2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools **experimental**
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # uncomment to enable multiple interpreters. This is need for fork()
50 # emulation and for thread support.
55 # Beginnings of interpreter cloning/threads; now reasonably complete.
56 # This should be enabled to get the fork() emulation. This needs
62 # uncomment to enable the implicit "host" layer for all system calls
63 # made by perl. This needs USE_MULTI above. This is also needed to
69 # Comment out next assign to disable perl's I/O subsystem and use compiler's
70 # stdio for IO - depending on your compiler vendor and run time library you may
71 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
72 # You will also be unable to take full advantage of perl5.8's support for multiple
73 # encodings and may see lower IO performance. You have been warned.
77 # Comment this out if you don't want to enable large file support for
78 # some reason. Should normally only be changed to maintain compatibility
79 # with an older release of perl.
80 USE_LARGE_FILES = define
83 # uncomment one of the following lines if you are using either
84 # Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
90 # uncomment next line if you want debug version of perl (big,slow)
91 # If not enabled, we automatically try to use maximum optimization
92 # with all compilers that are known to have a working optimizer.
97 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
98 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
99 # This currently requires VC 5.0 with Service Pack 3 or later.
100 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
101 # and follow the directions in the package to install.
103 # Not recommended if you have VC 6.x and you're not running Windows 9x.
105 #USE_PERLCRT = define
108 # uncomment to enable linking with setargv.obj under the Visual C
109 # compiler. Setting this options enables perl to expand wildcards in
110 # arguments, but it may be harder to use alternate methods like
111 # File::DosGlob that are more powerful. This option is supported only with
114 #USE_SETARGV = define
117 # if you want to have the crypt() builtin function implemented, leave this or
118 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
119 # version of des_fcrypt().
124 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
125 # library, uncomment this, and make sure the library exists (see README.win32)
126 # Specify the full pathname of the library.
128 #CRYPT_LIB = fcrypt.lib
131 # set this if you wish to use perl's malloc
132 # WARNING: Turning this on/off WILL break binary compatibility with extensions
133 # you may have compiled with/without it. Be prepared to recompile all
134 # extensions if you change the default. Currently, this cannot be enabled
135 # if you ask for USE_IMP_SYS above.
137 #PERL_MALLOC = define
140 # set this to enable debugging mstats
141 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
142 # be enabled without PERL_MALLOC as well.
144 #DEBUG_MSTATS = define
148 # set the install locations of the compiler include/libraries
149 # Running VCVARS32.BAT is *required* when using Visual C.
150 # Some versions of Visual C don't define MSVCDIR in the environment,
151 # so you may have to set CCHOME explicitly (spaces in the path name should
156 CCINCDIR = $(CCHOME)\include
157 CCLIBDIR = $(CCHOME)\lib
160 # Additional compiler flags can be specified here.
164 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
165 # for old symbols by default, at the expense of extreme pollution. You most
166 # probably just want to build modules that won't compile with
167 # perl Makefile.PL POLLUTE=1
168 # instead of enabling this. Please report such modules to the respective
171 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
174 # This should normally be disabled. Enabling it will disable the File::Glob
175 # implementation of CORE::glob.
177 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
180 # This should normally be disabled. Enabling it causes perl to read scripts
181 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
182 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
185 # specify semicolon-separated list of extra directories that modules will
186 # look for libraries (spaces in path names need not be quoted)
191 # set this to your email address (perl will guess a value from
192 # from your loginname and your hostname, which may not be right)
197 ## Build configuration ends.
200 ##################### CHANGE THESE ONLY IF YOU MUST #####################
202 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
206 CRYPT_FLAG = -DHAVE_DES_FCRYPT
209 !IF "$(PERL_MALLOC)" == ""
214 !IF "$(DEBUG_MSTATS)" == ""
218 !IF "$(DEBUG_MSTATS)" == "define"
219 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
222 !IF "$(USE_IMP_SYS)" == "define"
226 !IF "$(USE_MULTI)" == ""
230 !IF "$(USE_ITHREADS)" == ""
234 !IF "$(USE_IMP_SYS)" == ""
238 !IF "$(USE_PERLIO)" == ""
242 !IF "$(USE_LARGE_FILES)" == ""
243 USE_LARGE_FILES = undef
246 !IF "$(USE_PERLCRT)" == ""
250 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
254 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
258 !IF "$(USE_MULTI)" != "undef"
259 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
262 !IF "$(USE_IMP_SYS)" != "undef"
263 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
266 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
267 PROCESSOR_ARCHITECTURE = x86
271 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
272 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
275 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
283 !IF "$(USE_MULTI)" == "define"
284 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
286 !IF "$(USE_PERLIO)" == "define"
287 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
289 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
293 !IF "$(USE_PERLIO)" == "define"
294 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
297 !IF "$(USE_ITHREADS)" == "define"
298 ARCHNAME = $(ARCHNAME)-thread
301 # Visual Studio 98 specific
302 !IF "$(CCTYPE)" == "MSVC60"
304 # VC 6.0 can load the socket dll on demand. Makes the test suite
305 # run in about 10% less time.
306 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
309 ARCHDIR = ..\lib\$(ARCHNAME)
310 COREDIR = ..\lib\CORE
311 AUTODIR = ..\lib\auto
315 EXTUTILSDIR = $(LIBDIR)\ExtUtils
318 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
319 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
320 INST_LIB = $(INST_TOP)$(INST_VER)\lib
321 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
322 INST_COREDIR = $(INST_ARCHLIB)\CORE
323 INST_POD = $(INST_LIB)\pod
324 INST_HTML = $(INST_TOP)$(INST_VER)\html
327 # Programs to compile, build .lib files and link
332 LIB32 = $(LINK32) -lib
339 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
340 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
341 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
342 LOCDEFS = -DPERLDLL -DPERL_CORE
346 !IF "$(USE_PERLCRT)" != "define"
352 !IF "$(CFG)" == "Debug"
353 ! IF "$(CCTYPE)" == "MSVC20"
354 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
356 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
360 OPTIMIZE = -MD -Zi -DNDEBUG
361 # we enable debug symbols in release builds also
362 LINK_DBG = -debug -opt:ref,icf
363 # you may want to enable this if you want COFF symbols in the executables
364 # in addition to the PDB symbols. The default Dr. Watson that ships with
365 # Windows can use the the former but not latter. The free WinDbg can be
366 # installed to get better stack traces from just the PDB symbols, so we
367 # avoid the bloat of COFF symbols by default.
368 #LINK_DBG = $(LINK_DBG) -debugtype:both
369 ! IF "$(WIN64)" == "define"
370 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
371 OPTIMIZE = $(OPTIMIZE) -Ox -GL
372 LINK_DBG = $(LINK_DBG) -ltcg
374 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
375 OPTIMIZE = $(OPTIMIZE) -O1
376 #OPTIMIZE = $(OPTIMIZE) -O2
380 !IF "$(WIN64)" == "define"
381 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
382 OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
385 !IF "$(USE_PERLCRT)" != "define"
386 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
389 LIBBASEFILES = $(CRYPT_LIB) \
390 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
391 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
392 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
395 # win64 doesn't have some libs
396 !IF "$(WIN64)" != "define"
397 LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
400 # we add LIBC here, since we may be using PerlCRT.dll
401 LIBFILES = $(LIBBASEFILES) $(LIBC)
403 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
404 $(PCHFLAGS) $(OPTIMIZE)
405 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
406 -libpath:"$(INST_COREDIR)" \
407 -machine:$(PROCESSOR_ARCHITECTURE)
411 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
413 #################### do not edit below this line #######################
414 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
422 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
425 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
431 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
432 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
440 # makedef.pl must be updated if this changes, and this should normally
441 # only change when there is an incompatible revision of the public API.
442 PERLIMPLIB = ..\perl59.lib
443 PERLDLL = ..\perl59.dll
445 MINIPERL = ..\miniperl.exe
447 PERLEXE = ..\perl.exe
448 WPERLEXE = ..\wperl.exe
449 GLOBEXE = ..\perlglob.exe
450 CONFIGPM = ..\lib\Config.pm ..\Config_heavy.pl
451 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
454 # Unicode data files generated by mktables
455 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
456 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
457 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
458 ..\lib\unicore\PVA.pl
460 # Directories of Unicode data files generated by mktables
461 UNIDATADIR1 = ..\lib\unicore\To
462 UNIDATADIR2 = ..\lib\unicore\lib
464 PERLEXE_ICO = .\perlexe.ico
465 PERLEXE_RES = .\perlexe.res
468 # Nominate a target which causes extensions to be re-built
469 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
470 # on and really only the interface - i.e. the .def file used to export symbols
472 PERLDEP = perldll.def
474 PL2BAT = bin\pl2bat.pl
475 GLOBBAT = bin\perlglob.bat
516 !IF "$(WIN64)" == "define"
517 CFGSH_TMPL = config.vc64
518 CFGH_TMPL = config_H.vc64
520 CFGSH_TMPL = config.vc
521 CFGH_TMPL = config_H.vc
524 XCOPY = xcopy /f /r /i /d
525 RCOPY = xcopy /f /r /i /e /d
532 # filenames given to xsubpp must have forward slashes (since it puts
533 # full pathnames in #line strings)
534 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
573 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
575 !IF "$(PERL_MALLOC)" == "define"
576 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
579 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
586 # We need this for miniperl build unless we override canned
587 # config.h #define building mini\*
588 #!IF "$(USE_PERLIO)" == "define"
589 WIN32_SRC = $(WIN32_SRC) .\win32io.c
592 !IF "$(CRYPT_SRC)" != ""
593 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
596 DLL_SRC = $(DYNALOADER).c
642 .\include\sys\socket.h \
645 CORE_H = $(CORE_NOCFG_H) .\config.h
647 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
648 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
649 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
650 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
651 $(MINIDIR)\miniperlmain$(o) \
652 $(MINIDIR)\perlio$(o)
653 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
654 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
655 DLL_OBJ = $(DLL_SRC:.c=.obj)
656 X2P_OBJ = $(X2P_SRC:.c=.obj)
658 PERLDLL_OBJ = $(CORE_OBJ)
659 PERLEXE_OBJ = perlmain$(o)
661 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
662 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
664 !IF "$(USE_SETARGV)" != ""
665 SETARGV_OBJ = setargv$(o)
668 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
669 SOCKET = $(EXTDIR)\Socket\Socket
670 FCNTL = $(EXTDIR)\Fcntl\Fcntl
671 OPCODE = $(EXTDIR)\Opcode\Opcode
672 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
674 POSIX = $(EXTDIR)\POSIX\POSIX
675 ATTRS = $(EXTDIR)\attrs\attrs
676 THREAD = $(EXTDIR)\Thread\Thread
679 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
680 ERRNO = $(EXTDIR)\Errno\Errno
681 PEEK = $(EXTDIR)\Devel\Peek\Peek
682 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
683 DPROF = $(EXTDIR)\Devel\DProf\DProf
684 GLOB = $(EXTDIR)\File\Glob\Glob
685 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
686 STORABLE = $(EXTDIR)\Storable\Storable
687 FILTER = $(EXTDIR)\Filter\Util\Call\Call
688 ENCODE = $(EXTDIR)\Encode\Encode
689 MD5 = $(EXTDIR)\Digest\MD5\MD5
690 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
691 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
692 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
693 CWD = $(EXTDIR)\Cwd\Cwd
694 LISTUTIL = $(EXTDIR)\List\Util\Util
695 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
696 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
697 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
698 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
699 WIN32_DIR = ext\Win32
701 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
702 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
703 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
704 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
705 IO_DLL = $(AUTODIR)\IO\IO.dll
706 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
707 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
708 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
709 B_DLL = $(AUTODIR)\B\B.dll
710 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
711 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
712 RE_DLL = $(AUTODIR)\re\re.dll
713 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
714 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
715 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
716 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
717 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
718 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
719 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
720 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
721 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
722 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
723 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
724 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
725 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
726 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
727 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
728 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
729 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
730 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
761 $(UNICODENORMALIZE).c \
785 $(PERLIOSCALAR_DLL) \
793 $(UNICODENORMALIZE_DLL) \
796 POD2HTML = $(PODDIR)\pod2html
797 POD2MAN = $(PODDIR)\pod2man
798 POD2LATEX = $(PODDIR)\pod2latex
799 POD2TEXT = $(PODDIR)\pod2text
802 "INST_DRV=$(INST_DRV)" \
803 "INST_TOP=$(INST_TOP)" \
804 "INST_VER=$(INST_VER)" \
805 "INST_ARCH=$(INST_ARCH)" \
806 "archname=$(ARCHNAME)" \
809 "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
810 "cf_email=$(EMAIL)" \
811 "d_crypt=$(D_CRYPT)" \
812 "d_mymalloc=$(PERL_MALLOC)" \
814 "incpath=$(CCINCDIR:"=\")" \
815 "libperl=$(PERLIMPLIB:..\=)" \
816 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
818 "make=$(MAKE_BARE)" \
819 "static_ext=$(STATIC_EXT)" \
820 "usethreads=$(USE_ITHREADS)" \
821 "useithreads=$(USE_ITHREADS)" \
822 "usemultiplicity=$(USE_MULTI)" \
823 "useperlio=$(USE_PERLIO)" \
824 "uselargefiles=$(USE_LARGE_FILES)" \
825 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
826 "optimize=$(OPTIMIZE:"=\")"
832 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
834 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
836 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
838 #------------------------------------------------------------
840 $(GLOBEXE) : perlglob$(o)
841 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
842 perlglob$(o) setargv$(o)
844 perlglob$(o) : perlglob.c
846 config.w32 : $(CFGSH_TMPL)
847 copy $(CFGSH_TMPL) config.w32
849 .\config.h : $(CFGH_TMPL)
851 copy $(CFGH_TMPL) config.h
853 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
854 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
856 # this target is for when changes to the main config.sh happen
857 # edit config.{b,v,g}c and make this target once for each supported
858 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
860 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
862 -del /f perl.exe perl*.dll
867 -perl config_h.PL "INST_VER=$(INST_VER)"
868 rename config.h $(CFGH_TMPL)
870 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
874 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
875 $(XCOPY) ..\*.h $(COREDIR)\*.*
876 $(XCOPY) *.h $(COREDIR)\*.*
877 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
878 $(RCOPY) include $(COREDIR)\*.*
879 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
880 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
882 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
883 $(LINK32) -subsystem:console -out:$@ @<<
884 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
888 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
890 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
891 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
893 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
894 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
896 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
897 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
898 !IF "$(USE_IMP_SYS)" == "define"
899 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
900 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
903 # 1. we don't want to rebuild miniperl.exe when config.h changes
904 # 2. we don't want to rebuild miniperl.exe with non-default config.h
905 $(MINI_OBJ) : $(CORE_NOCFG_H)
907 $(WIN32_OBJ) : $(CORE_H)
908 $(CORE_OBJ) : $(CORE_H)
909 $(DLL_OBJ) : $(CORE_H)
910 $(X2P_OBJ) : $(CORE_H)
912 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
913 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
914 CCTYPE=$(CCTYPE) > perldll.def
916 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
917 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
918 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
920 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
922 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
923 $(MINIPERL) makeico.pl > $@
925 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
927 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
929 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
932 ..\x2p\a2p$(o) : ..\x2p\a2p.c
933 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
935 ..\x2p\hash$(o) : ..\x2p\hash.c
936 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
938 ..\x2p\str$(o) : ..\x2p\str.c
939 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
941 ..\x2p\util$(o) : ..\x2p\util.c
942 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
944 ..\x2p\walk$(o) : ..\x2p\walk.c
945 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
947 $(X2P) : $(MINIPERL) $(X2P_OBJ)
948 $(MINIPERL) ..\x2p\find2perl.PL
949 $(MINIPERL) ..\x2p\s2p.PL
950 $(LINK32) -subsystem:console -out:$@ @<<
951 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
954 perlmain.c : runperl.c
955 copy runperl.c perlmain.c
957 perlmain$(o) : perlmain.c
958 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
960 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
961 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
962 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
963 copy $(PERLEXE) $(WPERLEXE)
964 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
966 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
968 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
969 if not exist $(AUTODIR) mkdir $(AUTODIR)
971 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
972 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
974 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
975 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
977 $(XSUBPP) dl_win32.xs > $(*B).c
980 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
981 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
983 #----------------------------------------------------------------------------------
984 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
985 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
986 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext
988 # Note: The next two targets explicitly remove a "blibdirs.exists" file that
989 # currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
992 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
993 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
994 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
996 Extensions_realclean:
997 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
998 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
999 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
1001 #----------------------------------------------------------------------------------
1004 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1005 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1006 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1008 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1009 # so please check that script before making structural changes here
1011 utils: $(PERLEXE) $(X2P)
1013 $(MAKE) PERL=$(MINIPERL)
1015 copy ..\vms\perlvms.pod .\perlvms.pod
1016 copy ..\README.aix ..\pod\perlaix.pod
1017 copy ..\README.amiga ..\pod\perlamiga.pod
1018 copy ..\README.apollo ..\pod\perlapollo.pod
1019 copy ..\README.beos ..\pod\perlbeos.pod
1020 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1021 copy ..\README.ce ..\pod\perlce.pod
1022 copy ..\README.cn ..\pod\perlcn.pod
1023 copy ..\README.cygwin ..\pod\perlcygwin.pod
1024 copy ..\README.dgux ..\pod\perldgux.pod
1025 copy ..\README.dos ..\pod\perldos.pod
1026 copy ..\README.epoc ..\pod\perlepoc.pod
1027 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1028 copy ..\README.hpux ..\pod\perlhpux.pod
1029 copy ..\README.hurd ..\pod\perlhurd.pod
1030 copy ..\README.irix ..\pod\perlirix.pod
1031 copy ..\README.jp ..\pod\perljp.pod
1032 copy ..\README.ko ..\pod\perlko.pod
1033 copy ..\README.machten ..\pod\perlmachten.pod
1034 copy ..\README.macos ..\pod\perlmacos.pod
1035 copy ..\README.macosx ..\pod\perlmacosx.pod
1036 copy ..\README.mint ..\pod\perlmint.pod
1037 copy ..\README.mpeix ..\pod\perlmpeix.pod
1038 copy ..\README.netware ..\pod\perlnetware.pod
1039 copy ..\README.os2 ..\pod\perlos2.pod
1040 copy ..\README.os390 ..\pod\perlos390.pod
1041 copy ..\README.os400 ..\pod\perlos400.pod
1042 copy ..\README.plan9 ..\pod\perlplan9.pod
1043 copy ..\README.qnx ..\pod\perlqnx.pod
1044 copy ..\README.solaris ..\pod\perlsolaris.pod
1045 copy ..\README.tru64 ..\pod\perltru64.pod
1046 copy ..\README.tw ..\pod\perltw.pod
1047 copy ..\README.uts ..\pod\perluts.pod
1048 copy ..\README.vmesa ..\pod\perlvmesa.pod
1049 copy ..\README.vms ..\pod\perlvms.pod
1050 copy ..\README.vos ..\pod\perlvos.pod
1051 copy ..\README.win32 ..\pod\perlwin32.pod
1052 copy ..\pod\perl592delta.pod ..\pod\perldelta.pod
1053 $(MAKE) -f ..\win32\pod.mak converters
1055 $(PERLEXE) lib_pm.PL
1057 $(PERLEXE) $(PL2BAT) $(UTILS)
1059 # Note that the pod cleanup in this next section is parsed (and regenerated
1060 # by pod/buildtoc so please check that script before making changes here
1062 # the doubled rmdir calls are needed because older cmd shells
1063 # don't understand /q
1064 distclean: realclean
1065 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1066 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1068 -del /f $(EXTENSION_DLL)
1069 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1070 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1071 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1072 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1073 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1074 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1075 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1076 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1077 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1078 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1079 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1080 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1081 -del /f $(LIBDIR)\ByteLoader.pm
1082 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1083 -del /f $(LIBDIR)\Devel\PPPort.pm
1084 -del /f $(LIBDIR)\File\Glob.pm
1085 -del /f $(LIBDIR)\Storable.pm
1086 -del /f $(LIBDIR)\Digest\MD5.pm
1087 -del /f $(LIBDIR)\PerlIO\encoding.pm
1088 -del /f $(LIBDIR)\PerlIO\scalar.pm
1089 -del /f $(LIBDIR)\PerlIO\via.pm
1090 -del /f $(LIBDIR)\Sys\Hostname.pm
1091 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1092 -del /f $(LIBDIR)\threads\shared.pm
1093 -del /f $(LIBDIR)\Time\HiRes.pm
1094 -del /f $(LIBDIR)\Unicode\Normalize.pm
1095 -del /f $(LIBDIR)\Win32.pm
1096 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1097 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1098 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1099 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1100 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1101 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1102 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1103 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1104 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1105 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1106 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1107 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1108 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1109 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1110 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1111 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1112 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1113 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1114 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1115 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1116 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1117 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1118 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1119 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1120 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1121 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1122 perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
1123 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1125 pod2html pod2latex pod2man pod2text pod2usage \
1126 podchecker podselect
1127 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1128 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1129 xsubpp instmodsh prove
1130 -cd ..\x2p && del /f find2perl s2p psed *.bat
1131 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1134 -del /f $(PERLEXE_ICO) perl.base
1135 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1136 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1137 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1138 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1139 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1140 -if exist $(COREDIR) rmdir /s $(COREDIR)
1142 install : all installbare installhtml
1145 $(PERLEXE) ..\installperl
1146 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1147 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1148 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1149 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1150 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1153 $(RCOPY) html\*.* $(INST_HTML)\*.*
1155 inst_lib : $(CONFIGPM)
1156 copy splittree.pl ..
1157 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1158 $(RCOPY) ..\lib $(INST_LIB)\*.*
1160 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1161 cd ..\lib\unicore && \
1162 ..\$(MINIPERL) -I.. mktables
1164 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1165 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1166 if exist ..\t\perl.exe del /f ..\t\perl.exe
1167 rename ..\t\miniperl.exe perl.exe
1168 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1171 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1173 test-prep : all utils
1174 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1175 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1176 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1180 $(PERLEXE) -I..\lib harness
1183 test-notty : test-prep
1184 set PERL_SKIP_TTY_TEST=1
1186 $(PERLEXE) -I..\lib harness
1190 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1191 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1192 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1194 $(PERLEXE) -I..\lib harness
1197 # the doubled rmdir calls are needed because older cmd shells
1198 # don't understand /q
1200 -@$(DEL) miniperlmain$(o)
1201 -@$(DEL) $(MINIPERL)
1202 -@$(DEL) perlglob$(o)
1203 -@$(DEL) perlmain$(o)
1208 -@$(DEL) $(WPERLEXE)
1210 -@$(DEL) $(CORE_OBJ)
1211 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1212 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1213 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1214 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1215 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1216 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1217 -@$(DEL) $(UNIDATAFILES)
1218 -@$(DEL) $(WIN32_OBJ)
1221 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1222 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1223 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1227 clean : Extensions_clean _clean
1229 realclean : Extensions_realclean _clean
1231 # Handy way to run perlbug -ok without having to install and run the
1232 # installed perlbug. We don't re-run the tests here - we trust the user.
1233 # Please *don't* use this unless all tests pass.
1234 # If you want to report test failures, use "nmake nok" instead.
1236 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1239 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1242 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1245 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok