2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual C++ 98)
99 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
101 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
103 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
105 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # uncomment next line if you want debug version of perl (big,slow)
110 # If not enabled, we automatically try to use maximum optimization
111 # with all compilers that are known to have a working optimizer.
116 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
117 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
118 # This currently requires VC 5.0 with Service Pack 3 or later.
119 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
120 # and follow the directions in the package to install.
122 # Not recommended if you have VC 6.x and you're not running Windows 9x.
124 #USE_PERLCRT = define
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # if you want to have the crypt() builtin function implemented, leave this or
137 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
138 # version of des_fcrypt().
143 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
144 # library, uncomment this, and make sure the library exists (see README.win32)
145 # Specify the full pathname of the library.
147 #CRYPT_LIB = fcrypt.lib
150 # set this if you wish to use perl's malloc
151 # WARNING: Turning this on/off WILL break binary compatibility with extensions
152 # you may have compiled with/without it. Be prepared to recompile all
153 # extensions if you change the default. Currently, this cannot be enabled
154 # if you ask for USE_IMP_SYS above.
156 #PERL_MALLOC = define
159 # set this to enable debugging mstats
160 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
161 # be enabled without PERL_MALLOC as well.
163 #DEBUG_MSTATS = define
167 # set the install locations of the compiler include/libraries
168 # Running VCVARS32.BAT is *required* when using Visual C.
169 # Some versions of Visual C don't define MSVCDIR in the environment,
170 # so you may have to set CCHOME explicitly (spaces in the path name should
175 CCINCDIR = $(CCHOME)\include
176 CCLIBDIR = $(CCHOME)\lib
179 # Additional compiler flags can be specified here.
181 BUILDOPT = $(BUILDOPTEXTRA)
184 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
185 # internal hash function unless the PERL_HASH_SEED environment variable is set.
186 # Alternatively, adding -DNO_HASH_SEED will completely disable the
187 # randomization feature.
188 # The latter is required to maintain binary compatibility with Perl 5.8.0.
190 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
191 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
194 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
195 # for old symbols by default, at the expense of extreme pollution. You most
196 # probably just want to build modules that won't compile with
197 # perl Makefile.PL POLLUTE=1
198 # instead of enabling this. Please report such modules to the respective
201 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
204 # This should normally be disabled. Enabling it will disable the File::Glob
205 # implementation of CORE::glob.
207 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
210 # This should normally be disabled. Enabling it causes perl to read scripts
211 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
213 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
216 # specify semicolon-separated list of extra directories that modules will
217 # look for libraries (spaces in path names need not be quoted)
222 # set this to your email address (perl will guess a value from
223 # from your loginname and your hostname, which may not be right)
228 ## Build configuration ends.
231 ##################### CHANGE THESE ONLY IF YOU MUST #####################
233 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
237 CRYPT_FLAG = -DHAVE_DES_FCRYPT
240 !IF "$(USE_IMP_SYS)" == "define"
245 !IF "$(PERL_MALLOC)" == ""
250 !IF "$(DEBUG_MSTATS)" == ""
254 !IF "$(DEBUG_MSTATS)" == "define"
255 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
258 !IF "$(USE_SITECUST)" == ""
262 !IF "$(USE_MULTI)" == ""
266 !IF "$(USE_ITHREADS)" == ""
270 !IF "$(USE_IMP_SYS)" == ""
274 !IF "$(USE_PERLIO)" == ""
278 !IF "$(USE_LARGE_FILES)" == ""
279 USE_LARGE_FILES = undef
282 !IF "$(USE_PERLCRT)" == ""
286 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
290 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
294 !IF "$(USE_SITECUST)" == "define"
295 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
298 !IF "$(USE_MULTI)" != "undef"
299 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
302 !IF "$(USE_IMP_SYS)" != "undef"
303 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
306 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
307 PROCESSOR_ARCHITECTURE = x86
311 # When we are running from a 32bit cmd.exe on AMD64 then
312 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
314 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
315 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
318 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
326 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
327 !IF "$(ARCHITECTURE)" == "AMD64"
330 !IF "$(ARCHITECTURE)" == "IA64"
334 !IF "$(USE_MULTI)" == "define"
335 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
337 !IF "$(USE_PERLIO)" == "define"
338 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
340 ARCHNAME = MSWin32-$(ARCHITECTURE)
344 !IF "$(USE_PERLIO)" == "define"
345 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
348 !IF "$(USE_ITHREADS)" == "define"
349 ARCHNAME = $(ARCHNAME)-thread
352 # Visual C++ 98, .NET 2003 and 2005 specific.
353 # VC++ 6.x, 7.x and 8.x can load DLL's on demand. Makes the test suite run in
354 # about 10% less time. (The free version of 7.x can't do this, but the free
355 # version of 8.x can.)
356 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
357 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
358 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
361 ARCHDIR = ..\lib\$(ARCHNAME)
362 COREDIR = ..\lib\CORE
363 AUTODIR = ..\lib\auto
367 EXTUTILSDIR = $(LIBDIR)\ExtUtils
371 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
372 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
373 INST_LIB = $(INST_TOP)$(INST_VER)\lib
374 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
375 INST_COREDIR = $(INST_ARCHLIB)\CORE
376 INST_HTML = $(INST_TOP)$(INST_VER)\html
379 # Programs to compile, build .lib files and link
384 LIB32 = $(LINK32) -lib
391 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
392 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
393 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
394 LOCDEFS = -DPERLDLL -DPERL_CORE
398 !IF "$(USE_PERLCRT)" != "define"
404 !IF "$(CFG)" == "Debug"
405 ! IF "$(CCTYPE)" == "MSVC20"
406 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
408 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
412 OPTIMIZE = -MD -Zi -DNDEBUG
413 # we enable debug symbols in release builds also
414 LINK_DBG = -debug -opt:ref,icf
415 # you may want to enable this if you want COFF symbols in the executables
416 # in addition to the PDB symbols. The default Dr. Watson that ships with
417 # Windows can use the the former but not latter. The free WinDbg can be
418 # installed to get better stack traces from just the PDB symbols, so we
419 # avoid the bloat of COFF symbols by default.
420 #LINK_DBG = $(LINK_DBG) -debugtype:both
421 ! IF "$(WIN64)" == "define"
422 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
423 OPTIMIZE = $(OPTIMIZE) -Ox -GL
424 LINK_DBG = $(LINK_DBG) -ltcg
426 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
427 OPTIMIZE = $(OPTIMIZE) -O1
428 #OPTIMIZE = $(OPTIMIZE) -O2
432 !IF "$(WIN64)" == "define"
433 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
434 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
437 !IF "$(USE_PERLCRT)" != "define"
438 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
441 LIBBASEFILES = $(CRYPT_LIB) \
442 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
443 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
444 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
445 version.lib odbc32.lib odbccp32.lib
447 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
448 # include the buffer overrun verification code used by the /GS switch.
449 # Since the code links against libraries that are compiled with /GS, this
450 # "security cookie verification" must be included via bufferoverlow.lib.
451 !IF "$(WIN64)" == "define"
452 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
455 # we add LIBC here, since we may be using PerlCRT.dll
456 LIBFILES = $(LIBBASEFILES) $(LIBC)
458 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
459 EXTRACFLAGS = -nologo -GF -W3
460 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
461 $(PCHFLAGS) $(OPTIMIZE)
462 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
463 -libpath:"$(INST_COREDIR)" \
464 -machine:$(PROCESSOR_ARCHITECTURE)
468 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
470 #################### do not edit below this line #######################
471 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
479 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
482 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
488 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
489 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
497 # makedef.pl must be updated if this changes, and this should normally
498 # only change when there is an incompatible revision of the public API.
499 PERLIMPLIB = ..\perl59.lib
500 PERLDLL = ..\perl59.dll
502 MINIPERL = ..\miniperl.exe
504 PERLEXE = ..\perl.exe
505 WPERLEXE = ..\wperl.exe
506 GLOBEXE = ..\perlglob.exe
507 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
508 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
511 # Unicode data files generated by mktables
512 FIRSTUNIFILE = ..\lib\unicore\Canonical.pl
513 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
514 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
515 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
516 ..\lib\unicore\PVA.pl
518 # Directories of Unicode data files generated by mktables
519 UNIDATADIR1 = ..\lib\unicore\To
520 UNIDATADIR2 = ..\lib\unicore\lib
522 PERLEXE_ICO = .\perlexe.ico
523 PERLEXE_RES = .\perlexe.res
526 # Nominate a target which causes extensions to be re-built
527 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
528 # on and really only the interface - i.e. the .def file used to export symbols
530 PERLDEP = perldll.def
532 PL2BAT = bin\pl2bat.pl
533 GLOBBAT = bin\perlglob.bat
549 ..\utils\config_data \
578 !IF "$(WIN64)" == "define"
579 CFGSH_TMPL = config.vc64
580 CFGH_TMPL = config_H.vc64
582 CFGSH_TMPL = config.vc
583 CFGH_TMPL = config_H.vc
586 XCOPY = xcopy /f /r /i /d /y
587 RCOPY = xcopy /f /r /i /e /d /y
594 # filenames given to xsubpp must have forward slashes (since it puts
595 # full pathnames in #line strings)
596 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
636 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
638 !IF "$(PERL_MALLOC)" == "define"
639 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
642 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
649 # We need this for miniperl build unless we override canned
650 # config.h #define building mini\*
651 #!IF "$(USE_PERLIO)" == "define"
652 WIN32_SRC = $(WIN32_SRC) .\win32io.c
655 !IF "$(CRYPT_SRC)" != ""
656 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
659 DLL_SRC = $(DYNALOADER).c
706 .\include\sys\socket.h \
709 CORE_H = $(CORE_NOCFG_H) .\config.h
711 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
712 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
713 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
714 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
715 $(MINIDIR)\miniperlmain$(o) \
716 $(MINIDIR)\perlio$(o)
717 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
718 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
719 DLL_OBJ = $(DLL_SRC:.c=.obj)
720 X2P_OBJ = $(X2P_SRC:.c=.obj)
722 PERLDLL_OBJ = $(CORE_OBJ)
723 PERLEXE_OBJ = perlmain$(o)
725 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
726 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
728 !IF "$(USE_SETARGV)" != ""
729 SETARGV_OBJ = setargv$(o)
732 # specify static extensions here
733 #STATIC_EXT = Cwd Compress/Zlib
736 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
737 SOCKET = $(EXTDIR)\Socket\Socket
738 FCNTL = $(EXTDIR)\Fcntl\Fcntl
739 OPCODE = $(EXTDIR)\Opcode\Opcode
740 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
742 POSIX = $(EXTDIR)\POSIX\POSIX
743 ATTRS = $(EXTDIR)\attrs\attrs
744 THREAD = $(EXTDIR)\Thread\Thread
747 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
748 ERRNO = $(EXTDIR)\Errno\Errno
749 PEEK = $(EXTDIR)\Devel\Peek\Peek
750 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
751 DPROF = $(EXTDIR)\Devel\DProf\DProf
752 GLOB = $(EXTDIR)\File\Glob\Glob
753 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
754 STORABLE = $(EXTDIR)\Storable\Storable
755 FILTER = $(EXTDIR)\Filter\Util\Call\Call
756 ENCODE = $(EXTDIR)\Encode\Encode
757 MD5 = $(EXTDIR)\Digest\MD5\MD5
758 SHA = $(EXTDIR)\Digest\SHA\SHA
759 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
760 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
761 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
762 CWD = $(EXTDIR)\Cwd\Cwd
763 LISTUTIL = $(EXTDIR)\List\Util\Util
764 HASHUTIL = $(EXTDIR)\Hash\Util\Util
765 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
766 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
767 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
768 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
769 MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
770 COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
771 WIN32_DIR = ext\Win32
772 WIN32APIFILE = ext\Win32API\File\File
774 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
775 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
776 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
777 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
778 IO_DLL = $(AUTODIR)\IO\IO.dll
779 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
780 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
781 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
782 B_DLL = $(AUTODIR)\B\B.dll
783 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
784 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
785 RE_DLL = $(AUTODIR)\re\re.dll
786 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
787 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
788 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
789 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
790 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
791 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
792 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
793 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
794 SHA_DLL = $(AUTODIR)\Digest\SHA\SHA.dll
795 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
796 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
797 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
798 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
799 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
800 HASHUTIL_DLL = $(AUTODIR)\HASH\Util\Util.dll
801 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
802 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
803 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
804 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
805 MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
806 COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
807 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
808 WIN32APIFILE_DLL = $(AUTODIR)\Win32API\File\File.dll
841 $(UNICODENORMALIZE).c \
842 $(MATHBIGINTFASTCALC).c \
869 $(PERLIOSCALAR_DLL) \
878 $(UNICODENORMALIZE_DLL) \
879 $(MATHBIGINTFASTCALC_DLL) \
880 $(COMPRESSZLIB_DLL) \
885 "INST_DRV=$(INST_DRV)" \
886 "INST_TOP=$(INST_TOP)" \
887 "INST_VER=$(INST_VER)" \
888 "INST_ARCH=$(INST_ARCH)" \
889 "archname=$(ARCHNAME)" \
892 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
893 "cf_email=$(EMAIL)" \
894 "d_crypt=$(D_CRYPT)" \
895 "d_mymalloc=$(PERL_MALLOC)" \
897 "incpath=$(CCINCDIR:"=\")" \
898 "libperl=$(PERLIMPLIB:..\=)" \
899 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
901 "make=$(MAKE_BARE)" \
902 "static_ext=$(STATIC_EXT)" \
903 "usethreads=$(USE_ITHREADS)" \
904 "useithreads=$(USE_ITHREADS)" \
905 "usemultiplicity=$(USE_MULTI)" \
906 "useperlio=$(USE_PERLIO)" \
907 "uselargefiles=$(USE_LARGE_FILES)" \
908 "usesitecustomize=$(USE_SITECUST)" \
909 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
910 "optimize=$(OPTIMIZE:"=\")"
916 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
917 $(X2P) MakePPPort Extensions
918 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
920 reonly : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
921 $(X2P) Extensions_reonly
922 @echo Perl and 're' are up to date.
924 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
926 #------------------------------------------------------------
928 $(GLOBEXE) : perlglob$(o)
929 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
930 perlglob$(o) setargv$(o)
932 perlglob$(o) : perlglob.c
934 config.w32 : $(CFGSH_TMPL)
935 copy $(CFGSH_TMPL) config.w32
937 .\config.h : $(CFGH_TMPL)
939 copy $(CFGH_TMPL) config.h
941 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
942 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
944 # this target is for when changes to the main config.sh happen
945 # edit config.{b,v,g}c and make this target once for each supported
946 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
948 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
950 -del /f perl.exe perl*.dll
955 -perl config_h.PL "INST_VER=$(INST_VER)"
956 rename config.h $(CFGH_TMPL)
958 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
962 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
963 $(XCOPY) ..\*.h $(COREDIR)\*.*
964 $(XCOPY) *.h $(COREDIR)\*.*
965 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
966 $(RCOPY) include $(COREDIR)\*.*
967 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
968 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
970 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
971 $(LINK32) -subsystem:console -out:$@ @<<
972 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
976 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
978 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
979 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
981 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
982 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
984 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
985 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
986 !IF "$(USE_IMP_SYS)" == "define"
987 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
988 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
991 # 1. we don't want to rebuild miniperl.exe when config.h changes
992 # 2. we don't want to rebuild miniperl.exe with non-default config.h
993 $(MINI_OBJ) : $(CORE_NOCFG_H)
995 $(WIN32_OBJ) : $(CORE_H)
996 $(CORE_OBJ) : $(CORE_H)
997 $(DLL_OBJ) : $(CORE_H)
998 $(X2P_OBJ) : $(CORE_H)
1000 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1001 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1002 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
1003 CCTYPE=$(CCTYPE) > perldll.def
1005 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1006 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
1007 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
1009 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1011 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1012 $(MINIPERL) makeico.pl > $@
1014 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1016 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1018 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1021 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1022 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1024 ..\x2p\hash$(o) : ..\x2p\hash.c
1025 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1027 ..\x2p\str$(o) : ..\x2p\str.c
1028 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1030 ..\x2p\util$(o) : ..\x2p\util.c
1031 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1033 ..\x2p\walk$(o) : ..\x2p\walk.c
1034 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1036 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1037 $(MINIPERL) ..\x2p\find2perl.PL
1038 $(MINIPERL) ..\x2p\s2p.PL
1039 $(LINK32) -subsystem:console -out:$@ @<<
1040 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1043 perlmain.c : runperl.c
1044 copy runperl.c perlmain.c
1046 perlmain$(o) : perlmain.c
1047 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1049 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1050 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1051 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1052 copy $(PERLEXE) $(WPERLEXE)
1053 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1054 copy splittree.pl ..
1055 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1057 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1058 if not exist $(AUTODIR) mkdir $(AUTODIR)
1060 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1061 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1063 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1064 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1066 $(XSUBPP) dl_win32.xs > $(*B).c
1069 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1070 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1072 MakePPPort: $(MINIPERL) $(CONFIGPM)
1073 $(MINIPERL) -I..\lib ..\mkppport
1076 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1078 #-------------------------------------------------------------------------------
1079 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1080 $(XCOPY) ..\*.h $(COREDIR)\*.*
1081 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1082 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1084 Extensions_reonly: buildext.pl $(PERLDEP) $(CONFIGPM)
1085 $(XCOPY) ..\*.h $(COREDIR)\*.*
1086 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1087 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1089 Extensions_static : buildext.pl
1090 $(XCOPY) ..\*.h $(COREDIR)\*.*
1091 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1092 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1093 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1096 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1097 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1099 Extensions_realclean:
1100 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1101 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1103 #-------------------------------------------------------------------------------
1106 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1107 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1108 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1110 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1111 # so please check that script before making structural changes here
1113 utils: $(PERLEXE) $(X2P)
1115 $(MAKE) PERL=$(MINIPERL)
1117 copy ..\vms\perlvms.pod .\perlvms.pod
1118 copy ..\README.aix ..\pod\perlaix.pod
1119 copy ..\README.amiga ..\pod\perlamiga.pod
1120 copy ..\README.apollo ..\pod\perlapollo.pod
1121 copy ..\README.beos ..\pod\perlbeos.pod
1122 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1123 copy ..\README.ce ..\pod\perlce.pod
1124 copy ..\README.cn ..\pod\perlcn.pod
1125 copy ..\README.cygwin ..\pod\perlcygwin.pod
1126 copy ..\README.dgux ..\pod\perldgux.pod
1127 copy ..\README.dos ..\pod\perldos.pod
1128 copy ..\README.epoc ..\pod\perlepoc.pod
1129 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1130 copy ..\README.hpux ..\pod\perlhpux.pod
1131 copy ..\README.hurd ..\pod\perlhurd.pod
1132 copy ..\README.irix ..\pod\perlirix.pod
1133 copy ..\README.jp ..\pod\perljp.pod
1134 copy ..\README.ko ..\pod\perlko.pod
1135 copy ..\README.linux ..\pod\perllinux.pod
1136 copy ..\README.machten ..\pod\perlmachten.pod
1137 copy ..\README.macos ..\pod\perlmacos.pod
1138 copy ..\README.macosx ..\pod\perlmacosx.pod
1139 copy ..\README.mint ..\pod\perlmint.pod
1140 copy ..\README.mpeix ..\pod\perlmpeix.pod
1141 copy ..\README.netware ..\pod\perlnetware.pod
1142 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1143 copy ..\README.os2 ..\pod\perlos2.pod
1144 copy ..\README.os390 ..\pod\perlos390.pod
1145 copy ..\README.os400 ..\pod\perlos400.pod
1146 copy ..\README.plan9 ..\pod\perlplan9.pod
1147 copy ..\README.qnx ..\pod\perlqnx.pod
1148 copy ..\README.riscos ..\pod\perlriscos.pod
1149 copy ..\README.solaris ..\pod\perlsolaris.pod
1150 copy ..\README.symbian ..\pod\perlsymbian.pod
1151 copy ..\README.tru64 ..\pod\perltru64.pod
1152 copy ..\README.tw ..\pod\perltw.pod
1153 copy ..\README.uts ..\pod\perluts.pod
1154 copy ..\README.vmesa ..\pod\perlvmesa.pod
1155 copy ..\README.vms ..\pod\perlvms.pod
1156 copy ..\README.vos ..\pod\perlvos.pod
1157 copy ..\README.win32 ..\pod\perlwin32.pod
1158 copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
1159 $(MAKE) -f ..\win32\pod.mak converters
1161 $(PERLEXE) lib_pm.PL
1163 $(PERLEXE) $(PL2BAT) $(UTILS)
1165 # Note that the pod cleanup in this next section is parsed (and regenerated
1166 # by pod/buildtoc so please check that script before making changes here
1168 distclean: realclean
1169 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1170 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1172 -del /f $(EXTENSION_DLL)
1173 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1174 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1175 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1176 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1177 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1178 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1179 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1180 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1181 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1182 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1183 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1184 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1185 -del /f $(LIBDIR)\ByteLoader.pm
1186 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1187 -del /f $(LIBDIR)\Devel\PPPort.pm
1188 -del /f $(LIBDIR)\File\Glob.pm
1189 -del /f $(LIBDIR)\Storable.pm
1190 -del /f $(LIBDIR)\Digest\MD5.pm
1191 -del /f $(LIBDIR)\Digest\SHA.pm
1192 -del /f $(LIBDIR)\PerlIO\encoding.pm
1193 -del /f $(LIBDIR)\PerlIO\scalar.pm
1194 -del /f $(LIBDIR)\PerlIO\via.pm
1195 -del /f $(LIBDIR)\Sys\Hostname.pm
1196 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1197 -del /f $(LIBDIR)\threads\shared.pm
1198 -del /f $(LIBDIR)\Time\HiRes.pm
1199 -del /f $(LIBDIR)\Unicode\Normalize.pm
1200 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1201 -del /f $(LIBDIR)\Win32.pm
1202 -del /f $(LIBDIR)\Win32API\File.pm
1203 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1204 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1205 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1206 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1207 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1208 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1209 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1210 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1211 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1212 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1213 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1214 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1215 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1216 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1217 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1218 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1219 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1220 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1221 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1222 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1223 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1224 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1225 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1226 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1227 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1228 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1229 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1230 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1232 pod2html pod2latex pod2man pod2text pod2usage \
1233 podchecker podselect
1234 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1235 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1236 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1237 -cd ..\x2p && del /f find2perl s2p psed *.bat
1238 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1242 -del /f $(PERLEXE_ICO) perl.base
1243 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1244 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1245 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1246 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1247 -if exist pod2htmd.tmp del pod2htmd.tmp
1248 -if exist pod2htmi.tmp del pod2htmi.tmp
1249 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1251 install : all installbare installhtml
1254 $(PERLEXE) ..\installperl
1255 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1256 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1257 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1258 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1259 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1262 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1264 inst_lib : $(CONFIGPM)
1265 copy splittree.pl ..
1266 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1267 $(RCOPY) ..\lib $(INST_LIB)\*.*
1269 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1270 cd ..\lib\unicore && \
1271 ..\$(MINIPERL) -I.. mktables -check $@ $(FIRSTUNIFILE)
1273 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1274 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1275 if exist ..\t\perl.exe del /f ..\t\perl.exe
1276 rename ..\t\miniperl.exe perl.exe
1277 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1280 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1282 test-prep : all utils
1283 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1284 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1285 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1289 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1292 test-reonly : reonly utils
1293 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1294 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1295 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1297 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b $(EXTRA)
1300 test-notty : test-prep
1301 set PERL_SKIP_TTY_TEST=1
1303 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1307 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1308 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1309 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1311 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1315 -@$(DEL) miniperlmain$(o)
1316 -@$(DEL) $(MINIPERL)
1317 -@$(DEL) perlglob$(o)
1318 -@$(DEL) perlmain$(o)
1323 -@$(DEL) $(WPERLEXE)
1325 -@$(DEL) $(CORE_OBJ)
1326 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1327 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1328 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1329 -@$(DEL) $(UNIDATAFILES)
1330 -@$(DEL) $(WIN32_OBJ)
1333 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1334 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1335 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1338 -@$(DEL) Extensions_static
1340 clean : Extensions_clean _clean
1342 realclean : Extensions_realclean MakePPPort_clean _clean
1344 # Handy way to run perlbug -ok without having to install and run the
1345 # installed perlbug. We don't re-run the tests here - we trust the user.
1346 # Please *don't* use this unless all tests pass.
1347 # If you want to report test failures, use "nmake nok" instead.
1349 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1352 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1355 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1358 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok