2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 or later
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl511.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual C++ 98)
99 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
101 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
103 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
105 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
107 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
109 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
113 # uncomment next line if you want debug version of perl (big,slow)
114 # If not enabled, we automatically try to use maximum optimization
115 # with all compilers that are known to have a working optimizer.
120 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
121 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
122 # This currently requires VC 5.0 with Service Pack 3 or later.
123 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
124 # and follow the directions in the package to install.
126 # Not recommended if you have VC 6.x and you're not running Windows 9x.
128 #USE_PERLCRT = define
131 # uncomment to enable linking with setargv.obj under the Visual C
132 # compiler. Setting this options enables perl to expand wildcards in
133 # arguments, but it may be harder to use alternate methods like
134 # File::DosGlob that are more powerful. This option is supported only with
137 #USE_SETARGV = define
140 # if you want to have the crypt() builtin function implemented, leave this or
141 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
142 # version of des_fcrypt().
147 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
148 # library, uncomment this, and make sure the library exists (see README.win32)
149 # Specify the full pathname of the library.
151 #CRYPT_LIB = fcrypt.lib
154 # set this if you wish to use perl's malloc
155 # WARNING: Turning this on/off WILL break binary compatibility with extensions
156 # you may have compiled with/without it. Be prepared to recompile all
157 # extensions if you change the default. Currently, this cannot be enabled
158 # if you ask for USE_IMP_SYS above.
160 #PERL_MALLOC = define
163 # set this to enable debugging mstats
164 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
165 # be enabled without PERL_MALLOC as well.
167 #DEBUG_MSTATS = define
170 # set this to additionally provide a statically linked perl-static.exe.
171 # Note that dynamic loading will not work with this perl, so you must
172 # include required modules statically using the STATIC_EXT or ALL_STATIC
173 # variables below. A static library perl511s.lib will also be created.
174 # Ordinary perl.exe is not affected by this option.
176 #BUILD_STATIC = define
179 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
180 # extension get statically built
181 # This will result in a very large perl executable, but the main purpose
182 # is to have proper linking set so as to be able to create miscellaneous
183 # executables with different built-in extensions
189 # set the install locations of the compiler include/libraries
190 # Running VCVARS32.BAT is *required* when using Visual C.
191 # Some versions of Visual C don't define MSVCDIR in the environment,
192 # so you may have to set CCHOME explicitly (spaces in the path name should
197 CCINCDIR = $(CCHOME)\include
198 CCLIBDIR = $(CCHOME)\lib
201 # Additional compiler flags can be specified here.
203 BUILDOPT = $(BUILDOPTEXTRA)
206 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
207 # internal hash function unless the PERL_HASH_SEED environment variable is set.
208 # Alternatively, adding -DNO_HASH_SEED will completely disable the
209 # randomization feature.
210 # The latter is required to maintain binary compatibility with Perl 5.8.0.
212 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
213 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
216 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
217 # for old symbols by default, at the expense of extreme pollution. You most
218 # probably just want to build modules that won't compile with
219 # perl Makefile.PL POLLUTE=1
220 # instead of enabling this. Please report such modules to the respective
223 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
226 # This should normally be disabled. Enabling it will disable the File::Glob
227 # implementation of CORE::glob.
229 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
232 # This should normally be disabled. Enabling it causes perl to read scripts
233 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
235 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
238 # specify semicolon-separated list of extra directories that modules will
239 # look for libraries (spaces in path names need not be quoted)
244 # set this to your email address (perl will guess a value from
245 # from your loginname and your hostname, which may not be right)
250 ## Build configuration ends.
253 ##################### CHANGE THESE ONLY IF YOU MUST #####################
255 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
259 CRYPT_FLAG = -DHAVE_DES_FCRYPT
262 !IF "$(USE_IMP_SYS)" == "define"
267 !IF "$(PERL_MALLOC)" == ""
272 !IF "$(DEBUG_MSTATS)" == ""
276 !IF "$(DEBUG_MSTATS)" == "define"
277 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
280 !IF "$(USE_SITECUST)" == ""
284 !IF "$(USE_MULTI)" == ""
288 !IF "$(USE_ITHREADS)" == ""
292 !IF "$(USE_IMP_SYS)" == ""
296 !IF "$(USE_PERLIO)" == ""
300 !IF "$(USE_LARGE_FILES)" == ""
301 USE_LARGE_FILES = undef
304 !IF "$(USE_PERLCRT)" == ""
308 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
312 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
316 !IF "$(USE_SITECUST)" == "define"
317 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
320 !IF "$(USE_MULTI)" != "undef"
321 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
324 !IF "$(USE_IMP_SYS)" != "undef"
325 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
328 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
329 PROCESSOR_ARCHITECTURE = x86
333 # When we are running from a 32bit cmd.exe on AMD64 then
334 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
336 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
337 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
340 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
348 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
349 !IF "$(ARCHITECTURE)" == "AMD64"
352 !IF "$(ARCHITECTURE)" == "IA64"
356 !IF "$(USE_MULTI)" == "define"
357 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
359 !IF "$(USE_PERLIO)" == "define"
360 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
362 ARCHNAME = MSWin32-$(ARCHITECTURE)
366 !IF "$(USE_PERLIO)" == "define"
367 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
370 !IF "$(USE_ITHREADS)" == "define"
371 ARCHNAME = $(ARCHNAME)-thread
374 # Visual C++ 98, .NET 2003, 2005 and 2008 specific.
375 # VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
376 # in about 10% less time. (The free version of 7.x can't do this, but the free
377 # versions of 8.x and 9.x can.)
378 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
379 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
380 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
381 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
384 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
385 # DLLs. These either need copying everywhere with the binaries, or else need
386 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. Embed
387 # them for simplicity, and delete them afterwards so that they don't get
389 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
390 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
391 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
392 if exist $@.manifest del $@.manifest
393 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
394 if exist $@.manifest del $@.manifest
397 ARCHDIR = ..\lib\$(ARCHNAME)
398 COREDIR = ..\lib\CORE
399 AUTODIR = ..\lib\auto
403 EXTUTILSDIR = $(LIBDIR)\ExtUtils
407 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
408 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
409 INST_LIB = $(INST_TOP)$(INST_VER)\lib
410 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
411 INST_COREDIR = $(INST_ARCHLIB)\CORE
412 INST_HTML = $(INST_TOP)$(INST_VER)\html
415 # Programs to compile, build .lib files and link
420 LIB32 = $(LINK32) -lib
427 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
428 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
429 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
430 LOCDEFS = -DPERLDLL -DPERL_CORE
434 !IF "$(USE_PERLCRT)" != "define"
440 !IF "$(CFG)" == "Debug"
441 ! IF "$(CCTYPE)" == "MSVC20"
442 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
444 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
448 OPTIMIZE = -MD -Zi -DNDEBUG
449 # we enable debug symbols in release builds also
450 LINK_DBG = -debug -opt:ref,icf
451 # you may want to enable this if you want COFF symbols in the executables
452 # in addition to the PDB symbols. The default Dr. Watson that ships with
453 # Windows can use the the former but not latter. The free WinDbg can be
454 # installed to get better stack traces from just the PDB symbols, so we
455 # avoid the bloat of COFF symbols by default.
456 #LINK_DBG = $(LINK_DBG) -debugtype:both
457 ! IF "$(WIN64)" == "define"
458 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
459 OPTIMIZE = $(OPTIMIZE) -Ox -GL
460 LINK_DBG = $(LINK_DBG) -ltcg
462 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
463 OPTIMIZE = $(OPTIMIZE) -O1
464 #OPTIMIZE = $(OPTIMIZE) -O2
468 !IF "$(WIN64)" == "define"
469 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
470 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
473 # For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
474 # and POSIX CRT function names being deprecated.
475 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
476 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
477 DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
480 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
481 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
482 # do not require the fix.
483 !IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
484 ! IF "$(USE_PERLCRT)" != "define"
485 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
489 LIBBASEFILES = $(CRYPT_LIB) \
490 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
491 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
492 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
493 version.lib odbc32.lib odbccp32.lib
495 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
496 # include the buffer overrun verification code used by the /GS switch.
497 # Since the code links against libraries that are compiled with /GS, this
498 # "security cookie verification" must be included via bufferoverlow.lib.
499 !IF "$(WIN64)" == "define"
500 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
503 # we add LIBC here, since we may be using PerlCRT.dll
504 LIBFILES = $(LIBBASEFILES) $(LIBC)
506 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
507 EXTRACFLAGS = -nologo -GF -W3
508 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
509 $(PCHFLAGS) $(OPTIMIZE)
510 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
511 -libpath:"$(INST_COREDIR)" \
512 -machine:$(PROCESSOR_ARCHITECTURE)
517 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
519 #################### do not edit below this line #######################
520 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
528 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
531 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
537 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
538 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
547 # makedef.pl must be updated if this changes, and this should normally
548 # only change when there is an incompatible revision of the public API.
549 PERLIMPLIB = ..\perl511.lib
550 PERLSTATICLIB = ..\perl511s.lib
551 PERLDLL = ..\perl511.dll
553 MINIPERL = ..\miniperl.exe
555 PERLEXE = ..\perl.exe
556 WPERLEXE = ..\wperl.exe
557 PERLEXESTATIC = ..\perl-static.exe
558 GLOBEXE = ..\perlglob.exe
559 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
560 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
562 GENUUDMAP = ..\generate_uudmap.exe
563 !IF "$(BUILD_STATIC)" == "define"
569 # Unicode data files generated by mktables
570 FIRSTUNIFILE = ..\lib\unicore\Canonical.pl
571 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
572 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
573 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
574 ..\lib\unicore\PVA.pl
576 # Directories of Unicode data files generated by mktables
577 UNIDATADIR1 = ..\lib\unicore\To
578 UNIDATADIR2 = ..\lib\unicore\lib
580 PERLEXE_ICO = .\perlexe.ico
581 PERLEXE_RES = .\perlexe.res
584 # Nominate a target which causes extensions to be re-built
585 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
586 # on and really only the interface - i.e. the .def file used to export symbols
588 PERLDEP = perldll.def
590 PL2BAT = bin\pl2bat.pl
591 GLOBBAT = bin\perlglob.bat
607 ..\utils\config_data \
614 ..\utils\cpanp-run-perl \
638 !IF "$(WIN64)" == "define"
639 CFGSH_TMPL = config.vc64
640 CFGH_TMPL = config_H.vc64
642 CFGSH_TMPL = config.vc
643 CFGH_TMPL = config_H.vc
646 XCOPY = xcopy /f /r /i /d /y
647 RCOPY = xcopy /f /r /i /e /d /y
654 # filenames given to xsubpp must have forward slashes (since it puts
655 # full pathnames in #line strings)
656 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
697 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
699 !IF "$(PERL_MALLOC)" == "define"
700 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
703 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
710 # We need this for miniperl build unless we override canned
711 # config.h #define building mini\*
712 #!IF "$(USE_PERLIO)" == "define"
713 WIN32_SRC = $(WIN32_SRC) .\win32io.c
716 !IF "$(CRYPT_SRC)" != ""
717 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
720 DLL_SRC = $(DYNALOADER).c
766 .\include\sys\socket.h \
769 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
771 UUDMAP_H = ..\uudmap.h
773 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
774 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
775 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
776 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
777 $(MINIDIR)\miniperlmain$(o) \
778 $(MINIDIR)\perlio$(o)
779 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
780 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
781 DLL_OBJ = $(DLL_SRC:.c=.obj)
782 X2P_OBJ = $(X2P_SRC:.c=.obj)
783 GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj)
785 PERLDLL_OBJ = $(CORE_OBJ)
786 PERLEXE_OBJ = perlmain$(o)
787 PERLEXEST_OBJ = perlmainst$(o)
789 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
791 !IF "$(USE_SETARGV)" != ""
792 SETARGV_OBJ = setargv$(o)
795 !IF "$(ALL_STATIC)" == "define"
796 # some exclusions, unfortunately, until fixed:
797 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
798 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
799 # - Encode (encoding search algorithm relies on shared library?)
800 STATIC_EXT = * !Win32 !SDBM_File !Encode
802 # specify static extensions here, for example:
803 #STATIC_EXT = Cwd Compress/Raw/Zlib
804 STATIC_EXT = Win32CORE
807 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
810 "INST_DRV=$(INST_DRV)" \
811 "INST_TOP=$(INST_TOP)" \
812 "INST_VER=$(INST_VER)" \
813 "INST_ARCH=$(INST_ARCH)" \
814 "archname=$(ARCHNAME)" \
817 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
818 "cf_email=$(EMAIL)" \
819 "d_crypt=$(D_CRYPT)" \
820 "d_mymalloc=$(PERL_MALLOC)" \
822 "incpath=$(CCINCDIR:"=\")" \
823 "libperl=$(PERLIMPLIB:..\=)" \
824 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
826 "make=$(MAKE_BARE)" \
827 "static_ext=$(STATIC_EXT)" \
828 "usethreads=$(USE_ITHREADS)" \
829 "useithreads=$(USE_ITHREADS)" \
830 "usemultiplicity=$(USE_MULTI)" \
831 "useperlio=$(USE_PERLIO)" \
832 "uselargefiles=$(USE_LARGE_FILES)" \
833 "usesitecustomize=$(USE_SITECUST)" \
834 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
835 "optimize=$(OPTIMIZE:"=\")"
841 all : .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
842 $(UNIDATAFILES) MakePPPort $(PERLEXE) $(X2P) Extensions $(PERLSTATIC)
843 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
845 ..\regcharclass.h : ..\Porting\regcharclass.pl
847 miniperl Porting\regcharclass.pl
850 regnodes : ..\regnodes.h
852 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
854 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
856 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
857 $(UNIDATAFILES) $(PERLEXE) $(X2P) Extensions_reonly
858 @echo Perl and 're' are up to date.
860 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
862 static: $(PERLEXESTATIC)
864 #------------------------------------------------------------
866 $(GLOBEXE) : perlglob$(o)
867 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
868 perlglob$(o) setargv$(o)
871 perlglob$(o) : perlglob.c
873 config.w32 : $(CFGSH_TMPL)
874 copy $(CFGSH_TMPL) config.w32
876 .\config.h : $(CFGH_TMPL)
878 copy $(CFGH_TMPL) config.h
880 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
882 miniperl -Ilib make_patchnum.pl
885 # make sure that we recompile perl.c if the git version changes
886 ..\perl$(o) : ..\git_version.h
888 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
889 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
891 # this target is for when changes to the main config.sh happen.
892 # edit config.vc, then make perl in a minimal configuration (i.e. with MULTI,
893 # ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make this target
894 # to regenerate config_H.vc.
895 # repeat for config.vc64 and config_H.vc64 if you have a suitable build
896 # environment, otherwise hand-edit them to maintain the same differences with
897 # config.vc and config_H.vc as before.
898 # unfortunately, some further manual editing is also then required to restore all
899 # the special __GNUC__ handling that is otherwise lost.
901 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
906 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
907 rename config.h $(CFGH_TMPL)
909 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
913 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
914 $(XCOPY) ..\*.h $(COREDIR)\*.*
915 $(XCOPY) *.h $(COREDIR)\*.*
916 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
917 $(RCOPY) include $(COREDIR)\*.*
918 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
919 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
921 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
922 $(LINK32) -subsystem:console -out:$@ @<<
923 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
928 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
930 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
931 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
933 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
934 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
936 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
937 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
938 !IF "$(USE_IMP_SYS)" == "define"
939 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
940 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
943 # 1. we don't want to rebuild miniperl.exe when config.h changes
944 # 2. we don't want to rebuild miniperl.exe with non-default config.h
945 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
946 $(MINI_OBJ) : $(CORE_NOCFG_H)
948 $(WIN32_OBJ) : $(CORE_H)
949 $(CORE_OBJ) : $(CORE_H)
950 $(DLL_OBJ) : $(CORE_H)
951 $(X2P_OBJ) : $(CORE_H)
953 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
954 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
955 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
956 CCTYPE=$(CCTYPE) > perldll.def
958 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
959 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
960 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
963 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
965 $(PERLSTATICLIB): Extensions_static
966 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
969 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
971 $(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
972 $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
974 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
976 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
978 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
981 ..\x2p\a2p$(o) : ..\x2p\a2p.c
982 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
984 ..\x2p\hash$(o) : ..\x2p\hash.c
985 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
987 ..\x2p\str$(o) : ..\x2p\str.c
988 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
990 ..\x2p\util$(o) : ..\x2p\util.c
991 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
993 ..\x2p\walk$(o) : ..\x2p\walk.c
994 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
996 $(X2P) : $(MINIPERL) $(X2P_OBJ)
997 $(MINIPERL) ..\x2p\find2perl.PL
998 $(MINIPERL) ..\x2p\s2p.PL
999 $(LINK32) -subsystem:console -out:$@ @<<
1000 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1004 $(MINIDIR)\globals$(o) : $(UUDMAP_H)
1006 $(UUDMAP_H) : $(GENUUDMAP)
1007 $(GENUUDMAP) >$(UUDMAP_H)
1009 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1010 $(LINK32) -subsystem:console -out:$@ @<<
1011 $(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ)
1015 perlmain.c : runperl.c
1016 copy runperl.c perlmain.c
1018 perlmain$(o) : perlmain.c
1019 $(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c
1021 perlmainst.c : runperl.c
1022 copy runperl.c perlmainst.c
1024 perlmainst$(o) : perlmainst.c
1025 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1027 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1028 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1029 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1031 copy $(PERLEXE) $(WPERLEXE)
1032 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1033 copy splittree.pl ..
1034 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1036 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1037 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1038 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1039 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1042 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1043 if not exist $(AUTODIR) mkdir $(AUTODIR)
1045 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1046 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1048 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1049 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1051 $(XSUBPP) dl_win32.xs > $(*B).c
1054 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1055 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1057 MakePPPort: $(MINIPERL) $(CONFIGPM)
1058 $(MINIPERL) -I..\lib ..\mkppport
1061 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1063 #-------------------------------------------------------------------------------
1064 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1065 $(XCOPY) ..\*.h $(COREDIR)\*.*
1066 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1067 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1069 Extensions_reonly: buildext.pl $(PERLDEP) $(CONFIGPM)
1070 $(XCOPY) ..\*.h $(COREDIR)\*.*
1071 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1072 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1074 Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
1075 $(XCOPY) ..\*.h $(COREDIR)\*.*
1076 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1077 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1078 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1081 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1082 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1084 Extensions_realclean:
1085 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1086 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1088 #-------------------------------------------------------------------------------
1091 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1092 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1093 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1095 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1096 # so please check that script before making structural changes here
1098 utils: $(PERLEXE) $(X2P)
1100 $(MAKE) PERL=$(MINIPERL)
1102 copy ..\vms\perlvms.pod .\perlvms.pod
1103 copy ..\README.aix ..\pod\perlaix.pod
1104 copy ..\README.amiga ..\pod\perlamiga.pod
1105 copy ..\README.apollo ..\pod\perlapollo.pod
1106 copy ..\README.beos ..\pod\perlbeos.pod
1107 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1108 copy ..\README.ce ..\pod\perlce.pod
1109 copy ..\README.cn ..\pod\perlcn.pod
1110 copy ..\README.cygwin ..\pod\perlcygwin.pod
1111 copy ..\README.dgux ..\pod\perldgux.pod
1112 copy ..\README.dos ..\pod\perldos.pod
1113 copy ..\README.epoc ..\pod\perlepoc.pod
1114 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1115 copy ..\README.haiku ..\pod\perlhaiku.pod
1116 copy ..\README.hpux ..\pod\perlhpux.pod
1117 copy ..\README.hurd ..\pod\perlhurd.pod
1118 copy ..\README.irix ..\pod\perlirix.pod
1119 copy ..\README.jp ..\pod\perljp.pod
1120 copy ..\README.ko ..\pod\perlko.pod
1121 copy ..\README.linux ..\pod\perllinux.pod
1122 copy ..\README.machten ..\pod\perlmachten.pod
1123 copy ..\README.macos ..\pod\perlmacos.pod
1124 copy ..\README.macosx ..\pod\perlmacosx.pod
1125 copy ..\README.mint ..\pod\perlmint.pod
1126 copy ..\README.mpeix ..\pod\perlmpeix.pod
1127 copy ..\README.netware ..\pod\perlnetware.pod
1128 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1129 copy ..\README.os2 ..\pod\perlos2.pod
1130 copy ..\README.os390 ..\pod\perlos390.pod
1131 copy ..\README.os400 ..\pod\perlos400.pod
1132 copy ..\README.plan9 ..\pod\perlplan9.pod
1133 copy ..\README.qnx ..\pod\perlqnx.pod
1134 copy ..\README.riscos ..\pod\perlriscos.pod
1135 copy ..\README.solaris ..\pod\perlsolaris.pod
1136 copy ..\README.symbian ..\pod\perlsymbian.pod
1137 copy ..\README.tru64 ..\pod\perltru64.pod
1138 copy ..\README.tw ..\pod\perltw.pod
1139 copy ..\README.uts ..\pod\perluts.pod
1140 copy ..\README.vmesa ..\pod\perlvmesa.pod
1141 copy ..\README.vms ..\pod\perlvms.pod
1142 copy ..\README.vos ..\pod\perlvos.pod
1143 copy ..\README.win32 ..\pod\perlwin32.pod
1144 copy ..\pod\perl5110delta.pod ..\pod\perldelta.pod
1145 $(MAKE) -f ..\win32\pod.mak converters
1147 $(PERLEXE) lib_pm.PL
1149 $(PERLEXE) $(PL2BAT) $(UTILS)
1151 # Note that the pod cleanup in this next section is parsed (and regenerated
1152 # by pod/buildtoc so please check that script before making changes here
1154 distclean: realclean
1155 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1156 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1157 $(PERLEXESTATIC) $(PERLSTATICLIB)
1159 -del /f $(DYNALOADER).c
1160 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1161 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1162 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1163 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1164 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1165 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1166 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1167 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1168 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1169 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1170 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1171 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1172 -del /f $(LIBDIR)\Devel\PPPort.pm
1173 -del /f $(LIBDIR)\File\Glob.pm
1174 -del /f $(LIBDIR)\Storable.pm
1175 -del /f $(LIBDIR)\Digest\MD5.pm
1176 -del /f $(LIBDIR)\Digest\SHA.pm
1177 -del /f $(LIBDIR)\PerlIO\encoding.pm
1178 -del /f $(LIBDIR)\PerlIO\scalar.pm
1179 -del /f $(LIBDIR)\PerlIO\via.pm
1180 -del /f $(LIBDIR)\Sys\Hostname.pm
1181 -del /f $(LIBDIR)\threads\shared.pm
1182 -del /f $(LIBDIR)\Time\HiRes.pm
1183 -del /f $(LIBDIR)\Unicode\Normalize.pm
1184 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1185 -del /f $(LIBDIR)\Win32.pm
1186 -del /f $(LIBDIR)\Win32CORE.pm
1187 -del /f $(LIBDIR)\Win32API\File.pm
1188 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1189 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1190 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1191 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1192 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1193 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1194 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1195 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1196 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1197 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1198 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1199 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1200 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1201 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1202 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1203 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1204 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1205 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1206 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1207 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1208 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1209 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1210 -cd $(PODDIR) && del /f *.html *.bat podchecker \
1211 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1212 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1213 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1214 perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \
1215 perlirix.pod perljp.pod perlko.pod perllinux.pod \
1216 perlmachten.pod perlmacos.pod perlmacosx.pod perlmint.pod \
1217 perlmpeix.pod perlnetware.pod perlopenbsd.pod perlos2.pod \
1218 perlos390.pod perlos400.pod perlplan9.pod perlqnx.pod \
1219 perlriscos.pod perlsolaris.pod perlsymbian.pod perltru64.pod \
1220 perltw.pod perluts.pod perlvmesa.pod perlvms.pod perlvms.pod \
1221 perlvos.pod perlwin32.pod \
1222 pod2html pod2latex pod2man pod2text pod2usage \
1223 podchecker podselect
1224 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1225 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1226 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1227 -cd ..\x2p && del /f find2perl s2p psed *.bat
1228 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1231 -del /f ..\lib\Config_git.pl
1234 -del /f $(PERLEXE_ICO) perl.base
1235 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1236 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1237 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1238 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1239 -if exist pod2htmd.tmp del pod2htmd.tmp
1240 -if exist pod2htmi.tmp del pod2htmi.tmp
1241 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1242 -del /f ..\t\test_state
1244 install : all installbare installhtml
1247 $(PERLEXE) ..\installperl
1248 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1249 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1250 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1251 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1252 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1253 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1256 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1258 inst_lib : $(CONFIGPM)
1259 copy splittree.pl ..
1260 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1261 $(RCOPY) ..\lib $(INST_LIB)\*.*
1263 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1264 cd ..\lib\unicore && \
1265 ..\$(MINIPERL) -I.. mktables -check $@ $(FIRSTUNIFILE)
1267 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1268 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1269 if exist ..\t\perl.exe del /f ..\t\perl.exe
1270 rename ..\t\miniperl.exe perl.exe
1271 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1274 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1276 test-prep : all utils unpack_files
1277 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1278 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1279 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1283 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1287 $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
1289 cleanup_unpacked_files:
1290 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
1292 test-reonly : reonly utils
1293 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1294 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1295 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1297 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA)
1305 test-notty : test-prep
1306 set PERL_SKIP_TTY_TEST=1
1308 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1312 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1313 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1314 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1316 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1320 -@$(DEL) miniperlmain$(o)
1321 -@$(DEL) $(MINIPERL)
1322 -@$(DEL) perlglob$(o)
1323 -@$(DEL) perlmain$(o)
1324 -@$(DEL) perlmainst$(o)
1327 -@$(DEL) ..\git_version.h
1330 -@$(DEL) $(WPERLEXE)
1331 -@$(DEL) $(PERLEXESTATIC)
1332 -@$(DEL) $(PERLSTATICLIB)
1334 -@$(DEL) $(CORE_OBJ)
1335 -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H)
1336 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1337 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1338 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1339 -@$(DEL) $(UNIDATAFILES)
1340 -@$(DEL) $(WIN32_OBJ)
1343 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1344 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1345 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1348 -@$(DEL) Extensions_static
1350 _preclean : cleanup_unpacked_files
1352 clean : _preclean Extensions_clean _clean
1354 realclean : _preclean Extensions_realclean MakePPPort_clean _clean
1356 # Handy way to run perlbug -ok without having to install and run the
1357 # installed perlbug. We don't re-run the tests here - we trust the user.
1358 # Please *don't* use this unless all tests pass.
1359 # If you want to report test failures, use "nmake nok" instead.
1361 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1364 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1367 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1370 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok