2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # Comment this out if you don't want to enable large file support for
80 # some reason. Should normally only be changed to maintain compatibility
81 # with an older release of perl.
82 USE_LARGE_FILES *= define
85 # uncomment exactly one of the following
89 # Visual C++ > 2.x and < 6.x
93 # Borland 5.02 or later
95 # mingw32+gcc-2.95.2 or better
97 # Uncomment this if you are using the latest MinGW release (2.0.0)
99 #USE_GCC_V3_2 *= define
102 # uncomment this if your Borland compiler is older than v5.4.
105 # uncomment this if you want to use Borland's VCL as your CRT
109 # uncomment this if you are compiling under Windows 95/98 and command.com
110 # (not needed if you're running under 4DOS/NT 6.01 or later)
114 # uncomment next line if you want debug version of perl (big,slow)
115 # If not enabled, we automatically try to use maximum optimization
116 # with all compilers that are known to have a working optimizer.
121 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
122 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
123 # This currently requires VC 5.0 with Service Pack 3 or later.
124 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
125 # and follow the directions in the package to install.
127 # Not recommended if you have VC 6.x and you're not running Windows 9x.
129 #USE_PERLCRT *= define
132 # uncomment to enable linking with setargv.obj under the Visual C
133 # compiler. Setting this options enables perl to expand wildcards in
134 # arguments, but it may be harder to use alternate methods like
135 # File::DosGlob that are more powerful. This option is supported only with
138 #USE_SETARGV *= define
141 # if you want to have the crypt() builtin function implemented, leave this or
142 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
143 # version of des_fcrypt().
145 CRYPT_SRC *= fcrypt.c
148 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
149 # library, uncomment this, and make sure the library exists (see README.win32)
150 # Specify the full pathname of the library.
152 #CRYPT_LIB *= fcrypt.lib
155 # set this if you wish to use perl's malloc
156 # WARNING: Turning this on/off WILL break binary compatibility with extensions
157 # you may have compiled with/without it. Be prepared to recompile all
158 # extensions if you change the default. Currently, this cannot be enabled
159 # if you ask for USE_IMP_SYS above.
161 #PERL_MALLOC *= define
164 # set the install locations of the compiler include/libraries
165 # Running VCVARS32.BAT is *required* when using Visual C.
166 # Some versions of Visual C don't define MSVCDIR in the environment,
167 # so you may have to set CCHOME explicitly (spaces in the path name should
170 .IF "$(CCTYPE)" == "BORLAND"
171 CCHOME *= C:\borland\bcc55
172 .ELIF "$(CCTYPE)" == "GCC"
177 CCINCDIR *= $(CCHOME)\include
178 CCLIBDIR *= $(CCHOME)\lib
181 # Additional compiler flags can be specified here.
185 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
186 # for old symbols by default, at the expense of extreme pollution. You most
187 # probably just want to build modules that won't compile with
188 # perl Makefile.PL POLLUTE=1
189 # instead of enabling this. Please report such modules to the respective
192 #BUILDOPT += -DPERL_POLLUTE
195 # This should normally be disabled. Enabling it will disable the File::Glob
196 # implementation of CORE::glob.
198 #BUILDOPT += -DPERL_EXTERNAL_GLOB
201 # This should normally be disabled. Enabling it causes perl to read scripts
202 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
203 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
206 # specify semicolon-separated list of extra directories that modules will
207 # look for libraries (spaces in path names need not be quoted)
212 # set this to point to cmd.exe (only needed if you use some
213 # alternate shell that doesn't grok cmd.exe style commands)
215 #SHELL *= g:\winnt\system32\cmd.exe
218 # set this to your email address (perl will guess a value from
219 # from your loginname and your hostname, which may not be right)
224 ## Build configuration ends.
227 ##################### CHANGE THESE ONLY IF YOU MUST #####################
229 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
233 CRYPT_FLAG = -DHAVE_DES_FCRYPT
239 USE_ITHREADS *= undef
242 USE_LARGE_FILES *= undef
245 .IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
249 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
253 .IF "$(USE_MULTI)" != "undef"
254 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
257 .IF "$(USE_IMP_SYS)" != "undef"
258 BUILDOPT += -DPERL_IMPLICIT_SYS
261 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
263 PROCESSOR_ARCHITECTURE *= x86
266 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
267 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
269 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
276 .IF "$(USE_MULTI)" == "define"
277 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
279 .IF "$(USE_PERLIO)" == "define"
280 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
282 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
287 .IF "$(USE_ITHREADS)" == "define"
288 ARCHNAME !:= $(ARCHNAME)-thread
291 # Visual Studio 98 specific
292 .IF "$(CCTYPE)" == "MSVC60"
294 # VC 6.0 can load the socket dll on demand. Makes the test suite
295 # run in about 10% less time.
296 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
298 .IF "$(CFG)" == "Debug"
300 # VC 6.0 seems capable of compiling perl correctly with optimizations
301 # enabled. Anything earlier fails tests.
306 ARCHDIR = ..\lib\$(ARCHNAME)
307 COREDIR = ..\lib\CORE
308 AUTODIR = ..\lib\auto
312 EXTUTILSDIR = $(LIBDIR)\ExtUtils
315 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
316 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
317 INST_LIB = $(INST_TOP)$(INST_VER)\lib
318 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
319 INST_COREDIR = $(INST_ARCHLIB)\CORE
320 INST_POD = $(INST_LIB)\pod
321 INST_HTML = $(INST_TOP)$(INST_VER)\html
324 # Programs to compile, build .lib files and link
329 .IF "$(CCTYPE)" == "BORLAND"
332 .IF "$(BCCOLD)" != "define"
344 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
345 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
346 DEFINES = -DWIN32 $(CRYPT_FLAG)
347 LOCDEFS = -DPERLDLL -DPERL_CORE
352 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
354 .IF "$(CFG)" == "Debug"
355 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
358 OPTIMIZE = -O2 -D_RTLDLL
362 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
363 $(PCHFLAGS) $(OPTIMIZE)
364 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
368 .IF "$(BCCOLD)" != "define"
370 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
372 .IF "$(BCCVCL)" == "define"
373 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
374 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
378 .ELIF "$(CCTYPE)" == "GCC"
382 .IF "$(USE_GCC_V3_2)" == "define"
397 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
398 DEFINES = -DWIN32 $(CRYPT_FLAG)
399 LOCDEFS = -DPERLDLL -DPERL_CORE
406 LIBFILES = $(CRYPT_LIB) $(LIBC) \
407 -lmoldname -lkernel32 -luser32 -lgdi32 \
408 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
409 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
410 -lwinmm -lversion -lodbc32
412 .IF "$(CFG)" == "Debug"
413 OPTIMIZE = -g -O2 -DDEBUGGING
420 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
421 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
426 # NOTE: we assume that GCC uses MSVCRT.DLL
427 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
433 LIB32 = $(LINK32) -lib
440 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
441 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
442 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
443 LOCDEFS = -DPERLDLL -DPERL_CORE
447 .IF "$(USE_PERLCRT)" != "define"
453 .IF "$(CFG)" == "Debug"
454 .IF "$(CCTYPE)" == "MSVC20"
455 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
457 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
461 OPTIMIZE = -MD -DNDEBUG
463 .IF "$(WIN64)" == "define"
464 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
468 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
474 .IF "$(WIN64)" == "define"
475 DEFINES += -DWIN64 -DCONSERVATIVE
476 OPTIMIZE += -Wp64 -Op
479 .IF "$(USE_PERLCRT)" != "define"
480 BUILDOPT += -DPERL_MSVCRT_READFIX
483 LIBBASEFILES = $(CRYPT_LIB) \
484 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
485 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
486 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
489 # win64 doesn't have some libs
490 .IF "$(WIN64)" != "define"
491 LIBBASEFILES += odbc32.lib odbccp32.lib
494 # we add LIBC here, since we may be using PerlCRT.dll
495 LIBFILES = $(LIBBASEFILES) $(LIBC)
497 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
498 $(PCHFLAGS) $(OPTIMIZE)
499 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
500 -libpath:"$(INST_COREDIR)" \
501 -machine:$(PROCESSOR_ARCHITECTURE)
508 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
510 # used to allow local linking flags that are not propogated into Config.pm,
514 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
516 #################### do not edit below this line #######################
517 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
529 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
532 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
535 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
541 .IF "$(CCTYPE)" == "BORLAND"
542 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
543 $(IMPLIB) $(*B).lib $@
544 .ELIF "$(CCTYPE)" == "GCC"
545 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
546 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
548 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
549 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
553 .IF "$(CCTYPE)" == "GCC"
554 $(RSC) --use-temp-file -i $< -o $@
561 MINIPERL = ..\miniperl.exe
563 PERLEXE = ..\perl.exe
564 WPERLEXE = ..\wperl.exe
565 GLOBEXE = ..\perlglob.exe
566 CONFIGPM = ..\lib\Config.pm
567 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
570 PERLEXE_ICO = .\perlexe.ico
571 PERLEXE_RES = .\perlexe.res
574 # Nominate a target which causes extensions to be re-built
575 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
576 # on and really only the interface - i.e. the .def file used to export symbols
578 PERLDEP = perldll.def
581 PL2BAT = bin\pl2bat.pl
582 GLOBBAT = bin\perlglob.bat
620 .IF "$(CCTYPE)" == "BORLAND"
622 CFGSH_TMPL = config.bc
623 CFGH_TMPL = config_H.bc
625 .ELIF "$(CCTYPE)" == "GCC"
627 CFGSH_TMPL = config.gc
628 CFGH_TMPL = config_H.gc
629 PERLIMPLIB = ..\libperl59$(a)
633 .IF "$(WIN64)" == "define"
634 CFGSH_TMPL = config.vc64
635 CFGH_TMPL = config_H.vc64
637 CFGSH_TMPL = config.vc
638 CFGH_TMPL = config_H.vc
643 # makedef.pl must be updated if this changes, and this should normally
644 # only change when there is an incompatible revision of the public API.
645 PERLIMPLIB *= ..\perl59$(a)
646 PERLDLL = ..\perl59.dll
648 XCOPY = xcopy /f /r /i /d
649 RCOPY = xcopy /f /r /i /e /d
653 # filenames given to xsubpp must have forward slashes (since it puts
654 # full pathnames in #line strings)
655 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
694 EXTRACORE_SRC += perllib.c
696 .IF "$(PERL_MALLOC)" == "define"
697 EXTRACORE_SRC += ..\malloc.c
700 EXTRACORE_SRC += ..\perlio.c
707 # We need this for miniperl build unless we override canned
708 # config.h #define building mini\*
709 #.IF "$(USE_PERLIO)" == "define"
710 WIN32_SRC += .\win32io.c
713 .IF "$(CRYPT_SRC)" != ""
714 WIN32_SRC += .\$(CRYPT_SRC)
717 DLL_SRC = $(DYNALOADER).c
763 .\include\sys\socket.h \
766 CORE_H = $(CORE_NOCFG_H) .\config.h
768 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
769 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
770 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
771 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
772 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
773 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
774 DLL_OBJ = $(DLL_SRC:db:+$(o))
775 X2P_OBJ = $(X2P_SRC:db:+$(o))
777 PERLDLL_OBJ = $(CORE_OBJ)
778 PERLEXE_OBJ = perlmain$(o)
780 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
782 .IF "$(USE_SETARGV)" != ""
783 SETARGV_OBJ = setargv$(o)
786 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
787 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
788 Sys/Hostname Storable Filter/Util/Call Encode \
789 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
791 STATIC_EXT = DynaLoader
794 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
796 POD2HTML = $(PODDIR)\pod2html
797 POD2MAN = $(PODDIR)\pod2man
798 POD2LATEX = $(PODDIR)\pod2latex
799 POD2TEXT = $(PODDIR)\pod2text
801 # vars must be separated by "\t+~\t+", since we're using the tempfile
802 # version of config_sh.pl (we were overflowing someone's buffer by
803 # trying to fit them all on the command line)
806 INST_DRV=$(INST_DRV) ~ \
807 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
808 INST_VER=$(INST_VER:s/\/\\/) ~ \
809 INST_ARCH=$(INST_ARCH) ~ \
810 archname=$(ARCHNAME) ~ \
813 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
814 cf_email=$(EMAIL) ~ \
815 d_crypt=$(D_CRYPT) ~ \
816 d_mymalloc=$(PERL_MALLOC) ~ \
817 libs=$(LIBFILES:f) ~ \
818 incpath=$(CCINCDIR:s/\/\\/) ~ \
819 libperl=$(PERLIMPLIB:f) ~ \
820 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
827 static_ext=$(STATIC_EXT) ~ \
828 usethreads=$(USE_ITHREADS) ~ \
829 useithreads=$(USE_ITHREADS) ~ \
830 usemultiplicity=$(USE_MULTI) ~ \
831 useperlio=$(USE_PERLIO) ~ \
832 uselargefiles=$(USE_LARGE_FILES) ~ \
833 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
837 # set up targets varying between Win95 and WinNT builds
840 .IF "$(IS_WIN95)" == "define"
842 RIGHTMAKE = __switch_makefiles
853 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
854 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
857 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
859 #----------------------------------------------------------------
861 #-------------------- BEGIN Win95 SPECIFIC ----------------------
863 # this target is a jump-off point for Win95
864 # 1. it switches to the Win95-specific makefile if it exists
865 # (__do_switch_makefiles)
866 # 2. it prints a message when the Win95-specific one finishes (__done)
867 # 3. it then kills this makefile by trying to make __no_such_target
869 __switch_makefiles: __do_switch_makefiles __done __no_such_target
871 __do_switch_makefiles:
872 .IF "$(NOTFIRST)" != "true"
873 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
878 .IF "$(NOTFIRST)" != "true"
880 @echo Build process complete. Ignore any errors after this message.
881 @echo Run "dmake test" to test and "dmake install" to install
884 # dummy targets for Win95-specific makefile
894 # This target is used to generate the new makefile (.\makefile.95) for Win95
896 .\makefile.95: .\makefile.mk
897 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
899 #--------------------- END Win95 SPECIFIC ---------------------
901 # a blank target for when builds don't need to do certain things
902 # this target added for Win95 port but used to keep the WinNT port able to
907 $(GLOBEXE) : perlglob$(o)
908 .IF "$(CCTYPE)" == "BORLAND"
909 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
910 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
911 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
912 .ELIF "$(CCTYPE)" == "GCC"
913 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
915 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
916 perlglob$(o) setargv$(o)
919 perlglob$(o) : perlglob.c
921 config.w32 : $(CFGSH_TMPL)
922 copy $(CFGSH_TMPL) config.w32
924 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
926 copy $(CFGH_TMPL) config.h
928 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
929 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
930 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
932 # this target is for when changes to the main config.sh happen
933 # edit config.{b,v,g}c and make this target once for each supported
934 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
936 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
937 $(CFGSH_TMPL) > ..\config.sh
938 -cd .. && del /f perl.exe
939 -cd .. && del /f perl*.dll
940 cd .. && perl configpm
943 -perl config_h.PL "INST_VER=$(INST_VER)"
944 rename config.h $(CFGH_TMPL)
946 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
947 cd .. && miniperl configpm
948 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
949 $(XCOPY) ..\*.h $(COREDIR)\*.*
950 $(XCOPY) *.h $(COREDIR)\*.*
951 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
952 $(RCOPY) include $(COREDIR)\*.*
953 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
954 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
956 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
957 .IF "$(CCTYPE)" == "BORLAND"
958 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
959 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
960 .ELIF "$(CCTYPE)" == "GCC"
961 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
962 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
964 $(LINK32) -subsystem:console -out:$@ \
965 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
969 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
971 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
972 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
974 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
975 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
977 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
978 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
979 # unless the .IF is true), so instead we use a .ELSE with the default.
980 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
982 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
983 .IF "$(USE_IMP_SYS)" == "define"
984 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
986 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
989 # 1. we don't want to rebuild miniperl.exe when config.h changes
990 # 2. we don't want to rebuild miniperl.exe with non-default config.h
991 $(MINI_OBJ) : $(CORE_NOCFG_H)
993 $(WIN32_OBJ) : $(CORE_H)
994 $(CORE_OBJ) : $(CORE_H)
995 $(DLL_OBJ) : $(CORE_H)
996 $(X2P_OBJ) : $(CORE_H)
998 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
999 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1000 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1002 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
1003 .IF "$(CCTYPE)" == "BORLAND"
1004 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1005 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1010 .ELIF "$(CCTYPE)" == "GCC"
1011 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1012 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1013 dlltool --output-lib $(PERLIMPLIB) \
1014 --dllname $(PERLDLL:b).dll \
1016 --base-file perl.base \
1017 --output-exp perl.exp
1018 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1019 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1022 $(LINK32) -dll -def:perldll.def -out:$@ \
1023 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1024 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1026 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1028 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1029 $(MINIPERL) makeico.pl > $@
1031 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1033 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1034 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1036 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1037 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1039 ..\x2p\hash$(o) : ..\x2p\hash.c
1040 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1042 ..\x2p\str$(o) : ..\x2p\str.c
1043 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1045 ..\x2p\util$(o) : ..\x2p\util.c
1046 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1048 ..\x2p\walk$(o) : ..\x2p\walk.c
1049 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1051 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1052 $(MINIPERL) ..\x2p\find2perl.PL
1053 $(MINIPERL) ..\x2p\s2p.PL
1054 .IF "$(CCTYPE)" == "BORLAND"
1055 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1056 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1057 .ELIF "$(CCTYPE)" == "GCC"
1058 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1059 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1061 $(LINK32) -subsystem:console -out:$@ \
1062 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1065 perlmain.c : runperl.c
1066 copy runperl.c perlmain.c
1068 perlmain$(o) : perlmain.c
1069 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1071 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1072 .IF "$(CCTYPE)" == "BORLAND"
1073 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1074 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1076 $(PERLIMPLIB) $(LIBFILES)\n)
1077 .ELIF "$(CCTYPE)" == "GCC"
1078 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1079 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1081 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1082 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1084 copy $(PERLEXE) $(WPERLEXE)
1085 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1086 copy splittree.pl ..
1087 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1089 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1090 if not exist $(AUTODIR) mkdir $(AUTODIR)
1091 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1092 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1093 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1094 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1095 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1096 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1098 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1099 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1101 #----------------------------------------------------------------------------------
1102 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1103 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1106 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1108 Extensions_realclean :
1109 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1111 #----------------------------------------------------------------------------------
1115 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1116 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1117 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1119 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1120 # so please check that script before making structural changes here
1121 utils: $(PERLEXE) $(X2P)
1122 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1123 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1124 copy ..\README.aix ..\pod\perlaix.pod
1125 copy ..\README.amiga ..\pod\perlamiga.pod
1126 copy ..\README.apollo ..\pod\perlapollo.pod
1127 copy ..\README.beos ..\pod\perlbeos.pod
1128 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1129 copy ..\README.ce ..\pod\perlce.pod
1130 copy ..\README.cn ..\pod\perlcn.pod
1131 copy ..\README.cygwin ..\pod\perlcygwin.pod
1132 copy ..\README.dgux ..\pod\perldgux.pod
1133 copy ..\README.dos ..\pod\perldos.pod
1134 copy ..\README.epoc ..\pod\perlepoc.pod
1135 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1136 copy ..\README.hpux ..\pod\perlhpux.pod
1137 copy ..\README.hurd ..\pod\perlhurd.pod
1138 copy ..\README.irix ..\pod\perlirix.pod
1139 copy ..\README.jp ..\pod\perljp.pod
1140 copy ..\README.ko ..\pod\perlko.pod
1141 copy ..\README.machten ..\pod\perlmachten.pod
1142 copy ..\README.macos ..\pod\perlmacos.pod
1143 copy ..\README.macosx ..\pod\perlmacosx.pod
1144 copy ..\README.mint ..\pod\perlmint.pod
1145 copy ..\README.mpeix ..\pod\perlmpeix.pod
1146 copy ..\README.netware ..\pod\perlnetware.pod
1147 copy ..\README.os2 ..\pod\perlos2.pod
1148 copy ..\README.os390 ..\pod\perlos390.pod
1149 copy ..\README.os400 ..\pod\perlos400.pod
1150 copy ..\README.plan9 ..\pod\perlplan9.pod
1151 copy ..\README.qnx ..\pod\perlqnx.pod
1152 copy ..\README.solaris ..\pod\perlsolaris.pod
1153 copy ..\README.tru64 ..\pod\perltru64.pod
1154 copy ..\README.tw ..\pod\perltw.pod
1155 copy ..\README.uts ..\pod\perluts.pod
1156 copy ..\README.vmesa ..\pod\perlvmesa.pod
1157 copy ..\README.vms ..\pod\perlvms.pod
1158 copy ..\README.vos ..\pod\perlvos.pod
1159 copy ..\README.win32 ..\pod\perlwin32.pod
1160 copy ..\pod\perl591delta.pod ..\pod\perldelta.pod
1161 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1162 cd ..\lib && $(PERLEXE) lib_pm.PL
1163 $(PERLEXE) $(PL2BAT) $(UTILS)
1165 # Note that the pod cleanup in this next section is parsed (and regenerated
1166 # by pod/buildtoc so please check that script before making changes here
1168 distclean: realclean
1169 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1170 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1172 -del /f $(DYNALOADER).c
1173 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1174 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1175 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1176 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1177 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1178 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1179 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1180 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1181 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1182 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1183 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1184 -del /f $(LIBDIR)\ByteLoader.pm
1185 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1186 -del /f $(LIBDIR)\Devel\PPPort.pm
1187 -del /f $(LIBDIR)\File\Glob.pm
1188 -del /f $(LIBDIR)\Storable.pm
1189 -del /f $(LIBDIR)\Digest\MD5.pm
1190 -del /f $(LIBDIR)\PerlIO\encoding.pm
1191 -del /f $(LIBDIR)\PerlIO\scalar.pm
1192 -del /f $(LIBDIR)\PerlIO\via.pm
1193 -del /f $(LIBDIR)\Sys\Hostname.pm
1194 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1195 -del /f $(LIBDIR)\threads\shared.pm
1196 -del /f $(LIBDIR)\Time\HiRes.pm
1197 -del /f $(LIBDIR)\Unicode\Normalize.pm
1198 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1199 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1200 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1201 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1202 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1203 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1204 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1205 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1206 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1207 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1208 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1209 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1210 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1211 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1212 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1213 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1214 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1215 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1216 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1217 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1218 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1219 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1220 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1221 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1222 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1223 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1224 perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
1225 perluts.pod perlvmesa.pod perlvms.pod perlvos.pod perlwin32.pod \
1226 pod2html pod2latex pod2man pod2text pod2usage \
1227 podchecker podselect
1228 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1229 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1230 xsubpp instmodsh prove
1231 -cd ..\x2p && del /f find2perl s2p psed *.bat
1232 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1235 -del /f $(PERLEXE_ICO)
1236 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1237 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1238 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1239 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1240 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1241 -if exist $(COREDIR) rmdir /s $(COREDIR)
1243 install : all installbare installhtml
1245 installbare : $(RIGHTMAKE) utils
1246 $(PERLEXE) ..\installperl
1247 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1248 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1249 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1252 $(RCOPY) html\*.* $(INST_HTML)\*.*
1254 inst_lib : $(CONFIGPM)
1255 copy splittree.pl ..
1256 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1257 $(RCOPY) ..\lib $(INST_LIB)\*.*
1259 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1260 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1261 .IF "$(CCTYPE)" == "BORLAND"
1262 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1264 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1269 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1271 test-prep : all utils
1272 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1273 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1274 .IF "$(CCTYPE)" == "BORLAND"
1275 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1277 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1280 test : $(RIGHTMAKE) test-prep
1281 cd ..\t && $(PERLEXE) -I..\lib harness
1283 test-notty : test-prep
1284 set PERL_SKIP_TTY_TEST=1 && \
1285 cd ..\t && $(PERLEXE) -I.\lib harness
1287 _test : $(RIGHTMAKE)
1288 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1289 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1290 .IF "$(CCTYPE)" == "BORLAND"
1291 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1293 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1295 cd ..\t && $(PERLEXE) -I..\lib harness
1298 -@erase miniperlmain$(o)
1300 -@erase perlglob$(o)
1301 -@erase perlmain$(o)
1309 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1310 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1311 -@erase $(WIN32_OBJ)
1314 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1315 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1316 -@erase ..\x2p\*.exe ..\x2p\*.bat
1320 clean : Extensions_clean _clean
1322 realclean : Extensions_realclean _clean
1324 # Handy way to run perlbug -ok without having to install and run the
1325 # installed perlbug. We don't re-run the tests here - we trust the user.
1326 # Please *don't* use this unless all tests pass.
1327 # If you want to report test failures, use "dmake nok" instead.
1329 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1332 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1335 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1338 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok