2 * This file was produced by running the config_h.SH script, which
3 * gets its values from undef, which is generally produced by
6 * Feel free to modify any of this as the need arises. Note, however,
7 * that running config_h.SH again will wipe out any changes you've made.
8 * For a more permanent change edit undef and rerun config_h.SH.
10 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
14 * Package name : perl5
16 * Configuration time: Sun May 12 17:16:39 2002
17 * Configured by : gsar
25 * This symbol holds the complete pathname to the sed program.
27 #define LOC_SED "" /**/
30 * This symbol, if defined, indicates that the alarm routine is
33 #define HAS_ALARM /**/
36 * This symbol indicates the C compiler can check for function attributes,
37 * such as printf formats. This is normally only supported by GNU cc.
39 /*#define HASATTRIBUTE /**/
44 #define __attribute__(_arg_)
48 * This symbol is defined if the bcmp() routine is available to
49 * compare blocks of memory.
51 /*#define HAS_BCMP /**/
54 * This symbol is defined if the bcopy() routine is available to
55 * copy blocks of memory.
57 /*#define HAS_BCOPY /**/
60 * This symbol is defined if the bzero() routine is available to
61 * set a memory block to 0.
63 /*#define HAS_BZERO /**/
66 * This symbol, if defined, indicates that the chown routine is
69 /*#define HAS_CHOWN /**/
72 * This symbol, if defined, indicates that the chroot routine is
75 /*#define HAS_CHROOT /**/
78 * This symbol, if defined, indicates that the chsize routine is available
79 * to truncate files. You might need a -lx to get this routine.
81 #define HAS_CHSIZE /**/
84 * This symbol, if defined, indicates that this C compiler knows about
85 * the const type. There is no need to actually test for that symbol
86 * within your programs. The mere use of the "const" keyword will
87 * trigger the necessary tests.
95 * This symbol, if defined, indicates that the cuserid routine is
96 * available to get character login names.
98 /*#define HAS_CUSERID /**/
101 * This symbol, if defined, indicates that this system's <float.h>
102 * or <limits.h> defines the symbol DBL_DIG, which is the number
103 * of significant digits in a double precision number. If this
104 * symbol is not defined, a guess of 15 is usually pretty good.
106 #define HAS_DBL_DIG /**/
109 * This symbol, if defined, indicates that the difftime routine is
112 #define HAS_DIFFTIME /**/
115 * This symbol, if defined, indicates that the dlerror routine is
116 * available to return a string describing the last error that
117 * occurred from a call to dlopen(), dlclose() or dlsym().
119 #define HAS_DLERROR /**/
122 * This symbol, if defined, indicates that the dup2 routine is
123 * available to duplicate file descriptors.
125 #define HAS_DUP2 /**/
128 * This symbol, if defined, indicates that the fchmod routine is available
129 * to change mode of opened files. If unavailable, use chmod().
131 /*#define HAS_FCHMOD /**/
134 * This symbol, if defined, indicates that the fchown routine is available
135 * to change ownership of opened files. If unavailable, use chown().
137 /*#define HAS_FCHOWN /**/
140 * This symbol, if defined, indicates to the C program that
141 * the fcntl() function exists.
143 /*#define HAS_FCNTL /**/
146 * This symbol, if defined, indicates that the fgetpos routine is
147 * available to get the file position indicator, similar to ftell().
149 #define HAS_FGETPOS /**/
152 * This symbol, if defined, indicates that the flock routine is
153 * available to do file locking.
155 #define HAS_FLOCK /**/
158 * This symbol, if defined, indicates that the fork routine is
161 /*#define HAS_FORK /**/
164 * This symbol, if defined, indicates that the fsetpos routine is
165 * available to set the file position indicator, similar to fseek().
167 #define HAS_FSETPOS /**/
170 * This symbol, if defined, indicates that the gettimeofday() system
171 * call is available for a sub-second accuracy clock. Usually, the file
172 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
173 * The type "Timeval" should be used to refer to "struct timeval".
175 #define HAS_GETTIMEOFDAY /**/
176 #ifdef HAS_GETTIMEOFDAY
177 #define Timeval struct timeval /* Structure used by gettimeofday() */
181 * This symbol, if defined, indicates that the getgroups() routine is
182 * available to get the list of process groups. If unavailable, multiple
183 * groups are probably not supported.
185 /*#define HAS_GETGROUPS /**/
188 * This symbol, if defined, indicates that the getlogin routine is
189 * available to get the login name.
191 #define HAS_GETLOGIN /**/
194 * This symbol, if defined, indicates to the C program that
195 * the getpgid(pid) function is available to get the
198 /*#define HAS_GETPGID /**/
201 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
202 * routine is available to get the current process group.
204 /*#define HAS_GETPGRP2 /**/
207 * This symbol, if defined, indicates that the getppid routine is
208 * available to get the parent process ID.
210 /*#define HAS_GETPPID /**/
213 * This symbol, if defined, indicates that the getpriority routine is
214 * available to get a process's priority.
216 /*#define HAS_GETPRIORITY /**/
219 * This symbol, if defined, indicates to the C program that the
220 * inet_aton() function is available to parse IP address "dotted-quad"
223 /*#define HAS_INET_ATON /**/
226 * This symbol, if defined, indicates that the killpg routine is available
227 * to kill process groups. If unavailable, you probably should use kill
228 * with a negative process number.
230 /*#define HAS_KILLPG /**/
233 * This symbol, if defined, indicates that the link routine is
234 * available to create hard links.
236 #define HAS_LINK /**/
239 * This symbol, if defined, indicates that the localeconv routine is
240 * available for numeric and monetary formatting conventions.
242 #define HAS_LOCALECONV /**/
245 * This symbol, if defined, indicates that the lockf routine is
246 * available to do file locking.
248 /*#define HAS_LOCKF /**/
251 * This symbol, if defined, indicates that the lstat routine is
252 * available to do file stats on symbolic links.
254 /*#define HAS_LSTAT /**/
257 * This symbol, if defined, indicates that the mblen routine is available
258 * to find the number of bytes in a multibye character.
260 #define HAS_MBLEN /**/
263 * This symbol, if defined, indicates that the mbstowcs routine is
264 * available to covert a multibyte string into a wide character string.
266 #define HAS_MBSTOWCS /**/
269 * This symbol, if defined, indicates that the mbtowc routine is available
270 * to covert a multibyte to a wide character.
272 #define HAS_MBTOWC /**/
275 * This symbol, if defined, indicates that the memcmp routine is available
276 * to compare blocks of memory.
278 #define HAS_MEMCMP /**/
281 * This symbol, if defined, indicates that the memcpy routine is available
282 * to copy blocks of memory.
284 #define HAS_MEMCPY /**/
287 * This symbol, if defined, indicates that the memmove routine is available
288 * to copy potentially overlapping blocks of memory. This should be used
289 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
292 #define HAS_MEMMOVE /**/
295 * This symbol, if defined, indicates that the memset routine is available
296 * to set blocks of memory.
298 #define HAS_MEMSET /**/
301 * This symbol, if defined, indicates that the mkdir routine is available
302 * to create directories. Otherwise you should fork off a new process to
305 #define HAS_MKDIR /**/
308 * This symbol, if defined, indicates that the mkfifo routine is
309 * available to create FIFOs. Otherwise, mknod should be able to
310 * do it for you. However, if mkfifo is there, mknod might require
311 * super-user privileges which mkfifo will not.
313 /*#define HAS_MKFIFO /**/
316 * This symbol, if defined, indicates that the mktime routine is
319 #define HAS_MKTIME /**/
322 * This symbol, if defined, indicates that the msync system call is
323 * available to synchronize a mapped file.
325 /*#define HAS_MSYNC /**/
328 * This symbol, if defined, indicates that the munmap system call is
329 * available to unmap a region, usually mapped by mmap().
331 /*#define HAS_MUNMAP /**/
334 * This symbol, if defined, indicates that the nice routine is
337 /*#define HAS_NICE /**/
340 * This symbol, if defined, indicates that pathconf() is available
341 * to determine file-system related limits and options associated
342 * with a given filename.
345 * This symbol, if defined, indicates that pathconf() is available
346 * to determine file-system related limits and options associated
347 * with a given open file descriptor.
349 /*#define HAS_PATHCONF /**/
350 /*#define HAS_FPATHCONF /**/
353 * This symbol, if defined, indicates that the pause routine is
354 * available to suspend a process until a signal is received.
356 #define HAS_PAUSE /**/
359 * This symbol, if defined, indicates that the pipe routine is
360 * available to create an inter-process channel.
362 #define HAS_PIPE /**/
365 * This symbol, if defined, indicates that the poll routine is
366 * available to poll active file descriptors. You may safely
367 * include <poll.h> when this symbol is defined.
369 /*#define HAS_POLL /**/
372 * This symbol, if defined, indicates that the readdir routine is
373 * available to read directory entries. You may have to include
374 * <dirent.h>. See I_DIRENT.
376 #define HAS_READDIR /**/
379 * This symbol, if defined, indicates that the seekdir routine is
380 * available. You may have to include <dirent.h>. See I_DIRENT.
382 #define HAS_SEEKDIR /**/
385 * This symbol, if defined, indicates that the telldir routine is
386 * available. You may have to include <dirent.h>. See I_DIRENT.
388 #define HAS_TELLDIR /**/
391 * This symbol, if defined, indicates that the rewinddir routine is
392 * available. You may have to include <dirent.h>. See I_DIRENT.
394 #define HAS_REWINDDIR /**/
397 * This symbol, if defined, indicates that the readlink routine is
398 * available to read the value of a symbolic link.
400 /*#define HAS_READLINK /**/
403 * This symbol, if defined, indicates that the rename routine is available
404 * to rename files. Otherwise you should do the unlink(), link(), unlink()
407 #define HAS_RENAME /**/
410 * This symbol, if defined, indicates that the rmdir routine is
411 * available to remove directories. Otherwise you should fork off a
412 * new process to exec /bin/rmdir.
414 #define HAS_RMDIR /**/
417 * This symbol, if defined, indicates that the select routine is
418 * available to select active file descriptors. If the timeout field
419 * is used, <sys/time.h> may need to be included.
421 #define HAS_SELECT /**/
424 * This symbol, if defined, indicates that the setegid routine is available
425 * to change the effective gid of the current program.
427 /*#define HAS_SETEGID /**/
430 * This symbol, if defined, indicates that the seteuid routine is available
431 * to change the effective uid of the current program.
433 /*#define HAS_SETEUID /**/
436 * This symbol, if defined, indicates that the setlinebuf routine is
437 * available to change stderr or stdout from block-buffered or unbuffered
438 * to a line-buffered mode.
440 /*#define HAS_SETLINEBUF /**/
443 * This symbol, if defined, indicates that the setlocale routine is
444 * available to handle locale-specific ctype implementations.
446 #define HAS_SETLOCALE /**/
449 * This symbol, if defined, indicates that the setpgid(pid, gpid)
450 * routine is available to set process group ID.
452 /*#define HAS_SETPGID /**/
455 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
456 * routine is available to set the current process group.
458 /*#define HAS_SETPGRP2 /**/
461 * This symbol, if defined, indicates that the setpriority routine is
462 * available to set a process's priority.
464 /*#define HAS_SETPRIORITY /**/
467 * This symbol, if defined, indicates that the setregid routine is
468 * available to change the real and effective gid of the current
472 * This symbol, if defined, indicates that the setresgid routine is
473 * available to change the real, effective and saved gid of the current
476 /*#define HAS_SETREGID /**/
477 /*#define HAS_SETRESGID /**/
480 * This symbol, if defined, indicates that the setreuid routine is
481 * available to change the real and effective uid of the current
485 * This symbol, if defined, indicates that the setresuid routine is
486 * available to change the real, effective and saved uid of the current
489 /*#define HAS_SETREUID /**/
490 /*#define HAS_SETRESUID /**/
493 * This symbol, if defined, indicates that the setrgid routine is available
494 * to change the real gid of the current program.
496 /*#define HAS_SETRGID /**/
499 * This symbol, if defined, indicates that the setruid routine is available
500 * to change the real uid of the current program.
502 /*#define HAS_SETRUID /**/
505 * This symbol, if defined, indicates that the setsid routine is
506 * available to set the process group ID.
508 /*#define HAS_SETSID /**/
511 * This symbol is defined to indicate that the strchr()/strrchr()
512 * functions are available for string searching. If not, try the
513 * index()/rindex() pair.
516 * This symbol is defined to indicate that the index()/rindex()
517 * functions are available for string searching.
519 #define HAS_STRCHR /**/
520 /*#define HAS_INDEX /**/
523 * This symbol, if defined, indicates that the strcoll routine is
524 * available to compare strings using collating information.
526 #define HAS_STRCOLL /**/
529 * This symbol, if defined, indicates that this C compiler knows how
530 * to copy structures. If undefined, you'll need to use a block copy
531 * routine of some sort instead.
533 #define USE_STRUCT_COPY /**/
536 * This symbol, if defined, indicates that the strtod routine is
537 * available to provide better numeric string conversion than atof().
539 #define HAS_STRTOD /**/
542 * This symbol, if defined, indicates that the strtol routine is available
543 * to provide better numeric string conversion than atoi() and friends.
545 #define HAS_STRTOL /**/
548 * This symbol, if defined, indicates that the strxfrm() routine is
549 * available to transform strings.
551 #define HAS_STRXFRM /**/
554 * This symbol, if defined, indicates that the symlink routine is available
555 * to create symbolic links.
557 /*#define HAS_SYMLINK /**/
560 * This symbol, if defined, indicates that the syscall routine is
561 * available to call arbitrary system calls. If undefined, that's tough.
563 /*#define HAS_SYSCALL /**/
566 * This symbol, if defined, indicates that sysconf() is available
567 * to determine system related limits and options.
569 /*#define HAS_SYSCONF /**/
572 * This symbol, if defined, indicates that the system routine is
573 * available to issue a shell command.
575 #define HAS_SYSTEM /**/
578 * This symbol, if defined, indicates that the tcgetpgrp routine is
579 * available to get foreground process group ID.
581 /*#define HAS_TCGETPGRP /**/
584 * This symbol, if defined, indicates that the tcsetpgrp routine is
585 * available to set foreground process group ID.
587 /*#define HAS_TCSETPGRP /**/
590 * This symbol, if defined, indicates that the truncate routine is
591 * available to truncate files.
593 /*#define HAS_TRUNCATE /**/
596 * This symbol, if defined, indicates that the tzname[] array is
597 * available to access timezone names.
599 #define HAS_TZNAME /**/
602 * This symbol, if defined, indicates that the umask routine is
603 * available to set and get the value of the file creation mask.
605 #define HAS_UMASK /**/
608 * This symbol, if defined, indicates that the usleep routine is
609 * available to let the process sleep on a sub-second accuracy.
611 /*#define HAS_USLEEP /**/
614 * This symbol, if defined, indicates that the nanosleep system
615 * call is available to let the process sleep with 1E-9 accuracy.
617 /*#define HAS_NANOSLEEP /**/
620 * This symbol, if defined, indicates that this C compiler knows about
621 * the volatile declaration.
623 #define HASVOLATILE /**/
629 * This symbol, if defined, indicates that wait4() exists.
631 /*#define HAS_WAIT4 /**/
634 * This symbol, if defined, indicates that the waitpid routine is
635 * available to wait for child process.
637 #define HAS_WAITPID /**/
640 * This symbol, if defined, indicates that the wcstombs routine is
641 * available to convert wide character strings to multibyte strings.
643 #define HAS_WCSTOMBS /**/
646 * This symbol, if defined, indicates that the wctomb routine is available
647 * to covert a wide character to a multibyte.
649 #define HAS_WCTOMB /**/
652 * This symbol, if defined, indicates to the C program that it should
653 * include <arpa/inet.h> to get inet_addr and friends declarations.
655 #define I_ARPA_INET /**/
658 * This symbol, if defined, indicates that <dbm.h> exists and should
662 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
663 * should be included.
666 #define I_RPCSVC_DBM /**/
669 * This symbol, if defined, indicates to the C program that it should
670 * include <dirent.h>. Using this symbol also triggers the definition
671 * of the Direntry_t define which ends up being 'struct dirent' or
672 * 'struct direct' depending on the availability of <dirent.h>.
675 * This symbol, if defined, indicates to the C program that the length
676 * of directory entry names is provided by a d_namlen field. Otherwise
677 * you need to do strlen() on the d_name field.
680 * This symbol is set to 'struct direct' or 'struct dirent' depending on
681 * whether dirent is available or not. You should use this pseudo type to
682 * portably declare your directory entries.
684 #define I_DIRENT /**/
685 #define DIRNAMLEN /**/
686 #define Direntry_t struct direct
689 * This symbol, if defined, indicates that <dlfcn.h> exists and should
695 * This manifest constant tells the C program to include <fcntl.h>.
700 * This symbol, if defined, indicates to the C program that it should
701 * include <float.h> to get definition of symbols like DBL_MAX or
702 * DBL_MIN, i.e. machine dependent floating point values.
707 * This symbol, if defined, indicates to the C program that it should
708 * include <limits.h> to get definition of symbols like WORD_BIT or
709 * LONG_MAX, i.e. machine dependant limitations.
711 #define I_LIMITS /**/
714 * This symbol, if defined, indicates to the C program that it should
715 * include <locale.h>.
717 #define I_LOCALE /**/
720 * This symbol, if defined, indicates to the C program that it should
726 * This symbol, if defined, indicates to the C program that it should
727 * include <memory.h>.
729 /*#define I_MEMORY /**/
732 * This symbol, if defined, indicates that <net/errno.h> exists and
733 * should be included.
735 /*#define I_NET_ERRNO /**/
738 * This symbol, if defined, indicates to the C program that it should
739 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
741 /*#define I_NETINET_IN /**/
744 * This symbol, if defined, indicates to the C program that it should
747 /*#define I_SFIO /**/
750 * This symbol, if defined, indicates that <stddef.h> exists and should
753 #define I_STDDEF /**/
756 * This symbol, if defined, indicates that <stdlib.h> exists and should
759 #define I_STDLIB /**/
762 * This symbol, if defined, indicates to the C program that it should
763 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
765 #define I_STRING /**/
768 * This symbol, if defined, indicates to the C program that it should
769 * include <sys/dir.h>.
771 /*#define I_SYS_DIR /**/
774 * This symbol, if defined, indicates to the C program that it should
775 * include <sys/file.h> to get definition of R_OK and friends.
777 /*#define I_SYS_FILE /**/
780 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
781 * be included. Otherwise, include <sgtty.h> or <termio.h>.
784 * This symbol, if defined, indicates the <sys/sockio.h> should be included
785 * to get socket ioctl options, like SIOCATMARK.
787 /*#define I_SYS_IOCTL /**/
788 /*#define I_SYS_SOCKIO /**/
791 * This symbol, if defined, indicates to the C program that it should
792 * include <sys/ndir.h>.
794 /*#define I_SYS_NDIR /**/
797 * This symbol, if defined, indicates to the C program that it should
798 * include <sys/param.h>.
800 /*#define I_SYS_PARAM /**/
803 * This symbol, if defined, indicates to the C program that it should
804 * include <sys/resource.h>.
806 /*#define I_SYS_RESOURCE /**/
809 * This symbol, if defined, indicates to the C program that it should
810 * include <sys/select.h> in order to get definition of struct timeval.
812 /*#define I_SYS_SELECT /**/
815 * This symbol, if defined, indicates to the C program that it should
816 * include <sys/stat.h>.
818 #define I_SYS_STAT /**/
821 * This symbol, if defined, indicates to the C program that it should
822 * include <sys/times.h>.
824 /*#define I_SYS_TIMES /**/
827 * This symbol, if defined, indicates to the C program that it should
828 * include <sys/types.h>.
830 #define I_SYS_TYPES /**/
833 * This symbol, if defined, indicates to the C program that it should
834 * include <sys/un.h> to get UNIX domain socket definitions.
836 /*#define I_SYS_UN /**/
839 * This symbol, if defined, indicates to the C program that it should
840 * include <sys/wait.h>.
842 /*#define I_SYS_WAIT /**/
845 * This symbol, if defined, indicates that the program should include
846 * <termio.h> rather than <sgtty.h>. There are also differences in
847 * the ioctl() calls that depend on the value of this symbol.
850 * This symbol, if defined, indicates that the program should include
851 * the POSIX termios.h rather than sgtty.h or termio.h.
852 * There are also differences in the ioctl() calls that depend on the
853 * value of this symbol.
856 * This symbol, if defined, indicates that the program should include
857 * <sgtty.h> rather than <termio.h>. There are also differences in
858 * the ioctl() calls that depend on the value of this symbol.
860 /*#define I_TERMIO /**/
861 /*#define I_TERMIOS /**/
862 /*#define I_SGTTY /**/
865 * This symbol, if defined, indicates to the C program that it should
866 * include <unistd.h>.
868 /*#define I_UNISTD /**/
871 * This symbol, if defined, indicates to the C program that it should
877 * This symbol, if defined, indicates to the C program that it should
878 * include <values.h> to get definition of symbols like MINFLOAT or
879 * MAXLONG, i.e. machine dependant limitations. Probably, you
880 * should use <limits.h> instead, if it is available.
882 /*#define I_VALUES /**/
885 * This symbol, if defined, indicates to the C program that it should
888 /*#define I_VFORK /**/
891 * This symbol contains the value of sizeof(int) so that the C
892 * preprocessor can make decisions based on it.
895 * This symbol contains the value of sizeof(long) so that the C
896 * preprocessor can make decisions based on it.
899 * This symbol contains the value of sizeof(short) so that the C
900 * preprocessor can make decisions based on it.
902 #define INTSIZE 4 /**/
903 #define LONGSIZE 4 /**/
904 #define SHORTSIZE 2 /**/
907 * This symbol, if defined, signifies that the build
908 * process will produce some binary files that are going to be
909 * used in a cross-platform environment. This is the case for
910 * example with the NeXT "fat" binaries that contain executables
913 /*#define MULTIARCH /**/
916 * This symbol, if defined, tells that there's a 64-bit integer type,
917 * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
918 * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
920 /*#define HAS_QUAD /**/
922 # define Quad_t __int64 /**/
923 # define Uquad_t unsigned __int64 /**/
924 # define QUADKIND 5 /**/
925 # define QUAD_IS_INT 1
926 # define QUAD_IS_LONG 2
927 # define QUAD_IS_LONG_LONG 3
928 # define QUAD_IS_INT64_T 4
932 * This symbol, if defined, indicates that the accessx routine is
933 * available to do extended access checks.
935 /*#define HAS_ACCESSX /**/
938 * This symbol, if defined, indicates that the eaccess routine is
939 * available to do extended access checks.
941 /*#define HAS_EACCESS /**/
944 * This symbol, if defined, indicates to the C program that it should
945 * include <sys/access.h>.
947 /*#define I_SYS_ACCESS /**/
950 * This symbol, if defined, indicates to the C program that it should
951 * include <sys/security.h>.
953 /*#define I_SYS_SECURITY /**/
956 * This symbol contains the name of the operating system, as determined
957 * by Configure. You shouldn't rely on it too much; the specific
958 * feature tests from Configure are generally more reliable.
961 * This symbol contains the version of the operating system, as determined
962 * by Configure. You shouldn't rely on it too much; the specific
963 * feature tests from Configure are generally more reliable.
965 #define OSNAME "MSWin32" /**/
966 #define OSVERS "4.0" /**/
969 * This symbol contains the number of bytes required to align a
970 * double, or a long double when applicable. Usual values are 2,
971 * 4 and 8. The default is eight, for safety.
973 #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
974 # define MEM_ALIGNBYTES 8
976 #define MEM_ALIGNBYTES 8
980 * This variable, if defined, holds the name of the directory in
981 * which the user wants to put architecture-dependent public
982 * library files for perl5. It is most often a local directory
983 * such as /usr/local/lib. Programs using this variable must be
984 * prepared to deal with filename expansion. If ARCHLIB is the
985 * same as PRIVLIB, it is not defined, since presumably the
986 * program already searches PRIVLIB.
989 * This symbol contains the ~name expanded version of ARCHLIB, to be used
990 * in programs that are not prepared to deal with ~ expansion at run-time.
992 #define ARCHLIB "c:\\perl\\5.8.0\\lib\\MSWin32-x86-multi-thread" /**/
993 /*#define ARCHLIB_EXP "" /**/
996 * This symbol holds a string representing the architecture name.
997 * It may be used to construct an architecture-dependant pathname
998 * where library files may be held under a private library, for
1001 #define ARCHNAME "MSWin32-x86-multi-thread" /**/
1004 * This symbol, if defined, indicates that the atolf routine is
1005 * available to convert strings into long doubles.
1007 /*#define HAS_ATOLF /**/
1010 * This symbol, if defined, indicates that the atoll routine is
1011 * available to convert strings into long longs.
1013 /*#define HAS_ATOLL /**/
1016 * This symbol holds the path of the bin directory where the package will
1017 * be installed. Program must be prepared to deal with ~name substitution.
1020 * This symbol is the filename expanded version of the BIN symbol, for
1021 * programs that do not want to deal with that at run-time.
1023 #define BIN "c:\\perl\\5.8.0\\bin\\MSWin32-x86-multi-thread" /**/
1024 #define BIN_EXP "c:\\perl\\5.8.0\\bin\\MSWin32-x86-multi-thread" /**/
1027 * This symbol holds the hexadecimal constant defined in byteorder,
1028 * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
1029 * If the compiler supports cross-compiling or multiple-architecture
1030 * binaries (eg. on NeXT systems), use compiler-defined macros to
1031 * determine the byte order.
1032 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
1033 * Binaries (MAB) on either big endian or little endian machines.
1034 * The endian-ness is available at compile-time. This only matters
1035 * for perl, where the config.h can be generated and installed on
1036 * one system, and used by a different architecture to build an
1037 * extension. Older versions of NeXT that might not have
1038 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1039 * so the default case (for NeXT) is big endian to catch them.
1040 * This might matter for NeXT 3.0.
1042 #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
1043 # ifdef __LITTLE_ENDIAN__
1045 # define BYTEORDER 0x1234
1048 # define BYTEORDER 0x12345678
1052 # ifdef __BIG_ENDIAN__
1054 # define BYTEORDER 0x4321
1057 # define BYTEORDER 0x87654321
1062 # if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
1063 # define BYTEORDER 0x4321
1066 #define BYTEORDER 0x1234 /* large digits for MSB */
1070 * This macro catenates 2 tokens together.
1073 * This macro surrounds its token with double quotes.
1076 #define CAT2(a,b) a/**/b
1077 #define STRINGIFY(a) "a"
1078 /* If you can get stringification with catify, tell me how! */
1081 #define PeRl_CaTiFy(a, b) a ## b
1082 #define PeRl_StGiFy(a) #a
1083 /* the additional level of indirection enables these macros to be
1084 * used as arguments to other macros. See K&R 2nd ed., page 231. */
1085 #define CAT2(a,b) PeRl_CaTiFy(a,b)
1086 #define StGiFy(a) PeRl_StGiFy(a)
1087 #define STRINGIFY(a) PeRl_StGiFy(a)
1089 #if 42 != 1 && 42 != 42
1090 # include "Bletch: How does this C preprocessor catenate tokens?"
1094 * This symbol contains the first part of the string which will invoke
1095 * the C preprocessor on the standard input and produce to standard
1096 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
1097 * call a wrapper. See CPPRUN.
1100 * This symbol contains the second part of the string which will invoke
1101 * the C preprocessor on the standard input and produce to standard
1102 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
1103 * to specify standard input, otherwise the value is "".
1106 * This symbol contains the string which will invoke a C preprocessor on
1107 * the standard input and produce to standard output. It needs to end
1108 * with CPPLAST, after all other preprocessor flags have been specified.
1109 * The main difference with CPPSTDIN is that this program will never be a
1110 * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
1111 * available directly to the user. Note that it may well be different from
1112 * the preprocessor used to compile the C program.
1115 * This symbol is intended to be used along with CPPRUN in the same manner
1116 * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
1118 #define CPPSTDIN "cppstdin"
1120 #define CPPRUN "cpp32 -oCON"
1124 * This symbol, if defined, indicates that the _fwalk system call is
1125 * available to apply a function to all the file handles.
1127 /*#define HAS__FWALK /**/
1130 * This manifest constant lets the C program know that the access()
1131 * system call is available to check for accessibility using real UID/GID.
1132 * (always present on UNIX.)
1134 #define HAS_ACCESS /**/
1137 * This symbol, if defined, indicates that the asctime_r routine
1138 * is available to asctime re-entrantly.
1141 * This symbol encodes the prototype of asctime_r.
1143 /*#define HAS_ASCTIME_R /**/
1144 #define ASCTIME_R_PROTO 0 /**/
1147 * This symbol is defined if the C compiler can cast negative
1148 * or large floating point numbers to 32-bit ints.
1150 #define CASTI32 /**/
1153 * This symbol is defined if the C compiler can cast negative
1154 * numbers to unsigned longs, ints and shorts.
1157 * This symbol contains flags that say what difficulties the compiler
1158 * has casting odd floating values to unsigned long:
1160 * 1 = couldn't cast < 0
1161 * 2 = couldn't cast >= 0x80000000
1162 * 4 = couldn't cast in argument expression list
1164 #define CASTNEGFLOAT /**/
1165 #define CASTFLAGS 0 /**/
1168 * This symbol, if defined, indicates that the class routine is
1169 * available to classify doubles. Available for example in AIX.
1170 * The returned values are defined in <float.h> and are:
1172 * FP_PLUS_NORM Positive normalized, nonzero
1173 * FP_MINUS_NORM Negative normalized, nonzero
1174 * FP_PLUS_DENORM Positive denormalized, nonzero
1175 * FP_MINUS_DENORM Negative denormalized, nonzero
1177 * FP_MINUS_ZERO -0.0
1180 * FP_NANS Signaling Not a Number (NaNS)
1181 * FP_NANQ Quiet Not a Number (NaNQ)
1183 /*#define HAS_CLASS /**/
1186 * This symbol, if defined, indicates that the closedir() routine
1187 * does not return a value.
1189 /*#define VOID_CLOSEDIR /**/
1191 /* HAS_STRUCT_CMSGHDR:
1192 * This symbol, if defined, indicates that the struct cmsghdr
1195 /*#define HAS_STRUCT_CMSGHDR /**/
1198 * This symbol, if defined, indicates that the crypt_r routine
1199 * is available to crypt re-entrantly.
1202 * This symbol encodes the prototype of crypt_r.
1204 /*#define HAS_CRYPT_R /**/
1205 #define CRYPT_R_PROTO 0 /**/
1208 * This symbol, if defined, indicates that the C-shell exists.
1211 * This symbol, if defined, contains the full pathname of csh.
1213 /*#define HAS_CSH /**/
1219 * This symbol, if defined, indicates that the ctime_r routine
1220 * is available to ctime re-entrantly.
1223 * This symbol encodes the prototype of ctime_r.
1225 /*#define HAS_CTIME_R /**/
1226 #define CTIME_R_PROTO 0 /**/
1228 /* DLSYM_NEEDS_UNDERSCORE:
1229 * This symbol, if defined, indicates that we need to prepend an
1230 * underscore to the symbol name before calling dlsym(). This only
1231 * makes sense if you *have* dlsym, which we will presume is the
1232 * case if you're using dl_dlopen.xs.
1234 /*#define DLSYM_NEEDS_UNDERSCORE /**/
1237 * This symbol, if defined, indicates that the drand48_r routine
1238 * is available to drand48 re-entrantly.
1241 * This symbol encodes the prototype of drand48_r.
1243 /*#define HAS_DRAND48_R /**/
1244 #define DRAND48_R_PROTO 0 /**/
1246 /* HAS_DRAND48_PROTO:
1247 * This symbol, if defined, indicates that the system provides
1248 * a prototype for the drand48() function. Otherwise, it is up
1249 * to the program to supply one. A good guess is
1250 * extern double drand48(void);
1252 /*#define HAS_DRAND48_PROTO /**/
1255 * This symbol, if defined, indicates that the getgrent routine is
1256 * available for finalizing sequential access of the group database.
1258 /*#define HAS_ENDGRENT /**/
1261 * This symbol, if defined, indicates that the endgrent_r routine
1262 * is available to endgrent re-entrantly.
1264 /* ENDGRENT_R_PROTO:
1265 * This symbol encodes the prototype of endgrent_r.
1267 /*#define HAS_ENDGRENT_R /**/
1268 #define ENDGRENT_R_PROTO 0 /**/
1271 * This symbol, if defined, indicates that the endhostent() routine is
1272 * available to close whatever was being used for host queries.
1274 /*#define HAS_ENDHOSTENT /**/
1277 * This symbol, if defined, indicates that the endnetent() routine is
1278 * available to close whatever was being used for network queries.
1280 /*#define HAS_ENDNETENT /**/
1283 * This symbol, if defined, indicates that the endprotoent() routine is
1284 * available to close whatever was being used for protocol queries.
1286 /*#define HAS_ENDPROTOENT /**/
1289 * This symbol, if defined, indicates that the getgrent routine is
1290 * available for finalizing sequential access of the passwd database.
1292 /*#define HAS_ENDPWENT /**/
1295 * This symbol, if defined, indicates that the endpwent_r routine
1296 * is available to endpwent re-entrantly.
1298 /* ENDPWENT_R_PROTO:
1299 * This symbol encodes the prototype of endpwent_r.
1301 /*#define HAS_ENDPWENT_R /**/
1302 #define ENDPWENT_R_PROTO 0 /**/
1305 * This symbol, if defined, indicates that the endservent() routine is
1306 * available to close whatever was being used for service queries.
1308 /*#define HAS_ENDSERVENT /**/
1311 * This symbol, if defined, indicates that the fchdir routine is
1312 * available to change directory using a file descriptor.
1314 /*#define HAS_FCHDIR /**/
1317 * This symbol, if defined, indicates that fcntl() can be used
1318 * for file locking. Normally on Unix systems this is defined.
1319 * It may be undefined on VMS.
1321 /*#define FCNTL_CAN_LOCK /**/
1324 * This symbol, when defined, indicates presence of the fd_set typedef
1327 #define HAS_FD_SET /**/
1330 * This symbol, if defined, indicates that the finite routine is
1331 * available to check whether a double is finite (non-infinity non-NaN).
1333 /*#define HAS_FINITE /**/
1336 * This symbol, if defined, indicates that the finitel routine is
1337 * available to check whether a long double is finite
1338 * (non-infinity non-NaN).
1340 /*#define HAS_FINITEL /**/
1343 * This symbol, if defined, indicates that the system supports filenames
1344 * longer than 14 characters.
1346 #define FLEXFILENAMES /**/
1349 * This symbol, if defined, indicates that the fp_class routine is
1350 * available to classify doubles. Available for example in Digital UNIX.
1351 * The returned values are defined in <math.h> and are:
1353 * FP_SNAN Signaling NaN (Not-a-Number)
1354 * FP_QNAN Quiet NaN (Not-a-Number)
1355 * FP_POS_INF +infinity
1356 * FP_NEG_INF -infinity
1357 * FP_POS_NORM Positive normalized
1358 * FP_NEG_NORM Negative normalized
1359 * FP_POS_DENORM Positive denormalized
1360 * FP_NEG_DENORM Negative denormalized
1361 * FP_POS_ZERO +0.0 (positive zero)
1362 * FP_NEG_ZERO -0.0 (negative zero)
1364 /*#define HAS_FP_CLASS /**/
1367 * This symbol, if defined, indicates that the fpclass routine is
1368 * available to classify doubles. Available for example in Solaris/SVR4.
1369 * The returned values are defined in <ieeefp.h> and are:
1371 * FP_SNAN signaling NaN
1373 * FP_NINF negative infinity
1374 * FP_PINF positive infinity
1375 * FP_NDENORM negative denormalized non-zero
1376 * FP_PDENORM positive denormalized non-zero
1377 * FP_NZERO negative zero
1378 * FP_PZERO positive zero
1379 * FP_NNORM negative normalized non-zero
1380 * FP_PNORM positive normalized non-zero
1382 /*#define HAS_FPCLASS /**/
1385 * This symbol, if defined, indicates that the fpclassify routine is
1386 * available to classify doubles. Available for example in HP-UX.
1387 * The returned values are defined in <math.h> and are
1389 * FP_NORMAL Normalized
1391 * FP_INFINITE Infinity
1392 * FP_SUBNORMAL Denormalized
1396 /*#define HAS_FPCLASSIFY /**/
1399 * This symbol will be defined if the C compiler supports fpos64_t.
1401 /*#define HAS_FPOS64_T /**/
1404 * This symbol, if defined, indicates that the frexpl routine is
1405 * available to break a long double floating-point number into
1406 * a normalized fraction and an integral power of 2.
1408 /*#define HAS_FREXPL /**/
1410 /* HAS_STRUCT_FS_DATA:
1411 * This symbol, if defined, indicates that the struct fs_data
1412 * to do statfs() is supported.
1414 /*#define HAS_STRUCT_FS_DATA /**/
1417 * This symbol, if defined, indicates that the fseeko routine is
1418 * available to fseek beyond 32 bits (useful for ILP32 hosts).
1420 /*#define HAS_FSEEKO /**/
1423 * This symbol, if defined, indicates that the fstatfs routine is
1424 * available to stat filesystems by file descriptors.
1426 /*#define HAS_FSTATFS /**/
1429 * This symbol, if defined, indicates that the fsync routine is
1430 * available to write a file's modified data and attributes to
1431 * permanent storage.
1433 /*#define HAS_FSYNC /**/
1436 * This symbol, if defined, indicates that the ftello routine is
1437 * available to ftell beyond 32 bits (useful for ILP32 hosts).
1439 /*#define HAS_FTELLO /**/
1442 * This preprocessor macro is defined to convert a floating point
1443 * number to a string without a trailing decimal point. This
1444 * emulates the behavior of sprintf("%g"), but is sometimes much more
1445 * efficient. If gconvert() is not available, but gcvt() drops the
1446 * trailing decimal point, then gcvt() is used. If all else fails,
1447 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1448 * macro are: value, number of digits, whether trailing zeros should
1449 * be retained, and the output buffer.
1450 * The usual values are:
1451 * d_Gconvert='gconvert((x),(n),(t),(b))'
1452 * d_Gconvert='gcvt((x),(n),(b))'
1453 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1454 * The last two assume trailing zeros should not be kept.
1456 #define Gconvert(x,n,t,b) gcvt((x),(n),(b))
1459 * This symbol, if defined, indicates that the getcwd routine is
1460 * available to get the current working directory.
1462 #define HAS_GETCWD /**/
1465 * This symbol, if defined, indicates that the getespwnam system call is
1466 * available to retrieve enchanced (shadow) password entries by name.
1468 /*#define HAS_GETESPWNAM /**/
1471 * This symbol, if defined, indicates that the getfsstat routine is
1472 * available to stat filesystems in bulk.
1474 /*#define HAS_GETFSSTAT /**/
1477 * This symbol, if defined, indicates that the getgrent routine is
1478 * available for sequential access of the group database.
1480 /*#define HAS_GETGRENT /**/
1483 * This symbol, if defined, indicates that the getgrent_r routine
1484 * is available to getgrent re-entrantly.
1486 /* GETGRENT_R_PROTO:
1487 * This symbol encodes the prototype of getgrent_r.
1489 /*#define HAS_GETGRENT_R /**/
1490 #define GETGRENT_R_PROTO 0 /**/
1493 * This symbol, if defined, indicates that the getgrgid_r routine
1494 * is available to getgrgid re-entrantly.
1496 /* GETGRGID_R_PROTO:
1497 * This symbol encodes the prototype of getgrgid_r.
1499 /*#define HAS_GETGRGID_R /**/
1500 #define GETGRGID_R_PROTO 0 /**/
1503 * This symbol, if defined, indicates that the getgrnam_r routine
1504 * is available to getgrnam re-entrantly.
1506 /* GETGRNAM_R_PROTO:
1507 * This symbol encodes the prototype of getgrnam_r.
1509 /*#define HAS_GETGRNAM_R /**/
1510 #define GETGRNAM_R_PROTO 0 /**/
1512 /* HAS_GETHOSTBYADDR:
1513 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1514 * available to look up hosts by their IP addresses.
1516 #define HAS_GETHOSTBYADDR /**/
1518 /* HAS_GETHOSTBYNAME:
1519 * This symbol, if defined, indicates that the gethostbyname() routine is
1520 * available to look up host names in some data base or other.
1522 #define HAS_GETHOSTBYNAME /**/
1525 * This symbol, if defined, indicates that the gethostent() routine is
1526 * available to look up host names in some data base or another.
1528 /*#define HAS_GETHOSTENT /**/
1531 * This symbol, if defined, indicates that the C program may use the
1532 * gethostname() routine to derive the host name. See also HAS_UNAME
1536 * This symbol, if defined, indicates that the C program may use the
1537 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
1541 * This symbol, if defined, indicates the command to feed to the
1542 * popen() routine to derive the host name. See also HAS_GETHOSTNAME
1543 * and HAS_UNAME. Note that the command uses a fully qualified path,
1544 * so that it is safe even if used by a process with super-user
1548 * This symbol, if defined, indicates that the C program may use the
1549 * contents of PHOSTNAME as a command to feed to the popen() routine
1550 * to derive the host name.
1552 #define HAS_GETHOSTNAME /**/
1553 #define HAS_UNAME /**/
1554 /*#define HAS_PHOSTNAME /**/
1555 #ifdef HAS_PHOSTNAME
1556 #define PHOSTNAME "" /* How to get the host name */
1559 /* HAS_GETHOST_PROTOS:
1560 * This symbol, if defined, indicates that <netdb.h> includes
1561 * prototypes for gethostent(), gethostbyname(), and
1562 * gethostbyaddr(). Otherwise, it is up to the program to guess
1563 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1565 #define HAS_GETHOST_PROTOS /**/
1568 * This symbol, if defined, indicates that the getitimer routine is
1569 * available to return interval timers.
1571 /*#define HAS_GETITIMER /**/
1574 * This symbol, if defined, indicates that the getlogin_r routine
1575 * is available to getlogin re-entrantly.
1577 /* GETLOGIN_R_PROTO:
1578 * This symbol encodes the prototype of getlogin_r.
1580 /*#define HAS_GETLOGIN_R /**/
1581 #define GETLOGIN_R_PROTO 0 /**/
1584 * This symbol, if defined, indicates that the getmnt routine is
1585 * available to get filesystem mount info by filename.
1587 /*#define HAS_GETMNT /**/
1590 * This symbol, if defined, indicates that the getmntent routine is
1591 * available to iterate through mounted file systems to get their info.
1593 /*#define HAS_GETMNTENT /**/
1595 /* HAS_GETNETBYADDR:
1596 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1597 * available to look up networks by their IP addresses.
1599 /*#define HAS_GETNETBYADDR /**/
1601 /* HAS_GETNETBYNAME:
1602 * This symbol, if defined, indicates that the getnetbyname() routine is
1603 * available to look up networks by their names.
1605 /*#define HAS_GETNETBYNAME /**/
1608 * This symbol, if defined, indicates that the getnetent() routine is
1609 * available to look up network names in some data base or another.
1611 /*#define HAS_GETNETENT /**/
1613 /* HAS_GETNET_PROTOS:
1614 * This symbol, if defined, indicates that <netdb.h> includes
1615 * prototypes for getnetent(), getnetbyname(), and
1616 * getnetbyaddr(). Otherwise, it is up to the program to guess
1617 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1619 /*#define HAS_GETNET_PROTOS /**/
1622 * This symbol, if defined, indicates that the getpagesize system call
1623 * is available to get system page size, which is the granularity of
1624 * many memory management calls.
1626 /*#define HAS_GETPAGESIZE /**/
1629 * This symbol, if defined, indicates that the getprotoent() routine is
1630 * available to look up protocols in some data base or another.
1632 /*#define HAS_GETPROTOENT /**/
1635 * This symbol, if defined, indicates that the getpgrp routine is
1636 * available to get the current process group.
1639 * This symbol, if defined, indicates that getpgrp needs one
1640 * arguments whereas USG one needs none.
1642 /*#define HAS_GETPGRP /**/
1643 /*#define USE_BSD_GETPGRP /**/
1645 /* HAS_GETPROTOBYNAME:
1646 * This symbol, if defined, indicates that the getprotobyname()
1647 * routine is available to look up protocols by their name.
1649 /* HAS_GETPROTOBYNUMBER:
1650 * This symbol, if defined, indicates that the getprotobynumber()
1651 * routine is available to look up protocols by their number.
1653 #define HAS_GETPROTOBYNAME /**/
1654 #define HAS_GETPROTOBYNUMBER /**/
1656 /* HAS_GETPROTO_PROTOS:
1657 * This symbol, if defined, indicates that <netdb.h> includes
1658 * prototypes for getprotoent(), getprotobyname(), and
1659 * getprotobyaddr(). Otherwise, it is up to the program to guess
1660 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1662 #define HAS_GETPROTO_PROTOS /**/
1665 * This symbol, if defined, indicates that the getprpwnam system call is
1666 * available to retrieve protected (shadow) password entries by name.
1668 /*#define HAS_GETPRPWNAM /**/
1671 * This symbol, if defined, indicates that the getpwent routine is
1672 * available for sequential access of the passwd database.
1673 * If this is not available, the older getpw() function may be available.
1675 /*#define HAS_GETPWENT /**/
1678 * This symbol, if defined, indicates that the getpwent_r routine
1679 * is available to getpwent re-entrantly.
1681 /* GETPWENT_R_PROTO:
1682 * This symbol encodes the prototype of getpwent_r.
1684 /*#define HAS_GETPWENT_R /**/
1685 #define GETPWENT_R_PROTO 0 /**/
1688 * This symbol, if defined, indicates that the getpwnam_r routine
1689 * is available to getpwnam re-entrantly.
1691 /* GETPWNAM_R_PROTO:
1692 * This symbol encodes the prototype of getpwnam_r.
1694 /*#define HAS_GETPWNAM_R /**/
1695 #define GETPWNAM_R_PROTO 0 /**/
1698 * This symbol, if defined, indicates that the getpwuid_r routine
1699 * is available to getpwuid re-entrantly.
1701 /* GETPWUID_R_PROTO:
1702 * This symbol encodes the prototype of getpwuid_r.
1704 /*#define HAS_GETPWUID_R /**/
1705 #define GETPWUID_R_PROTO 0 /**/
1708 * This symbol, if defined, indicates that the getservent() routine is
1709 * available to look up network services in some data base or another.
1711 /*#define HAS_GETSERVENT /**/
1713 /* HAS_GETSERV_PROTOS:
1714 * This symbol, if defined, indicates that <netdb.h> includes
1715 * prototypes for getservent(), getservbyname(), and
1716 * getservbyaddr(). Otherwise, it is up to the program to guess
1717 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1719 #define HAS_GETSERV_PROTOS /**/
1722 * This symbol, if defined, indicates that the getspnam system call is
1723 * available to retrieve SysV shadow password entries by name.
1725 /*#define HAS_GETSPNAM /**/
1728 * This symbol, if defined, indicates that the getspnam_r routine
1729 * is available to getspnam re-entrantly.
1731 /* GETSPNAM_R_PROTO:
1732 * This symbol encodes the prototype of getspnam_r.
1734 /*#define HAS_GETSPNAM_R /**/
1735 #define GETSPNAM_R_PROTO 0 /**/
1737 /* HAS_GETSERVBYNAME:
1738 * This symbol, if defined, indicates that the getservbyname()
1739 * routine is available to look up services by their name.
1741 /* HAS_GETSERVBYPORT:
1742 * This symbol, if defined, indicates that the getservbyport()
1743 * routine is available to look up services by their port.
1745 #define HAS_GETSERVBYNAME /**/
1746 #define HAS_GETSERVBYPORT /**/
1749 * This symbol, if defined, indicates that the gmtime_r routine
1750 * is available to gmtime re-entrantly.
1753 * This symbol encodes the prototype of gmtime_r.
1755 /*#define HAS_GMTIME_R /**/
1756 #define GMTIME_R_PROTO 0 /**/
1759 * This symbol, if defined, indicates to the C program that
1760 * the GNU C library is being used. A better check is to use
1761 * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
1763 /*#define HAS_GNULIBC /**/
1764 #if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
1765 # define _GNU_SOURCE
1768 * This symbol, if defined, indicates that the hasmntopt routine is
1769 * available to query the mount options of file systems.
1771 /*#define HAS_HASMNTOPT /**/
1774 * This symbol, if defined, indicates that the htonl() routine (and
1775 * friends htons() ntohl() ntohs()) are available to do network
1776 * order byte swapping.
1779 * This symbol, if defined, indicates that the htons() routine (and
1780 * friends htonl() ntohl() ntohs()) are available to do network
1781 * order byte swapping.
1784 * This symbol, if defined, indicates that the ntohl() routine (and
1785 * friends htonl() htons() ntohs()) are available to do network
1786 * order byte swapping.
1789 * This symbol, if defined, indicates that the ntohs() routine (and
1790 * friends htonl() htons() ntohl()) are available to do network
1791 * order byte swapping.
1793 #define HAS_HTONL /**/
1794 #define HAS_HTONS /**/
1795 #define HAS_NTOHL /**/
1796 #define HAS_NTOHS /**/
1799 * This symbol will defined if the C compiler supports int64_t.
1800 * Usually the <inttypes.h> needs to be included, but sometimes
1801 * <sys/types.h> is enough.
1803 /*#define HAS_INT64_T /**/
1806 * This manifest constant lets the C program know that isascii
1809 #define HAS_ISASCII /**/
1812 * This symbol, if defined, indicates that the isfinite routine is
1813 * available to check whether a double is finite (non-infinity non-NaN).
1815 /*#define HAS_ISFINITE /**/
1818 * This symbol, if defined, indicates that the isinf routine is
1819 * available to check whether a double is an infinity.
1821 /*#define HAS_ISINF /**/
1824 * This symbol, if defined, indicates that the isnan routine is
1825 * available to check whether a double is a NaN.
1827 #define HAS_ISNAN /**/
1830 * This symbol, if defined, indicates that the isnanl routine is
1831 * available to check whether a long double is a NaN.
1833 /*#define HAS_ISNANL /**/
1836 * This symbol, if defined, indicates that the lchown routine is
1837 * available to operate on a symbolic link (instead of following the
1840 /*#define HAS_LCHOWN /**/
1843 * This symbol, if defined, indicates that this system's <float.h>
1844 * or <limits.h> defines the symbol LDBL_DIG, which is the number
1845 * of significant digits in a long double precision number. Unlike
1846 * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
1848 #define HAS_LDBL_DIG /**/
1851 * This symbol, if defined, indicates that the localtime_r routine
1852 * is available to localtime re-entrantly.
1854 /* LOCALTIME_R_PROTO:
1855 * This symbol encodes the prototype of localtime_r.
1857 /*#define HAS_LOCALTIME_R /**/
1858 #define LOCALTIME_R_PROTO 0 /**/
1861 * This symbol will be defined if the C compiler supports long
1865 * This symbol contains the size of a long double, so that the
1866 * C preprocessor can make decisions based on it. It is only
1867 * defined if the system supports long doubles.
1869 #define HAS_LONG_DOUBLE /**/
1870 #ifdef HAS_LONG_DOUBLE
1871 #define LONG_DOUBLESIZE 10 /**/
1875 * This symbol will be defined if the C compiler supports long long.
1878 * This symbol contains the size of a long long, so that the
1879 * C preprocessor can make decisions based on it. It is only
1880 * defined if the system supports long long.
1882 /*#define HAS_LONG_LONG /**/
1883 #ifdef HAS_LONG_LONG
1884 #define LONGLONGSIZE 8 /**/
1888 * This symbol, if defined, indicates that the system provides
1889 * a prototype for the lseek() function. Otherwise, it is up
1890 * to the program to supply one. A good guess is
1891 * extern off_t lseek(int, off_t, int);
1893 #define HAS_LSEEK_PROTO /**/
1896 * This symbol, if defined, indicates that the madvise system call is
1897 * available to map a file into memory.
1899 /*#define HAS_MADVISE /**/
1902 * This symbol, if defined, indicates that the memchr routine is available
1903 * to locate characters within a C string.
1905 #define HAS_MEMCHR /**/
1908 * This symbol, if defined, indicates that the mkdtemp routine is
1909 * available to exclusively create a uniquely named temporary directory.
1911 /*#define HAS_MKDTEMP /**/
1914 * This symbol, if defined, indicates that the mkstemp routine is
1915 * available to exclusively create and open a uniquely named
1918 /*#define HAS_MKSTEMP /**/
1921 * This symbol, if defined, indicates that the mkstemps routine is
1922 * available to excluslvely create and open a uniquely named
1923 * (with a suffix) temporary file.
1925 /*#define HAS_MKSTEMPS /**/
1928 * This symbol, if defined, indicates that the mmap system call is
1929 * available to map a file into memory.
1932 * This symbol holds the return type of the mmap() system call
1933 * (and simultaneously the type of the first argument).
1934 * Usually set to 'void *' or 'cadd_t'.
1936 /*#define HAS_MMAP /**/
1937 #define Mmap_t void * /**/
1940 * This symbol, if defined, indicates that the modfl routine is
1941 * available to split a long double x into a fractional part f and
1942 * an integer part i such that |f| < 1.0 and (f + i) = x.
1944 /* HAS_MODFL_POW32_BUG:
1945 * This symbol, if defined, indicates that the modfl routine is
1946 * broken for long doubles >= pow(2, 32).
1947 * For example from 4294967303.150000 one would get 4294967302.000000
1948 * and 1.150000. The bug has been seen in certain versions of glibc,
1949 * release 2.2.2 is known to be okay.
1951 /*#define HAS_MODFL /**/
1952 /*#define HAS_MODFL_POW32_BUG /**/
1955 * This symbol, if defined, indicates that the mprotect system call is
1956 * available to modify the access protection of a memory mapped file.
1958 /*#define HAS_MPROTECT /**/
1961 * This symbol, if defined, indicates that the entire msg*(2) library is
1962 * supported (IPC mechanism based on message queues).
1964 /*#define HAS_MSG /**/
1966 /* HAS_STRUCT_MSGHDR:
1967 * This symbol, if defined, indicates that the struct msghdr
1970 /*#define HAS_STRUCT_MSGHDR /**/
1973 * This symbol will be defined if the C compiler supports off64_t.
1975 /*#define HAS_OFF64_T /**/
1978 * This manifest constant lets the C program know that the three
1979 * argument form of open(2) is available.
1981 /*#define HAS_OPEN3 /**/
1983 /* OLD_PTHREAD_CREATE_JOINABLE:
1984 * This symbol, if defined, indicates how to create pthread
1985 * in joinable (aka undetached) state. NOTE: not defined
1986 * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
1987 * (the new version of the constant).
1988 * If defined, known values are PTHREAD_CREATE_UNDETACHED
1991 /*#define OLD_PTHREAD_CREATE_JOINABLE /**/
1993 /* HAS_PTHREAD_YIELD:
1994 * This symbol, if defined, indicates that the pthread_yield
1995 * routine is available to yield the execution of the current
1996 * thread. sched_yield is preferable to pthread_yield.
1999 * This symbol defines the way to yield the execution of
2000 * the current thread. Known ways are sched_yield,
2001 * pthread_yield, and pthread_yield with NULL.
2004 * This symbol, if defined, indicates that the sched_yield
2005 * routine is available to yield the execution of the current
2006 * thread. sched_yield is preferable to pthread_yield.
2008 /*#define HAS_PTHREAD_YIELD /**/
2009 #define SCHED_YIELD /**/
2010 /*#define HAS_SCHED_YIELD /**/
2013 * This symbol, if defined, indicates that the random_r routine
2014 * is available to random re-entrantly.
2017 * This symbol encodes the prototype of random_r.
2019 /*#define HAS_RANDOM_R /**/
2020 #define RANDOM_R_PROTO 0 /**/
2023 * This symbol, if defined, indicates that the readdir_r routine
2024 * is available to readdir re-entrantly.
2027 * This symbol encodes the prototype of readdir_r.
2029 /*#define HAS_READDIR_R /**/
2030 #define READDIR_R_PROTO 0 /**/
2033 * This symbol, if defined, indicates that the readv routine is
2034 * available to do gather reads. You will also need <sys/uio.h>
2035 * and there I_SYSUIO.
2037 /*#define HAS_READV /**/
2040 * This symbol, if defined, indicates that the recvmsg routine is
2041 * available to send structured socket messages.
2043 /*#define HAS_RECVMSG /**/
2046 * This symbol, if defined, indicates that the bcopy routine is available
2047 * to copy potentially overlapping memory blocks. Normally, you should
2048 * probably use memmove() or memcpy(). If neither is defined, roll your
2051 /*#define HAS_SAFE_BCOPY /**/
2054 * This symbol, if defined, indicates that the memcpy routine is available
2055 * to copy potentially overlapping memory blocks. If you need to
2056 * copy overlapping memory blocks, you should check HAS_MEMMOVE and
2057 * use memmove() instead, if available.
2059 /*#define HAS_SAFE_MEMCPY /**/
2062 * This symbol, if defined, indicates that the memcmp routine is available
2063 * and can be used to compare relative magnitudes of chars with their high
2064 * bits set. If it is not defined, roll your own version.
2066 #define HAS_SANE_MEMCMP /**/
2069 * This symbol, if defined, indicates that the system provides
2070 * a prototype for the sbrk() function. Otherwise, it is up
2071 * to the program to supply one. Good guesses are
2072 * extern void* sbrk(int);
2073 * extern void* sbrk(size_t);
2075 /*#define HAS_SBRK_PROTO /**/
2078 * This symbol, if defined, indicates that the entire sem*(2) library is
2081 /*#define HAS_SEM /**/
2084 * This symbol, if defined, indicates that the sendmsg routine is
2085 * available to send structured socket messages.
2087 /*#define HAS_SENDMSG /**/
2090 * This symbol, if defined, indicates that the setgrent routine is
2091 * available for initializing sequential access of the group database.
2093 /*#define HAS_SETGRENT /**/
2096 * This symbol, if defined, indicates that the setgrent_r routine
2097 * is available to setgrent re-entrantly.
2099 /* SETGRENT_R_PROTO:
2100 * This symbol encodes the prototype of setgrent_r.
2102 /*#define HAS_SETGRENT_R /**/
2103 #define SETGRENT_R_PROTO 0 /**/
2106 * This symbol, if defined, indicates that the setgroups() routine is
2107 * available to set the list of process groups. If unavailable, multiple
2108 * groups are probably not supported.
2110 /*#define HAS_SETGROUPS /**/
2113 * This symbol, if defined, indicates that the sethostent() routine is
2116 /*#define HAS_SETHOSTENT /**/
2119 * This symbol, if defined, indicates that the setitimer routine is
2120 * available to set interval timers.
2122 /*#define HAS_SETITIMER /**/
2125 * This symbol, if defined, indicates that the setnetent() routine is
2128 /*#define HAS_SETNETENT /**/
2131 * This symbol, if defined, indicates that the setprotoent() routine is
2134 /*#define HAS_SETPROTOENT /**/
2137 * This symbol, if defined, indicates that the setpgrp routine is
2138 * available to set the current process group.
2141 * This symbol, if defined, indicates that setpgrp needs two
2142 * arguments whereas USG one needs none. See also HAS_SETPGID
2143 * for a POSIX interface.
2145 /*#define HAS_SETPGRP /**/
2146 /*#define USE_BSD_SETPGRP /**/
2148 /* HAS_SETPROCTITLE:
2149 * This symbol, if defined, indicates that the setproctitle routine is
2150 * available to set process title.
2152 /*#define HAS_SETPROCTITLE /**/
2155 * This symbol, if defined, indicates that the setpwent routine is
2156 * available for initializing sequential access of the passwd database.
2158 /*#define HAS_SETPWENT /**/
2161 * This symbol, if defined, indicates that the setpwent_r routine
2162 * is available to setpwent re-entrantly.
2164 /* SETPWENT_R_PROTO:
2165 * This symbol encodes the prototype of setpwent_r.
2167 /*#define HAS_SETPWENT_R /**/
2168 #define SETPWENT_R_PROTO 0 /**/
2171 * This symbol, if defined, indicates that the setservent() routine is
2174 /*#define HAS_SETSERVENT /**/
2177 * This symbol, if defined, indicates that the setvbuf routine is
2178 * available to change buffering on an open stdio stream.
2179 * to a line-buffered mode.
2181 #define HAS_SETVBUF /**/
2184 * This symbol, if defined, indicates that sfio should
2187 /*#define USE_SFIO /**/
2190 * This symbol, if defined, indicates that the entire shm*(2) library is
2193 /*#define HAS_SHM /**/
2196 * This symbol, if defined, indicates that Vr4's sigaction() routine
2199 /*#define HAS_SIGACTION /**/
2202 * This variable indicates to the C program that the sigsetjmp()
2203 * routine is available to save the calling process's registers
2204 * and stack environment for later use by siglongjmp(), and
2205 * to optionally save the process's signal mask. See
2206 * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
2209 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
2212 * This macro is used in the same way as sigsetjmp(), but will invoke
2213 * traditional setjmp() if sigsetjmp isn't available.
2214 * See HAS_SIGSETJMP.
2217 * This macro is used in the same way as siglongjmp(), but will invoke
2218 * traditional longjmp() if siglongjmp isn't available.
2219 * See HAS_SIGSETJMP.
2221 /*#define HAS_SIGSETJMP /**/
2222 #ifdef HAS_SIGSETJMP
2223 #define Sigjmp_buf sigjmp_buf
2224 #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
2225 #define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
2227 #define Sigjmp_buf jmp_buf
2228 #define Sigsetjmp(buf,save_mask) setjmp((buf))
2229 #define Siglongjmp(buf,retval) longjmp((buf),(retval))
2233 * This symbol, if defined, indicates that the BSD socket interface is
2237 * This symbol, if defined, indicates that the BSD socketpair() call is
2241 * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
2242 * Checking just with #ifdef might not be enough because this symbol
2243 * has been known to be an enum.
2245 /* HAS_MSG_DONTROUTE:
2246 * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
2247 * Checking just with #ifdef might not be enough because this symbol
2248 * has been known to be an enum.
2251 * This symbol, if defined, indicates that the MSG_OOB is supported.
2252 * Checking just with #ifdef might not be enough because this symbol
2253 * has been known to be an enum.
2256 * This symbol, if defined, indicates that the MSG_PEEK is supported.
2257 * Checking just with #ifdef might not be enough because this symbol
2258 * has been known to be an enum.
2261 * This symbol, if defined, indicates that the MSG_PROXY is supported.
2262 * Checking just with #ifdef might not be enough because this symbol
2263 * has been known to be an enum.
2266 * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
2267 * Checking just with #ifdef might not be enough because this symbol
2268 * has been known to be an enum.
2270 #define HAS_SOCKET /**/
2271 /*#define HAS_SOCKETPAIR /**/
2272 /*#define HAS_MSG_CTRUNC /**/
2273 /*#define HAS_MSG_DONTROUTE /**/
2274 /*#define HAS_MSG_OOB /**/
2275 /*#define HAS_MSG_PEEK /**/
2276 /*#define HAS_MSG_PROXY /**/
2277 /*#define HAS_SCM_RIGHTS /**/
2280 * This symbol, if defined, indicates that the socks5_init routine is
2281 * available to initialize SOCKS 5.
2283 /*#define HAS_SOCKS5_INIT /**/
2286 * This symbol, if defined, indicates that the sqrtl routine is
2287 * available to do long double square roots.
2289 /*#define HAS_SQRTL /**/
2292 * This symbol, if defined, indicates that the srand48_r routine
2293 * is available to srand48 re-entrantly.
2296 * This symbol encodes the prototype of srand48_r.
2298 /*#define HAS_SRAND48_R /**/
2299 #define SRAND48_R_PROTO 0 /**/
2302 * This symbol, if defined, indicates that the srandom_r routine
2303 * is available to srandom re-entrantly.
2306 * This symbol encodes the prototype of srandom_r.
2308 /*#define HAS_SRANDOM_R /**/
2309 #define SRANDOM_R_PROTO 0 /**/
2312 * This symbol is defined if this system has a stat structure declaring
2313 * st_blksize and st_blocks.
2315 #ifndef USE_STAT_BLOCKS
2316 /*#define USE_STAT_BLOCKS /**/
2319 /* HAS_STRUCT_STATFS_F_FLAGS:
2320 * This symbol, if defined, indicates that the struct statfs
2321 * does have the f_flags member containing the mount flags of
2322 * the filesystem containing the file.
2323 * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
2324 * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
2325 * have statfs() and struct statfs, they have ustat() and getmnt()
2326 * with struct ustat and struct fs_data.
2328 /*#define HAS_STRUCT_STATFS_F_FLAGS /**/
2330 /* HAS_STRUCT_STATFS:
2331 * This symbol, if defined, indicates that the struct statfs
2332 * to do statfs() is supported.
2334 /*#define HAS_STRUCT_STATFS /**/
2337 * This symbol, if defined, indicates that the fstatvfs routine is
2338 * available to stat filesystems by file descriptors.
2340 /*#define HAS_FSTATVFS /**/
2343 * This symbol is defined if the _ptr and _cnt fields (or similar)
2344 * of the stdio FILE structure can be used to access the stdio buffer
2345 * for a file handle. If this is defined, then the FILE_ptr(fp)
2346 * and FILE_cnt(fp) macros will also be defined and should be used
2347 * to access these fields.
2350 * This macro is used to access the _ptr field (or equivalent) of the
2351 * FILE structure pointed to by its argument. This macro will always be
2352 * defined if USE_STDIO_PTR is defined.
2354 /* STDIO_PTR_LVALUE:
2355 * This symbol is defined if the FILE_ptr macro can be used as an
2359 * This macro is used to access the _cnt field (or equivalent) of the
2360 * FILE structure pointed to by its argument. This macro will always be
2361 * defined if USE_STDIO_PTR is defined.
2363 /* STDIO_CNT_LVALUE:
2364 * This symbol is defined if the FILE_cnt macro can be used as an
2367 /* STDIO_PTR_LVAL_SETS_CNT:
2368 * This symbol is defined if using the FILE_ptr macro as an lvalue
2369 * to increase the pointer by n has the side effect of decreasing the
2370 * value of File_cnt(fp) by n.
2372 /* STDIO_PTR_LVAL_NOCHANGE_CNT:
2373 * This symbol is defined if using the FILE_ptr macro as an lvalue
2374 * to increase the pointer by n leaves File_cnt(fp) unchanged.
2376 #define USE_STDIO_PTR /**/
2377 #ifdef USE_STDIO_PTR
2378 #define FILE_ptr(fp) ((fp)->curp)
2379 #define STDIO_PTR_LVALUE /**/
2380 #define FILE_cnt(fp) ((fp)->level)
2381 #define STDIO_CNT_LVALUE /**/
2382 /*#define STDIO_PTR_LVAL_SETS_CNT /**/
2383 #define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
2387 * This symbol is defined if the _base field (or similar) of the
2388 * stdio FILE structure can be used to access the stdio buffer for
2389 * a file handle. If this is defined, then the FILE_base(fp) macro
2390 * will also be defined and should be used to access this field.
2391 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
2392 * to determine the number of bytes in the buffer. USE_STDIO_BASE
2393 * will never be defined unless USE_STDIO_PTR is.
2396 * This macro is used to access the _base field (or equivalent) of the
2397 * FILE structure pointed to by its argument. This macro will always be
2398 * defined if USE_STDIO_BASE is defined.
2401 * This macro is used to determine the number of bytes in the I/O
2402 * buffer pointed to by _base field (or equivalent) of the FILE
2403 * structure pointed to its argument. This macro will always be defined
2404 * if USE_STDIO_BASE is defined.
2406 #define USE_STDIO_BASE /**/
2407 #ifdef USE_STDIO_BASE
2408 #define FILE_base(fp) ((fp)->buffer)
2409 #define FILE_bufsiz(fp) ((fp)->level + (fp)->curp - (fp)->buffer)
2413 * This symbol, if defined, indicates that the strerror routine is
2414 * available to translate error numbers to strings. See the writeup
2415 * of Strerror() in this file before you try to define your own.
2418 * This symbol, if defined, indicates that the sys_errlist array is
2419 * available to translate error numbers to strings. The extern int
2420 * sys_nerr gives the size of that table.
2423 * This preprocessor symbol is defined as a macro if strerror() is
2424 * not available to translate error numbers to strings but sys_errlist[]
2427 #define HAS_STRERROR /**/
2428 #define HAS_SYS_ERRLIST /**/
2429 #define Strerror(e) strerror(e)
2432 * This symbol, if defined, indicates that the strerror_r routine
2433 * is available to strerror re-entrantly.
2435 /* STRERROR_R_PROTO:
2436 * This symbol encodes the prototype of strerror_r.
2438 /*#define HAS_STRERROR_R /**/
2439 #define STRERROR_R_PROTO 0 /**/
2442 * This symbol, if defined, indicates that the strtold routine is
2443 * available to convert strings to long doubles.
2445 /*#define HAS_STRTOLD /**/
2448 * This symbol, if defined, indicates that the strtoll routine is
2449 * available to convert strings to long longs.
2451 /*#define HAS_STRTOLL /**/
2454 * This symbol, if defined, indicates that the strtoq routine is
2455 * available to convert strings to long longs (quads).
2457 /*#define HAS_STRTOQ /**/
2460 * This symbol, if defined, indicates that the strtoul routine is
2461 * available to provide conversion of strings to unsigned long.
2463 #define HAS_STRTOUL /**/
2466 * This symbol, if defined, indicates that the strtoull routine is
2467 * available to convert strings to unsigned long longs.
2469 /*#define HAS_STRTOULL /**/
2472 * This symbol, if defined, indicates that the strtouq routine is
2473 * available to convert strings to unsigned long longs (quads).
2475 /*#define HAS_STRTOUQ /**/
2477 /* HAS_TELLDIR_PROTO:
2478 * This symbol, if defined, indicates that the system provides
2479 * a prototype for the telldir() function. Otherwise, it is up
2480 * to the program to supply one. A good guess is
2481 * extern long telldir(DIR*);
2483 #define HAS_TELLDIR_PROTO /**/
2486 * This symbol, if defined, indicates that the time() routine exists.
2489 * This symbol holds the type returned by time(). It can be long,
2490 * or time_t on BSD sites (in which case <sys/types.h> should be
2493 #define HAS_TIME /**/
2494 #define Time_t time_t /* Time type */
2497 * This symbol, if defined, indicates that the times() routine exists.
2498 * Note that this became obsolete on some systems (SUNOS), which now
2499 * use getrusage(). It may be necessary to include <sys/times.h>.
2501 #define HAS_TIMES /**/
2504 * This symbol, if defined, indicates that the tmpnam_r routine
2505 * is available to tmpnam re-entrantly.
2508 * This symbol encodes the prototype of tmpnam_r.
2510 /*#define HAS_TMPNAM_R /**/
2511 #define TMPNAM_R_PROTO 0 /**/
2514 * This symbol, if defined, indicates that the ualarm routine is
2515 * available to do alarms with microsecond granularity.
2517 /*#define HAS_UALARM /**/
2520 * This symbol, if defined, indicates that the union semun is
2521 * defined by including <sys/sem.h>. If not, the user code
2522 * probably needs to define it as:
2525 * struct semid_ds *buf;
2526 * unsigned short *array;
2529 /* USE_SEMCTL_SEMUN:
2530 * This symbol, if defined, indicates that union semun is
2531 * used for semctl IPC_STAT.
2533 /* USE_SEMCTL_SEMID_DS:
2534 * This symbol, if defined, indicates that struct semid_ds * is
2535 * used for semctl IPC_STAT.
2537 #define HAS_UNION_SEMUN /**/
2538 /*#define USE_SEMCTL_SEMUN /**/
2539 /*#define USE_SEMCTL_SEMID_DS /**/
2542 * This symbol, if defined, indicates that the unordered routine is
2543 * available to check whether two doubles are unordered
2544 * (effectively: whether either of them is NaN)
2546 /*#define HAS_UNORDERED /**/
2549 * This symbol, if defined, indicates that the ustat system call is
2550 * available to query file system statistics by dev_t.
2552 /*#define HAS_USTAT /**/
2555 * This symbol, if defined, indicates that vfork() exists.
2557 /*#define HAS_VFORK /**/
2560 * This symbol's value is either "void" or "int", corresponding to the
2561 * appropriate return type of a signal handler. Thus, you can declare
2562 * a signal handler using "Signal_t (*handler)()", and define the
2563 * handler using "Signal_t handler(sig)".
2565 #define Signal_t void /* Signal handler's return type */
2568 * This symbol, if defined, indicates that the vprintf routine is available
2569 * to printf with a pointer to an argument list. If unavailable, you
2570 * may need to write your own, probably in terms of _doprnt().
2572 /* USE_CHAR_VSPRINTF:
2573 * This symbol is defined if this system has vsprintf() returning type
2574 * (char*). The trend seems to be to declare it as "int vsprintf()". It
2575 * is up to the package author to declare vsprintf correctly based on the
2578 #define HAS_VPRINTF /**/
2579 /*#define USE_CHAR_VSPRINTF /**/
2582 * This symbol, if defined, indicates that the writev routine is
2583 * available to do scatter writes.
2585 /*#define HAS_WRITEV /**/
2587 /* USE_DYNAMIC_LOADING:
2588 * This symbol, if defined, indicates that dynamic loading of
2589 * some sort is available.
2591 #define USE_DYNAMIC_LOADING /**/
2594 * This symbol contains the size of a double, so that the C preprocessor
2595 * can make decisions based on it.
2597 #define DOUBLESIZE 8 /**/
2600 * This symbol, if defined, indicates that this system uses
2603 /*#define EBCDIC /**/
2606 * This symbol, if defined, tells that fflush(NULL) does flush
2607 * all pending stdio output.
2610 * This symbol, if defined, tells that to flush
2611 * all pending stdio output one must loop through all
2612 * the stdio file handles stored in an array and fflush them.
2613 * Note that if fflushNULL is defined, fflushall will not
2614 * even be probed for and will be left undefined.
2616 #define FFLUSH_NULL /**/
2617 /*#define FFLUSH_ALL /**/
2620 * This symbol holds the type used to declare file positions in libc.
2621 * It can be fpos_t, long, uint, etc... It may be necessary to include
2622 * <sys/types.h> to get any typedef'ed information.
2624 #define Fpos_t fpos_t /* File position type */
2627 * This symbol defines the format string used for printing a Gid_t.
2629 #define Gid_t_f "d" /**/
2632 * This symbol holds the signedess of a Gid_t.
2633 * 1 for unsigned, -1 for signed.
2635 #define Gid_t_sign -1 /* GID sign */
2638 * This symbol holds the size of a Gid_t in bytes.
2640 #define Gid_t_size 4 /* GID size */
2643 * This symbol holds the return type of getgid() and the type of
2644 * argument to setrgid() and related functions. Typically,
2645 * it is the type of group ids in the kernel. It can be int, ushort,
2646 * gid_t, etc... It may be necessary to include <sys/types.h> to get
2647 * any typedef'ed information.
2649 #define Gid_t gid_t /* Type for getgid(), etc... */
2652 * This symbol holds the type used for the second argument to
2653 * getgroups() and setgroups(). Usually, this is the same as
2654 * gidtype (gid_t) , but sometimes it isn't.
2655 * It can be int, ushort, gid_t, etc...
2656 * It may be necessary to include <sys/types.h> to get any
2657 * typedef'ed information. This is only required if you have
2658 * getgroups() or setgroups()..
2660 #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
2661 #define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
2665 * This symbol contains the type of the prefix structure element
2666 * in the <db.h> header file. In older versions of DB, it was
2667 * int, while in newer ones it is u_int32_t.
2670 * This symbol contains the type of the prefix structure element
2671 * in the <db.h> header file. In older versions of DB, it was
2672 * int, while in newer ones it is size_t.
2674 /* DB_VERSION_MAJOR_CFG:
2675 * This symbol, if defined, defines the major version number of
2676 * Berkeley DB found in the <db.h> header when Perl was configured.
2678 /* DB_VERSION_MINOR_CFG:
2679 * This symbol, if defined, defines the minor version number of
2680 * Berkeley DB found in the <db.h> header when Perl was configured.
2681 * For DB version 1 this is always 0.
2683 /* DB_VERSION_PATCH_CFG:
2684 * This symbol, if defined, defines the patch version number of
2685 * Berkeley DB found in the <db.h> header when Perl was configured.
2686 * For DB version 1 this is always 0.
2688 #define DB_Hash_t int /**/
2689 #define DB_Prefix_t int /**/
2690 #define DB_VERSION_MAJOR_CFG 0 /**/
2691 #define DB_VERSION_MINOR_CFG 0 /**/
2692 #define DB_VERSION_PATCH_CFG 0 /**/
2695 * This symbol, if defined, indicates that <fp_class.h> exists and
2696 * should be included.
2698 /*#define I_FP_CLASS /**/
2701 * This symbol, if defined, indicates to the C program that it should
2705 * This symbol, if defined, indicates to the C program that struct group
2706 * in <grp.h> contains gr_passwd.
2708 /*#define I_GRP /**/
2709 /*#define GRPASSWD /**/
2712 * This symbol, if defined, indicates that <ieeefp.h> exists and
2713 * should be included.
2715 /*#define I_IEEEFP /**/
2718 * This symbol, if defined, indicates to the C program that it should
2719 * include <inttypes.h>.
2721 /*#define I_INTTYPES /**/
2724 * This symbol, if defined, indicates that <libutil.h> exists and
2725 * should be included.
2727 /*#define I_LIBUTIL /**/
2730 * This symbol, if defined, indicates to the C program that it should
2731 * include <mach/cthreads.h>.
2733 /*#define I_MACH_CTHREADS /**/
2736 * This symbol, if defined, indicates that <mntent.h> exists and
2737 * should be included.
2739 /*#define I_MNTENT /**/
2742 * This symbol, if defined, indicates that <netdb.h> exists and
2743 * should be included.
2745 /*#define I_NETDB /**/
2748 * This symbol, if defined, indicates to the C program that it should
2749 * include <netinet/tcp.h>.
2751 /*#define I_NETINET_TCP /**/
2754 * This symbol, if defined, indicates that <poll.h> exists and
2755 * should be included.
2757 /*#define I_POLL /**/
2760 * This symbol, if defined, indicates that <prot.h> exists and
2761 * should be included.
2763 /*#define I_PROT /**/
2766 * This symbol, if defined, indicates to the C program that it should
2767 * include <pthread.h>.
2769 /*#define I_PTHREAD /**/
2772 * This symbol, if defined, indicates to the C program that it should
2776 * This symbol, if defined, indicates to the C program that struct passwd
2777 * contains pw_quota.
2780 * This symbol, if defined, indicates to the C program that struct passwd
2784 * This symbol, if defined, indicates to the C program that struct passwd
2785 * contains pw_change.
2788 * This symbol, if defined, indicates to the C program that struct passwd
2789 * contains pw_class.
2792 * This symbol, if defined, indicates to the C program that struct passwd
2793 * contains pw_expire.
2796 * This symbol, if defined, indicates to the C program that struct passwd
2797 * contains pw_comment.
2800 * This symbol, if defined, indicates to the C program that struct passwd
2801 * contains pw_gecos.
2804 * This symbol, if defined, indicates to the C program that struct passwd
2805 * contains pw_passwd.
2807 /*#define I_PWD /**/
2808 /*#define PWQUOTA /**/
2809 /*#define PWAGE /**/
2810 /*#define PWCHANGE /**/
2811 /*#define PWCLASS /**/
2812 /*#define PWEXPIRE /**/
2813 /*#define PWCOMMENT /**/
2814 /*#define PWGECOS /**/
2815 /*#define PWPASSWD /**/
2818 * This symbol, if defined, indicates that <shadow.h> exists and
2819 * should be included.
2821 /*#define I_SHADOW /**/
2824 * This symbol, if defined, indicates that <socks.h> exists and
2825 * should be included.
2827 /*#define I_SOCKS /**/
2830 * This symbol, if defined, indicates that <sunmath.h> exists and
2831 * should be included.
2833 /*#define I_SUNMATH /**/
2836 * This symbol, if defined, indicates that <syslog.h> exists and
2837 * should be included.
2839 /*#define I_SYSLOG /**/
2842 * This symbol, if defined, indicates that <sys/mode.h> exists and
2843 * should be included.
2845 /*#define I_SYSMODE /**/
2848 * This symbol, if defined, indicates that <sys/mount.h> exists and
2849 * should be included.
2851 /*#define I_SYS_MOUNT /**/
2854 * This symbol, if defined, indicates that <sys/statfs.h> exists.
2856 /*#define I_SYS_STATFS /**/
2859 * This symbol, if defined, indicates that <sys/statvfs.h> exists and
2860 * should be included.
2862 /*#define I_SYS_STATVFS /**/
2865 * This symbol, if defined, indicates that <sys/uio.h> exists and
2866 * should be included.
2868 /*#define I_SYSUIO /**/
2871 * This symbol, if defined, indicates that <sys/utsname.h> exists and
2872 * should be included.
2874 /*#define I_SYSUTSNAME /**/
2877 * This symbol, if defined, indicates that <sys/vfs.h> exists and
2878 * should be included.
2880 /*#define I_SYS_VFS /**/
2883 * This symbol, if defined, indicates to the C program that it should
2887 * This symbol, if defined, indicates to the C program that it should
2888 * include <sys/time.h>.
2890 /* I_SYS_TIME_KERNEL:
2891 * This symbol, if defined, indicates to the C program that it should
2892 * include <sys/time.h> with KERNEL defined.
2895 * This symbol, if defined, indicates to the C program that
2896 * the struct tm has a tm_zone field.
2899 /*#define I_SYS_TIME /**/
2900 /*#define I_SYS_TIME_KERNEL /**/
2901 /*#define HAS_TM_TM_ZONE /**/
2904 * This symbol, if defined, indicates that <ustat.h> exists and
2905 * should be included.
2907 /*#define I_USTAT /**/
2909 /* PERL_INC_VERSION_LIST:
2910 * This variable specifies the list of subdirectories in over
2911 * which perl.c:incpush() and lib/lib.pm will automatically
2912 * search when adding directories to @INC, in a format suitable
2913 * for a C initialization string. See the inc_version_list entry
2914 * in Porting/Glossary for more details.
2916 #define PERL_INC_VERSION_LIST 0 /**/
2918 /* INSTALL_USR_BIN_PERL:
2919 * This symbol, if defined, indicates that Perl is to be installed
2920 * also as /usr/bin/perl.
2922 /*#define INSTALL_USR_BIN_PERL /**/
2925 * This symbol, if defined, contains the string used by stdio to
2926 * format long doubles (format 'f') for output.
2929 * This symbol, if defined, contains the string used by stdio to
2930 * format long doubles (format 'g') for output.
2933 * This symbol, if defined, contains the string used by stdio to
2934 * format long doubles (format 'e') for output.
2937 * This symbol, if defined, contains the string used by stdio to
2938 * format long doubles (format 'f') for input.
2940 #define PERL_PRIfldbl "Lf" /**/
2941 #define PERL_PRIgldbl "Lg" /**/
2942 #define PERL_PRIeldbl "Le" /**/
2943 #define PERL_SCNfldbl "Lf" /**/
2946 * This symbol holds the type used to declare offsets in the kernel.
2947 * It can be int, long, off_t, etc... It may be necessary to include
2948 * <sys/types.h> to get any typedef'ed information.
2951 * This symbol holds the number of bytes used by the Off_t.
2954 * This symbol holds the number of bytes used by the Off_t.
2956 #define Off_t __int64 /* <offset> type */
2957 #define LSEEKSIZE 8 /* <offset> size */
2958 #define Off_t_size 8 /* <offset> size */
2961 * This variable contains the return type of free(). It is usually
2962 * void, but occasionally int.
2965 * This symbol is the type of pointer returned by malloc and realloc.
2967 #define Malloc_t void * /**/
2968 #define Free_t void /**/
2971 * This symbol, if defined, indicates that we're using our own malloc.
2973 /*#define MYMALLOC /**/
2976 * This symbol holds the type used to declare file modes
2977 * for systems calls. It is usually mode_t, but may be
2978 * int or unsigned short. It may be necessary to include <sys/types.h>
2979 * to get any typedef'ed information.
2981 #define Mode_t mode_t /* file mode parameter for system calls */
2984 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
2985 * non-blocking I/O for the file descriptor. Note that there is no way
2986 * back, i.e. you cannot turn it blocking again this way. If you wish to
2987 * alternatively switch between blocking and non-blocking, use the
2988 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
2991 * This symbol holds the errno error code set by read() when no data was
2992 * present on the non-blocking file descriptor.
2995 * This symbol holds the return code from read() when no data is present
2996 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
2997 * not defined, then you can't distinguish between no data and EOF by
2998 * issuing a read(). You'll have to find another way to tell for sure!
3001 * This symbol, if defined, indicates to the C program that a read() on
3002 * a non-blocking file descriptor will return 0 on EOF, and not the value
3003 * held in RD_NODATA (-1 usually, in that case!).
3005 #define VAL_O_NONBLOCK O_NONBLOCK
3006 #define VAL_EAGAIN EAGAIN
3007 #define RD_NODATA -1
3008 #define EOF_NONBLOCK
3011 * This symbol, if defined, indicates that the system stores
3012 * the variable argument list datatype, va_list, in a format
3013 * that cannot be copied by simple assignment, so that some
3014 * other means must be used when copying is required.
3015 * As such systems vary in their provision (or non-provision)
3016 * of copying mechanisms, handy.h defines a platform-
3017 * independent macro, Perl_va_copy(src, dst), to do the job.
3019 /*#define NEED_VA_COPY /**/
3022 * This symbol holds the type used for the 1st argument
3023 * to gethostbyaddr().
3026 * This symbol holds the type used for the 2nd argument
3027 * to gethostbyaddr().
3030 * This symbol holds the type used for the argument to
3034 * This symbol holds the type used for the 1st argument to
3037 #define Netdb_host_t char * /**/
3038 #define Netdb_hlen_t int /**/
3039 #define Netdb_name_t char * /**/
3040 #define Netdb_net_t long /**/
3042 /* PERL_OTHERLIBDIRS:
3043 * This variable contains a colon-separated set of paths for the perl
3044 * binary to search for additional library files or modules.
3045 * These directories will be tacked to the end of @INC.
3046 * Perl will automatically search below each path for version-
3047 * and architecture-specific directories. See PERL_INC_VERSION_LIST
3050 /*#define PERL_OTHERLIBDIRS "" /**/
3053 * This symbol defines the C type used for Perl's IV.
3056 * This symbol defines the C type used for Perl's UV.
3059 * This symbol defines the C type used for Perl's I8.
3062 * This symbol defines the C type used for Perl's U8.
3065 * This symbol defines the C type used for Perl's I16.
3068 * This symbol defines the C type used for Perl's U16.
3071 * This symbol defines the C type used for Perl's I32.
3074 * This symbol defines the C type used for Perl's U32.
3077 * This symbol defines the C type used for Perl's I64.
3080 * This symbol defines the C type used for Perl's U64.
3083 * This symbol defines the C type used for Perl's NV.
3086 * This symbol contains the sizeof(IV).
3089 * This symbol contains the sizeof(UV).
3092 * This symbol contains the sizeof(I8).
3095 * This symbol contains the sizeof(U8).
3098 * This symbol contains the sizeof(I16).
3101 * This symbol contains the sizeof(U16).
3104 * This symbol contains the sizeof(I32).
3107 * This symbol contains the sizeof(U32).
3110 * This symbol contains the sizeof(I64).
3113 * This symbol contains the sizeof(U64).
3116 * This symbol contains the sizeof(NV).
3119 * This symbol, if defined, indicates that a variable of type NVTYPE
3120 * can preserve all the bits of a variable of type UVTYPE.
3122 /* NV_PRESERVES_UV_BITS:
3123 * This symbol contains the number of bits a variable of type NVTYPE
3124 * can preserve of a variable of type UVTYPE.
3126 #define IVTYPE long /**/
3127 #define UVTYPE unsigned long /**/
3128 #define I8TYPE char /**/
3129 #define U8TYPE unsigned char /**/
3130 #define I16TYPE short /**/
3131 #define U16TYPE unsigned short /**/
3132 #define I32TYPE long /**/
3133 #define U32TYPE unsigned long /**/
3135 #define I64TYPE __int64 /**/
3136 #define U64TYPE unsigned __int64 /**/
3138 #define NVTYPE double /**/
3139 #define IVSIZE 4 /**/
3140 #define UVSIZE 4 /**/
3141 #define I8SIZE 1 /**/
3142 #define U8SIZE 1 /**/
3143 #define I16SIZE 2 /**/
3144 #define U16SIZE 2 /**/
3145 #define I32SIZE 4 /**/
3146 #define U32SIZE 4 /**/
3148 #define I64SIZE 8 /**/
3149 #define U64SIZE 8 /**/
3151 #define NVSIZE 8 /**/
3152 #define NV_PRESERVES_UV
3153 #define NV_PRESERVES_UV_BITS 32
3156 * This symbol defines the format string used for printing a Perl IV
3157 * as a signed decimal integer.
3160 * This symbol defines the format string used for printing a Perl UV
3161 * as an unsigned decimal integer.
3164 * This symbol defines the format string used for printing a Perl UV
3165 * as an unsigned octal integer.
3168 * This symbol defines the format string used for printing a Perl UV
3169 * as an unsigned hexadecimal integer in lowercase abcdef.
3172 * This symbol defines the format string used for printing a Perl UV
3173 * as an unsigned hexadecimal integer in uppercase ABCDEF.
3176 * This symbol defines the format string used for printing a Perl NV
3177 * using %e-ish floating point format.
3180 * This symbol defines the format string used for printing a Perl NV
3181 * using %f-ish floating point format.
3184 * This symbol defines the format string used for printing a Perl NV
3185 * using %g-ish floating point format.
3187 #define IVdf "ld" /**/
3188 #define UVuf "lu" /**/
3189 #define UVof "lo" /**/
3190 #define UVxf "lx" /**/
3191 #define UVXf "lX" /**/
3192 #define NVef "e" /**/
3193 #define NVff "f" /**/
3194 #define NVgf "g" /**/
3197 * This symbol holds the type used to declare process ids in the kernel.
3198 * It can be int, uint, pid_t, etc... It may be necessary to include
3199 * <sys/types.h> to get any typedef'ed information.
3201 #define Pid_t int /* PID type */
3204 * This symbol contains the name of the private library for this package.
3205 * The library is private in the sense that it needn't be in anyone's
3206 * execution path, but it should be accessible by the world. The program
3207 * should be prepared to do ~ expansion.
3210 * This symbol contains the ~name expanded version of PRIVLIB, to be used
3211 * in programs that are not prepared to deal with ~ expansion at run-time.
3213 #define PRIVLIB "c:\\perl\\5.8.0\\lib" /**/
3214 #define PRIVLIB_EXP (win32_get_privlib("5.8.0")) /**/
3217 * This symbol contains the size of a pointer, so that the C preprocessor
3218 * can make decisions based on it. It will be sizeof(void *) if
3219 * the compiler supports (void *); otherwise it will be
3222 #define PTRSIZE 4 /**/
3225 * This macro is to be used to generate uniformly distributed
3226 * random numbers over the range [0., 1.[. You may have to supply
3227 * an 'extern double drand48();' in your program since SunOS 4.1.3
3228 * doesn't provide you with anything relevant in its headers.
3229 * See HAS_DRAND48_PROTO.
3232 * This symbol defines the type of the argument of the
3233 * random seed function.
3236 * This symbol defines the macro to be used in seeding the
3237 * random number generator (see Drand01).
3240 * This symbol indicates how many bits are produced by the
3241 * function used to generate normalized random numbers.
3242 * Values include 15, 16, 31, and 48.
3244 #define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/
3245 #define Rand_seed_t unsigned /**/
3246 #define seedDrand01(x) srand((Rand_seed_t)x) /**/
3247 #define RANDBITS 15 /**/
3250 * This symbol holds the minimum number of bits operated by select.
3251 * That is, if you do select(n, ...), how many bits at least will be
3252 * cleared in the masks if some activity is detected. Usually this
3253 * is either n or 32*ceil(n/32), especially many little-endians do
3254 * the latter. This is only useful if you have select(), naturally.
3256 #define SELECT_MIN_BITS 32 /**/
3259 * This symbol holds the type used for the 2nd, 3rd, and 4th
3260 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
3261 * is defined, and 'int *' otherwise. This is only useful if you
3262 * have select(), of course.
3264 #define Select_fd_set_t Perl_fd_set * /**/
3267 * This symbol contains a list of signal names in order of
3268 * signal number. This is intended
3269 * to be used as a static array initialization, like this:
3270 * char *sig_name[] = { SIG_NAME };
3271 * The signals in the list are separated with commas, and each signal
3272 * is surrounded by double quotes. There is no leading SIG in the signal
3273 * name, i.e. SIGQUIT is known as "QUIT".
3274 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
3275 * etc., where nn is the actual signal number (e.g. NUM37).
3276 * The signal number for sig_name[i] is stored in sig_num[i].
3277 * The last element is 0 to terminate the list with a NULL. This
3278 * corresponds to the 0 at the end of the sig_num list.
3281 * This symbol contains a list of signal numbers, in the same order as the
3282 * SIG_NAME list. It is suitable for static array initialization, as in:
3283 * int sig_num[] = { SIG_NUM };
3284 * The signals in the list are separated with commas, and the indices
3285 * within that list and the SIG_NAME list match, so it's easy to compute
3286 * the signal name from a number or vice versa at the price of a small
3287 * dynamic linear lookup.
3288 * Duplicates are allowed, but are moved to the end of the list.
3289 * The signal number corresponding to sig_name[i] is sig_number[i].
3290 * if (i < NSIG) then sig_number[i] == i.
3291 * The last element is 0, corresponding to the 0 at the end of
3292 * the sig_name list.
3295 * This variable contains the number of elements of the sig_name
3296 * and sig_num arrays, excluding the final NULL entry.
3298 #define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "USR1", "USR2", "CHLD", "NUM19", "USR3", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/
3299 #define SIG_NUM 0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 18, 0 /**/
3300 #define SIG_SIZE 27 /**/
3303 * This symbol contains the name of the private library for this package.
3304 * The library is private in the sense that it needn't be in anyone's
3305 * execution path, but it should be accessible by the world. The program
3306 * should be prepared to do ~ expansion.
3307 * The standard distribution will put nothing in this directory.
3308 * After perl has been installed, users may install their own local
3309 * architecture-dependent modules in this directory with
3310 * MakeMaker Makefile.PL
3311 * or equivalent. See INSTALL for details.
3314 * This symbol contains the ~name expanded version of SITEARCH, to be used
3315 * in programs that are not prepared to deal with ~ expansion at run-time.
3317 #define SITEARCH "c:\\perl\\site\\5.8.0\\lib\\MSWin32-x86-multi-thread" /**/
3318 /*#define SITEARCH_EXP "" /**/
3321 * This symbol contains the name of the private library for this package.
3322 * The library is private in the sense that it needn't be in anyone's
3323 * execution path, but it should be accessible by the world. The program
3324 * should be prepared to do ~ expansion.
3325 * The standard distribution will put nothing in this directory.
3326 * After perl has been installed, users may install their own local
3327 * architecture-independent modules in this directory with
3328 * MakeMaker Makefile.PL
3329 * or equivalent. See INSTALL for details.
3332 * This symbol contains the ~name expanded version of SITELIB, to be used
3333 * in programs that are not prepared to deal with ~ expansion at run-time.
3336 * This define is SITELIB_EXP with any trailing version-specific component
3337 * removed. The elements in inc_version_list (inc_version_list.U) can
3338 * be tacked onto this variable to generate a list of directories to search.
3340 #define SITELIB "c:\\perl\\site\\5.8.0\\lib" /**/
3341 #define SITELIB_EXP (win32_get_sitelib("5.8.0")) /**/
3342 #define SITELIB_STEM "" /**/
3345 * This symbol holds the size of a Size_t in bytes.
3347 #define Size_t_size 4 /**/
3350 * This symbol holds the type used to declare length parameters
3351 * for string functions. It is usually size_t, but may be
3352 * unsigned long, int, etc. It may be necessary to include
3353 * <sys/types.h> to get any typedef'ed information.
3355 #define Size_t size_t /* length paramater for string functions */
3358 * This symbol holds the type used for the size argument of
3359 * various socket calls (just the base type, not the pointer-to).
3361 #define Sock_size_t int /**/
3364 * This symbol holds the type used by functions that return
3365 * a count of bytes or an error condition. It must be a signed type.
3366 * It is usually ssize_t, but may be long or int, etc.
3367 * It may be necessary to include <sys/types.h> or <unistd.h>
3368 * to get any typedef'ed information.
3369 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
3371 #define SSize_t int /* signed count of bytes */
3374 * This variable contains the string to put in front of a perl
3375 * script to make sure (one hopes) that it runs with perl and not
3378 #define STARTPERL "#!perl" /**/
3381 * This symbol is defined to be the type of char used in stdio.h.
3382 * It has the values "unsigned char" or "char".
3384 #define STDCHAR unsigned char /**/
3386 /* HAS_STDIO_STREAM_ARRAY:
3387 * This symbol, if defined, tells that there is an array
3388 * holding the stdio streams.
3390 /* STDIO_STREAM_ARRAY:
3391 * This symbol tells the name of the array holding the stdio streams.
3392 * Usual values include _iob, __iob, and __sF.
3394 /*#define HAS_STDIO_STREAM_ARRAY /**/
3395 #define STDIO_STREAM_ARRAY
3398 * This symbol defines the format string used for printing a Uid_t.
3400 #define Uid_t_f "d" /**/
3403 * This symbol holds the signedess of a Uid_t.
3404 * 1 for unsigned, -1 for signed.
3406 #define Uid_t_sign -1 /* UID sign */
3409 * This symbol holds the size of a Uid_t in bytes.
3411 #define Uid_t_size 4 /* UID size */
3414 * This symbol holds the type used to declare user ids in the kernel.
3415 * It can be int, ushort, uid_t, etc... It may be necessary to include
3416 * <sys/types.h> to get any typedef'ed information.
3418 #define Uid_t uid_t /* UID type */
3421 * This symbol, if defined, indicates that 64-bit integers should
3422 * be used when available. If not defined, the native integers
3423 * will be employed (be they 32 or 64 bits). The minimal possible
3424 * 64-bitness is used, just enough to get 64-bit integers into Perl.
3425 * This may mean using for example "long longs", while your memory
3426 * may still be limited to 2 gigabytes.
3429 * This symbol, if defined, indicates that 64-bit integers should
3430 * be used when available. If not defined, the native integers
3431 * will be used (be they 32 or 64 bits). The maximal possible
3432 * 64-bitness is employed: LP64 or ILP64, meaning that you will
3433 * be able to use more than 2 gigabytes of memory. This mode is
3434 * even more binary incompatible than USE_64_BIT_INT. You may not
3435 * be able to run the resulting executable in a 32-bit CPU at all or
3436 * you may need at least to reboot your OS to 64-bit mode.
3438 #ifndef USE_64_BIT_INT
3439 /*#define USE_64_BIT_INT /**/
3442 #ifndef USE_64_BIT_ALL
3443 /*#define USE_64_BIT_ALL /**/
3447 * This symbol, if defined, indicates that large file support
3448 * should be used when available.
3450 #ifndef USE_LARGE_FILES
3451 #define USE_LARGE_FILES /**/
3455 * This symbol, if defined, indicates that long doubles should
3456 * be used when available.
3458 #ifndef USE_LONG_DOUBLE
3459 /*#define USE_LONG_DOUBLE /**/
3463 * This symbol, if defined, indicates that 64-bit interfaces and
3464 * long doubles should be used when available.
3466 #ifndef USE_MORE_BITS
3467 /*#define USE_MORE_BITS /**/
3471 * This symbol, if defined, indicates that Perl should
3472 * be built to use multiplicity.
3474 #ifndef MULTIPLICITY
3475 #define MULTIPLICITY /**/
3479 * This symbol, if defined, indicates that the PerlIO abstraction should
3480 * be used throughout. If not defined, stdio should be
3481 * used in a fully backward compatible manner.
3484 #define USE_PERLIO /**/
3488 * This symbol, if defined, indicates that Perl should
3489 * be built to use socks.
3492 /*#define USE_SOCKS /**/
3496 * This symbol, if defined, indicates that Perl should be built to
3497 * use the interpreter-based threading implementation.
3499 /* OLD_PTHREADS_API:
3500 * This symbol, if defined, indicates that Perl should
3501 * be built to use the old draft POSIX threads API.
3503 /* USE_REENTRANT_API:
3504 * This symbol, if defined, indicates that Perl should
3505 * try to use the various _r versions of library functions.
3506 * This is extremely experimental.
3508 #define USE_ITHREADS /**/
3509 /*#define OLD_PTHREADS_API /**/
3510 /*#define USE_REENTRANT_API /**/
3513 * If defined, this symbol contains the name of a private library.
3514 * The library is private in the sense that it needn't be in anyone's
3515 * execution path, but it should be accessible by the world.
3516 * It may have a ~ on the front.
3517 * The standard distribution will put nothing in this directory.
3518 * Vendors who distribute perl may wish to place their own
3519 * architecture-dependent modules and extensions in this directory with
3520 * MakeMaker Makefile.PL INSTALLDIRS=vendor
3521 * or equivalent. See INSTALL for details.
3523 /* PERL_VENDORARCH_EXP:
3524 * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
3525 * in programs that are not prepared to deal with ~ expansion at run-time.
3527 /*#define PERL_VENDORARCH "" /**/
3528 /*#define PERL_VENDORARCH_EXP "" /**/
3530 /* PERL_VENDORLIB_EXP:
3531 * This symbol contains the ~name expanded version of VENDORLIB, to be used
3532 * in programs that are not prepared to deal with ~ expansion at run-time.
3534 /* PERL_VENDORLIB_STEM:
3535 * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
3536 * removed. The elements in inc_version_list (inc_version_list.U) can
3537 * be tacked onto this variable to generate a list of directories to search.
3539 /*#define PERL_VENDORLIB_EXP "" /**/
3540 /*#define PERL_VENDORLIB_STEM "" /**/
3543 * This symbol indicates how much support of the void type is given by this
3544 * compiler. What various bits mean:
3546 * 1 = supports declaration of void
3547 * 2 = supports arrays of pointers to functions returning void
3548 * 4 = supports comparisons between pointers to void functions and
3549 * addresses of void functions
3550 * 8 = suports declaration of generic void pointers
3552 * The package designer should define VOIDUSED to indicate the requirements
3553 * of the package. This can be done either by #defining VOIDUSED before
3554 * including config.h, or by defining defvoidused in Myinit.U. If the
3555 * latter approach is taken, only those flags will be tested. If the
3556 * level of void support necessary is not present, defines void to int.
3561 #define VOIDFLAGS 15
3562 #if (VOIDFLAGS & VOIDUSED) != VOIDUSED
3563 #define void int /* is void to be avoided? */
3564 #define M_VOID /* Xenix strikes again */
3567 /* PERL_XS_APIVERSION:
3568 * This variable contains the version of the oldest perl binary
3569 * compatible with the present perl. perl.c:incpush() and
3570 * lib/lib.pm will automatically search in c:\\perl\\site\\5.8.0\\lib\\MSWin32-x86-multi-thread for older
3571 * directories across major versions back to xs_apiversion.
3572 * This is only useful if you have a perl library directory tree
3573 * structured like the default one.
3574 * See INSTALL for how this works.
3575 * The versioned site_perl directory was introduced in 5.005,
3576 * so that is the lowest possible value.
3577 * Since this can depend on compile time options
3578 * it is set by Configure. Other non-default sources
3579 * of potential incompatibility, such as multiplicity, threads,
3580 * debugging, 64bits, sfio, etc., are not checked for currently,
3581 * though in principle we could go snooping around in old
3584 /* PERL_PM_APIVERSION:
3585 * This variable contains the version of the oldest perl
3586 * compatible with the present perl. (That is, pure perl modules
3587 * written for pm_apiversion will still work for the current
3588 * version). perl.c:incpush() and lib/lib.pm will automatically
3589 * search in c:\\perl\\site\\5.8.0\\lib for older directories across major versions
3590 * back to pm_apiversion. This is only useful if you have a perl
3591 * library directory tree structured like the default one. The
3592 * versioned site_perl library was introduced in 5.005, so that's
3593 * the default setting for this variable. It's hard to imagine
3594 * it changing before Perl6. It is included here for symmetry
3595 * with xs_apiveprsion -- the searching algorithms will
3596 * (presumably) be similar.
3597 * See the INSTALL file for how this works.
3599 #define PERL_XS_APIVERSION "5.8.0"
3600 #define PERL_PM_APIVERSION "5.005"
3603 * This symbol, if defined, indicates that the crypt routine is available
3604 * to encrypt passwords and the like.
3606 /*#define HAS_CRYPT /**/
3608 /* SETUID_SCRIPTS_ARE_SECURE_NOW:
3609 * This symbol, if defined, indicates that the bug that prevents
3610 * setuid scripts from being secure is not present in this kernel.
3613 * This symbol, if defined, indicates that the C program should
3614 * check the script that it is executing for setuid/setgid bits, and
3615 * attempt to emulate setuid/setgid on systems that have disabled
3616 * setuid #! scripts because the kernel can't do it securely.
3617 * It is up to the package designer to make sure that this emulation
3618 * is done securely. Among other things, it should do an fstat on
3619 * the script it just opened to make sure it really is a setuid/setgid
3620 * script, it should make sure the arguments passed correspond exactly
3621 * to the argument on the #! line, and it should not trust any
3622 * subprocesses to which it must pass the filename rather than the
3623 * file descriptor of the script to be executed.
3625 /*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
3626 /*#define DOSUID /**/
3629 * This symbol holds the return type of the shmat() system call.
3630 * Usually set to 'void *' or 'char *'.
3632 /* HAS_SHMAT_PROTOTYPE:
3633 * This symbol, if defined, indicates that the sys/shm.h includes
3634 * a prototype for shmat(). Otherwise, it is up to the program to
3635 * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
3636 * but not always right so it should be emitted by the program only
3637 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
3639 #define Shmat_t void * /**/
3640 /*#define HAS_SHMAT_PROTOTYPE /**/
3643 * This symbol, if defined, indicates that <ndbm.h> exists and should
3646 /*#define I_NDBM /**/
3649 * This symbol, if defined, indicates that <stdarg.h> exists and should
3653 * This symbol, if defined, indicates to the C program that it should
3654 * include <varargs.h>.
3656 #define I_STDARG /**/
3657 /*#define I_VARARGS /**/
3660 * If defined, this macro indicates that the C compiler can handle
3661 * function prototypes.
3664 * This macro is used to declare function parameters for folks who want
3665 * to make declarations with prototypes using a different style than
3666 * the above macros. Use double parentheses. For example:
3668 * int main _((int argc, char *argv[]));
3670 #define CAN_PROTOTYPE /**/
3671 #ifdef CAN_PROTOTYPE
3672 #define _(args) args
3678 * This symbol contains the full pathname to the shell used on this
3679 * on this system to execute Bourne shell scripts. Usually, this will be
3680 * /bin/sh, though it's possible that some systems will have /bin/ksh,
3681 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
3684 #define SH_PATH "cmd /x /c" /**/
3686 /* USE_CROSS_COMPILE:
3687 * This symbol, if defined, indicates that Perl is being cross-compiled.
3690 * This symbol, if defined, indicates the target architecture
3691 * Perl has been cross-compiled to. Undefined if not a cross-compile.
3693 #ifndef USE_CROSS_COMPILE
3694 /*#define USE_CROSS_COMPILE /**/
3695 #define PERL_TARGETARCH "" /**/
3698 /* HAS_DBMINIT_PROTO:
3699 * This symbol, if defined, indicates that the system provides
3700 * a prototype for the dbminit() function. Otherwise, it is up
3701 * to the program to supply one. A good guess is
3702 * extern int dbminit(char *);
3704 /*#define HAS_DBMINIT_PROTO /**/
3707 * This manifest constant lets the C program know that dirfd
3710 /*#define HAS_DIRFD /**/
3713 * This symbol, if defined, indicates that the system provides
3714 * a prototype for the flock() function. Otherwise, it is up
3715 * to the program to supply one. A good guess is
3716 * extern int flock(int, int);
3718 #define HAS_FLOCK_PROTO /**/
3721 * This symbol, if defined, indicates that the fpclassl routine is
3722 * available to classify long doubles. Available for example in IRIX.
3723 * The returned values are defined in <ieeefp.h> and are:
3725 * FP_SNAN signaling NaN
3727 * FP_NINF negative infinity
3728 * FP_PINF positive infinity
3729 * FP_NDENORM negative denormalized non-zero
3730 * FP_PDENORM positive denormalized non-zero
3731 * FP_NZERO negative zero
3732 * FP_PZERO positive zero
3733 * FP_NNORM negative normalized non-zero
3734 * FP_PNORM positive normalized non-zero
3736 /*#define HAS_FPCLASSL /**/
3739 * This symbol, if defined, indicates that the nl_langinfo routine is
3740 * available to return local data. You will also need <langinfo.h>
3741 * and therefore I_LANGINFO.
3743 /*#define HAS_NL_LANGINFO /**/
3746 * This symbol is defined if PROCSELFEXE_PATH is a symlink
3747 * to the absolute pathname of the executing program.
3749 /* PROCSELFEXE_PATH:
3750 * If HAS_PROCSELFEXE is defined this symbol is the filename
3751 * of the symbolic link pointing to the absolute pathname of
3752 * the executing program.
3754 /*#define HAS_PROCSELFEXE /**/
3755 #if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
3756 #define PROCSELFEXE_PATH /**/
3760 * This symbol, if defined, indicates that the sigprocmask
3761 * system call is available to examine or change the signal mask
3762 * of the calling process.
3764 /*#define HAS_SIGPROCMASK /**/
3767 * This symbol, if defined, indicates that the sockatmark routine is
3768 * available to test whether a socket is at the out-of-band mark.
3770 /*#define HAS_SOCKATMARK /**/
3772 /* HAS_SOCKATMARK_PROTO:
3773 * This symbol, if defined, indicates that the system provides
3774 * a prototype for the sockatmark() function. Otherwise, it is up
3775 * to the program to supply one. A good guess is
3776 * extern int sockatmark(int);
3778 /*#define HAS_SOCKATMARK_PROTO /**/
3780 /* HAS_SETRESGID_PROTO:
3781 * This symbol, if defined, indicates that the system provides
3782 * a prototype for the setresgid() function. Otherwise, it is up
3783 * to the program to supply one. Good guesses are
3784 * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
3786 /*#define HAS_SETRESGID_PROTO /**/
3788 /* HAS_SETRESUID_PROTO:
3789 * This symbol, if defined, indicates that the system provides
3790 * a prototype for the setresuid() function. Otherwise, it is up
3791 * to the program to supply one. Good guesses are
3792 * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
3794 /*#define HAS_SETRESUID_PROTO /**/
3797 * This symbol, if defined, indicates that the strftime routine is
3798 * available to do time formatting.
3800 #define HAS_STRFTIME /**/
3802 /* HAS_SYSCALL_PROTO:
3803 * This symbol, if defined, indicates that the system provides
3804 * a prototype for the syscall() function. Otherwise, it is up
3805 * to the program to supply one. Good guesses are
3806 * extern int syscall(int, ...);
3807 * extern int syscall(long, ...);
3809 /*#define HAS_SYSCALL_PROTO /**/
3811 /* U32_ALIGNMENT_REQUIRED:
3812 * This symbol, if defined, indicates that you must access
3813 * character data through U32-aligned pointers.
3815 #ifndef U32_ALIGNMENT_REQUIRED
3816 #define U32_ALIGNMENT_REQUIRED /**/
3819 /* HAS_USLEEP_PROTO:
3820 * This symbol, if defined, indicates that the system provides
3821 * a prototype for the usleep() function. Otherwise, it is up
3822 * to the program to supply one. A good guess is
3823 * extern int usleep(useconds_t);
3825 /*#define HAS_USLEEP_PROTO /**/
3828 * This symbol, if defined, indicates that <crypt.h> exists and
3829 * should be included.
3831 /*#define I_CRYPT /**/
3834 * This symbol, if defined, indicates that <fp.h> exists and
3835 * should be included.
3840 * This symbol, if defined, indicates that <langinfo.h> exists and
3841 * should be included.
3843 /*#define I_LANGINFO /**/
3846 * This symbol, if defined, indicates that the ctermid_r routine
3847 * is available to ctermid re-entrantly.
3850 * This symbol encodes the prototype of ctermid_r.
3852 /*#define HAS_CTERMID_R /**/
3853 #define CTERMID_R_PROTO 0 /**/
3855 /* HAS_ENDHOSTENT_R:
3856 * This symbol, if defined, indicates that the endhostent_r routine
3857 * is available to endhostent re-entrantly.
3859 /* ENDHOSTENT_R_PROTO:
3860 * This symbol encodes the prototype of endhostent_r.
3862 /*#define HAS_ENDHOSTENT_R /**/
3863 #define ENDHOSTENT_R_PROTO 0 /**/
3866 * This symbol, if defined, indicates that the endnetent_r routine
3867 * is available to endnetent re-entrantly.
3869 /* ENDNETENT_R_PROTO:
3870 * This symbol encodes the prototype of endnetent_r.
3872 /*#define HAS_ENDNETENT_R /**/
3873 #define ENDNETENT_R_PROTO 0 /**/
3875 /* HAS_ENDPROTOENT_R:
3876 * This symbol, if defined, indicates that the endprotoent_r routine
3877 * is available to endprotoent re-entrantly.
3879 /* ENDPROTOENT_R_PROTO:
3880 * This symbol encodes the prototype of endprotoent_r.
3882 /*#define HAS_ENDPROTOENT_R /**/
3883 #define ENDPROTOENT_R_PROTO 0 /**/
3885 /* HAS_ENDSERVENT_R:
3886 * This symbol, if defined, indicates that the endservent_r routine
3887 * is available to endservent re-entrantly.
3889 /* ENDSERVENT_R_PROTO:
3890 * This symbol encodes the prototype of endservent_r.
3892 /*#define HAS_ENDSERVENT_R /**/
3893 #define ENDSERVENT_R_PROTO 0 /**/
3895 /* HAS_GETHOSTBYADDR_R:
3896 * This symbol, if defined, indicates that the gethostbyaddr_r routine
3897 * is available to gethostbyaddr re-entrantly.
3899 /* GETHOSTBYADDR_R_PROTO:
3900 * This symbol encodes the prototype of gethostbyaddr_r.
3902 /*#define HAS_GETHOSTBYADDR_R /**/
3903 #define GETHOSTBYADDR_R_PROTO 0 /**/
3905 /* HAS_GETHOSTBYNAME_R:
3906 * This symbol, if defined, indicates that the gethostbyname_r routine
3907 * is available to gethostbyname re-entrantly.
3909 /* GETHOSTBYNAME_R_PROTO:
3910 * This symbol encodes the prototype of gethostbyname_r.
3912 /*#define HAS_GETHOSTBYNAME_R /**/
3913 #define GETHOSTBYNAME_R_PROTO 0 /**/
3915 /* HAS_GETHOSTENT_R:
3916 * This symbol, if defined, indicates that the gethostent_r routine
3917 * is available to gethostent re-entrantly.
3919 /* GETHOSTENT_R_PROTO:
3920 * This symbol encodes the prototype of gethostent_r.
3922 /*#define HAS_GETHOSTENT_R /**/
3923 #define GETHOSTENT_R_PROTO 0 /**/
3925 /* HAS_GETNETBYADDR_R:
3926 * This symbol, if defined, indicates that the getnetbyaddr_r routine
3927 * is available to getnetbyaddr re-entrantly.
3929 /* GETNETBYADDR_R_PROTO:
3930 * This symbol encodes the prototype of getnetbyaddr_r.
3932 /*#define HAS_GETNETBYADDR_R /**/
3933 #define GETNETBYADDR_R_PROTO 0 /**/
3935 /* HAS_GETNETBYNAME_R:
3936 * This symbol, if defined, indicates that the getnetbyname_r routine
3937 * is available to getnetbyname re-entrantly.
3939 /* GETNETBYNAME_R_PROTO:
3940 * This symbol encodes the prototype of getnetbyname_r.
3942 /*#define HAS_GETNETBYNAME_R /**/
3943 #define GETNETBYNAME_R_PROTO 0 /**/
3946 * This symbol, if defined, indicates that the getnetent_r routine
3947 * is available to getnetent re-entrantly.
3949 /* GETNETENT_R_PROTO:
3950 * This symbol encodes the prototype of getnetent_r.
3952 /*#define HAS_GETNETENT_R /**/
3953 #define GETNETENT_R_PROTO 0 /**/
3955 /* HAS_GETPROTOBYNAME_R:
3956 * This symbol, if defined, indicates that the getprotobyname_r routine
3957 * is available to getprotobyname re-entrantly.
3959 /* GETPROTOBYNAME_R_PROTO:
3960 * This symbol encodes the prototype of getprotobyname_r.
3962 /*#define HAS_GETPROTOBYNAME_R /**/
3963 #define GETPROTOBYNAME_R_PROTO 0 /**/
3965 /* HAS_GETPROTOBYNUMBER_R:
3966 * This symbol, if defined, indicates that the getprotobynumber_r routine
3967 * is available to getprotobynumber re-entrantly.
3969 /* GETPROTOBYNUMBER_R_PROTO:
3970 * This symbol encodes the prototype of getprotobynumber_r.
3972 /*#define HAS_GETPROTOBYNUMBER_R /**/
3973 #define GETPROTOBYNUMBER_R_PROTO 0 /**/
3975 /* HAS_GETPROTOENT_R:
3976 * This symbol, if defined, indicates that the getprotoent_r routine
3977 * is available to getprotoent re-entrantly.
3979 /* GETPROTOENT_R_PROTO:
3980 * This symbol encodes the prototype of getprotoent_r.
3982 /*#define HAS_GETPROTOENT_R /**/
3983 #define GETPROTOENT_R_PROTO 0 /**/
3985 /* HAS_GETSERVBYNAME_R:
3986 * This symbol, if defined, indicates that the getservbyname_r routine
3987 * is available to getservbyname re-entrantly.
3989 /* GETSERVBYNAME_R_PROTO:
3990 * This symbol encodes the prototype of getservbyname_r.
3992 /*#define HAS_GETSERVBYNAME_R /**/
3993 #define GETSERVBYNAME_R_PROTO 0 /**/
3995 /* HAS_GETSERVBYPORT_R:
3996 * This symbol, if defined, indicates that the getservbyport_r routine
3997 * is available to getservbyport re-entrantly.
3999 /* GETSERVBYPORT_R_PROTO:
4000 * This symbol encodes the prototype of getservbyport_r.
4002 /*#define HAS_GETSERVBYPORT_R /**/
4003 #define GETSERVBYPORT_R_PROTO 0 /**/
4005 /* HAS_GETSERVENT_R:
4006 * This symbol, if defined, indicates that the getservent_r routine
4007 * is available to getservent re-entrantly.
4009 /* GETSERVENT_R_PROTO:
4010 * This symbol encodes the prototype of getservent_r.
4012 /*#define HAS_GETSERVENT_R /**/
4013 #define GETSERVENT_R_PROTO 0 /**/
4015 /* HAS_PTHREAD_ATFORK:
4016 * This symbol, if defined, indicates that the pthread_atfork routine
4017 * is available setup fork handlers.
4019 /*#define HAS_PTHREAD_ATFORK /**/
4022 * This symbol, if defined, indicates that the readdir64_r routine
4023 * is available to readdir64 re-entrantly.
4025 /* READDIR64_R_PROTO:
4026 * This symbol encodes the prototype of readdir64_r.
4028 /*#define HAS_READDIR64_R /**/
4029 #define READDIR64_R_PROTO 0 /**/
4031 /* HAS_SETHOSTENT_R:
4032 * This symbol, if defined, indicates that the sethostent_r routine
4033 * is available to sethostent re-entrantly.
4035 /* SETHOSTENT_R_PROTO:
4036 * This symbol encodes the prototype of sethostent_r.
4038 /*#define HAS_SETHOSTENT_R /**/
4039 #define SETHOSTENT_R_PROTO 0 /**/
4042 * This symbol, if defined, indicates that the setlocale_r routine
4043 * is available to setlocale re-entrantly.
4045 /* SETLOCALE_R_PROTO:
4046 * This symbol encodes the prototype of setlocale_r.
4048 /*#define HAS_SETLOCALE_R /**/
4049 #define SETLOCALE_R_PROTO 0 /**/
4052 * This symbol, if defined, indicates that the setnetent_r routine
4053 * is available to setnetent re-entrantly.
4055 /* SETNETENT_R_PROTO:
4056 * This symbol encodes the prototype of setnetent_r.
4058 /*#define HAS_SETNETENT_R /**/
4059 #define SETNETENT_R_PROTO 0 /**/
4061 /* HAS_SETPROTOENT_R:
4062 * This symbol, if defined, indicates that the setprotoent_r routine
4063 * is available to setprotoent re-entrantly.
4065 /* SETPROTOENT_R_PROTO:
4066 * This symbol encodes the prototype of setprotoent_r.
4068 /*#define HAS_SETPROTOENT_R /**/
4069 #define SETPROTOENT_R_PROTO 0 /**/
4071 /* HAS_SETSERVENT_R:
4072 * This symbol, if defined, indicates that the setservent_r routine
4073 * is available to setservent re-entrantly.
4075 /* SETSERVENT_R_PROTO:
4076 * This symbol encodes the prototype of setservent_r.
4078 /*#define HAS_SETSERVENT_R /**/
4079 #define SETSERVENT_R_PROTO 0 /**/
4082 * This symbol, if defined, indicates that the ttyname_r routine
4083 * is available to ttyname re-entrantly.
4086 * This symbol encodes the prototype of ttyname_r.
4088 /*#define HAS_TTYNAME_R /**/
4089 #define TTYNAME_R_PROTO 0 /**/