2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual C++ 98)
99 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
101 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
103 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
105 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # uncomment next line if you want debug version of perl (big,slow)
110 # If not enabled, we automatically try to use maximum optimization
111 # with all compilers that are known to have a working optimizer.
116 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
117 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
118 # This currently requires VC 5.0 with Service Pack 3 or later.
119 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
120 # and follow the directions in the package to install.
122 # Not recommended if you have VC 6.x and you're not running Windows 9x.
124 #USE_PERLCRT = define
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # if you want to have the crypt() builtin function implemented, leave this or
137 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
138 # version of des_fcrypt().
143 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
144 # library, uncomment this, and make sure the library exists (see README.win32)
145 # Specify the full pathname of the library.
147 #CRYPT_LIB = fcrypt.lib
150 # set this if you wish to use perl's malloc
151 # WARNING: Turning this on/off WILL break binary compatibility with extensions
152 # you may have compiled with/without it. Be prepared to recompile all
153 # extensions if you change the default. Currently, this cannot be enabled
154 # if you ask for USE_IMP_SYS above.
156 #PERL_MALLOC = define
159 # set this to enable debugging mstats
160 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
161 # be enabled without PERL_MALLOC as well.
163 #DEBUG_MSTATS = define
167 # set the install locations of the compiler include/libraries
168 # Running VCVARS32.BAT is *required* when using Visual C.
169 # Some versions of Visual C don't define MSVCDIR in the environment,
170 # so you may have to set CCHOME explicitly (spaces in the path name should
175 CCINCDIR = $(CCHOME)\include
176 CCLIBDIR = $(CCHOME)\lib
179 # Additional compiler flags can be specified here.
181 BUILDOPT = $(BUILDOPTEXTRA)
184 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
185 # internal hash function unless the PERL_HASH_SEED environment variable is set.
186 # Alternatively, adding -DNO_HASH_SEED will completely disable the
187 # randomization feature.
188 # The latter is required to maintain binary compatibility with Perl 5.8.0.
190 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
191 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
194 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
195 # for old symbols by default, at the expense of extreme pollution. You most
196 # probably just want to build modules that won't compile with
197 # perl Makefile.PL POLLUTE=1
198 # instead of enabling this. Please report such modules to the respective
201 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
204 # This should normally be disabled. Enabling it will disable the File::Glob
205 # implementation of CORE::glob.
207 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
210 # This should normally be disabled. Enabling it causes perl to read scripts
211 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
213 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
216 # specify semicolon-separated list of extra directories that modules will
217 # look for libraries (spaces in path names need not be quoted)
222 # set this to your email address (perl will guess a value from
223 # from your loginname and your hostname, which may not be right)
228 ## Build configuration ends.
231 ##################### CHANGE THESE ONLY IF YOU MUST #####################
233 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
237 CRYPT_FLAG = -DHAVE_DES_FCRYPT
240 !IF "$(USE_IMP_SYS)" == "define"
245 !IF "$(PERL_MALLOC)" == ""
250 !IF "$(DEBUG_MSTATS)" == ""
254 !IF "$(DEBUG_MSTATS)" == "define"
255 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
258 !IF "$(USE_SITECUST)" == ""
262 !IF "$(USE_MULTI)" == ""
266 !IF "$(USE_ITHREADS)" == ""
270 !IF "$(USE_IMP_SYS)" == ""
274 !IF "$(USE_PERLIO)" == ""
278 !IF "$(USE_LARGE_FILES)" == ""
279 USE_LARGE_FILES = undef
282 !IF "$(USE_PERLCRT)" == ""
286 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
290 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
294 !IF "$(USE_SITECUST)" == "define"
295 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
298 !IF "$(USE_MULTI)" != "undef"
299 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
302 !IF "$(USE_IMP_SYS)" != "undef"
303 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
306 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
307 PROCESSOR_ARCHITECTURE = x86
311 # When we are running from a 32bit cmd.exe on AMD64 then
312 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
314 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
315 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
318 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
326 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
327 !IF "$(ARCHITECTURE)" == "AMD64"
330 !IF "$(ARCHITECTURE)" == "IA64"
334 !IF "$(USE_MULTI)" == "define"
335 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
337 !IF "$(USE_PERLIO)" == "define"
338 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
340 ARCHNAME = MSWin32-$(ARCHITECTURE)
344 !IF "$(USE_PERLIO)" == "define"
345 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
348 !IF "$(USE_ITHREADS)" == "define"
349 ARCHNAME = $(ARCHNAME)-thread
352 # Visual C++ 98, .NET 2003 and 2005 specific.
353 # VC++ 6.x, 7.x and 8.x can load DLL's on demand. Makes the test suite run in
354 # about 10% less time. (The free version of 7.x can't do this, but the free
355 # version of 8.x can.)
356 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
357 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
358 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
361 ARCHDIR = ..\lib\$(ARCHNAME)
362 COREDIR = ..\lib\CORE
363 AUTODIR = ..\lib\auto
367 EXTUTILSDIR = $(LIBDIR)\ExtUtils
371 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
372 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
373 INST_LIB = $(INST_TOP)$(INST_VER)\lib
374 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
375 INST_COREDIR = $(INST_ARCHLIB)\CORE
376 INST_HTML = $(INST_TOP)$(INST_VER)\html
379 # Programs to compile, build .lib files and link
384 LIB32 = $(LINK32) -lib
391 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
392 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
393 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
394 LOCDEFS = -DPERLDLL -DPERL_CORE
398 !IF "$(USE_PERLCRT)" != "define"
404 !IF "$(CFG)" == "Debug"
405 ! IF "$(CCTYPE)" == "MSVC20"
406 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
408 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
412 OPTIMIZE = -MD -Zi -DNDEBUG
413 # we enable debug symbols in release builds also
414 LINK_DBG = -debug -opt:ref,icf
415 # you may want to enable this if you want COFF symbols in the executables
416 # in addition to the PDB symbols. The default Dr. Watson that ships with
417 # Windows can use the the former but not latter. The free WinDbg can be
418 # installed to get better stack traces from just the PDB symbols, so we
419 # avoid the bloat of COFF symbols by default.
420 #LINK_DBG = $(LINK_DBG) -debugtype:both
421 ! IF "$(WIN64)" == "define"
422 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
423 OPTIMIZE = $(OPTIMIZE) -Ox -GL
424 LINK_DBG = $(LINK_DBG) -ltcg
426 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
427 OPTIMIZE = $(OPTIMIZE) -O1
428 #OPTIMIZE = $(OPTIMIZE) -O2
432 !IF "$(WIN64)" == "define"
433 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
434 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
437 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
438 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
439 # do not require the fix.
440 !IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
441 ! IF "$(USE_PERLCRT)" != "define"
442 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
446 LIBBASEFILES = $(CRYPT_LIB) \
447 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
448 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
449 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
450 version.lib odbc32.lib odbccp32.lib
452 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
453 # include the buffer overrun verification code used by the /GS switch.
454 # Since the code links against libraries that are compiled with /GS, this
455 # "security cookie verification" must be included via bufferoverlow.lib.
456 !IF "$(WIN64)" == "define"
457 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
460 # we add LIBC here, since we may be using PerlCRT.dll
461 LIBFILES = $(LIBBASEFILES) $(LIBC)
463 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
464 EXTRACFLAGS = -nologo -GF -W3
465 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
466 $(PCHFLAGS) $(OPTIMIZE)
467 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
468 -libpath:"$(INST_COREDIR)" \
469 -machine:$(PROCESSOR_ARCHITECTURE)
473 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
475 #################### do not edit below this line #######################
476 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
484 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
487 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
493 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
494 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
503 # makedef.pl must be updated if this changes, and this should normally
504 # only change when there is an incompatible revision of the public API.
505 PERLIMPLIB = ..\perl59.lib
506 PERLDLL = ..\perl59.dll
508 MINIPERL = ..\miniperl.exe
510 PERLEXE = ..\perl.exe
511 WPERLEXE = ..\wperl.exe
512 GLOBEXE = ..\perlglob.exe
513 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
514 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
517 # Unicode data files generated by mktables
518 FIRSTUNIFILE = ..\lib\unicore\Canonical.pl
519 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
520 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
521 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
522 ..\lib\unicore\PVA.pl
524 # Directories of Unicode data files generated by mktables
525 UNIDATADIR1 = ..\lib\unicore\To
526 UNIDATADIR2 = ..\lib\unicore\lib
528 PERLEXE_ICO = .\perlexe.ico
529 PERLEXE_RES = .\perlexe.res
532 # Nominate a target which causes extensions to be re-built
533 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
534 # on and really only the interface - i.e. the .def file used to export symbols
536 PERLDEP = perldll.def
538 PL2BAT = bin\pl2bat.pl
539 GLOBBAT = bin\perlglob.bat
555 ..\utils\config_data \
584 !IF "$(WIN64)" == "define"
585 CFGSH_TMPL = config.vc64
586 CFGH_TMPL = config_H.vc64
588 CFGSH_TMPL = config.vc
589 CFGH_TMPL = config_H.vc
592 XCOPY = xcopy /f /r /i /d /y
593 RCOPY = xcopy /f /r /i /e /d /y
600 # filenames given to xsubpp must have forward slashes (since it puts
601 # full pathnames in #line strings)
602 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
642 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
644 !IF "$(PERL_MALLOC)" == "define"
645 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
648 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
655 # We need this for miniperl build unless we override canned
656 # config.h #define building mini\*
657 #!IF "$(USE_PERLIO)" == "define"
658 WIN32_SRC = $(WIN32_SRC) .\win32io.c
661 !IF "$(CRYPT_SRC)" != ""
662 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
665 DLL_SRC = $(DYNALOADER).c
712 .\include\sys\socket.h \
715 CORE_H = $(CORE_NOCFG_H) .\config.h
717 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
718 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
719 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
720 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
721 $(MINIDIR)\miniperlmain$(o) \
722 $(MINIDIR)\perlio$(o)
723 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
724 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
725 DLL_OBJ = $(DLL_SRC:.c=.obj)
726 X2P_OBJ = $(X2P_SRC:.c=.obj)
728 PERLDLL_OBJ = $(CORE_OBJ)
729 PERLEXE_OBJ = perlmain$(o)
731 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
732 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
734 !IF "$(USE_SETARGV)" != ""
735 SETARGV_OBJ = setargv$(o)
738 # specify static extensions here
739 #STATIC_EXT = Cwd Compress/Zlib
742 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
743 SOCKET = $(EXTDIR)\Socket\Socket
744 FCNTL = $(EXTDIR)\Fcntl\Fcntl
745 OPCODE = $(EXTDIR)\Opcode\Opcode
746 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
748 POSIX = $(EXTDIR)\POSIX\POSIX
749 ATTRS = $(EXTDIR)\attrs\attrs
750 THREAD = $(EXTDIR)\Thread\Thread
753 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
754 ERRNO = $(EXTDIR)\Errno\Errno
755 PEEK = $(EXTDIR)\Devel\Peek\Peek
756 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
757 DPROF = $(EXTDIR)\Devel\DProf\DProf
758 GLOB = $(EXTDIR)\File\Glob\Glob
759 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
760 STORABLE = $(EXTDIR)\Storable\Storable
761 FILTER = $(EXTDIR)\Filter\Util\Call\Call
762 ENCODE = $(EXTDIR)\Encode\Encode
763 MD5 = $(EXTDIR)\Digest\MD5\MD5
764 SHA = $(EXTDIR)\Digest\SHA\SHA
765 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
766 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
767 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
768 CWD = $(EXTDIR)\Cwd\Cwd
769 LISTUTIL = $(EXTDIR)\List\Util\Util
770 HASHUTIL = $(EXTDIR)\Hash\Util\Util
771 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
772 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
773 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
774 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
775 MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
776 COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
777 WIN32_DIR = ext\Win32
778 WIN32APIFILE = ext\Win32API\File\File
780 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
781 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
782 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
783 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
784 IO_DLL = $(AUTODIR)\IO\IO.dll
785 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
786 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
787 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
788 B_DLL = $(AUTODIR)\B\B.dll
789 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
790 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
791 RE_DLL = $(AUTODIR)\re\re.dll
792 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
793 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
794 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
795 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
796 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
797 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
798 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
799 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
800 SHA_DLL = $(AUTODIR)\Digest\SHA\SHA.dll
801 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
802 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
803 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
804 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
805 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
806 HASHUTIL_DLL = $(AUTODIR)\HASH\Util\Util.dll
807 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
808 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
809 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
810 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
811 MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
812 COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
813 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
814 WIN32APIFILE_DLL = $(AUTODIR)\Win32API\File\File.dll
847 $(UNICODENORMALIZE).c \
848 $(MATHBIGINTFASTCALC).c \
875 $(PERLIOSCALAR_DLL) \
884 $(UNICODENORMALIZE_DLL) \
885 $(MATHBIGINTFASTCALC_DLL) \
886 $(COMPRESSZLIB_DLL) \
891 "INST_DRV=$(INST_DRV)" \
892 "INST_TOP=$(INST_TOP)" \
893 "INST_VER=$(INST_VER)" \
894 "INST_ARCH=$(INST_ARCH)" \
895 "archname=$(ARCHNAME)" \
898 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
899 "cf_email=$(EMAIL)" \
900 "d_crypt=$(D_CRYPT)" \
901 "d_mymalloc=$(PERL_MALLOC)" \
903 "incpath=$(CCINCDIR:"=\")" \
904 "libperl=$(PERLIMPLIB:..\=)" \
905 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
907 "make=$(MAKE_BARE)" \
908 "static_ext=$(STATIC_EXT)" \
909 "usethreads=$(USE_ITHREADS)" \
910 "useithreads=$(USE_ITHREADS)" \
911 "usemultiplicity=$(USE_MULTI)" \
912 "useperlio=$(USE_PERLIO)" \
913 "uselargefiles=$(USE_LARGE_FILES)" \
914 "usesitecustomize=$(USE_SITECUST)" \
915 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
916 "optimize=$(OPTIMIZE:"=\")"
922 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
923 $(X2P) MakePPPort Extensions
924 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
926 ..\regnodes.h : ..\regcomp.sym
931 regnodes : ..\regnodes.h
933 reonly : regnodes .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
934 $(X2P) Extensions_reonly
935 @echo Perl and 're' are up to date.
937 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
939 #------------------------------------------------------------
941 $(GLOBEXE) : perlglob$(o)
942 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
943 perlglob$(o) setargv$(o)
945 perlglob$(o) : perlglob.c
947 config.w32 : $(CFGSH_TMPL)
948 copy $(CFGSH_TMPL) config.w32
950 .\config.h : $(CFGH_TMPL)
952 copy $(CFGH_TMPL) config.h
954 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
955 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
957 # this target is for when changes to the main config.sh happen
958 # edit config.{b,v,g}c and make this target once for each supported
959 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
961 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
963 -del /f perl.exe perl*.dll
968 -perl config_h.PL "INST_VER=$(INST_VER)"
969 rename config.h $(CFGH_TMPL)
971 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
975 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
976 $(XCOPY) ..\*.h $(COREDIR)\*.*
977 $(XCOPY) *.h $(COREDIR)\*.*
978 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
979 $(RCOPY) include $(COREDIR)\*.*
980 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
981 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
983 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
984 $(LINK32) -subsystem:console -out:$@ @<<
985 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
989 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
991 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
992 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
994 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
995 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
997 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
998 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
999 !IF "$(USE_IMP_SYS)" == "define"
1000 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1001 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1004 # 1. we don't want to rebuild miniperl.exe when config.h changes
1005 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1006 $(MINI_OBJ) : $(CORE_NOCFG_H)
1008 $(WIN32_OBJ) : $(CORE_H)
1009 $(CORE_OBJ) : $(CORE_H)
1010 $(DLL_OBJ) : $(CORE_H)
1011 $(X2P_OBJ) : $(CORE_H)
1013 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1014 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1015 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
1016 CCTYPE=$(CCTYPE) > perldll.def
1018 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1019 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
1020 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
1022 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1024 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1025 $(MINIPERL) makeico.pl > $@
1027 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1029 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1031 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1034 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1035 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1037 ..\x2p\hash$(o) : ..\x2p\hash.c
1038 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1040 ..\x2p\str$(o) : ..\x2p\str.c
1041 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1043 ..\x2p\util$(o) : ..\x2p\util.c
1044 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1046 ..\x2p\walk$(o) : ..\x2p\walk.c
1047 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1049 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1050 $(MINIPERL) ..\x2p\find2perl.PL
1051 $(MINIPERL) ..\x2p\s2p.PL
1052 $(LINK32) -subsystem:console -out:$@ @<<
1053 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1056 perlmain.c : runperl.c
1057 copy runperl.c perlmain.c
1059 perlmain$(o) : perlmain.c
1060 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1062 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1063 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1064 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1065 copy $(PERLEXE) $(WPERLEXE)
1066 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1067 copy splittree.pl ..
1068 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1070 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1071 if not exist $(AUTODIR) mkdir $(AUTODIR)
1073 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1074 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1076 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1077 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1079 $(XSUBPP) dl_win32.xs > $(*B).c
1082 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1083 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1085 MakePPPort: $(MINIPERL) $(CONFIGPM)
1086 $(MINIPERL) -I..\lib ..\mkppport
1089 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1091 #-------------------------------------------------------------------------------
1092 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1093 $(XCOPY) ..\*.h $(COREDIR)\*.*
1094 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1095 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1097 Extensions_reonly: buildext.pl $(PERLDEP) $(CONFIGPM)
1098 $(XCOPY) ..\*.h $(COREDIR)\*.*
1099 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1100 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1102 Extensions_static : buildext.pl
1103 $(XCOPY) ..\*.h $(COREDIR)\*.*
1104 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1105 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1106 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1109 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1110 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1112 Extensions_realclean:
1113 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1114 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1116 #-------------------------------------------------------------------------------
1119 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1120 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1121 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1123 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1124 # so please check that script before making structural changes here
1126 utils: $(PERLEXE) $(X2P)
1128 $(MAKE) PERL=$(MINIPERL)
1130 copy ..\vms\perlvms.pod .\perlvms.pod
1131 copy ..\README.aix ..\pod\perlaix.pod
1132 copy ..\README.amiga ..\pod\perlamiga.pod
1133 copy ..\README.apollo ..\pod\perlapollo.pod
1134 copy ..\README.beos ..\pod\perlbeos.pod
1135 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1136 copy ..\README.ce ..\pod\perlce.pod
1137 copy ..\README.cn ..\pod\perlcn.pod
1138 copy ..\README.cygwin ..\pod\perlcygwin.pod
1139 copy ..\README.dgux ..\pod\perldgux.pod
1140 copy ..\README.dos ..\pod\perldos.pod
1141 copy ..\README.epoc ..\pod\perlepoc.pod
1142 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1143 copy ..\README.hpux ..\pod\perlhpux.pod
1144 copy ..\README.hurd ..\pod\perlhurd.pod
1145 copy ..\README.irix ..\pod\perlirix.pod
1146 copy ..\README.jp ..\pod\perljp.pod
1147 copy ..\README.ko ..\pod\perlko.pod
1148 copy ..\README.linux ..\pod\perllinux.pod
1149 copy ..\README.machten ..\pod\perlmachten.pod
1150 copy ..\README.macos ..\pod\perlmacos.pod
1151 copy ..\README.macosx ..\pod\perlmacosx.pod
1152 copy ..\README.mint ..\pod\perlmint.pod
1153 copy ..\README.mpeix ..\pod\perlmpeix.pod
1154 copy ..\README.netware ..\pod\perlnetware.pod
1155 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1156 copy ..\README.os2 ..\pod\perlos2.pod
1157 copy ..\README.os390 ..\pod\perlos390.pod
1158 copy ..\README.os400 ..\pod\perlos400.pod
1159 copy ..\README.plan9 ..\pod\perlplan9.pod
1160 copy ..\README.qnx ..\pod\perlqnx.pod
1161 copy ..\README.riscos ..\pod\perlriscos.pod
1162 copy ..\README.solaris ..\pod\perlsolaris.pod
1163 copy ..\README.symbian ..\pod\perlsymbian.pod
1164 copy ..\README.tru64 ..\pod\perltru64.pod
1165 copy ..\README.tw ..\pod\perltw.pod
1166 copy ..\README.uts ..\pod\perluts.pod
1167 copy ..\README.vmesa ..\pod\perlvmesa.pod
1168 copy ..\README.vms ..\pod\perlvms.pod
1169 copy ..\README.vos ..\pod\perlvos.pod
1170 copy ..\README.win32 ..\pod\perlwin32.pod
1171 copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
1172 $(MAKE) -f ..\win32\pod.mak converters
1174 $(PERLEXE) lib_pm.PL
1176 $(PERLEXE) $(PL2BAT) $(UTILS)
1178 # Note that the pod cleanup in this next section is parsed (and regenerated
1179 # by pod/buildtoc so please check that script before making changes here
1181 distclean: realclean
1182 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1183 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1185 -del /f $(EXTENSION_DLL)
1186 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1187 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1188 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1189 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1190 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1191 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1192 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1193 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1194 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1195 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1196 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1197 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1198 -del /f $(LIBDIR)\ByteLoader.pm
1199 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1200 -del /f $(LIBDIR)\Devel\PPPort.pm
1201 -del /f $(LIBDIR)\File\Glob.pm
1202 -del /f $(LIBDIR)\Storable.pm
1203 -del /f $(LIBDIR)\Digest\MD5.pm
1204 -del /f $(LIBDIR)\Digest\SHA.pm
1205 -del /f $(LIBDIR)\PerlIO\encoding.pm
1206 -del /f $(LIBDIR)\PerlIO\scalar.pm
1207 -del /f $(LIBDIR)\PerlIO\via.pm
1208 -del /f $(LIBDIR)\Sys\Hostname.pm
1209 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1210 -del /f $(LIBDIR)\threads\shared.pm
1211 -del /f $(LIBDIR)\Time\HiRes.pm
1212 -del /f $(LIBDIR)\Unicode\Normalize.pm
1213 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1214 -del /f $(LIBDIR)\Win32.pm
1215 -del /f $(LIBDIR)\Win32API\File.pm
1216 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1217 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1218 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1219 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1220 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1221 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1222 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1223 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1224 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1225 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1226 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1227 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1228 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1229 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1230 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1231 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1232 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1233 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1234 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1235 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1236 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1237 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1238 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1239 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1240 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1241 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1242 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1243 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1245 pod2html pod2latex pod2man pod2text pod2usage \
1246 podchecker podselect
1247 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1248 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1249 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1250 -cd ..\x2p && del /f find2perl s2p psed *.bat
1251 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1255 -del /f $(PERLEXE_ICO) perl.base
1256 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1257 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1258 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1259 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1260 -if exist pod2htmd.tmp del pod2htmd.tmp
1261 -if exist pod2htmi.tmp del pod2htmi.tmp
1262 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1264 install : all installbare installhtml
1267 $(PERLEXE) ..\installperl
1268 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1269 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1270 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1271 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1272 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1275 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1277 inst_lib : $(CONFIGPM)
1278 copy splittree.pl ..
1279 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1280 $(RCOPY) ..\lib $(INST_LIB)\*.*
1282 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1283 cd ..\lib\unicore && \
1284 ..\$(MINIPERL) -I.. mktables -check $@ $(FIRSTUNIFILE)
1286 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1287 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1288 if exist ..\t\perl.exe del /f ..\t\perl.exe
1289 rename ..\t\miniperl.exe perl.exe
1290 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1293 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1295 test-prep : all utils
1296 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1297 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1298 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1302 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1305 test-reonly : reonly utils
1306 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1307 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1308 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1310 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b $(EXTRA)
1318 test-notty : test-prep
1319 set PERL_SKIP_TTY_TEST=1
1321 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1325 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1326 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1327 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1329 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1333 -@$(DEL) miniperlmain$(o)
1334 -@$(DEL) $(MINIPERL)
1335 -@$(DEL) perlglob$(o)
1336 -@$(DEL) perlmain$(o)
1341 -@$(DEL) $(WPERLEXE)
1343 -@$(DEL) $(CORE_OBJ)
1344 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1345 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1346 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1347 -@$(DEL) $(UNIDATAFILES)
1348 -@$(DEL) $(WIN32_OBJ)
1351 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1352 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1353 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1356 -@$(DEL) Extensions_static
1358 clean : Extensions_clean _clean
1360 realclean : Extensions_realclean MakePPPort_clean _clean
1362 # Handy way to run perlbug -ok without having to install and run the
1363 # installed perlbug. We don't re-run the tests here - we trust the user.
1364 # Please *don't* use this unless all tests pass.
1365 # If you want to report test failures, use "nmake nok" instead.
1367 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1370 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1373 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1376 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok