2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 or later
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl511.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual C++ 98)
99 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
101 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
103 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
105 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
107 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
109 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
113 # uncomment next line if you want debug version of perl (big,slow)
114 # If not enabled, we automatically try to use maximum optimization
115 # with all compilers that are known to have a working optimizer.
120 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
121 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
122 # This currently requires VC 5.0 with Service Pack 3 or later.
123 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
124 # and follow the directions in the package to install.
126 # Not recommended if you have VC 6.x and you're not running Windows 9x.
128 #USE_PERLCRT = define
131 # uncomment to enable linking with setargv.obj under the Visual C
132 # compiler. Setting this options enables perl to expand wildcards in
133 # arguments, but it may be harder to use alternate methods like
134 # File::DosGlob that are more powerful. This option is supported only with
137 #USE_SETARGV = define
140 # if you want to have the crypt() builtin function implemented, leave this or
141 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
142 # version of des_fcrypt().
147 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
148 # library, uncomment this, and make sure the library exists (see README.win32)
149 # Specify the full pathname of the library.
151 #CRYPT_LIB = fcrypt.lib
154 # set this if you wish to use perl's malloc
155 # WARNING: Turning this on/off WILL break binary compatibility with extensions
156 # you may have compiled with/without it. Be prepared to recompile all
157 # extensions if you change the default. Currently, this cannot be enabled
158 # if you ask for USE_IMP_SYS above.
160 #PERL_MALLOC = define
163 # set this to enable debugging mstats
164 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
165 # be enabled without PERL_MALLOC as well.
167 #DEBUG_MSTATS = define
170 # set this to additionally provide a statically linked perl-static.exe.
171 # Note that dynamic loading will not work with this perl, so you must
172 # include required modules statically using the STATIC_EXT or ALL_STATIC
173 # variables below. A static library perl511s.lib will also be created.
174 # Ordinary perl.exe is not affected by this option.
176 #BUILD_STATIC = define
179 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
180 # extension get statically built
181 # This will result in a very large perl executable, but the main purpose
182 # is to have proper linking set so as to be able to create miscellaneous
183 # executables with different built-in extensions
189 # set the install locations of the compiler include/libraries
190 # Running VCVARS32.BAT is *required* when using Visual C.
191 # Some versions of Visual C don't define MSVCDIR in the environment,
192 # so you may have to set CCHOME explicitly (spaces in the path name should
197 CCINCDIR = $(CCHOME)\include
198 CCLIBDIR = $(CCHOME)\lib
201 # Additional compiler flags can be specified here.
203 BUILDOPT = $(BUILDOPTEXTRA)
206 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
207 # internal hash function unless the PERL_HASH_SEED environment variable is set.
208 # Alternatively, adding -DNO_HASH_SEED will completely disable the
209 # randomization feature.
210 # The latter is required to maintain binary compatibility with Perl 5.8.0.
212 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
213 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
216 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
217 # for old symbols by default, at the expense of extreme pollution. You most
218 # probably just want to build modules that won't compile with
219 # perl Makefile.PL POLLUTE=1
220 # instead of enabling this. Please report such modules to the respective
223 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
226 # This should normally be disabled. Enabling it will disable the File::Glob
227 # implementation of CORE::glob.
229 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
232 # This should normally be disabled. Enabling it causes perl to read scripts
233 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
235 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
238 # specify semicolon-separated list of extra directories that modules will
239 # look for libraries (spaces in path names need not be quoted)
244 # set this to your email address (perl will guess a value from
245 # from your loginname and your hostname, which may not be right)
250 ## Build configuration ends.
253 ##################### CHANGE THESE ONLY IF YOU MUST #####################
255 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
259 CRYPT_FLAG = -DHAVE_DES_FCRYPT
262 !IF "$(USE_IMP_SYS)" == "define"
267 !IF "$(PERL_MALLOC)" == ""
272 !IF "$(DEBUG_MSTATS)" == ""
276 !IF "$(DEBUG_MSTATS)" == "define"
277 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
280 !IF "$(USE_SITECUST)" == ""
284 !IF "$(USE_MULTI)" == ""
288 !IF "$(USE_ITHREADS)" == ""
292 !IF "$(USE_IMP_SYS)" == ""
296 !IF "$(USE_PERLIO)" == ""
300 !IF "$(USE_LARGE_FILES)" == ""
301 USE_LARGE_FILES = undef
304 !IF "$(USE_PERLCRT)" == ""
308 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
312 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
316 !IF "$(USE_SITECUST)" == "define"
317 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
320 !IF "$(USE_MULTI)" != "undef"
321 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
324 !IF "$(USE_IMP_SYS)" != "undef"
325 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
328 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
329 PROCESSOR_ARCHITECTURE = x86
333 # When we are running from a 32bit cmd.exe on AMD64 then
334 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
336 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
337 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
340 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
348 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
349 !IF "$(ARCHITECTURE)" == "AMD64"
352 !IF "$(ARCHITECTURE)" == "IA64"
356 !IF "$(USE_MULTI)" == "define"
357 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
359 !IF "$(USE_PERLIO)" == "define"
360 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
362 ARCHNAME = MSWin32-$(ARCHITECTURE)
366 !IF "$(USE_PERLIO)" == "define"
367 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
370 !IF "$(USE_ITHREADS)" == "define"
371 ARCHNAME = $(ARCHNAME)-thread
374 # Visual C++ 98, .NET 2003, 2005 and 2008 specific.
375 # VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
376 # in about 10% less time. (The free version of 7.x can't do this, but the free
377 # versions of 8.x and 9.x can.)
378 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
379 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
380 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
381 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
384 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
385 # DLLs. These either need copying everywhere with the binaries, or else need
386 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
387 # simplicity, embed them if they exist (and delete them afterwards so that they
388 # don't get installed too).
389 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
390 if exist $@.manifest del $@.manifest
391 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
392 if exist $@.manifest del $@.manifest
394 ARCHDIR = ..\lib\$(ARCHNAME)
395 COREDIR = ..\lib\CORE
396 AUTODIR = ..\lib\auto
402 EXTUTILSDIR = $(LIBDIR)\ExtUtils
406 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
407 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
408 INST_LIB = $(INST_TOP)$(INST_VER)\lib
409 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
410 INST_COREDIR = $(INST_ARCHLIB)\CORE
411 INST_HTML = $(INST_TOP)$(INST_VER)\html
414 # Programs to compile, build .lib files and link
419 LIB32 = $(LINK32) -lib
426 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
427 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
428 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
429 LOCDEFS = -DPERLDLL -DPERL_CORE
433 !IF "$(USE_PERLCRT)" != "define"
439 !IF "$(CFG)" == "Debug"
440 ! IF "$(CCTYPE)" == "MSVC20"
441 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
443 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
447 OPTIMIZE = -MD -Zi -DNDEBUG
448 # we enable debug symbols in release builds also
449 LINK_DBG = -debug -opt:ref,icf
450 # you may want to enable this if you want COFF symbols in the executables
451 # in addition to the PDB symbols. The default Dr. Watson that ships with
452 # Windows can use the the former but not latter. The free WinDbg can be
453 # installed to get better stack traces from just the PDB symbols, so we
454 # avoid the bloat of COFF symbols by default.
455 #LINK_DBG = $(LINK_DBG) -debugtype:both
456 ! IF "$(WIN64)" == "define"
457 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
458 OPTIMIZE = $(OPTIMIZE) -Ox -GL
459 LINK_DBG = $(LINK_DBG) -ltcg
461 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
462 OPTIMIZE = $(OPTIMIZE) -O1
463 #OPTIMIZE = $(OPTIMIZE) -O2
467 !IF "$(WIN64)" == "define"
468 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
469 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
472 # For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
473 # and POSIX CRT function names being deprecated.
474 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
475 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
476 DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
479 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
480 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
481 # do not require the fix.
482 !IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
483 ! IF "$(USE_PERLCRT)" != "define"
484 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
488 LIBBASEFILES = $(CRYPT_LIB) \
489 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
490 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
491 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
492 version.lib odbc32.lib odbccp32.lib
494 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
495 # include the buffer overrun verification code used by the /GS switch.
496 # Since the code links against libraries that are compiled with /GS, this
497 # "security cookie verification" must be included via bufferoverlow.lib.
498 !IF "$(WIN64)" == "define"
499 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
502 # we add LIBC here, since we may be using PerlCRT.dll
503 LIBFILES = $(LIBBASEFILES) $(LIBC)
505 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
506 EXTRACFLAGS = -nologo -GF -W3
507 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
508 $(PCHFLAGS) $(OPTIMIZE)
509 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
510 -libpath:"$(INST_COREDIR)" \
511 -machine:$(PROCESSOR_ARCHITECTURE)
516 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
518 #################### do not edit below this line #######################
519 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
527 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
530 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
536 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
537 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
546 # makedef.pl must be updated if this changes, and this should normally
547 # only change when there is an incompatible revision of the public API.
548 PERLIMPLIB = ..\perl511.lib
549 PERLSTATICLIB = ..\perl511s.lib
550 PERLDLL = ..\perl511.dll
552 MINIPERL = ..\miniperl.exe
554 PERLEXE = ..\perl.exe
555 WPERLEXE = ..\wperl.exe
556 PERLEXESTATIC = ..\perl-static.exe
557 GLOBEXE = ..\perlglob.exe
558 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
559 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
561 GENUUDMAP = ..\generate_uudmap.exe
562 !IF "$(BUILD_STATIC)" == "define"
568 # Unicode data files generated by mktables
569 FIRSTUNIFILE = ..\lib\unicore\Canonical.pl
570 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
571 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
572 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
573 ..\lib\unicore\PVA.pl
575 # Directories of Unicode data files generated by mktables
576 UNIDATADIR1 = ..\lib\unicore\To
577 UNIDATADIR2 = ..\lib\unicore\lib
579 PERLEXE_ICO = .\perlexe.ico
580 PERLEXE_RES = .\perlexe.res
583 # Nominate a target which causes extensions to be re-built
584 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
585 # on and really only the interface - i.e. the .def file used to export symbols
587 PERLDEP = perldll.def
589 PL2BAT = bin\pl2bat.pl
590 GLOBBAT = bin\perlglob.bat
606 ..\utils\config_data \
613 ..\utils\cpanp-run-perl \
637 !IF "$(WIN64)" == "define"
638 CFGSH_TMPL = config.vc64
639 CFGH_TMPL = config_H.vc64
641 CFGSH_TMPL = config.vc
642 CFGH_TMPL = config_H.vc
645 XCOPY = xcopy /f /r /i /d /y
646 RCOPY = xcopy /f /r /i /e /d /y
689 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
691 !IF "$(PERL_MALLOC)" == "define"
692 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
695 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
702 # We need this for miniperl build unless we override canned
703 # config.h #define building mini\*
704 #!IF "$(USE_PERLIO)" == "define"
705 WIN32_SRC = $(WIN32_SRC) .\win32io.c
708 !IF "$(CRYPT_SRC)" != ""
709 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
756 .\include\sys\socket.h \
759 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
761 UUDMAP_H = ..\uudmap.h
762 BITCOUNT_H = ..\bitcount.h
764 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
765 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
766 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
767 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
768 $(MINIDIR)\miniperlmain$(o) \
769 $(MINIDIR)\perlio$(o)
770 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
771 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
772 DLL_OBJ = $(DYNALOADER)
773 X2P_OBJ = $(X2P_SRC:.c=.obj)
774 GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj)
776 PERLDLL_OBJ = $(CORE_OBJ)
777 PERLEXE_OBJ = perlmain$(o)
778 PERLEXEST_OBJ = perlmainst$(o)
780 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
782 !IF "$(USE_SETARGV)" != ""
783 SETARGV_OBJ = setargv$(o)
786 !IF "$(ALL_STATIC)" == "define"
787 # some exclusions, unfortunately, until fixed:
788 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
789 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
790 # - Encode (encoding search algorithm relies on shared library?)
791 STATIC_EXT = * !Win32 !SDBM_File !Encode
793 # specify static extensions here, for example:
794 #STATIC_EXT = Cwd Compress/Raw/Zlib
795 STATIC_EXT = Win32CORE
798 DYNALOADER = ..\DynaLoader$(o)
801 "INST_DRV=$(INST_DRV)" \
802 "INST_TOP=$(INST_TOP)" \
803 "INST_VER=$(INST_VER)" \
804 "INST_ARCH=$(INST_ARCH)" \
805 "archname=$(ARCHNAME)" \
808 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
809 "cf_email=$(EMAIL)" \
810 "d_crypt=$(D_CRYPT)" \
811 "d_mymalloc=$(PERL_MALLOC)" \
813 "incpath=$(CCINCDIR:"=\")" \
814 "libperl=$(PERLIMPLIB:..\=)" \
815 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
817 "make=$(MAKE_BARE)" \
818 "static_ext=$(STATIC_EXT)" \
819 "usethreads=$(USE_ITHREADS)" \
820 "useithreads=$(USE_ITHREADS)" \
821 "usemultiplicity=$(USE_MULTI)" \
822 "useperlio=$(USE_PERLIO)" \
823 "uselargefiles=$(USE_LARGE_FILES)" \
824 "usesitecustomize=$(USE_SITECUST)" \
825 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
826 "optimize=$(OPTIMIZE:"=\")"
828 ICWD = -I..\cpan\Cwd -I..\cpan\Cwd\lib
834 all : .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
835 $(UNIDATAFILES) MakePPPort $(PERLEXE) $(X2P) Extensions_nonxs Extensions $(PERLSTATIC)
836 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
838 ..\regcharclass.h : ..\Porting\regcharclass.pl
840 miniperl Porting\regcharclass.pl
843 regnodes : ..\regnodes.h
845 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
847 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
849 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
850 $(UNIDATAFILES) $(PERLEXE) $(X2P) Extensions_reonly
851 @echo Perl and 're' are up to date.
853 static: $(PERLEXESTATIC)
855 #------------------------------------------------------------
857 $(GLOBEXE) : perlglob$(o)
858 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
859 perlglob$(o) setargv$(o)
862 perlglob$(o) : perlglob.c
864 config.w32 : $(CFGSH_TMPL)
865 copy $(CFGSH_TMPL) config.w32
867 .\config.h : $(CFGH_TMPL)
869 copy $(CFGH_TMPL) config.h
871 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
873 miniperl -Ilib make_patchnum.pl
876 # make sure that we recompile perl.c if the git version changes
877 ..\perl$(o) : ..\git_version.h
879 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
880 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
882 # this target is for when changes to the main config.sh happen.
883 # edit config.vc, then make perl in a minimal configuration (i.e. with MULTI,
884 # ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make this target
885 # to regenerate config_H.vc.
886 # repeat for config.vc64 and config_H.vc64 if you have a suitable build
887 # environment, otherwise hand-edit them to maintain the same differences with
888 # config.vc and config_H.vc as before.
889 # unfortunately, some further manual editing is also then required to restore all
890 # the special __GNUC__ handling that is otherwise lost.
892 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
893 $(MINIPERL) -I..\lib ..\configpm --chdir=..
895 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
896 rename config.h $(CFGH_TMPL)
898 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
899 $(MINIPERL) -I..\lib ..\configpm --chdir=..
900 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
901 $(XCOPY) ..\*.h $(COREDIR)\*.*
902 $(XCOPY) *.h $(COREDIR)\*.*
903 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
904 $(RCOPY) include $(COREDIR)\*.*
905 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
906 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
908 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
909 $(LINK32) -subsystem:console -out:$@ @<<
910 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
915 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
917 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
918 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
920 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
921 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
923 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
924 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
925 !IF "$(USE_IMP_SYS)" == "define"
926 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
927 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
930 # 1. we don't want to rebuild miniperl.exe when config.h changes
931 # 2. we don't want to rebuild miniperl.exe with non-default config.h
932 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
933 $(MINI_OBJ) : $(CORE_NOCFG_H)
935 $(WIN32_OBJ) : $(CORE_H)
936 $(CORE_OBJ) : $(CORE_H)
937 $(DLL_OBJ) : $(CORE_H)
938 $(X2P_OBJ) : $(CORE_H)
940 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
941 $(MINIPERL) -I..\lib create_perllibst_h.pl
942 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
943 CCTYPE=$(CCTYPE) > perldll.def
945 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
946 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
947 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
950 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
952 $(PERLSTATICLIB): Extensions_static
953 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
956 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
958 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
960 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
962 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
965 ..\x2p\a2p$(o) : ..\x2p\a2p.c
966 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
968 ..\x2p\hash$(o) : ..\x2p\hash.c
969 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
971 ..\x2p\str$(o) : ..\x2p\str.c
972 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
974 ..\x2p\util$(o) : ..\x2p\util.c
975 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
977 ..\x2p\walk$(o) : ..\x2p\walk.c
978 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
980 $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
981 $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
982 $(MINIPERL) -I..\lib ..\x2p\s2p.PL
983 $(LINK32) -subsystem:console -out:$@ @<<
984 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
988 $(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
990 $(UUDMAP_H) $(BITCOUNT_H) : $(GENUUDMAP)
991 $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
993 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
994 $(LINK32) -subsystem:console -out:$@ @<<
995 $(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ)
999 perlmain.c : runperl.c
1000 copy runperl.c perlmain.c
1002 perlmain$(o) : perlmain.c
1003 $(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c
1005 perlmainst.c : runperl.c
1006 copy runperl.c perlmainst.c
1008 perlmainst$(o) : perlmainst.c
1009 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1011 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1012 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1013 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1015 copy $(PERLEXE) $(WPERLEXE)
1016 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1018 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1019 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1020 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1021 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1024 MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1025 $(MINIPERL) -I..\lib $(ICWD) ..\mkppport
1028 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1030 #-------------------------------------------------------------------------------
1031 # There's no direct way to mark a dependency on
1032 # DynaLoader.pm, so this will have to do
1033 Extensions: ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1034 $(XCOPY) ..\*.h $(COREDIR)\*.*
1035 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1037 Extensions_reonly: ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1038 $(XCOPY) ..\*.h $(COREDIR)\*.*
1039 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1041 Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1042 $(XCOPY) ..\*.h $(COREDIR)\*.*
1043 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1044 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1046 Extensions_nonxs: ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1047 $(XCOPY) ..\*.h $(COREDIR)\*.*
1048 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1050 $(DYNALOADER) : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1051 $(XCOPY) ..\*.h $(COREDIR)\*.*
1052 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1055 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1057 Extensions_realclean:
1058 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1060 #-------------------------------------------------------------------------------
1062 doc: $(PERLEXE) ..\pod\perltoc.pod
1063 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1064 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1065 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1067 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1068 # so please check that script before making structural changes here
1070 utils: $(PERLEXE) $(X2P)
1072 $(MAKE) PERL=$(MINIPERL)
1074 copy ..\README.aix ..\pod\perlaix.pod
1075 copy ..\README.amiga ..\pod\perlamiga.pod
1076 copy ..\README.apollo ..\pod\perlapollo.pod
1077 copy ..\README.beos ..\pod\perlbeos.pod
1078 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1079 copy ..\README.ce ..\pod\perlce.pod
1080 copy ..\README.cn ..\pod\perlcn.pod
1081 copy ..\README.cygwin ..\pod\perlcygwin.pod
1082 copy ..\README.dgux ..\pod\perldgux.pod
1083 copy ..\README.dos ..\pod\perldos.pod
1084 copy ..\README.epoc ..\pod\perlepoc.pod
1085 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1086 copy ..\README.haiku ..\pod\perlhaiku.pod
1087 copy ..\README.hpux ..\pod\perlhpux.pod
1088 copy ..\README.hurd ..\pod\perlhurd.pod
1089 copy ..\README.irix ..\pod\perlirix.pod
1090 copy ..\README.jp ..\pod\perljp.pod
1091 copy ..\README.ko ..\pod\perlko.pod
1092 copy ..\README.linux ..\pod\perllinux.pod
1093 copy ..\README.macos ..\pod\perlmacos.pod
1094 copy ..\README.macosx ..\pod\perlmacosx.pod
1095 copy ..\README.mpeix ..\pod\perlmpeix.pod
1096 copy ..\README.netware ..\pod\perlnetware.pod
1097 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1098 copy ..\README.os2 ..\pod\perlos2.pod
1099 copy ..\README.os390 ..\pod\perlos390.pod
1100 copy ..\README.os400 ..\pod\perlos400.pod
1101 copy ..\README.plan9 ..\pod\perlplan9.pod
1102 copy ..\README.qnx ..\pod\perlqnx.pod
1103 copy ..\README.riscos ..\pod\perlriscos.pod
1104 copy ..\README.solaris ..\pod\perlsolaris.pod
1105 copy ..\README.symbian ..\pod\perlsymbian.pod
1106 copy ..\README.tru64 ..\pod\perltru64.pod
1107 copy ..\README.tw ..\pod\perltw.pod
1108 copy ..\README.uts ..\pod\perluts.pod
1109 copy ..\README.vmesa ..\pod\perlvmesa.pod
1110 copy ..\README.vos ..\pod\perlvos.pod
1111 copy ..\README.win32 ..\pod\perlwin32.pod
1112 copy ..\pod\perl5110delta.pod ..\pod\perldelta.pod
1113 $(MAKE) -f ..\win32\pod.mak converters
1115 $(PERLEXE) $(PL2BAT) $(UTILS)
1116 $(PERLEXE) $(ICWD) ..\autodoc.pl ..
1117 $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
1119 ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1120 $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
1122 # Note that the pod cleanup in this next section is parsed (and regenerated
1123 # by pod/buildtoc so please check that script before making changes here
1125 distclean: realclean
1126 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1127 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1128 $(PERLEXESTATIC) $(PERLSTATICLIB)
1130 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1131 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1132 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1133 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1134 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1135 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1136 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1137 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1138 -del /f $(LIBDIR)\Devel\PPPort.pm
1139 -del /f $(LIBDIR)\File\Glob.pm
1140 -del /f $(LIBDIR)\Storable.pm
1141 -del /f $(LIBDIR)\Digest\MD5.pm
1142 -del /f $(LIBDIR)\Digest\SHA.pm
1143 -del /f $(LIBDIR)\PerlIO\encoding.pm
1144 -del /f $(LIBDIR)\PerlIO\scalar.pm
1145 -del /f $(LIBDIR)\PerlIO\via.pm
1146 -del /f $(LIBDIR)\Sys\Hostname.pm
1147 -del /f $(LIBDIR)\threads\shared.pm
1148 -del /f $(LIBDIR)\Time\HiRes.pm
1149 -del /f $(LIBDIR)\Unicode\Normalize.pm
1150 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1151 -del /f $(LIBDIR)\Win32.pm
1152 -del /f $(LIBDIR)\Win32CORE.pm
1153 -del /f $(LIBDIR)\Win32API\File.pm
1154 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1155 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1156 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1157 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1158 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1159 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1160 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1161 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1162 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1163 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1164 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1165 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1166 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1167 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1168 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1169 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1170 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1171 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1172 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1173 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1174 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1175 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1176 -cd $(PODDIR) && del /f *.html *.bat podchecker \
1177 perlaix.pod perlamiga.pod perlapi.pod perlapollo.pod \
1178 perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
1179 perlcygwin.pod perldelta.pod perldgux.pod perldos.pod \
1180 perlepoc.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1181 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1182 perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
1183 perlmpeix.pod perlnetware.pod perlopenbsd.pod perlos2.pod \
1184 perlos390.pod perlos400.pod perlplan9.pod perlqnx.pod \
1185 perlriscos.pod perlsolaris.pod perlsymbian.pod perltoc.pod \
1186 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvos.pod \
1188 pod2html pod2latex pod2man pod2text pod2usage \
1189 podchecker podselect
1190 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1191 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1192 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1193 -cd ..\x2p && del /f find2perl s2p psed *.bat
1194 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1197 -del /f ..\lib\Config_git.pl
1201 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1202 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1203 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1204 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1205 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1206 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1207 -if exist pod2htmd.tmp del pod2htmd.tmp
1208 -if exist pod2htmi.tmp del pod2htmi.tmp
1209 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1210 -del /f ..\t\test_state
1212 install : all installbare installhtml
1214 installbare : utils ..\pod\perltoc.pod
1215 $(PERLEXE) ..\installperl
1216 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1217 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1218 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1219 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1220 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1221 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1224 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1226 inst_lib : $(CONFIGPM)
1227 $(RCOPY) ..\lib $(INST_LIB)\*.*
1229 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1230 cd ..\lib\unicore && \
1231 ..\$(MINIPERL) -I.. -I..\..\cpan\Cwd\lib mktables -check $@ $(FIRSTUNIFILE)
1233 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1234 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1235 if exist ..\t\perl.exe del /f ..\t\perl.exe
1236 rename ..\t\miniperl.exe perl.exe
1237 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1240 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1242 test-prep : all utils
1243 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1244 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1245 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1249 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1252 test-reonly : reonly utils
1253 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1254 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1255 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1257 $(PERLEXE) -I..\lib harness $(OPT) -re \bre\\/ $(EXTRA)
1265 test-notty : test-prep
1266 set PERL_SKIP_TTY_TEST=1
1268 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1272 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1273 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1274 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1276 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1280 -@$(DEL) miniperlmain$(o)
1281 -@$(DEL) $(MINIPERL)
1282 -@$(DEL) perlglob$(o)
1283 -@$(DEL) perlmain$(o)
1284 -@$(DEL) perlmainst$(o)
1287 -@$(DEL) ..\git_version.h
1290 -@$(DEL) $(WPERLEXE)
1291 -@$(DEL) $(PERLEXESTATIC)
1292 -@$(DEL) $(PERLSTATICLIB)
1294 -@$(DEL) $(CORE_OBJ)
1295 -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
1296 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1297 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1298 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1299 -@$(DEL) $(UNIDATAFILES)
1300 -@$(DEL) $(WIN32_OBJ)
1303 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1304 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1305 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1308 -@$(DEL) Extensions_static
1310 clean : Extensions_clean _clean
1312 realclean : Extensions_realclean MakePPPort_clean _clean
1314 # Handy way to run perlbug -ok without having to install and run the
1315 # installed perlbug. We don't re-run the tests here - we trust the user.
1316 # Please *don't* use this unless all tests pass.
1317 # If you want to report test failures, use "nmake nok" instead.
1319 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1322 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1325 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1328 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok