2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools **experimental**
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # uncomment to enable multiple interpreters. This is need for fork()
50 # emulation and for thread support.
55 # Beginnings of interpreter cloning/threads; now reasonably complete.
56 # This should be enabled to get the fork() emulation. This needs
62 # uncomment to enable the implicit "host" layer for all system calls
63 # made by perl. This needs USE_MULTI above. This is also needed to
69 # Comment out next assign to disable perl's I/O subsystem and use compiler's
70 # stdio for IO - depending on your compiler vendor and run time library you may
71 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
72 # You will also be unable to take full advantage of perl5.8's support for multiple
73 # encodings and may see lower IO performance. You have been warned.
77 # Comment this out if you don't want to enable large file support for
78 # some reason. Should normally only be changed to maintain compatibility
79 # with an older release of perl.
80 USE_LARGE_FILES = define
83 # uncomment one of the following lines if you are using either
84 # Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
90 # uncomment next line if you want debug version of perl (big,slow)
91 # If not enabled, we automatically try to use maximum optimization
92 # with all compilers that are known to have a working optimizer.
97 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
98 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
99 # This currently requires VC 5.0 with Service Pack 3 or later.
100 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
101 # and follow the directions in the package to install.
103 # Not recommended if you have VC 6.x and you're not running Windows 9x.
105 #USE_PERLCRT = define
108 # uncomment to enable linking with setargv.obj under the Visual C
109 # compiler. Setting this options enables perl to expand wildcards in
110 # arguments, but it may be harder to use alternate methods like
111 # File::DosGlob that are more powerful. This option is supported only with
114 #USE_SETARGV = define
117 # if you want to have the crypt() builtin function implemented, leave this or
118 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
119 # version of des_fcrypt().
124 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
125 # library, uncomment this, and make sure the library exists (see README.win32)
126 # Specify the full pathname of the library.
128 #CRYPT_LIB = fcrypt.lib
131 # set this if you wish to use perl's malloc
132 # WARNING: Turning this on/off WILL break binary compatibility with extensions
133 # you may have compiled with/without it. Be prepared to recompile all
134 # extensions if you change the default. Currently, this cannot be enabled
135 # if you ask for USE_IMP_SYS above.
137 #PERL_MALLOC = define
140 # set this to enable debugging mstats
141 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
142 # be enabled without PERL_MALLOC as well.
144 #DEBUG_MSTATS = define
148 # set the install locations of the compiler include/libraries
149 # Running VCVARS32.BAT is *required* when using Visual C.
150 # Some versions of Visual C don't define MSVCDIR in the environment,
151 # so you may have to set CCHOME explicitly (spaces in the path name should
156 CCINCDIR = $(CCHOME)\include
157 CCLIBDIR = $(CCHOME)\lib
160 # Additional compiler flags can be specified here.
164 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
165 # for old symbols by default, at the expense of extreme pollution. You most
166 # probably just want to build modules that won't compile with
167 # perl Makefile.PL POLLUTE=1
168 # instead of enabling this. Please report such modules to the respective
171 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
174 # This should normally be disabled. Enabling it will disable the File::Glob
175 # implementation of CORE::glob.
177 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
180 # This should normally be disabled. Enabling it causes perl to read scripts
181 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
182 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
185 # specify semicolon-separated list of extra directories that modules will
186 # look for libraries (spaces in path names need not be quoted)
191 # set this to your email address (perl will guess a value from
192 # from your loginname and your hostname, which may not be right)
197 ## Build configuration ends.
200 ##################### CHANGE THESE ONLY IF YOU MUST #####################
202 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
206 CRYPT_FLAG = -DHAVE_DES_FCRYPT
209 !IF "$(PERL_MALLOC)" == ""
214 !IF "$(DEBUG_MSTATS)" == ""
218 !IF "$(DEBUG_MSTATS)" == "define"
219 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
222 !IF "$(USE_IMP_SYS)" == "define"
226 !IF "$(USE_MULTI)" == ""
230 !IF "$(USE_ITHREADS)" == ""
234 !IF "$(USE_IMP_SYS)" == ""
238 !IF "$(USE_PERLIO)" == ""
242 !IF "$(USE_LARGE_FILES)" == ""
243 USE_LARGE_FILES = undef
246 !IF "$(USE_PERLCRT)" == ""
250 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
254 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
258 !IF "$(USE_MULTI)" != "undef"
259 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
262 !IF "$(USE_IMP_SYS)" != "undef"
263 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
266 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
267 PROCESSOR_ARCHITECTURE = x86
271 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
272 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
275 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
283 !IF "$(USE_MULTI)" == "define"
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
286 !IF "$(USE_PERLIO)" == "define"
287 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
289 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
293 !IF "$(USE_PERLIO)" == "define"
294 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
297 !IF "$(USE_ITHREADS)" == "define"
298 ARCHNAME = $(ARCHNAME)-thread
301 # Visual Studio 98 specific
302 !IF "$(CCTYPE)" == "MSVC60"
304 # VC 6.0 can load the socket dll on demand. Makes the test suite
305 # run in about 10% less time.
306 DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
309 ARCHDIR = ..\lib\$(ARCHNAME)
310 COREDIR = ..\lib\CORE
311 AUTODIR = ..\lib\auto
315 EXTUTILSDIR = $(LIBDIR)\ExtUtils
318 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
319 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
320 INST_LIB = $(INST_TOP)$(INST_VER)\lib
321 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
322 INST_COREDIR = $(INST_ARCHLIB)\CORE
323 INST_POD = $(INST_LIB)\pod
324 INST_HTML = $(INST_TOP)$(INST_VER)\html
327 # Programs to compile, build .lib files and link
332 LIB32 = $(LINK32) -lib
339 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
340 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
341 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
342 LOCDEFS = -DPERLDLL -DPERL_CORE
346 !IF "$(USE_PERLCRT)" != "define"
352 !IF "$(CFG)" == "Debug"
353 ! IF "$(CCTYPE)" == "MSVC20"
354 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
356 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
360 OPTIMIZE = -MD -DNDEBUG
362 ! IF "$(WIN64)" == "define"
363 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
364 OPTIMIZE = $(OPTIMIZE) -Ox -GL
365 LINK_DBG = $(LINK_DBG) -ltcg
367 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
368 OPTIMIZE = $(OPTIMIZE) -O1
369 #OPTIMIZE = $(OPTIMIZE) -O2
373 !IF "$(WIN64)" == "define"
374 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
375 OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
378 !IF "$(USE_PERLCRT)" != "define"
379 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
382 LIBBASEFILES = $(CRYPT_LIB) \
383 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
384 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
385 netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
388 # win64 doesn't have some libs
389 !IF "$(WIN64)" != "define"
390 LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
393 # we add LIBC here, since we may be using PerlCRT.dll
394 LIBFILES = $(LIBBASEFILES) $(LIBC)
396 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
397 $(PCHFLAGS) $(OPTIMIZE)
398 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
399 -libpath:"$(INST_COREDIR)" \
400 -machine:$(PROCESSOR_ARCHITECTURE)
404 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
406 #################### do not edit below this line #######################
407 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
415 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
418 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
424 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
425 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
433 # makedef.pl must be updated if this changes, and this should normally
434 # only change when there is an incompatible revision of the public API.
435 PERLIMPLIB = ..\perl59.lib
436 PERLDLL = ..\perl59.dll
438 MINIPERL = ..\miniperl.exe
440 PERLEXE = ..\perl.exe
441 WPERLEXE = ..\wperl.exe
442 GLOBEXE = ..\perlglob.exe
443 CONFIGPM = ..\lib\Config.pm
444 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
447 PERLEXE_ICO = .\perlexe.ico
448 PERLEXE_RES = .\perlexe.res
451 # Nominate a target which causes extensions to be re-built
452 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
453 # on and really only the interface - i.e. the .def file used to export symbols
455 PERLDEP = perldll.def
457 PL2BAT = bin\pl2bat.pl
458 GLOBBAT = bin\perlglob.bat
499 !IF "$(WIN64)" == "define"
500 CFGSH_TMPL = config.vc64
501 CFGH_TMPL = config_H.vc64
503 CFGSH_TMPL = config.vc
504 CFGH_TMPL = config_H.vc
507 XCOPY = xcopy /f /r /i /d
508 RCOPY = xcopy /f /r /i /e /d
515 # filenames given to xsubpp must have forward slashes (since it puts
516 # full pathnames in #line strings)
517 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
556 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
558 !IF "$(PERL_MALLOC)" == "define"
559 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
562 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
569 # We need this for miniperl build unless we override canned
570 # config.h #define building mini\*
571 #!IF "$(USE_PERLIO)" == "define"
572 WIN32_SRC = $(WIN32_SRC) .\win32io.c
575 !IF "$(CRYPT_SRC)" != ""
576 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
579 DLL_SRC = $(DYNALOADER).c
625 .\include\sys\socket.h \
628 CORE_H = $(CORE_NOCFG_H) .\config.h
630 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
631 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
632 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
633 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
634 $(MINIDIR)\miniperlmain$(o) \
635 $(MINIDIR)\perlio$(o)
636 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
637 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
638 DLL_OBJ = $(DLL_SRC:.c=.obj)
639 X2P_OBJ = $(X2P_SRC:.c=.obj)
641 PERLDLL_OBJ = $(CORE_OBJ)
642 PERLEXE_OBJ = perlmain$(o)
644 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
645 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
647 !IF "$(USE_SETARGV)" != ""
648 SETARGV_OBJ = setargv$(o)
651 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
652 SOCKET = $(EXTDIR)\Socket\Socket
653 FCNTL = $(EXTDIR)\Fcntl\Fcntl
654 OPCODE = $(EXTDIR)\Opcode\Opcode
655 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
657 POSIX = $(EXTDIR)\POSIX\POSIX
658 ATTRS = $(EXTDIR)\attrs\attrs
659 THREAD = $(EXTDIR)\Thread\Thread
662 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
663 ERRNO = $(EXTDIR)\Errno\Errno
664 PEEK = $(EXTDIR)\Devel\Peek\Peek
665 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
666 DPROF = $(EXTDIR)\Devel\DProf\DProf
667 GLOB = $(EXTDIR)\File\Glob\Glob
668 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
669 STORABLE = $(EXTDIR)\Storable\Storable
670 FILTER = $(EXTDIR)\Filter\Util\Call\Call
671 ENCODE = $(EXTDIR)\Encode\Encode
672 MD5 = $(EXTDIR)\Digest\MD5\MD5
673 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
674 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
675 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
676 CWD = $(EXTDIR)\Cwd\Cwd
677 LISTUTIL = $(EXTDIR)\List\Util\Util
678 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
679 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
680 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
681 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
683 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
684 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
685 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
686 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
687 IO_DLL = $(AUTODIR)\IO\IO.dll
688 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
689 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
690 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
691 B_DLL = $(AUTODIR)\B\B.dll
692 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
693 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
694 RE_DLL = $(AUTODIR)\re\re.dll
695 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
696 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
697 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
698 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
699 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
700 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
701 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
702 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
703 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
704 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
705 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
706 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
707 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
708 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
709 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
710 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
711 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
742 $(UNICODENORMALIZE).c
765 $(PERLIOSCALAR_DLL) \
773 $(UNICODENORMALIZE_DLL)
775 POD2HTML = $(PODDIR)\pod2html
776 POD2MAN = $(PODDIR)\pod2man
777 POD2LATEX = $(PODDIR)\pod2latex
778 POD2TEXT = $(PODDIR)\pod2text
781 "INST_DRV=$(INST_DRV)" \
782 "INST_TOP=$(INST_TOP)" \
783 "INST_VER=$(INST_VER)" \
784 "INST_ARCH=$(INST_ARCH)" \
785 "archname=$(ARCHNAME)" \
788 "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
789 "cf_email=$(EMAIL)" \
790 "d_crypt=$(D_CRYPT)" \
791 "d_mymalloc=$(PERL_MALLOC)" \
793 "incpath=$(CCINCDIR:"=\")" \
794 "libperl=$(PERLIMPLIB:..\=)" \
795 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
797 "make=$(MAKE_BARE)" \
798 "usethreads=$(USE_ITHREADS)" \
799 "useithreads=$(USE_ITHREADS)" \
800 "usemultiplicity=$(USE_MULTI)" \
801 "useperlio=$(USE_PERLIO)" \
802 "uselargefiles=$(USE_LARGE_FILES)" \
803 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
804 "optimize=$(OPTIMIZE:"=\")"
810 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
812 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
814 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
816 #------------------------------------------------------------
818 $(GLOBEXE) : perlglob$(o)
819 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
820 perlglob$(o) setargv$(o)
822 perlglob$(o) : perlglob.c
824 config.w32 : $(CFGSH_TMPL)
825 copy $(CFGSH_TMPL) config.w32
827 .\config.h : $(CFGH_TMPL)
829 copy $(CFGH_TMPL) config.h
831 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
832 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
834 # this target is for when changes to the main config.sh happen
835 # edit config.{b,v,g}c and make this target once for each supported
836 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
838 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
840 -del /f perl.exe perl*.dll
845 -perl config_h.PL "INST_VER=$(INST_VER)"
846 rename config.h $(CFGH_TMPL)
848 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
852 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
853 $(XCOPY) ..\*.h $(COREDIR)\*.*
854 $(XCOPY) *.h $(COREDIR)\*.*
855 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
856 $(RCOPY) include $(COREDIR)\*.*
857 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
858 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
860 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
861 $(LINK32) -subsystem:console -out:$@ @<<
862 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
866 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
868 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
869 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
871 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
872 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
874 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
875 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
876 !IF "$(USE_IMP_SYS)" == "define"
877 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
878 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
881 # 1. we don't want to rebuild miniperl.exe when config.h changes
882 # 2. we don't want to rebuild miniperl.exe with non-default config.h
883 $(MINI_OBJ) : $(CORE_NOCFG_H)
885 $(WIN32_OBJ) : $(CORE_H)
886 $(CORE_OBJ) : $(CORE_H)
887 $(DLL_OBJ) : $(CORE_H)
888 $(X2P_OBJ) : $(CORE_H)
890 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
891 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
892 CCTYPE=$(CCTYPE) > perldll.def
894 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
895 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
896 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
898 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
900 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
901 $(MINIPERL) makeico.pl > $@
903 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
905 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
907 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
910 ..\x2p\a2p$(o) : ..\x2p\a2p.c
911 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
913 ..\x2p\hash$(o) : ..\x2p\hash.c
914 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
916 ..\x2p\str$(o) : ..\x2p\str.c
917 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
919 ..\x2p\util$(o) : ..\x2p\util.c
920 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
922 ..\x2p\walk$(o) : ..\x2p\walk.c
923 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
925 $(X2P) : $(MINIPERL) $(X2P_OBJ)
926 $(MINIPERL) ..\x2p\find2perl.PL
927 $(MINIPERL) ..\x2p\s2p.PL
928 $(LINK32) -subsystem:console -out:$@ @<<
929 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
932 perlmain.c : runperl.c
933 copy runperl.c perlmain.c
935 perlmain$(o) : perlmain.c
936 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
938 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
939 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
940 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
941 copy $(PERLEXE) $(WPERLEXE)
942 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
944 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
946 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
947 if not exist $(AUTODIR) mkdir $(AUTODIR)
949 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
950 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
952 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
953 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
955 $(XSUBPP) dl_win32.xs > $(*B).c
958 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
959 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
961 #----------------------------------------------------------------------------------
962 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
963 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
966 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
968 Extensions_realclean:
969 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
971 #----------------------------------------------------------------------------------
974 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
975 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
976 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
978 # Note that this next section is parsed (and regenerated) by pod/buildtoc
979 # so please check that script before making structural changes here
981 utils: $(PERLEXE) $(X2P)
983 $(MAKE) PERL=$(MINIPERL)
985 copy ..\vms\perlvms.pod .\perlvms.pod
986 copy ..\README.aix ..\pod\perlaix.pod
987 copy ..\README.amiga ..\pod\perlamiga.pod
988 copy ..\README.apollo ..\pod\perlapollo.pod
989 copy ..\README.beos ..\pod\perlbeos.pod
990 copy ..\README.bs2000 ..\pod\perlbs2000.pod
991 copy ..\README.ce ..\pod\perlce.pod
992 copy ..\README.cn ..\pod\perlcn.pod
993 copy ..\README.cygwin ..\pod\perlcygwin.pod
994 copy ..\README.dgux ..\pod\perldgux.pod
995 copy ..\README.dos ..\pod\perldos.pod
996 copy ..\README.epoc ..\pod\perlepoc.pod
997 copy ..\README.freebsd ..\pod\perlfreebsd.pod
998 copy ..\README.hpux ..\pod\perlhpux.pod
999 copy ..\README.hurd ..\pod\perlhurd.pod
1000 copy ..\README.irix ..\pod\perlirix.pod
1001 copy ..\README.jp ..\pod\perljp.pod
1002 copy ..\README.ko ..\pod\perlko.pod
1003 copy ..\README.machten ..\pod\perlmachten.pod
1004 copy ..\README.macos ..\pod\perlmacos.pod
1005 copy ..\README.macosx ..\pod\perlmacosx.pod
1006 copy ..\README.mint ..\pod\perlmint.pod
1007 copy ..\README.mpeix ..\pod\perlmpeix.pod
1008 copy ..\README.netware ..\pod\perlnetware.pod
1009 copy ..\README.os2 ..\pod\perlos2.pod
1010 copy ..\README.os390 ..\pod\perlos390.pod
1011 copy ..\README.os400 ..\pod\perlos400.pod
1012 copy ..\README.plan9 ..\pod\perlplan9.pod
1013 copy ..\README.qnx ..\pod\perlqnx.pod
1014 copy ..\README.solaris ..\pod\perlsolaris.pod
1015 copy ..\README.tru64 ..\pod\perltru64.pod
1016 copy ..\README.tw ..\pod\perltw.pod
1017 copy ..\README.uts ..\pod\perluts.pod
1018 copy ..\README.vmesa ..\pod\perlvmesa.pod
1019 copy ..\README.vms ..\pod\perlvms.pod
1020 copy ..\README.vos ..\pod\perlvos.pod
1021 copy ..\README.win32 ..\pod\perlwin32.pod
1022 copy ..\pod\perl591delta.pod ..\pod\perldelta.pod
1023 $(MAKE) -f ..\win32\pod.mak converters
1025 $(PERLEXE) lib_pm.PL
1027 $(PERLEXE) $(PL2BAT) $(UTILS)
1029 # Note that the pod cleanup in this next section is parsed (and regenerated
1030 # by pod/buildtoc so please check that script before making changes here
1032 # the doubled rmdir calls are needed because older cmd shells
1033 # don't understand /q
1034 distclean: realclean
1035 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1036 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1038 -del /f $(EXTENSION_DLL)
1039 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1040 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1041 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1042 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1043 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1044 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1045 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1046 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1047 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1048 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1049 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1050 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1051 -del /f $(LIBDIR)\ByteLoader.pm
1052 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1053 -del /f $(LIBDIR)\Devel\PPPort.pm
1054 -del /f $(LIBDIR)\File\Glob.pm
1055 -del /f $(LIBDIR)\Storable.pm
1056 -del /f $(LIBDIR)\Digest\MD5.pm
1057 -del /f $(LIBDIR)\PerlIO\encoding.pm
1058 -del /f $(LIBDIR)\PerlIO\scalar.pm
1059 -del /f $(LIBDIR)\PerlIO\via.pm
1060 -del /f $(LIBDIR)\Sys\Hostname.pm
1061 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1062 -del /f $(LIBDIR)\threads\shared.pm
1063 -del /f $(LIBDIR)\Time\HiRes.pm
1064 -del /f $(LIBDIR)\Unicode\Normalize.pm
1065 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1066 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1067 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1068 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1069 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1070 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1071 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1072 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1073 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1074 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1075 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1076 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1077 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1078 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1079 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1080 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1081 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1082 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1083 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1084 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1085 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1086 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1087 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1088 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1089 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1090 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1091 perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
1092 perluts.pod perlvmesa.pod perlvms.pod perlvos.pod perlwin32.pod \
1093 pod2html pod2latex pod2man pod2text pod2usage \
1094 podchecker podselect
1095 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1096 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1097 xsubpp instmodsh prove
1098 -cd ..\x2p && del /f find2perl s2p psed *.bat
1099 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1102 -del /f $(PERLEXE_ICO)
1103 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1104 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1105 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1106 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1107 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1108 -if exist $(COREDIR) rmdir /s $(COREDIR)
1110 install : all installbare installhtml
1113 $(PERLEXE) ..\installperl
1114 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1115 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1116 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1119 $(RCOPY) html\*.* $(INST_HTML)\*.*
1121 inst_lib : $(CONFIGPM)
1122 copy splittree.pl ..
1123 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1124 $(RCOPY) ..\lib $(INST_LIB)\*.*
1126 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
1127 $(XCOPY) $(MINIPERL) ..\t\perl.exe
1128 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1132 $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1135 test-prep : all utils
1136 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1137 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1138 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1142 $(PERLEXE) -I..\lib harness
1145 test-notty : test-prep
1146 set PERL_SKIP_TTY_TEST=1
1148 $(PERLEXE) -I..\lib harness
1152 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1153 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1154 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1156 $(PERLEXE) -I..\lib harness
1160 -@$(DEL) miniperlmain$(o)
1161 -@$(DEL) $(MINIPERL)
1162 -@$(DEL) perlglob$(o)
1163 -@$(DEL) perlmain$(o)
1168 -@$(DEL) $(WPERLEXE)
1170 -@$(DEL) $(CORE_OBJ)
1171 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1172 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1173 -@$(DEL) $(WIN32_OBJ)
1176 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1177 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1178 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1182 clean : Extensions_clean _clean
1184 realclean : Extensions_realclean _clean
1186 # Handy way to run perlbug -ok without having to install and run the
1187 # installed perlbug. We don't re-run the tests here - we trust the user.
1188 # Please *don't* use this unless all tests pass.
1189 # If you want to report test failures, use "nmake nok" instead.
1191 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1194 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1197 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1200 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok