2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 or later
5 # Borland C++ 5.02 or later
6 # MinGW with gcc-2.95.2 or later
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl511.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
99 # Visual C++ 6.x (aka Visual C++ 98)
101 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
102 #CCTYPE *= MSVC70FREE
103 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
105 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
106 #CCTYPE *= MSVC80FREE
107 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
110 #CCTYPE *= MSVC90FREE
111 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
113 # Borland 5.02 or later
115 # MinGW or mingw-w64 with gcc-2.95.2 or later
119 # uncomment this if your Borland compiler is older than v5.4.
122 # uncomment this if you want to use Borland's VCL as your CRT
126 # uncomment this if you are compiling under Windows 95/98 and command.com
127 # (not needed if you're running under 4DOS/NT 6.01 or later)
131 # uncomment next line if you want debug version of perl (big,slow)
132 # If not enabled, we automatically try to use maximum optimization
133 # with all compilers that are known to have a working optimizer.
138 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
139 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
140 # This currently requires VC 5.0 with Service Pack 3 or later.
141 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
142 # and follow the directions in the package to install.
144 # Not recommended if you have VC 6.x and you're not running Windows 9x.
146 #USE_PERLCRT *= define
149 # uncomment to enable linking with setargv.obj under the Visual C
150 # compiler. Setting this options enables perl to expand wildcards in
151 # arguments, but it may be harder to use alternate methods like
152 # File::DosGlob that are more powerful. This option is supported only with
155 #USE_SETARGV *= define
158 # if you want to have the crypt() builtin function implemented, leave this or
159 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
160 # version of des_fcrypt().
162 CRYPT_SRC *= fcrypt.c
165 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
166 # library, uncomment this, and make sure the library exists (see README.win32)
167 # Specify the full pathname of the library.
169 #CRYPT_LIB *= fcrypt.lib
172 # set this if you wish to use perl's malloc
173 # WARNING: Turning this on/off WILL break binary compatibility with extensions
174 # you may have compiled with/without it. Be prepared to recompile all
175 # extensions if you change the default. Currently, this cannot be enabled
176 # if you ask for USE_IMP_SYS above.
178 #PERL_MALLOC *= define
181 # set this to enable debugging mstats
182 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
183 # be enabled without PERL_MALLOC as well.
185 #DEBUG_MSTATS *= define
188 # set this to additionally provide a statically linked perl-static.exe.
189 # Note that dynamic loading will not work with this perl, so you must
190 # include required modules statically using the STATIC_EXT or ALL_STATIC
191 # variables below. A static library perl511s.lib will also be created.
192 # Ordinary perl.exe is not affected by this option.
194 #BUILD_STATIC *= define
197 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
198 # extension get statically built
199 # This will result in a very large perl executable, but the main purpose
200 # is to have proper linking set so as to be able to create miscellaneous
201 # executables with different built-in extensions
203 #ALL_STATIC *= define
206 # set the install locations of the compiler include/libraries
207 # Running VCVARS32.BAT is *required* when using Visual C.
208 # Some versions of Visual C don't define MSVCDIR in the environment,
209 # so you may have to set CCHOME explicitly (spaces in the path name should
212 .IF "$(CCTYPE)" == "BORLAND"
213 CCHOME *= C:\Borland\BCC55
214 .ELIF "$(CCTYPE)" == "GCC"
219 CCINCDIR *= $(CCHOME)\include
220 CCLIBDIR *= $(CCHOME)\lib
223 # If building with gcc-4.x.x (or x86_64-w64-mingw32-gcc-4.x.x), then
224 # uncomment the following assignment to GCC_4XX, make sure that CCHOME
225 # has been set correctly above, and uncomment the appropriate
227 # The name of the dll can change, depending upon which vendor has supplied
228 # your 4.x.x compiler, and upon the values of "x".
229 # (The dll will be in your mingw/bin folder, so check there if you're
230 # unsure about the correct name.)
231 # Without these corrections, the op/taint.t test script will fail.
234 #GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_sjlj-1.dll
235 #GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_dw2-1.dll
236 #GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_1.dll
239 # uncomment this if you are using x86_64-w64-mingw32 cross-compiler
240 # ie if your gcc executable is called 'x86_64-w64-mingw32-gcc'
241 # instead of the usual 'gcc'.
246 # Additional compiler flags can be specified here.
248 BUILDOPT *= $(BUILDOPTEXTRA)
251 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
252 # internal hash function unless the PERL_HASH_SEED environment variable is set.
253 # Alternatively, adding -DNO_HASH_SEED will completely disable the
254 # randomization feature.
255 # The latter is required to maintain binary compatibility with Perl 5.8.0.
257 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
258 #BUILDOPT += -DNO_HASH_SEED
261 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
262 # for old symbols by default, at the expense of extreme pollution. You most
263 # probably just want to build modules that won't compile with
264 # perl Makefile.PL POLLUTE=1
265 # instead of enabling this. Please report such modules to the respective
268 #BUILDOPT += -DPERL_POLLUTE
271 # This should normally be disabled. Enabling it will disable the File::Glob
272 # implementation of CORE::glob.
274 #BUILDOPT += -DPERL_EXTERNAL_GLOB
277 # This should normally be disabled. Enabling it causes perl to read scripts
278 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
280 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
283 # specify semicolon-separated list of extra directories that modules will
284 # look for libraries (spaces in path names need not be quoted)
289 # set this to point to cmd.exe (only needed if you use some
290 # alternate shell that doesn't grok cmd.exe style commands)
292 #SHELL *= g:\winnt\system32\cmd.exe
295 # set this to your email address (perl will guess a value from
296 # from your loginname and your hostname, which may not be right)
301 ## Build configuration ends.
304 ##################### CHANGE THESE ONLY IF YOU MUST #####################
306 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
310 CRYPT_FLAG = -DHAVE_DES_FCRYPT
314 DEBUG_MSTATS *= undef
316 USE_SITECUST *= undef
318 USE_ITHREADS *= undef
321 USE_LARGE_FILES *= undef
324 .IF "$(USE_IMP_SYS)" == "define"
328 .IF "$(PERL_MALLOC)" == "undef"
332 .IF "$(DEBUG_MSTATS)" == "define"
333 BUILDOPT += -DPERL_DEBUGGING_MSTATS
336 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
340 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
344 .IF "$(USE_SITECUST)" == "define"
345 BUILDOPT += -DUSE_SITECUSTOMIZE
348 .IF "$(USE_MULTI)" != "undef"
349 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
352 .IF "$(USE_IMP_SYS)" != "undef"
353 BUILDOPT += -DPERL_IMPLICIT_SYS
356 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432 WIN64
358 PROCESSOR_ARCHITECTURE *= x86
361 # When we are running from a 32bit cmd.exe on AMD64 then
362 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
364 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
365 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
367 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
374 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
375 .IF "$(ARCHITECTURE)" == "AMD64"
378 .IF "$(ARCHITECTURE)" == "IA64"
382 .IF "$(USE_MULTI)" == "define"
383 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
385 .IF "$(USE_PERLIO)" == "define"
386 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
388 ARCHNAME = MSWin32-$(ARCHITECTURE)
392 .IF "$(USE_ITHREADS)" == "define"
393 ARCHNAME !:= $(ARCHNAME)-thread
396 # Visual C++ 98, .NET 2003, 2005 and 2008 specific.
397 # VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
398 # in about 10% less time. (The free version of 7.x can't do this, but the free
399 # versions of 8.x and 9.x can.)
400 .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
401 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" ||
402 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
403 DELAYLOAD *= -DELAYLOAD:ws2_32.dll delayimp.lib
406 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
407 # DLLs. These either need copying everywhere with the binaries, or else need
408 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
409 # simplicity, embed them if they exist (and delete them afterwards so that they
410 # don't get installed too).
411 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
412 if exist $@.manifest del $@.manifest
413 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
414 if exist $@.manifest del $@.manifest
416 ARCHDIR = ..\lib\$(ARCHNAME)
417 COREDIR = ..\lib\CORE
418 AUTODIR = ..\lib\auto
424 EXTUTILSDIR = $(LIBDIR)\ExtUtils
428 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
429 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
430 INST_LIB = $(INST_TOP)$(INST_VER)\lib
431 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
432 INST_COREDIR = $(INST_ARCHLIB)\CORE
433 INST_HTML = $(INST_TOP)$(INST_VER)\html
436 # Programs to compile, build .lib files and link
441 .IF "$(CCTYPE)" == "BORLAND"
444 .IF "$(BCCOLD)" != "define"
449 LIB32 = tlib /a /P128
456 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
457 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
458 DEFINES = -DWIN32 $(CRYPT_FLAG)
459 LOCDEFS = -DPERLDLL -DPERL_CORE
465 # same libs as MSVC, except Borland doesn't have oldnames.lib
466 LIBFILES = $(CRYPT_LIB) \
467 kernel32.lib user32.lib gdi32.lib winspool.lib \
468 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
469 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
470 version.lib odbc32.lib odbccp32.lib comctl32.lib \
473 .IF "$(CFG)" == "Debug"
474 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
477 OPTIMIZE = -O2 -D_RTLDLL
482 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
483 $(PCHFLAGS) $(OPTIMIZE)
484 LINK_FLAGS = $(LINK_DBG) -x -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
489 .IF "$(BCCOLD)" != "define"
491 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
493 .IF "$(BCCVCL)" == "define"
494 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
495 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
499 .ELIF "$(CCTYPE)" == "GCC"
501 .IF "$(GCCCROSS)" == "define"
502 ARCHPREFIX = x86_64-w64-mingw32-
505 CC = $(ARCHPREFIX)gcc
506 LINK32 = $(ARCHPREFIX)g++
507 LIB32 = $(ARCHPREFIX)ar rc
508 IMPLIB = $(ARCHPREFIX)dlltool
509 RSC = $(ARCHPREFIX)windres
519 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
520 DEFINES = -DWIN32 $(CRYPT_FLAG)
521 .IF "$(WIN64)" == "define"
522 DEFINES += -DWIN64 -DCONSERVATIVE
524 LOCDEFS = -DPERLDLL -DPERL_CORE
528 # Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link
529 # correctly if -lmsvcrt is specified explicitly.
534 LIBFILES = $(CRYPT_LIB) $(LIBC) \
535 -lmoldname -lkernel32 -luser32 -lgdi32 \
536 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
537 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
538 -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
540 .IF "$(CFG)" == "Debug"
541 OPTIMIZE = -g -O2 -DDEBUGGING
549 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
550 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
555 # NOTE: we assume that GCC uses MSVCRT.DLL
556 # See comments about PERL_MSVCRT_READFIX in the "cl" compiler section below.
557 BUILDOPT += -fno-strict-aliasing -mms-bitfields -DPERL_MSVCRT_READFIX
563 LIB32 = $(LINK32) -lib
570 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
571 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
572 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
573 LOCDEFS = -DPERLDLL -DPERL_CORE
577 .IF "$(USE_PERLCRT)" != "define"
583 .IF "$(CFG)" == "Debug"
584 .IF "$(CCTYPE)" == "MSVC20"
585 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
587 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
591 OPTIMIZE = -MD -Zi -DNDEBUG
592 # we enable debug symbols in release builds also
593 LINK_DBG = -debug -opt:ref,icf
594 # you may want to enable this if you want COFF symbols in the executables
595 # in addition to the PDB symbols. The default Dr. Watson that ships with
596 # Windows can use the the former but not latter. The free WinDbg can be
597 # installed to get better stack traces from just the PDB symbols, so we
598 # avoid the bloat of COFF symbols by default.
599 #LINK_DBG = $(LINK_DBG) -debugtype:both
600 .IF "$(WIN64)" == "define"
601 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
605 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
611 .IF "$(WIN64)" == "define"
612 DEFINES += -DWIN64 -DCONSERVATIVE
613 OPTIMIZE += -Wp64 -fp:precise
616 # For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
617 # and POSIX CRT function names being deprecated.
618 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
619 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
620 DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
623 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
624 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
625 # do not require the fix.
626 .IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
627 .IF "$(USE_PERLCRT)" != "define"
628 BUILDOPT += -DPERL_MSVCRT_READFIX
632 LIBBASEFILES = $(CRYPT_LIB) \
633 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
634 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
635 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
636 version.lib odbc32.lib odbccp32.lib
638 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
639 # include the buffer overrun verification code used by the /GS switch.
640 # Since the code links against libraries that are compiled with /GS, this
641 # "security cookie verification" must be included via bufferoverlow.lib.
642 .IF "$(WIN64)" == "define"
643 LIBBASEFILES += bufferoverflowU.lib
646 # we add LIBC here, since we may be using PerlCRT.dll
647 LIBFILES = $(LIBBASEFILES) $(LIBC)
649 EXTRACFLAGS = -nologo -GF -W3
650 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
651 $(PCHFLAGS) $(OPTIMIZE)
652 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
653 -libpath:"$(INST_COREDIR)" \
654 -machine:$(PROCESSOR_ARCHITECTURE)
662 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
664 .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
665 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
666 LINK_FLAGS = $(LINK_FLAGS) "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
668 RSC_FLAGS = -DINCLUDE_MANIFEST
672 # used to allow local linking flags that are not propogated into Config.pm,
676 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
678 #################### do not edit below this line #######################
679 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
681 # Some old dmakes (including Sarathy's one at
682 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip)
683 # don't support logical OR (||) or logical AND (&&) in conditional
684 # expressions and hence don't process this makefile correctly. Determine
685 # whether this is the case so that we can give the user an error message.
702 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
705 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
708 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
714 .IF "$(CCTYPE)" == "BORLAND"
715 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
716 $(IMPLIB) $(*B).lib $@
717 .ELIF "$(CCTYPE)" == "GCC"
718 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
719 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
721 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
722 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
727 .IF "$(CCTYPE)" == "GCC"
728 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
730 $(RSC) -i.. -DINCLUDE_MANIFEST $<
735 MINIPERL = ..\miniperl.exe
737 PERLEXE = ..\perl.exe
738 WPERLEXE = ..\wperl.exe
739 PERLEXESTATIC = ..\perl-static.exe
740 GLOBEXE = ..\perlglob.exe
741 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
742 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
744 GENUUDMAP = ..\generate_uudmap.exe
745 .IF "$(BUILD_STATIC)" == "define"
751 # Unicode data files generated by mktables
752 UNIDATAFILES = ..\lib\unicore\Decomposition.pl \
753 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
754 ..\lib\unicore\Heavy.pl
756 # Directories of Unicode data files generated by mktables
757 UNIDATADIR1 = ..\lib\unicore\To
758 UNIDATADIR2 = ..\lib\unicore\lib
760 PERLEXE_MANIFEST= .\perlexe.manifest
761 PERLEXE_ICO = .\perlexe.ico
762 PERLEXE_RES = .\perlexe.res
765 # Nominate a target which causes extensions to be re-built
766 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
767 # on and really only the interface - i.e. the .def file used to export symbols
769 PERLDEP = perldll.def
772 PL2BAT = bin\pl2bat.pl
773 GLOBBAT = bin\perlglob.bat
789 ..\utils\config_data \
796 ..\utils\cpanp-run-perl \
817 .IF "$(CCTYPE)" == "BORLAND"
819 CFGSH_TMPL = config.bc
820 CFGH_TMPL = config_H.bc
822 .ELIF "$(CCTYPE)" == "GCC"
824 .IF "$(WIN64)" == "define"
825 .IF "$(GCCCROSS)" == "define"
826 CFGSH_TMPL = config.gc64
827 CFGH_TMPL = config_H.gc64
829 CFGSH_TMPL = config.gc64nox
830 CFGH_TMPL = config_H.gc64nox
833 CFGSH_TMPL = config.gc
834 CFGH_TMPL = config_H.gc
836 PERLIMPLIB = ..\libperl511$(a)
837 PERLSTATICLIB = ..\libperl511s$(a)
841 .IF "$(WIN64)" == "define"
842 CFGSH_TMPL = config.vc64
843 CFGH_TMPL = config_H.vc64
845 CFGSH_TMPL = config.vc
846 CFGH_TMPL = config_H.vc
851 # makedef.pl must be updated if this changes, and this should normally
852 # only change when there is an incompatible revision of the public API.
853 PERLIMPLIB *= ..\perl511$(a)
854 PERLSTATICLIB *= ..\perl511s$(a)
855 PERLDLL = ..\perl511.dll
857 XCOPY = xcopy /f /r /i /d /y
858 RCOPY = xcopy /f /r /i /e /d /y
898 EXTRACORE_SRC += perllib.c
900 .IF "$(PERL_MALLOC)" == "define"
901 EXTRACORE_SRC += ..\malloc.c
904 EXTRACORE_SRC += ..\perlio.c
911 # We need this for miniperl build unless we override canned
912 # config.h #define building mini\*
913 #.IF "$(USE_PERLIO)" == "define"
914 WIN32_SRC += .\win32io.c
917 .IF "$(CRYPT_SRC)" != ""
918 WIN32_SRC += .\$(CRYPT_SRC)
965 .\include\sys\socket.h \
968 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
970 UUDMAP_H = ..\uudmap.h
971 BITCOUNT_H = ..\bitcount.h
973 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
974 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
975 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
976 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
977 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
978 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
979 DLL_OBJ = $(DYNALOADER)
980 X2P_OBJ = $(X2P_SRC:db:+$(o))
981 GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
983 PERLDLL_OBJ = $(CORE_OBJ)
984 PERLEXE_OBJ = perlmain$(o)
985 PERLEXEST_OBJ = perlmainst$(o)
987 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
989 .IF "$(USE_SETARGV)" != ""
990 SETARGV_OBJ = setargv$(o)
993 .IF "$(ALL_STATIC)" == "define"
994 # some exclusions, unfortunately, until fixed:
995 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
996 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
997 # - Encode (encoding search algorithm relies on shared library?)
998 STATIC_EXT = * !Win32 !SDBM_File !Encode
1000 # specify static extensions here, for example:
1001 #STATIC_EXT = Cwd Compress/Raw/Zlib
1002 STATIC_EXT = Win32CORE
1005 DYNALOADER = ..\DynaLoader$(o)
1007 # vars must be separated by "\t+~\t+", since we're using the tempfile
1008 # version of config_sh.pl (we were overflowing someone's buffer by
1009 # trying to fit them all on the command line)
1012 INST_DRV=$(INST_DRV) ~ \
1013 INST_TOP=$(INST_TOP) ~ \
1014 INST_VER=$(INST_VER) ~ \
1015 INST_ARCH=$(INST_ARCH) ~ \
1016 archname=$(ARCHNAME) ~ \
1019 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
1020 cf_email=$(EMAIL) ~ \
1021 d_crypt=$(D_CRYPT) ~ \
1022 d_mymalloc=$(PERL_MALLOC) ~ \
1023 libs=$(LIBFILES:f) ~ \
1024 incpath=$(CCINCDIR) ~ \
1025 libperl=$(PERLIMPLIB:f) ~ \
1026 libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
1033 static_ext=$(STATIC_EXT) ~ \
1034 usethreads=$(USE_ITHREADS) ~ \
1035 useithreads=$(USE_ITHREADS) ~ \
1036 usemultiplicity=$(USE_MULTI) ~ \
1037 useperlio=$(USE_PERLIO) ~ \
1038 uselargefiles=$(USE_LARGE_FILES) ~ \
1039 usesitecustomize=$(USE_SITECUST) ~ \
1040 LINK_FLAGS=$(LINK_FLAGS) ~ \
1041 optimize=$(OPTIMIZE)
1044 # set up targets varying between Win95 and WinNT builds
1047 .IF "$(IS_WIN95)" == "define"
1049 RIGHTMAKE = __switch_makefiles
1055 .IMPORT .IGNORE : SystemRoot windir
1057 # Don't just .IMPORT OS from the environment because dmake sets OS itself.
1058 ENV_OS=$(subst,OS=, $(shell @set OS))
1060 .IF "$(ENV_OS)" == "Windows_NT"
1061 ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
1063 ODBCCP32_DLL = $(windir)\system\odbccp32.dll
1066 ICWD = -I..\cpan\Cwd -I..\cpan\Cwd\lib
1072 all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1073 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
1074 $(PERLEXE) $(X2P) Extensions Extensions_nonxs $(PERLSTATIC)
1076 ..\regcharclass.h : ..\Porting\regcharclass.pl
1077 cd .. && miniperl Porting\regcharclass.pl && cd win32
1079 regnodes : ..\regnodes.h
1081 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
1083 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
1085 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
1086 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
1087 $(X2P) Extensions_reonly
1089 static: $(PERLEXESTATIC)
1091 #----------------------------------------------------------------
1093 #-------------------- BEGIN Win95 SPECIFIC ----------------------
1095 # this target is a jump-off point for Win95
1096 # 1. it switches to the Win95-specific makefile if it exists
1097 # (__do_switch_makefiles)
1098 # 2. it prints a message when the Win95-specific one finishes (__done)
1099 # 3. it then kills this makefile by trying to make __no_such_target
1101 __switch_makefiles: __do_switch_makefiles __done __no_such_target
1103 __do_switch_makefiles:
1104 .IF "$(NOTFIRST)" != "true"
1105 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
1110 .IF "$(NOTFIRST)" != "true"
1112 @echo Build process complete. Ignore any errors after this message.
1113 @echo Run "dmake test" to test and "dmake install" to install
1116 # dummy targets for Win95-specific makefile
1126 # This target is used to generate the new makefile (.\makefile.95) for Win95
1128 .\makefile.95: .\makefile.mk
1129 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
1131 #--------------------- END Win95 SPECIFIC ---------------------
1133 # a blank target for when builds don't need to do certain things
1134 # this target added for Win95 port but used to keep the WinNT port able to
1140 .IF "$(NEWDMAKE)" == "define"
1143 @echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions.
1144 @echo Please get the latest dmake from http://search.cpan.org/dist/dmake/
1148 $(GLOBEXE) : perlglob$(o)
1149 .IF "$(CCTYPE)" == "BORLAND"
1150 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
1151 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
1152 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
1153 .ELIF "$(CCTYPE)" == "GCC"
1154 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1156 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1157 perlglob$(o) setargv$(o)
1161 perlglob$(o) : perlglob.c
1163 config.w32 : $(CFGSH_TMPL)
1164 copy $(CFGSH_TMPL) config.w32
1166 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1168 copy $(CFGH_TMPL) config.h
1170 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
1171 cd .. && miniperl -Ilib make_patchnum.pl
1173 # make sure that we recompile perl.c if the git version changes
1174 ..\perl$(o) : ..\git_version.h
1176 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1177 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1178 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1180 # this target is for when changes to the main config.sh happen.
1181 # edit config.gc, then make perl using GCC in a minimal configuration (i.e.
1182 # with MULTI, ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make
1183 # this target to regenerate config_H.gc.
1184 # unfortunately, some further manual editing is also then required to restore all
1185 # the special _MSC_VER handling that is otherwise lost.
1186 # repeat for config.bc and config_H.bc (using BORLAND), except that there is no
1187 # _MSC_VER stuff in that case.
1189 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1190 $(CFGSH_TMPL) > ..\config.sh
1191 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1192 -del /f $(CFGH_TMPL)
1193 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
1194 rename config.h $(CFGH_TMPL)
1196 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1197 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1198 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1199 $(XCOPY) ..\*.h $(COREDIR)\*.*
1200 $(XCOPY) *.h $(COREDIR)\*.*
1201 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1202 $(RCOPY) include $(COREDIR)\*.*
1203 $(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" \
1204 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1206 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1207 .IF "$(CCTYPE)" == "BORLAND"
1208 if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
1209 cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
1210 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1211 @$(mktmp c0x32$(o) $(MINI_OBJ),$@,,$(LIBFILES),)
1212 .ELIF "$(CCTYPE)" == "GCC"
1213 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1214 $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
1216 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1217 @$(mktmp $(LIBFILES) $(MINI_OBJ))
1222 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1224 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1225 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c
1227 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1228 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1230 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1231 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1232 # unless the .IF is true), so instead we use a .ELSE with the default.
1233 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1235 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1236 .IF "$(USE_IMP_SYS)" == "define"
1237 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1239 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1242 # 1. we don't want to rebuild miniperl.exe when config.h changes
1243 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1244 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
1245 $(MINI_OBJ) : $(CORE_NOCFG_H)
1247 $(WIN32_OBJ) : $(CORE_H)
1249 $(CORE_OBJ) : $(CORE_H)
1251 $(DLL_OBJ) : $(CORE_H)
1253 $(X2P_OBJ) : $(CORE_H)
1255 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
1256 $(MINIPERL) -I..\lib create_perllibst_h.pl
1257 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1258 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1260 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1261 .IF "$(CCTYPE)" == "BORLAND"
1262 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1263 @$(mktmp c0d32$(o) $(PERLDLL_OBJ),$@,, \
1264 $(shell @type Extensions_static) $(LIBFILES),perldll.def)
1266 .ELIF "$(CCTYPE)" == "GCC"
1267 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1268 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1269 $(shell @type Extensions_static) \
1270 $(LIBFILES) $(LKPOST))
1271 $(IMPLIB) --output-lib $(PERLIMPLIB) \
1272 --dllname $(PERLDLL:b).dll \
1274 --base-file perl.base \
1275 --output-exp perl.exp
1276 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1277 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1278 $(shell @type Extensions_static) \
1279 $(LIBFILES) perl.exp $(LKPOST))
1281 $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
1282 @Extensions_static \
1283 @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1284 $(PERLDLL_RES) $(PERLDLL_OBJ))
1287 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1289 $(PERLSTATICLIB): Extensions_static
1290 .IF "$(CCTYPE)" == "BORLAND"
1291 $(LIB32) $(LIB_FLAGS) $@ \
1292 @$(mktmp $(shell @type Extensions_static) \
1294 .ELIF "$(CCTYPE)" == "GCC"
1295 # XXX: It would be nice if MinGW's ar accepted a temporary file, but this
1296 # doesn't seem to work:
1297 # $(LIB32) $(LIB_FLAGS) $@ \
1298 # $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1299 # $(PERLDLL_OBJ) $(LKPOST))
1300 $(LIB32) $(LIB_FLAGS) $@ \
1301 $(shell @type Extensions_static) \
1304 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1305 @$(mktmp $(PERLDLL_OBJ))
1307 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1309 $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
1311 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1312 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1314 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1315 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1317 ..\x2p\hash$(o) : ..\x2p\hash.c
1318 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1320 ..\x2p\str$(o) : ..\x2p\str.c
1321 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1323 ..\x2p\util$(o) : ..\x2p\util.c
1324 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1326 ..\x2p\walk$(o) : ..\x2p\walk.c
1327 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1329 $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
1330 $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
1331 $(MINIPERL) -I..\lib ..\x2p\s2p.PL
1332 .IF "$(CCTYPE)" == "BORLAND"
1333 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1334 @$(mktmp c0x32$(o) $(X2P_OBJ),$@,,$(LIBFILES),)
1335 .ELIF "$(CCTYPE)" == "GCC"
1336 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1337 $(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST))
1339 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1340 @$(mktmp $(LIBFILES) $(X2P_OBJ))
1344 $(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
1346 $(UUDMAP_H) $(BITCOUNT_H) : $(GENUUDMAP)
1347 $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
1349 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1350 .IF "$(CCTYPE)" == "BORLAND"
1351 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1352 @$(mktmp c0x32$(o) $(GENUUDMAP_OBJ),$@,,$(LIBFILES),)
1353 .ELIF "$(CCTYPE)" == "GCC"
1354 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1355 $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
1357 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1358 @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ))
1362 perlmain.c : runperl.c
1363 copy runperl.c perlmain.c
1365 perlmain$(o) : perlmain.c
1366 $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c
1368 perlmainst.c : runperl.c
1369 copy runperl.c perlmainst.c
1371 perlmainst$(o) : perlmainst.c
1372 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1374 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1375 .IF "$(CCTYPE)" == "BORLAND"
1376 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1377 @$(mktmp c0x32$(o) $(PERLEXE_OBJ),$@,, \
1378 $(PERLIMPLIB) $(LIBFILES),,$(PERLEXE_RES))
1379 .ELIF "$(CCTYPE)" == "GCC"
1380 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1381 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1383 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1384 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1387 copy $(PERLEXE) $(WPERLEXE)
1388 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1390 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1391 .IF "$(CCTYPE)" == "BORLAND"
1392 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1393 @$(mktmp c0x32$(o) $(PERLEXEST_OBJ),$@,, \
1394 $(shell @type Extensions_static) $(PERLSTATICLIB) $(LIBFILES),, \
1396 .ELIF "$(CCTYPE)" == "GCC"
1397 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1398 $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1399 $(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) \
1400 $(PERLEXE_RES) $(LKPOST))
1402 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1403 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1404 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1408 MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1409 $(MINIPERL) -I..\lib $(ICWD) ..\mkppport
1411 #-------------------------------------------------------------------------------
1412 # There's no direct way to mark a dependency on
1413 # DynaLoader.pm, so this will have to do
1414 Extensions : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1415 $(XCOPY) ..\*.h $(COREDIR)\*.*
1416 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1418 Extensions_reonly : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1419 $(XCOPY) ..\*.h $(COREDIR)\*.*
1420 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1422 Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1423 $(XCOPY) ..\*.h $(COREDIR)\*.*
1424 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1425 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1427 Extensions_nonxs : ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1428 $(XCOPY) ..\*.h $(COREDIR)\*.*
1429 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1431 $(DYNALOADER) : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1432 $(XCOPY) ..\*.h $(COREDIR)\*.*
1433 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1436 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1438 Extensions_realclean :
1439 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1441 #-------------------------------------------------------------------------------
1444 doc: $(PERLEXE) ..\pod\perltoc.pod
1445 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1446 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1447 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1449 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1450 # so please check that script before making structural changes here
1451 utils: $(PERLEXE) $(X2P)
1452 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1453 copy ..\README.aix ..\pod\perlaix.pod
1454 copy ..\README.amiga ..\pod\perlamiga.pod
1455 copy ..\README.apollo ..\pod\perlapollo.pod
1456 copy ..\README.beos ..\pod\perlbeos.pod
1457 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1458 copy ..\README.ce ..\pod\perlce.pod
1459 copy ..\README.cn ..\pod\perlcn.pod
1460 copy ..\README.cygwin ..\pod\perlcygwin.pod
1461 copy ..\README.dgux ..\pod\perldgux.pod
1462 copy ..\README.dos ..\pod\perldos.pod
1463 copy ..\README.epoc ..\pod\perlepoc.pod
1464 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1465 copy ..\README.haiku ..\pod\perlhaiku.pod
1466 copy ..\README.hpux ..\pod\perlhpux.pod
1467 copy ..\README.hurd ..\pod\perlhurd.pod
1468 copy ..\README.irix ..\pod\perlirix.pod
1469 copy ..\README.jp ..\pod\perljp.pod
1470 copy ..\README.ko ..\pod\perlko.pod
1471 copy ..\README.linux ..\pod\perllinux.pod
1472 copy ..\README.macos ..\pod\perlmacos.pod
1473 copy ..\README.macosx ..\pod\perlmacosx.pod
1474 copy ..\README.mpeix ..\pod\perlmpeix.pod
1475 copy ..\README.netware ..\pod\perlnetware.pod
1476 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1477 copy ..\README.os2 ..\pod\perlos2.pod
1478 copy ..\README.os390 ..\pod\perlos390.pod
1479 copy ..\README.os400 ..\pod\perlos400.pod
1480 copy ..\README.plan9 ..\pod\perlplan9.pod
1481 copy ..\README.qnx ..\pod\perlqnx.pod
1482 copy ..\README.riscos ..\pod\perlriscos.pod
1483 copy ..\README.solaris ..\pod\perlsolaris.pod
1484 copy ..\README.symbian ..\pod\perlsymbian.pod
1485 copy ..\README.tru64 ..\pod\perltru64.pod
1486 copy ..\README.tw ..\pod\perltw.pod
1487 copy ..\README.uts ..\pod\perluts.pod
1488 copy ..\README.vmesa ..\pod\perlvmesa.pod
1489 copy ..\README.vos ..\pod\perlvos.pod
1490 copy ..\README.win32 ..\pod\perlwin32.pod
1491 copy ..\pod\perl5113delta.pod ..\pod\perldelta.pod
1492 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1493 $(PERLEXE) $(PL2BAT) $(UTILS)
1494 $(PERLEXE) $(ICWD) ..\autodoc.pl ..
1495 $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
1497 ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1498 $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
1500 # Note that the pod cleanup in this next section is parsed (and regenerated
1501 # by pod/buildtoc so please check that script before making changes here
1503 distclean: realclean
1504 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1505 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
1506 $(PERLEXESTATIC) $(PERLSTATICLIB)
1508 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1509 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1510 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1511 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1512 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1513 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1514 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1515 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1516 -del /f $(LIBDIR)\Devel\PPPort.pm
1517 -del /f $(LIBDIR)\File\Glob.pm
1518 -del /f $(LIBDIR)\Storable.pm
1519 -del /f $(LIBDIR)\Digest\MD5.pm
1520 -del /f $(LIBDIR)\Digest\SHA.pm
1521 -del /f $(LIBDIR)\PerlIO\encoding.pm
1522 -del /f $(LIBDIR)\PerlIO\scalar.pm
1523 -del /f $(LIBDIR)\PerlIO\via.pm
1524 -del /f $(LIBDIR)\Sys\Hostname.pm
1525 -del /f $(LIBDIR)\threads\shared.pm
1526 -del /f $(LIBDIR)\Time\HiRes.pm
1527 -del /f $(LIBDIR)\Unicode\Normalize.pm
1528 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1529 -del /f $(LIBDIR)\Win32.pm
1530 -del /f $(LIBDIR)\Win32CORE.pm
1531 -del /f $(LIBDIR)\Win32API\File.pm
1532 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1533 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1534 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1535 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1536 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1537 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1538 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1539 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1540 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1541 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1542 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1543 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1544 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1545 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1546 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1547 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1548 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1549 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1550 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1551 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1552 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1553 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1554 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1555 -cd $(PODDIR) && del /f *.html *.bat podchecker \
1556 perlaix.pod perlamiga.pod perlapi.pod perlapollo.pod \
1557 perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
1558 perlcygwin.pod perldelta.pod perldgux.pod perldos.pod \
1559 perlepoc.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1560 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1561 perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
1562 perlmpeix.pod perlnetware.pod perlopenbsd.pod perlos2.pod \
1563 perlos390.pod perlos400.pod perlplan9.pod perlqnx.pod \
1564 perlriscos.pod perlsolaris.pod perlsymbian.pod perltoc.pod \
1565 perltru64.pod perltw.pod perluniprops.pod perluts.pod \
1566 perlvmesa.pod perlvos.pod perlwin32.pod \
1567 pod2html pod2latex pod2man pod2text pod2usage \
1569 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1570 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1571 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1572 -cd ..\x2p && del /f find2perl s2p psed *.bat
1573 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1576 -del /f ..\lib\Config_git.pl
1579 -del /f $(PERLEXE_RES) perl.base
1580 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib ppport.h
1581 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1582 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1583 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1584 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1585 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1586 -if exist pod2htmd.tmp del pod2htmd.tmp
1587 -if exist pod2htmi.tmp del pod2htmi.tmp
1588 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1589 -del /f ..\t\test_state
1591 install : all installbare installhtml
1593 installbare : $(RIGHTMAKE) utils ..\pod\perltoc.pod
1594 $(PERLEXE) ..\installperl
1595 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1596 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1597 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1598 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1599 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1600 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1603 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1605 inst_lib : $(CONFIGPM)
1606 $(RCOPY) ..\lib $(INST_LIB)\*.*
1608 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1609 cd ..\lib\unicore && \
1610 ..\$(MINIPERL) -I.. -I..\..\cpan\Cwd\lib -I..\..\cpan\Cwd mktables
1612 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1613 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1614 if exist ..\t\perl.exe del /f ..\t\perl.exe
1615 rename ..\t\miniperl.exe perl.exe
1616 .IF "$(CCTYPE)" == "BORLAND"
1617 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1619 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1623 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1625 test-prep : all utils
1626 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1627 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1628 .IF "$(CCTYPE)" == "BORLAND"
1629 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1631 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1633 .IF "$(CCTYPE)" == "GCC"
1634 .IF "$(GCC_4XX)" == "define"
1635 $(XCOPY) $(GCCHELPERDLL) ..\t\$(NULL)
1639 test : $(RIGHTMAKE) test-prep
1640 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1642 test-reonly : reonly utils
1643 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1644 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1645 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1647 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \
1651 cd .. && regen.pl && cd win32
1653 test-notty : test-prep
1654 set PERL_SKIP_TTY_TEST=1 && \
1655 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1657 _test : $(RIGHTMAKE)
1658 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1659 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1660 .IF "$(CCTYPE)" == "BORLAND"
1661 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1663 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1665 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1668 -@erase miniperlmain$(o)
1670 -@erase perlglob$(o)
1671 -@erase perlmain$(o)
1672 -@erase perlmainst$(o)
1675 -@erase /f ..\git_version.h
1679 -@erase $(PERLEXESTATIC)
1680 -@erase $(PERLSTATICLIB)
1683 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
1684 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1685 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1686 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1687 -@erase $(UNIDATAFILES)
1688 -@erase $(WIN32_OBJ)
1691 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1692 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1693 -@erase ..\x2p\*.exe ..\x2p\*.bat
1697 -@erase Extensions_static
1701 clean : Extensions_clean _clean
1703 realclean : Extensions_realclean _clean
1705 # Handy way to run perlbug -ok without having to install and run the
1706 # installed perlbug. We don't re-run the tests here - we trust the user.
1707 # Please *don't* use this unless all tests pass.
1708 # If you want to report test failures, use "dmake nok" instead.
1710 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1713 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1716 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1719 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok