2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools **experimental**
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # uncomment to enable multiple interpreters. This is need for fork()
50 # emulation and for thread support.
55 # Beginnings of interpreter cloning/threads; now reasonably complete.
56 # This should be enabled to get the fork() emulation. This needs
62 # uncomment to enable the implicit "host" layer for all system calls
63 # made by perl. This needs USE_MULTI above. This is also needed to
69 # Comment out next assign to disable perl's I/O subsystem and use compiler's
70 # stdio for IO - depending on your compiler vendor and run time library you may
71 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
72 # You will also be unable to take full advantage of perl5.8's support for multiple
73 # encodings and may see lower IO performance. You have been warned.
77 # Comment this out if you don't want to enable large file support for
78 # some reason. Should normally only be changed to maintain compatibility
79 # with an older release of perl.
80 USE_LARGE_FILES = define
83 # uncomment one of the following lines if you are using either
84 # Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
90 # uncomment next line if you want debug version of perl (big,slow)
91 # If not enabled, we automatically try to use maximum optimization
92 # with all compilers that are known to have a working optimizer.
97 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
98 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
99 # This currently requires VC 5.0 with Service Pack 3 or later.
100 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
101 # and follow the directions in the package to install.
103 # Not recommended if you have VC 6.x and you're not running Windows 9x.
105 #USE_PERLCRT = define
108 # uncomment to enable linking with setargv.obj under the Visual C
109 # compiler. Setting this options enables perl to expand wildcards in
110 # arguments, but it may be harder to use alternate methods like
111 # File::DosGlob that are more powerful. This option is supported only with
114 #USE_SETARGV = define
117 # if you have the source for des_fcrypt(), uncomment this and make sure the
118 # file exists (see README.win32). File should be located in the same
119 # directory as this file.
121 #CRYPT_SRC = fcrypt.c
124 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
125 # library, uncomment this, and make sure the library exists (see README.win32)
126 # Specify the full pathname of the library.
128 #CRYPT_LIB = fcrypt.lib
131 # set this if you wish to use perl's malloc
132 # WARNING: Turning this on/off WILL break binary compatibility with extensions
133 # you may have compiled with/without it. Be prepared to recompile all
134 # extensions if you change the default. Currently, this cannot be enabled
135 # if you ask for USE_IMP_SYS above.
137 #PERL_MALLOC = define
140 # set the install locations of the compiler include/libraries
141 # Running VCVARS32.BAT is *required* when using Visual C.
142 # Some versions of Visual C don't define MSVCDIR in the environment,
143 # so you may have to set CCHOME explicitly (spaces in the path name should
148 CCINCDIR = $(CCHOME)\include
149 CCLIBDIR = $(CCHOME)\lib
152 # Additional compiler flags can be specified here.
156 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
157 # for old symbols by default, at the expense of extreme pollution. You most
158 # probably just want to build modules that won't compile with
159 # perl Makefile.PL POLLUTE=1
160 # instead of enabling this. Please report such modules to the respective
163 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
166 # This should normally be disabled. Enabling it will disable the File::Glob
167 # implementation of CORE::glob.
169 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
172 # This should normally be disabled. Enabling it causes perl to read scripts
173 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
174 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
177 # specify semicolon-separated list of extra directories that modules will
178 # look for libraries (spaces in path names need not be quoted)
183 # set this to your email address (perl will guess a value from
184 # from your loginname and your hostname, which may not be right)
189 ## Build configuration ends.
192 ##################### CHANGE THESE ONLY IF YOU MUST #####################
194 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
198 CRYPT_FLAG = -DHAVE_DES_FCRYPT
201 !IF "$(PERL_MALLOC)" == ""
205 !IF "$(USE_IMP_SYS)" == "define"
209 !IF "$(USE_MULTI)" == ""
213 !IF "$(USE_ITHREADS)" == ""
217 !IF "$(USE_IMP_SYS)" == ""
221 !IF "$(USE_PERLIO)" == ""
225 !IF "$(USE_LARGE_FILES)" == ""
226 USE_LARGE_FILES = undef
229 !IF "$(USE_PERLCRT)" == ""
233 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
237 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
241 !IF "$(USE_MULTI)" != "undef"
242 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
245 !IF "$(USE_IMP_SYS)" != "undef"
246 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
249 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
250 PROCESSOR_ARCHITECTURE = x86
254 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
255 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
258 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
266 !IF "$(USE_MULTI)" == "define"
267 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
269 !IF "$(USE_PERLIO)" == "define"
270 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
272 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
276 !IF "$(USE_PERLIO)" == "define"
277 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
280 !IF "$(USE_ITHREADS)" == "define"
281 ARCHNAME = $(ARCHNAME)-thread
284 # Visual Studio 98 specific
285 !IF "$(CCTYPE)" == "MSVC60"
287 # VC 6.0 can load the socket dll on demand. Makes the test suite
288 # run in about 10% less time.
289 DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
292 ARCHDIR = ..\lib\$(ARCHNAME)
293 COREDIR = ..\lib\CORE
294 AUTODIR = ..\lib\auto
298 EXTUTILSDIR = $(LIBDIR)\ExtUtils
301 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
302 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
303 INST_LIB = $(INST_TOP)$(INST_VER)\lib
304 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
305 INST_COREDIR = $(INST_ARCHLIB)\CORE
306 INST_POD = $(INST_LIB)\pod
307 INST_HTML = $(INST_TOP)$(INST_VER)\html
310 # Programs to compile, build .lib files and link
315 LIB32 = $(LINK32) -lib
322 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
323 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
324 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
325 LOCDEFS = -DPERLDLL -DPERL_CORE
329 !IF "$(USE_PERLCRT)" != "define"
338 !IF "$(CFG)" == "Debug"
339 ! IF "$(CCTYPE)" == "MSVC20"
340 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
342 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
346 OPTIMIZE = -MD -DNDEBUG
348 ! IF "$(WIN64)" == "define"
349 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
350 OPTIMIZE = $(OPTIMIZE) -Ox -GL
351 LINK_DBG = $(LINK_DBG) -ltcg
353 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
354 OPTIMIZE = $(OPTIMIZE) -O1
355 #OPTIMIZE = $(OPTIMIZE) -O2
359 !IF "$(WIN64)" == "define"
360 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
361 OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
364 !IF "$(USE_PERLCRT)" != "define"
365 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
368 LIBBASEFILES = $(CRYPT_LIB) \
369 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
370 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
371 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
374 # win64 doesn't have some libs
375 !IF "$(WIN64)" != "define"
376 LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
379 # we add LIBC here, since we may be using PerlCRT.dll
380 LIBFILES = $(LIBBASEFILES) $(LIBC)
382 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
383 $(PCHFLAGS) $(OPTIMIZE)
384 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
385 -libpath:"$(INST_COREDIR)" \
386 -machine:$(PROCESSOR_ARCHITECTURE)
390 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
392 #################### do not edit below this line #######################
393 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
401 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
404 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
410 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
411 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
419 # makedef.pl must be updated if this changes, and this should normally
420 # only change when there is an incompatible revision of the public API.
421 PERLIMPLIB = ..\perl59.lib
422 PERLDLL = ..\perl59.dll
424 MINIPERL = ..\miniperl.exe
426 PERLEXE = ..\perl.exe
427 WPERLEXE = ..\wperl.exe
428 GLOBEXE = ..\perlglob.exe
429 CONFIGPM = ..\lib\Config.pm
430 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
433 # Nominate a target which causes extensions to be re-built
434 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
435 # on and really only the interface - i.e. the .def file used to export symbols
437 PERLDEP = perldll.def
439 PL2BAT = bin\pl2bat.pl
440 GLOBBAT = bin\perlglob.bat
469 ..\lib\ExtUtils\xsubpp \
479 !IF "$(WIN64)" == "define"
480 CFGSH_TMPL = config.vc64
481 CFGH_TMPL = config_H.vc64
483 CFGSH_TMPL = config.vc
484 CFGH_TMPL = config_H.vc
487 XCOPY = xcopy /f /r /i /d
488 RCOPY = xcopy /f /r /i /e /d
495 # filenames given to xsubpp must have forward slashes (since it puts
496 # full pathnames in #line strings)
497 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
536 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
538 !IF "$(PERL_MALLOC)" == "define"
539 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
542 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
549 # We need this for miniperl build unless we override canned
550 # config.h #define building mini\*
551 #!IF "$(USE_PERLIO)" == "define"
552 WIN32_SRC = $(WIN32_SRC) .\win32io.c
555 !IF "$(CRYPT_SRC)" != ""
556 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
559 DLL_SRC = $(DYNALOADER).c
605 .\include\sys\socket.h \
608 CORE_H = $(CORE_NOCFG_H) .\config.h
610 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
611 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
612 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
613 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
614 $(MINIDIR)\miniperlmain$(o) \
615 $(MINIDIR)\perlio$(o)
616 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
617 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
618 DLL_OBJ = $(DLL_SRC:.c=.obj)
619 X2P_OBJ = $(X2P_SRC:.c=.obj)
621 PERLDLL_OBJ = $(CORE_OBJ)
622 PERLEXE_OBJ = perlmain$(o)
624 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
625 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
627 !IF "$(USE_SETARGV)" != ""
628 SETARGV_OBJ = setargv$(o)
631 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
632 SOCKET = $(EXTDIR)\Socket\Socket
633 FCNTL = $(EXTDIR)\Fcntl\Fcntl
634 OPCODE = $(EXTDIR)\Opcode\Opcode
635 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
637 POSIX = $(EXTDIR)\POSIX\POSIX
638 ATTRS = $(EXTDIR)\attrs\attrs
639 THREAD = $(EXTDIR)\Thread\Thread
642 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
643 ERRNO = $(EXTDIR)\Errno\Errno
644 PEEK = $(EXTDIR)\Devel\Peek\Peek
645 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
646 DPROF = $(EXTDIR)\Devel\DProf\DProf
647 GLOB = $(EXTDIR)\File\Glob\Glob
648 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
649 STORABLE = $(EXTDIR)\Storable\Storable
650 FILTER = $(EXTDIR)\Filter\Util\Call\Call
651 ENCODE = $(EXTDIR)\Encode\Encode
652 MD5 = $(EXTDIR)\Digest\MD5\MD5
653 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
654 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
655 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
656 CWD = $(EXTDIR)\Cwd\Cwd
657 LISTUTIL = $(EXTDIR)\List\Util\Util
658 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
659 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
660 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
661 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
663 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
664 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
665 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
666 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
667 IO_DLL = $(AUTODIR)\IO\IO.dll
668 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
669 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
670 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
671 B_DLL = $(AUTODIR)\B\B.dll
672 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
673 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
674 RE_DLL = $(AUTODIR)\re\re.dll
675 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
676 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
677 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
678 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
679 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
680 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
681 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
682 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
683 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
684 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
685 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
686 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
687 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
688 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
689 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
690 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
691 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
722 $(UNICODENORMALIZE).c
745 $(PERLIOSCALAR_DLL) \
753 $(UNICODENORMALIZE_DLL)
755 POD2HTML = $(PODDIR)\pod2html
756 POD2MAN = $(PODDIR)\pod2man
757 POD2LATEX = $(PODDIR)\pod2latex
758 POD2TEXT = $(PODDIR)\pod2text
761 "INST_DRV=$(INST_DRV)" \
762 "INST_TOP=$(INST_TOP)" \
763 "INST_VER=$(INST_VER)" \
764 "INST_ARCH=$(INST_ARCH)" \
765 "archname=$(ARCHNAME)" \
768 "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
769 "cf_email=$(EMAIL)" \
770 "d_crypt=$(D_CRYPT)" \
771 "d_mymalloc=$(PERL_MALLOC)" \
773 "incpath=$(CCINCDIR:"=\")" \
774 "libperl=$(PERLIMPLIB:..\=)" \
775 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
777 "make=$(MAKE_BARE)" \
778 "useithreads=$(USE_ITHREADS)" \
779 "usemultiplicity=$(USE_MULTI)" \
780 "useperlio=$(USE_PERLIO)" \
781 "uselargefiles=$(USE_LARGE_FILES)" \
782 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
783 "optimize=$(OPTIMIZE:"=\")"
789 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
791 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
793 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
795 #------------------------------------------------------------
797 $(GLOBEXE) : perlglob$(o)
798 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
799 perlglob$(o) setargv$(o)
801 perlglob$(o) : perlglob.c
803 config.w32 : $(CFGSH_TMPL)
804 copy $(CFGSH_TMPL) config.w32
806 .\config.h : $(CFGH_TMPL)
808 copy $(CFGH_TMPL) config.h
810 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
811 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
813 # this target is for when changes to the main config.sh happen
814 # edit config.{b,v,g}c and make this target once for each supported
815 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
817 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
819 -del /f perl.exe perl*.dll
824 -perl config_h.PL "INST_VER=$(INST_VER)"
825 rename config.h $(CFGH_TMPL)
827 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
831 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
832 $(XCOPY) ..\*.h $(COREDIR)\*.*
833 $(XCOPY) *.h $(COREDIR)\*.*
834 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
835 $(RCOPY) include $(COREDIR)\*.*
836 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
837 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
839 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
840 $(LINK32) -subsystem:console -out:$@ @<<
841 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
845 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
847 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
848 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
850 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
851 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
853 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
854 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
855 !IF "$(USE_IMP_SYS)" == "define"
856 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
857 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
860 # 1. we don't want to rebuild miniperl.exe when config.h changes
861 # 2. we don't want to rebuild miniperl.exe with non-default config.h
862 $(MINI_OBJ) : $(CORE_NOCFG_H)
864 $(WIN32_OBJ) : $(CORE_H)
865 $(CORE_OBJ) : $(CORE_H)
866 $(DLL_OBJ) : $(CORE_H)
867 $(X2P_OBJ) : $(CORE_H)
869 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
870 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
871 CCTYPE=$(CCTYPE) > perldll.def
873 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
874 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
875 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
877 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
879 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
881 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
884 ..\x2p\a2p$(o) : ..\x2p\a2p.c
885 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
887 ..\x2p\hash$(o) : ..\x2p\hash.c
888 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
890 ..\x2p\str$(o) : ..\x2p\str.c
891 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
893 ..\x2p\util$(o) : ..\x2p\util.c
894 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
896 ..\x2p\walk$(o) : ..\x2p\walk.c
897 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
899 $(X2P) : $(MINIPERL) $(X2P_OBJ)
900 $(MINIPERL) ..\x2p\find2perl.PL
901 $(MINIPERL) ..\x2p\s2p.PL
902 $(LINK32) -subsystem:console -out:$@ @<<
903 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
906 perlmain.c : runperl.c
907 copy runperl.c perlmain.c
909 perlmain$(o) : perlmain.c
910 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
912 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
913 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
914 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
915 copy $(PERLEXE) $(WPERLEXE)
916 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
918 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
920 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
921 if not exist $(AUTODIR) mkdir $(AUTODIR)
923 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
924 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
926 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
927 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
929 $(XSUBPP) dl_win32.xs > $(*B).c
932 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
933 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
935 #----------------------------------------------------------------------------------
936 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
937 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
940 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
942 #----------------------------------------------------------------------------------
945 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
946 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
947 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
949 utils: $(PERLEXE) $(X2P)
951 $(MAKE) PERL=$(MINIPERL)
953 copy ..\README.aix .\perlaix.pod
954 copy ..\README.amiga .\perlamiga.pod
955 copy ..\README.apollo .\perlapollo.pod
956 copy ..\README.beos .\perlbeos.pod
957 copy ..\README.bs2000 .\perlbs2000.pod
958 copy ..\README.ce .\perlce.pod
959 copy ..\README.cygwin .\perlcygwin.pod
960 copy ..\README.dgux .\perldgux.pod
961 copy ..\README.dos .\perldos.pod
962 copy ..\README.epoc .\perlepoc.pod
963 copy ..\README.freebsd .\perlfreebsd.pod
964 copy ..\README.hurd .\perlhurd.pod
965 copy ..\README.hpux .\perlhpux.pod
966 copy ..\README.irix .\perlirix.pod
967 copy ..\README.machten .\perlmachten.pod
968 copy ..\README.macos .\perlmacos.pod
969 copy ..\README.mint .\perlmint.pod
970 copy ..\README.mpeix .\perlmpeix.pod
971 copy ..\README.netware .\perlnetware.pod
972 copy ..\README.os2 .\perlos2.pod
973 copy ..\README.os390 .\perlos390.pod
974 copy ..\README.os400 .\perlos400.pod
975 copy ..\README.plan9 .\perlplan9.pod
976 copy ..\README.qnx .\perlqnx.pod
977 copy ..\README.solaris .\perlsolaris.pod
978 copy ..\README.tru64 .\perltru64.pod
979 copy ..\README.uts .\perluts.pod
980 copy ..\README.vmesa .\perlvmesa.pod
981 copy ..\vms\perlvms.pod .\perlvms.pod
982 copy ..\README.vos .\perlvos.pod
983 copy ..\README.win32 .\perlwin32.pod
984 $(MAKE) -f ..\win32\pod.mak converters
988 $(PERLEXE) $(PL2BAT) $(UTILS)
990 # the doubled rmdir calls are needed because older cmd shells
991 # don't understand /q
993 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
994 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
996 -del /f $(EXTENSION_DLL)
997 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
998 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
999 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1000 -del /f $(LIBDIR)\XSLoader.pm
1001 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1002 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1003 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1004 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1005 -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1006 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1007 -del /f $(LIBDIR)\File\Glob.pm
1008 -del /f $(LIBDIR)\Storable.pm
1009 -del /f $(LIBDIR)\Filter\Util\Call.pm
1010 -del /f $(LIBDIR)\Digest\MD5.pm
1011 -del /f $(LIBDIR)\PerlIO\scalar.pm
1012 -del /f $(LIBDIR)\PerlIO\via.pm
1013 -del /f $(LIBDIR)\MIME\Base64.pm
1014 -del /f $(LIBDIR)\MIME\QuotedPrint.pm
1015 -del /f $(LIBDIR)\List\Util.pm
1016 -del /f $(LIBDIR)\Scalar\Util.pm
1017 -del /f $(LIBDIR)\Time\HiRes.pm
1018 -del /f $(LIBDIR)\XS\APItest.pm
1019 -del /f $(LIBDIR)\XS\Typemap.pm
1020 -del /f $(LIBDIR)\Unicode\Normalize.pm
1021 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1022 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1023 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1024 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1025 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1026 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1027 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1028 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1029 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1030 -if exist $(LIBDIR)\Digest rmdir /s $(LIBDIR)\Digest
1031 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1032 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1033 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1034 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1035 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1036 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1037 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1038 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1040 -del /f *.html *.bat checkpods \
1041 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1042 perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
1043 perldos.pod perlepoc.pod perlfreebsd.pod perlhurd.pod \
1044 perlhpux.pod perlirix.pod perlmachten.pod \
1045 perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1046 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1047 perlqnx.pod perlsolaris.pod perltru64.pod perluts.pod \
1048 perlvmesa.pod perlvms.pod perlvos.pod \
1049 perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
1050 podchecker podselect
1052 -del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs perldoc perlivp \
1053 dprofpp perlcc libnetcfg enc2xs piconv cpan
1057 -del /f find2perl s2p psed
1060 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1064 -del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1067 -del /s *.def Makefile Makefile.old
1069 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1070 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1071 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1072 -if exist $(COREDIR) rmdir /s $(COREDIR)
1074 install : all installbare installhtml
1077 $(PERLEXE) ..\installperl
1078 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1079 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1080 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1083 $(RCOPY) html\*.* $(INST_HTML)\*.*
1085 inst_lib : $(CONFIGPM)
1086 copy splittree.pl ..
1087 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1088 $(RCOPY) ..\lib $(INST_LIB)\*.*
1090 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1091 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1092 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1096 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1099 test-prep : all utils
1100 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1101 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1102 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1106 $(PERLEXE) -I..\lib harness
1109 test-notty : test-prep
1110 set PERL_SKIP_TTY_TEST=1
1112 $(PERLEXE) -I..\lib harness
1115 test-wide : test-prep
1116 set HARNESS_PERL_SWITCHES=-C
1118 $(PERLEXE) -I..\lib harness
1121 test-wide-notty : test-prep
1122 set PERL_SKIP_TTY_TEST=1
1123 set HARNESS_PERL_SWITCHES=-C
1125 $(PERLEXE) -I..\lib harness
1129 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1130 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1131 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1133 $(PERLEXE) -I..\lib harness
1136 clean : Extensions_clean
1137 -@$(DEL) miniperlmain$(o)
1138 -@$(DEL) $(MINIPERL)
1139 -@$(DEL) perlglob$(o)
1140 -@$(DEL) perlmain$(o)
1145 -@$(DEL) $(WPERLEXE)
1147 -@$(DEL) $(CORE_OBJ)
1148 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1149 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1150 -@$(DEL) $(WIN32_OBJ)
1153 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1154 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1155 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1159 # Handy way to run perlbug -ok without having to install and run the
1160 # installed perlbug. We don't re-run the tests here - we trust the user.
1161 # Please *don't* use this unless all tests pass.
1162 # If you want to report test failures, use "nmake nok" instead.
1164 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1167 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1170 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1173 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok