2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # uncomment to enable multiple interpreters. This is need for fork()
52 # emulation and for thread support.
57 # Interpreter cloning/threads; now reasonably complete.
58 # This should be enabled to get the fork() emulation.
59 # This needs USE_MULTI above.
61 USE_ITHREADS *= define
64 # uncomment to enable the implicit "host" layer for all system calls
65 # made by perl. This needs USE_MULTI above.
66 # This is also needed to get fork().
71 # Comment out next assign to disable perl's I/O subsystem and use compiler's
72 # stdio for IO - depending on your compiler vendor and run time library you may
73 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
74 # You will also be unable to take full advantage of perl5.8's support for multiple
75 # encodings and may see lower IO performance. You have been warned.
79 # Comment this out if you don't want to enable large file support for
80 # some reason. Should normally only be changed to maintain compatibility
81 # with an older release of perl.
82 USE_LARGE_FILES *= define
85 # uncomment exactly one of the following
89 # Visual C++ > 2.x and < 6.x
93 # Borland 5.02 or later
95 # MinGW with gcc-2.95.2 or later
99 # uncomment this if your Borland compiler is older than v5.4.
102 # uncomment this if you want to use Borland's VCL as your CRT
106 # uncomment this if you are compiling under Windows 95/98 and command.com
107 # (not needed if you're running under 4DOS/NT 6.01 or later)
111 # uncomment next line if you want debug version of perl (big,slow)
112 # If not enabled, we automatically try to use maximum optimization
113 # with all compilers that are known to have a working optimizer.
118 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
119 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
120 # This currently requires VC 5.0 with Service Pack 3 or later.
121 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
122 # and follow the directions in the package to install.
124 # Not recommended if you have VC 6.x and you're not running Windows 9x.
126 #USE_PERLCRT *= define
129 # uncomment to enable linking with setargv.obj under the Visual C
130 # compiler. Setting this options enables perl to expand wildcards in
131 # arguments, but it may be harder to use alternate methods like
132 # File::DosGlob that are more powerful. This option is supported only with
135 #USE_SETARGV *= define
138 # if you want to have the crypt() builtin function implemented, leave this or
139 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
140 # version of des_fcrypt().
142 CRYPT_SRC *= fcrypt.c
145 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
146 # library, uncomment this, and make sure the library exists (see README.win32)
147 # Specify the full pathname of the library.
149 #CRYPT_LIB *= fcrypt.lib
152 # set this if you wish to use perl's malloc
153 # WARNING: Turning this on/off WILL break binary compatibility with extensions
154 # you may have compiled with/without it. Be prepared to recompile all
155 # extensions if you change the default. Currently, this cannot be enabled
156 # if you ask for USE_IMP_SYS above.
158 #PERL_MALLOC *= define
161 # set this to enable debugging mstats
162 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
163 # be enabled without PERL_MALLOC as well.
165 #DEBUG_MSTATS *= define
168 # set the install locations of the compiler include/libraries
169 # Running VCVARS32.BAT is *required* when using Visual C.
170 # Some versions of Visual C don't define MSVCDIR in the environment,
171 # so you may have to set CCHOME explicitly (spaces in the path name should
174 .IF "$(CCTYPE)" == "BORLAND"
175 CCHOME *= C:\borland\bcc55
176 .ELIF "$(CCTYPE)" == "GCC"
181 CCINCDIR *= $(CCHOME)\include
182 CCLIBDIR *= $(CCHOME)\lib
185 # Additional compiler flags can be specified here.
189 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
190 # for old symbols by default, at the expense of extreme pollution. You most
191 # probably just want to build modules that won't compile with
192 # perl Makefile.PL POLLUTE=1
193 # instead of enabling this. Please report such modules to the respective
196 #BUILDOPT += -DPERL_POLLUTE
199 # This should normally be disabled. Enabling it will disable the File::Glob
200 # implementation of CORE::glob.
202 #BUILDOPT += -DPERL_EXTERNAL_GLOB
205 # This should normally be disabled. Enabling it causes perl to read scripts
206 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
207 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
210 # specify semicolon-separated list of extra directories that modules will
211 # look for libraries (spaces in path names need not be quoted)
216 # set this to point to cmd.exe (only needed if you use some
217 # alternate shell that doesn't grok cmd.exe style commands)
219 #SHELL *= g:\winnt\system32\cmd.exe
222 # set this to your email address (perl will guess a value from
223 # from your loginname and your hostname, which may not be right)
228 ## Build configuration ends.
231 ##################### CHANGE THESE ONLY IF YOU MUST #####################
233 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
237 CRYPT_FLAG = -DHAVE_DES_FCRYPT
241 DEBUG_MSTATS *= undef
244 USE_ITHREADS *= undef
247 USE_LARGE_FILES *= undef
250 .IF "$(USE_IMP_SYS)" == "define"
254 .IF "$(PERL_MALLOC)" == "undef"
258 .IF "$(DEBUG_MSTATS)" == "define"
259 BUILDOPT += -DPERL_DEBUGGING_MSTATS
262 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
266 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
270 .IF "$(USE_MULTI)" != "undef"
271 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
274 .IF "$(USE_IMP_SYS)" != "undef"
275 BUILDOPT += -DPERL_IMPLICIT_SYS
278 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
280 PROCESSOR_ARCHITECTURE *= x86
283 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
284 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
286 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
293 .IF "$(USE_MULTI)" == "define"
294 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
296 .IF "$(USE_PERLIO)" == "define"
297 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
299 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
301 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
304 .IF "$(USE_ITHREADS)" == "define"
305 ARCHNAME !:= $(ARCHNAME)-thread
308 # Visual Studio 98 specific
309 .IF "$(CCTYPE)" == "MSVC60"
311 # VC 6.0 can load the socket dll on demand. Makes the test suite
312 # run in about 10% less time.
313 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
315 .IF "$(CFG)" == "Debug"
317 # VC 6.0 seems capable of compiling perl correctly with optimizations
318 # enabled. Anything earlier fails tests.
323 ARCHDIR = ..\lib\$(ARCHNAME)
324 COREDIR = ..\lib\CORE
325 AUTODIR = ..\lib\auto
329 EXTUTILSDIR = $(LIBDIR)\ExtUtils
332 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
333 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
334 INST_LIB = $(INST_TOP)$(INST_VER)\lib
335 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
336 INST_COREDIR = $(INST_ARCHLIB)\CORE
337 INST_POD = $(INST_LIB)\pod
338 INST_HTML = $(INST_TOP)$(INST_VER)\html
341 # Programs to compile, build .lib files and link
346 .IF "$(CCTYPE)" == "BORLAND"
349 .IF "$(BCCOLD)" != "define"
361 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
362 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
363 DEFINES = -DWIN32 $(CRYPT_FLAG)
364 LOCDEFS = -DPERLDLL -DPERL_CORE
369 LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
371 .IF "$(CFG)" == "Debug"
372 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
375 OPTIMIZE = -O2 -D_RTLDLL
379 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
380 $(PCHFLAGS) $(OPTIMIZE)
381 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
385 .IF "$(BCCOLD)" != "define"
387 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
389 .IF "$(BCCVCL)" == "define"
390 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
391 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
395 .ELIF "$(CCTYPE)" == "GCC"
411 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
412 DEFINES = -DWIN32 $(CRYPT_FLAG)
413 LOCDEFS = -DPERLDLL -DPERL_CORE
420 LIBFILES = $(CRYPT_LIB) $(LIBC) \
421 -lmoldname -lkernel32 -luser32 -lgdi32 \
422 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
423 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
424 -lwinmm -lversion -lodbc32
426 .IF "$(CFG)" == "Debug"
427 OPTIMIZE = -g -O2 -DDEBUGGING
434 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
435 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
440 # NOTE: we assume that GCC uses MSVCRT.DLL
441 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
447 LIB32 = $(LINK32) -lib
454 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
455 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
456 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
457 LOCDEFS = -DPERLDLL -DPERL_CORE
461 .IF "$(USE_PERLCRT)" != "define"
467 .IF "$(CFG)" == "Debug"
468 .IF "$(CCTYPE)" == "MSVC20"
469 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
471 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
475 OPTIMIZE = -MD -Zi -DNDEBUG
476 # we enable debug symbols in release builds also
477 LINK_DBG = -debug -opt:ref,icf
478 # you may want to enable this if you want COFF symbols in the executables
479 # in addition to the PDB symbols. The default Dr. Watson that ships with
480 # Windows can use the the former but not latter. The free WinDbg can be
481 # installed to get better stack traces from just the PDB symbols, so we
482 # avoid the bloat of COFF symbols by default.
483 #LINK_DBG = $(LINK_DBG) -debugtype:both
484 .IF "$(WIN64)" == "define"
485 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
489 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
495 .IF "$(WIN64)" == "define"
496 DEFINES += -DWIN64 -DCONSERVATIVE
497 OPTIMIZE += -Wp64 -Op
500 .IF "$(USE_PERLCRT)" != "define"
501 BUILDOPT += -DPERL_MSVCRT_READFIX
504 LIBBASEFILES = $(CRYPT_LIB) \
505 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
506 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
507 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
510 # win64 doesn't have some libs
511 .IF "$(WIN64)" != "define"
512 LIBBASEFILES += odbc32.lib odbccp32.lib
515 # we add LIBC here, since we may be using PerlCRT.dll
516 LIBFILES = $(LIBBASEFILES) $(LIBC)
518 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
519 $(PCHFLAGS) $(OPTIMIZE)
520 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
521 -libpath:"$(INST_COREDIR)" \
522 -machine:$(PROCESSOR_ARCHITECTURE)
529 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
531 # used to allow local linking flags that are not propogated into Config.pm,
535 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
537 #################### do not edit below this line #######################
538 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
540 # Some dmake's built with Borland C++, including Sarathy's one at:
541 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
542 # require backslashes to be doubled-up when written to $(mktmp) files.
543 # Other dmake's do not require this and would actually output a double
544 # backslash if they were doubled-up.
545 .IF "$(shell type $(mktmp \\))"=="\\"
561 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
564 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
567 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
573 .IF "$(CCTYPE)" == "BORLAND"
574 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
575 $(IMPLIB) $(*B).lib $@
576 .ELIF "$(CCTYPE)" == "GCC"
577 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
578 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
580 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
581 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
585 .IF "$(CCTYPE)" == "GCC"
586 $(RSC) --use-temp-file -i $< -o $@
593 MINIPERL = ..\miniperl.exe
595 PERLEXE = ..\perl.exe
596 WPERLEXE = ..\wperl.exe
597 GLOBEXE = ..\perlglob.exe
598 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
599 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
602 # Unicode data files generated by mktables
603 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
604 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
605 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
606 ..\lib\unicore\PVA.pl
608 # Directories of Unicode data files generated by mktables
609 UNIDATADIR1 = ..\lib\unicore\To
610 UNIDATADIR2 = ..\lib\unicore\lib
612 PERLEXE_ICO = .\perlexe.ico
613 PERLEXE_RES = .\perlexe.res
616 # Nominate a target which causes extensions to be re-built
617 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
618 # on and really only the interface - i.e. the .def file used to export symbols
620 PERLDEP = perldll.def
623 PL2BAT = bin\pl2bat.pl
624 GLOBBAT = bin\perlglob.bat
663 .IF "$(CCTYPE)" == "BORLAND"
665 CFGSH_TMPL = config.bc
666 CFGH_TMPL = config_H.bc
668 .ELIF "$(CCTYPE)" == "GCC"
670 CFGSH_TMPL = config.gc
671 CFGH_TMPL = config_H.gc
672 PERLIMPLIB = ..\libperl59$(a)
676 .IF "$(WIN64)" == "define"
677 CFGSH_TMPL = config.vc64
678 CFGH_TMPL = config_H.vc64
680 CFGSH_TMPL = config.vc
681 CFGH_TMPL = config_H.vc
686 # makedef.pl must be updated if this changes, and this should normally
687 # only change when there is an incompatible revision of the public API.
688 PERLIMPLIB *= ..\perl59$(a)
689 PERLDLL = ..\perl59.dll
691 XCOPY = xcopy /f /r /i /d
692 RCOPY = xcopy /f /r /i /e /d
696 # filenames given to xsubpp must have forward slashes (since it puts
697 # full pathnames in #line strings)
698 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
737 EXTRACORE_SRC += perllib.c
739 .IF "$(PERL_MALLOC)" == "define"
740 EXTRACORE_SRC += ..\malloc.c
743 EXTRACORE_SRC += ..\perlio.c
750 # We need this for miniperl build unless we override canned
751 # config.h #define building mini\*
752 #.IF "$(USE_PERLIO)" == "define"
753 WIN32_SRC += .\win32io.c
756 .IF "$(CRYPT_SRC)" != ""
757 WIN32_SRC += .\$(CRYPT_SRC)
760 DLL_SRC = $(DYNALOADER).c
807 .\include\sys\socket.h \
810 CORE_H = $(CORE_NOCFG_H) .\config.h
812 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
813 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
814 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
815 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
816 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
817 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
818 DLL_OBJ = $(DLL_SRC:db:+$(o))
819 X2P_OBJ = $(X2P_SRC:db:+$(o))
821 PERLDLL_OBJ = $(CORE_OBJ)
822 PERLEXE_OBJ = perlmain$(o)
824 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
826 .IF "$(USE_SETARGV)" != ""
827 SETARGV_OBJ = setargv$(o)
830 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
831 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
832 Sys/Hostname Storable Filter/Util/Call Encode \
833 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
834 Unicode/Normalize Win32
838 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
840 POD2HTML = $(PODDIR)\pod2html
841 POD2MAN = $(PODDIR)\pod2man
842 POD2LATEX = $(PODDIR)\pod2latex
843 POD2TEXT = $(PODDIR)\pod2text
845 # vars must be separated by "\t+~\t+", since we're using the tempfile
846 # version of config_sh.pl (we were overflowing someone's buffer by
847 # trying to fit them all on the command line)
850 INST_DRV=$(INST_DRV) ~ \
851 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
852 INST_VER=$(INST_VER:s,\,$B,) ~ \
853 INST_ARCH=$(INST_ARCH) ~ \
854 archname=$(ARCHNAME) ~ \
857 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
858 cf_email=$(EMAIL) ~ \
859 d_crypt=$(D_CRYPT) ~ \
860 d_mymalloc=$(PERL_MALLOC) ~ \
861 libs=$(LIBFILES:f) ~ \
862 incpath=$(CCINCDIR:s,\,$B,) ~ \
863 libperl=$(PERLIMPLIB:f) ~ \
864 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
871 static_ext=$(STATIC_EXT) ~ \
872 usethreads=$(USE_ITHREADS) ~ \
873 useithreads=$(USE_ITHREADS) ~ \
874 usemultiplicity=$(USE_MULTI) ~ \
875 useperlio=$(USE_PERLIO) ~ \
876 uselargefiles=$(USE_LARGE_FILES) ~ \
877 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
881 # set up targets varying between Win95 and WinNT builds
884 .IF "$(IS_WIN95)" == "define"
886 RIGHTMAKE = __switch_makefiles
896 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
897 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
900 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
902 #----------------------------------------------------------------
904 #-------------------- BEGIN Win95 SPECIFIC ----------------------
906 # this target is a jump-off point for Win95
907 # 1. it switches to the Win95-specific makefile if it exists
908 # (__do_switch_makefiles)
909 # 2. it prints a message when the Win95-specific one finishes (__done)
910 # 3. it then kills this makefile by trying to make __no_such_target
912 __switch_makefiles: __do_switch_makefiles __done __no_such_target
914 __do_switch_makefiles:
915 .IF "$(NOTFIRST)" != "true"
916 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
921 .IF "$(NOTFIRST)" != "true"
923 @echo Build process complete. Ignore any errors after this message.
924 @echo Run "dmake test" to test and "dmake install" to install
927 # dummy targets for Win95-specific makefile
937 # This target is used to generate the new makefile (.\makefile.95) for Win95
939 .\makefile.95: .\makefile.mk
940 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
942 #--------------------- END Win95 SPECIFIC ---------------------
944 # a blank target for when builds don't need to do certain things
945 # this target added for Win95 port but used to keep the WinNT port able to
950 $(GLOBEXE) : perlglob$(o)
951 .IF "$(CCTYPE)" == "BORLAND"
952 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
953 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
954 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
955 .ELIF "$(CCTYPE)" == "GCC"
956 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
958 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
959 perlglob$(o) setargv$(o)
962 perlglob$(o) : perlglob.c
964 config.w32 : $(CFGSH_TMPL)
965 copy $(CFGSH_TMPL) config.w32
967 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
969 copy $(CFGH_TMPL) config.h
971 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
972 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
973 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
975 # this target is for when changes to the main config.sh happen
976 # edit config.{b,v,g}c and make this target once for each supported
977 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
979 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
980 $(CFGSH_TMPL) > ..\config.sh
981 -cd .. && del /f perl.exe
982 -cd .. && del /f perl*.dll
983 cd .. && perl configpm
986 -perl config_h.PL "INST_VER=$(INST_VER)"
987 rename config.h $(CFGH_TMPL)
989 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
990 cd .. && miniperl configpm
991 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
992 $(XCOPY) ..\*.h $(COREDIR)\*.*
993 $(XCOPY) *.h $(COREDIR)\*.*
994 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
995 $(RCOPY) include $(COREDIR)\*.*
996 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
997 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
999 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1000 .IF "$(CCTYPE)" == "BORLAND"
1001 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1002 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1003 .ELIF "$(CCTYPE)" == "GCC"
1004 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1005 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1007 $(LINK32) -subsystem:console -out:$@ \
1008 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
1012 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1014 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1015 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1017 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1018 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1020 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1021 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1022 # unless the .IF is true), so instead we use a .ELSE with the default.
1023 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1025 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1026 .IF "$(USE_IMP_SYS)" == "define"
1027 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1029 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1032 # 1. we don't want to rebuild miniperl.exe when config.h changes
1033 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1034 $(MINI_OBJ) : $(CORE_NOCFG_H)
1036 $(WIN32_OBJ) : $(CORE_H)
1038 $(CORE_OBJ) : $(CORE_H)
1040 $(DLL_OBJ) : $(CORE_H)
1042 $(X2P_OBJ) : $(CORE_H)
1044 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1045 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1046 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1047 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1049 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1050 .IF "$(CCTYPE)" == "BORLAND"
1051 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1052 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
1057 .ELIF "$(CCTYPE)" == "GCC"
1058 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1059 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) \
1060 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs|tr \\\\ /) \
1061 $(LIBFILES) $(LKPOST))
1062 dlltool --output-lib $(PERLIMPLIB) \
1063 --dllname $(PERLDLL:b).dll \
1065 --base-file perl.base \
1066 --output-exp perl.exp
1067 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1068 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) \
1069 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs|tr \\\\ /) \
1070 $(LIBFILES) perl.exp $(LKPOST))
1072 $(LINK32) -dll -def:perldll.def -out:$@ \
1073 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
1074 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1075 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
1077 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1080 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1081 $(MINIPERL) makeico.pl > $@
1083 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1085 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1086 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1088 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1089 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1091 ..\x2p\hash$(o) : ..\x2p\hash.c
1092 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1094 ..\x2p\str$(o) : ..\x2p\str.c
1095 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1097 ..\x2p\util$(o) : ..\x2p\util.c
1098 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1100 ..\x2p\walk$(o) : ..\x2p\walk.c
1101 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1103 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1104 $(MINIPERL) ..\x2p\find2perl.PL
1105 $(MINIPERL) ..\x2p\s2p.PL
1106 .IF "$(CCTYPE)" == "BORLAND"
1107 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1108 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
1109 .ELIF "$(CCTYPE)" == "GCC"
1110 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1111 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
1113 $(LINK32) -subsystem:console -out:$@ \
1114 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
1117 perlmain.c : runperl.c
1118 copy runperl.c perlmain.c
1120 perlmain$(o) : perlmain.c
1121 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1123 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1124 .IF "$(CCTYPE)" == "BORLAND"
1125 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1126 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
1128 $(PERLIMPLIB) $(LIBFILES)\n)
1129 .ELIF "$(CCTYPE)" == "GCC"
1130 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1131 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1133 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1134 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1136 copy $(PERLEXE) $(WPERLEXE)
1137 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1138 copy splittree.pl ..
1139 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1141 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1142 if not exist $(AUTODIR) mkdir $(AUTODIR)
1143 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1144 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1145 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1146 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1147 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1148 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1150 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1151 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1153 #----------------------------------------------------------------------------------
1154 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1155 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1156 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1158 Extensions_static : buildext.pl
1159 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1160 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1162 # Note: The next two targets explicitly remove a "blibdirs.exists" file that
1163 # currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
1166 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1167 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1168 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
1170 Extensions_realclean :
1171 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1172 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1173 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
1175 #----------------------------------------------------------------------------------
1179 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1180 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1181 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1183 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1184 # so please check that script before making structural changes here
1185 utils: $(PERLEXE) $(X2P)
1186 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1187 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1188 copy ..\README.aix ..\pod\perlaix.pod
1189 copy ..\README.amiga ..\pod\perlamiga.pod
1190 copy ..\README.apollo ..\pod\perlapollo.pod
1191 copy ..\README.beos ..\pod\perlbeos.pod
1192 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1193 copy ..\README.ce ..\pod\perlce.pod
1194 copy ..\README.cn ..\pod\perlcn.pod
1195 copy ..\README.cygwin ..\pod\perlcygwin.pod
1196 copy ..\README.dgux ..\pod\perldgux.pod
1197 copy ..\README.dos ..\pod\perldos.pod
1198 copy ..\README.epoc ..\pod\perlepoc.pod
1199 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1200 copy ..\README.hpux ..\pod\perlhpux.pod
1201 copy ..\README.hurd ..\pod\perlhurd.pod
1202 copy ..\README.irix ..\pod\perlirix.pod
1203 copy ..\README.jp ..\pod\perljp.pod
1204 copy ..\README.ko ..\pod\perlko.pod
1205 copy ..\README.machten ..\pod\perlmachten.pod
1206 copy ..\README.macos ..\pod\perlmacos.pod
1207 copy ..\README.macosx ..\pod\perlmacosx.pod
1208 copy ..\README.mint ..\pod\perlmint.pod
1209 copy ..\README.mpeix ..\pod\perlmpeix.pod
1210 copy ..\README.netware ..\pod\perlnetware.pod
1211 copy ..\README.os2 ..\pod\perlos2.pod
1212 copy ..\README.os390 ..\pod\perlos390.pod
1213 copy ..\README.os400 ..\pod\perlos400.pod
1214 copy ..\README.plan9 ..\pod\perlplan9.pod
1215 copy ..\README.qnx ..\pod\perlqnx.pod
1216 copy ..\README.solaris ..\pod\perlsolaris.pod
1217 copy ..\README.tru64 ..\pod\perltru64.pod
1218 copy ..\README.tw ..\pod\perltw.pod
1219 copy ..\README.uts ..\pod\perluts.pod
1220 copy ..\README.vmesa ..\pod\perlvmesa.pod
1221 copy ..\README.vms ..\pod\perlvms.pod
1222 copy ..\README.vos ..\pod\perlvos.pod
1223 copy ..\README.win32 ..\pod\perlwin32.pod
1224 copy ..\pod\perl592delta.pod ..\pod\perldelta.pod
1225 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1226 cd ..\lib && $(PERLEXE) lib_pm.PL
1227 $(PERLEXE) $(PL2BAT) $(UTILS)
1229 # Note that the pod cleanup in this next section is parsed (and regenerated
1230 # by pod/buildtoc so please check that script before making changes here
1232 # the doubled rmdir calls are needed because older cmd shells
1233 # don't understand /q
1234 distclean: realclean
1235 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1236 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1238 -del /f $(DYNALOADER).c
1239 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1240 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1241 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1242 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1243 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1244 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1245 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1246 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1247 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1248 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1249 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1250 -del /f $(LIBDIR)\ByteLoader.pm
1251 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1252 -del /f $(LIBDIR)\Devel\PPPort.pm
1253 -del /f $(LIBDIR)\File\Glob.pm
1254 -del /f $(LIBDIR)\Storable.pm
1255 -del /f $(LIBDIR)\Digest\MD5.pm
1256 -del /f $(LIBDIR)\PerlIO\encoding.pm
1257 -del /f $(LIBDIR)\PerlIO\scalar.pm
1258 -del /f $(LIBDIR)\PerlIO\via.pm
1259 -del /f $(LIBDIR)\Sys\Hostname.pm
1260 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1261 -del /f $(LIBDIR)\threads\shared.pm
1262 -del /f $(LIBDIR)\Time\HiRes.pm
1263 -del /f $(LIBDIR)\Unicode\Normalize.pm
1264 -del /f $(LIBDIR)\Win32.pm
1265 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1266 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1267 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1268 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1269 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1270 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1271 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1272 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1273 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1274 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1275 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1276 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1277 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1278 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1279 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1280 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1281 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1282 -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
1283 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1284 -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
1285 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1286 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1287 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1288 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1289 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1290 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1291 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1292 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1293 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1294 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1295 perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
1296 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1298 pod2html pod2latex pod2man pod2text pod2usage \
1299 podchecker podselect
1300 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1301 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1302 xsubpp instmodsh prove corelist
1303 -cd ..\x2p && del /f find2perl s2p psed *.bat
1304 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1308 -del /f $(PERLEXE_ICO) perl.base
1309 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1310 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1311 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1312 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1313 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1314 -if exist $(COREDIR) rmdir /s $(COREDIR)
1316 install : all installbare installhtml
1318 installbare : $(RIGHTMAKE) utils
1319 $(PERLEXE) ..\installperl
1320 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1321 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1322 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1323 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1324 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1327 $(RCOPY) html\*.* $(INST_HTML)\*.*
1329 inst_lib : $(CONFIGPM)
1330 copy splittree.pl ..
1331 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1332 $(RCOPY) ..\lib $(INST_LIB)\*.*
1334 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1335 cd ..\lib\unicore && \
1336 ..\$(MINIPERL) -I.. mktables
1338 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1339 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1340 if exist ..\t\perl.exe del /f ..\t\perl.exe
1341 rename ..\t\miniperl.exe perl.exe
1342 .IF "$(CCTYPE)" == "BORLAND"
1343 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1345 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1349 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1351 test-prep : all utils
1352 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1353 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1354 .IF "$(CCTYPE)" == "BORLAND"
1355 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1357 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1360 test : $(RIGHTMAKE) test-prep
1361 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1363 test-notty : test-prep
1364 set PERL_SKIP_TTY_TEST=1 && \
1365 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1367 _test : $(RIGHTMAKE)
1368 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1369 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1370 .IF "$(CCTYPE)" == "BORLAND"
1371 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1373 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1375 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1377 # the doubled rmdir calls are needed because older cmd shells
1378 # don't understand /q
1380 -@erase miniperlmain$(o)
1382 -@erase perlglob$(o)
1383 -@erase perlmain$(o)
1391 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1392 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1393 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1394 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1395 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1396 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1397 -@erase $(UNIDATAFILES)
1398 -@erase $(WIN32_OBJ)
1401 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1402 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1403 -@erase ..\x2p\*.exe ..\x2p\*.bat
1407 clean : Extensions_clean _clean
1409 realclean : Extensions_realclean _clean
1411 # Handy way to run perlbug -ok without having to install and run the
1412 # installed perlbug. We don't re-run the tests here - we trust the user.
1413 # Please *don't* use this unless all tests pass.
1414 # If you want to report test failures, use "dmake nok" instead.
1416 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1419 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1422 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1425 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok