2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools **experimental**
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # uncomment to enable multiple interpreters. This is need for fork()
50 # emulation and for thread support.
55 # Beginnings of interpreter cloning/threads; now reasonably complete.
56 # This should be enabled to get the fork() emulation. This needs
62 # uncomment to enable the implicit "host" layer for all system calls
63 # made by perl. This needs USE_MULTI above. This is also needed to
69 # Comment out next assign to disable perl's I/O subsystem and use compiler's
70 # stdio for IO - depending on your compiler vendor and run time library you may
71 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
72 # You will also be unable to take full advantage of perl5.8's support for multiple
73 # encodings and may see lower IO performance. You have been warned.
77 # Comment this out if you don't want to enable large file support for
78 # some reason. Should normally only be changed to maintain compatibility
79 # with an older release of perl.
80 USE_LARGE_FILES = define
83 # uncomment one of the following lines if you are using either
84 # Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
90 # uncomment next line if you want debug version of perl (big,slow)
91 # If not enabled, we automatically try to use maximum optimization
92 # with all compilers that are known to have a working optimizer.
97 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
98 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
99 # This currently requires VC 5.0 with Service Pack 3 or later.
100 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
101 # and follow the directions in the package to install.
103 # Not recommended if you have VC 6.x and you're not running Windows 9x.
105 #USE_PERLCRT = define
108 # uncomment to enable linking with setargv.obj under the Visual C
109 # compiler. Setting this options enables perl to expand wildcards in
110 # arguments, but it may be harder to use alternate methods like
111 # File::DosGlob that are more powerful. This option is supported only with
114 #USE_SETARGV = define
117 # if you want to have the crypt() builtin function implemented, leave this or
118 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
119 # version of des_fcrypt().
124 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
125 # library, uncomment this, and make sure the library exists (see README.win32)
126 # Specify the full pathname of the library.
128 #CRYPT_LIB = fcrypt.lib
131 # set this if you wish to use perl's malloc
132 # WARNING: Turning this on/off WILL break binary compatibility with extensions
133 # you may have compiled with/without it. Be prepared to recompile all
134 # extensions if you change the default. Currently, this cannot be enabled
135 # if you ask for USE_IMP_SYS above.
137 #PERL_MALLOC = define
140 # set this to enable debugging mstats
141 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
142 # be enabled without PERL_MALLOC as well.
144 #DEBUG_MSTATS = define
148 # set the install locations of the compiler include/libraries
149 # Running VCVARS32.BAT is *required* when using Visual C.
150 # Some versions of Visual C don't define MSVCDIR in the environment,
151 # so you may have to set CCHOME explicitly (spaces in the path name should
156 CCINCDIR = $(CCHOME)\include
157 CCLIBDIR = $(CCHOME)\lib
160 # Additional compiler flags can be specified here.
164 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
165 # for old symbols by default, at the expense of extreme pollution. You most
166 # probably just want to build modules that won't compile with
167 # perl Makefile.PL POLLUTE=1
168 # instead of enabling this. Please report such modules to the respective
171 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
174 # This should normally be disabled. Enabling it will disable the File::Glob
175 # implementation of CORE::glob.
177 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
180 # This should normally be disabled. Enabling it causes perl to read scripts
181 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
182 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
185 # specify semicolon-separated list of extra directories that modules will
186 # look for libraries (spaces in path names need not be quoted)
191 # set this to your email address (perl will guess a value from
192 # from your loginname and your hostname, which may not be right)
197 ## Build configuration ends.
200 ##################### CHANGE THESE ONLY IF YOU MUST #####################
202 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
206 CRYPT_FLAG = -DHAVE_DES_FCRYPT
209 !IF "$(PERL_MALLOC)" == ""
214 !IF "$(DEBUG_MSTATS)" == ""
218 !IF "$(DEBUG_MSTATS)" == "define"
219 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
222 !IF "$(USE_IMP_SYS)" == "define"
226 !IF "$(USE_MULTI)" == ""
230 !IF "$(USE_ITHREADS)" == ""
234 !IF "$(USE_IMP_SYS)" == ""
238 !IF "$(USE_PERLIO)" == ""
242 !IF "$(USE_LARGE_FILES)" == ""
243 USE_LARGE_FILES = undef
246 !IF "$(USE_PERLCRT)" == ""
250 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
254 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
258 !IF "$(USE_MULTI)" != "undef"
259 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
262 !IF "$(USE_IMP_SYS)" != "undef"
263 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
266 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
267 PROCESSOR_ARCHITECTURE = x86
271 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
272 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
275 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
283 !IF "$(USE_MULTI)" == "define"
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
286 !IF "$(USE_PERLIO)" == "define"
287 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
289 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
293 !IF "$(USE_PERLIO)" == "define"
294 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
297 !IF "$(USE_ITHREADS)" == "define"
298 ARCHNAME = $(ARCHNAME)-thread
301 # Visual Studio 98 specific
302 !IF "$(CCTYPE)" == "MSVC60"
304 # VC 6.0 can load the socket dll on demand. Makes the test suite
305 # run in about 10% less time.
306 DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
309 ARCHDIR = ..\lib\$(ARCHNAME)
310 COREDIR = ..\lib\CORE
311 AUTODIR = ..\lib\auto
315 EXTUTILSDIR = $(LIBDIR)\ExtUtils
318 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
319 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
320 INST_LIB = $(INST_TOP)$(INST_VER)\lib
321 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
322 INST_COREDIR = $(INST_ARCHLIB)\CORE
323 INST_POD = $(INST_LIB)\pod
324 INST_HTML = $(INST_TOP)$(INST_VER)\html
327 # Programs to compile, build .lib files and link
332 LIB32 = $(LINK32) -lib
339 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
340 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
341 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
342 LOCDEFS = -DPERLDLL -DPERL_CORE
346 !IF "$(USE_PERLCRT)" != "define"
355 !IF "$(CFG)" == "Debug"
356 ! IF "$(CCTYPE)" == "MSVC20"
357 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
359 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
363 OPTIMIZE = -MD -DNDEBUG
365 ! IF "$(WIN64)" == "define"
366 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
367 OPTIMIZE = $(OPTIMIZE) -Ox -GL
368 LINK_DBG = $(LINK_DBG) -ltcg
370 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
371 OPTIMIZE = $(OPTIMIZE) -O1
372 #OPTIMIZE = $(OPTIMIZE) -O2
376 !IF "$(WIN64)" == "define"
377 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
378 OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
381 !IF "$(USE_PERLCRT)" != "define"
382 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
385 LIBBASEFILES = $(CRYPT_LIB) \
386 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
387 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
388 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
391 # win64 doesn't have some libs
392 !IF "$(WIN64)" != "define"
393 LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
396 # we add LIBC here, since we may be using PerlCRT.dll
397 LIBFILES = $(LIBBASEFILES) $(LIBC)
399 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
400 $(PCHFLAGS) $(OPTIMIZE)
401 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
402 -libpath:"$(INST_COREDIR)" \
403 -machine:$(PROCESSOR_ARCHITECTURE)
407 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
409 #################### do not edit below this line #######################
410 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
418 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
421 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
427 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
428 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
436 # makedef.pl must be updated if this changes, and this should normally
437 # only change when there is an incompatible revision of the public API.
438 PERLIMPLIB = ..\perl59.lib
439 PERLDLL = ..\perl59.dll
441 MINIPERL = ..\miniperl.exe
443 PERLEXE = ..\perl.exe
444 WPERLEXE = ..\wperl.exe
445 GLOBEXE = ..\perlglob.exe
446 CONFIGPM = ..\lib\Config.pm
447 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
450 # Nominate a target which causes extensions to be re-built
451 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
452 # on and really only the interface - i.e. the .def file used to export symbols
454 PERLDEP = perldll.def
456 PL2BAT = bin\pl2bat.pl
457 GLOBBAT = bin\perlglob.bat
498 !IF "$(WIN64)" == "define"
499 CFGSH_TMPL = config.vc64
500 CFGH_TMPL = config_H.vc64
502 CFGSH_TMPL = config.vc
503 CFGH_TMPL = config_H.vc
506 XCOPY = xcopy /f /r /i /d
507 RCOPY = xcopy /f /r /i /e /d
514 # filenames given to xsubpp must have forward slashes (since it puts
515 # full pathnames in #line strings)
516 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
555 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
557 !IF "$(PERL_MALLOC)" == "define"
558 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
561 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
568 # We need this for miniperl build unless we override canned
569 # config.h #define building mini\*
570 #!IF "$(USE_PERLIO)" == "define"
571 WIN32_SRC = $(WIN32_SRC) .\win32io.c
574 !IF "$(CRYPT_SRC)" != ""
575 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
578 DLL_SRC = $(DYNALOADER).c
624 .\include\sys\socket.h \
627 CORE_H = $(CORE_NOCFG_H) .\config.h
629 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
630 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
631 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
632 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
633 $(MINIDIR)\miniperlmain$(o) \
634 $(MINIDIR)\perlio$(o)
635 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
636 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
637 DLL_OBJ = $(DLL_SRC:.c=.obj)
638 X2P_OBJ = $(X2P_SRC:.c=.obj)
640 PERLDLL_OBJ = $(CORE_OBJ)
641 PERLEXE_OBJ = perlmain$(o)
643 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
644 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
646 !IF "$(USE_SETARGV)" != ""
647 SETARGV_OBJ = setargv$(o)
650 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
651 SOCKET = $(EXTDIR)\Socket\Socket
652 FCNTL = $(EXTDIR)\Fcntl\Fcntl
653 OPCODE = $(EXTDIR)\Opcode\Opcode
654 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
656 POSIX = $(EXTDIR)\POSIX\POSIX
657 ATTRS = $(EXTDIR)\attrs\attrs
658 THREAD = $(EXTDIR)\Thread\Thread
661 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
662 ERRNO = $(EXTDIR)\Errno\Errno
663 PEEK = $(EXTDIR)\Devel\Peek\Peek
664 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
665 DPROF = $(EXTDIR)\Devel\DProf\DProf
666 GLOB = $(EXTDIR)\File\Glob\Glob
667 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
668 STORABLE = $(EXTDIR)\Storable\Storable
669 FILTER = $(EXTDIR)\Filter\Util\Call\Call
670 ENCODE = $(EXTDIR)\Encode\Encode
671 MD5 = $(EXTDIR)\Digest\MD5\MD5
672 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
673 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
674 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
675 CWD = $(EXTDIR)\Cwd\Cwd
676 LISTUTIL = $(EXTDIR)\List\Util\Util
677 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
678 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
679 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
680 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
682 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
683 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
684 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
685 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
686 IO_DLL = $(AUTODIR)\IO\IO.dll
687 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
688 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
689 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
690 B_DLL = $(AUTODIR)\B\B.dll
691 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
692 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
693 RE_DLL = $(AUTODIR)\re\re.dll
694 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
695 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
696 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
697 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
698 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
699 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
700 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
701 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
702 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
703 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
704 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
705 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
706 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
707 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
708 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
709 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
710 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
741 $(UNICODENORMALIZE).c
764 $(PERLIOSCALAR_DLL) \
772 $(UNICODENORMALIZE_DLL)
774 POD2HTML = $(PODDIR)\pod2html
775 POD2MAN = $(PODDIR)\pod2man
776 POD2LATEX = $(PODDIR)\pod2latex
777 POD2TEXT = $(PODDIR)\pod2text
780 "INST_DRV=$(INST_DRV)" \
781 "INST_TOP=$(INST_TOP)" \
782 "INST_VER=$(INST_VER)" \
783 "INST_ARCH=$(INST_ARCH)" \
784 "archname=$(ARCHNAME)" \
787 "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
788 "cf_email=$(EMAIL)" \
789 "d_crypt=$(D_CRYPT)" \
790 "d_mymalloc=$(PERL_MALLOC)" \
792 "incpath=$(CCINCDIR:"=\")" \
793 "libperl=$(PERLIMPLIB:..\=)" \
794 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
796 "make=$(MAKE_BARE)" \
797 "usethreads=$(USE_ITHREADS)" \
798 "useithreads=$(USE_ITHREADS)" \
799 "usemultiplicity=$(USE_MULTI)" \
800 "useperlio=$(USE_PERLIO)" \
801 "uselargefiles=$(USE_LARGE_FILES)" \
802 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
803 "optimize=$(OPTIMIZE:"=\")"
809 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
811 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
813 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
815 #------------------------------------------------------------
817 $(GLOBEXE) : perlglob$(o)
818 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
819 perlglob$(o) setargv$(o)
821 perlglob$(o) : perlglob.c
823 config.w32 : $(CFGSH_TMPL)
824 copy $(CFGSH_TMPL) config.w32
826 .\config.h : $(CFGH_TMPL)
828 copy $(CFGH_TMPL) config.h
830 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
831 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
833 # this target is for when changes to the main config.sh happen
834 # edit config.{b,v,g}c and make this target once for each supported
835 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
837 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
839 -del /f perl.exe perl*.dll
844 -perl config_h.PL "INST_VER=$(INST_VER)"
845 rename config.h $(CFGH_TMPL)
847 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
851 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
852 $(XCOPY) ..\*.h $(COREDIR)\*.*
853 $(XCOPY) *.h $(COREDIR)\*.*
854 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
855 $(RCOPY) include $(COREDIR)\*.*
856 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
857 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
859 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
860 $(LINK32) -subsystem:console -out:$@ @<<
861 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
865 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
867 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
868 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
870 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
871 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
873 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
874 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
875 !IF "$(USE_IMP_SYS)" == "define"
876 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
877 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
880 # 1. we don't want to rebuild miniperl.exe when config.h changes
881 # 2. we don't want to rebuild miniperl.exe with non-default config.h
882 $(MINI_OBJ) : $(CORE_NOCFG_H)
884 $(WIN32_OBJ) : $(CORE_H)
885 $(CORE_OBJ) : $(CORE_H)
886 $(DLL_OBJ) : $(CORE_H)
887 $(X2P_OBJ) : $(CORE_H)
889 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
890 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
891 CCTYPE=$(CCTYPE) > perldll.def
893 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
894 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
895 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
897 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
899 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
901 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
904 ..\x2p\a2p$(o) : ..\x2p\a2p.c
905 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
907 ..\x2p\hash$(o) : ..\x2p\hash.c
908 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
910 ..\x2p\str$(o) : ..\x2p\str.c
911 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
913 ..\x2p\util$(o) : ..\x2p\util.c
914 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
916 ..\x2p\walk$(o) : ..\x2p\walk.c
917 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
919 $(X2P) : $(MINIPERL) $(X2P_OBJ)
920 $(MINIPERL) ..\x2p\find2perl.PL
921 $(MINIPERL) ..\x2p\s2p.PL
922 $(LINK32) -subsystem:console -out:$@ @<<
923 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
926 perlmain.c : runperl.c
927 copy runperl.c perlmain.c
929 perlmain$(o) : perlmain.c
930 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
932 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
933 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
934 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
935 copy $(PERLEXE) $(WPERLEXE)
936 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
938 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
940 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
941 if not exist $(AUTODIR) mkdir $(AUTODIR)
943 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
944 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
946 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
947 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
949 $(XSUBPP) dl_win32.xs > $(*B).c
952 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
953 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
955 #----------------------------------------------------------------------------------
956 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
957 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
960 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
962 #----------------------------------------------------------------------------------
965 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
966 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
967 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
969 # Note that this next section is parsed (and regenerated) by pod/buildtoc
970 # so please check that script before making structural changes here
972 utils: $(PERLEXE) $(X2P)
974 $(MAKE) PERL=$(MINIPERL)
976 copy ..\vms\perlvms.pod .\perlvms.pod
977 copy ..\README.aix ..\pod\perlaix.pod
978 copy ..\README.amiga ..\pod\perlamiga.pod
979 copy ..\README.apollo ..\pod\perlapollo.pod
980 copy ..\README.beos ..\pod\perlbeos.pod
981 copy ..\README.bs2000 ..\pod\perlbs2000.pod
982 copy ..\README.ce ..\pod\perlce.pod
983 copy ..\README.cn ..\pod\perlcn.pod
984 copy ..\README.cygwin ..\pod\perlcygwin.pod
985 copy ..\README.dgux ..\pod\perldgux.pod
986 copy ..\README.dos ..\pod\perldos.pod
987 copy ..\README.epoc ..\pod\perlepoc.pod
988 copy ..\README.freebsd ..\pod\perlfreebsd.pod
989 copy ..\README.hpux ..\pod\perlhpux.pod
990 copy ..\README.hurd ..\pod\perlhurd.pod
991 copy ..\README.irix ..\pod\perlirix.pod
992 copy ..\README.jp ..\pod\perljp.pod
993 copy ..\README.ko ..\pod\perlko.pod
994 copy ..\README.machten ..\pod\perlmachten.pod
995 copy ..\README.macos ..\pod\perlmacos.pod
996 copy ..\README.macosx ..\pod\perlmacosx.pod
997 copy ..\README.mint ..\pod\perlmint.pod
998 copy ..\README.mpeix ..\pod\perlmpeix.pod
999 copy ..\README.netware ..\pod\perlnetware.pod
1000 copy ..\README.os2 ..\pod\perlos2.pod
1001 copy ..\README.os390 ..\pod\perlos390.pod
1002 copy ..\README.os400 ..\pod\perlos400.pod
1003 copy ..\README.plan9 ..\pod\perlplan9.pod
1004 copy ..\README.qnx ..\pod\perlqnx.pod
1005 copy ..\README.solaris ..\pod\perlsolaris.pod
1006 copy ..\README.tru64 ..\pod\perltru64.pod
1007 copy ..\README.tw ..\pod\perltw.pod
1008 copy ..\README.uts ..\pod\perluts.pod
1009 copy ..\README.vmesa ..\pod\perlvmesa.pod
1010 copy ..\README.vms ..\pod\perlvms.pod
1011 copy ..\README.vos ..\pod\perlvos.pod
1012 copy ..\README.win32 ..\pod\perlwin32.pod
1013 $(MAKE) -f ..\win32\pod.mak converters
1015 $(PERLEXE) lib_pm.PL
1017 $(PERLEXE) $(PL2BAT) $(UTILS)
1019 # Note that the pod cleanup in this next section is parsed (and regenerated
1020 # by pod/buildtoc so please check that script before making changes here
1022 # the doubled rmdir calls are needed because older cmd shells
1023 # don't understand /q
1025 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1026 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1028 -del /f $(EXTENSION_DLL)
1029 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1030 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1031 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1032 -del /f $(LIBDIR)\XSLoader.pm
1033 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1034 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1035 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1036 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1037 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1038 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1039 -del /f $(LIBDIR)\File\Glob.pm
1040 -del /f $(LIBDIR)\Storable.pm
1041 -del /f $(LIBDIR)\Filter\Util\Call.pm
1042 -del /f $(LIBDIR)\Digest\MD5.pm
1043 -del /f $(LIBDIR)\PerlIO\scalar.pm
1044 -del /f $(LIBDIR)\PerlIO\via.pm
1045 -del /f $(LIBDIR)\MIME\Base64.pm
1046 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1047 -del /f $(LIBDIR)\List\Util.pm
1048 -del /f $(LIBDIR)\Scalar\Util.pm
1049 -del /f $(LIBDIR)\Time\HiRes.pm
1050 -del /f $(LIBDIR)\XS\APItest.pm
1051 -del /f $(LIBDIR)\XS\Typemap.pm
1052 -del /f $(LIBDIR)\Unicode\Normalize.pm
1053 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1054 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1055 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1056 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1057 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1058 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1059 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1060 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1061 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1062 -if exist $(LIBDIR)\Digest rmdir /s $(LIBDIR)\Digest
1063 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1064 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1065 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1066 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1067 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1068 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1069 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1070 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1072 -del /f *.html *.bat checkpods \
1073 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1074 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1075 perldgux.pod perldos.pod perlepoc.pod perlfreebsd.pod \
1076 perlhpux.pod perlhurd.pod perlirix.pod perljp.pod perlko.pod \
1077 perlmachten.pod perlmacos.pod perlmacosx.pod perlmint.pod \
1078 perlmpeix.pod perlnetware.pod perlos2.pod perlos390.pod \
1079 perlos400.pod perlplan9.pod perlqnx.pod perlsolaris.pod \
1080 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
1081 perlvms.pod perlvos.pod perlwin32.pod \
1082 pod2html pod2latex pod2man pod2text pod2usage \
1083 podchecker podselect
1085 -del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs perldoc perlivp \
1086 dprofpp perlcc libnetcfg enc2xs piconv cpan xsubpp instmodsh prove
1090 -del /f find2perl s2p psed
1093 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1097 -del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1100 -del /s *.def Makefile Makefile.old
1102 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1103 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1104 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1105 -if exist $(COREDIR) rmdir /s $(COREDIR)
1107 install : all installbare installhtml
1110 $(PERLEXE) ..\installperl
1111 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1112 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1113 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1116 $(RCOPY) html\*.* $(INST_HTML)\*.*
1118 inst_lib : $(CONFIGPM)
1119 copy splittree.pl ..
1120 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1121 $(RCOPY) ..\lib $(INST_LIB)\*.*
1123 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1124 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1125 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1129 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1132 test-prep : all utils
1133 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1134 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1135 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1139 $(PERLEXE) -I..\lib harness
1142 test-notty : test-prep
1143 set PERL_SKIP_TTY_TEST=1
1145 $(PERLEXE) -I..\lib harness
1149 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1150 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1151 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1153 $(PERLEXE) -I..\lib harness
1156 clean : Extensions_clean
1157 -@$(DEL) miniperlmain$(o)
1158 -@$(DEL) $(MINIPERL)
1159 -@$(DEL) perlglob$(o)
1160 -@$(DEL) perlmain$(o)
1165 -@$(DEL) $(WPERLEXE)
1167 -@$(DEL) $(CORE_OBJ)
1168 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1169 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1170 -@$(DEL) $(WIN32_OBJ)
1173 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1174 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1175 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1179 # Handy way to run perlbug -ok without having to install and run the
1180 # installed perlbug. We don't re-run the tests here - we trust the user.
1181 # Please *don't* use this unless all tests pass.
1182 # If you want to report test failures, use "nmake nok" instead.
1184 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1187 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1190 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1193 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok