2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # Comment this out if you don't want to enable large file support for
80 # some reason. Should normally only be changed to maintain compatibility
81 # with an older release of perl.
82 USE_LARGE_FILES *= define
85 # uncomment exactly one of the following
89 # Visual C++ > 2.x and < 6.x
93 # Borland 5.02 or later
95 # MinGW with gcc-2.95.2 or later
99 # uncomment this if your Borland compiler is older than v5.4.
102 # uncomment this if you want to use Borland's VCL as your CRT
106 # uncomment this if you are compiling under Windows 95/98 and command.com
107 # (not needed if you're running under 4DOS/NT 6.01 or later)
111 # uncomment next line if you want debug version of perl (big,slow)
112 # If not enabled, we automatically try to use maximum optimization
113 # with all compilers that are known to have a working optimizer.
118 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
119 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
120 # This currently requires VC 5.0 with Service Pack 3 or later.
121 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
122 # and follow the directions in the package to install.
124 # Not recommended if you have VC 6.x and you're not running Windows 9x.
126 #USE_PERLCRT *= define
129 # uncomment to enable linking with setargv.obj under the Visual C
130 # compiler. Setting this options enables perl to expand wildcards in
131 # arguments, but it may be harder to use alternate methods like
132 # File::DosGlob that are more powerful. This option is supported only with
135 #USE_SETARGV *= define
138 # if you want to have the crypt() builtin function implemented, leave this or
139 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
140 # version of des_fcrypt().
142 CRYPT_SRC *= fcrypt.c
145 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
146 # library, uncomment this, and make sure the library exists (see README.win32)
147 # Specify the full pathname of the library.
149 #CRYPT_LIB *= fcrypt.lib
152 # set this if you wish to use perl's malloc
153 # WARNING: Turning this on/off WILL break binary compatibility with extensions
154 # you may have compiled with/without it. Be prepared to recompile all
155 # extensions if you change the default. Currently, this cannot be enabled
156 # if you ask for USE_IMP_SYS above.
158 PERL_MALLOC *= define
161 # set this to enable debugging mstats
162 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
163 # be enabled without PERL_MALLOC as well.
165 DEBUG_MSTATS = define
168 # set the install locations of the compiler include/libraries
169 # Running VCVARS32.BAT is *required* when using Visual C.
170 # Some versions of Visual C don't define MSVCDIR in the environment,
171 # so you may have to set CCHOME explicitly (spaces in the path name should
174 .IF "$(CCTYPE)" == "BORLAND"
175 CCHOME *= C:\borland\bcc55
176 .ELIF "$(CCTYPE)" == "GCC"
181 CCINCDIR *= $(CCHOME)\include
182 CCLIBDIR *= $(CCHOME)\lib
185 # Additional compiler flags can be specified here.
189 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
190 # for old symbols by default, at the expense of extreme pollution. You most
191 # probably just want to build modules that won't compile with
192 # perl Makefile.PL POLLUTE=1
193 # instead of enabling this. Please report such modules to the respective
196 #BUILDOPT += -DPERL_POLLUTE
199 # This should normally be disabled. Enabling it will disable the File::Glob
200 # implementation of CORE::glob.
202 #BUILDOPT += -DPERL_EXTERNAL_GLOB
205 # This should normally be disabled. Enabling it causes perl to read scripts
206 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
207 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
210 # specify semicolon-separated list of extra directories that modules will
211 # look for libraries (spaces in path names need not be quoted)
216 # set this to point to cmd.exe (only needed if you use some
217 # alternate shell that doesn't grok cmd.exe style commands)
219 #SHELL *= g:\winnt\system32\cmd.exe
222 # set this to your email address (perl will guess a value from
223 # from your loginname and your hostname, which may not be right)
228 ## Build configuration ends.
231 ##################### CHANGE THESE ONLY IF YOU MUST #####################
233 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
237 CRYPT_FLAG = -DHAVE_DES_FCRYPT
243 USE_ITHREADS *= undef
246 USE_LARGE_FILES *= undef
249 .IF "$(PERL_MALLOC)" == "undef"
254 .IF "$(DEBUG_MSTATS)" == "undef"
258 .IF "$(DEBUG_MSTATS)" == "define"
259 BUILDOPT += -DPERL_DEBUGGING_MSTATS
262 .IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
266 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
270 .IF "$(USE_MULTI)" != "undef"
271 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
274 .IF "$(USE_IMP_SYS)" != "undef"
275 BUILDOPT += -DPERL_IMPLICIT_SYS
278 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
280 PROCESSOR_ARCHITECTURE *= x86
283 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
284 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
286 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
293 .IF "$(USE_MULTI)" == "define"
294 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
296 .IF "$(USE_PERLIO)" == "define"
297 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
299 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
301 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
304 .IF "$(USE_ITHREADS)" == "define"
305 ARCHNAME !:= $(ARCHNAME)-thread
308 # Visual Studio 98 specific
309 .IF "$(CCTYPE)" == "MSVC60"
311 # VC 6.0 can load the socket dll on demand. Makes the test suite
312 # run in about 10% less time.
313 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
315 .IF "$(CFG)" == "Debug"
317 # VC 6.0 seems capable of compiling perl correctly with optimizations
318 # enabled. Anything earlier fails tests.
323 ARCHDIR = ..\lib\$(ARCHNAME)
324 COREDIR = ..\lib\CORE
325 AUTODIR = ..\lib\auto
329 EXTUTILSDIR = $(LIBDIR)\ExtUtils
332 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
333 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
334 INST_LIB = $(INST_TOP)$(INST_VER)\lib
335 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
336 INST_COREDIR = $(INST_ARCHLIB)\CORE
337 INST_POD = $(INST_LIB)\pod
338 INST_HTML = $(INST_TOP)$(INST_VER)\html
341 # Programs to compile, build .lib files and link
346 .IF "$(CCTYPE)" == "BORLAND"
349 .IF "$(BCCOLD)" != "define"
361 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
362 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
363 DEFINES = -DWIN32 $(CRYPT_FLAG)
364 LOCDEFS = -DPERLDLL -DPERL_CORE
369 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
371 .IF "$(CFG)" == "Debug"
372 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
375 OPTIMIZE = -O2 -D_RTLDLL
379 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
380 $(PCHFLAGS) $(OPTIMIZE)
381 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
385 .IF "$(BCCOLD)" != "define"
387 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
389 .IF "$(BCCVCL)" == "define"
390 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
391 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
395 .ELIF "$(CCTYPE)" == "GCC"
411 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
412 DEFINES = -DWIN32 $(CRYPT_FLAG)
413 LOCDEFS = -DPERLDLL -DPERL_CORE
420 LIBFILES = $(CRYPT_LIB) $(LIBC) \
421 -lmoldname -lkernel32 -luser32 -lgdi32 \
422 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
423 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
424 -lwinmm -lversion -lodbc32
426 .IF "$(CFG)" == "Debug"
427 OPTIMIZE = -g -O2 -DDEBUGGING
434 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
435 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
440 # NOTE: we assume that GCC uses MSVCRT.DLL
441 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
447 LIB32 = $(LINK32) -lib
454 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
455 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
456 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
457 LOCDEFS = -DPERLDLL -DPERL_CORE
461 .IF "$(USE_PERLCRT)" != "define"
467 .IF "$(CFG)" == "Debug"
468 .IF "$(CCTYPE)" == "MSVC20"
469 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
471 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
475 OPTIMIZE = -MD -Zi -DNDEBUG
476 # we enable debug symbols in release builds also
477 LINK_DBG = -debug -opt:ref,icf
478 # you may want to enable this if you want COFF symbols in the executables
479 # in addition to the PDB symbols. The default Dr. Watson that ships with
480 # Windows can use the the former but not latter. The free WinDbg can be
481 # installed to get better stack traces from just the PDB symbols, so we
482 # avoid the bloat of COFF symbols by default.
483 #LINK_DBG = $(LINK_DBG) -debugtype:both
484 .IF "$(WIN64)" == "define"
485 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
489 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
495 .IF "$(WIN64)" == "define"
496 DEFINES += -DWIN64 -DCONSERVATIVE
497 OPTIMIZE += -Wp64 -Op
500 .IF "$(USE_PERLCRT)" != "define"
501 BUILDOPT += -DPERL_MSVCRT_READFIX
504 LIBBASEFILES = $(CRYPT_LIB) \
505 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
506 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
507 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
510 # win64 doesn't have some libs
511 .IF "$(WIN64)" != "define"
512 LIBBASEFILES += odbc32.lib odbccp32.lib
515 # we add LIBC here, since we may be using PerlCRT.dll
516 LIBFILES = $(LIBBASEFILES) $(LIBC)
518 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
519 $(PCHFLAGS) $(OPTIMIZE)
520 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
521 -libpath:"$(INST_COREDIR)" \
522 -machine:$(PROCESSOR_ARCHITECTURE)
529 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
531 # used to allow local linking flags that are not propogated into Config.pm,
535 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
537 #################### do not edit below this line #######################
538 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
550 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
553 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
556 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
562 .IF "$(CCTYPE)" == "BORLAND"
563 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
564 $(IMPLIB) $(*B).lib $@
565 .ELIF "$(CCTYPE)" == "GCC"
566 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
567 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
569 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
570 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
574 .IF "$(CCTYPE)" == "GCC"
575 $(RSC) --use-temp-file -i $< -o $@
582 MINIPERL = ..\miniperl.exe
584 PERLEXE = ..\perl.exe
585 WPERLEXE = ..\wperl.exe
586 GLOBEXE = ..\perlglob.exe
587 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
588 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
591 # Unicode data files generated by mktables
592 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
593 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
594 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
595 ..\lib\unicore\PVA.pl
597 # Directories of Unicode data files generated by mktables
598 UNIDATADIR1 = ..\lib\unicore\To
599 UNIDATADIR2 = ..\lib\unicore\lib
601 PERLEXE_ICO = .\perlexe.ico
602 PERLEXE_RES = .\perlexe.res
605 # Nominate a target which causes extensions to be re-built
606 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
607 # on and really only the interface - i.e. the .def file used to export symbols
609 PERLDEP = perldll.def
612 PL2BAT = bin\pl2bat.pl
613 GLOBBAT = bin\perlglob.bat
651 .IF "$(CCTYPE)" == "BORLAND"
653 CFGSH_TMPL = config.bc
654 CFGH_TMPL = config_H.bc
656 .ELIF "$(CCTYPE)" == "GCC"
658 CFGSH_TMPL = config.gc
659 CFGH_TMPL = config_H.gc
660 PERLIMPLIB = ..\libperl59$(a)
664 .IF "$(WIN64)" == "define"
665 CFGSH_TMPL = config.vc64
666 CFGH_TMPL = config_H.vc64
668 CFGSH_TMPL = config.vc
669 CFGH_TMPL = config_H.vc
674 # makedef.pl must be updated if this changes, and this should normally
675 # only change when there is an incompatible revision of the public API.
676 PERLIMPLIB *= ..\perl59$(a)
677 PERLDLL = ..\perl59.dll
679 XCOPY = xcopy /f /r /i /d
680 RCOPY = xcopy /f /r /i /e /d
684 # filenames given to xsubpp must have forward slashes (since it puts
685 # full pathnames in #line strings)
686 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
725 EXTRACORE_SRC += perllib.c
727 .IF "$(PERL_MALLOC)" == "define"
728 EXTRACORE_SRC += ..\malloc.c
731 EXTRACORE_SRC += ..\perlio.c
738 # We need this for miniperl build unless we override canned
739 # config.h #define building mini\*
740 #.IF "$(USE_PERLIO)" == "define"
741 WIN32_SRC += .\win32io.c
744 .IF "$(CRYPT_SRC)" != ""
745 WIN32_SRC += .\$(CRYPT_SRC)
748 DLL_SRC = $(DYNALOADER).c
794 .\include\sys\socket.h \
797 CORE_H = $(CORE_NOCFG_H) .\config.h
799 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
800 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
801 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
802 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
803 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
804 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
805 DLL_OBJ = $(DLL_SRC:db:+$(o))
806 X2P_OBJ = $(X2P_SRC:db:+$(o))
808 PERLDLL_OBJ = $(CORE_OBJ)
809 PERLEXE_OBJ = perlmain$(o)
811 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
813 .IF "$(USE_SETARGV)" != ""
814 SETARGV_OBJ = setargv$(o)
817 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
818 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
819 Sys/Hostname Storable Filter/Util/Call Encode \
820 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
821 Unicode/Normalize Win32
825 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
827 POD2HTML = $(PODDIR)\pod2html
828 POD2MAN = $(PODDIR)\pod2man
829 POD2LATEX = $(PODDIR)\pod2latex
830 POD2TEXT = $(PODDIR)\pod2text
832 # vars must be separated by "\t+~\t+", since we're using the tempfile
833 # version of config_sh.pl (we were overflowing someone's buffer by
834 # trying to fit them all on the command line)
837 INST_DRV=$(INST_DRV) ~ \
838 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
839 INST_VER=$(INST_VER:s/\/\\/) ~ \
840 INST_ARCH=$(INST_ARCH) ~ \
841 archname=$(ARCHNAME) ~ \
844 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
845 cf_email=$(EMAIL) ~ \
846 d_crypt=$(D_CRYPT) ~ \
847 d_mymalloc=$(PERL_MALLOC) ~ \
848 libs=$(LIBFILES:f) ~ \
849 incpath=$(CCINCDIR:s/\/\\/) ~ \
850 libperl=$(PERLIMPLIB:f) ~ \
851 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
858 static_ext=$(STATIC_EXT) ~ \
859 usethreads=$(USE_ITHREADS) ~ \
860 useithreads=$(USE_ITHREADS) ~ \
861 usemultiplicity=$(USE_MULTI) ~ \
862 useperlio=$(USE_PERLIO) ~ \
863 uselargefiles=$(USE_LARGE_FILES) ~ \
864 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
868 # set up targets varying between Win95 and WinNT builds
871 .IF "$(IS_WIN95)" == "define"
873 RIGHTMAKE = __switch_makefiles
884 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
885 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
888 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
890 #----------------------------------------------------------------
892 #-------------------- BEGIN Win95 SPECIFIC ----------------------
894 # this target is a jump-off point for Win95
895 # 1. it switches to the Win95-specific makefile if it exists
896 # (__do_switch_makefiles)
897 # 2. it prints a message when the Win95-specific one finishes (__done)
898 # 3. it then kills this makefile by trying to make __no_such_target
900 __switch_makefiles: __do_switch_makefiles __done __no_such_target
902 __do_switch_makefiles:
903 .IF "$(NOTFIRST)" != "true"
904 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
909 .IF "$(NOTFIRST)" != "true"
911 @echo Build process complete. Ignore any errors after this message.
912 @echo Run "dmake test" to test and "dmake install" to install
915 # dummy targets for Win95-specific makefile
925 # This target is used to generate the new makefile (.\makefile.95) for Win95
927 .\makefile.95: .\makefile.mk
928 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
930 #--------------------- END Win95 SPECIFIC ---------------------
932 # a blank target for when builds don't need to do certain things
933 # this target added for Win95 port but used to keep the WinNT port able to
938 $(GLOBEXE) : perlglob$(o)
939 .IF "$(CCTYPE)" == "BORLAND"
940 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
941 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
942 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
943 .ELIF "$(CCTYPE)" == "GCC"
944 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
946 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
947 perlglob$(o) setargv$(o)
950 perlglob$(o) : perlglob.c
952 config.w32 : $(CFGSH_TMPL)
953 copy $(CFGSH_TMPL) config.w32
955 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
957 copy $(CFGH_TMPL) config.h
959 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
960 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
961 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
963 # this target is for when changes to the main config.sh happen
964 # edit config.{b,v,g}c and make this target once for each supported
965 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
967 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
968 $(CFGSH_TMPL) > ..\config.sh
969 -cd .. && del /f perl.exe
970 -cd .. && del /f perl*.dll
971 cd .. && perl configpm
974 -perl config_h.PL "INST_VER=$(INST_VER)"
975 rename config.h $(CFGH_TMPL)
977 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
978 cd .. && miniperl configpm
979 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
980 $(XCOPY) ..\*.h $(COREDIR)\*.*
981 $(XCOPY) *.h $(COREDIR)\*.*
982 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
983 $(RCOPY) include $(COREDIR)\*.*
984 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
985 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
987 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
988 .IF "$(CCTYPE)" == "BORLAND"
989 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
990 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
991 .ELIF "$(CCTYPE)" == "GCC"
992 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
993 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
995 $(LINK32) -subsystem:console -out:$@ \
996 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
1000 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1002 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1003 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1005 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1006 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1008 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1009 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1010 # unless the .IF is true), so instead we use a .ELSE with the default.
1011 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1013 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1014 .IF "$(USE_IMP_SYS)" == "define"
1015 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1017 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1020 # 1. we don't want to rebuild miniperl.exe when config.h changes
1021 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1022 $(MINI_OBJ) : $(CORE_NOCFG_H)
1024 $(WIN32_OBJ) : $(CORE_H)
1026 $(CORE_OBJ) : $(CORE_H)
1028 $(DLL_OBJ) : $(CORE_H)
1030 $(X2P_OBJ) : $(CORE_H)
1032 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1033 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1034 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1035 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1037 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1038 .IF "$(CCTYPE)" == "BORLAND"
1039 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1040 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1045 .ELIF "$(CCTYPE)" == "GCC"
1046 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1047 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) \
1048 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs|tr \\\\ /) \
1049 $(LIBFILES) $(LKPOST))
1050 dlltool --output-lib $(PERLIMPLIB) \
1051 --dllname $(PERLDLL:b).dll \
1053 --base-file perl.base \
1054 --output-exp perl.exp
1055 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1056 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) \
1057 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs|tr \\\\ /) \
1058 $(LIBFILES) perl.exp $(LKPOST))
1060 $(LINK32) -dll -def:perldll.def -out:$@ \
1061 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
1062 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1063 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1065 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1068 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1069 $(MINIPERL) makeico.pl > $@
1071 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1073 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1074 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1076 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1077 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1079 ..\x2p\hash$(o) : ..\x2p\hash.c
1080 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1082 ..\x2p\str$(o) : ..\x2p\str.c
1083 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1085 ..\x2p\util$(o) : ..\x2p\util.c
1086 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1088 ..\x2p\walk$(o) : ..\x2p\walk.c
1089 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1091 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1092 $(MINIPERL) ..\x2p\find2perl.PL
1093 $(MINIPERL) ..\x2p\s2p.PL
1094 .IF "$(CCTYPE)" == "BORLAND"
1095 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1096 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1097 .ELIF "$(CCTYPE)" == "GCC"
1098 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1099 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1101 $(LINK32) -subsystem:console -out:$@ \
1102 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1105 perlmain.c : runperl.c
1106 copy runperl.c perlmain.c
1108 perlmain$(o) : perlmain.c
1109 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1111 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1112 .IF "$(CCTYPE)" == "BORLAND"
1113 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1114 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1116 $(PERLIMPLIB) $(LIBFILES)\n)
1117 .ELIF "$(CCTYPE)" == "GCC"
1118 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1119 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1121 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1122 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1124 copy $(PERLEXE) $(WPERLEXE)
1125 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1126 copy splittree.pl ..
1127 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1129 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1130 if not exist $(AUTODIR) mkdir $(AUTODIR)
1131 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1132 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1133 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1134 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1135 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1136 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1138 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1139 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1141 #----------------------------------------------------------------------------------
1142 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1143 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1144 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1146 Extensions_static : buildext.pl
1147 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1148 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1150 # Note: The next two targets explicitly remove a "blibdirs.exists" file that
1151 # currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
1154 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1155 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1156 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
1158 Extensions_realclean :
1159 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1160 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1161 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
1163 #----------------------------------------------------------------------------------
1167 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1168 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1169 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1171 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1172 # so please check that script before making structural changes here
1173 utils: $(PERLEXE) $(X2P)
1174 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1175 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1176 copy ..\README.aix ..\pod\perlaix.pod
1177 copy ..\README.amiga ..\pod\perlamiga.pod
1178 copy ..\README.apollo ..\pod\perlapollo.pod
1179 copy ..\README.beos ..\pod\perlbeos.pod
1180 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1181 copy ..\README.ce ..\pod\perlce.pod
1182 copy ..\README.cn ..\pod\perlcn.pod
1183 copy ..\README.cygwin ..\pod\perlcygwin.pod
1184 copy ..\README.dgux ..\pod\perldgux.pod
1185 copy ..\README.dos ..\pod\perldos.pod
1186 copy ..\README.epoc ..\pod\perlepoc.pod
1187 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1188 copy ..\README.hpux ..\pod\perlhpux.pod
1189 copy ..\README.hurd ..\pod\perlhurd.pod
1190 copy ..\README.irix ..\pod\perlirix.pod
1191 copy ..\README.jp ..\pod\perljp.pod
1192 copy ..\README.ko ..\pod\perlko.pod
1193 copy ..\README.machten ..\pod\perlmachten.pod
1194 copy ..\README.macos ..\pod\perlmacos.pod
1195 copy ..\README.macosx ..\pod\perlmacosx.pod
1196 copy ..\README.mint ..\pod\perlmint.pod
1197 copy ..\README.mpeix ..\pod\perlmpeix.pod
1198 copy ..\README.netware ..\pod\perlnetware.pod
1199 copy ..\README.os2 ..\pod\perlos2.pod
1200 copy ..\README.os390 ..\pod\perlos390.pod
1201 copy ..\README.os400 ..\pod\perlos400.pod
1202 copy ..\README.plan9 ..\pod\perlplan9.pod
1203 copy ..\README.qnx ..\pod\perlqnx.pod
1204 copy ..\README.solaris ..\pod\perlsolaris.pod
1205 copy ..\README.tru64 ..\pod\perltru64.pod
1206 copy ..\README.tw ..\pod\perltw.pod
1207 copy ..\README.uts ..\pod\perluts.pod
1208 copy ..\README.vmesa ..\pod\perlvmesa.pod
1209 copy ..\README.vms ..\pod\perlvms.pod
1210 copy ..\README.vos ..\pod\perlvos.pod
1211 copy ..\README.win32 ..\pod\perlwin32.pod
1212 copy ..\pod\perl592delta.pod ..\pod\perldelta.pod
1213 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1214 cd ..\lib && $(PERLEXE) lib_pm.PL
1215 $(PERLEXE) $(PL2BAT) $(UTILS)
1217 # Note that the pod cleanup in this next section is parsed (and regenerated
1218 # by pod/buildtoc so please check that script before making changes here
1220 # the doubled rmdir calls are needed because older cmd shells
1221 # don't understand /q
1222 distclean: realclean
1223 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1224 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1226 -del /f $(DYNALOADER).c
1227 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1228 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1229 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1230 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1231 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1232 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1233 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1234 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1235 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1236 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1237 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1238 -del /f $(LIBDIR)\ByteLoader.pm
1239 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1240 -del /f $(LIBDIR)\Devel\PPPort.pm
1241 -del /f $(LIBDIR)\File\Glob.pm
1242 -del /f $(LIBDIR)\Storable.pm
1243 -del /f $(LIBDIR)\Digest\MD5.pm
1244 -del /f $(LIBDIR)\PerlIO\encoding.pm
1245 -del /f $(LIBDIR)\PerlIO\scalar.pm
1246 -del /f $(LIBDIR)\PerlIO\via.pm
1247 -del /f $(LIBDIR)\Sys\Hostname.pm
1248 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1249 -del /f $(LIBDIR)\threads\shared.pm
1250 -del /f $(LIBDIR)\Time\HiRes.pm
1251 -del /f $(LIBDIR)\Unicode\Normalize.pm
1252 -del /f $(LIBDIR)\Win32.pm
1253 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1254 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1255 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1256 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1257 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1258 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1259 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1260 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1261 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1262 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1263 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1264 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1265 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1266 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1267 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1268 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1269 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1270 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1271 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1272 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1273 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1274 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1275 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1276 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1277 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1278 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1279 perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
1280 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1282 pod2html pod2latex pod2man pod2text pod2usage \
1283 podchecker podselect
1284 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1285 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1286 xsubpp instmodsh prove
1287 -cd ..\x2p && del /f find2perl s2p psed *.bat
1288 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1292 -del /f $(PERLEXE_ICO) perl.base
1293 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1294 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1295 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1296 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1297 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1298 -if exist $(COREDIR) rmdir /s $(COREDIR)
1300 install : all installbare installhtml
1302 installbare : $(RIGHTMAKE) utils
1303 $(PERLEXE) ..\installperl
1304 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1305 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1306 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1307 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1308 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1311 $(RCOPY) html\*.* $(INST_HTML)\*.*
1313 inst_lib : $(CONFIGPM)
1314 copy splittree.pl ..
1315 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1316 $(RCOPY) ..\lib $(INST_LIB)\*.*
1318 # Move the rule for making $(UNIDATAFILES) into a separate target and leave the
1319 # actual rule here blank because dmake runs the rule here once for each of the
1320 # files listed in $(UNIDATAFILES)
1321 $(UNIDATAFILES) : make_unidatafiles
1323 make_unidatafiles : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1324 cd ..\lib\unicore && \
1325 ..\$(MINIPERL) -I.. mktables
1327 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1328 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1329 if exist ..\t\perl.exe del /f ..\t\perl.exe
1330 rename ..\t\miniperl.exe perl.exe
1331 .IF "$(CCTYPE)" == "BORLAND"
1332 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1334 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1338 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1340 test-prep : all utils
1341 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1342 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1343 .IF "$(CCTYPE)" == "BORLAND"
1344 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1346 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1349 test : $(RIGHTMAKE) test-prep
1350 cd ..\t && $(PERLEXE) -I..\lib harness
1352 test-notty : test-prep
1353 set PERL_SKIP_TTY_TEST=1 && \
1354 cd ..\t && $(PERLEXE) -I.\lib harness
1356 _test : $(RIGHTMAKE)
1357 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1358 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1359 .IF "$(CCTYPE)" == "BORLAND"
1360 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1362 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1364 cd ..\t && $(PERLEXE) -I..\lib harness
1366 # the doubled rmdir calls are needed because older cmd shells
1367 # don't understand /q
1369 -@erase miniperlmain$(o)
1371 -@erase perlglob$(o)
1372 -@erase perlmain$(o)
1380 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1381 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1382 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1383 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1384 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1385 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1386 -@erase $(UNIDATAFILES)
1387 -@erase $(WIN32_OBJ)
1390 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1391 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1392 -@erase ..\x2p\*.exe ..\x2p\*.bat
1396 clean : Extensions_clean _clean
1398 realclean : Extensions_realclean _clean
1400 # Handy way to run perlbug -ok without having to install and run the
1401 # installed perlbug. We don't re-run the tests here - we trust the user.
1402 # Please *don't* use this unless all tests pass.
1403 # If you want to report test failures, use "dmake nok" instead.
1405 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1408 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1411 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1414 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok