2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
101 # Borland 5.02 or later
103 # MinGW with gcc-2.95.2 or later
107 # uncomment this if your Borland compiler is older than v5.4.
110 # uncomment this if you want to use Borland's VCL as your CRT
114 # uncomment this if you are compiling under Windows 95/98 and command.com
115 # (not needed if you're running under 4DOS/NT 6.01 or later)
119 # uncomment next line if you want debug version of perl (big,slow)
120 # If not enabled, we automatically try to use maximum optimization
121 # with all compilers that are known to have a working optimizer.
126 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
127 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
128 # This currently requires VC 5.0 with Service Pack 3 or later.
129 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
130 # and follow the directions in the package to install.
132 # Not recommended if you have VC 6.x and you're not running Windows 9x.
134 #USE_PERLCRT *= define
137 # uncomment to enable linking with setargv.obj under the Visual C
138 # compiler. Setting this options enables perl to expand wildcards in
139 # arguments, but it may be harder to use alternate methods like
140 # File::DosGlob that are more powerful. This option is supported only with
143 #USE_SETARGV *= define
146 # if you want to have the crypt() builtin function implemented, leave this or
147 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
148 # version of des_fcrypt().
150 CRYPT_SRC *= fcrypt.c
153 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
154 # library, uncomment this, and make sure the library exists (see README.win32)
155 # Specify the full pathname of the library.
157 #CRYPT_LIB *= fcrypt.lib
160 # set this if you wish to use perl's malloc
161 # WARNING: Turning this on/off WILL break binary compatibility with extensions
162 # you may have compiled with/without it. Be prepared to recompile all
163 # extensions if you change the default. Currently, this cannot be enabled
164 # if you ask for USE_IMP_SYS above.
166 #PERL_MALLOC *= define
169 # set this to enable debugging mstats
170 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
171 # be enabled without PERL_MALLOC as well.
173 #DEBUG_MSTATS *= define
176 # set the install locations of the compiler include/libraries
177 # Running VCVARS32.BAT is *required* when using Visual C.
178 # Some versions of Visual C don't define MSVCDIR in the environment,
179 # so you may have to set CCHOME explicitly (spaces in the path name should
182 .IF "$(CCTYPE)" == "BORLAND"
183 CCHOME *= C:\borland\bcc55
184 .ELIF "$(CCTYPE)" == "GCC"
189 CCINCDIR *= $(CCHOME)\include
190 CCLIBDIR *= $(CCHOME)\lib
193 # Additional compiler flags can be specified here.
195 BUILDOPT *= $(BUILDOPTEXTRA)
198 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
199 # internal hash function unless the PERL_HASH_SEED environment variable is set.
200 # Alternatively, adding -DNO_HASH_SEED will completely disable the
201 # randomization feature.
202 # The latter is required to maintain binary compatibility with Perl 5.8.0.
204 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
205 #BUILDOPT += -DNO_HASH_SEED
208 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
209 # for old symbols by default, at the expense of extreme pollution. You most
210 # probably just want to build modules that won't compile with
211 # perl Makefile.PL POLLUTE=1
212 # instead of enabling this. Please report such modules to the respective
215 #BUILDOPT += -DPERL_POLLUTE
218 # This should normally be disabled. Enabling it will disable the File::Glob
219 # implementation of CORE::glob.
221 #BUILDOPT += -DPERL_EXTERNAL_GLOB
224 # This should normally be disabled. Enabling it causes perl to read scripts
225 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
227 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
230 # specify semicolon-separated list of extra directories that modules will
231 # look for libraries (spaces in path names need not be quoted)
236 # set this to point to cmd.exe (only needed if you use some
237 # alternate shell that doesn't grok cmd.exe style commands)
239 #SHELL *= g:\winnt\system32\cmd.exe
242 # set this to your email address (perl will guess a value from
243 # from your loginname and your hostname, which may not be right)
248 ## Build configuration ends.
251 ##################### CHANGE THESE ONLY IF YOU MUST #####################
253 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
257 CRYPT_FLAG = -DHAVE_DES_FCRYPT
261 DEBUG_MSTATS *= undef
263 USE_SITECUST *= undef
265 USE_ITHREADS *= undef
268 USE_LARGE_FILES *= undef
271 .IF "$(USE_IMP_SYS)" == "define"
275 .IF "$(PERL_MALLOC)" == "undef"
279 .IF "$(DEBUG_MSTATS)" == "define"
280 BUILDOPT += -DPERL_DEBUGGING_MSTATS
283 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
287 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
291 .IF "$(USE_SITECUST)" == "define"
292 BUILDOPT += -DUSE_SITECUSTOMIZE
295 .IF "$(USE_MULTI)" != "undef"
296 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
299 .IF "$(USE_IMP_SYS)" != "undef"
300 BUILDOPT += -DPERL_IMPLICIT_SYS
303 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
305 PROCESSOR_ARCHITECTURE *= x86
308 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
309 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
311 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
318 .IF "$(USE_MULTI)" == "define"
319 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
321 .IF "$(USE_PERLIO)" == "define"
322 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
324 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
326 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
329 .IF "$(USE_ITHREADS)" == "define"
330 ARCHNAME !:= $(ARCHNAME)-thread
333 # Visual Studio 98 specific
334 .IF "$(CCTYPE)" == "MSVC60"
336 # VC 6.0 can load the socket dll on demand. Makes the test suite
337 # run in about 10% less time.
338 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
340 .IF "$(CFG)" == "Debug"
342 # VC 6.0 seems capable of compiling perl correctly with optimizations
343 # enabled. Anything earlier fails tests.
348 ARCHDIR = ..\lib\$(ARCHNAME)
349 COREDIR = ..\lib\CORE
350 AUTODIR = ..\lib\auto
354 EXTUTILSDIR = $(LIBDIR)\ExtUtils
357 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
358 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
359 INST_LIB = $(INST_TOP)$(INST_VER)\lib
360 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
361 INST_COREDIR = $(INST_ARCHLIB)\CORE
362 INST_POD = $(INST_LIB)\pod
363 INST_HTML = $(INST_TOP)$(INST_VER)\html
366 # Programs to compile, build .lib files and link
371 .IF "$(CCTYPE)" == "BORLAND"
374 .IF "$(BCCOLD)" != "define"
386 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
387 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
388 DEFINES = -DWIN32 $(CRYPT_FLAG)
389 LOCDEFS = -DPERLDLL -DPERL_CORE
394 LIBFILES = $(CRYPT_LIB) ws2_32.lib import32.lib $(LIBC)
396 .IF "$(CFG)" == "Debug"
397 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
400 OPTIMIZE = -O2 -D_RTLDLL
404 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
405 $(PCHFLAGS) $(OPTIMIZE)
406 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
410 .IF "$(BCCOLD)" != "define"
412 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
414 .IF "$(BCCVCL)" == "define"
415 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
416 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
420 .ELIF "$(CCTYPE)" == "GCC"
436 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
437 DEFINES = -DWIN32 $(CRYPT_FLAG)
438 LOCDEFS = -DPERLDLL -DPERL_CORE
445 LIBFILES = $(CRYPT_LIB) $(LIBC) \
446 -lmoldname -lkernel32 -luser32 -lgdi32 \
447 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
448 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
449 -lwinmm -lversion -lodbc32
451 .IF "$(CFG)" == "Debug"
452 OPTIMIZE = -g -O2 -DDEBUGGING
459 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
460 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
465 # NOTE: we assume that GCC uses MSVCRT.DLL
466 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
472 LIB32 = $(LINK32) -lib
479 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
480 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
481 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
482 LOCDEFS = -DPERLDLL -DPERL_CORE
486 .IF "$(USE_PERLCRT)" != "define"
492 .IF "$(CFG)" == "Debug"
493 .IF "$(CCTYPE)" == "MSVC20"
494 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
496 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
500 OPTIMIZE = -MD -Zi -DNDEBUG
501 # we enable debug symbols in release builds also
502 LINK_DBG = -debug -opt:ref,icf
503 # you may want to enable this if you want COFF symbols in the executables
504 # in addition to the PDB symbols. The default Dr. Watson that ships with
505 # Windows can use the the former but not latter. The free WinDbg can be
506 # installed to get better stack traces from just the PDB symbols, so we
507 # avoid the bloat of COFF symbols by default.
508 #LINK_DBG = $(LINK_DBG) -debugtype:both
509 .IF "$(WIN64)" == "define"
510 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
514 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
520 .IF "$(WIN64)" == "define"
521 DEFINES += -DWIN64 -DCONSERVATIVE
522 OPTIMIZE += -Wp64 -Op
525 .IF "$(USE_PERLCRT)" != "define"
526 BUILDOPT += -DPERL_MSVCRT_READFIX
529 LIBBASEFILES = $(CRYPT_LIB) \
530 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
531 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
532 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
535 # win64 doesn't have some libs
536 .IF "$(WIN64)" != "define"
537 LIBBASEFILES += odbc32.lib odbccp32.lib
540 # we add LIBC here, since we may be using PerlCRT.dll
541 LIBFILES = $(LIBBASEFILES) $(LIBC)
543 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
544 $(PCHFLAGS) $(OPTIMIZE)
545 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
546 -libpath:"$(INST_COREDIR)" \
547 -machine:$(PROCESSOR_ARCHITECTURE)
554 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
556 # used to allow local linking flags that are not propogated into Config.pm,
560 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
562 #################### do not edit below this line #######################
563 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
565 # Some dmake's built with Borland C++, including Sarathy's one at:
566 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
567 # require backslashes to be doubled-up when written to $(mktmp) files.
568 # Other dmake's do not require this and would actually output a double
569 # backslash if they were doubled-up.
570 .IF "$(shell @type $(mktmp \\))"=="\\"
576 # There is a related issue with other escape sequences: Sarathy's old
577 # dmake automatically maps escape sequences like \n to their ASCII values
578 # when used in macros, while other dmake's only do so if this behaviour
579 # is explicitly requested with the :m modifier.
581 .IF "$(shell @type $(mktmp \n))"=="\n"
597 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
600 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
603 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
609 .IF "$(CCTYPE)" == "BORLAND"
610 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
611 $(IMPLIB) $(*B).lib $@
612 .ELIF "$(CCTYPE)" == "GCC"
613 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
614 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
616 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
617 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
621 .IF "$(CCTYPE)" == "GCC"
622 $(RSC) --use-temp-file -i $< -o $@
629 MINIPERL = ..\miniperl.exe
631 PERLEXE = ..\perl.exe
632 WPERLEXE = ..\wperl.exe
633 GLOBEXE = ..\perlglob.exe
634 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
635 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
638 # Unicode data files generated by mktables
639 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
640 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
641 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
642 ..\lib\unicore\PVA.pl
644 # Directories of Unicode data files generated by mktables
645 UNIDATADIR1 = ..\lib\unicore\To
646 UNIDATADIR2 = ..\lib\unicore\lib
648 PERLEXE_ICO = .\perlexe.ico
649 PERLEXE_RES = .\perlexe.res
652 # Nominate a target which causes extensions to be re-built
653 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
654 # on and really only the interface - i.e. the .def file used to export symbols
656 PERLDEP = perldll.def
659 PL2BAT = bin\pl2bat.pl
660 GLOBBAT = bin\perlglob.bat
700 .IF "$(CCTYPE)" == "BORLAND"
702 CFGSH_TMPL = config.bc
703 CFGH_TMPL = config_H.bc
705 .ELIF "$(CCTYPE)" == "GCC"
707 CFGSH_TMPL = config.gc
708 CFGH_TMPL = config_H.gc
709 PERLIMPLIB = ..\libperl59$(a)
713 .IF "$(WIN64)" == "define"
714 CFGSH_TMPL = config.vc64
715 CFGH_TMPL = config_H.vc64
717 CFGSH_TMPL = config.vc
718 CFGH_TMPL = config_H.vc
723 # makedef.pl must be updated if this changes, and this should normally
724 # only change when there is an incompatible revision of the public API.
725 PERLIMPLIB *= ..\perl59$(a)
726 PERLDLL = ..\perl59.dll
728 XCOPY = xcopy /f /r /i /d
729 RCOPY = xcopy /f /r /i /e /d
733 # filenames given to xsubpp must have forward slashes (since it puts
734 # full pathnames in #line strings)
735 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
774 EXTRACORE_SRC += perllib.c
776 .IF "$(PERL_MALLOC)" == "define"
777 EXTRACORE_SRC += ..\malloc.c
780 EXTRACORE_SRC += ..\perlio.c
787 # We need this for miniperl build unless we override canned
788 # config.h #define building mini\*
789 #.IF "$(USE_PERLIO)" == "define"
790 WIN32_SRC += .\win32io.c
793 .IF "$(CRYPT_SRC)" != ""
794 WIN32_SRC += .\$(CRYPT_SRC)
797 DLL_SRC = $(DYNALOADER).c
844 .\include\sys\socket.h \
847 CORE_H = $(CORE_NOCFG_H) .\config.h
849 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
850 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
851 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
852 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
853 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
854 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
855 DLL_OBJ = $(DLL_SRC:db:+$(o))
856 X2P_OBJ = $(X2P_SRC:db:+$(o))
858 PERLDLL_OBJ = $(CORE_OBJ)
859 PERLEXE_OBJ = perlmain$(o)
861 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
863 .IF "$(USE_SETARGV)" != ""
864 SETARGV_OBJ = setargv$(o)
867 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
868 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
869 Sys/Hostname Storable Filter/Util/Call Encode \
870 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
871 Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32
875 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
877 POD2HTML = $(PODDIR)\pod2html
878 POD2MAN = $(PODDIR)\pod2man
879 POD2LATEX = $(PODDIR)\pod2latex
880 POD2TEXT = $(PODDIR)\pod2text
882 # vars must be separated by "\t+~\t+", since we're using the tempfile
883 # version of config_sh.pl (we were overflowing someone's buffer by
884 # trying to fit them all on the command line)
887 INST_DRV=$(INST_DRV) ~ \
888 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
889 INST_VER=$(INST_VER:s,\,$B,) ~ \
890 INST_ARCH=$(INST_ARCH) ~ \
891 archname=$(ARCHNAME) ~ \
894 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
895 cf_email=$(EMAIL) ~ \
896 d_crypt=$(D_CRYPT) ~ \
897 d_mymalloc=$(PERL_MALLOC) ~ \
898 libs=$(LIBFILES:f) ~ \
899 incpath=$(CCINCDIR:s,\,$B,) ~ \
900 libperl=$(PERLIMPLIB:f) ~ \
901 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
908 static_ext=$(STATIC_EXT) ~ \
909 usethreads=$(USE_ITHREADS) ~ \
910 useithreads=$(USE_ITHREADS) ~ \
911 usemultiplicity=$(USE_MULTI) ~ \
912 useperlio=$(USE_PERLIO) ~ \
913 uselargefiles=$(USE_LARGE_FILES) ~ \
914 usesitecustomize=$(USE_SITECUST) ~ \
915 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
919 # set up targets varying between Win95 and WinNT builds
922 .IF "$(IS_WIN95)" == "define"
924 RIGHTMAKE = __switch_makefiles
934 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
935 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
938 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
940 #----------------------------------------------------------------
942 #-------------------- BEGIN Win95 SPECIFIC ----------------------
944 # this target is a jump-off point for Win95
945 # 1. it switches to the Win95-specific makefile if it exists
946 # (__do_switch_makefiles)
947 # 2. it prints a message when the Win95-specific one finishes (__done)
948 # 3. it then kills this makefile by trying to make __no_such_target
950 __switch_makefiles: __do_switch_makefiles __done __no_such_target
952 __do_switch_makefiles:
953 .IF "$(NOTFIRST)" != "true"
954 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
959 .IF "$(NOTFIRST)" != "true"
961 @echo Build process complete. Ignore any errors after this message.
962 @echo Run "dmake test" to test and "dmake install" to install
965 # dummy targets for Win95-specific makefile
975 # This target is used to generate the new makefile (.\makefile.95) for Win95
977 .\makefile.95: .\makefile.mk
978 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
980 #--------------------- END Win95 SPECIFIC ---------------------
982 # a blank target for when builds don't need to do certain things
983 # this target added for Win95 port but used to keep the WinNT port able to
988 $(GLOBEXE) : perlglob$(o)
989 .IF "$(CCTYPE)" == "BORLAND"
990 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
991 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
992 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
993 .ELIF "$(CCTYPE)" == "GCC"
994 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
996 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
997 perlglob$(o) setargv$(o)
1000 perlglob$(o) : perlglob.c
1002 config.w32 : $(CFGSH_TMPL)
1003 copy $(CFGSH_TMPL) config.w32
1005 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1007 copy $(CFGH_TMPL) config.h
1009 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1010 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1011 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1013 # this target is for when changes to the main config.sh happen
1014 # edit config.{b,v,g}c and make this target once for each supported
1015 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1017 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1018 $(CFGSH_TMPL) > ..\config.sh
1019 -cd .. && del /f perl.exe
1020 -cd .. && del /f perl*.dll
1021 cd .. && perl configpm
1022 -del /f $(CFGH_TMPL)
1024 -perl config_h.PL "INST_VER=$(INST_VER)"
1025 rename config.h $(CFGH_TMPL)
1027 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1028 cd .. && miniperl configpm
1029 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1030 $(XCOPY) ..\*.h $(COREDIR)\*.*
1031 $(XCOPY) *.h $(COREDIR)\*.*
1032 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1033 $(RCOPY) include $(COREDIR)\*.*
1034 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1035 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1037 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1038 .IF "$(CCTYPE)" == "BORLAND"
1039 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1040 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1041 .ELIF "$(CCTYPE)" == "GCC"
1042 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1043 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1045 $(LINK32) -subsystem:console -out:$@ \
1046 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1050 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1052 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1053 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1055 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1056 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1058 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1059 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1060 # unless the .IF is true), so instead we use a .ELSE with the default.
1061 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1063 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1064 .IF "$(USE_IMP_SYS)" == "define"
1065 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1067 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1070 # 1. we don't want to rebuild miniperl.exe when config.h changes
1071 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1072 $(MINI_OBJ) : $(CORE_NOCFG_H)
1074 $(WIN32_OBJ) : $(CORE_H)
1076 $(CORE_OBJ) : $(CORE_H)
1078 $(DLL_OBJ) : $(CORE_H)
1080 $(X2P_OBJ) : $(CORE_H)
1082 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1083 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1084 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1085 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1087 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1088 .IF "$(CCTYPE)" == "BORLAND"
1089 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1090 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
1092 $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
1095 .ELIF "$(CCTYPE)" == "GCC"
1096 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1097 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1098 $(subst,\,$B $(shell @type Extensions_static)) \
1099 $(LIBFILES) $(LKPOST))
1100 dlltool --output-lib $(PERLIMPLIB) \
1101 --dllname $(PERLDLL:b).dll \
1103 --base-file perl.base \
1104 --output-exp perl.exp
1105 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1106 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1107 $(subst,\,$B $(shell @type Extensions_static)) \
1108 $(LIBFILES) perl.exp $(LKPOST))
1110 $(LINK32) -dll -def:perldll.def -out:$@ \
1111 @Extensions_static \
1112 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1113 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
1115 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1118 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1119 $(MINIPERL) makeico.pl > $@
1121 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1123 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1124 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1126 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1127 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1129 ..\x2p\hash$(o) : ..\x2p\hash.c
1130 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1132 ..\x2p\str$(o) : ..\x2p\str.c
1133 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1135 ..\x2p\util$(o) : ..\x2p\util.c
1136 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1138 ..\x2p\walk$(o) : ..\x2p\walk.c
1139 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1141 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1142 $(MINIPERL) ..\x2p\find2perl.PL
1143 $(MINIPERL) ..\x2p\s2p.PL
1144 .IF "$(CCTYPE)" == "BORLAND"
1145 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1146 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1147 .ELIF "$(CCTYPE)" == "GCC"
1148 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1149 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1151 $(LINK32) -subsystem:console -out:$@ \
1152 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1155 perlmain.c : runperl.c
1156 copy runperl.c perlmain.c
1158 perlmain$(o) : perlmain.c
1159 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1161 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1162 .IF "$(CCTYPE)" == "BORLAND"
1163 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1164 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
1166 $(PERLIMPLIB) $(LIBFILES)$N)
1167 .ELIF "$(CCTYPE)" == "GCC"
1168 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1169 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1171 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1172 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1174 copy $(PERLEXE) $(WPERLEXE)
1175 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1176 copy splittree.pl ..
1177 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1179 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1180 if not exist $(AUTODIR) mkdir $(AUTODIR)
1181 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1182 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1183 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1184 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1185 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1186 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1188 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1189 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1191 #-------------------------------------------------------------------------------
1192 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1193 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1194 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1196 Extensions_static : buildext.pl
1197 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1198 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1199 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1202 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1203 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1205 Extensions_realclean :
1206 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1207 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1209 #-------------------------------------------------------------------------------
1213 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1214 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1215 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1217 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1218 # so please check that script before making structural changes here
1219 utils: $(PERLEXE) $(X2P)
1220 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1221 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1222 copy ..\README.aix ..\pod\perlaix.pod
1223 copy ..\README.amiga ..\pod\perlamiga.pod
1224 copy ..\README.apollo ..\pod\perlapollo.pod
1225 copy ..\README.beos ..\pod\perlbeos.pod
1226 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1227 copy ..\README.ce ..\pod\perlce.pod
1228 copy ..\README.cn ..\pod\perlcn.pod
1229 copy ..\README.cygwin ..\pod\perlcygwin.pod
1230 copy ..\README.dgux ..\pod\perldgux.pod
1231 copy ..\README.dos ..\pod\perldos.pod
1232 copy ..\README.epoc ..\pod\perlepoc.pod
1233 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1234 copy ..\README.hpux ..\pod\perlhpux.pod
1235 copy ..\README.hurd ..\pod\perlhurd.pod
1236 copy ..\README.irix ..\pod\perlirix.pod
1237 copy ..\README.jp ..\pod\perljp.pod
1238 copy ..\README.ko ..\pod\perlko.pod
1239 copy ..\README.machten ..\pod\perlmachten.pod
1240 copy ..\README.macos ..\pod\perlmacos.pod
1241 copy ..\README.macosx ..\pod\perlmacosx.pod
1242 copy ..\README.mint ..\pod\perlmint.pod
1243 copy ..\README.mpeix ..\pod\perlmpeix.pod
1244 copy ..\README.netware ..\pod\perlnetware.pod
1245 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1246 copy ..\README.os2 ..\pod\perlos2.pod
1247 copy ..\README.os390 ..\pod\perlos390.pod
1248 copy ..\README.os400 ..\pod\perlos400.pod
1249 copy ..\README.plan9 ..\pod\perlplan9.pod
1250 copy ..\README.qnx ..\pod\perlqnx.pod
1251 copy ..\README.solaris ..\pod\perlsolaris.pod
1252 copy ..\README.symbian ..\pod\perlsymbian.pod
1253 copy ..\README.tru64 ..\pod\perltru64.pod
1254 copy ..\README.tw ..\pod\perltw.pod
1255 copy ..\README.uts ..\pod\perluts.pod
1256 copy ..\README.vmesa ..\pod\perlvmesa.pod
1257 copy ..\README.vms ..\pod\perlvms.pod
1258 copy ..\README.vos ..\pod\perlvos.pod
1259 copy ..\README.win32 ..\pod\perlwin32.pod
1260 copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
1261 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1262 cd ..\lib && $(PERLEXE) lib_pm.PL
1263 $(PERLEXE) $(PL2BAT) $(UTILS)
1265 # Note that the pod cleanup in this next section is parsed (and regenerated
1266 # by pod/buildtoc so please check that script before making changes here
1268 # the doubled rmdir calls are needed because older cmd shells
1269 # don't understand /q
1270 distclean: realclean
1271 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1272 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1274 -del /f $(DYNALOADER).c
1275 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1276 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1277 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1278 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1279 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1280 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1281 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1282 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1283 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1284 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1285 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1286 -del /f $(LIBDIR)\ByteLoader.pm
1287 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1288 -del /f $(LIBDIR)\Devel\PPPort.pm
1289 -del /f $(LIBDIR)\File\Glob.pm
1290 -del /f $(LIBDIR)\Storable.pm
1291 -del /f $(LIBDIR)\Digest\MD5.pm
1292 -del /f $(LIBDIR)\PerlIO\encoding.pm
1293 -del /f $(LIBDIR)\PerlIO\scalar.pm
1294 -del /f $(LIBDIR)\PerlIO\via.pm
1295 -del /f $(LIBDIR)\Sys\Hostname.pm
1296 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1297 -del /f $(LIBDIR)\threads\shared.pm
1298 -del /f $(LIBDIR)\Time\HiRes.pm
1299 -del /f $(LIBDIR)\Unicode\Normalize.pm
1300 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1301 -del /f $(LIBDIR)\Win32.pm
1302 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1303 -if exist $(LIBDIR)\IO\Socket rmdir /s $(LIBDIR)\IO\Socket
1304 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1305 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1306 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1307 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1308 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1309 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1310 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1311 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1312 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1313 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1314 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1315 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1316 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1317 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1318 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1319 -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
1320 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1321 -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
1322 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1323 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1324 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1325 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1326 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1327 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1328 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1329 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1330 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1331 perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
1332 perlplan9.pod perlqnx.pod perlsolaris.pod perlsymbian.pod \
1333 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
1334 perlvms.pod perlvos.pod perlwin32.pod \
1335 pod2html pod2latex pod2man pod2text pod2usage \
1336 podchecker podselect
1337 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1338 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1339 xsubpp instmodsh prove ptar corelist
1340 -cd ..\x2p && del /f find2perl s2p psed *.bat
1341 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1345 -del /f $(PERLEXE_ICO) perl.base
1346 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
1347 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1348 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1349 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1350 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1351 -if exist $(COREDIR) rmdir /s $(COREDIR)
1353 install : all installbare installhtml
1355 installbare : $(RIGHTMAKE) utils
1356 $(PERLEXE) ..\installperl
1357 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1358 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1359 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1360 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1361 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1364 $(RCOPY) html\*.* $(INST_HTML)\*.*
1366 inst_lib : $(CONFIGPM)
1367 copy splittree.pl ..
1368 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1369 $(RCOPY) ..\lib $(INST_LIB)\*.*
1371 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1372 cd ..\lib\unicore && \
1373 ..\$(MINIPERL) -I.. mktables
1375 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1376 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1377 if exist ..\t\perl.exe del /f ..\t\perl.exe
1378 rename ..\t\miniperl.exe perl.exe
1379 .IF "$(CCTYPE)" == "BORLAND"
1380 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1382 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1386 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1388 test-prep : all utils
1389 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1390 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1391 .IF "$(CCTYPE)" == "BORLAND"
1392 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1394 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1397 test : $(RIGHTMAKE) test-prep
1398 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1400 test-notty : test-prep
1401 set PERL_SKIP_TTY_TEST=1 && \
1402 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1404 _test : $(RIGHTMAKE)
1405 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1406 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1407 .IF "$(CCTYPE)" == "BORLAND"
1408 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1410 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1412 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1414 # the doubled rmdir calls are needed because older cmd shells
1415 # don't understand /q
1417 -@erase miniperlmain$(o)
1419 -@erase perlglob$(o)
1420 -@erase perlmain$(o)
1428 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1429 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1430 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1431 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1432 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1433 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1434 -@erase $(UNIDATAFILES)
1435 -@erase $(WIN32_OBJ)
1438 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1439 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1440 -@erase ..\x2p\*.exe ..\x2p\*.bat
1444 -@erase Extensions_static
1446 clean : Extensions_clean _clean
1448 realclean : Extensions_realclean _clean
1450 # Handy way to run perlbug -ok without having to install and run the
1451 # installed perlbug. We don't re-run the tests here - we trust the user.
1452 # Please *don't* use this unless all tests pass.
1453 # If you want to report test failures, use "dmake nok" instead.
1455 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1458 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1461 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1464 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok