2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl58.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # WARNING! This option is deprecated and will eventually go away (enable
80 # USE_ITHREADS instead).
82 # uncomment to enable threads-capabilities. This is incompatible with
83 # USE_ITHREADS, and is only here for people who may have come to rely
84 # on the experimental Thread support that was in 5.005.
86 #USE_5005THREADS *= define
89 # uncomment exactly one of the following
93 # Visual C++ > 2.x and < 6.x
97 # Borland 5.02 or later
99 # mingw32+gcc-2.95.2 or better
103 # uncomment this if your Borland compiler is older than v5.4.
106 # uncomment this if you want to use Borland's VCL as your CRT
110 # uncomment this if you are compiling under Windows 95/98 and command.com
111 # (not needed if you're running under 4DOS/NT 6.01 or later)
115 # uncomment next line if you want debug version of perl (big,slow)
116 # If not enabled, we automatically try to use maximum optimization
117 # with all compilers that are known to have a working optimizer.
122 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
123 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
124 # This currently requires VC 5.0 with Service Pack 3 or later.
125 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
126 # and follow the directions in the package to install.
128 # Not recommended if you have VC 6.x and you're not running Windows 9x.
130 #USE_PERLCRT *= define
133 # uncomment to enable linking with setargv.obj under the Visual C
134 # compiler. Setting this options enables perl to expand wildcards in
135 # arguments, but it may be harder to use alternate methods like
136 # File::DosGlob that are more powerful. This option is supported only with
139 #USE_SETARGV *= define
142 # if you have the source for des_fcrypt(), uncomment this and make sure the
143 # file exists (see README.win32). File should be located in the same
144 # directory as this file.
146 #CRYPT_SRC *= fcrypt.c
149 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
150 # library, uncomment this, and make sure the library exists (see README.win32)
151 # Specify the full pathname of the library.
153 #CRYPT_LIB *= fcrypt.lib
156 # set this if you wish to use perl's malloc
157 # WARNING: Turning this on/off WILL break binary compatibility with extensions
158 # you may have compiled with/without it. Be prepared to recompile all
159 # extensions if you change the default. Currently, this cannot be enabled
160 # if you ask for USE_IMP_SYS above.
162 #PERL_MALLOC *= define
165 # set the install locations of the compiler include/libraries
166 # Running VCVARS32.BAT is *required* when using Visual C.
167 # Some versions of Visual C don't define MSVCDIR in the environment,
168 # so you may have to set CCHOME explicitly (spaces in the path name should
171 .IF "$(CCTYPE)" == "BORLAND"
172 CCHOME *= C:\borland\bcc55
173 .ELIF "$(CCTYPE)" == "GCC"
178 CCINCDIR *= $(CCHOME)\include
179 CCLIBDIR *= $(CCHOME)\lib
182 # Additional compiler flags can be specified here.
186 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
187 # for old symbols by default, at the expense of extreme pollution. You most
188 # probably just want to build modules that won't compile with
189 # perl Makefile.PL POLLUTE=1
190 # instead of enabling this. Please report such modules to the respective
193 #BUILDOPT += -DPERL_POLLUTE
196 # This should normally be disabled. Enabling it will disable the File::Glob
197 # implementation of CORE::glob.
199 #BUILDOPT += -DPERL_EXTERNAL_GLOB
202 # This should normally be disabled. Enabling it causes perl to read scripts
203 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
204 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
207 # specify semicolon-separated list of extra directories that modules will
208 # look for libraries (spaces in path names need not be quoted)
213 # set this to point to cmd.exe (only needed if you use some
214 # alternate shell that doesn't grok cmd.exe style commands)
216 #SHELL *= g:\winnt\system32\cmd.exe
219 # set this to your email address (perl will guess a value from
220 # from your loginname and your hostname, which may not be right)
225 ## Build configuration ends.
228 ##################### CHANGE THESE ONLY IF YOU MUST #####################
230 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
234 CRYPT_FLAG = -DHAVE_DES_FCRYPT
239 USE_5005THREADS *= undef
241 .IF "$(USE_5005THREADS)" == "define"
242 USE_ITHREADS != undef
245 .IF "$(USE_IMP_SYS)" == "define"
250 USE_ITHREADS *= undef
255 .IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
259 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
261 USE_5005THREADS != undef
264 .IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
265 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
268 .IF "$(USE_IMP_SYS)" != "undef"
269 BUILDOPT += -DPERL_IMPLICIT_SYS
272 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
274 PROCESSOR_ARCHITECTURE *= x86
277 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
278 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
280 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
287 .IF "$(USE_5005THREADS)" == "define"
288 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
289 .ELIF "$(USE_MULTI)" == "define"
290 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
292 .IF "$(USE_PERLIO)" == "define"
293 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
295 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
297 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
300 .IF "$(USE_ITHREADS)" == "define"
301 ARCHNAME !:= $(ARCHNAME)-thread
304 # Visual Studio 98 specific
305 .IF "$(CCTYPE)" == "MSVC60"
307 # VC 6.0 can load the socket dll on demand. Makes the test suite
308 # run in about 10% less time.
309 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
311 .IF "$(CFG)" == "Debug"
313 # VC 6.0 seems capable of compiling perl correctly with optimizations
314 # enabled. Anything earlier fails tests.
319 ARCHDIR = ..\lib\$(ARCHNAME)
320 COREDIR = ..\lib\CORE
321 AUTODIR = ..\lib\auto
325 EXTUTILSDIR = $(LIBDIR)\ExtUtils
328 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
329 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
330 INST_LIB = $(INST_TOP)$(INST_VER)\lib
331 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
332 INST_COREDIR = $(INST_ARCHLIB)\CORE
333 INST_POD = $(INST_LIB)\pod
334 INST_HTML = $(INST_TOP)$(INST_VER)\html
337 # Programs to compile, build .lib files and link
342 .IF "$(CCTYPE)" == "BORLAND"
345 .IF "$(BCCOLD)" != "define"
357 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
358 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
359 DEFINES = -DWIN32 $(CRYPT_FLAG)
360 LOCDEFS = -DPERLDLL -DPERL_CORE
365 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
367 .IF "$(CFG)" == "Debug"
368 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
371 OPTIMIZE = -O2 -D_RTLDLL
375 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
376 $(PCHFLAGS) $(OPTIMIZE)
377 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
381 .IF "$(BCCOLD)" != "define"
383 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
385 .IF "$(BCCVCL)" == "define"
386 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
387 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
391 .ELIF "$(CCTYPE)" == "GCC"
407 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
408 DEFINES = -DWIN32 $(CRYPT_FLAG)
409 LOCDEFS = -DPERLDLL -DPERL_CORE
416 LIBFILES = $(CRYPT_LIB) $(LIBC) \
417 -lmoldname -lkernel32 -luser32 -lgdi32 \
418 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
419 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
420 -lwinmm -lversion -lodbc32
422 .IF "$(CFG)" == "Debug"
423 OPTIMIZE = -g -O2 -DDEBUGGING
430 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
431 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
436 # NOTE: we assume that GCC uses MSVCRT.DLL
437 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
443 LIB32 = $(LINK32) -lib
450 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
451 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
452 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
453 LOCDEFS = -DPERLDLL -DPERL_CORE
457 .IF "$(USE_PERLCRT)" != "define"
466 .IF "$(CFG)" == "Debug"
467 .IF "$(CCTYPE)" == "MSVC20"
468 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
470 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
474 OPTIMIZE = -MD -DNDEBUG
476 .IF "$(WIN64)" == "define"
477 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
481 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
487 .IF "$(WIN64)" == "define"
488 DEFINES += -DWIN64 -DCONSERVATIVE
489 OPTIMIZE += -Wp64 -Op
492 .IF "$(USE_PERLCRT)" != "define"
493 BUILDOPT += -DPERL_MSVCRT_READFIX
496 LIBBASEFILES = $(CRYPT_LIB) \
497 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
498 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
499 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
502 # win64 doesn't have some libs
503 .IF "$(WIN64)" != "define"
504 LIBBASEFILES += odbc32.lib odbccp32.lib
507 # we add LIBC here, since we may be using PerlCRT.dll
508 LIBFILES = $(LIBBASEFILES) $(LIBC)
510 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
511 $(PCHFLAGS) $(OPTIMIZE)
512 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
513 -libpath:"$(INST_COREDIR)" \
514 -machine:$(PROCESSOR_ARCHITECTURE)
521 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
523 # used to allow local linking flags that are not propogated into Config.pm,
527 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
529 #################### do not edit below this line #######################
530 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
542 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
545 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
548 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
554 .IF "$(CCTYPE)" == "BORLAND"
555 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
556 $(IMPLIB) $(*B).lib $@
557 .ELIF "$(CCTYPE)" == "GCC"
558 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
559 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
561 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
562 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
570 MINIPERL = ..\miniperl.exe
572 PERLEXE = ..\perl.exe
573 WPERLEXE = ..\wperl.exe
574 GLOBEXE = ..\perlglob.exe
575 CONFIGPM = ..\lib\Config.pm
576 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
579 # Nominate a target which causes extensions to be re-built
580 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
581 # on and really only the interface - i.e. the .def file used to export symbols
583 PERLDEP = perldll.def
586 PL2BAT = bin\pl2bat.pl
587 GLOBBAT = bin\perlglob.bat
615 ..\lib\ExtUtils\xsubpp \
622 .IF "$(CCTYPE)" == "BORLAND"
624 CFGSH_TMPL = config.bc
625 CFGH_TMPL = config_H.bc
627 .ELIF "$(CCTYPE)" == "GCC"
629 CFGSH_TMPL = config.gc
630 CFGH_TMPL = config_H.gc
631 PERLIMPLIB = ..\libperl58$(a)
635 .IF "$(WIN64)" == "define"
636 CFGSH_TMPL = config.vc64
637 CFGH_TMPL = config_H.vc64
639 CFGSH_TMPL = config.vc
640 CFGH_TMPL = config_H.vc
645 # makedef.pl must be updated if this changes, and this should normally
646 # only change when there is an incompatible revision of the public API.
647 PERLIMPLIB *= ..\perl58$(a)
648 PERLDLL = ..\perl58.dll
650 XCOPY = xcopy /f /r /i /d
651 RCOPY = xcopy /f /r /i /e /d
655 # filenames given to xsubpp must have forward slashes (since it puts
656 # full pathnames in #line strings)
657 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
695 EXTRACORE_SRC += perllib.c
697 .IF "$(PERL_MALLOC)" == "define"
698 EXTRACORE_SRC += ..\malloc.c
701 EXTRACORE_SRC += ..\perlio.c
708 # We need this for miniperl build unless we override canned
709 # config.h #define building mini\*
710 #.IF "$(USE_PERLIO)" == "define"
711 WIN32_SRC += .\win32io.c
714 .IF "$(CRYPT_SRC)" != ""
715 WIN32_SRC += .\$(CRYPT_SRC)
718 DLL_SRC = $(DYNALOADER).c
764 .\include\sys\socket.h \
767 CORE_H = $(CORE_NOCFG_H) .\config.h
769 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
770 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
771 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
772 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
773 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
774 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
775 DLL_OBJ = $(DLL_SRC:db:+$(o))
776 X2P_OBJ = $(X2P_SRC:db:+$(o))
778 PERLDLL_OBJ = $(CORE_OBJ)
779 PERLEXE_OBJ = perlmain$(o)
781 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
783 .IF "$(USE_SETARGV)" != ""
784 SETARGV_OBJ = setargv$(o)
787 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
788 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
789 Sys/Hostname Storable Filter/Util/Call Encode \
790 Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes \
792 STATIC_EXT = DynaLoader
795 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
797 POD2HTML = $(PODDIR)\pod2html
798 POD2MAN = $(PODDIR)\pod2man
799 POD2LATEX = $(PODDIR)\pod2latex
800 POD2TEXT = $(PODDIR)\pod2text
802 # vars must be separated by "\t+~\t+", since we're using the tempfile
803 # version of config_sh.pl (we were overflowing someone's buffer by
804 # trying to fit them all on the command line)
807 INST_DRV=$(INST_DRV) ~ \
808 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
809 INST_VER=$(INST_VER:s/\/\\/) ~ \
810 INST_ARCH=$(INST_ARCH) ~ \
811 archname=$(ARCHNAME) ~ \
814 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
815 cf_email=$(EMAIL) ~ \
816 d_crypt=$(D_CRYPT) ~ \
817 d_mymalloc=$(PERL_MALLOC) ~ \
818 libs=$(LIBFILES:f) ~ \
819 incpath=$(CCINCDIR:s/\/\\/) ~ \
820 libperl=$(PERLIMPLIB:f) ~ \
821 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
828 static_ext=$(STATIC_EXT) ~ \
829 use5005threads=$(USE_5005THREADS) ~ \
830 useithreads=$(USE_ITHREADS) ~ \
831 usethreads=$(USE_5005THREADS) ~ \
832 usemultiplicity=$(USE_MULTI) ~ \
833 useperlio=$(USE_PERLIO) ~ \
834 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
838 # set up targets varying between Win95 and WinNT builds
841 .IF "$(IS_WIN95)" == "define"
843 RIGHTMAKE = __switch_makefiles
854 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
855 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
858 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
860 #----------------------------------------------------------------
862 #-------------------- BEGIN Win95 SPECIFIC ----------------------
864 # this target is a jump-off point for Win95
865 # 1. it switches to the Win95-specific makefile if it exists
866 # (__do_switch_makefiles)
867 # 2. it prints a message when the Win95-specific one finishes (__done)
868 # 3. it then kills this makefile by trying to make __no_such_target
870 __switch_makefiles: __do_switch_makefiles __done __no_such_target
872 __do_switch_makefiles:
873 .IF "$(NOTFIRST)" != "true"
874 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
879 .IF "$(NOTFIRST)" != "true"
881 @echo Build process complete. Ignore any errors after this message.
882 @echo Run "dmake test" to test and "dmake install" to install
885 # dummy targets for Win95-specific makefile
895 # This target is used to generate the new makefile (.\makefile.95) for Win95
897 .\makefile.95: .\makefile.mk
898 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
900 #--------------------- END Win95 SPECIFIC ---------------------
902 # a blank target for when builds don't need to do certain things
903 # this target added for Win95 port but used to keep the WinNT port able to
908 $(GLOBEXE) : perlglob$(o)
909 .IF "$(CCTYPE)" == "BORLAND"
910 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
911 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
912 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
913 .ELIF "$(CCTYPE)" == "GCC"
914 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
916 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
917 perlglob$(o) setargv$(o)
920 perlglob$(o) : perlglob.c
922 config.w32 : $(CFGSH_TMPL)
923 copy $(CFGSH_TMPL) config.w32
925 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
927 copy $(CFGH_TMPL) config.h
929 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
930 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
931 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
933 # this target is for when changes to the main config.sh happen
934 # edit config.{b,v,g}c and make this target once for each supported
935 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
937 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
938 $(CFGSH_TMPL) > ..\config.sh
939 -cd .. && del /f perl.exe
940 -cd .. && del /f perl*.dll
941 cd .. && perl configpm
944 -perl config_h.PL "INST_VER=$(INST_VER)"
945 rename config.h $(CFGH_TMPL)
947 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
948 cd .. && miniperl configpm
949 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
950 $(XCOPY) ..\*.h $(COREDIR)\*.*
951 $(XCOPY) *.h $(COREDIR)\*.*
952 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
953 $(RCOPY) include $(COREDIR)\*.*
954 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
955 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
957 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
958 .IF "$(CCTYPE)" == "BORLAND"
959 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
960 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
961 .ELIF "$(CCTYPE)" == "GCC"
962 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
963 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
965 $(LINK32) -subsystem:console -out:$@ \
966 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
970 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
972 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
973 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
975 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
976 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
978 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
979 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
980 # unless the .IF is true), so instead we use a .ELSE with the default.
981 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
983 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
984 .IF "$(USE_IMP_SYS)" == "define"
985 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
987 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
990 # 1. we don't want to rebuild miniperl.exe when config.h changes
991 # 2. we don't want to rebuild miniperl.exe with non-default config.h
992 $(MINI_OBJ) : $(CORE_NOCFG_H)
994 $(WIN32_OBJ) : $(CORE_H)
995 $(CORE_OBJ) : $(CORE_H)
996 $(DLL_OBJ) : $(CORE_H)
997 $(X2P_OBJ) : $(CORE_H)
999 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1000 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1001 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1003 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
1004 .IF "$(CCTYPE)" == "BORLAND"
1005 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1006 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1011 .ELIF "$(CCTYPE)" == "GCC"
1012 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1013 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1014 dlltool --output-lib $(PERLIMPLIB) \
1015 --dllname $(PERLDLL:b).dll \
1017 --base-file perl.base \
1018 --output-exp perl.exp
1019 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1020 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1023 $(LINK32) -dll -def:perldll.def -out:$@ \
1024 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1025 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1027 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1029 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1030 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1032 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1033 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1035 ..\x2p\hash$(o) : ..\x2p\hash.c
1036 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1038 ..\x2p\str$(o) : ..\x2p\str.c
1039 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1041 ..\x2p\util$(o) : ..\x2p\util.c
1042 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1044 ..\x2p\walk$(o) : ..\x2p\walk.c
1045 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1047 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1048 $(MINIPERL) ..\x2p\find2perl.PL
1049 $(MINIPERL) ..\x2p\s2p.PL
1050 .IF "$(CCTYPE)" == "BORLAND"
1051 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1052 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1053 .ELIF "$(CCTYPE)" == "GCC"
1054 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1055 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1057 $(LINK32) -subsystem:console -out:$@ \
1058 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1061 perlmain.c : runperl.c
1062 copy runperl.c perlmain.c
1064 perlmain$(o) : perlmain.c
1065 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1067 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1068 .IF "$(CCTYPE)" == "BORLAND"
1069 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1070 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1072 $(PERLIMPLIB) $(LIBFILES)\n)
1073 .ELIF "$(CCTYPE)" == "GCC"
1074 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1075 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1077 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1078 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1080 copy $(PERLEXE) $(WPERLEXE)
1081 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1082 copy splittree.pl ..
1083 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1085 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1086 if not exist $(AUTODIR) mkdir $(AUTODIR)
1087 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1088 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1089 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1090 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1091 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1092 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1094 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1095 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1097 #----------------------------------------------------------------------------------
1098 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1099 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1102 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1104 #----------------------------------------------------------------------------------
1108 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1109 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1110 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1112 utils: $(PERLEXE) $(X2P)
1113 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1114 copy ..\README.aix ..\pod\perlaix.pod
1115 copy ..\README.amiga ..\pod\perlamiga.pod
1116 copy ..\README.apollo ..\pod\perlapollo.pod
1117 copy ..\README.beos ..\pod\perlbeos.pod
1118 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1119 copy ..\README.ce ..\pod\perlce.pod
1120 copy ..\README.cygwin ..\pod\perlcygwin.pod
1121 copy ..\README.dgux ..\pod\perldgux.pod
1122 copy ..\README.dos ..\pod\perldos.pod
1123 copy ..\README.epoc ..\pod\perlepoc.pod
1124 copy ..\README.hpux ..\pod\perlhpux.pod
1125 copy ..\README.hurd ..\pod\perlhurd.pod
1126 copy ..\README.machten ..\pod\perlmachten.pod
1127 copy ..\README.macos ..\pod\perlmacos.pod
1128 copy ..\README.mint ..\pod\perlmint.pod
1129 copy ..\README.mpeix ..\pod\perlmpeix.pod
1130 copy ..\README.netware ..\pod\perlnetware.pod
1131 copy ..\README.os2 ..\pod\perlos2.pod
1132 copy ..\README.os390 ..\pod\perlos390.pod
1133 copy ..\README.plan9 ..\pod\perlplan9.pod
1134 copy ..\README.qnx ..\pod\perlqnx.pod
1135 copy ..\README.solaris ..\pod\perlsolaris.pod
1136 copy ..\README.tru64 ..\pod\perltru64.pod
1137 copy ..\README.uts ..\pod\perluts.pod
1138 copy ..\README.vmesa ..\pod\perlvmesa.pod
1139 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1140 copy ..\README.vos ..\pod\perlvos.pod
1141 copy ..\README.win32 ..\pod\perlwin32.pod
1142 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1143 cd ..\lib && $(PERLEXE) lib_pm.PL
1144 $(PERLEXE) $(PL2BAT) $(UTILS)
1147 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1148 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1150 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1151 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1152 -del /f $(LIBDIR)\XSLoader.pm
1153 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1154 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1155 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1156 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1157 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1158 -del /f $(LIBDIR)\PerlIO\Scalar.pm
1159 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1160 -del /f $(LIBDIR)\File\Glob.pm
1161 -del /f $(LIBDIR)\Storable.pm
1162 -del /f $(LIBDIR)\Filter\Util\Call.pm
1163 -del /f $(LIBDIR)\Digest\MD5.pm
1164 -del /f $(LIBDIR)\MIME\Base64.pm
1165 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1166 -del /f $(LIBDIR)\Time\HiRes.pm
1167 -del /f $(LIBDIR)\List\Util.pm
1168 -del /f $(LIBDIR)\Scalar\Util.pm
1169 -del /f $(LIBDIR)\Unicode\Normalize.pm
1170 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
1171 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
1172 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
1173 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
1174 -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
1175 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
1176 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
1177 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
1178 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
1179 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
1180 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1181 perlaix.pod perlamiga.pod perlapollo.pod \
1182 perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1183 perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \
1184 perlmachten.pod perlmint.pod \
1185 perlmacos.pod perlmpeix.pod perlnetware.pod \
1186 perlos2.pod perlos390.pod \
1187 perlplan9.pod perlqnx.pod \
1188 perlsolaris.pod perltru64.pod perluts.pod \
1189 perlvmesa.pod perlvms.pod perlvos.pod \
1190 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1191 podchecker podselect
1192 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1193 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv *.bat
1194 -cd ..\x2p && del /f find2perl s2p psed *.bat
1195 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1198 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1199 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1200 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
1201 -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
1203 install : all installbare installhtml
1205 installbare : $(RIGHTMAKE) utils
1206 $(PERLEXE) ..\installperl
1207 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1208 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1209 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1212 $(RCOPY) html\*.* $(INST_HTML)\*.*
1214 inst_lib : $(CONFIGPM)
1215 copy splittree.pl ..
1216 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1217 $(RCOPY) ..\lib $(INST_LIB)\*.*
1219 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1220 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1221 .IF "$(CCTYPE)" == "BORLAND"
1222 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1224 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1229 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1231 test-prep : all utils
1232 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1233 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1234 .IF "$(CCTYPE)" == "BORLAND"
1235 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1237 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1240 test : $(RIGHTMAKE) test-prep
1241 cd ..\t && $(PERLEXE) -I..\lib harness
1243 test-notty : test-prep
1244 set PERL_SKIP_TTY_TEST=1 && \
1245 cd ..\t && $(PERLEXE) -I.\lib harness
1247 test-wide : test-prep
1248 set HARNESS_PERL_SWITCHES=-C && \
1249 cd ..\t && $(PERLEXE) -I..\lib harness
1251 test-wide-notty : test-prep
1252 set PERL_SKIP_TTY_TEST=1 && \
1253 set HARNESS_PERL_SWITCHES=-C && \
1254 cd ..\t && $(PERLEXE) -I..\lib harness
1256 _test : $(RIGHTMAKE)
1257 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1258 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1259 .IF "$(CCTYPE)" == "BORLAND"
1260 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1262 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1264 cd ..\t && $(PERLEXE) -I..\lib harness
1266 clean : Extensions_clean
1267 -@erase miniperlmain$(o)
1269 -@erase perlglob$(o)
1270 -@erase perlmain$(o)
1278 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
1279 -@erase $(WIN32_OBJ)
1282 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1283 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1284 -@erase ..\x2p\*.exe ..\x2p\*.bat
1288 # Handy way to run perlbug -ok without having to install and run the
1289 # installed perlbug. We don't re-run the tests here - we trust the user.
1290 # Please *don't* use this unless all tests pass.
1291 # If you want to report test failures, use "dmake nok" instead.
1293 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1296 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1299 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1302 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok