2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual C++ 98)
99 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
101 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
103 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
105 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # uncomment next line if you want debug version of perl (big,slow)
110 # If not enabled, we automatically try to use maximum optimization
111 # with all compilers that are known to have a working optimizer.
116 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
117 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
118 # This currently requires VC 5.0 with Service Pack 3 or later.
119 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
120 # and follow the directions in the package to install.
122 # Not recommended if you have VC 6.x and you're not running Windows 9x.
124 #USE_PERLCRT = define
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # if you want to have the crypt() builtin function implemented, leave this or
137 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
138 # version of des_fcrypt().
143 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
144 # library, uncomment this, and make sure the library exists (see README.win32)
145 # Specify the full pathname of the library.
147 #CRYPT_LIB = fcrypt.lib
150 # set this if you wish to use perl's malloc
151 # WARNING: Turning this on/off WILL break binary compatibility with extensions
152 # you may have compiled with/without it. Be prepared to recompile all
153 # extensions if you change the default. Currently, this cannot be enabled
154 # if you ask for USE_IMP_SYS above.
156 #PERL_MALLOC = define
159 # set this to enable debugging mstats
160 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
161 # be enabled without PERL_MALLOC as well.
163 #DEBUG_MSTATS = define
166 # set this to additionally provide a statically linked perl-static.exe.
167 # Note that dynamic loading will not work with this perl, so you must
168 # include required modules statically using STATIC_EXT variable below.
169 # A static library perl59s.lib will also be created.
170 # Ordinary perl.exe is not affected by this option.
172 #BUILD_STATIC = define
176 # set the install locations of the compiler include/libraries
177 # Running VCVARS32.BAT is *required* when using Visual C.
178 # Some versions of Visual C don't define MSVCDIR in the environment,
179 # so you may have to set CCHOME explicitly (spaces in the path name should
184 CCINCDIR = $(CCHOME)\include
185 CCLIBDIR = $(CCHOME)\lib
188 # Additional compiler flags can be specified here.
190 BUILDOPT = $(BUILDOPTEXTRA)
193 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
194 # internal hash function unless the PERL_HASH_SEED environment variable is set.
195 # Alternatively, adding -DNO_HASH_SEED will completely disable the
196 # randomization feature.
197 # The latter is required to maintain binary compatibility with Perl 5.8.0.
199 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
200 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
203 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
204 # for old symbols by default, at the expense of extreme pollution. You most
205 # probably just want to build modules that won't compile with
206 # perl Makefile.PL POLLUTE=1
207 # instead of enabling this. Please report such modules to the respective
210 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
213 # This should normally be disabled. Enabling it will disable the File::Glob
214 # implementation of CORE::glob.
216 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
219 # This should normally be disabled. Enabling it causes perl to read scripts
220 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
222 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
225 # specify semicolon-separated list of extra directories that modules will
226 # look for libraries (spaces in path names need not be quoted)
231 # set this to your email address (perl will guess a value from
232 # from your loginname and your hostname, which may not be right)
237 ## Build configuration ends.
240 ##################### CHANGE THESE ONLY IF YOU MUST #####################
242 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
246 CRYPT_FLAG = -DHAVE_DES_FCRYPT
249 !IF "$(USE_IMP_SYS)" == "define"
254 !IF "$(PERL_MALLOC)" == ""
259 !IF "$(DEBUG_MSTATS)" == ""
263 !IF "$(DEBUG_MSTATS)" == "define"
264 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
267 !IF "$(USE_SITECUST)" == ""
271 !IF "$(USE_MULTI)" == ""
275 !IF "$(USE_ITHREADS)" == ""
279 !IF "$(USE_IMP_SYS)" == ""
283 !IF "$(USE_PERLIO)" == ""
287 !IF "$(USE_LARGE_FILES)" == ""
288 USE_LARGE_FILES = undef
291 !IF "$(USE_PERLCRT)" == ""
295 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
299 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
303 !IF "$(USE_SITECUST)" == "define"
304 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
307 !IF "$(USE_MULTI)" != "undef"
308 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
311 !IF "$(USE_IMP_SYS)" != "undef"
312 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
315 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
316 PROCESSOR_ARCHITECTURE = x86
320 # When we are running from a 32bit cmd.exe on AMD64 then
321 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
323 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
324 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
327 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
335 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
336 !IF "$(ARCHITECTURE)" == "AMD64"
339 !IF "$(ARCHITECTURE)" == "IA64"
343 !IF "$(USE_MULTI)" == "define"
344 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
346 !IF "$(USE_PERLIO)" == "define"
347 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
349 ARCHNAME = MSWin32-$(ARCHITECTURE)
353 !IF "$(USE_PERLIO)" == "define"
354 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
357 !IF "$(USE_ITHREADS)" == "define"
358 ARCHNAME = $(ARCHNAME)-thread
361 # Visual C++ 98, .NET 2003 and 2005 specific.
362 # VC++ 6.x, 7.x and 8.x can load DLL's on demand. Makes the test suite run in
363 # about 10% less time. (The free version of 7.x can't do this, but the free
364 # version of 8.x can.)
365 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
366 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
367 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
370 # Visual C++ 2005 (VC++ 8.x) creates manifest files for EXEs and DLLs. These
371 # either need copying everywhere with the binaries, or else need embedding in
372 # them otherwise MSVCR80.dll won't be found. Embed them for simplicity, and
373 # delete them afterwards so that they don't get installed too.
374 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
375 EMBED_EXE_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
377 EMBED_DLL_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
381 ARCHDIR = ..\lib\$(ARCHNAME)
382 COREDIR = ..\lib\CORE
383 AUTODIR = ..\lib\auto
387 EXTUTILSDIR = $(LIBDIR)\ExtUtils
391 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
392 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
393 INST_LIB = $(INST_TOP)$(INST_VER)\lib
394 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
395 INST_COREDIR = $(INST_ARCHLIB)\CORE
396 INST_HTML = $(INST_TOP)$(INST_VER)\html
399 # Programs to compile, build .lib files and link
404 LIB32 = $(LINK32) -lib
411 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
412 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
413 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
414 LOCDEFS = -DPERLDLL -DPERL_CORE
418 !IF "$(USE_PERLCRT)" != "define"
424 !IF "$(CFG)" == "Debug"
425 ! IF "$(CCTYPE)" == "MSVC20"
426 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
428 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
432 OPTIMIZE = -MD -Zi -DNDEBUG
433 # we enable debug symbols in release builds also
434 LINK_DBG = -debug -opt:ref,icf
435 # you may want to enable this if you want COFF symbols in the executables
436 # in addition to the PDB symbols. The default Dr. Watson that ships with
437 # Windows can use the the former but not latter. The free WinDbg can be
438 # installed to get better stack traces from just the PDB symbols, so we
439 # avoid the bloat of COFF symbols by default.
440 #LINK_DBG = $(LINK_DBG) -debugtype:both
441 ! IF "$(WIN64)" == "define"
442 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
443 OPTIMIZE = $(OPTIMIZE) -Ox -GL
444 LINK_DBG = $(LINK_DBG) -ltcg
446 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
447 OPTIMIZE = $(OPTIMIZE) -O1
448 #OPTIMIZE = $(OPTIMIZE) -O2
452 !IF "$(WIN64)" == "define"
453 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
454 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
457 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
458 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
459 # do not require the fix.
460 !IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
461 ! IF "$(USE_PERLCRT)" != "define"
462 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
466 LIBBASEFILES = $(CRYPT_LIB) \
467 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
468 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
469 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
470 version.lib odbc32.lib odbccp32.lib
472 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
473 # include the buffer overrun verification code used by the /GS switch.
474 # Since the code links against libraries that are compiled with /GS, this
475 # "security cookie verification" must be included via bufferoverlow.lib.
476 !IF "$(WIN64)" == "define"
477 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
480 # we add LIBC here, since we may be using PerlCRT.dll
481 LIBFILES = $(LIBBASEFILES) $(LIBC)
483 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
484 EXTRACFLAGS = -nologo -GF -W3
485 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
486 $(PCHFLAGS) $(OPTIMIZE)
487 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
488 -libpath:"$(INST_COREDIR)" \
489 -machine:$(PROCESSOR_ARCHITECTURE)
494 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
496 #################### do not edit below this line #######################
497 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
505 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
508 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
514 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
515 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
524 # makedef.pl must be updated if this changes, and this should normally
525 # only change when there is an incompatible revision of the public API.
526 PERLIMPLIB = ..\perl59.lib
527 PERLSTATICLIB = ..\perl59s.lib
528 PERLDLL = ..\perl59.dll
530 MINIPERL = ..\miniperl.exe
532 PERLEXE = ..\perl.exe
533 WPERLEXE = ..\wperl.exe
534 PERLEXESTATIC = ..\perl-static.exe
535 GLOBEXE = ..\perlglob.exe
536 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
537 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
539 !IF "$(BUILD_STATIC)" == "define"
545 # Unicode data files generated by mktables
546 FIRSTUNIFILE = ..\lib\unicore\Canonical.pl
547 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
548 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
549 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
550 ..\lib\unicore\PVA.pl
552 # Directories of Unicode data files generated by mktables
553 UNIDATADIR1 = ..\lib\unicore\To
554 UNIDATADIR2 = ..\lib\unicore\lib
556 PERLEXE_ICO = .\perlexe.ico
557 PERLEXE_RES = .\perlexe.res
560 # Nominate a target which causes extensions to be re-built
561 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
562 # on and really only the interface - i.e. the .def file used to export symbols
564 PERLDEP = perldll.def
566 PL2BAT = bin\pl2bat.pl
567 GLOBBAT = bin\perlglob.bat
583 ..\utils\config_data \
612 !IF "$(WIN64)" == "define"
613 CFGSH_TMPL = config.vc64
614 CFGH_TMPL = config_H.vc64
616 CFGSH_TMPL = config.vc
617 CFGH_TMPL = config_H.vc
620 XCOPY = xcopy /f /r /i /d /y
621 RCOPY = xcopy /f /r /i /e /d /y
628 # filenames given to xsubpp must have forward slashes (since it puts
629 # full pathnames in #line strings)
630 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
670 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
672 !IF "$(PERL_MALLOC)" == "define"
673 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
676 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
683 # We need this for miniperl build unless we override canned
684 # config.h #define building mini\*
685 #!IF "$(USE_PERLIO)" == "define"
686 WIN32_SRC = $(WIN32_SRC) .\win32io.c
689 !IF "$(CRYPT_SRC)" != ""
690 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
693 DLL_SRC = $(DYNALOADER).c
740 .\include\sys\socket.h \
743 CORE_H = $(CORE_NOCFG_H) .\config.h
745 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
746 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
747 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
748 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
749 $(MINIDIR)\miniperlmain$(o) \
750 $(MINIDIR)\perlio$(o)
751 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
752 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
753 DLL_OBJ = $(DLL_SRC:.c=.obj)
754 X2P_OBJ = $(X2P_SRC:.c=.obj)
756 PERLDLL_OBJ = $(CORE_OBJ)
757 PERLEXE_OBJ = perlmain$(o)
758 PERLEXEST_OBJ = perlmainst$(o)
760 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
762 !IF "$(USE_SETARGV)" != ""
763 SETARGV_OBJ = setargv$(o)
766 # specify static extensions here
767 #STATIC_EXT = Cwd Compress/Raw/Zlib
770 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
771 SOCKET = $(EXTDIR)\Socket\Socket
772 FCNTL = $(EXTDIR)\Fcntl\Fcntl
773 OPCODE = $(EXTDIR)\Opcode\Opcode
774 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
776 POSIX = $(EXTDIR)\POSIX\POSIX
777 ATTRS = $(EXTDIR)\attrs\attrs
778 THREAD = $(EXTDIR)\Thread\Thread
781 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
782 ERRNO = $(EXTDIR)\Errno\Errno
783 PEEK = $(EXTDIR)\Devel\Peek\Peek
784 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
785 DPROF = $(EXTDIR)\Devel\DProf\DProf
786 GLOB = $(EXTDIR)\File\Glob\Glob
787 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
788 STORABLE = $(EXTDIR)\Storable\Storable
789 FILTER = $(EXTDIR)\Filter\Util\Call\Call
790 ENCODE = $(EXTDIR)\Encode\Encode
791 MD5 = $(EXTDIR)\Digest\MD5\MD5
792 SHA = $(EXTDIR)\Digest\SHA\SHA
793 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
794 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
795 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
796 CWD = $(EXTDIR)\Cwd\Cwd
797 LISTUTIL = $(EXTDIR)\List\Util\Util
798 HASHUTIL = $(EXTDIR)\Hash\Util\Util
799 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
800 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
801 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
802 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
803 MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
804 COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
805 WIN32_DIR = ext\Win32
806 WIN32APIFILE = ext\Win32API\File\File
808 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
809 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
810 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
811 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
812 IO_DLL = $(AUTODIR)\IO\IO.dll
813 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
814 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
815 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
816 B_DLL = $(AUTODIR)\B\B.dll
817 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
818 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
819 RE_DLL = $(AUTODIR)\re\re.dll
820 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
821 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
822 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
823 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
824 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
825 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
826 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
827 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
828 SHA_DLL = $(AUTODIR)\Digest\SHA\SHA.dll
829 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
830 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
831 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
832 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
833 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
834 HASHUTIL_DLL = $(AUTODIR)\HASH\Util\Util.dll
835 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
836 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
837 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
838 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
839 MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
840 COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
841 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
842 WIN32APIFILE_DLL = $(AUTODIR)\Win32API\File\File.dll
875 $(UNICODENORMALIZE).c \
876 $(MATHBIGINTFASTCALC).c \
903 $(PERLIOSCALAR_DLL) \
912 $(UNICODENORMALIZE_DLL) \
913 $(MATHBIGINTFASTCALC_DLL) \
914 $(COMPRESSZLIB_DLL) \
919 "INST_DRV=$(INST_DRV)" \
920 "INST_TOP=$(INST_TOP)" \
921 "INST_VER=$(INST_VER)" \
922 "INST_ARCH=$(INST_ARCH)" \
923 "archname=$(ARCHNAME)" \
926 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
927 "cf_email=$(EMAIL)" \
928 "d_crypt=$(D_CRYPT)" \
929 "d_mymalloc=$(PERL_MALLOC)" \
931 "incpath=$(CCINCDIR:"=\")" \
932 "libperl=$(PERLIMPLIB:..\=)" \
933 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
935 "make=$(MAKE_BARE)" \
936 "static_ext=$(STATIC_EXT)" \
937 "usethreads=$(USE_ITHREADS)" \
938 "useithreads=$(USE_ITHREADS)" \
939 "usemultiplicity=$(USE_MULTI)" \
940 "useperlio=$(USE_PERLIO)" \
941 "uselargefiles=$(USE_LARGE_FILES)" \
942 "usesitecustomize=$(USE_SITECUST)" \
943 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
944 "optimize=$(OPTIMIZE:"=\")"
950 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
951 $(X2P) MakePPPort Extensions $(PERLSTATIC)
952 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
954 ..\regnodes.h : ..\regcomp.sym
959 regnodes : ..\regnodes.h
961 reonly : regnodes .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) \
962 $(PERLEXE) $(X2P) Extensions_reonly
963 @echo Perl and 're' are up to date.
965 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
967 static: $(PERLEXESTATIC)
969 #------------------------------------------------------------
971 $(GLOBEXE) : perlglob$(o)
972 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
973 perlglob$(o) setargv$(o)
976 perlglob$(o) : perlglob.c
978 config.w32 : $(CFGSH_TMPL)
979 copy $(CFGSH_TMPL) config.w32
981 .\config.h : $(CFGH_TMPL)
983 copy $(CFGH_TMPL) config.h
985 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
986 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
988 # this target is for when changes to the main config.sh happen
989 # edit config.{b,v,g}c and make this target once for each supported
990 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
992 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
994 -del /f perl.exe perl*.dll
999 -perl config_h.PL "INST_VER=$(INST_VER)"
1000 rename config.h $(CFGH_TMPL)
1002 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1006 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1007 $(XCOPY) ..\*.h $(COREDIR)\*.*
1008 $(XCOPY) *.h $(COREDIR)\*.*
1009 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1010 $(RCOPY) include $(COREDIR)\*.*
1011 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
1012 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
1014 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
1015 $(LINK32) -subsystem:console -out:$@ @<<
1016 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
1021 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1023 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1024 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
1026 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1027 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
1029 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1030 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1031 !IF "$(USE_IMP_SYS)" == "define"
1032 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1033 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1036 # 1. we don't want to rebuild miniperl.exe when config.h changes
1037 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1038 $(MINI_OBJ) : $(CORE_NOCFG_H)
1040 $(WIN32_OBJ) : $(CORE_H)
1041 $(CORE_OBJ) : $(CORE_H)
1042 $(DLL_OBJ) : $(CORE_H)
1043 $(X2P_OBJ) : $(CORE_H)
1045 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1046 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1047 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
1048 CCTYPE=$(CCTYPE) > perldll.def
1050 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1051 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
1052 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
1055 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1057 $(PERLSTATICLIB): Extensions_static
1058 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
1061 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1063 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1064 $(MINIPERL) makeico.pl > $@
1066 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1068 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1070 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1073 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1074 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1076 ..\x2p\hash$(o) : ..\x2p\hash.c
1077 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1079 ..\x2p\str$(o) : ..\x2p\str.c
1080 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1082 ..\x2p\util$(o) : ..\x2p\util.c
1083 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1085 ..\x2p\walk$(o) : ..\x2p\walk.c
1086 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1088 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1089 $(MINIPERL) ..\x2p\find2perl.PL
1090 $(MINIPERL) ..\x2p\s2p.PL
1091 $(LINK32) -subsystem:console -out:$@ @<<
1092 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1096 perlmain.c : runperl.c
1097 copy runperl.c perlmain.c
1099 perlmain$(o) : perlmain.c
1100 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1102 perlmainst.c : runperl.c
1103 copy runperl.c perlmainst.c
1105 perlmainst$(o) : perlmainst.c
1106 $(CC) $(CFLAGS_O) -DPERLDLL $(OBJOUT_FLAG)$@ -c perlmainst.c
1108 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1109 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1110 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1112 copy $(PERLEXE) $(WPERLEXE)
1113 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1114 copy splittree.pl ..
1115 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1117 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1118 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1119 @Extensions_static $(PERLSTATICLIB) \
1120 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1123 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1124 if not exist $(AUTODIR) mkdir $(AUTODIR)
1126 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1127 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1129 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1130 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1132 $(XSUBPP) dl_win32.xs > $(*B).c
1135 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1136 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1138 MakePPPort: $(MINIPERL) $(CONFIGPM)
1139 $(MINIPERL) -I..\lib ..\mkppport
1142 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1144 #-------------------------------------------------------------------------------
1145 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1146 $(XCOPY) ..\*.h $(COREDIR)\*.*
1147 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1148 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1150 Extensions_reonly: buildext.pl $(PERLDEP) $(CONFIGPM)
1151 $(XCOPY) ..\*.h $(COREDIR)\*.*
1152 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1153 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1155 Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
1156 $(XCOPY) ..\*.h $(COREDIR)\*.*
1157 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1158 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1159 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1162 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1163 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1165 Extensions_realclean:
1166 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1167 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1169 #-------------------------------------------------------------------------------
1172 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1173 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1174 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1176 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1177 # so please check that script before making structural changes here
1179 utils: $(PERLEXE) $(X2P)
1181 $(MAKE) PERL=$(MINIPERL)
1183 copy ..\vms\perlvms.pod .\perlvms.pod
1184 copy ..\README.aix ..\pod\perlaix.pod
1185 copy ..\README.amiga ..\pod\perlamiga.pod
1186 copy ..\README.apollo ..\pod\perlapollo.pod
1187 copy ..\README.beos ..\pod\perlbeos.pod
1188 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1189 copy ..\README.ce ..\pod\perlce.pod
1190 copy ..\README.cn ..\pod\perlcn.pod
1191 copy ..\README.cygwin ..\pod\perlcygwin.pod
1192 copy ..\README.dgux ..\pod\perldgux.pod
1193 copy ..\README.dos ..\pod\perldos.pod
1194 copy ..\README.epoc ..\pod\perlepoc.pod
1195 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1196 copy ..\README.hpux ..\pod\perlhpux.pod
1197 copy ..\README.hurd ..\pod\perlhurd.pod
1198 copy ..\README.irix ..\pod\perlirix.pod
1199 copy ..\README.jp ..\pod\perljp.pod
1200 copy ..\README.ko ..\pod\perlko.pod
1201 copy ..\README.linux ..\pod\perllinux.pod
1202 copy ..\README.machten ..\pod\perlmachten.pod
1203 copy ..\README.macos ..\pod\perlmacos.pod
1204 copy ..\README.macosx ..\pod\perlmacosx.pod
1205 copy ..\README.mint ..\pod\perlmint.pod
1206 copy ..\README.mpeix ..\pod\perlmpeix.pod
1207 copy ..\README.netware ..\pod\perlnetware.pod
1208 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1209 copy ..\README.os2 ..\pod\perlos2.pod
1210 copy ..\README.os390 ..\pod\perlos390.pod
1211 copy ..\README.os400 ..\pod\perlos400.pod
1212 copy ..\README.plan9 ..\pod\perlplan9.pod
1213 copy ..\README.qnx ..\pod\perlqnx.pod
1214 copy ..\README.riscos ..\pod\perlriscos.pod
1215 copy ..\README.solaris ..\pod\perlsolaris.pod
1216 copy ..\README.symbian ..\pod\perlsymbian.pod
1217 copy ..\README.tru64 ..\pod\perltru64.pod
1218 copy ..\README.tw ..\pod\perltw.pod
1219 copy ..\README.uts ..\pod\perluts.pod
1220 copy ..\README.vmesa ..\pod\perlvmesa.pod
1221 copy ..\README.vms ..\pod\perlvms.pod
1222 copy ..\README.vos ..\pod\perlvos.pod
1223 copy ..\README.win32 ..\pod\perlwin32.pod
1224 copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
1225 $(MAKE) -f ..\win32\pod.mak converters
1227 $(PERLEXE) lib_pm.PL
1229 $(PERLEXE) $(PL2BAT) $(UTILS)
1231 # Note that the pod cleanup in this next section is parsed (and regenerated
1232 # by pod/buildtoc so please check that script before making changes here
1234 distclean: realclean
1235 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1236 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1237 $(PERLEXESTATIC) $(PERLSTATICLIB)
1239 -del /f $(EXTENSION_DLL)
1240 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1241 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1242 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1243 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1244 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1245 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1246 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1247 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1248 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1249 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1250 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1251 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1252 -del /f $(LIBDIR)\ByteLoader.pm
1253 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1254 -del /f $(LIBDIR)\Devel\PPPort.pm
1255 -del /f $(LIBDIR)\File\Glob.pm
1256 -del /f $(LIBDIR)\Storable.pm
1257 -del /f $(LIBDIR)\Digest\MD5.pm
1258 -del /f $(LIBDIR)\Digest\SHA.pm
1259 -del /f $(LIBDIR)\PerlIO\encoding.pm
1260 -del /f $(LIBDIR)\PerlIO\scalar.pm
1261 -del /f $(LIBDIR)\PerlIO\via.pm
1262 -del /f $(LIBDIR)\Sys\Hostname.pm
1263 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1264 -del /f $(LIBDIR)\threads\shared.pm
1265 -del /f $(LIBDIR)\Time\HiRes.pm
1266 -del /f $(LIBDIR)\Unicode\Normalize.pm
1267 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1268 -del /f $(LIBDIR)\Win32.pm
1269 -del /f $(LIBDIR)\Win32API\File.pm
1270 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1271 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1272 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1273 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1274 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1275 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1276 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1277 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1278 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1279 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1280 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1281 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1282 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1283 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1284 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1285 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1286 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1287 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1288 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1289 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1290 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1291 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1292 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1293 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1294 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1295 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1296 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1297 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1299 pod2html pod2latex pod2man pod2text pod2usage \
1300 podchecker podselect
1301 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1302 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1303 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1304 -cd ..\x2p && del /f find2perl s2p psed *.bat
1305 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1310 -del /f $(PERLEXE_ICO) perl.base
1311 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1312 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1313 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1314 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1315 -if exist pod2htmd.tmp del pod2htmd.tmp
1316 -if exist pod2htmi.tmp del pod2htmi.tmp
1317 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1319 install : all installbare installhtml
1322 $(PERLEXE) ..\installperl
1323 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1324 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1325 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1326 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1327 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1328 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1331 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1333 inst_lib : $(CONFIGPM)
1334 copy splittree.pl ..
1335 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1336 $(RCOPY) ..\lib $(INST_LIB)\*.*
1338 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1339 cd ..\lib\unicore && \
1340 ..\$(MINIPERL) -I.. mktables -check $@ $(FIRSTUNIFILE)
1342 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1343 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1344 if exist ..\t\perl.exe del /f ..\t\perl.exe
1345 rename ..\t\miniperl.exe perl.exe
1346 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1349 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1351 test-prep : all utils
1352 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1353 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1354 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1358 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1361 test-reonly : reonly utils
1362 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1363 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1364 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1366 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst $(EXTRA)
1374 test-notty : test-prep
1375 set PERL_SKIP_TTY_TEST=1
1377 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1381 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1382 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1383 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1385 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1389 -@$(DEL) miniperlmain$(o)
1390 -@$(DEL) $(MINIPERL)
1391 -@$(DEL) perlglob$(o)
1392 -@$(DEL) perlmain$(o)
1393 -@$(DEL) perlmainst$(o)
1398 -@$(DEL) $(WPERLEXE)
1399 -@$(DEL) $(PERLEXESTATIC)
1400 -@$(DEL) $(PERLSTATICLIB)
1402 -@$(DEL) $(CORE_OBJ)
1403 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1404 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1405 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1406 -@$(DEL) $(UNIDATAFILES)
1407 -@$(DEL) $(WIN32_OBJ)
1410 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1411 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1412 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1415 -@$(DEL) Extensions_static
1417 clean : Extensions_clean _clean
1419 realclean : Extensions_realclean MakePPPort_clean _clean
1421 # Handy way to run perlbug -ok without having to install and run the
1422 # installed perlbug. We don't re-run the tests here - we trust the user.
1423 # Please *don't* use this unless all tests pass.
1424 # If you want to report test failures, use "nmake nok" instead.
1426 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1429 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1432 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1435 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok