$(o)
1644 -@erase $(PERLEXESTATIC)
1645 -@erase $(PERLSTATICLIB)
1648 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H)
1649 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1650 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1651 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1652 -@erase $(UNIDATAFILES)
1653 -@erase $(WIN32_OBJ)
1656 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1657 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1658 -@erase ..\x2p\*.exe ..\x2p\*.bat
1662 -@erase Extensions_static
1666 _preclean : cleanup_unpacked_files
1668 clean : _preclean Extensions_clean _clean
1670 realclean : _preclean Extensions_realclean MakePPPort_clean _clean
1672 # Handy way to run perlbug -ok without having to install and run the
1673 # installed perlbug. We don't re-run the tests here - we trust the user.
1674 # Please *don't* use this unless all tests pass.
1675 # If you want to report test failures, use "dmake nok" instead.
1677 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1680 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1683 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1686 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok