2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # Borland C++ 5.02 or better
6 # Mingw32 with gcc-2.95.2 or better
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual Studio 98)
101 # Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
105 # Borland 5.02 or later
107 # MinGW with gcc-2.95.2 or later
111 # uncomment this if your Borland compiler is older than v5.4.
114 # uncomment this if you want to use Borland's VCL as your CRT
118 # uncomment this if you are compiling under Windows 95/98 and command.com
119 # (not needed if you're running under 4DOS/NT 6.01 or later)
123 # uncomment next line if you want debug version of perl (big,slow)
124 # If not enabled, we automatically try to use maximum optimization
125 # with all compilers that are known to have a working optimizer.
130 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
131 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
132 # This currently requires VC 5.0 with Service Pack 3 or later.
133 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
134 # and follow the directions in the package to install.
136 # Not recommended if you have VC 6.x and you're not running Windows 9x.
138 #USE_PERLCRT *= define
141 # uncomment to enable linking with setargv.obj under the Visual C
142 # compiler. Setting this options enables perl to expand wildcards in
143 # arguments, but it may be harder to use alternate methods like
144 # File::DosGlob that are more powerful. This option is supported only with
147 #USE_SETARGV *= define
150 # if you want to have the crypt() builtin function implemented, leave this or
151 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
152 # version of des_fcrypt().
154 CRYPT_SRC *= fcrypt.c
157 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
158 # library, uncomment this, and make sure the library exists (see README.win32)
159 # Specify the full pathname of the library.
161 #CRYPT_LIB *= fcrypt.lib
164 # set this if you wish to use perl's malloc
165 # WARNING: Turning this on/off WILL break binary compatibility with extensions
166 # you may have compiled with/without it. Be prepared to recompile all
167 # extensions if you change the default. Currently, this cannot be enabled
168 # if you ask for USE_IMP_SYS above.
170 #PERL_MALLOC *= define
173 # set this to enable debugging mstats
174 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
175 # be enabled without PERL_MALLOC as well.
177 #DEBUG_MSTATS *= define
180 # set the install locations of the compiler include/libraries
181 # Running VCVARS32.BAT is *required* when using Visual C.
182 # Some versions of Visual C don't define MSVCDIR in the environment,
183 # so you may have to set CCHOME explicitly (spaces in the path name should
186 .IF "$(CCTYPE)" == "BORLAND"
187 CCHOME *= C:\Borland\BCC55
188 .ELIF "$(CCTYPE)" == "GCC"
193 CCINCDIR *= $(CCHOME)\include
194 CCLIBDIR *= $(CCHOME)\lib
197 # Additional compiler flags can be specified here.
199 BUILDOPT *= $(BUILDOPTEXTRA)
202 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
203 # internal hash function unless the PERL_HASH_SEED environment variable is set.
204 # Alternatively, adding -DNO_HASH_SEED will completely disable the
205 # randomization feature.
206 # The latter is required to maintain binary compatibility with Perl 5.8.0.
208 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
209 #BUILDOPT += -DNO_HASH_SEED
212 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
213 # for old symbols by default, at the expense of extreme pollution. You most
214 # probably just want to build modules that won't compile with
215 # perl Makefile.PL POLLUTE=1
216 # instead of enabling this. Please report such modules to the respective
219 #BUILDOPT += -DPERL_POLLUTE
222 # This should normally be disabled. Enabling it will disable the File::Glob
223 # implementation of CORE::glob.
225 #BUILDOPT += -DPERL_EXTERNAL_GLOB
228 # This should normally be disabled. Enabling it causes perl to read scripts
229 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
231 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
234 # specify semicolon-separated list of extra directories that modules will
235 # look for libraries (spaces in path names need not be quoted)
240 # set this to point to cmd.exe (only needed if you use some
241 # alternate shell that doesn't grok cmd.exe style commands)
243 #SHELL *= g:\winnt\system32\cmd.exe
246 # set this to your email address (perl will guess a value from
247 # from your loginname and your hostname, which may not be right)
252 ## Build configuration ends.
255 ##################### CHANGE THESE ONLY IF YOU MUST #####################
257 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
261 CRYPT_FLAG = -DHAVE_DES_FCRYPT
265 DEBUG_MSTATS *= undef
267 USE_SITECUST *= undef
269 USE_ITHREADS *= undef
272 USE_LARGE_FILES *= undef
275 .IF "$(USE_IMP_SYS)" == "define"
279 .IF "$(PERL_MALLOC)" == "undef"
283 .IF "$(DEBUG_MSTATS)" == "define"
284 BUILDOPT += -DPERL_DEBUGGING_MSTATS
287 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
291 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
295 .IF "$(USE_SITECUST)" == "define"
296 BUILDOPT += -DUSE_SITECUSTOMIZE
299 .IF "$(USE_MULTI)" != "undef"
300 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
303 .IF "$(USE_IMP_SYS)" != "undef"
304 BUILDOPT += -DPERL_IMPLICIT_SYS
307 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
309 PROCESSOR_ARCHITECTURE *= x86
312 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
313 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
315 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
322 .IF "$(USE_MULTI)" == "define"
323 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
325 .IF "$(USE_PERLIO)" == "define"
326 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
328 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
330 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
333 .IF "$(USE_ITHREADS)" == "define"
334 ARCHNAME !:= $(ARCHNAME)-thread
337 # Visual Studio 98 and .NET 2003 specific
338 # VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
339 # about 10% less time. (The free version of 7.x can't do this, however.)
340 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70"
341 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
344 ARCHDIR = ..\lib\$(ARCHNAME)
345 COREDIR = ..\lib\CORE
346 AUTODIR = ..\lib\auto
350 EXTUTILSDIR = $(LIBDIR)\ExtUtils
353 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
354 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
355 INST_LIB = $(INST_TOP)$(INST_VER)\lib
356 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
357 INST_COREDIR = $(INST_ARCHLIB)\CORE
358 INST_POD = $(INST_LIB)\pod
359 INST_HTML = $(INST_TOP)$(INST_VER)\html
362 # Programs to compile, build .lib files and link
367 .IF "$(CCTYPE)" == "BORLAND"
370 .IF "$(BCCOLD)" != "define"
382 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
383 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
384 DEFINES = -DWIN32 $(CRYPT_FLAG)
385 LOCDEFS = -DPERLDLL -DPERL_CORE
391 # same libs as MSVC, except Borland doesn't have oldnames.lib
392 LIBFILES = $(CRYPT_LIB) \
393 kernel32.lib user32.lib gdi32.lib winspool.lib \
394 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
395 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
396 version.lib odbc32.lib odbccp32.lib \
399 .IF "$(CFG)" == "Debug"
400 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
403 OPTIMIZE = -O2 -D_RTLDLL
408 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
409 $(PCHFLAGS) $(OPTIMIZE)
410 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
415 .IF "$(BCCOLD)" != "define"
417 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
419 .IF "$(BCCVCL)" == "define"
420 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
421 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
425 .ELIF "$(CCTYPE)" == "GCC"
441 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
442 DEFINES = -DWIN32 $(CRYPT_FLAG)
443 LOCDEFS = -DPERLDLL -DPERL_CORE
450 LIBFILES = $(CRYPT_LIB) $(LIBC) \
451 -lmoldname -lkernel32 -luser32 -lgdi32 \
452 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
453 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
454 -lwinmm -lversion -lodbc32 -lodbccp32
456 .IF "$(CFG)" == "Debug"
457 OPTIMIZE = -g -O2 -DDEBUGGING
465 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
466 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
471 # NOTE: we assume that GCC uses MSVCRT.DLL
472 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
478 LIB32 = $(LINK32) -lib
485 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
486 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
487 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
488 LOCDEFS = -DPERLDLL -DPERL_CORE
492 .IF "$(USE_PERLCRT)" != "define"
498 .IF "$(CFG)" == "Debug"
499 .IF "$(CCTYPE)" == "MSVC20"
500 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
502 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
506 OPTIMIZE = -MD -Zi -DNDEBUG
507 # we enable debug symbols in release builds also
508 LINK_DBG = -debug -opt:ref,icf
509 # you may want to enable this if you want COFF symbols in the executables
510 # in addition to the PDB symbols. The default Dr. Watson that ships with
511 # Windows can use the the former but not latter. The free WinDbg can be
512 # installed to get better stack traces from just the PDB symbols, so we
513 # avoid the bloat of COFF symbols by default.
514 #LINK_DBG = $(LINK_DBG) -debugtype:both
515 .IF "$(WIN64)" == "define"
516 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
520 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
526 .IF "$(WIN64)" == "define"
527 DEFINES += -DWIN64 -DCONSERVATIVE
528 OPTIMIZE += -Wp64 -Op
531 # the string-pooling option -Gf is deprecated in VC++ 7.x and will be removed
532 # in later versions, so use read-only string-pooling (-GF) instead
533 .IF "$(CCTYPE)" == "MSVC70FREE" || "$(CCTYPE)" == "MSVC70"
539 .IF "$(USE_PERLCRT)" != "define"
540 BUILDOPT += -DPERL_MSVCRT_READFIX
543 LIBBASEFILES = $(CRYPT_LIB) \
544 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
545 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
546 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
549 # win64 doesn't have some libs
550 .IF "$(WIN64)" != "define"
551 LIBBASEFILES += odbc32.lib odbccp32.lib
554 # we add LIBC here, since we may be using PerlCRT.dll
555 LIBFILES = $(LIBBASEFILES) $(LIBC)
557 EXTRACFLAGS = -nologo $(STRPOOL) -W3
558 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
559 $(PCHFLAGS) $(OPTIMIZE)
560 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
561 -libpath:"$(INST_COREDIR)" \
562 -machine:$(PROCESSOR_ARCHITECTURE)
569 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
571 # used to allow local linking flags that are not propogated into Config.pm,
575 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
577 #################### do not edit below this line #######################
578 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
580 # Some dmake's built with Borland C++, including Sarathy's one at:
581 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
582 # require backslashes to be doubled-up when written to $(mktmp) files.
583 # Other dmake's do not require this and would actually output a double
584 # backslash if they were doubled-up.
585 .IF "$(shell @type $(mktmp \\))"=="\\"
591 # There is a related issue with other escape sequences: Sarathy's old
592 # dmake automatically maps escape sequences like \n to their ASCII values
593 # when used in macros, while other dmake's only do so if this behaviour
594 # is explicitly requested with the :m modifier.
596 .IF "$(shell @type $(mktmp \n))"=="\n"
612 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
615 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
618 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
624 .IF "$(CCTYPE)" == "BORLAND"
625 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
626 $(IMPLIB) $(*B).lib $@
627 .ELIF "$(CCTYPE)" == "GCC"
628 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
629 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
631 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
632 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
636 .IF "$(CCTYPE)" == "GCC"
637 $(RSC) --use-temp-file -i $< -o $@
644 MINIPERL = ..\miniperl.exe
646 PERLEXE = ..\perl.exe
647 WPERLEXE = ..\wperl.exe
648 GLOBEXE = ..\perlglob.exe
649 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
650 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
653 # Unicode data files generated by mktables
654 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
655 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
656 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
657 ..\lib\unicore\PVA.pl
659 # Directories of Unicode data files generated by mktables
660 UNIDATADIR1 = ..\lib\unicore\To
661 UNIDATADIR2 = ..\lib\unicore\lib
663 PERLEXE_ICO = .\perlexe.ico
664 PERLEXE_RES = .\perlexe.res
667 # Nominate a target which causes extensions to be re-built
668 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
669 # on and really only the interface - i.e. the .def file used to export symbols
671 PERLDEP = perldll.def
674 PL2BAT = bin\pl2bat.pl
675 GLOBBAT = bin\perlglob.bat
716 .IF "$(CCTYPE)" == "BORLAND"
718 CFGSH_TMPL = config.bc
719 CFGH_TMPL = config_H.bc
721 .ELIF "$(CCTYPE)" == "GCC"
723 CFGSH_TMPL = config.gc
724 CFGH_TMPL = config_H.gc
725 PERLIMPLIB = ..\libperl59$(a)
729 .IF "$(WIN64)" == "define"
730 CFGSH_TMPL = config.vc64
731 CFGH_TMPL = config_H.vc64
733 CFGSH_TMPL = config.vc
734 CFGH_TMPL = config_H.vc
739 # makedef.pl must be updated if this changes, and this should normally
740 # only change when there is an incompatible revision of the public API.
741 PERLIMPLIB *= ..\perl59$(a)
742 PERLDLL = ..\perl59.dll
744 XCOPY = xcopy /f /r /i /d
745 RCOPY = xcopy /f /r /i /e /d
749 # filenames given to xsubpp must have forward slashes (since it puts
750 # full pathnames in #line strings)
751 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
791 EXTRACORE_SRC += perllib.c
793 .IF "$(PERL_MALLOC)" == "define"
794 EXTRACORE_SRC += ..\malloc.c
797 EXTRACORE_SRC += ..\perlio.c
804 # We need this for miniperl build unless we override canned
805 # config.h #define building mini\*
806 #.IF "$(USE_PERLIO)" == "define"
807 WIN32_SRC += .\win32io.c
810 .IF "$(CRYPT_SRC)" != ""
811 WIN32_SRC += .\$(CRYPT_SRC)
814 DLL_SRC = $(DYNALOADER).c
861 .\include\sys\socket.h \
864 CORE_H = $(CORE_NOCFG_H) .\config.h
866 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
867 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
868 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
869 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
870 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
871 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
872 DLL_OBJ = $(DLL_SRC:db:+$(o))
873 X2P_OBJ = $(X2P_SRC:db:+$(o))
875 PERLDLL_OBJ = $(CORE_OBJ)
876 PERLEXE_OBJ = perlmain$(o)
878 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
880 .IF "$(USE_SETARGV)" != ""
881 SETARGV_OBJ = setargv$(o)
884 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
885 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
886 Sys/Hostname Storable Filter/Util/Call Encode \
887 Digest/MD5 Digest/SHA PerlIO/scalar MIME/Base64 Time/HiRes \
888 Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32
892 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
894 POD2HTML = $(PODDIR)\pod2html
895 POD2MAN = $(PODDIR)\pod2man
896 POD2LATEX = $(PODDIR)\pod2latex
897 POD2TEXT = $(PODDIR)\pod2text
899 # vars must be separated by "\t+~\t+", since we're using the tempfile
900 # version of config_sh.pl (we were overflowing someone's buffer by
901 # trying to fit them all on the command line)
904 INST_DRV=$(INST_DRV) ~ \
905 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
906 INST_VER=$(INST_VER:s,\,$B,) ~ \
907 INST_ARCH=$(INST_ARCH) ~ \
908 archname=$(ARCHNAME) ~ \
911 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
912 cf_email=$(EMAIL) ~ \
913 d_crypt=$(D_CRYPT) ~ \
914 d_mymalloc=$(PERL_MALLOC) ~ \
915 libs=$(LIBFILES:f) ~ \
916 incpath=$(CCINCDIR:s,\,$B,) ~ \
917 libperl=$(PERLIMPLIB:f) ~ \
918 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
925 static_ext=$(STATIC_EXT) ~ \
926 usethreads=$(USE_ITHREADS) ~ \
927 useithreads=$(USE_ITHREADS) ~ \
928 usemultiplicity=$(USE_MULTI) ~ \
929 useperlio=$(USE_PERLIO) ~ \
930 uselargefiles=$(USE_LARGE_FILES) ~ \
931 usesitecustomize=$(USE_SITECUST) ~ \
932 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
936 # set up targets varying between Win95 and WinNT builds
939 .IF "$(IS_WIN95)" == "define"
941 RIGHTMAKE = __switch_makefiles
947 .IMPORT .IGNORE : SystemRoot windir
949 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
950 ENV_OS=$(subst,OS=, $(shell @set OS))
952 .IF "$(ENV_OS)" == "Windows_NT"
953 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
955 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
962 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
963 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
966 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
968 #----------------------------------------------------------------
970 #-------------------- BEGIN Win95 SPECIFIC ----------------------
972 # this target is a jump-off point for Win95
973 # 1. it switches to the Win95-specific makefile if it exists
974 # (__do_switch_makefiles)
975 # 2. it prints a message when the Win95-specific one finishes (__done)
976 # 3. it then kills this makefile by trying to make __no_such_target
978 __switch_makefiles: __do_switch_makefiles __done __no_such_target
980 __do_switch_makefiles:
981 .IF "$(NOTFIRST)" != "true"
982 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
987 .IF "$(NOTFIRST)" != "true"
989 @echo Build process complete. Ignore any errors after this message.
990 @echo Run "dmake test" to test and "dmake install" to install
993 # dummy targets for Win95-specific makefile
1003 # This target is used to generate the new makefile (.\makefile.95) for Win95
1005 .\makefile.95: .\makefile.mk
1006 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1008 #--------------------- END Win95 SPECIFIC ---------------------
1010 # a blank target for when builds don't need to do certain things
1011 # this target added for Win95 port but used to keep the WinNT port able to
1016 $(GLOBEXE) : perlglob$(o)
1017 .IF "$(CCTYPE)" == "BORLAND"
1018 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1019 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1020 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1021 .ELIF "$(CCTYPE)" == "GCC"
1022 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1024 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1025 perlglob$(o) setargv$(o)
1028 perlglob$(o) : perlglob.c
1030 config.w32 : $(CFGSH_TMPL)
1031 copy $(CFGSH_TMPL) config.w32
1033 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1035 copy $(CFGH_TMPL) config.h
1037 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1038 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1039 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1041 # this target is for when changes to the main config.sh happen
1042 # edit config.{b,v,g}c and make this target once for each supported
1043 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1045 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1046 $(CFGSH_TMPL) > ..\config.sh
1047 -cd .. && del /f perl.exe
1048 -cd .. && del /f perl*.dll
1049 cd .. && perl configpm
1050 -del /f $(CFGH_TMPL)
1052 -perl config_h.PL "INST_VER=$(INST_VER)"
1053 rename config.h $(CFGH_TMPL)
1055 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1056 cd .. && miniperl configpm
1057 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1058 $(XCOPY) ..\*.h $(COREDIR)\*.*
1059 $(XCOPY) *.h $(COREDIR)\*.*
1060 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1061 $(RCOPY) include $(COREDIR)\*.*
1062 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1063 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1065 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1066 .IF "$(CCTYPE)" == "BORLAND"
1067 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1068 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1069 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1070 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1071 .ELIF "$(CCTYPE)" == "GCC"
1072 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1073 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1075 $(LINK32) -subsystem:console -out:$@ \
1076 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1080 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1082 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1083 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1085 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1086 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1088 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1089 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1090 # unless the .IF is true), so instead we use a .ELSE with the default.
1091 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1093 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1094 .IF "$(USE_IMP_SYS)" == "define"
1095 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1097 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1100 # 1. we don't want to rebuild miniperl.exe when config.h changes
1101 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1102 $(MINI_OBJ) : $(CORE_NOCFG_H)
1104 $(WIN32_OBJ) : $(CORE_H)
1106 $(CORE_OBJ) : $(CORE_H)
1108 $(DLL_OBJ) : $(CORE_H)
1110 $(X2P_OBJ) : $(CORE_H)
1112 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1113 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1114 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1115 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1117 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1118 .IF "$(CCTYPE)" == "BORLAND"
1119 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1120 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
1122 $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
1125 .ELIF "$(CCTYPE)" == "GCC"
1126 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1127 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1128 $(subst,\,$B $(shell @type Extensions_static)) \
1129 $(LIBFILES) $(LKPOST))
1130 dlltool --output-lib $(PERLIMPLIB) \
1131 --dllname $(PERLDLL:b).dll \
1133 --base-file perl.base \
1134 --output-exp perl.exp
1135 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1136 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1137 $(subst,\,$B $(shell @type Extensions_static)) \
1138 $(LIBFILES) perl.exp $(LKPOST))
1140 $(LINK32) -dll -def:perldll.def -out:$@ \
1141 @Extensions_static \
1142 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1143 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
1145 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1148 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1149 $(MINIPERL) makeico.pl > $@
1151 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1153 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1154 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1156 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1157 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1159 ..\x2p\hash$(o) : ..\x2p\hash.c
1160 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1162 ..\x2p\str$(o) : ..\x2p\str.c
1163 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1165 ..\x2p\util$(o) : ..\x2p\util.c
1166 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1168 ..\x2p\walk$(o) : ..\x2p\walk.c
1169 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1171 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1172 $(MINIPERL) ..\x2p\find2perl.PL
1173 $(MINIPERL) ..\x2p\s2p.PL
1174 .IF "$(CCTYPE)" == "BORLAND"
1175 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1176 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1177 .ELIF "$(CCTYPE)" == "GCC"
1178 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1179 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1181 $(LINK32) -subsystem:console -out:$@ \
1182 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1185 perlmain.c : runperl.c
1186 copy runperl.c perlmain.c
1188 perlmain$(o) : perlmain.c
1189 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1191 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1192 .IF "$(CCTYPE)" == "BORLAND"
1193 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1194 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
1196 $(PERLIMPLIB) $(LIBFILES)$N)
1197 .ELIF "$(CCTYPE)" == "GCC"
1198 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1199 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1201 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1202 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1204 copy $(PERLEXE) $(WPERLEXE)
1205 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1206 copy splittree.pl ..
1207 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1209 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1210 if not exist $(AUTODIR) mkdir $(AUTODIR)
1211 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1212 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1213 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1214 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1215 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1216 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1218 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1219 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1221 #-------------------------------------------------------------------------------
1222 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1223 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1224 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1226 Extensions_static : buildext.pl
1227 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1228 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1229 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1232 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1233 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1235 Extensions_realclean :
1236 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1237 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1239 #-------------------------------------------------------------------------------
1243 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1244 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1245 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1247 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1248 # so please check that script before making structural changes here
1249 utils: $(PERLEXE) $(X2P)
1250 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1251 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1252 copy ..\README.aix ..\pod\perlaix.pod
1253 copy ..\README.amiga ..\pod\perlamiga.pod
1254 copy ..\README.apollo ..\pod\perlapollo.pod
1255 copy ..\README.beos ..\pod\perlbeos.pod
1256 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1257 copy ..\README.ce ..\pod\perlce.pod
1258 copy ..\README.cn ..\pod\perlcn.pod
1259 copy ..\README.cygwin ..\pod\perlcygwin.pod
1260 copy ..\README.dgux ..\pod\perldgux.pod
1261 copy ..\README.dos ..\pod\perldos.pod
1262 copy ..\README.epoc ..\pod\perlepoc.pod
1263 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1264 copy ..\README.hpux ..\pod\perlhpux.pod
1265 copy ..\README.hurd ..\pod\perlhurd.pod
1266 copy ..\README.irix ..\pod\perlirix.pod
1267 copy ..\README.jp ..\pod\perljp.pod
1268 copy ..\README.ko ..\pod\perlko.pod
1269 copy ..\README.linux ..\pod\perllinux.pod
1270 copy ..\README.machten ..\pod\perlmachten.pod
1271 copy ..\README.macos ..\pod\perlmacos.pod
1272 copy ..\README.macosx ..\pod\perlmacosx.pod
1273 copy ..\README.mint ..\pod\perlmint.pod
1274 copy ..\README.mpeix ..\pod\perlmpeix.pod
1275 copy ..\README.netware ..\pod\perlnetware.pod
1276 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1277 copy ..\README.os2 ..\pod\perlos2.pod
1278 copy ..\README.os390 ..\pod\perlos390.pod
1279 copy ..\README.os400 ..\pod\perlos400.pod
1280 copy ..\README.plan9 ..\pod\perlplan9.pod
1281 copy ..\README.qnx ..\pod\perlqnx.pod
1282 copy ..\README.solaris ..\pod\perlsolaris.pod
1283 copy ..\README.symbian ..\pod\perlsymbian.pod
1284 copy ..\README.tru64 ..\pod\perltru64.pod
1285 copy ..\README.tw ..\pod\perltw.pod
1286 copy ..\README.uts ..\pod\perluts.pod
1287 copy ..\README.vmesa ..\pod\perlvmesa.pod
1288 copy ..\README.vms ..\pod\perlvms.pod
1289 copy ..\README.vos ..\pod\perlvos.pod
1290 copy ..\README.win32 ..\pod\perlwin32.pod
1291 copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
1292 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1293 cd ..\lib && $(PERLEXE) lib_pm.PL
1294 $(PERLEXE) $(PL2BAT) $(UTILS)
1296 # Note that the pod cleanup in this next section is parsed (and regenerated
1297 # by pod/buildtoc so please check that script before making changes here
1299 # the doubled rmdir calls are needed because older cmd shells
1300 # don't understand /q
1301 distclean: realclean
1302 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1303 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1305 -del /f $(DYNALOADER).c
1306 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1307 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1308 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1309 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1310 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1311 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1312 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1313 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1314 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1315 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1316 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1317 -del /f $(LIBDIR)\ByteLoader.pm
1318 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1319 -del /f $(LIBDIR)\Devel\PPPort.pm
1320 -del /f $(LIBDIR)\File\Glob.pm
1321 -del /f $(LIBDIR)\Storable.pm
1322 -del /f $(LIBDIR)\Digest\MD5.pm
1323 -del /f $(LIBDIR)\Digest\SHA.pm
1324 -del /f $(LIBDIR)\PerlIO\encoding.pm
1325 -del /f $(LIBDIR)\PerlIO\scalar.pm
1326 -del /f $(LIBDIR)\PerlIO\via.pm
1327 -del /f $(LIBDIR)\Sys\Hostname.pm
1328 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1329 -del /f $(LIBDIR)\threads\shared.pm
1330 -del /f $(LIBDIR)\Time\HiRes.pm
1331 -del /f $(LIBDIR)\Unicode\Normalize.pm
1332 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1333 -del /f $(LIBDIR)\Win32.pm
1334 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1335 -if exist $(LIBDIR)\IO\Socket rmdir /s $(LIBDIR)\IO\Socket
1336 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1337 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1338 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1339 -if exist $(LIBDIR)\Compress rmdir /s $(LIBDIR)\Compress
1340 -if exist $(LIBDIR)\CompressPlugin rmdir /s /q $(LIBDIR)\CompressPlugin
1341 -if exist $(LIBDIR)\CompressPlugin rmdir /s $(LIBDIR)\CompressPlugin
1342 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1343 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1344 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1345 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1346 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1347 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1348 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1349 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1350 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1351 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1352 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1353 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1354 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1355 -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
1356 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1357 -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
1358 -if exist $(LIBDIR)\UncompressPlugin rmdir /s /q $(LIBDIR)\UncompressPlugin
1359 -if exist $(LIBDIR)\UncompressPlugin rmdir /s $(LIBDIR)\UncompressPlugin
1360 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1361 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1362 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1363 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1364 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1365 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1366 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1367 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1368 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1369 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1370 perlos400.pod perlplan9.pod perlqnx.pod perlsolaris.pod \
1371 perlsymbian.pod perltru64.pod perltw.pod perluts.pod \
1372 perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod perlwin32.pod \
1373 pod2html pod2latex pod2man pod2text pod2usage \
1374 podchecker podselect
1375 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1376 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1377 xsubpp instmodsh prove ptar shasum corelist
1378 -cd ..\x2p && del /f find2perl s2p psed *.bat
1379 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1383 -del /f $(PERLEXE_ICO) perl.base
1384 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1385 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1386 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1387 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1388 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1389 -if exist $(COREDIR) rmdir /s $(COREDIR)
1391 install : all installbare installhtml
1393 installbare : $(RIGHTMAKE) utils
1394 $(PERLEXE) ..\installperl
1395 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1396 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1397 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1398 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1399 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1402 $(RCOPY) html\*.* $(INST_HTML)\*.*
1404 inst_lib : $(CONFIGPM)
1405 copy splittree.pl ..
1406 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1407 $(RCOPY) ..\lib $(INST_LIB)\*.*
1409 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1410 cd ..\lib\unicore && \
1411 ..\$(MINIPERL) -I.. mktables
1413 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1414 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1415 if exist ..\t\perl.exe del /f ..\t\perl.exe
1416 rename ..\t\miniperl.exe perl.exe
1417 .IF "$(CCTYPE)" == "BORLAND"
1418 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1420 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1424 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1426 test-prep : all utils
1427 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1428 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1429 .IF "$(CCTYPE)" == "BORLAND"
1430 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1432 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1435 test : $(RIGHTMAKE) test-prep
1436 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1438 test-notty : test-prep
1439 set PERL_SKIP_TTY_TEST=1 && \
1440 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1442 _test : $(RIGHTMAKE)
1443 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1444 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1445 .IF "$(CCTYPE)" == "BORLAND"
1446 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1448 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1450 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1452 # the doubled rmdir calls are needed because older cmd shells
1453 # don't understand /q
1455 -@erase miniperlmain$(o)
1457 -@erase perlglob$(o)
1458 -@erase perlmain$(o)
1466 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1467 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1468 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1469 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1470 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1471 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1472 -@erase $(UNIDATAFILES)
1473 -@erase $(WIN32_OBJ)
1476 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1477 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1478 -@erase ..\x2p\*.exe ..\x2p\*.bat
1482 -@erase Extensions_static
1484 clean : Extensions_clean _clean
1486 realclean : Extensions_realclean _clean
1488 # Handy way to run perlbug -ok without having to install and run the
1489 # installed perlbug. We don't re-run the tests here - we trust the user.
1490 # Please *don't* use this unless all tests pass.
1491 # If you want to report test failures, use "dmake nok" instead.
1493 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1496 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1499 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1502 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok