2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 thro 6.0
6 # Mingw32 with gcc-2.95.2 or better **experimental**
8 # This is set up to build a perl.exe that runs off a shared library
9 # (perl57.dll). Also makes individual DLLs for the XS extensions.
13 ## Make sure you read README.win32 *before* you mess with anything here!
17 ## Build configuration. Edit the values below to suit your needs.
21 # Set these to wherever you want "dmake install" to put your
25 INST_TOP *= $(INST_DRV)\perl
28 # Comment this out if you DON'T want your perl installation to be versioned.
29 # This means that the new installation will overwrite any files from the
30 # old installation at the same INST_TOP location. Leaving it enabled is
31 # the safest route, as perl adds the extra version directory to all the
32 # locations it installs files to. If you disable it, an alternative
33 # versioned installation can be obtained by setting INST_TOP above to a
34 # path that includes an arbitrary version string.
39 # Comment this out if you DON'T want your perl installation to have
40 # architecture specific components. This means that architecture-
41 # specific files will be installed along with the architecture-neutral
42 # files. Leaving it enabled is safer and more flexible, in case you
43 # want to build multiple flavors of perl and install them together in
44 # the same location. Commenting it out gives you a simpler
45 # installation that is easier to understand for beginners.
47 INST_ARCH *= \$(ARCHNAME)
50 # uncomment to enable multiple interpreters. This is need for fork()
56 # Beginnings of interpreter cloning/threads; still very incomplete.
57 # This should be enabled to get the fork() emulation. This needs
60 USE_ITHREADS *= define
63 # uncomment to enable the implicit "host" layer for all system calls
64 # made by perl. This needs USE_MULTI above. This is also needed to
70 # uncomment to enable the experimental PerlIO I/O subsystem.
74 # WARNING! This option is deprecated and will eventually go away (enable
75 # USE_ITHREADS instead).
77 # uncomment to enable threads-capabilities. This is incompatible with
78 # USE_ITHREADS, and is only here for people who may have come to rely
79 # on the experimental Thread support that was in 5.005.
81 #USE_5005THREADS *= define
84 # uncomment exactly one of the following
88 # Visual C++ > 2.x and < 6.x
92 # Borland 5.02 or later
94 # mingw32+gcc-2.95.2 or better
98 # uncomment this if your Borland compiler is older than v5.4.
101 # uncomment this if you want to use Borland's VCL as your CRT
105 # uncomment this if you are compiling under Windows 95/98 and command.com
106 # (not needed if you're running under 4DOS/NT 6.01 or later)
110 # uncomment next line if you want debug version of perl (big,slow)
111 # If not enabled, we automatically try to use maximum optimization
112 # with all compilers that are known to have a working optimizer.
117 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
118 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
119 # This currently requires VC 5.0 with Service Pack 3 or later.
120 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
121 # and follow the directions in the package to install.
123 # Not recommended if you have VC 6.x and you're not running Windows 9x.
125 #USE_PERLCRT *= define
128 # uncomment to enable linking with setargv.obj under the Visual C
129 # compiler. Setting this options enables perl to expand wildcards in
130 # arguments, but it may be harder to use alternate methods like
131 # File::DosGlob that are more powerful. This option is supported only with
134 #USE_SETARGV *= define
137 # if you have the source for des_fcrypt(), uncomment this and make sure the
138 # file exists (see README.win32). File should be located in the same
139 # directory as this file.
141 #CRYPT_SRC *= fcrypt.c
144 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
145 # library, uncomment this, and make sure the library exists (see README.win32)
146 # Specify the full pathname of the library.
148 #CRYPT_LIB *= fcrypt.lib
151 # set this if you wish to use perl's malloc
152 # WARNING: Turning this on/off WILL break binary compatibility with extensions
153 # you may have compiled with/without it. Be prepared to recompile all
154 # extensions if you change the default. Currently, this cannot be enabled
155 # if you ask for USE_IMP_SYS above.
157 #PERL_MALLOC *= define
160 # set the install locations of the compiler include/libraries
161 # Running VCVARS32.BAT is *required* when using Visual C.
162 # Some versions of Visual C don't define MSVCDIR in the environment,
163 # so you may have to set CCHOME explicitly (spaces in the path name should
166 .IF "$(CCTYPE)" == "BORLAND"
167 CCHOME *= C:\borland\bcc55
168 .ELIF "$(CCTYPE)" == "GCC"
173 CCINCDIR *= $(CCHOME)\include
174 CCLIBDIR *= $(CCHOME)\lib
177 # Additional compiler flags can be specified here.
181 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
182 # for old symbols by default, at the expense of extreme pollution. You most
183 # probably just want to build modules that won't compile with
184 # perl Makefile.PL POLLUTE=1
185 # instead of enabling this. Please report such modules to the respective
188 #BUILDOPT += -DPERL_POLLUTE
191 # This should normally be disabled. Enabling it will disable the File::Glob
192 # implementation of CORE::glob.
194 #BUILDOPT += -DPERL_EXTERNAL_GLOB
197 # This should normally be disabled. Enabling it causes perl to read scripts
198 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
199 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
202 # specify semicolon-separated list of extra directories that modules will
203 # look for libraries (spaces in path names need not be quoted)
208 # set this to point to cmd.exe (only needed if you use some
209 # alternate shell that doesn't grok cmd.exe style commands)
211 #SHELL *= g:\winnt\system32\cmd.exe
214 # set this to your email address (perl will guess a value from
215 # from your loginname and your hostname, which may not be right)
220 ## Build configuration ends.
223 ##################### CHANGE THESE ONLY IF YOU MUST #####################
225 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
229 CRYPT_FLAG = -DHAVE_DES_FCRYPT
234 USE_5005THREADS *= undef
236 .IF "$(USE_5005THREADS)" == "define"
237 USE_ITHREADS != undef
240 .IF "$(USE_IMP_SYS)" == "define"
245 USE_ITHREADS *= undef
250 .IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
254 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
256 USE_5005THREADS != undef
259 .IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
260 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
263 .IF "$(USE_IMP_SYS)" != "undef"
264 BUILDOPT += -DPERL_IMPLICIT_SYS
267 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
269 PROCESSOR_ARCHITECTURE *= x86
271 .IF "$(USE_5005THREADS)" == "define"
272 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
273 .ELIF "$(USE_MULTI)" == "define"
274 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
276 .IF "$(USE_PERLIO)" == "define"
277 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
279 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
281 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
284 .IF "$(USE_ITHREADS)" == "define"
285 ARCHNAME !:= $(ARCHNAME)-thread
288 # Visual Studio 98 specific
289 .IF "$(CCTYPE)" == "MSVC60"
291 # VC 6.0 can load the socket dll on demand. Makes the test suite
292 # run in about 10% less time.
293 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
295 .IF "$(CFG)" == "Debug"
297 # VC 6.0 seems capable of compiling perl correctly with optimizations
298 # enabled. Anything earlier fails tests.
303 ARCHDIR = ..\lib\$(ARCHNAME)
304 COREDIR = ..\lib\CORE
305 AUTODIR = ..\lib\auto
309 EXTUTILSDIR = $(LIBDIR)\ExtUtils
312 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
313 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
314 INST_LIB = $(INST_TOP)$(INST_VER)\lib
315 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
316 INST_COREDIR = $(INST_ARCHLIB)\CORE
317 INST_POD = $(INST_LIB)\pod
318 INST_HTML = $(INST_TOP)$(INST_VER)\html
321 # Programs to compile, build .lib files and link
326 .IF "$(CCTYPE)" == "BORLAND"
329 .IF "$(BCCOLD)" != "define"
341 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
342 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
343 DEFINES = -DWIN32 $(CRYPT_FLAG)
344 LOCDEFS = -DPERLDLL -DPERL_CORE
349 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
351 .IF "$(CFG)" == "Debug"
352 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
355 OPTIMIZE = -O2 -D_RTLDLL
359 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
360 $(PCHFLAGS) $(OPTIMIZE)
361 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
365 .IF "$(BCCOLD)" != "define"
367 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
369 .IF "$(BCCVCL)" == "define"
370 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
371 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
375 .ELIF "$(CCTYPE)" == "GCC"
391 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
392 DEFINES = -DWIN32 $(CRYPT_FLAG)
393 LOCDEFS = -DPERLDLL -DPERL_CORE
400 LIBFILES = $(CRYPT_LIB) $(LIBC) \
401 -lmoldname -lkernel32 -luser32 -lgdi32 \
402 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
403 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
404 -lwinmm -lversion -lodbc32
406 .IF "$(CFG)" == "Debug"
407 OPTIMIZE = -g -O2 -DDEBUGGING
414 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
415 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
420 # NOTE: we assume that GCC uses MSVCRT.DLL
421 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
427 LIB32 = $(LINK32) -lib
434 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
435 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
436 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
437 LOCDEFS = -DPERLDLL -DPERL_CORE
441 .IF "$(USE_PERLCRT)" != "define"
450 .IF "$(CFG)" == "Debug"
451 .IF "$(CCTYPE)" == "MSVC20"
452 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
453 LINK_DBG = -debug -pdb:none
455 # -Zi requires .pdb file(s)
456 #OPTIMIZE = -Od -MD -Zi -DDEBUGGING
458 OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING
459 LINK_DBG = -debug -debugtype:both -pdb:none
462 .IF "$(CFG)" == "Optimize"
463 # -O1 yields smaller code, which turns out to be faster than -O2
464 #OPTIMIZE = -O2 -MD -DNDEBUG
465 OPTIMIZE = -O1 -MD -DNDEBUG
467 OPTIMIZE = -Od -MD -DNDEBUG
472 LIBBASEFILES = $(CRYPT_LIB) \
473 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
474 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
475 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
476 version.lib odbc32.lib odbccp32.lib
478 # we add LIBC here, since we may be using PerlCRT.dll
479 LIBFILES = $(LIBBASEFILES) $(LIBC)
481 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
482 $(PCHFLAGS) $(OPTIMIZE)
483 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
484 -libpath:"$(INST_COREDIR)" \
485 -machine:$(PROCESSOR_ARCHITECTURE)
490 .IF "$(USE_PERLCRT)" != "define"
491 BUILDOPT += -DPERL_MSVCRT_READFIX
496 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
498 # used to allow local linking flags that are not propogated into Config.pm,
502 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
504 #################### do not edit below this line #######################
505 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
517 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
520 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
523 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
529 .IF "$(CCTYPE)" == "BORLAND"
530 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
531 $(IMPLIB) $(*B).lib $@
532 .ELIF "$(CCTYPE)" == "GCC"
533 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
534 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
536 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
537 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
545 MINIPERL = ..\miniperl.exe
547 PERLEXE = ..\perl.exe
548 WPERLEXE = ..\wperl.exe
549 GLOBEXE = ..\perlglob.exe
550 CONFIGPM = ..\lib\Config.pm
551 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
554 # Nominate a target which causes extensions to be re-built
555 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
556 # on and really only the interface - i.e. the .def file used to export symbols
558 PERLDEP = perldll.def
561 PL2BAT = bin\pl2bat.pl
562 GLOBBAT = bin\perlglob.bat
586 ..\lib\ExtUtils\xsubpp \
593 .IF "$(CCTYPE)" == "BORLAND"
595 CFGSH_TMPL = config.bc
596 CFGH_TMPL = config_H.bc
598 .ELIF "$(CCTYPE)" == "GCC"
600 CFGSH_TMPL = config.gc
601 CFGH_TMPL = config_H.gc
602 PERLIMPLIB = ..\libperl57$(a)
606 CFGSH_TMPL = config.vc
607 CFGH_TMPL = config_H.vc
611 # makedef.pl must be updated if this changes, and this should normally
612 # only change when there is an incompatible revision of the public API.
613 # XXX so why did we change it from perl56 to perl57?
614 PERLIMPLIB *= ..\perl57$(a)
615 PERLDLL = ..\perl57.dll
617 XCOPY = xcopy /f /r /i /d
618 RCOPY = xcopy /f /r /i /e /d
622 # filenames given to xsubpp must have forward slashes (since it puts
623 # full pathnames in #line strings)
624 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
662 EXTRACORE_SRC += perllib.c
664 .IF "$(PERL_MALLOC)" == "define"
665 EXTRACORE_SRC += ..\malloc.c
668 EXTRACORE_SRC += ..\perlio.c
675 .IF "$(USE_PERLIO)" == "define"
676 WIN32_SRC += .\win32io.c
679 .IF "$(CRYPT_SRC)" != ""
680 WIN32_SRC += .\$(CRYPT_SRC)
683 DLL_SRC = $(DYNALOADER).c
729 .\include\sys\socket.h \
732 CORE_H = $(CORE_NOCFG_H) .\config.h
734 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
735 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
736 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
737 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
738 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
739 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
740 DLL_OBJ = $(DLL_SRC:db:+$(o))
741 X2P_OBJ = $(X2P_SRC:db:+$(o))
743 PERLDLL_OBJ = $(CORE_OBJ)
744 PERLEXE_OBJ = perlmain$(o)
746 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
748 .IF "$(USE_SETARGV)" != ""
749 SETARGV_OBJ = setargv$(o)
752 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
753 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
754 Sys/Hostname Storable Filter/Util/Call Encode \
755 Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes \
757 STATIC_EXT = DynaLoader
760 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
762 POD2HTML = $(PODDIR)\pod2html
763 POD2MAN = $(PODDIR)\pod2man
764 POD2LATEX = $(PODDIR)\pod2latex
765 POD2TEXT = $(PODDIR)\pod2text
767 # vars must be separated by "\t+~\t+", since we're using the tempfile
768 # version of config_sh.pl (we were overflowing someone's buffer by
769 # trying to fit them all on the command line)
772 INST_DRV=$(INST_DRV) ~ \
773 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
774 INST_VER=$(INST_VER:s/\/\\/) ~ \
775 INST_ARCH=$(INST_ARCH) ~ \
776 archname=$(ARCHNAME) ~ \
779 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
780 cf_email=$(EMAIL) ~ \
781 d_crypt=$(D_CRYPT) ~ \
782 d_mymalloc=$(PERL_MALLOC) ~ \
783 libs=$(LIBFILES:f) ~ \
784 incpath=$(CCINCDIR:s/\/\\/) ~ \
785 libperl=$(PERLIMPLIB:f) ~ \
786 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
789 _o=$(o) obj_ext=$(o) ~ \
790 _a=$(a) lib_ext=$(a) ~ \
791 static_ext=$(STATIC_EXT) ~ \
792 use5005threads=$(USE_5005THREADS) ~ \
793 useithreads=$(USE_ITHREADS) ~ \
794 usethreads=$(USE_5005THREADS) ~ \
795 usemultiplicity=$(USE_MULTI) ~ \
796 useperlio=$(USE_PERLIO) ~ \
797 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
801 # set up targets varying between Win95 and WinNT builds
804 .IF "$(IS_WIN95)" == "define"
806 RIGHTMAKE = __switch_makefiles
817 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
818 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
821 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
823 #----------------------------------------------------------------
825 #-------------------- BEGIN Win95 SPECIFIC ----------------------
827 # this target is a jump-off point for Win95
828 # 1. it switches to the Win95-specific makefile if it exists
829 # (__do_switch_makefiles)
830 # 2. it prints a message when the Win95-specific one finishes (__done)
831 # 3. it then kills this makefile by trying to make __no_such_target
833 __switch_makefiles: __do_switch_makefiles __done __no_such_target
835 __do_switch_makefiles:
836 .IF "$(NOTFIRST)" != "true"
837 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
842 .IF "$(NOTFIRST)" != "true"
844 @echo Build process complete. Ignore any errors after this message.
845 @echo Run "dmake test" to test and "dmake install" to install
848 # dummy targets for Win95-specific makefile
858 # This target is used to generate the new makefile (.\makefile.95) for Win95
860 .\makefile.95: .\makefile.mk
861 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
863 #--------------------- END Win95 SPECIFIC ---------------------
865 # a blank target for when builds don't need to do certain things
866 # this target added for Win95 port but used to keep the WinNT port able to
871 $(GLOBEXE) : perlglob$(o)
872 .IF "$(CCTYPE)" == "BORLAND"
873 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
874 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
875 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
876 .ELIF "$(CCTYPE)" == "GCC"
877 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
879 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
880 perlglob$(o) setargv$(o)
883 perlglob$(o) : perlglob.c
885 config.w32 : $(CFGSH_TMPL)
886 copy $(CFGSH_TMPL) config.w32
888 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
890 copy $(CFGH_TMPL) config.h
892 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
893 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
894 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
896 # this target is for when changes to the main config.sh happen
897 # edit config.{b,v,g}c and make this target once for each supported
898 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
900 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
901 $(CFGSH_TMPL) > ..\config.sh
902 -cd .. && del /f perl.exe
903 -cd .. && del /f perl*.dll
904 cd .. && perl configpm
907 -perl config_h.PL "INST_VER=$(INST_VER)"
908 rename config.h $(CFGH_TMPL)
910 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
911 cd .. && miniperl configpm
912 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
913 $(XCOPY) ..\*.h $(COREDIR)\*.*
914 $(XCOPY) *.h $(COREDIR)\*.*
915 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
916 $(RCOPY) include $(COREDIR)\*.*
917 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
918 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
920 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
921 .IF "$(CCTYPE)" == "BORLAND"
922 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
923 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
924 .ELIF "$(CCTYPE)" == "GCC"
925 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
926 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
928 $(LINK32) -subsystem:console -out:$@ \
929 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
933 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
935 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
936 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
938 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
939 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
941 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
942 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
943 # unless the .IF is true), so instead we use a .ELSE with the default.
944 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
946 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
947 .IF "$(USE_IMP_SYS)" == "define"
948 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
950 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
953 # 1. we don't want to rebuild miniperl.exe when config.h changes
954 # 2. we don't want to rebuild miniperl.exe with non-default config.h
955 $(MINI_OBJ) : $(CORE_NOCFG_H)
957 $(WIN32_OBJ) : $(CORE_H)
958 $(CORE_OBJ) : $(CORE_H)
959 $(DLL_OBJ) : $(CORE_H)
960 $(X2P_OBJ) : $(CORE_H)
962 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
963 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
964 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
966 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
967 .IF "$(CCTYPE)" == "BORLAND"
968 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
969 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
974 .ELIF "$(CCTYPE)" == "GCC"
975 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
976 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
977 dlltool --output-lib $(PERLIMPLIB) \
978 --dllname $(PERLDLL:b).dll \
980 --base-file perl.base \
981 --output-exp perl.exp
982 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
983 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
986 $(LINK32) -dll -def:perldll.def -out:$@ \
987 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
988 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
990 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
992 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
993 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
995 ..\x2p\a2p$(o) : ..\x2p\a2p.c
996 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
998 ..\x2p\hash$(o) : ..\x2p\hash.c
999 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1001 ..\x2p\str$(o) : ..\x2p\str.c
1002 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1004 ..\x2p\util$(o) : ..\x2p\util.c
1005 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1007 ..\x2p\walk$(o) : ..\x2p\walk.c
1008 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1010 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1011 $(MINIPERL) ..\x2p\find2perl.PL
1012 $(MINIPERL) ..\x2p\s2p.PL
1013 .IF "$(CCTYPE)" == "BORLAND"
1014 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1015 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1016 .ELIF "$(CCTYPE)" == "GCC"
1017 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1018 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1020 $(LINK32) -subsystem:console -out:$@ \
1021 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1024 perlmain.c : runperl.c
1025 copy runperl.c perlmain.c
1027 perlmain$(o) : perlmain.c
1028 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1030 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1031 .IF "$(CCTYPE)" == "BORLAND"
1032 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1033 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1035 $(PERLIMPLIB) $(LIBFILES)\n)
1036 .ELIF "$(CCTYPE)" == "GCC"
1037 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1038 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1040 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1041 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1043 copy $(PERLEXE) $(WPERLEXE)
1044 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1045 copy splittree.pl ..
1046 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1048 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1049 if not exist $(AUTODIR) mkdir $(AUTODIR)
1050 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1051 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1052 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1053 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1054 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1055 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1057 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1058 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1060 #----------------------------------------------------------------------------------
1061 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1062 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1065 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1067 #----------------------------------------------------------------------------------
1071 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1072 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1073 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1075 utils: $(PERLEXE) $(X2P)
1076 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1077 copy ..\README.aix ..\pod\perlaix.pod
1078 copy ..\README.amiga ..\pod\perlamiga.pod
1079 copy ..\README.apollo ..\pod\perlapollo.pod
1080 copy ..\README.beos ..\pod\perlbeos.pod
1081 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1082 copy ..\README.ce ..\pod\perlce.pod
1083 copy ..\README.cygwin ..\pod\perlcygwin.pod
1084 copy ..\README.dgux ..\pod\perldgux.pod
1085 copy ..\README.dos ..\pod\perldos.pod
1086 copy ..\README.epoc ..\pod\perlepoc.pod
1087 copy ..\README.hpux ..\pod\perlhpux.pod
1088 copy ..\README.hurd ..\pod\perlhurd.pod
1089 copy ..\README.machten ..\pod\perlmachten.pod
1090 copy ..\README.macos ..\pod\perlmacos.pod
1091 copy ..\README.mint ..\pod\perlmint.pod
1092 copy ..\README.mpeix ..\pod\perlmpeix.pod
1093 copy ..\README.netware ..\pod\perlnetware.pod
1094 copy ..\README.os2 ..\pod\perlos2.pod
1095 copy ..\README.os390 ..\pod\perlos390.pod
1096 copy ..\README.plan9 ..\pod\perlplan9.pod
1097 copy ..\README.qnx ..\pod\perlqnx.pod
1098 copy ..\README.solaris ..\pod\perlsolaris.pod
1099 copy ..\README.tru64 ..\pod\perltru64.pod
1100 copy ..\README.uts ..\pod\perluts.pod
1101 copy ..\README.vmesa ..\pod\perlvmesa.pod
1102 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1103 copy ..\README.vos ..\pod\perlvos.pod
1104 copy ..\README.win32 ..\pod\perlwin32.pod
1105 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1106 cd ..\lib && $(PERLEXE) lib_pm.PL
1107 $(PERLEXE) $(PL2BAT) $(UTILS)
1110 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1111 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1113 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1114 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1115 -del /f $(LIBDIR)\XSLoader.pm
1116 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1117 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1118 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1119 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1120 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1121 -del /f $(LIBDIR)\PerlIO\Scalar.pm
1122 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1123 -del /f $(LIBDIR)\File\Glob.pm
1124 -del /f $(LIBDIR)\Storable.pm
1125 -del /f $(LIBDIR)\Filter\Util\Call.pm
1126 -del /f $(LIBDIR)\Digest\MD5.pm
1127 -del /f $(LIBDIR)\MIME\Base64.pm
1128 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1129 -del /f $(LIBDIR)\Time\HiRes.pm
1130 -del /f $(LIBDIR)\List\Util.pm
1131 -del /f $(LIBDIR)\Scalar\Util.pm
1132 -del /f $(LIBDIR)\Unicode\Normalize.pm
1133 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
1134 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
1135 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
1136 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
1137 -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
1138 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
1139 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
1140 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
1141 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
1142 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
1143 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1144 perlaix.pod perlamiga.pod perlapollo.pod \
1145 perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1146 perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \
1147 perlmachten.pod perlmint.pod \
1148 perlmacos.pod perlmpeix.pod perlnetware.pod \
1149 perlos2.pod perlos390.pod \
1150 perlplan9.pod perlqnx.pod \
1151 perlsolaris.pod perltru64.pod perluts.pod \
1152 perlvmesa.pod perlvms.pod perlvos.pod \
1153 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1154 podchecker podselect
1155 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
1156 perlivp dprofpp *.bat
1157 -cd ..\x2p && del /f find2perl s2p *.bat
1158 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1161 -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
1163 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
1164 -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
1166 install : all installbare installhtml
1168 installbare : $(RIGHTMAKE) utils
1169 $(PERLEXE) ..\installperl
1170 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1171 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1172 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1175 $(RCOPY) html\*.* $(INST_HTML)\*.*
1177 inst_lib : $(CONFIGPM)
1178 copy splittree.pl ..
1179 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1180 $(RCOPY) ..\lib $(INST_LIB)\*.*
1182 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1183 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1184 .IF "$(CCTYPE)" == "BORLAND"
1185 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1187 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1192 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1194 test-prep : all utils
1195 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1196 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1197 .IF "$(CCTYPE)" == "BORLAND"
1198 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1200 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1203 test : $(RIGHTMAKE) test-prep
1204 cd ..\t && $(PERLEXE) -I..\lib harness
1206 test-notty : test-prep
1207 set PERL_SKIP_TTY_TEST=1 && \
1208 cd ..\t && $(PERLEXE) -I.\lib harness
1210 test-wide : test-prep
1211 set HARNESS_PERL_SWITCHES=-C && \
1212 cd ..\t && $(PERLEXE) -I..\lib harness
1214 test-wide-notty : test-prep
1215 set PERL_SKIP_TTY_TEST=1 && \
1216 set HARNESS_PERL_SWITCHES=-C && \
1217 cd ..\t && $(PERLEXE) -I..\lib harness
1219 _test : $(RIGHTMAKE)
1220 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1221 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1222 .IF "$(CCTYPE)" == "BORLAND"
1223 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1225 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1227 cd ..\t && $(PERLEXE) -I..\lib harness
1229 clean : Extensions_clean
1230 -@erase miniperlmain$(o)
1232 -@erase perlglob$(o)
1233 -@erase perlmain$(o)
1241 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
1242 -@erase $(WIN32_OBJ)
1245 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1246 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1247 -@erase ..\x2p\*.exe ..\x2p\*.bat
1251 # Handy way to run perlbug -ok without having to install and run the
1252 # installed perlbug. We don't re-run the tests here - we trust the user.
1253 # Please *don't* use this unless all tests pass.
1254 # If you want to report test failures, use "dmake nok" instead.
1256 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1259 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1262 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1265 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok