2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl58.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
57 # Beginnings of interpreter cloning/threads; still very incomplete.
58 # This should be enabled to get the fork() emulation. This needs
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above. This is also needed to
71 # uncomment to enable the experimental PerlIO I/O subsystem.
75 # WARNING! This option is deprecated and will eventually go away (enable
76 # USE_ITHREADS instead).
78 # uncomment to enable threads-capabilities. This is incompatible with
79 # USE_ITHREADS, and is only here for people who may have come to rely
80 # on the experimental Thread support that was in 5.005.
82 #USE_5005THREADS *= define
85 # uncomment exactly one of the following
89 # Visual C++ > 2.x and < 6.x
93 # Borland 5.02 or later
95 # mingw32+gcc-2.95.2 or better
99 # uncomment this if your Borland compiler is older than v5.4.
102 # uncomment this if you want to use Borland's VCL as your CRT
106 # uncomment this if you are compiling under Windows 95/98 and command.com
107 # (not needed if you're running under 4DOS/NT 6.01 or later)
111 # uncomment next line if you want debug version of perl (big,slow)
112 # If not enabled, we automatically try to use maximum optimization
113 # with all compilers that are known to have a working optimizer.
118 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
119 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
120 # This currently requires VC 5.0 with Service Pack 3 or later.
121 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
122 # and follow the directions in the package to install.
124 # Not recommended if you have VC 6.x and you're not running Windows 9x.
126 #USE_PERLCRT *= define
129 # uncomment to enable linking with setargv.obj under the Visual C
130 # compiler. Setting this options enables perl to expand wildcards in
131 # arguments, but it may be harder to use alternate methods like
132 # File::DosGlob that are more powerful. This option is supported only with
135 #USE_SETARGV *= define
138 # if you have the source for des_fcrypt(), uncomment this and make sure the
139 # file exists (see README.win32). File should be located in the same
140 # directory as this file.
142 #CRYPT_SRC *= fcrypt.c
145 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
146 # library, uncomment this, and make sure the library exists (see README.win32)
147 # Specify the full pathname of the library.
149 #CRYPT_LIB *= fcrypt.lib
152 # set this if you wish to use perl's malloc
153 # WARNING: Turning this on/off WILL break binary compatibility with extensions
154 # you may have compiled with/without it. Be prepared to recompile all
155 # extensions if you change the default. Currently, this cannot be enabled
156 # if you ask for USE_IMP_SYS above.
158 #PERL_MALLOC *= define
161 # set the install locations of the compiler include/libraries
162 # Running VCVARS32.BAT is *required* when using Visual C.
163 # Some versions of Visual C don't define MSVCDIR in the environment,
164 # so you may have to set CCHOME explicitly (spaces in the path name should
167 .IF "$(CCTYPE)" == "BORLAND"
168 CCHOME *= C:\borland\bcc55
169 .ELIF "$(CCTYPE)" == "GCC"
174 CCINCDIR *= $(CCHOME)\include
175 CCLIBDIR *= $(CCHOME)\lib
178 # Additional compiler flags can be specified here.
182 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
183 # for old symbols by default, at the expense of extreme pollution. You most
184 # probably just want to build modules that won't compile with
185 # perl Makefile.PL POLLUTE=1
186 # instead of enabling this. Please report such modules to the respective
189 #BUILDOPT += -DPERL_POLLUTE
192 # This should normally be disabled. Enabling it will disable the File::Glob
193 # implementation of CORE::glob.
195 #BUILDOPT += -DPERL_EXTERNAL_GLOB
198 # This should normally be disabled. Enabling it causes perl to read scripts
199 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
200 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
203 # specify semicolon-separated list of extra directories that modules will
204 # look for libraries (spaces in path names need not be quoted)
209 # set this to point to cmd.exe (only needed if you use some
210 # alternate shell that doesn't grok cmd.exe style commands)
212 #SHELL *= g:\winnt\system32\cmd.exe
215 # set this to your email address (perl will guess a value from
216 # from your loginname and your hostname, which may not be right)
221 ## Build configuration ends.
224 ##################### CHANGE THESE ONLY IF YOU MUST #####################
226 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
230 CRYPT_FLAG = -DHAVE_DES_FCRYPT
235 USE_5005THREADS *= undef
237 .IF "$(USE_5005THREADS)" == "define"
238 USE_ITHREADS != undef
241 .IF "$(USE_IMP_SYS)" == "define"
246 USE_ITHREADS *= undef
251 .IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
255 .IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
257 USE_5005THREADS != undef
260 .IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
261 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
264 .IF "$(USE_IMP_SYS)" != "undef"
265 BUILDOPT += -DPERL_IMPLICIT_SYS
268 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
270 PROCESSOR_ARCHITECTURE *= x86
273 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
274 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
276 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
283 .IF "$(USE_5005THREADS)" == "define"
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
285 .ELIF "$(USE_MULTI)" == "define"
286 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
288 .IF "$(USE_PERLIO)" == "define"
289 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
291 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
293 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
296 .IF "$(USE_ITHREADS)" == "define"
297 ARCHNAME !:= $(ARCHNAME)-thread
300 # Visual Studio 98 specific
301 .IF "$(CCTYPE)" == "MSVC60"
303 # VC 6.0 can load the socket dll on demand. Makes the test suite
304 # run in about 10% less time.
305 DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
307 .IF "$(CFG)" == "Debug"
309 # VC 6.0 seems capable of compiling perl correctly with optimizations
310 # enabled. Anything earlier fails tests.
315 ARCHDIR = ..\lib\$(ARCHNAME)
316 COREDIR = ..\lib\CORE
317 AUTODIR = ..\lib\auto
321 EXTUTILSDIR = $(LIBDIR)\ExtUtils
324 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
325 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
326 INST_LIB = $(INST_TOP)$(INST_VER)\lib
327 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
328 INST_COREDIR = $(INST_ARCHLIB)\CORE
329 INST_POD = $(INST_LIB)\pod
330 INST_HTML = $(INST_TOP)$(INST_VER)\html
333 # Programs to compile, build .lib files and link
338 .IF "$(CCTYPE)" == "BORLAND"
341 .IF "$(BCCOLD)" != "define"
353 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
354 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
355 DEFINES = -DWIN32 $(CRYPT_FLAG)
356 LOCDEFS = -DPERLDLL -DPERL_CORE
361 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
363 .IF "$(CFG)" == "Debug"
364 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
367 OPTIMIZE = -O2 -D_RTLDLL
371 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
372 $(PCHFLAGS) $(OPTIMIZE)
373 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
377 .IF "$(BCCOLD)" != "define"
379 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
381 .IF "$(BCCVCL)" == "define"
382 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
383 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
387 .ELIF "$(CCTYPE)" == "GCC"
403 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
404 DEFINES = -DWIN32 $(CRYPT_FLAG)
405 LOCDEFS = -DPERLDLL -DPERL_CORE
412 LIBFILES = $(CRYPT_LIB) $(LIBC) \
413 -lmoldname -lkernel32 -luser32 -lgdi32 \
414 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
415 -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
416 -lwinmm -lversion -lodbc32
418 .IF "$(CFG)" == "Debug"
419 OPTIMIZE = -g -O2 -DDEBUGGING
426 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
427 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
432 # NOTE: we assume that GCC uses MSVCRT.DLL
433 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
439 LIB32 = $(LINK32) -lib
446 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
447 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
448 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
449 LOCDEFS = -DPERLDLL -DPERL_CORE
453 .IF "$(USE_PERLCRT)" != "define"
462 .IF "$(CFG)" == "Debug"
463 .IF "$(CCTYPE)" == "MSVC20"
464 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
466 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
470 .IF "$(CFG)" == "Optimize"
471 # -O1 yields smaller code, which turns out to be faster than -O2
472 #OPTIMIZE = -O2 -MD -DNDEBUG
473 OPTIMIZE = -O1 -MD -DNDEBUG
475 OPTIMIZE = -Od -MD -DNDEBUG
480 .IF "$(WIN64)" == "define"
481 DEFINES += -DWIN64 -DCONSERVATIVE
482 OPTIMIZE += -Wp64 -Op
485 .IF "$(USE_PERLCRT)" != "define"
486 BUILDOPT += -DPERL_MSVCRT_READFIX
489 LIBBASEFILES = $(CRYPT_LIB) \
490 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
491 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
492 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
495 # win64 doesn't have some libs
496 .IF "$(WIN64)" != "define"
497 LIBBASEFILES += odbc32.lib odbccp32.lib
500 # we add LIBC here, since we may be using PerlCRT.dll
501 LIBFILES = $(LIBBASEFILES) $(LIBC)
503 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
504 $(PCHFLAGS) $(OPTIMIZE)
505 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
506 -libpath:"$(INST_COREDIR)" \
507 -machine:$(PROCESSOR_ARCHITECTURE)
514 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
516 # used to allow local linking flags that are not propogated into Config.pm,
520 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
522 #################### do not edit below this line #######################
523 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
535 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
538 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
541 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
547 .IF "$(CCTYPE)" == "BORLAND"
548 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
549 $(IMPLIB) $(*B).lib $@
550 .ELIF "$(CCTYPE)" == "GCC"
551 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
552 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
554 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
555 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
563 MINIPERL = ..\miniperl.exe
565 PERLEXE = ..\perl.exe
566 WPERLEXE = ..\wperl.exe
567 GLOBEXE = ..\perlglob.exe
568 CONFIGPM = ..\lib\Config.pm
569 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
572 # Nominate a target which causes extensions to be re-built
573 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
574 # on and really only the interface - i.e. the .def file used to export symbols
576 PERLDEP = perldll.def
579 PL2BAT = bin\pl2bat.pl
580 GLOBBAT = bin\perlglob.bat
604 ..\lib\ExtUtils\xsubpp \
611 .IF "$(CCTYPE)" == "BORLAND"
613 CFGSH_TMPL = config.bc
614 CFGH_TMPL = config_H.bc
616 .ELIF "$(CCTYPE)" == "GCC"
618 CFGSH_TMPL = config.gc
619 CFGH_TMPL = config_H.gc
620 PERLIMPLIB = ..\libperl58$(a)
624 .IF "$(WIN64)" == "define"
625 CFGSH_TMPL = config.vc64
626 CFGH_TMPL = config_H.vc64
628 CFGSH_TMPL = config.vc
629 CFGH_TMPL = config_H.vc
634 # makedef.pl must be updated if this changes, and this should normally
635 # only change when there is an incompatible revision of the public API.
636 PERLIMPLIB *= ..\perl58$(a)
637 PERLDLL = ..\perl58.dll
639 XCOPY = xcopy /f /r /i /d
640 RCOPY = xcopy /f /r /i /e /d
644 # filenames given to xsubpp must have forward slashes (since it puts
645 # full pathnames in #line strings)
646 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
684 EXTRACORE_SRC += perllib.c
686 .IF "$(PERL_MALLOC)" == "define"
687 EXTRACORE_SRC += ..\malloc.c
690 EXTRACORE_SRC += ..\perlio.c
697 .IF "$(USE_PERLIO)" == "define"
698 WIN32_SRC += .\win32io.c
701 .IF "$(CRYPT_SRC)" != ""
702 WIN32_SRC += .\$(CRYPT_SRC)
705 DLL_SRC = $(DYNALOADER).c
751 .\include\sys\socket.h \
754 CORE_H = $(CORE_NOCFG_H) .\config.h
756 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
757 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
758 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
759 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
760 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
761 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
762 DLL_OBJ = $(DLL_SRC:db:+$(o))
763 X2P_OBJ = $(X2P_SRC:db:+$(o))
765 PERLDLL_OBJ = $(CORE_OBJ)
766 PERLEXE_OBJ = perlmain$(o)
768 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
770 .IF "$(USE_SETARGV)" != ""
771 SETARGV_OBJ = setargv$(o)
774 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
775 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
776 Sys/Hostname Storable Filter/Util/Call Encode \
777 Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes \
779 STATIC_EXT = DynaLoader
782 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
784 POD2HTML = $(PODDIR)\pod2html
785 POD2MAN = $(PODDIR)\pod2man
786 POD2LATEX = $(PODDIR)\pod2latex
787 POD2TEXT = $(PODDIR)\pod2text
789 # vars must be separated by "\t+~\t+", since we're using the tempfile
790 # version of config_sh.pl (we were overflowing someone's buffer by
791 # trying to fit them all on the command line)
794 INST_DRV=$(INST_DRV) ~ \
795 INST_TOP=$(INST_TOP:s/\/\\/) ~ \
796 INST_VER=$(INST_VER:s/\/\\/) ~ \
797 INST_ARCH=$(INST_ARCH) ~ \
798 archname=$(ARCHNAME) ~ \
801 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
802 cf_email=$(EMAIL) ~ \
803 d_crypt=$(D_CRYPT) ~ \
804 d_mymalloc=$(PERL_MALLOC) ~ \
805 libs=$(LIBFILES:f) ~ \
806 incpath=$(CCINCDIR:s/\/\\/) ~ \
807 libperl=$(PERLIMPLIB:f) ~ \
808 libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
815 static_ext=$(STATIC_EXT) ~ \
816 use5005threads=$(USE_5005THREADS) ~ \
817 useithreads=$(USE_ITHREADS) ~ \
818 usethreads=$(USE_5005THREADS) ~ \
819 usemultiplicity=$(USE_MULTI) ~ \
820 useperlio=$(USE_PERLIO) ~ \
821 LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
825 # set up targets varying between Win95 and WinNT builds
828 .IF "$(IS_WIN95)" == "define"
830 RIGHTMAKE = __switch_makefiles
841 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
842 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
845 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
847 #----------------------------------------------------------------
849 #-------------------- BEGIN Win95 SPECIFIC ----------------------
851 # this target is a jump-off point for Win95
852 # 1. it switches to the Win95-specific makefile if it exists
853 # (__do_switch_makefiles)
854 # 2. it prints a message when the Win95-specific one finishes (__done)
855 # 3. it then kills this makefile by trying to make __no_such_target
857 __switch_makefiles: __do_switch_makefiles __done __no_such_target
859 __do_switch_makefiles:
860 .IF "$(NOTFIRST)" != "true"
861 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
866 .IF "$(NOTFIRST)" != "true"
868 @echo Build process complete. Ignore any errors after this message.
869 @echo Run "dmake test" to test and "dmake install" to install
872 # dummy targets for Win95-specific makefile
882 # This target is used to generate the new makefile (.\makefile.95) for Win95
884 .\makefile.95: .\makefile.mk
885 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
887 #--------------------- END Win95 SPECIFIC ---------------------
889 # a blank target for when builds don't need to do certain things
890 # this target added for Win95 port but used to keep the WinNT port able to
895 $(GLOBEXE) : perlglob$(o)
896 .IF "$(CCTYPE)" == "BORLAND"
897 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
898 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
899 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
900 .ELIF "$(CCTYPE)" == "GCC"
901 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
903 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
904 perlglob$(o) setargv$(o)
907 perlglob$(o) : perlglob.c
909 config.w32 : $(CFGSH_TMPL)
910 copy $(CFGSH_TMPL) config.w32
912 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
914 copy $(CFGH_TMPL) config.h
916 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
917 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
918 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
920 # this target is for when changes to the main config.sh happen
921 # edit config.{b,v,g}c and make this target once for each supported
922 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
924 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
925 $(CFGSH_TMPL) > ..\config.sh
926 -cd .. && del /f perl.exe
927 -cd .. && del /f perl*.dll
928 cd .. && perl configpm
931 -perl config_h.PL "INST_VER=$(INST_VER)"
932 rename config.h $(CFGH_TMPL)
934 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
935 cd .. && miniperl configpm
936 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
937 $(XCOPY) ..\*.h $(COREDIR)\*.*
938 $(XCOPY) *.h $(COREDIR)\*.*
939 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
940 $(RCOPY) include $(COREDIR)\*.*
941 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
942 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
944 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
945 .IF "$(CCTYPE)" == "BORLAND"
946 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
947 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
948 .ELIF "$(CCTYPE)" == "GCC"
949 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
950 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
952 $(LINK32) -subsystem:console -out:$@ \
953 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
957 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
959 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
960 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
962 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
963 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
965 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
966 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
967 # unless the .IF is true), so instead we use a .ELSE with the default.
968 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
970 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
971 .IF "$(USE_IMP_SYS)" == "define"
972 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
974 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
977 # 1. we don't want to rebuild miniperl.exe when config.h changes
978 # 2. we don't want to rebuild miniperl.exe with non-default config.h
979 $(MINI_OBJ) : $(CORE_NOCFG_H)
981 $(WIN32_OBJ) : $(CORE_H)
982 $(CORE_OBJ) : $(CORE_H)
983 $(DLL_OBJ) : $(CORE_H)
984 $(X2P_OBJ) : $(CORE_H)
986 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
987 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
988 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
990 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
991 .IF "$(CCTYPE)" == "BORLAND"
992 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
993 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
998 .ELIF "$(CCTYPE)" == "GCC"
999 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1000 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1001 dlltool --output-lib $(PERLIMPLIB) \
1002 --dllname $(PERLDLL:b).dll \
1004 --base-file perl.base \
1005 --output-exp perl.exp
1006 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1007 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
1010 $(LINK32) -dll -def:perldll.def -out:$@ \
1011 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1012 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1014 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1016 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1017 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1019 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1020 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1022 ..\x2p\hash$(o) : ..\x2p\hash.c
1023 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1025 ..\x2p\str$(o) : ..\x2p\str.c
1026 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1028 ..\x2p\util$(o) : ..\x2p\util.c
1029 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1031 ..\x2p\walk$(o) : ..\x2p\walk.c
1032 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1034 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1035 $(MINIPERL) ..\x2p\find2perl.PL
1036 $(MINIPERL) ..\x2p\s2p.PL
1037 .IF "$(CCTYPE)" == "BORLAND"
1038 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1039 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1040 .ELIF "$(CCTYPE)" == "GCC"
1041 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1042 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1044 $(LINK32) -subsystem:console -out:$@ \
1045 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1048 perlmain.c : runperl.c
1049 copy runperl.c perlmain.c
1051 perlmain$(o) : perlmain.c
1052 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1054 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1055 .IF "$(CCTYPE)" == "BORLAND"
1056 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1057 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1059 $(PERLIMPLIB) $(LIBFILES)\n)
1060 .ELIF "$(CCTYPE)" == "GCC"
1061 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1062 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1064 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1065 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1067 copy $(PERLEXE) $(WPERLEXE)
1068 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1069 copy splittree.pl ..
1070 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1072 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1073 if not exist $(AUTODIR) mkdir $(AUTODIR)
1074 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1075 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1076 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1077 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1078 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1079 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1081 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1082 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1084 #----------------------------------------------------------------------------------
1085 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1086 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1089 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1091 #----------------------------------------------------------------------------------
1095 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1096 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1097 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1099 utils: $(PERLEXE) $(X2P)
1100 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1101 copy ..\README.aix ..\pod\perlaix.pod
1102 copy ..\README.amiga ..\pod\perlamiga.pod
1103 copy ..\README.apollo ..\pod\perlapollo.pod
1104 copy ..\README.beos ..\pod\perlbeos.pod
1105 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1106 copy ..\README.ce ..\pod\perlce.pod
1107 copy ..\README.cygwin ..\pod\perlcygwin.pod
1108 copy ..\README.dgux ..\pod\perldgux.pod
1109 copy ..\README.dos ..\pod\perldos.pod
1110 copy ..\README.epoc ..\pod\perlepoc.pod
1111 copy ..\README.hpux ..\pod\perlhpux.pod
1112 copy ..\README.hurd ..\pod\perlhurd.pod
1113 copy ..\README.machten ..\pod\perlmachten.pod
1114 copy ..\README.macos ..\pod\perlmacos.pod
1115 copy ..\README.mint ..\pod\perlmint.pod
1116 copy ..\README.mpeix ..\pod\perlmpeix.pod
1117 copy ..\README.netware ..\pod\perlnetware.pod
1118 copy ..\README.os2 ..\pod\perlos2.pod
1119 copy ..\README.os390 ..\pod\perlos390.pod
1120 copy ..\README.plan9 ..\pod\perlplan9.pod
1121 copy ..\README.qnx ..\pod\perlqnx.pod
1122 copy ..\README.solaris ..\pod\perlsolaris.pod
1123 copy ..\README.tru64 ..\pod\perltru64.pod
1124 copy ..\README.uts ..\pod\perluts.pod
1125 copy ..\README.vmesa ..\pod\perlvmesa.pod
1126 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1127 copy ..\README.vos ..\pod\perlvos.pod
1128 copy ..\README.win32 ..\pod\perlwin32.pod
1129 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1130 cd ..\lib && $(PERLEXE) lib_pm.PL
1131 $(PERLEXE) $(PL2BAT) $(UTILS)
1134 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1135 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1137 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1138 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1139 -del /f $(LIBDIR)\XSLoader.pm
1140 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1141 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1142 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1143 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1144 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1145 -del /f $(LIBDIR)\PerlIO\Scalar.pm
1146 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1147 -del /f $(LIBDIR)\File\Glob.pm
1148 -del /f $(LIBDIR)\Storable.pm
1149 -del /f $(LIBDIR)\Filter\Util\Call.pm
1150 -del /f $(LIBDIR)\Digest\MD5.pm
1151 -del /f $(LIBDIR)\MIME\Base64.pm
1152 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1153 -del /f $(LIBDIR)\Time\HiRes.pm
1154 -del /f $(LIBDIR)\List\Util.pm
1155 -del /f $(LIBDIR)\Scalar\Util.pm
1156 -del /f $(LIBDIR)\Unicode\Normalize.pm
1157 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
1158 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
1159 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
1160 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
1161 -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
1162 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
1163 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
1164 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
1165 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
1166 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
1167 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1168 perlaix.pod perlamiga.pod perlapollo.pod \
1169 perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1170 perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \
1171 perlmachten.pod perlmint.pod \
1172 perlmacos.pod perlmpeix.pod perlnetware.pod \
1173 perlos2.pod perlos390.pod \
1174 perlplan9.pod perlqnx.pod \
1175 perlsolaris.pod perltru64.pod perluts.pod \
1176 perlvmesa.pod perlvms.pod perlvos.pod \
1177 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1178 podchecker podselect
1179 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
1180 perlivp dprofpp *.bat
1181 -cd ..\x2p && del /f find2perl s2p *.bat
1182 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1185 -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
1187 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
1188 -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
1190 install : all installbare installhtml
1192 installbare : $(RIGHTMAKE) utils
1193 $(PERLEXE) ..\installperl
1194 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1195 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1196 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1199 $(RCOPY) html\*.* $(INST_HTML)\*.*
1201 inst_lib : $(CONFIGPM)
1202 copy splittree.pl ..
1203 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1204 $(RCOPY) ..\lib $(INST_LIB)\*.*
1206 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1207 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1208 .IF "$(CCTYPE)" == "BORLAND"
1209 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1211 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1216 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1218 test-prep : all utils
1219 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1220 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1221 .IF "$(CCTYPE)" == "BORLAND"
1222 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1224 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1227 test : $(RIGHTMAKE) test-prep
1228 cd ..\t && $(PERLEXE) -I..\lib harness
1230 test-notty : test-prep
1231 set PERL_SKIP_TTY_TEST=1 && \
1232 cd ..\t && $(PERLEXE) -I.\lib harness
1234 test-wide : test-prep
1235 set HARNESS_PERL_SWITCHES=-C && \
1236 cd ..\t && $(PERLEXE) -I..\lib harness
1238 test-wide-notty : test-prep
1239 set PERL_SKIP_TTY_TEST=1 && \
1240 set HARNESS_PERL_SWITCHES=-C && \
1241 cd ..\t && $(PERLEXE) -I..\lib harness
1243 _test : $(RIGHTMAKE)
1244 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1245 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1246 .IF "$(CCTYPE)" == "BORLAND"
1247 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1249 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1251 cd ..\t && $(PERLEXE) -I..\lib harness
1253 clean : Extensions_clean
1254 -@erase miniperlmain$(o)
1256 -@erase perlglob$(o)
1257 -@erase perlmain$(o)
1265 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
1266 -@erase $(WIN32_OBJ)
1269 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1270 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1271 -@erase ..\x2p\*.exe ..\x2p\*.bat
1275 # Handy way to run perlbug -ok without having to install and run the
1276 # installed perlbug. We don't re-run the tests here - we trust the user.
1277 # Please *don't* use this unless all tests pass.
1278 # If you want to report test failures, use "dmake nok" instead.
1280 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1283 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1286 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1289 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok