2 * This file was produced by running the config_h.SH script, which
3 * gets its values from config.sh, which is generally produced by
6 * Feel free to modify any of this as the need arises. Note, however,
7 * that running config_h.SH again will wipe out any changes you've made.
8 * For a more permanent change edit config.sh and rerun config_h.SH.
10 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
14 * Package name : perl5
16 * Configuration time: undef
17 * Configured by : gsar
25 * This symbol holds the complete pathname to the sed program.
27 #define LOC_SED "" /**/
30 * This symbol holds the path of the bin directory where the package will
31 * be installed. Program must be prepared to deal with ~name substitution.
34 * This symbol is the filename expanded version of the BIN symbol, for
35 * programs that do not want to deal with that at run-time.
37 #define BIN "c:\\perl\\5.00470\\bin\\MSWin32-x86" /**/
38 #define BIN_EXP "c:\\perl\\5.00470\\bin\\MSWin32-x86" /**/
41 * This symbol contains the first part of the string which will invoke
42 * the C preprocessor on the standard input and produce to standard
43 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
44 * call a wrapper. See CPPRUN.
47 * This symbol contains the second part of the string which will invoke
48 * the C preprocessor on the standard input and produce to standard
49 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
50 * to specify standard input, otherwise the value is "".
56 * This symbol, if defined, indicates that the alarm routine is
59 /*#define HAS_ALARM /**/
62 * This symbol indicates the C compiler can check for function attributes,
63 * such as printf formats. This is normally only supported by GNU cc.
65 /*#define HASATTRIBUTE /**/
67 #define __attribute__(_arg_)
71 * This symbol is defined if the bcmp() routine is available to
72 * compare blocks of memory.
74 /*#define HAS_BCMP /**/
77 * This symbol is defined if the bcopy() routine is available to
78 * copy blocks of memory.
80 /*#define HAS_BCOPY /**/
83 * This symbol is defined if the bzero() routine is available to
84 * set a memory block to 0.
86 /*#define HAS_BZERO /**/
89 * This symbol, if defined, indicates that the chown routine is
92 /*#define HAS_CHOWN /**/
95 * This symbol, if defined, indicates that the chroot routine is
98 /*#define HAS_CHROOT /**/
101 * This symbol, if defined, indicates that the chsize routine is available
102 * to truncate files. You might need a -lx to get this routine.
104 #define HAS_CHSIZE /**/
107 * This symbol, if defined, indicates that this C compiler knows about
108 * the const type. There is no need to actually test for that symbol
109 * within your programs. The mere use of the "const" keyword will
110 * trigger the necessary tests.
112 #define HASCONST /**/
118 * This symbol, if defined, indicates that the crypt routine is available
119 * to encrypt passwords and the like.
121 /*#define HAS_CRYPT /**/
124 * This symbol, if defined, indicates that the cuserid routine is
125 * available to get character login names.
127 /*#define HAS_CUSERID /**/
130 * This symbol, if defined, indicates that this system's <float.h>
131 * or <limits.h> defines the symbol DBL_DIG, which is the number
132 * of significant digits in a double precision number. If this
133 * symbol is not defined, a guess of 15 is usually pretty good.
135 #define HAS_DBL_DIG /**/
138 * This symbol, if defined, indicates that the difftime routine is
141 #define HAS_DIFFTIME /**/
144 * This symbol, if defined, indicates that the dlerror routine is
145 * available to return a string describing the last error that
146 * occurred from a call to dlopen(), dlclose() or dlsym().
148 #define HAS_DLERROR /**/
150 /* SETUID_SCRIPTS_ARE_SECURE_NOW:
151 * This symbol, if defined, indicates that the bug that prevents
152 * setuid scripts from being secure is not present in this kernel.
155 * This symbol, if defined, indicates that the C program should
156 * check the script that it is executing for setuid/setgid bits, and
157 * attempt to emulate setuid/setgid on systems that have disabled
158 * setuid #! scripts because the kernel can't do it securely.
159 * It is up to the package designer to make sure that this emulation
160 * is done securely. Among other things, it should do an fstat on
161 * the script it just opened to make sure it really is a setuid/setgid
162 * script, it should make sure the arguments passed correspond exactly
163 * to the argument on the #! line, and it should not trust any
164 * subprocesses to which it must pass the filename rather than the
165 * file descriptor of the script to be executed.
167 /*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
168 /*#define DOSUID /**/
171 * This symbol, if defined, indicates that the dup2 routine is
172 * available to duplicate file descriptors.
174 #define HAS_DUP2 /**/
177 * This symbol, if defined, indicates that the fchmod routine is available
178 * to change mode of opened files. If unavailable, use chmod().
180 /*#define HAS_FCHMOD /**/
183 * This symbol, if defined, indicates that the fchown routine is available
184 * to change ownership of opened files. If unavailable, use chown().
186 /*#define HAS_FCHOWN /**/
189 * This symbol, if defined, indicates to the C program that
190 * the fcntl() function exists.
192 /*#define HAS_FCNTL /**/
195 * This symbol, if defined, indicates that the fgetpos routine is
196 * available to get the file position indicator, similar to ftell().
198 #define HAS_FGETPOS /**/
201 * This symbol, if defined, indicates that the system supports filenames
202 * longer than 14 characters.
204 #define FLEXFILENAMES /**/
207 * This symbol, if defined, indicates that the flock routine is
208 * available to do file locking.
210 #define HAS_FLOCK /**/
213 * This symbol, if defined, indicates that the fork routine is
216 /*#define HAS_FORK /**/
219 * This symbol, if defined, indicates that the fsetpos routine is
220 * available to set the file position indicator, similar to fseek().
222 #define HAS_FSETPOS /**/
225 * This symbol, if defined, indicates that the gettimeofday() system
226 * call is available for a sub-second accuracy clock. Usually, the file
227 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
228 * The type "Timeval" should be used to refer to "struct timeval".
230 /*#define HAS_GETTIMEOFDAY /**/
231 #ifdef HAS_GETTIMEOFDAY
232 #define Timeval struct timeval /* Structure used by gettimeofday() */
236 * This symbol, if defined, indicates that the getgroups() routine is
237 * available to get the list of process groups. If unavailable, multiple
238 * groups are probably not supported.
240 /*#define HAS_GETGROUPS /**/
243 * This symbol, if defined, indicates that the C program may use the
244 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
247 /*#define HAS_UNAME /**/
250 * This symbol, if defined, indicates that the getlogin routine is
251 * available to get the login name.
253 #define HAS_GETLOGIN /**/
256 * This symbol, if defined, indicates to the C program that
257 * the getpgid(pid) function is available to get the
260 /*#define HAS_GETPGID /**/
263 * This symbol, if defined, indicates that the getpgrp routine is
264 * available to get the current process group.
267 * This symbol, if defined, indicates that getpgrp needs one
268 * arguments whereas USG one needs none.
270 /*#define HAS_GETPGRP /**/
271 /*#define USE_BSD_GETPGRP /**/
274 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
275 * routine is available to get the current process group.
277 /*#define HAS_GETPGRP2 /**/
280 * This symbol, if defined, indicates that the getppid routine is
281 * available to get the parent process ID.
283 /*#define HAS_GETPPID /**/
286 * This symbol, if defined, indicates that the getpriority routine is
287 * available to get a process's priority.
289 /*#define HAS_GETPRIORITY /**/
292 * This symbol, if defined, indicates that the htonl() routine (and
293 * friends htons() ntohl() ntohs()) are available to do network
294 * order byte swapping.
297 * This symbol, if defined, indicates that the htons() routine (and
298 * friends htonl() ntohl() ntohs()) are available to do network
299 * order byte swapping.
302 * This symbol, if defined, indicates that the ntohl() routine (and
303 * friends htonl() htons() ntohs()) are available to do network
304 * order byte swapping.
307 * This symbol, if defined, indicates that the ntohs() routine (and
308 * friends htonl() htons() ntohl()) are available to do network
309 * order byte swapping.
311 #define HAS_HTONL /**/
312 #define HAS_HTONS /**/
313 #define HAS_NTOHL /**/
314 #define HAS_NTOHS /**/
317 * This symbol, if defined, indicates to the C program that the
318 * inet_aton() function is available to parse IP address "dotted-quad"
321 /*#define HAS_INET_ATON /**/
324 * This symbol, if defined, indicates that the killpg routine is available
325 * to kill process groups. If unavailable, you probably should use kill
326 * with a negative process number.
328 /*#define HAS_KILLPG /**/
331 * This symbol, if defined, indicates that the link routine is
332 * available to create hard links.
334 /*#define HAS_LINK /**/
337 * This symbol, if defined, indicates that the localeconv routine is
338 * available for numeric and monetary formatting conventions.
340 #define HAS_LOCALECONV /**/
343 * This symbol, if defined, indicates that the lockf routine is
344 * available to do file locking.
346 /*#define HAS_LOCKF /**/
349 * This symbol, if defined, indicates that the lstat routine is
350 * available to do file stats on symbolic links.
352 /*#define HAS_LSTAT /**/
355 * This symbol, if defined, indicates that the mblen routine is available
356 * to find the number of bytes in a multibye character.
358 #define HAS_MBLEN /**/
361 * This symbol, if defined, indicates that the mbstowcs routine is
362 * available to covert a multibyte string into a wide character string.
364 #define HAS_MBSTOWCS /**/
367 * This symbol, if defined, indicates that the mbtowc routine is available
368 * to covert a multibyte to a wide character.
370 #define HAS_MBTOWC /**/
373 * This symbol, if defined, indicates that the memcmp routine is available
374 * to compare blocks of memory.
376 #define HAS_MEMCMP /**/
379 * This symbol, if defined, indicates that the memcpy routine is available
380 * to copy blocks of memory.
382 #define HAS_MEMCPY /**/
385 * This symbol, if defined, indicates that the memmove routine is available
386 * to copy potentially overlapping blocks of memory. This should be used
387 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
390 #define HAS_MEMMOVE /**/
393 * This symbol, if defined, indicates that the memset routine is available
394 * to set blocks of memory.
396 #define HAS_MEMSET /**/
399 * This symbol, if defined, indicates that the mkdir routine is available
400 * to create directories. Otherwise you should fork off a new process to
403 #define HAS_MKDIR /**/
406 * This symbol, if defined, indicates that the mkfifo routine is
407 * available to create FIFOs. Otherwise, mknod should be able to
408 * do it for you. However, if mkfifo is there, mknod might require
409 * super-user privileges which mkfifo will not.
411 /*#define HAS_MKFIFO /**/
414 * This symbol, if defined, indicates that the mknod routine is
415 * available to create character and block special files. Otherwise,
416 * mknod should be able to do it for you. However, if mknod is there,
417 * mknod might require super-user privileges which mknod will not.
419 /*#define HAS_MKNOD /**/
422 * This symbol, if defined, indicates that the mktime routine is
425 #define HAS_MKTIME /**/
428 * This symbol, if defined, indicates that the entire msg*(2) library is
429 * supported (IPC mechanism based on message queues).
431 /*#define HAS_MSG /**/
434 * This symbol, if defined, indicates that the nice routine is
437 /*#define HAS_NICE /**/
440 * This symbol, if defined, indicates that pathconf() is available
441 * to determine file-system related limits and options associated
442 * with a given filename.
445 * This symbol, if defined, indicates that pathconf() is available
446 * to determine file-system related limits and options associated
447 * with a given open file descriptor.
449 /*#define HAS_PATHCONF /**/
450 /*#define HAS_FPATHCONF /**/
453 * This symbol, if defined, indicates that the pause routine is
454 * available to suspend a process until a signal is received.
456 #define HAS_PAUSE /**/
459 * This symbol, if defined, indicates that the pipe routine is
460 * available to create an inter-process channel.
462 #define HAS_PIPE /**/
465 * This symbol, if defined, indicates that the poll routine is
466 * available to poll active file descriptors. You may safely
467 * include <poll.h> when this symbol is defined.
469 /*#define HAS_POLL /**/
472 * This symbol, if defined, indicates that the readdir routine is
473 * available to read directory entries. You may have to include
474 * <dirent.h>. See I_DIRENT.
476 #define HAS_READDIR /**/
479 * This symbol, if defined, indicates that the seekdir routine is
480 * available. You may have to include <dirent.h>. See I_DIRENT.
482 #define HAS_SEEKDIR /**/
485 * This symbol, if defined, indicates that the telldir routine is
486 * available. You may have to include <dirent.h>. See I_DIRENT.
488 #define HAS_TELLDIR /**/
491 * This symbol, if defined, indicates that the rewinddir routine is
492 * available. You may have to include <dirent.h>. See I_DIRENT.
494 #define HAS_REWINDDIR /**/
497 * This symbol, if defined, indicates that the readlink routine is
498 * available to read the value of a symbolic link.
500 /*#define HAS_READLINK /**/
503 * This symbol, if defined, indicates that the rename routine is available
504 * to rename files. Otherwise you should do the unlink(), link(), unlink()
507 #define HAS_RENAME /**/
510 * This symbol, if defined, indicates that the rmdir routine is
511 * available to remove directories. Otherwise you should fork off a
512 * new process to exec /bin/rmdir.
514 #define HAS_RMDIR /**/
517 * This symbol, if defined, indicates that the select routine is
518 * available to select active file descriptors. If the timeout field
519 * is used, <sys/time.h> may need to be included.
521 #define HAS_SELECT /**/
524 * This symbol, if defined, indicates that the entire sem*(2) library is
527 /*#define HAS_SEM /**/
530 * This symbol, if defined, indicates that the setegid routine is available
531 * to change the effective gid of the current program.
533 /*#define HAS_SETEGID /**/
536 * This symbol, if defined, indicates that the seteuid routine is available
537 * to change the effective uid of the current program.
539 /*#define HAS_SETEUID /**/
542 * This symbol, if defined, indicates that the setlinebuf routine is
543 * available to change stderr or stdout from block-buffered or unbuffered
544 * to a line-buffered mode.
546 /*#define HAS_SETLINEBUF /**/
549 * This symbol, if defined, indicates that the setlocale routine is
550 * available to handle locale-specific ctype implementations.
552 #define HAS_SETLOCALE /**/
555 * This symbol, if defined, indicates that the setpgid(pid, gpid)
556 * routine is available to set process group ID.
558 /*#define HAS_SETPGID /**/
561 * This symbol, if defined, indicates that the setpgrp routine is
562 * available to set the current process group.
565 * This symbol, if defined, indicates that setpgrp needs two
566 * arguments whereas USG one needs none. See also HAS_SETPGID
567 * for a POSIX interface.
569 /*#define HAS_SETPGRP /**/
570 /*#define USE_BSD_SETPGRP /**/
573 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
574 * routine is available to set the current process group.
576 /*#define HAS_SETPGRP2 /**/
579 * This symbol, if defined, indicates that the setpriority routine is
580 * available to set a process's priority.
582 /*#define HAS_SETPRIORITY /**/
585 * This symbol, if defined, indicates that the setregid routine is
586 * available to change the real and effective gid of the current
590 * This symbol, if defined, indicates that the setresgid routine is
591 * available to change the real, effective and saved gid of the current
594 /*#define HAS_SETREGID /**/
595 /*#define HAS_SETRESGID /**/
598 * This symbol, if defined, indicates that the setreuid routine is
599 * available to change the real and effective uid of the current
603 * This symbol, if defined, indicates that the setresuid routine is
604 * available to change the real, effective and saved uid of the current
607 /*#define HAS_SETREUID /**/
608 /*#define HAS_SETRESUID /**/
611 * This symbol, if defined, indicates that the setrgid routine is available
612 * to change the real gid of the current program.
614 /*#define HAS_SETRGID /**/
617 * This symbol, if defined, indicates that the setruid routine is available
618 * to change the real uid of the current program.
620 /*#define HAS_SETRUID /**/
623 * This symbol, if defined, indicates that the setsid routine is
624 * available to set the process group ID.
626 /*#define HAS_SETSID /**/
629 * This symbol, if defined, indicates that the entire shm*(2) library is
632 /*#define HAS_SHM /**/
635 * This symbol holds the return type of the shmat() system call.
636 * Usually set to 'void *' or 'char *'.
638 /* HAS_SHMAT_PROTOTYPE:
639 * This symbol, if defined, indicates that the sys/shm.h includes
640 * a prototype for shmat(). Otherwise, it is up to the program to
641 * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
642 * but not always right so it should be emitted by the program only
643 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
645 #define Shmat_t void * /**/
646 /*#define HAS_SHMAT_PROTOTYPE /**/
649 * This symbol is defined if this system has a stat structure declaring
650 * st_blksize and st_blocks.
652 /*#define USE_STAT_BLOCKS /**/
655 * This symbol is defined to indicate that the strchr()/strrchr()
656 * functions are available for string searching. If not, try the
657 * index()/rindex() pair.
660 * This symbol is defined to indicate that the index()/rindex()
661 * functions are available for string searching.
663 #define HAS_STRCHR /**/
664 /*#define HAS_INDEX /**/
667 * This symbol, if defined, indicates that the strcoll routine is
668 * available to compare strings using collating information.
670 #define HAS_STRCOLL /**/
673 * This symbol, if defined, indicates that this C compiler knows how
674 * to copy structures. If undefined, you'll need to use a block copy
675 * routine of some sort instead.
677 #define USE_STRUCT_COPY /**/
680 * This symbol, if defined, indicates that the strerror routine is
681 * available to translate error numbers to strings. See the writeup
682 * of Strerror() in this file before you try to define your own.
685 * This symbol, if defined, indicates that the sys_errlist array is
686 * available to translate error numbers to strings. The extern int
687 * sys_nerr gives the size of that table.
690 * This preprocessor symbol is defined as a macro if strerror() is
691 * not available to translate error numbers to strings but sys_errlist[]
694 #define HAS_STRERROR /**/
695 #define HAS_SYS_ERRLIST /**/
696 #define Strerror(e) strerror(e)
699 * This symbol, if defined, indicates that the strtod routine is
700 * available to provide better numeric string conversion than atof().
702 #define HAS_STRTOD /**/
705 * This symbol, if defined, indicates that the strtol routine is available
706 * to provide better numeric string conversion than atoi() and friends.
708 #define HAS_STRTOL /**/
711 * This symbol, if defined, indicates that the strtoul routine is
712 * available to provide conversion of strings to unsigned long.
714 #define HAS_STRTOUL /**/
717 * This symbol, if defined, indicates that the strxfrm() routine is
718 * available to transform strings.
720 #define HAS_STRXFRM /**/
723 * This symbol, if defined, indicates that the symlink routine is available
724 * to create symbolic links.
726 /*#define HAS_SYMLINK /**/
729 * This symbol, if defined, indicates that the syscall routine is
730 * available to call arbitrary system calls. If undefined, that's tough.
732 /*#define HAS_SYSCALL /**/
735 * This symbol, if defined, indicates that sysconf() is available
736 * to determine system related limits and options.
738 /*#define HAS_SYSCONF /**/
741 * This symbol, if defined, indicates that the system routine is
742 * available to issue a shell command.
744 #define HAS_SYSTEM /**/
747 * This symbol, if defined, indicates that the tcgetpgrp routine is
748 * available to get foreground process group ID.
750 /*#define HAS_TCGETPGRP /**/
753 * This symbol, if defined, indicates that the tcsetpgrp routine is
754 * available to set foreground process group ID.
756 /*#define HAS_TCSETPGRP /**/
759 * This symbol, if defined, indicates that the truncate routine is
760 * available to truncate files.
762 /*#define HAS_TRUNCATE /**/
765 * This symbol, if defined, indicates that the tzname[] array is
766 * available to access timezone names.
768 #define HAS_TZNAME /**/
771 * This symbol, if defined, indicates that the umask routine is
772 * available to set and get the value of the file creation mask.
774 #define HAS_UMASK /**/
777 * This symbol, if defined, indicates that vfork() exists.
779 /*#define HAS_VFORK /**/
782 * This symbol, if defined, indicates that this C compiler knows about
783 * the volatile declaration.
785 #define HASVOLATILE /**/
791 * This symbol, if defined, indicates that wait4() exists.
793 /*#define HAS_WAIT4 /**/
796 * This symbol, if defined, indicates that the waitpid routine is
797 * available to wait for child process.
799 #define HAS_WAITPID /**/
802 * This symbol, if defined, indicates that the wcstombs routine is
803 * available to convert wide character strings to multibyte strings.
805 #define HAS_WCSTOMBS /**/
808 * This symbol, if defined, indicates that the wctomb routine is available
809 * to covert a wide character to a multibyte.
811 #define HAS_WCTOMB /**/
814 * This symbol, if defined, indicates that <dbm.h> exists and should
818 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
819 * should be included.
822 #define I_RPCSVC_DBM /**/
825 * This symbol, if defined, indicates to the C program that it should
826 * include <dirent.h>. Using this symbol also triggers the definition
827 * of the Direntry_t define which ends up being 'struct dirent' or
828 * 'struct direct' depending on the availability of <dirent.h>.
831 * This symbol, if defined, indicates to the C program that the length
832 * of directory entry names is provided by a d_namlen field. Otherwise
833 * you need to do strlen() on the d_name field.
836 * This symbol is set to 'struct direct' or 'struct dirent' depending on
837 * whether dirent is available or not. You should use this pseudo type to
838 * portably declare your directory entries.
840 #define I_DIRENT /**/
841 #define DIRNAMLEN /**/
842 #define Direntry_t struct direct
845 * This symbol, if defined, indicates that <dlfcn.h> exists and should
851 * This manifest constant tells the C program to include <fcntl.h>.
856 * This symbol, if defined, indicates to the C program that it should
857 * include <float.h> to get definition of symbols like DBL_MAX or
858 * DBL_MIN, i.e. machine dependent floating point values.
863 * This symbol, if defined, indicates to the C program that it should
869 * This symbol, if defined, indicates to the C program that it should
870 * include <limits.h> to get definition of symbols like WORD_BIT or
871 * LONG_MAX, i.e. machine dependant limitations.
873 #define I_LIMITS /**/
876 * This symbol, if defined, indicates to the C program that it should
877 * include <locale.h>.
879 #define I_LOCALE /**/
882 * This symbol, if defined, indicates to the C program that it should
888 * This symbol, if defined, indicates to the C program that it should
889 * include <memory.h>.
891 /*#define I_MEMORY /**/
894 * This symbol, if defined, indicates that <ndbm.h> exists and should
897 /*#define I_NDBM /**/
900 * This symbol, if defined, indicates that <net/errno.h> exists and
901 * should be included.
903 /*#define I_NET_ERRNO /**/
906 * This symbol, if defined, indicates to the C program that it should
907 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
909 /*#define I_NETINET_IN /**/
912 * This symbol, if defined, indicates to the C program that it should
915 /*#define I_SFIO /**/
918 * This symbol, if defined, indicates that <stddef.h> exists and should
921 #define I_STDDEF /**/
924 * This symbol, if defined, indicates that <stdlib.h> exists and should
927 #define I_STDLIB /**/
930 * This symbol, if defined, indicates to the C program that it should
931 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
933 #define I_STRING /**/
936 * This symbol, if defined, indicates to the C program that it should
937 * include <sys/dir.h>.
939 /*#define I_SYS_DIR /**/
942 * This symbol, if defined, indicates to the C program that it should
943 * include <sys/file.h> to get definition of R_OK and friends.
945 /*#define I_SYS_FILE /**/
948 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
949 * be included. Otherwise, include <sgtty.h> or <termio.h>.
951 /*#define I_SYS_IOCTL /**/
954 * This symbol, if defined, indicates to the C program that it should
955 * include <sys/ndir.h>.
957 /*#define I_SYS_NDIR /**/
960 * This symbol, if defined, indicates to the C program that it should
961 * include <sys/param.h>.
963 /*#define I_SYS_PARAM /**/
966 * This symbol, if defined, indicates to the C program that it should
967 * include <sys/resource.h>.
969 /*#define I_SYS_RESOURCE /**/
972 * This symbol, if defined, indicates to the C program that it should
973 * include <sys/select.h> in order to get definition of struct timeval.
975 /*#define I_SYS_SELECT /**/
978 * This symbol, if defined, indicates to the C program that it should
979 * include <sys/stat.h>.
981 #define I_SYS_STAT /**/
984 * This symbol, if defined, indicates to the C program that it should
985 * include <sys/times.h>.
987 /*#define I_SYS_TIMES /**/
990 * This symbol, if defined, indicates to the C program that it should
991 * include <sys/types.h>.
993 #define I_SYS_TYPES /**/
996 * This symbol, if defined, indicates to the C program that it should
997 * include <sys/un.h> to get UNIX domain socket definitions.
999 /*#define I_SYS_UN /**/
1002 * This symbol, if defined, indicates to the C program that it should
1003 * include <sys/wait.h>.
1005 /*#define I_SYS_WAIT /**/
1008 * This symbol, if defined, indicates that the program should include
1009 * <termio.h> rather than <sgtty.h>. There are also differences in
1010 * the ioctl() calls that depend on the value of this symbol.
1013 * This symbol, if defined, indicates that the program should include
1014 * the POSIX termios.h rather than sgtty.h or termio.h.
1015 * There are also differences in the ioctl() calls that depend on the
1016 * value of this symbol.
1019 * This symbol, if defined, indicates that the program should include
1020 * <sgtty.h> rather than <termio.h>. There are also differences in
1021 * the ioctl() calls that depend on the value of this symbol.
1023 /*#define I_TERMIO /**/
1024 /*#define I_TERMIOS /**/
1025 /*#define I_SGTTY /**/
1028 * This symbol, if defined, indicates to the C program that it should
1029 * include <unistd.h>.
1031 /*#define I_UNISTD /**/
1034 * This symbol, if defined, indicates to the C program that it should
1035 * include <utime.h>.
1037 #define I_UTIME /**/
1040 * This symbol, if defined, indicates to the C program that it should
1041 * include <values.h> to get definition of symbols like MINFLOAT or
1042 * MAXLONG, i.e. machine dependant limitations. Probably, you
1043 * should use <limits.h> instead, if it is available.
1045 /*#define I_VALUES /**/
1048 * This symbol, if defined, indicates that <stdarg.h> exists and should
1052 * This symbol, if defined, indicates to the C program that it should
1053 * include <varargs.h>.
1055 #define I_STDARG /**/
1056 /*#define I_VARARGS /**/
1059 * This symbol, if defined, indicates to the C program that it should
1062 /*#define I_VFORK /**/
1065 * This variable contains the return type of free(). It is usually
1066 * void, but occasionally int.
1069 * This symbol is the type of pointer returned by malloc and realloc.
1071 #define Malloc_t void * /**/
1072 #define Free_t void /**/
1075 * This symbol, if defined, indicates that we're using our own malloc.
1077 /*#define MYMALLOC /**/
1080 * If defined, this macro indicates that the C compiler can handle
1081 * function prototypes.
1084 * This macro is used to declare function parameters for folks who want
1085 * to make declarations with prototypes using a different style than
1086 * the above macros. Use double parentheses. For example:
1088 * int main _((int argc, char *argv[]));
1090 #define CAN_PROTOTYPE /**/
1091 #ifdef CAN_PROTOTYPE
1092 #define _(args) args
1098 * This symbol contains the full pathname to the shell used on this
1099 * on this system to execute Bourne shell scripts. Usually, this will be
1100 * /bin/sh, though it's possible that some systems will have /bin/ksh,
1101 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
1104 #define SH_PATH "cmd /x /c" /**/
1107 * This symbol is defined to be the type of char used in stdio.h.
1108 * It has the values "unsigned char" or "char".
1110 #define STDCHAR unsigned char /**/
1113 * This symbol indicates how much support of the void type is given by this
1114 * compiler. What various bits mean:
1116 * 1 = supports declaration of void
1117 * 2 = supports arrays of pointers to functions returning void
1118 * 4 = supports comparisons between pointers to void functions and
1119 * addresses of void functions
1120 * 8 = suports declaration of generic void pointers
1122 * The package designer should define VOIDUSED to indicate the requirements
1123 * of the package. This can be done either by #defining VOIDUSED before
1124 * including config.h, or by defining defvoidused in Myinit.U. If the
1125 * latter approach is taken, only those flags will be tested. If the
1126 * level of void support necessary is not present, defines void to int.
1131 #define VOIDFLAGS 15
1132 #if (VOIDFLAGS & VOIDUSED) != VOIDUSED
1133 #define void int /* is void to be avoided? */
1134 #define M_VOID /* Xenix strikes again */
1138 * This symbol contains the number of bytes required to align a
1139 * double. Usual values are 2, 4 and 8.
1140 * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture
1141 * Binaries (MAB) for targets with varying alignment. This only matters
1142 * for perl, where the config.h can be generated and installed on one
1143 * system, and used by a different architecture to build an extension.
1144 * The default is eight, for safety.
1146 #define MEM_ALIGNBYTES 8 /**/
1149 * This symbol holds the hexadecimal constant defined in byteorder,
1150 * i.e. 0x1234 or 0x4321, etc...
1151 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
1152 * Binaries (MAB) on either big endian or little endian machines.
1153 * The endian-ness is available at compile-time. This only matters
1154 * for perl, where the config.h can be generated and installed on
1155 * one system, and used by a different architecture to build an
1156 * extension. Older versions of NeXT that might not have
1157 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1158 * so the default case (for NeXT) is big endian to catch them.
1159 * This might matter for NeXT 3.0.
1162 #define BYTEORDER 0x1234 /* large digits for MSB */
1164 #ifdef __LITTLE_ENDIAN__
1165 #define BYTEORDER 0x1234
1166 #else /* __BIG_ENDIAN__ */
1167 #define BYTEORDER 0x4321
1168 #endif /* ENDIAN CHECK */
1172 * This symbol is defined if the C compiler can cast negative
1173 * or large floating point numbers to 32-bit ints.
1175 #define CASTI32 /**/
1178 * This symbol is defined if the C compiler can cast negative
1179 * numbers to unsigned longs, ints and shorts.
1182 * This symbol contains flags that say what difficulties the compiler
1183 * has casting odd floating values to unsigned long:
1185 * 1 = couldn't cast < 0
1186 * 2 = couldn't cast >= 0x80000000
1187 * 4 = couldn't cast in argument expression list
1189 #define CASTNEGFLOAT /**/
1190 #define CASTFLAGS 0 /**/
1193 * This symbol, if defined, indicates that the closedir() routine
1194 * does not return a value.
1196 /*#define VOID_CLOSEDIR /**/
1199 * This preprocessor macro is defined to convert a floating point
1200 * number to a string without a trailing decimal point. This
1201 * emulates the behavior of sprintf("%g"), but is sometimes much more
1202 * efficient. If gconvert() is not available, but gcvt() drops the
1203 * trailing decimal point, then gcvt() is used. If all else fails,
1204 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1205 * macro are: value, number of digits, whether trailing zeros should
1206 * be retained, and the output buffer.
1207 * Possible values are:
1208 * d_Gconvert='gconvert((x),(n),(t),(b))'
1209 * d_Gconvert='gcvt((x),(n),(b))'
1210 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1211 * The last two assume trailing zeros should not be kept.
1213 #define Gconvert(x,n,t,b) gcvt((x),(n),(b))
1216 * This symbol, if defined, indicates to the C program that
1217 * the GNU C library is being used.
1219 /*#define HAS_GNULIBC /**/
1221 * This manifest constant lets the C program know that isascii
1224 #define HAS_ISASCII /**/
1227 * This symbol, if defined, indicates that the lchown routine is
1228 * available to operate on a symbolic link (instead of following the
1231 /*#define HAS_LCHOWN /**/
1234 * This manifest constant lets the C program know that the three
1235 * argument form of open(2) is available.
1237 /*#define HAS_OPEN3 /**/
1240 * This symbol, if defined, indicates that the bcopy routine is available
1241 * to copy potentially overlapping memory blocks. Otherwise you should
1242 * probably use memmove() or memcpy(). If neither is defined, roll your
1245 /*#define HAS_SAFE_BCOPY /**/
1248 * This symbol, if defined, indicates that the memcpy routine is available
1249 * to copy potentially overlapping memory blocks. Otherwise you should
1250 * probably use memmove() or memcpy(). If neither is defined, roll your
1253 /*#define HAS_SAFE_MEMCPY /**/
1256 * This symbol, if defined, indicates that the memcmp routine is available
1257 * and can be used to compare relative magnitudes of chars with their high
1258 * bits set. If it is not defined, roll your own version.
1260 #define HAS_SANE_MEMCMP /**/
1263 * This symbol, if defined, indicates that Vr4's sigaction() routine
1266 /*#define HAS_SIGACTION /**/
1269 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
1272 * This macro is used in the same way as sigsetjmp(), but will invoke
1273 * traditional setjmp() if sigsetjmp isn't available.
1274 * See HAS_SIGSETJMP.
1277 * This macro is used in the same way as siglongjmp(), but will invoke
1278 * traditional longjmp() if siglongjmp isn't available.
1279 * See HAS_SIGSETJMP.
1281 /*#define HAS_SIGSETJMP /**/
1282 #ifdef HAS_SIGSETJMP
1283 #define Sigjmp_buf sigjmp_buf
1284 #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
1285 #define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
1287 #define Sigjmp_buf jmp_buf
1288 #define Sigsetjmp(buf,save_mask) setjmp((buf))
1289 #define Siglongjmp(buf,retval) longjmp((buf),(retval))
1293 * This symbol is defined if the _ptr and _cnt fields (or similar)
1294 * of the stdio FILE structure can be used to access the stdio buffer
1295 * for a file handle. If this is defined, then the FILE_ptr(fp)
1296 * and FILE_cnt(fp) macros will also be defined and should be used
1297 * to access these fields.
1300 * This macro is used to access the _ptr field (or equivalent) of the
1301 * FILE structure pointed to by its argument. This macro will always be
1302 * defined if USE_STDIO_PTR is defined.
1304 /* STDIO_PTR_LVALUE:
1305 * This symbol is defined if the FILE_ptr macro can be used as an
1309 * This macro is used to access the _cnt field (or equivalent) of the
1310 * FILE structure pointed to by its argument. This macro will always be
1311 * defined if USE_STDIO_PTR is defined.
1313 /* STDIO_CNT_LVALUE:
1314 * This symbol is defined if the FILE_cnt macro can be used as an
1317 #define USE_STDIO_PTR /**/
1318 #ifdef USE_STDIO_PTR
1319 #define FILE_ptr(fp) ((fp)->curp)
1320 #define STDIO_PTR_LVALUE /**/
1321 #define FILE_cnt(fp) ((fp)->level)
1322 #define STDIO_CNT_LVALUE /**/
1326 * This symbol is defined if the _base field (or similar) of the
1327 * stdio FILE structure can be used to access the stdio buffer for
1328 * a file handle. If this is defined, then the FILE_base(fp) macro
1329 * will also be defined and should be used to access this field.
1330 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
1331 * to determine the number of bytes in the buffer. USE_STDIO_BASE
1332 * will never be defined unless USE_STDIO_PTR is.
1335 * This macro is used to access the _base field (or equivalent) of the
1336 * FILE structure pointed to by its argument. This macro will always be
1337 * defined if USE_STDIO_BASE is defined.
1340 * This macro is used to determine the number of bytes in the I/O
1341 * buffer pointed to by _base field (or equivalent) of the FILE
1342 * structure pointed to its argument. This macro will always be defined
1343 * if USE_STDIO_BASE is defined.
1345 #define USE_STDIO_BASE /**/
1346 #ifdef USE_STDIO_BASE
1347 #define FILE_base(fp) ((fp)->buffer)
1348 #define FILE_bufsiz(fp) ((fp)->level + (fp)->curp - (fp)->buffer)
1352 * This symbol, if defined, indicates that the vprintf routine is available
1353 * to printf with a pointer to an argument list. If unavailable, you
1354 * may need to write your own, probably in terms of _doprnt().
1356 /* USE_CHAR_VSPRINTF:
1357 * This symbol is defined if this system has vsprintf() returning type
1358 * (char*). The trend seems to be to declare it as "int vsprintf()". It
1359 * is up to the package author to declare vsprintf correctly based on the
1362 #define HAS_VPRINTF /**/
1363 /*#define USE_CHAR_VSPRINTF /**/
1366 * This symbol contains the size of a double, so that the C preprocessor
1367 * can make decisions based on it.
1369 #define DOUBLESIZE 8 /**/
1372 * This symbol, if defined, indicates to the C program that it should
1376 * This symbol, if defined, indicates to the C program that it should
1377 * include <sys/time.h>.
1379 /* I_SYS_TIME_KERNEL:
1380 * This symbol, if defined, indicates to the C program that it should
1381 * include <sys/time.h> with KERNEL defined.
1384 /*#define I_SYS_TIME /**/
1385 /*#define I_SYS_TIME_KERNEL /**/
1388 * This symbol contains the value of sizeof(int) so that the C
1389 * preprocessor can make decisions based on it.
1392 * This symbol contains the value of sizeof(long) so that the C
1393 * preprocessor can make decisions based on it.
1396 * This symbol contains the value of sizeof(short) so that the C
1397 * preprocessor can make decisions based on it.
1399 #define INTSIZE 4 /**/
1400 #define LONGSIZE 4 /**/
1401 #define SHORTSIZE 2 /**/
1404 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
1405 * non-blocking I/O for the file descriptor. Note that there is no way
1406 * back, i.e. you cannot turn it blocking again this way. If you wish to
1407 * alternatively switch between blocking and non-blocking, use the
1408 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
1411 * This symbol holds the errno error code set by read() when no data was
1412 * present on the non-blocking file descriptor.
1415 * This symbol holds the return code from read() when no data is present
1416 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
1417 * not defined, then you can't distinguish between no data and EOF by
1418 * issuing a read(). You'll have to find another way to tell for sure!
1421 * This symbol, if defined, indicates to the C program that a read() on
1422 * a non-blocking file descriptor will return 0 on EOF, and not the value
1423 * held in RD_NODATA (-1 usually, in that case!).
1425 #define VAL_O_NONBLOCK O_NONBLOCK
1426 #define VAL_EAGAIN EAGAIN
1427 #define RD_NODATA -1
1428 #define EOF_NONBLOCK
1431 * This symbol contains the size of a pointer, so that the C preprocessor
1432 * can make decisions based on it. It will be sizeof(void *) if
1433 * the compiler supports (void *); otherwise it will be
1436 #define PTRSIZE 4 /**/
1439 * This symbol contains the number of bits of random number the rand()
1440 * function produces. Usual values are 15, 16, and 31.
1442 #define RANDBITS 15 /**/
1445 * This symbol holds the type used by functions that return
1446 * a count of bytes or an error condition. It must be a signed type.
1447 * It is usually ssize_t, but may be long or int, etc.
1448 * It may be necessary to include <sys/types.h> or <unistd.h>
1449 * to get any typedef'ed information.
1450 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
1452 #define SSize_t int /* signed count of bytes */
1455 * This symbol contains the name of the operating system, as determined
1456 * by Configure. You shouldn't rely on it too much; the specific
1457 * feature tests from Configure are generally more reliable.
1459 #define OSNAME "MSWin32" /**/
1462 * This variable, if defined, holds the name of the directory in
1463 * which the user wants to put architecture-dependent public
1464 * library files for perl5. It is most often a local directory
1465 * such as /usr/local/lib. Programs using this variable must be
1466 * prepared to deal with filename expansion. If ARCHLIB is the
1467 * same as PRIVLIB, it is not defined, since presumably the
1468 * program already searches PRIVLIB.
1471 * This symbol contains the ~name expanded version of ARCHLIB, to be used
1472 * in programs that are not prepared to deal with ~ expansion at run-time.
1474 #define ARCHLIB "c:\\perl\\5.00470\\lib\\MSWin32-x86" /**/
1475 /*#define ARCHLIB_EXP "" /**/
1478 * This macro catenates 2 tokens together.
1481 * This macro surrounds its token with double quotes.
1484 #define CAT2(a,b)a/**/b
1485 #define STRINGIFY(a)"a"
1486 /* If you can get stringification with catify, tell me how! */
1489 #define CAT2(a,b)a ## b
1490 #define StGiFy(a)# a
1491 #define STRINGIFY(a)StGiFy(a)
1493 #if 42 != 1 && 42 != 42
1494 #include "Bletch: How does this C preprocessor catenate tokens?"
1498 * This symbol, if defined, contains the full pathname of csh.
1500 /*#define HAS_CSH /**/
1506 * This symbol, if defined, indicates that the endhostent() routine is
1507 * available to close whatever was being used for host queries.
1509 /*#define HAS_ENDHOSTENT /**/
1512 * This symbol, if defined, indicates that the endnetent() routine is
1513 * available to close whatever was being used for network queries.
1515 /*#define HAS_ENDNETENT /**/
1518 * This symbol, if defined, indicates that the endprotoent() routine is
1519 * available to close whatever was being used for protocol queries.
1521 /*#define HAS_ENDPROTOENT /**/
1524 * This symbol, if defined, indicates that the endservent() routine is
1525 * available to close whatever was being used for service queries.
1527 /*#define HAS_ENDSERVENT /**/
1529 /* HAS_GETHOSTBYADDR:
1530 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1531 * available to look up hosts by their IP addresses.
1533 #define HAS_GETHOSTBYADDR /**/
1535 /* HAS_GETHOSTBYNAME:
1536 * This symbol, if defined, indicates that the gethostbyname() routine is
1537 * available to look up host names in some data base or other.
1539 #define HAS_GETHOSTBYNAME /**/
1542 * This symbol, if defined, indicates that the gethostent() routine is
1543 * available to look up host names in some data base or another.
1545 /*#define HAS_GETHOSTENT /**/
1547 /* HAS_GETNETBYADDR:
1548 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1549 * available to look up networks by their IP addresses.
1551 /*#define HAS_GETNETBYADDR /**/
1553 /* HAS_GETNETBYNAME:
1554 * This symbol, if defined, indicates that the getnetbyname() routine is
1555 * available to look up networks by their names.
1557 /*#define HAS_GETNETBYNAME /**/
1560 * This symbol, if defined, indicates that the getnetent() routine is
1561 * available to look up network names in some data base or another.
1563 /*#define HAS_GETNETENT /**/
1566 * This symbol, if defined, indicates that the getprotoent() routine is
1567 * available to look up protocols in some data base or another.
1569 /*#define HAS_GETPROTOENT /**/
1571 /* HAS_GETPROTOBYNAME:
1572 * This symbol, if defined, indicates that the getprotobyname()
1573 * routine is available to look up protocols by their name.
1575 /* HAS_GETPROTOBYNUMBER:
1576 * This symbol, if defined, indicates that the getprotobynumber()
1577 * routine is available to look up protocols by their number.
1579 #define HAS_GETPROTOBYNAME /**/
1580 #define HAS_GETPROTOBYNUMBER /**/
1583 * This symbol, if defined, indicates that the getservent() routine is
1584 * available to look up network services in some data base or another.
1586 /*#define HAS_GETSERVENT /**/
1588 /* HAS_GETSERVBYNAME:
1589 * This symbol, if defined, indicates that the getservbyname()
1590 * routine is available to look up services by their name.
1592 /* HAS_GETSERVBYPORT:
1593 * This symbol, if defined, indicates that the getservbyport()
1594 * routine is available to look up services by their port.
1596 #define HAS_GETSERVBYNAME /**/
1597 #define HAS_GETSERVBYPORT /**/
1600 * This symbol will be defined if the C compiler supports long
1604 * This symbol contains the size of a long double, so that the
1605 * C preprocessor can make decisions based on it. It is only
1606 * defined if the system supports long doubles.
1608 #define HAS_LONG_DOUBLE /**/
1609 #ifdef HAS_LONG_DOUBLE
1610 #define LONG_DOUBLESIZE 10 /**/
1614 * This symbol will be defined if the C compiler supports
1618 * This symbol contains the size of a long long, so that the
1619 * C preprocessor can make decisions based on it. It is only
1620 * defined if the system supports long long.
1622 /*#define HAS_LONG_LONG /**/
1623 #ifdef HAS_LONG_LONG
1624 #define LONGLONGSIZE 8 /**/
1628 * This symbol, if defined, indicates that the setgroups() routine is
1629 * available to set the list of process groups. If unavailable, multiple
1630 * groups are probably not supported.
1632 /*#define HAS_SETGROUPS /**/
1635 * This symbol, if defined, indicates that the sethostent() routine is
1638 /*#define HAS_SETHOSTENT /**/
1641 * This symbol, if defined, indicates that the setnetent() routine is
1644 /*#define HAS_SETNETENT /**/
1647 * This symbol, if defined, indicates that the setprotoent() routine is
1650 /*#define HAS_SETPROTOENT /**/
1653 * This symbol, if defined, indicates that the setservent() routine is
1656 /*#define HAS_SETSERVENT /**/
1659 * This symbol, if defined, indicates that the setvbuf routine is
1660 * available to change buffering on an open stdio stream.
1661 * to a line-buffered mode.
1663 #define HAS_SETVBUF /**/
1666 * This symbol, if defined, indicates that the BSD socket interface is
1670 * This symbol, if defined, indicates that the BSD socketpair() call is
1673 #define HAS_SOCKET /**/
1674 /*#define HAS_SOCKETPAIR /**/
1677 * This symbol, if defined, indicates that the union semun is
1678 * defined by including <sys/sem.h>. If not, the user code
1679 * probably needs to define it as:
1682 * struct semid_ds *buf;
1683 * unsigned short *array;
1686 /* USE_SEMCTL_SEMUN:
1687 * This symbol, if defined, indicates that union semun is
1688 * used for semctl IPC_STAT.
1690 /* USE_SEMCTL_SEMID_DS:
1691 * This symbol, if defined, indicates that struct semid_ds * is
1692 * used for semctl IPC_STAT.
1694 #define HAS_UNION_SEMUN /**/
1695 /*#define USE_SEMCTL_SEMUN /**/
1696 /*#define USE_SEMCTL_SEMID_DS /**/
1699 * This symbol's value is either "void" or "int", corresponding to the
1700 * appropriate return type of a signal handler. Thus, you can declare
1701 * a signal handler using "Signal_t (*handler)()", and define the
1702 * handler using "Signal_t handler(sig)".
1704 #define Signal_t void /* Signal handler's return type */
1707 * This symbol holds the type used for the second argument to
1708 * getgroups() and setgropus(). Usually, this is the same as
1709 * gidtype (gid_t) , but sometimes it isn't.
1710 * It can be int, ushort, uid_t, etc...
1711 * It may be necessary to include <sys/types.h> to get any
1712 * typedef'ed information. This is only required if you have
1713 * getgroups() or setgropus()..
1715 #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
1716 #define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
1720 * This symbol, if defined, indicates that <netdb.h> exists and
1721 * should be included.
1723 /*#define I_NETDB /**/
1726 * This symbol, if defined, indicates to the C program that it should
1730 * This symbol, if defined, indicates to the C program that struct passwd
1731 * contains pw_quota.
1734 * This symbol, if defined, indicates to the C program that struct passwd
1738 * This symbol, if defined, indicates to the C program that struct passwd
1739 * contains pw_change.
1742 * This symbol, if defined, indicates to the C program that struct passwd
1743 * contains pw_class.
1746 * This symbol, if defined, indicates to the C program that struct passwd
1747 * contains pw_expire.
1750 * This symbol, if defined, indicates to the C program that struct passwd
1751 * contains pw_comment.
1754 * This symbol, if defined, indicates to the C program that struct passwd
1755 * contains pw_gecos.
1757 /*#define I_PWD /**/
1758 /*#define PWQUOTA /**/
1759 /*#define PWAGE /**/
1760 /*#define PWCHANGE /**/
1761 /*#define PWCLASS /**/
1762 /*#define PWEXPIRE /**/
1763 /*#define PWCOMMENT /**/
1764 /*#define PWGECOS /**/
1767 * This symbol contains the name of the private library for this package.
1768 * The library is private in the sense that it needn't be in anyone's
1769 * execution path, but it should be accessible by the world. The program
1770 * should be prepared to do ~ expansion.
1773 * This symbol contains the ~name expanded version of PRIVLIB, to be used
1774 * in programs that are not prepared to deal with ~ expansion at run-time.
1776 #define PRIVLIB "c:\\perl\\5.00470\\lib" /**/
1777 #define PRIVLIB_EXP (win32_get_privlib("5.00470")) /**/
1780 * This symbol contains a list of signal names in order of
1781 * signal number. This is intended
1782 * to be used as a static array initialization, like this:
1783 * char *sig_name[] = { SIG_NAME };
1784 * The signals in the list are separated with commas, and each signal
1785 * is surrounded by double quotes. There is no leading SIG in the signal
1786 * name, i.e. SIGQUIT is known as "QUIT".
1787 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
1788 * etc., where nn is the actual signal number (e.g. NUM37).
1789 * The signal number for sig_name[i] is stored in sig_num[i].
1790 * The last element is 0 to terminate the list with a NULL. This
1791 * corresponds to the 0 at the end of the sig_num list.
1794 * This symbol contains a list of signal numbers, in the same order as the
1795 * SIG_NAME list. It is suitable for static array initialization, as in:
1796 * int sig_num[] = { SIG_NUM };
1797 * The signals in the list are separated with commas, and the indices
1798 * within that list and the SIG_NAME list match, so it's easy to compute
1799 * the signal name from a number or vice versa at the price of a small
1800 * dynamic linear lookup.
1801 * Duplicates are allowed, but are moved to the end of the list.
1802 * The signal number corresponding to sig_name[i] is sig_number[i].
1803 * if (i < NSIG) then sig_number[i] == i.
1804 * The last element is 0, corresponding to the 0 at the end of
1805 * the sig_name list.
1807 #define SIG_NAME "ZERO", "INT", "QUIT", "ILL", "FPE", "KILL", "SEGV", "PIPE", "ALRM", "TERM", "USR1", "USR2", "CHLD", "USR3", "BREAK", "ABRT", "STOP", "CONT", "CLD", 0 /**/
1808 #define SIG_NUM 0, 2, 3, 4, 8, 9, 11, 13, 14, 15, 16, 17, 18, 20, 21, 22, 23, 25, 18, 0 /**/
1811 * This symbol contains the name of the private library for this package.
1812 * The library is private in the sense that it needn't be in anyone's
1813 * execution path, but it should be accessible by the world. The program
1814 * should be prepared to do ~ expansion.
1815 * The standard distribution will put nothing in this directory.
1816 * Individual sites may place their own extensions and modules in
1820 * This symbol contains the ~name expanded version of SITEARCH, to be used
1821 * in programs that are not prepared to deal with ~ expansion at run-time.
1823 #define SITEARCH "c:\\perl\\site\\5.00470\\lib\\MSWin32-x86" /**/
1824 /*#define SITEARCH_EXP "" /**/
1827 * This symbol contains the name of the private library for this package.
1828 * The library is private in the sense that it needn't be in anyone's
1829 * execution path, but it should be accessible by the world. The program
1830 * should be prepared to do ~ expansion.
1831 * The standard distribution will put nothing in this directory.
1832 * Individual sites may place their own extensions and modules in
1836 * This symbol contains the ~name expanded version of SITELIB, to be used
1837 * in programs that are not prepared to deal with ~ expansion at run-time.
1839 #define SITELIB "c:\\perl\\site\\5.00470\\lib" /**/
1840 #define SITELIB_EXP (win32_get_sitelib("5.00470")) /**/
1842 /* DLSYM_NEEDS_UNDERSCORE:
1843 * This symbol, if defined, indicates that we need to prepend an
1844 * underscore to the symbol name before calling dlsym(). This only
1845 * makes sense if you *have* dlsym, which we will presume is the
1846 * case if you're using dl_dlopen.xs.
1848 /*#define DLSYM_NEEDS_UNDERSCORE /**/
1851 * This symbol, if defined, indicates that sfio should
1854 /*#define USE_SFIO /**/
1856 /* USE_DYNAMIC_LOADING:
1857 * This symbol, if defined, indicates that dynamic loading of
1858 * some sort is available.
1860 #define USE_DYNAMIC_LOADING /**/
1863 * This symbol contains the type of the prefix structure element
1864 * in the <db.h> header file. In older versions of DB, it was
1865 * int, while in newer ones it is u_int32_t.
1868 * This symbol contains the type of the prefix structure element
1869 * in the <db.h> header file. In older versions of DB, it was
1870 * int, while in newer ones it is size_t.
1872 #define DB_Hash_t int /**/
1873 #define DB_Prefix_t int /**/
1876 * This variable contains the string to put in front of a perl
1877 * script to make sure (one hopes) that it runs with perl and not
1880 #define STARTPERL "#!perl" /**/
1883 * This symbol, if defined, indicates that the PerlIO abstraction should
1884 * be used throughout. If not defined, stdio should be
1885 * used in a fully backward compatible manner.
1887 /*#define USE_PERLIO /**/
1889 /* HAS_GETHOST_PROTOS:
1890 * This symbol, if defined, indicates that <netdb.h> includes
1891 * prototypes for gethostent(), gethostbyname(), and
1892 * gethostbyaddr(). Otherwise, it is up to the program to guess
1893 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1895 #define HAS_GETHOST_PROTOS /**/
1897 /* HAS_GETNET_PROTOS:
1898 * This symbol, if defined, indicates that <netdb.h> includes
1899 * prototypes for getnetent(), getnetbyname(), and
1900 * getnetbyaddr(). Otherwise, it is up to the program to guess
1901 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1903 /*#define HAS_GETNET_PROTOS /**/
1905 /* HAS_GETPROTO_PROTOS:
1906 * This symbol, if defined, indicates that <netdb.h> includes
1907 * prototypes for getprotoent(), getprotobyname(), and
1908 * getprotobyaddr(). Otherwise, it is up to the program to guess
1909 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1911 #define HAS_GETPROTO_PROTOS /**/
1913 /* HAS_GETSERV_PROTOS:
1914 * This symbol, if defined, indicates that <netdb.h> includes
1915 * prototypes for getservent(), getservbyname(), and
1916 * getservbyaddr(). Otherwise, it is up to the program to guess
1917 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1919 #define HAS_GETSERV_PROTOS /**/
1922 * This symbol holds the type used for the 1st argument
1923 * to gethostbyaddr().
1926 * This symbol holds the type used for the 2nd argument
1927 * to gethostbyaddr().
1930 * This symbol holds the type used for the argument to
1934 * This symbol holds the type used for the 1st argument to
1937 #define Netdb_host_t char * /**/
1938 #define Netdb_hlen_t int /**/
1939 #define Netdb_name_t char * /**/
1940 #define Netdb_net_t long /**/
1943 * This symbol holds the type used for the 2nd, 3rd, and 4th
1944 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
1945 * is defined, and 'int *' otherwise. This is only useful if you
1946 * have select(), of course.
1948 #define Select_fd_set_t Perl_fd_set * /**/
1951 * This symbol holds a string representing the architecture name.
1952 * It may be used to construct an architecture-dependant pathname
1953 * where library files may be held under a private library, for
1956 #define ARCHNAME "MSWin32-x86" /**/
1958 /* HAS_PTHREAD_YIELD:
1959 * This symbol, if defined, indicates that the pthread_yield
1960 * routine is available to yield the execution of the current
1964 * This symbol, if defined, indicates that the sched_yield
1965 * routine is available to yield the execution of the current
1968 /*#define HAS_PTHREAD_YIELD /**/
1969 /*#define HAS_SCHED_YIELD /**/
1971 /* PTHREADS_CREATED_JOINABLE:
1972 * This symbol, if defined, indicates that pthreads are created
1973 * in the joinable (aka undetached) state.
1975 /*#define PTHREADS_CREATED_JOINABLE /**/
1978 * This symbol, if defined, indicates that Perl should
1979 * be built to use threads.
1981 /* OLD_PTHREADS_API:
1982 * This symbol, if defined, indicates that Perl should
1983 * be built to use the old draft POSIX threads API.
1985 /*#define USE_THREADS /**/
1986 /*#define OLD_PTHREADS_API /**/
1989 * This symbol holds the type returned by time(). It can be long,
1990 * or time_t on BSD sites (in which case <sys/types.h> should be
1993 #define Time_t time_t /* Time type */
1996 * This symbol, if defined, indicates that the times() routine exists.
1997 * Note that this became obsolete on some systems (SUNOS), which now
1998 * use getrusage(). It may be necessary to include <sys/times.h>.
2000 #define HAS_TIMES /**/
2003 * This symbol holds the type used to declare file positions in libc.
2004 * It can be fpos_t, long, uint, etc... It may be necessary to include
2005 * <sys/types.h> to get any typedef'ed information.
2007 #define Fpos_t fpos_t /* File position type */
2010 * This symbol holds the return type of getgid() and the type of
2011 * argument to setrgid() and related functions. Typically,
2012 * it is the type of group ids in the kernel. It can be int, ushort,
2013 * uid_t, etc... It may be necessary to include <sys/types.h> to get
2014 * any typedef'ed information.
2016 #define Gid_t gid_t /* Type for getgid(), etc... */
2019 * This symbol holds the type used to declare device numbers.
2020 * It can be int, long, dev_t, etc... It may be necessary to include
2021 * <sys/types.h> to get any typedef'ed information.
2023 #define Dev_t dev_t /* <device> type */
2026 * This symbol holds the type used to declare offsets in the kernel.
2027 * It can be int, long, off_t, etc... It may be necessary to include
2028 * <sys/types.h> to get any typedef'ed information.
2030 #define Off_t off_t /* <offset> type */
2033 * This symbol holds the type used to declare file modes
2034 * for systems calls. It is usually mode_t, but may be
2035 * int or unsigned short. It may be necessary to include <sys/types.h>
2036 * to get any typedef'ed information.
2038 #define Mode_t mode_t /* file mode parameter for system calls */
2041 * This symbol holds the type used to declare process ids in the kernel.
2042 * It can be int, uint, pid_t, etc... It may be necessary to include
2043 * <sys/types.h> to get any typedef'ed information.
2045 #define Pid_t int /* PID type */
2048 * This symbol holds the type used to declare length parameters
2049 * for string functions. It is usually size_t, but may be
2050 * unsigned long, int, etc. It may be necessary to include
2051 * <sys/types.h> to get any typedef'ed information.
2053 #define Size_t size_t /* length paramater for string functions */
2056 * This symbol holds the type used to declare user ids in the kernel.
2057 * It can be int, ushort, uid_t, etc... It may be necessary to include
2058 * <sys/types.h> to get any typedef'ed information.
2060 #define Uid_t uid_t /* UID type */