2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools **experimental**
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual Studio 98)
99 # Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
101 # Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
105 # uncomment next line if you want debug version of perl (big,slow)
106 # If not enabled, we automatically try to use maximum optimization
107 # with all compilers that are known to have a working optimizer.
112 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
113 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
114 # This currently requires VC 5.0 with Service Pack 3 or later.
115 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
116 # and follow the directions in the package to install.
118 # Not recommended if you have VC 6.x and you're not running Windows 9x.
120 #USE_PERLCRT = define
123 # uncomment to enable linking with setargv.obj under the Visual C
124 # compiler. Setting this options enables perl to expand wildcards in
125 # arguments, but it may be harder to use alternate methods like
126 # File::DosGlob that are more powerful. This option is supported only with
129 #USE_SETARGV = define
132 # if you want to have the crypt() builtin function implemented, leave this or
133 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
134 # version of des_fcrypt().
139 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
140 # library, uncomment this, and make sure the library exists (see README.win32)
141 # Specify the full pathname of the library.
143 #CRYPT_LIB = fcrypt.lib
146 # set this if you wish to use perl's malloc
147 # WARNING: Turning this on/off WILL break binary compatibility with extensions
148 # you may have compiled with/without it. Be prepared to recompile all
149 # extensions if you change the default. Currently, this cannot be enabled
150 # if you ask for USE_IMP_SYS above.
152 #PERL_MALLOC = define
155 # set this to enable debugging mstats
156 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
157 # be enabled without PERL_MALLOC as well.
159 #DEBUG_MSTATS = define
163 # set the install locations of the compiler include/libraries
164 # Running VCVARS32.BAT is *required* when using Visual C.
165 # Some versions of Visual C don't define MSVCDIR in the environment,
166 # so you may have to set CCHOME explicitly (spaces in the path name should
171 CCINCDIR = $(CCHOME)\include
172 CCLIBDIR = $(CCHOME)\lib
175 # Additional compiler flags can be specified here.
177 BUILDOPT = $(BUILDOPTEXTRA)
180 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
181 # internal hash function unless the PERL_HASH_SEED environment variable is set.
182 # Alternatively, adding -DNO_HASH_SEED will completely disable the
183 # randomization feature.
184 # The latter is required to maintain binary compatibility with Perl 5.8.0.
186 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
187 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
190 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
191 # for old symbols by default, at the expense of extreme pollution. You most
192 # probably just want to build modules that won't compile with
193 # perl Makefile.PL POLLUTE=1
194 # instead of enabling this. Please report such modules to the respective
197 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
200 # This should normally be disabled. Enabling it will disable the File::Glob
201 # implementation of CORE::glob.
203 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
206 # This should normally be disabled. Enabling it causes perl to read scripts
207 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
209 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
212 # specify semicolon-separated list of extra directories that modules will
213 # look for libraries (spaces in path names need not be quoted)
218 # set this to your email address (perl will guess a value from
219 # from your loginname and your hostname, which may not be right)
224 ## Build configuration ends.
227 ##################### CHANGE THESE ONLY IF YOU MUST #####################
229 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
233 CRYPT_FLAG = -DHAVE_DES_FCRYPT
236 !IF "$(USE_IMP_SYS)" == "define"
241 !IF "$(PERL_MALLOC)" == ""
246 !IF "$(DEBUG_MSTATS)" == ""
250 !IF "$(DEBUG_MSTATS)" == "define"
251 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
254 !IF "$(USE_SITECUST)" == ""
258 !IF "$(USE_MULTI)" == ""
262 !IF "$(USE_ITHREADS)" == ""
266 !IF "$(USE_IMP_SYS)" == ""
270 !IF "$(USE_PERLIO)" == ""
274 !IF "$(USE_LARGE_FILES)" == ""
275 USE_LARGE_FILES = undef
278 !IF "$(USE_PERLCRT)" == ""
282 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
286 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
290 !IF "$(USE_SITECUST)" == "define"
291 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
294 !IF "$(USE_MULTI)" != "undef"
295 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
298 !IF "$(USE_IMP_SYS)" != "undef"
299 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
302 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
303 PROCESSOR_ARCHITECTURE = x86
307 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
308 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
311 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
319 !IF "$(USE_MULTI)" == "define"
320 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
322 !IF "$(USE_PERLIO)" == "define"
323 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
325 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
329 !IF "$(USE_PERLIO)" == "define"
330 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
333 !IF "$(USE_ITHREADS)" == "define"
334 ARCHNAME = $(ARCHNAME)-thread
337 # Visual Studio 98 and .NET 2003 specific
338 # VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
339 # about 10% less time. (The free version of 7.x can't do this, however.)
340 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70"
341 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
344 ARCHDIR = ..\lib\$(ARCHNAME)
345 COREDIR = ..\lib\CORE
346 AUTODIR = ..\lib\auto
350 EXTUTILSDIR = $(LIBDIR)\ExtUtils
353 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
354 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
355 INST_LIB = $(INST_TOP)$(INST_VER)\lib
356 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
357 INST_COREDIR = $(INST_ARCHLIB)\CORE
358 INST_POD = $(INST_LIB)\pod
359 INST_HTML = $(INST_TOP)$(INST_VER)\html
362 # Programs to compile, build .lib files and link
367 LIB32 = $(LINK32) -lib
374 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
375 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
376 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
377 LOCDEFS = -DPERLDLL -DPERL_CORE
381 !IF "$(USE_PERLCRT)" != "define"
387 !IF "$(CFG)" == "Debug"
388 ! IF "$(CCTYPE)" == "MSVC20"
389 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
391 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
395 OPTIMIZE = -MD -Zi -DNDEBUG
396 # we enable debug symbols in release builds also
397 LINK_DBG = -debug -opt:ref,icf
398 # you may want to enable this if you want COFF symbols in the executables
399 # in addition to the PDB symbols. The default Dr. Watson that ships with
400 # Windows can use the the former but not latter. The free WinDbg can be
401 # installed to get better stack traces from just the PDB symbols, so we
402 # avoid the bloat of COFF symbols by default.
403 #LINK_DBG = $(LINK_DBG) -debugtype:both
404 ! IF "$(WIN64)" == "define"
405 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
406 OPTIMIZE = $(OPTIMIZE) -Ox -GL
407 LINK_DBG = $(LINK_DBG) -ltcg
409 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
410 OPTIMIZE = $(OPTIMIZE) -O1
411 #OPTIMIZE = $(OPTIMIZE) -O2
415 !IF "$(WIN64)" == "define"
416 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
417 OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
420 # the string-pooling option -Gf is deprecated in VC++ 7.x and will be removed
421 # in later versions, so use read-only string-pooling (-GF) instead
422 !IF "$(CCTYPE)" == "MSVC70FREE" || "$(CCTYPE)" == "MSVC70"
428 !IF "$(USE_PERLCRT)" != "define"
429 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
432 LIBBASEFILES = $(CRYPT_LIB) \
433 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
434 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
435 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
438 # win64 doesn't have some libs
439 !IF "$(WIN64)" != "define"
440 LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
443 # we add LIBC here, since we may be using PerlCRT.dll
444 LIBFILES = $(LIBBASEFILES) $(LIBC)
446 EXTRACFLAGS = -nologo $(STRPOOL) -W3
447 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
448 $(PCHFLAGS) $(OPTIMIZE)
449 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
450 -libpath:"$(INST_COREDIR)" \
451 -machine:$(PROCESSOR_ARCHITECTURE)
455 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
457 #################### do not edit below this line #######################
458 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
466 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
469 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
475 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
476 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
484 # makedef.pl must be updated if this changes, and this should normally
485 # only change when there is an incompatible revision of the public API.
486 PERLIMPLIB = ..\perl59.lib
487 PERLDLL = ..\perl59.dll
489 MINIPERL = ..\miniperl.exe
491 PERLEXE = ..\perl.exe
492 WPERLEXE = ..\wperl.exe
493 GLOBEXE = ..\perlglob.exe
494 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
495 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
498 # Unicode data files generated by mktables
499 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
500 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
501 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
502 ..\lib\unicore\PVA.pl
504 # Directories of Unicode data files generated by mktables
505 UNIDATADIR1 = ..\lib\unicore\To
506 UNIDATADIR2 = ..\lib\unicore\lib
508 PERLEXE_ICO = .\perlexe.ico
509 PERLEXE_RES = .\perlexe.res
512 # Nominate a target which causes extensions to be re-built
513 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
514 # on and really only the interface - i.e. the .def file used to export symbols
516 PERLDEP = perldll.def
518 PL2BAT = bin\pl2bat.pl
519 GLOBBAT = bin\perlglob.bat
562 !IF "$(WIN64)" == "define"
563 CFGSH_TMPL = config.vc64
564 CFGH_TMPL = config_H.vc64
566 CFGSH_TMPL = config.vc
567 CFGH_TMPL = config_H.vc
570 XCOPY = xcopy /f /r /i /d
571 RCOPY = xcopy /f /r /i /e /d
578 # filenames given to xsubpp must have forward slashes (since it puts
579 # full pathnames in #line strings)
580 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
620 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
622 !IF "$(PERL_MALLOC)" == "define"
623 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
626 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
633 # We need this for miniperl build unless we override canned
634 # config.h #define building mini\*
635 #!IF "$(USE_PERLIO)" == "define"
636 WIN32_SRC = $(WIN32_SRC) .\win32io.c
639 !IF "$(CRYPT_SRC)" != ""
640 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
643 DLL_SRC = $(DYNALOADER).c
690 .\include\sys\socket.h \
693 CORE_H = $(CORE_NOCFG_H) .\config.h
695 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
696 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
697 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
698 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
699 $(MINIDIR)\miniperlmain$(o) \
700 $(MINIDIR)\perlio$(o)
701 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
702 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
703 DLL_OBJ = $(DLL_SRC:.c=.obj)
704 X2P_OBJ = $(X2P_SRC:.c=.obj)
706 PERLDLL_OBJ = $(CORE_OBJ)
707 PERLEXE_OBJ = perlmain$(o)
709 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
710 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
712 !IF "$(USE_SETARGV)" != ""
713 SETARGV_OBJ = setargv$(o)
716 # specify static extensions here
717 #STATIC_EXT = Cwd Compress/Zlib
720 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
721 SOCKET = $(EXTDIR)\Socket\Socket
722 FCNTL = $(EXTDIR)\Fcntl\Fcntl
723 OPCODE = $(EXTDIR)\Opcode\Opcode
724 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
726 POSIX = $(EXTDIR)\POSIX\POSIX
727 ATTRS = $(EXTDIR)\attrs\attrs
728 THREAD = $(EXTDIR)\Thread\Thread
731 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
732 ERRNO = $(EXTDIR)\Errno\Errno
733 PEEK = $(EXTDIR)\Devel\Peek\Peek
734 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
735 DPROF = $(EXTDIR)\Devel\DProf\DProf
736 GLOB = $(EXTDIR)\File\Glob\Glob
737 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
738 STORABLE = $(EXTDIR)\Storable\Storable
739 FILTER = $(EXTDIR)\Filter\Util\Call\Call
740 ENCODE = $(EXTDIR)\Encode\Encode
741 MD5 = $(EXTDIR)\Digest\MD5\MD5
742 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
743 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
744 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
745 CWD = $(EXTDIR)\Cwd\Cwd
746 LISTUTIL = $(EXTDIR)\List\Util\Util
747 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
748 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
749 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
750 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
751 MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
752 COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
753 WIN32_DIR = ext\Win32
755 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
756 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
757 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
758 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
759 IO_DLL = $(AUTODIR)\IO\IO.dll
760 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
761 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
762 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
763 B_DLL = $(AUTODIR)\B\B.dll
764 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
765 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
766 RE_DLL = $(AUTODIR)\re\re.dll
767 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
768 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
769 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
770 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
771 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
772 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
773 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
774 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
775 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
776 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
777 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
778 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
779 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
780 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
781 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
782 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
783 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
784 MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
785 COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
786 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
817 $(UNICODENORMALIZE).c \
818 $(MATHBIGINTFASTCALC).c \
843 $(PERLIOSCALAR_DLL) \
851 $(UNICODENORMALIZE_DLL) \
852 $(MATHBIGINTFASTCALC_DLL) \
853 $(COMPRESSZLIB_DLL) \
856 POD2HTML = $(PODDIR)\pod2html
857 POD2MAN = $(PODDIR)\pod2man
858 POD2LATEX = $(PODDIR)\pod2latex
859 POD2TEXT = $(PODDIR)\pod2text
862 "INST_DRV=$(INST_DRV)" \
863 "INST_TOP=$(INST_TOP)" \
864 "INST_VER=$(INST_VER)" \
865 "INST_ARCH=$(INST_ARCH)" \
866 "archname=$(ARCHNAME)" \
869 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
870 "cf_email=$(EMAIL)" \
871 "d_crypt=$(D_CRYPT)" \
872 "d_mymalloc=$(PERL_MALLOC)" \
874 "incpath=$(CCINCDIR:"=\")" \
875 "libperl=$(PERLIMPLIB:..\=)" \
876 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
878 "make=$(MAKE_BARE)" \
879 "static_ext=$(STATIC_EXT)" \
880 "usethreads=$(USE_ITHREADS)" \
881 "useithreads=$(USE_ITHREADS)" \
882 "usemultiplicity=$(USE_MULTI)" \
883 "useperlio=$(USE_PERLIO)" \
884 "uselargefiles=$(USE_LARGE_FILES)" \
885 "usesitecustomize=$(USE_SITECUST)" \
886 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
887 "optimize=$(OPTIMIZE:"=\")"
893 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
895 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
897 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
899 #------------------------------------------------------------
901 $(GLOBEXE) : perlglob$(o)
902 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
903 perlglob$(o) setargv$(o)
905 perlglob$(o) : perlglob.c
907 config.w32 : $(CFGSH_TMPL)
908 copy $(CFGSH_TMPL) config.w32
910 .\config.h : $(CFGH_TMPL)
912 copy $(CFGH_TMPL) config.h
914 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
915 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
917 # this target is for when changes to the main config.sh happen
918 # edit config.{b,v,g}c and make this target once for each supported
919 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
921 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
923 -del /f perl.exe perl*.dll
928 -perl config_h.PL "INST_VER=$(INST_VER)"
929 rename config.h $(CFGH_TMPL)
931 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
935 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
936 $(XCOPY) ..\*.h $(COREDIR)\*.*
937 $(XCOPY) *.h $(COREDIR)\*.*
938 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
939 $(RCOPY) include $(COREDIR)\*.*
940 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
941 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
943 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
944 $(LINK32) -subsystem:console -out:$@ @<<
945 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
949 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
951 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
952 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
954 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
955 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
957 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
958 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
959 !IF "$(USE_IMP_SYS)" == "define"
960 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
961 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
964 # 1. we don't want to rebuild miniperl.exe when config.h changes
965 # 2. we don't want to rebuild miniperl.exe with non-default config.h
966 $(MINI_OBJ) : $(CORE_NOCFG_H)
968 $(WIN32_OBJ) : $(CORE_H)
969 $(CORE_OBJ) : $(CORE_H)
970 $(DLL_OBJ) : $(CORE_H)
971 $(X2P_OBJ) : $(CORE_H)
973 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
974 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
975 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
976 CCTYPE=$(CCTYPE) > perldll.def
978 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
979 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
980 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
982 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
984 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
985 $(MINIPERL) makeico.pl > $@
987 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
989 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
991 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
994 ..\x2p\a2p$(o) : ..\x2p\a2p.c
995 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
997 ..\x2p\hash$(o) : ..\x2p\hash.c
998 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1000 ..\x2p\str$(o) : ..\x2p\str.c
1001 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1003 ..\x2p\util$(o) : ..\x2p\util.c
1004 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1006 ..\x2p\walk$(o) : ..\x2p\walk.c
1007 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1009 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1010 $(MINIPERL) ..\x2p\find2perl.PL
1011 $(MINIPERL) ..\x2p\s2p.PL
1012 $(LINK32) -subsystem:console -out:$@ @<<
1013 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1016 perlmain.c : runperl.c
1017 copy runperl.c perlmain.c
1019 perlmain$(o) : perlmain.c
1020 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1022 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1023 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1024 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1025 copy $(PERLEXE) $(WPERLEXE)
1026 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1027 copy splittree.pl ..
1028 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1030 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1031 if not exist $(AUTODIR) mkdir $(AUTODIR)
1033 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1034 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1036 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1037 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1039 $(XSUBPP) dl_win32.xs > $(*B).c
1042 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1043 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1045 #-------------------------------------------------------------------------------
1046 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1047 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1048 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1050 Extensions_static : buildext.pl
1051 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1052 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1053 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1056 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1057 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1059 Extensions_realclean:
1060 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1061 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1063 #-------------------------------------------------------------------------------
1066 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1067 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1068 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1070 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1071 # so please check that script before making structural changes here
1073 utils: $(PERLEXE) $(X2P)
1075 $(MAKE) PERL=$(MINIPERL)
1077 copy ..\vms\perlvms.pod .\perlvms.pod
1078 copy ..\README.aix ..\pod\perlaix.pod
1079 copy ..\README.amiga ..\pod\perlamiga.pod
1080 copy ..\README.apollo ..\pod\perlapollo.pod
1081 copy ..\README.beos ..\pod\perlbeos.pod
1082 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1083 copy ..\README.ce ..\pod\perlce.pod
1084 copy ..\README.cn ..\pod\perlcn.pod
1085 copy ..\README.cygwin ..\pod\perlcygwin.pod
1086 copy ..\README.dgux ..\pod\perldgux.pod
1087 copy ..\README.dos ..\pod\perldos.pod
1088 copy ..\README.epoc ..\pod\perlepoc.pod
1089 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1090 copy ..\README.hpux ..\pod\perlhpux.pod
1091 copy ..\README.hurd ..\pod\perlhurd.pod
1092 copy ..\README.irix ..\pod\perlirix.pod
1093 copy ..\README.jp ..\pod\perljp.pod
1094 copy ..\README.ko ..\pod\perlko.pod
1095 copy ..\README.machten ..\pod\perlmachten.pod
1096 copy ..\README.macos ..\pod\perlmacos.pod
1097 copy ..\README.macosx ..\pod\perlmacosx.pod
1098 copy ..\README.mint ..\pod\perlmint.pod
1099 copy ..\README.mpeix ..\pod\perlmpeix.pod
1100 copy ..\README.netware ..\pod\perlnetware.pod
1101 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1102 copy ..\README.os2 ..\pod\perlos2.pod
1103 copy ..\README.os390 ..\pod\perlos390.pod
1104 copy ..\README.os400 ..\pod\perlos400.pod
1105 copy ..\README.plan9 ..\pod\perlplan9.pod
1106 copy ..\README.qnx ..\pod\perlqnx.pod
1107 copy ..\README.solaris ..\pod\perlsolaris.pod
1108 copy ..\README.symbian ..\pod\perlsymbian.pod
1109 copy ..\README.tru64 ..\pod\perltru64.pod
1110 copy ..\README.tw ..\pod\perltw.pod
1111 copy ..\README.uts ..\pod\perluts.pod
1112 copy ..\README.vmesa ..\pod\perlvmesa.pod
1113 copy ..\README.vms ..\pod\perlvms.pod
1114 copy ..\README.vos ..\pod\perlvos.pod
1115 copy ..\README.win32 ..\pod\perlwin32.pod
1116 copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
1117 $(MAKE) -f ..\win32\pod.mak converters
1119 $(PERLEXE) lib_pm.PL
1121 $(PERLEXE) $(PL2BAT) $(UTILS)
1123 # Note that the pod cleanup in this next section is parsed (and regenerated
1124 # by pod/buildtoc so please check that script before making changes here
1126 # the doubled rmdir calls are needed because older cmd shells
1127 # don't understand /q
1128 distclean: realclean
1129 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1130 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1132 -del /f $(EXTENSION_DLL)
1133 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1134 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1135 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1136 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1137 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1138 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1139 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1140 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1141 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1142 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1143 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1144 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1145 -del /f $(LIBDIR)\ByteLoader.pm
1146 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1147 -del /f $(LIBDIR)\Devel\PPPort.pm
1148 -del /f $(LIBDIR)\File\Glob.pm
1149 -del /f $(LIBDIR)\Storable.pm
1150 -del /f $(LIBDIR)\Digest\MD5.pm
1151 -del /f $(LIBDIR)\PerlIO\encoding.pm
1152 -del /f $(LIBDIR)\PerlIO\scalar.pm
1153 -del /f $(LIBDIR)\PerlIO\via.pm
1154 -del /f $(LIBDIR)\Sys\Hostname.pm
1155 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1156 -del /f $(LIBDIR)\threads\shared.pm
1157 -del /f $(LIBDIR)\Time\HiRes.pm
1158 -del /f $(LIBDIR)\Unicode\Normalize.pm
1159 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1160 -del /f $(LIBDIR)\Win32.pm
1161 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1162 -if exist $(LIBDIR)\IO\Socket rmdir /s $(LIBDIR)\IO\Socket
1163 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1164 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1165 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1166 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1167 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1168 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1169 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1170 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1171 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1172 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1173 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1174 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1175 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1176 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1177 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1178 -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
1179 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1180 -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
1181 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1182 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1183 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1184 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1185 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1186 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1187 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1188 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1189 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1190 perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
1191 perlplan9.pod perlqnx.pod perlsolaris.pod perlsymbian.pod \
1192 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
1193 perlvms.pod perlvos.pod perlwin32.pod \
1194 pod2html pod2latex pod2man pod2text pod2usage \
1195 podchecker podselect
1196 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1197 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1198 xsubpp instmodsh prove ptar corelist
1199 -cd ..\x2p && del /f find2perl s2p psed *.bat
1200 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1204 -del /f $(PERLEXE_ICO) perl.base
1205 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1206 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1207 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1208 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1209 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1210 -if exist $(COREDIR) rmdir /s $(COREDIR)
1212 install : all installbare installhtml
1215 $(PERLEXE) ..\installperl
1216 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1217 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1218 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1219 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1220 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1223 $(RCOPY) html\*.* $(INST_HTML)\*.*
1225 inst_lib : $(CONFIGPM)
1226 copy splittree.pl ..
1227 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1228 $(RCOPY) ..\lib $(INST_LIB)\*.*
1230 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1231 cd ..\lib\unicore && \
1232 ..\$(MINIPERL) -I.. mktables
1234 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1235 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1236 if exist ..\t\perl.exe del /f ..\t\perl.exe
1237 rename ..\t\miniperl.exe perl.exe
1238 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1241 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1243 test-prep : all utils
1244 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1245 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1246 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1250 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1253 test-notty : test-prep
1254 set PERL_SKIP_TTY_TEST=1
1256 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1260 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1261 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1262 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1264 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1267 # the doubled rmdir calls are needed because older cmd shells
1268 # don't understand /q
1270 -@$(DEL) miniperlmain$(o)
1271 -@$(DEL) $(MINIPERL)
1272 -@$(DEL) perlglob$(o)
1273 -@$(DEL) perlmain$(o)
1278 -@$(DEL) $(WPERLEXE)
1280 -@$(DEL) $(CORE_OBJ)
1281 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1282 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1283 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1284 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1285 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1286 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1287 -@$(DEL) $(UNIDATAFILES)
1288 -@$(DEL) $(WIN32_OBJ)
1291 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1292 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1293 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1296 -@$(DEL) Extensions_static
1298 clean : Extensions_clean _clean
1300 realclean : Extensions_realclean _clean
1302 # Handy way to run perlbug -ok without having to install and run the
1303 # installed perlbug. We don't re-run the tests here - we trust the user.
1304 # Please *don't* use this unless all tests pass.
1305 # If you want to report test failures, use "nmake nok" instead.
1307 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1310 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1313 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1316 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok