2 # Makefile to build perl on Windows NT using DMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
6 # Mingw32 with gcc-2.95.2 or better **experimental**
7 # MS Platform SDK 64-bit compiler and tools **experimental**
9 # This is set up to build a perl.exe that runs off a shared library
10 # (perl59.dll). Also makes individual DLLs for the XS extensions.
14 ## Make sure you read README.win32 *before* you mess with anything here!
18 ## Build configuration. Edit the values below to suit your needs.
22 # Set these to wherever you want "dmake install" to put your
26 INST_TOP *= $(INST_DRV)\perl
29 # Comment this out if you DON'T want your perl installation to be versioned.
30 # This means that the new installation will overwrite any files from the
31 # old installation at the same INST_TOP location. Leaving it enabled is
32 # the safest route, as perl adds the extra version directory to all the
33 # locations it installs files to. If you disable it, an alternative
34 # versioned installation can be obtained by setting INST_TOP above to a
35 # path that includes an arbitrary version string.
40 # Comment this out if you DON'T want your perl installation to have
41 # architecture specific components. This means that architecture-
42 # specific files will be installed along with the architecture-neutral
43 # files. Leaving it enabled is safer and more flexible, in case you
44 # want to build multiple flavors of perl and install them together in
45 # the same location. Commenting it out gives you a simpler
46 # installation that is easier to understand for beginners.
48 #INST_ARCH *= \$(ARCHNAME)
51 # Uncomment this if you want perl to run
52 # $Config{sitelibexp}\sitecustomize.pl
53 # before anything else. This script can then be set up, for example,
54 # to add additional entries to @INC.
56 #USE_SITECUST *= define
59 # uncomment to enable multiple interpreters. This is need for fork()
60 # emulation and for thread support.
65 # Interpreter cloning/threads; now reasonably complete.
66 # This should be enabled to get the fork() emulation.
67 # This needs USE_MULTI above.
69 USE_ITHREADS *= define
72 # uncomment to enable the implicit "host" layer for all system calls
73 # made by perl. This needs USE_MULTI above.
74 # This is also needed to get fork().
79 # Comment out next assign to disable perl's I/O subsystem and use compiler's
80 # stdio for IO - depending on your compiler vendor and run time library you may
81 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
82 # You will also be unable to take full advantage of perl5.8's support for multiple
83 # encodings and may see lower IO performance. You have been warned.
87 # Comment this out if you don't want to enable large file support for
88 # some reason. Should normally only be changed to maintain compatibility
89 # with an older release of perl.
90 USE_LARGE_FILES *= define
93 # uncomment exactly one of the following
97 # Visual C++ > 2.x and < 6.x
101 # Borland 5.02 or later
103 # MinGW with gcc-2.95.2 or later
107 # uncomment this if your Borland compiler is older than v5.4.
110 # uncomment this if you want to use Borland's VCL as your CRT
114 # uncomment this if you are compiling under Windows 95/98 and command.com
115 # (not needed if you're running under 4DOS/NT 6.01 or later)
119 # uncomment next line if you want debug version of perl (big,slow)
120 # If not enabled, we automatically try to use maximum optimization
121 # with all compilers that are known to have a working optimizer.
126 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
127 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
128 # This currently requires VC 5.0 with Service Pack 3 or later.
129 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
130 # and follow the directions in the package to install.
132 # Not recommended if you have VC 6.x and you're not running Windows 9x.
134 #USE_PERLCRT *= define
137 # uncomment to enable linking with setargv.obj under the Visual C
138 # compiler. Setting this options enables perl to expand wildcards in
139 # arguments, but it may be harder to use alternate methods like
140 # File::DosGlob that are more powerful. This option is supported only with
143 #USE_SETARGV *= define
146 # if you want to have the crypt() builtin function implemented, leave this or
147 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
148 # version of des_fcrypt().
150 CRYPT_SRC *= fcrypt.c
153 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
154 # library, uncomment this, and make sure the library exists (see README.win32)
155 # Specify the full pathname of the library.
157 #CRYPT_LIB *= fcrypt.lib
160 # set this if you wish to use perl's malloc
161 # WARNING: Turning this on/off WILL break binary compatibility with extensions
162 # you may have compiled with/without it. Be prepared to recompile all
163 # extensions if you change the default. Currently, this cannot be enabled
164 # if you ask for USE_IMP_SYS above.
166 #PERL_MALLOC *= define
169 # set this to enable debugging mstats
170 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
171 # be enabled without PERL_MALLOC as well.
173 #DEBUG_MSTATS *= define
176 # set the install locations of the compiler include/libraries
177 # Running VCVARS32.BAT is *required* when using Visual C.
178 # Some versions of Visual C don't define MSVCDIR in the environment,
179 # so you may have to set CCHOME explicitly (spaces in the path name should
182 .IF "$(CCTYPE)" == "BORLAND"
183 CCHOME *= C:\borland\bcc55
184 .ELIF "$(CCTYPE)" == "GCC"
189 CCINCDIR *= $(CCHOME)\include
190 CCLIBDIR *= $(CCHOME)\lib
193 # Additional compiler flags can be specified here.
195 BUILDOPT *= $(BUILDOPTEXTRA)
198 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
199 # internal hash function unless the PERL_HASH_SEED environment variable is set.
200 # Alternatively, adding -DNO_HASH_SEED will completely disable the
201 # randomization feature.
202 # The latter is required to maintain binary compatibility with Perl 5.8.0.
204 #BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
205 #BUILDOPT += -DNO_HASH_SEED
208 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
209 # for old symbols by default, at the expense of extreme pollution. You most
210 # probably just want to build modules that won't compile with
211 # perl Makefile.PL POLLUTE=1
212 # instead of enabling this. Please report such modules to the respective
215 #BUILDOPT += -DPERL_POLLUTE
218 # This should normally be disabled. Enabling it will disable the File::Glob
219 # implementation of CORE::glob.
221 #BUILDOPT += -DPERL_EXTERNAL_GLOB
224 # This should normally be disabled. Enabling it causes perl to read scripts
225 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
227 #BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
230 # specify semicolon-separated list of extra directories that modules will
231 # look for libraries (spaces in path names need not be quoted)
236 # set this to point to cmd.exe (only needed if you use some
237 # alternate shell that doesn't grok cmd.exe style commands)
239 #SHELL *= g:\winnt\system32\cmd.exe
242 # set this to your email address (perl will guess a value from
243 # from your loginname and your hostname, which may not be right)
248 ## Build configuration ends.
251 ##################### CHANGE THESE ONLY IF YOU MUST #####################
253 .IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
257 CRYPT_FLAG = -DHAVE_DES_FCRYPT
261 DEBUG_MSTATS *= undef
263 USE_SITECUST *= undef
265 USE_ITHREADS *= undef
268 USE_LARGE_FILES *= undef
271 .IF "$(USE_IMP_SYS)" == "define"
275 .IF "$(PERL_MALLOC)" == "undef"
279 .IF "$(DEBUG_MSTATS)" == "define"
280 BUILDOPT += -DPERL_DEBUGGING_MSTATS
283 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
287 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
291 .IF "$(USE_SITECUST)" == "define"
292 BUILDOPT += -DUSE_SITECUSTOMIZE
295 .IF "$(USE_MULTI)" != "undef"
296 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
299 .IF "$(USE_IMP_SYS)" != "undef"
300 BUILDOPT += -DPERL_IMPLICIT_SYS
303 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
305 PROCESSOR_ARCHITECTURE *= x86
308 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
309 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
311 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
318 .IF "$(USE_MULTI)" == "define"
319 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
321 .IF "$(USE_PERLIO)" == "define"
322 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
324 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
326 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
329 .IF "$(USE_ITHREADS)" == "define"
330 ARCHNAME !:= $(ARCHNAME)-thread
333 # Visual Studio 98 specific
334 .IF "$(CCTYPE)" == "MSVC60"
336 # VC 6.0 can load the socket dll on demand. Makes the test suite
337 # run in about 10% less time.
338 DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
340 .IF "$(CFG)" == "Debug"
342 # VC 6.0 seems capable of compiling perl correctly with optimizations
343 # enabled. Anything earlier fails tests.
348 ARCHDIR = ..\lib\$(ARCHNAME)
349 COREDIR = ..\lib\CORE
350 AUTODIR = ..\lib\auto
354 EXTUTILSDIR = $(LIBDIR)\ExtUtils
357 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
358 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
359 INST_LIB = $(INST_TOP)$(INST_VER)\lib
360 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
361 INST_COREDIR = $(INST_ARCHLIB)\CORE
362 INST_POD = $(INST_LIB)\pod
363 INST_HTML = $(INST_TOP)$(INST_VER)\html
366 # Programs to compile, build .lib files and link
371 .IF "$(CCTYPE)" == "BORLAND"
374 .IF "$(BCCOLD)" != "define"
386 INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
387 #PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
388 DEFINES = -DWIN32 $(CRYPT_FLAG)
389 LOCDEFS = -DPERLDLL -DPERL_CORE
394 LIBFILES = $(CRYPT_LIB) ws2_32.lib import32.lib $(LIBC)
396 .IF "$(CFG)" == "Debug"
397 OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
400 OPTIMIZE = -O2 -D_RTLDLL
404 CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
405 $(PCHFLAGS) $(OPTIMIZE)
406 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
410 .IF "$(BCCOLD)" != "define"
412 DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
414 .IF "$(BCCVCL)" == "define"
415 LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
416 LINK_FLAGS += -L"$(CCLIBDIR)\Release"
420 .ELIF "$(CCTYPE)" == "GCC"
436 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
437 DEFINES = -DWIN32 $(CRYPT_FLAG)
438 LOCDEFS = -DPERLDLL -DPERL_CORE
445 LIBFILES = $(CRYPT_LIB) $(LIBC) \
446 -lmoldname -lkernel32 -luser32 -lgdi32 \
447 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
448 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
449 -lwinmm -lversion -lodbc32
451 .IF "$(CFG)" == "Debug"
452 OPTIMIZE = -g -O2 -DDEBUGGING
459 CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
460 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
465 # NOTE: we assume that GCC uses MSVCRT.DLL
466 BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
472 LIB32 = $(LINK32) -lib
479 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
480 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
481 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
482 LOCDEFS = -DPERLDLL -DPERL_CORE
486 .IF "$(USE_PERLCRT)" != "define"
492 .IF "$(CFG)" == "Debug"
493 .IF "$(CCTYPE)" == "MSVC20"
494 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
496 OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
500 OPTIMIZE = -MD -Zi -DNDEBUG
501 # we enable debug symbols in release builds also
502 LINK_DBG = -debug -opt:ref,icf
503 # you may want to enable this if you want COFF symbols in the executables
504 # in addition to the PDB symbols. The default Dr. Watson that ships with
505 # Windows can use the the former but not latter. The free WinDbg can be
506 # installed to get better stack traces from just the PDB symbols, so we
507 # avoid the bloat of COFF symbols by default.
508 #LINK_DBG = $(LINK_DBG) -debugtype:both
509 .IF "$(WIN64)" == "define"
510 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
514 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
520 .IF "$(WIN64)" == "define"
521 DEFINES += -DWIN64 -DCONSERVATIVE
522 OPTIMIZE += -Wp64 -Op
525 .IF "$(USE_PERLCRT)" != "define"
526 BUILDOPT += -DPERL_MSVCRT_READFIX
529 LIBBASEFILES = $(CRYPT_LIB) \
530 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
531 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
532 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
535 # win64 doesn't have some libs
536 .IF "$(WIN64)" != "define"
537 LIBBASEFILES += odbc32.lib odbccp32.lib
540 # we add LIBC here, since we may be using PerlCRT.dll
541 LIBFILES = $(LIBBASEFILES) $(LIBC)
543 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
544 $(PCHFLAGS) $(OPTIMIZE)
545 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
546 -libpath:"$(INST_COREDIR)" \
547 -machine:$(PROCESSOR_ARCHITECTURE)
554 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
556 # used to allow local linking flags that are not propogated into Config.pm,
560 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
562 #################### do not edit below this line #######################
563 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
565 # Some dmake's built with Borland C++, including Sarathy's one at:
566 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
567 # require backslashes to be doubled-up when written to $(mktmp) files.
568 # Other dmake's do not require this and would actually output a double
569 # backslash if they were doubled-up.
570 .IF "$(shell @type $(mktmp \\))"=="\\"
576 # There is a related issue with other escape sequences: Sarathy's old
577 # dmake automatically maps escape sequences like \n to their ASCII values
578 # when used in macros, while other dmake's only do so if this behaviour
579 # is explicitly requested with the :m modifier.
581 .IF "$(shell @type $(mktmp \n))"=="\n"
597 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
600 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
603 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
609 .IF "$(CCTYPE)" == "BORLAND"
610 $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
611 $(IMPLIB) $(*B).lib $@
612 .ELIF "$(CCTYPE)" == "GCC"
613 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
614 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
616 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
617 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
621 .IF "$(CCTYPE)" == "GCC"
622 $(RSC) --use-temp-file -i $< -o $@
629 MINIPERL = ..\miniperl.exe
631 PERLEXE = ..\perl.exe
632 WPERLEXE = ..\wperl.exe
633 GLOBEXE = ..\perlglob.exe
634 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
635 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
638 # Unicode data files generated by mktables
639 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
640 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
641 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
642 ..\lib\unicore\PVA.pl
644 # Directories of Unicode data files generated by mktables
645 UNIDATADIR1 = ..\lib\unicore\To
646 UNIDATADIR2 = ..\lib\unicore\lib
648 PERLEXE_ICO = .\perlexe.ico
649 PERLEXE_RES = .\perlexe.res
652 # Nominate a target which causes extensions to be re-built
653 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
654 # on and really only the interface - i.e. the .def file used to export symbols
656 PERLDEP = perldll.def
659 PL2BAT = bin\pl2bat.pl
660 GLOBBAT = bin\perlglob.bat
699 .IF "$(CCTYPE)" == "BORLAND"
701 CFGSH_TMPL = config.bc
702 CFGH_TMPL = config_H.bc
704 .ELIF "$(CCTYPE)" == "GCC"
706 CFGSH_TMPL = config.gc
707 CFGH_TMPL = config_H.gc
708 PERLIMPLIB = ..\libperl59$(a)
712 .IF "$(WIN64)" == "define"
713 CFGSH_TMPL = config.vc64
714 CFGH_TMPL = config_H.vc64
716 CFGSH_TMPL = config.vc
717 CFGH_TMPL = config_H.vc
722 # makedef.pl must be updated if this changes, and this should normally
723 # only change when there is an incompatible revision of the public API.
724 PERLIMPLIB *= ..\perl59$(a)
725 PERLDLL = ..\perl59.dll
727 XCOPY = xcopy /f /r /i /d
728 RCOPY = xcopy /f /r /i /e /d
732 # filenames given to xsubpp must have forward slashes (since it puts
733 # full pathnames in #line strings)
734 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
773 EXTRACORE_SRC += perllib.c
775 .IF "$(PERL_MALLOC)" == "define"
776 EXTRACORE_SRC += ..\malloc.c
779 EXTRACORE_SRC += ..\perlio.c
786 # We need this for miniperl build unless we override canned
787 # config.h #define building mini\*
788 #.IF "$(USE_PERLIO)" == "define"
789 WIN32_SRC += .\win32io.c
792 .IF "$(CRYPT_SRC)" != ""
793 WIN32_SRC += .\$(CRYPT_SRC)
796 DLL_SRC = $(DYNALOADER).c
843 .\include\sys\socket.h \
846 CORE_H = $(CORE_NOCFG_H) .\config.h
848 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
849 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
850 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
851 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
852 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
853 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
854 DLL_OBJ = $(DLL_SRC:db:+$(o))
855 X2P_OBJ = $(X2P_SRC:db:+$(o))
857 PERLDLL_OBJ = $(CORE_OBJ)
858 PERLEXE_OBJ = perlmain$(o)
860 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
862 .IF "$(USE_SETARGV)" != ""
863 SETARGV_OBJ = setargv$(o)
866 DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
867 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
868 Sys/Hostname Storable Filter/Util/Call Encode \
869 Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
870 Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32
874 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
876 POD2HTML = $(PODDIR)\pod2html
877 POD2MAN = $(PODDIR)\pod2man
878 POD2LATEX = $(PODDIR)\pod2latex
879 POD2TEXT = $(PODDIR)\pod2text
881 # vars must be separated by "\t+~\t+", since we're using the tempfile
882 # version of config_sh.pl (we were overflowing someone's buffer by
883 # trying to fit them all on the command line)
886 INST_DRV=$(INST_DRV) ~ \
887 INST_TOP=$(INST_TOP:s,\,$B,) ~ \
888 INST_VER=$(INST_VER:s,\,$B,) ~ \
889 INST_ARCH=$(INST_ARCH) ~ \
890 archname=$(ARCHNAME) ~ \
893 ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
894 cf_email=$(EMAIL) ~ \
895 d_crypt=$(D_CRYPT) ~ \
896 d_mymalloc=$(PERL_MALLOC) ~ \
897 libs=$(LIBFILES:f) ~ \
898 incpath=$(CCINCDIR:s,\,$B,) ~ \
899 libperl=$(PERLIMPLIB:f) ~ \
900 libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
907 static_ext=$(STATIC_EXT) ~ \
908 usethreads=$(USE_ITHREADS) ~ \
909 useithreads=$(USE_ITHREADS) ~ \
910 usemultiplicity=$(USE_MULTI) ~ \
911 useperlio=$(USE_PERLIO) ~ \
912 uselargefiles=$(USE_LARGE_FILES) ~ \
913 usesitecustomize=$(USE_SITECUST) ~ \
914 LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
918 # set up targets varying between Win95 and WinNT builds
921 .IF "$(IS_WIN95)" == "define"
923 RIGHTMAKE = __switch_makefiles
933 all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
934 $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
937 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
939 #----------------------------------------------------------------
941 #-------------------- BEGIN Win95 SPECIFIC ----------------------
943 # this target is a jump-off point for Win95
944 # 1. it switches to the Win95-specific makefile if it exists
945 # (__do_switch_makefiles)
946 # 2. it prints a message when the Win95-specific one finishes (__done)
947 # 3. it then kills this makefile by trying to make __no_such_target
949 __switch_makefiles: __do_switch_makefiles __done __no_such_target
951 __do_switch_makefiles:
952 .IF "$(NOTFIRST)" != "true"
953 if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
958 .IF "$(NOTFIRST)" != "true"
960 @echo Build process complete. Ignore any errors after this message.
961 @echo Run "dmake test" to test and "dmake install" to install
964 # dummy targets for Win95-specific makefile
974 # This target is used to generate the new makefile (.\makefile.95) for Win95
976 .\makefile.95: .\makefile.mk
977 $(MINIPERL) genmk95.pl makefile.mk $(MK2)
979 #--------------------- END Win95 SPECIFIC ---------------------
981 # a blank target for when builds don't need to do certain things
982 # this target added for Win95 port but used to keep the WinNT port able to
987 $(GLOBEXE) : perlglob$(o)
988 .IF "$(CCTYPE)" == "BORLAND"
989 $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
990 $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
991 "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
992 .ELIF "$(CCTYPE)" == "GCC"
993 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
995 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
996 perlglob$(o) setargv$(o)
999 perlglob$(o) : perlglob.c
1001 config.w32 : $(CFGSH_TMPL)
1002 copy $(CFGSH_TMPL) config.w32
1004 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1006 copy $(CFGH_TMPL) config.h
1008 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1009 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1010 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1012 # this target is for when changes to the main config.sh happen
1013 # edit config.{b,v,g}c and make this target once for each supported
1014 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
1016 perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1017 $(CFGSH_TMPL) > ..\config.sh
1018 -cd .. && del /f perl.exe
1019 -cd .. && del /f perl*.dll
1020 cd .. && perl configpm
1021 -del /f $(CFGH_TMPL)
1023 -perl config_h.PL "INST_VER=$(INST_VER)"
1024 rename config.h $(CFGH_TMPL)
1026 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1027 cd .. && miniperl configpm
1028 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1029 $(XCOPY) ..\*.h $(COREDIR)\*.*
1030 $(XCOPY) *.h $(COREDIR)\*.*
1031 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1032 $(RCOPY) include $(COREDIR)\*.*
1033 $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
1034 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1036 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1037 .IF "$(CCTYPE)" == "BORLAND"
1038 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1039 @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1040 .ELIF "$(CCTYPE)" == "GCC"
1041 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1042 $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1044 $(LINK32) -subsystem:console -out:$@ \
1045 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
1049 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1051 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1052 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
1054 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1055 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
1057 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1058 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1059 # unless the .IF is true), so instead we use a .ELSE with the default.
1060 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1062 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1063 .IF "$(USE_IMP_SYS)" == "define"
1064 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1066 $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1069 # 1. we don't want to rebuild miniperl.exe when config.h changes
1070 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1071 $(MINI_OBJ) : $(CORE_NOCFG_H)
1073 $(WIN32_OBJ) : $(CORE_H)
1075 $(CORE_OBJ) : $(CORE_H)
1077 $(DLL_OBJ) : $(CORE_H)
1079 $(X2P_OBJ) : $(CORE_H)
1081 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1082 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1083 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1084 $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
1086 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1087 .IF "$(CCTYPE)" == "BORLAND"
1088 $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
1089 @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
1094 .ELIF "$(CCTYPE)" == "GCC"
1095 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1096 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1097 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
1098 $(LIBFILES) $(LKPOST))
1099 dlltool --output-lib $(PERLIMPLIB) \
1100 --dllname $(PERLDLL:b).dll \
1102 --base-file perl.base \
1103 --output-exp perl.exp
1104 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1105 $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
1106 $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
1107 $(LIBFILES) perl.exp $(LKPOST))
1109 $(LINK32) -dll -def:perldll.def -out:$@ \
1110 @Extensions_static \
1111 @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
1112 $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
1114 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1117 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1118 $(MINIPERL) makeico.pl > $@
1120 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1122 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1123 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1125 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1126 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1128 ..\x2p\hash$(o) : ..\x2p\hash.c
1129 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1131 ..\x2p\str$(o) : ..\x2p\str.c
1132 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1134 ..\x2p\util$(o) : ..\x2p\util.c
1135 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1137 ..\x2p\walk$(o) : ..\x2p\walk.c
1138 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1140 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1141 $(MINIPERL) ..\x2p\find2perl.PL
1142 $(MINIPERL) ..\x2p\s2p.PL
1143 .IF "$(CCTYPE)" == "BORLAND"
1144 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1145 @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
1146 .ELIF "$(CCTYPE)" == "GCC"
1147 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1148 $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
1150 $(LINK32) -subsystem:console -out:$@ \
1151 @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
1154 perlmain.c : runperl.c
1155 copy runperl.c perlmain.c
1157 perlmain$(o) : perlmain.c
1158 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1160 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1161 .IF "$(CCTYPE)" == "BORLAND"
1162 $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
1163 @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
1165 $(PERLIMPLIB) $(LIBFILES)$N)
1166 .ELIF "$(CCTYPE)" == "GCC"
1167 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1168 $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
1170 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
1171 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1173 copy $(PERLEXE) $(WPERLEXE)
1174 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1175 copy splittree.pl ..
1176 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1178 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1179 if not exist $(AUTODIR) mkdir $(AUTODIR)
1180 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1181 cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1182 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1183 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1184 cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
1185 $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
1187 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1188 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1190 #-------------------------------------------------------------------------------
1191 Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
1192 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1193 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1195 Extensions_static : buildext.pl
1196 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1197 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1198 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1201 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1202 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1204 Extensions_realclean :
1205 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1206 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1208 #-------------------------------------------------------------------------------
1212 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1213 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1214 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1216 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1217 # so please check that script before making structural changes here
1218 utils: $(PERLEXE) $(X2P)
1219 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1220 copy ..\vms\perlvms.pod ..\pod\perlvms.pod
1221 copy ..\README.aix ..\pod\perlaix.pod
1222 copy ..\README.amiga ..\pod\perlamiga.pod
1223 copy ..\README.apollo ..\pod\perlapollo.pod
1224 copy ..\README.beos ..\pod\perlbeos.pod
1225 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1226 copy ..\README.ce ..\pod\perlce.pod
1227 copy ..\README.cn ..\pod\perlcn.pod
1228 copy ..\README.cygwin ..\pod\perlcygwin.pod
1229 copy ..\README.dgux ..\pod\perldgux.pod
1230 copy ..\README.dos ..\pod\perldos.pod
1231 copy ..\README.epoc ..\pod\perlepoc.pod
1232 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1233 copy ..\README.hpux ..\pod\perlhpux.pod
1234 copy ..\README.hurd ..\pod\perlhurd.pod
1235 copy ..\README.irix ..\pod\perlirix.pod
1236 copy ..\README.jp ..\pod\perljp.pod
1237 copy ..\README.ko ..\pod\perlko.pod
1238 copy ..\README.machten ..\pod\perlmachten.pod
1239 copy ..\README.macos ..\pod\perlmacos.pod
1240 copy ..\README.macosx ..\pod\perlmacosx.pod
1241 copy ..\README.mint ..\pod\perlmint.pod
1242 copy ..\README.mpeix ..\pod\perlmpeix.pod
1243 copy ..\README.netware ..\pod\perlnetware.pod
1244 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1245 copy ..\README.os2 ..\pod\perlos2.pod
1246 copy ..\README.os390 ..\pod\perlos390.pod
1247 copy ..\README.os400 ..\pod\perlos400.pod
1248 copy ..\README.plan9 ..\pod\perlplan9.pod
1249 copy ..\README.qnx ..\pod\perlqnx.pod
1250 copy ..\README.solaris ..\pod\perlsolaris.pod
1251 copy ..\README.symbian ..\pod\perlsymbian.pod
1252 copy ..\README.tru64 ..\pod\perltru64.pod
1253 copy ..\README.tw ..\pod\perltw.pod
1254 copy ..\README.uts ..\pod\perluts.pod
1255 copy ..\README.vmesa ..\pod\perlvmesa.pod
1256 copy ..\README.vms ..\pod\perlvms.pod
1257 copy ..\README.vos ..\pod\perlvos.pod
1258 copy ..\README.win32 ..\pod\perlwin32.pod
1259 copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
1260 cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
1261 cd ..\lib && $(PERLEXE) lib_pm.PL
1262 $(PERLEXE) $(PL2BAT) $(UTILS)
1264 # Note that the pod cleanup in this next section is parsed (and regenerated
1265 # by pod/buildtoc so please check that script before making changes here
1267 # the doubled rmdir calls are needed because older cmd shells
1268 # don't understand /q
1269 distclean: realclean
1270 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1271 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
1273 -del /f $(DYNALOADER).c
1274 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1275 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1276 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1277 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1278 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1279 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1280 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1281 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1282 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1283 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1284 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1285 -del /f $(LIBDIR)\ByteLoader.pm
1286 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1287 -del /f $(LIBDIR)\Devel\PPPort.pm
1288 -del /f $(LIBDIR)\File\Glob.pm
1289 -del /f $(LIBDIR)\Storable.pm
1290 -del /f $(LIBDIR)\Digest\MD5.pm
1291 -del /f $(LIBDIR)\PerlIO\encoding.pm
1292 -del /f $(LIBDIR)\PerlIO\scalar.pm
1293 -del /f $(LIBDIR)\PerlIO\via.pm
1294 -del /f $(LIBDIR)\Sys\Hostname.pm
1295 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1296 -del /f $(LIBDIR)\threads\shared.pm
1297 -del /f $(LIBDIR)\Time\HiRes.pm
1298 -del /f $(LIBDIR)\Unicode\Normalize.pm
1299 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1300 -del /f $(LIBDIR)\Win32.pm
1301 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1302 -if exist $(LIBDIR)\IO\Socket rmdir /s $(LIBDIR)\IO\Socket
1303 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1304 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1305 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1306 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1307 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1308 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1309 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1310 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1311 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1312 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1313 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1314 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1315 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1316 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1317 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1318 -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
1319 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1320 -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
1321 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1322 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1323 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1324 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1325 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1326 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1327 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1328 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1329 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1330 perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
1331 perlplan9.pod perlqnx.pod perlsolaris.pod perlsymbian.pod \
1332 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
1333 perlvms.pod perlvos.pod perlwin32.pod \
1334 pod2html pod2latex pod2man pod2text pod2usage \
1335 podchecker podselect
1336 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1337 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1338 xsubpp instmodsh prove corelist
1339 -cd ..\x2p && del /f find2perl s2p psed *.bat
1340 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1344 -del /f $(PERLEXE_ICO) perl.base
1345 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1346 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1347 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1348 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1349 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1350 -if exist $(COREDIR) rmdir /s $(COREDIR)
1352 install : all installbare installhtml
1354 installbare : $(RIGHTMAKE) utils
1355 $(PERLEXE) ..\installperl
1356 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1357 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1358 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1359 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1360 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1363 $(RCOPY) html\*.* $(INST_HTML)\*.*
1365 inst_lib : $(CONFIGPM)
1366 copy splittree.pl ..
1367 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1368 $(RCOPY) ..\lib $(INST_LIB)\*.*
1370 $(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1371 cd ..\lib\unicore && \
1372 ..\$(MINIPERL) -I.. mktables
1374 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1375 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1376 if exist ..\t\perl.exe del /f ..\t\perl.exe
1377 rename ..\t\miniperl.exe perl.exe
1378 .IF "$(CCTYPE)" == "BORLAND"
1379 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1381 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1385 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1387 test-prep : all utils
1388 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1389 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1390 .IF "$(CCTYPE)" == "BORLAND"
1391 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1393 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1396 test : $(RIGHTMAKE) test-prep
1397 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1399 test-notty : test-prep
1400 set PERL_SKIP_TTY_TEST=1 && \
1401 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1403 _test : $(RIGHTMAKE)
1404 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1405 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1406 .IF "$(CCTYPE)" == "BORLAND"
1407 $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
1409 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1411 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1413 # the doubled rmdir calls are needed because older cmd shells
1414 # don't understand /q
1416 -@erase miniperlmain$(o)
1418 -@erase perlglob$(o)
1419 -@erase perlmain$(o)
1427 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1428 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1429 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1430 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1431 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1432 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1433 -@erase $(UNIDATAFILES)
1434 -@erase $(WIN32_OBJ)
1437 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1438 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1439 -@erase ..\x2p\*.exe ..\x2p\*.bat
1442 -@erase Extensions_static
1444 clean : Extensions_clean _clean
1446 realclean : Extensions_realclean _clean
1448 # Handy way to run perlbug -ok without having to install and run the
1449 # installed perlbug. We don't re-run the tests here - we trust the user.
1450 # Please *don't* use this unless all tests pass.
1451 # If you want to report test failures, use "dmake nok" instead.
1453 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1456 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1459 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1462 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok