2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual Studio 98)
99 # Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
101 # Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
103 # Visual C++ Toolkit 2005 (free version of Visual C++ 8.x command-line tools)
105 # Visual C++ 8.x (aka Visual Studio 2005) (full version)
109 # uncomment next line if you want debug version of perl (big,slow)
110 # If not enabled, we automatically try to use maximum optimization
111 # with all compilers that are known to have a working optimizer.
116 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
117 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
118 # This currently requires VC 5.0 with Service Pack 3 or later.
119 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
120 # and follow the directions in the package to install.
122 # Not recommended if you have VC 6.x and you're not running Windows 9x.
124 #USE_PERLCRT = define
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # if you want to have the crypt() builtin function implemented, leave this or
137 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
138 # version of des_fcrypt().
143 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
144 # library, uncomment this, and make sure the library exists (see README.win32)
145 # Specify the full pathname of the library.
147 #CRYPT_LIB = fcrypt.lib
150 # set this if you wish to use perl's malloc
151 # WARNING: Turning this on/off WILL break binary compatibility with extensions
152 # you may have compiled with/without it. Be prepared to recompile all
153 # extensions if you change the default. Currently, this cannot be enabled
154 # if you ask for USE_IMP_SYS above.
156 #PERL_MALLOC = define
159 # set this to enable debugging mstats
160 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
161 # be enabled without PERL_MALLOC as well.
163 #DEBUG_MSTATS = define
167 # set the install locations of the compiler include/libraries
168 # Running VCVARS32.BAT is *required* when using Visual C.
169 # Some versions of Visual C don't define MSVCDIR in the environment,
170 # so you may have to set CCHOME explicitly (spaces in the path name should
175 CCINCDIR = $(CCHOME)\include
176 CCLIBDIR = $(CCHOME)\lib
179 # Additional compiler flags can be specified here.
181 BUILDOPT = $(BUILDOPTEXTRA)
184 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
185 # internal hash function unless the PERL_HASH_SEED environment variable is set.
186 # Alternatively, adding -DNO_HASH_SEED will completely disable the
187 # randomization feature.
188 # The latter is required to maintain binary compatibility with Perl 5.8.0.
190 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
191 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
194 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
195 # for old symbols by default, at the expense of extreme pollution. You most
196 # probably just want to build modules that won't compile with
197 # perl Makefile.PL POLLUTE=1
198 # instead of enabling this. Please report such modules to the respective
201 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
204 # This should normally be disabled. Enabling it will disable the File::Glob
205 # implementation of CORE::glob.
207 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
210 # This should normally be disabled. Enabling it causes perl to read scripts
211 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
213 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
216 # specify semicolon-separated list of extra directories that modules will
217 # look for libraries (spaces in path names need not be quoted)
222 # set this to your email address (perl will guess a value from
223 # from your loginname and your hostname, which may not be right)
228 ## Build configuration ends.
231 ##################### CHANGE THESE ONLY IF YOU MUST #####################
233 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
237 CRYPT_FLAG = -DHAVE_DES_FCRYPT
240 !IF "$(USE_IMP_SYS)" == "define"
245 !IF "$(PERL_MALLOC)" == ""
250 !IF "$(DEBUG_MSTATS)" == ""
254 !IF "$(DEBUG_MSTATS)" == "define"
255 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
258 !IF "$(USE_SITECUST)" == ""
262 !IF "$(USE_MULTI)" == ""
266 !IF "$(USE_ITHREADS)" == ""
270 !IF "$(USE_IMP_SYS)" == ""
274 !IF "$(USE_PERLIO)" == ""
278 !IF "$(USE_LARGE_FILES)" == ""
279 USE_LARGE_FILES = undef
282 !IF "$(USE_PERLCRT)" == ""
286 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
290 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
294 !IF "$(USE_SITECUST)" == "define"
295 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
298 !IF "$(USE_MULTI)" != "undef"
299 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
302 !IF "$(USE_IMP_SYS)" != "undef"
303 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
306 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
307 PROCESSOR_ARCHITECTURE = x86
311 # When we are running from a 32bit cmd.exe on AMD64 then
312 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
314 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
315 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
318 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
326 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
327 !IF "$(ARCHITECTURE)" == "AMD64"
330 !IF "$(ARCHITECTURE)" == "IA64"
334 !IF "$(USE_MULTI)" == "define"
335 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
337 !IF "$(USE_PERLIO)" == "define"
338 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
340 ARCHNAME = MSWin32-$(ARCHITECTURE)
344 !IF "$(USE_PERLIO)" == "define"
345 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
348 !IF "$(USE_ITHREADS)" == "define"
349 ARCHNAME = $(ARCHNAME)-thread
352 # Visual Studio 98 and .NET 2003 specific
353 # VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
354 # about 10% less time. (The free version of 7.x can't do this, however.)
355 # The addition of VC++ 8.x is currently an educated guess.
356 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC80"
357 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
360 ARCHDIR = ..\lib\$(ARCHNAME)
361 COREDIR = ..\lib\CORE
362 AUTODIR = ..\lib\auto
366 EXTUTILSDIR = $(LIBDIR)\ExtUtils
370 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
371 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
372 INST_LIB = $(INST_TOP)$(INST_VER)\lib
373 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
374 INST_COREDIR = $(INST_ARCHLIB)\CORE
375 INST_HTML = $(INST_TOP)$(INST_VER)\html
378 # Programs to compile, build .lib files and link
383 LIB32 = $(LINK32) -lib
390 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
391 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
392 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
393 LOCDEFS = -DPERLDLL -DPERL_CORE
397 !IF "$(USE_PERLCRT)" != "define"
403 !IF "$(CFG)" == "Debug"
404 ! IF "$(CCTYPE)" == "MSVC20"
405 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
407 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
411 OPTIMIZE = -MD -Zi -DNDEBUG
412 # we enable debug symbols in release builds also
413 LINK_DBG = -debug -opt:ref,icf
414 # you may want to enable this if you want COFF symbols in the executables
415 # in addition to the PDB symbols. The default Dr. Watson that ships with
416 # Windows can use the the former but not latter. The free WinDbg can be
417 # installed to get better stack traces from just the PDB symbols, so we
418 # avoid the bloat of COFF symbols by default.
419 #LINK_DBG = $(LINK_DBG) -debugtype:both
420 ! IF "$(WIN64)" == "define"
421 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
422 OPTIMIZE = $(OPTIMIZE) -Ox -GL
423 LINK_DBG = $(LINK_DBG) -ltcg
425 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
426 OPTIMIZE = $(OPTIMIZE) -O1
427 #OPTIMIZE = $(OPTIMIZE) -O2
431 !IF "$(WIN64)" == "define"
432 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
433 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
436 !IF "$(USE_PERLCRT)" != "define"
437 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
440 LIBBASEFILES = $(CRYPT_LIB) \
441 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
442 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
443 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
444 version.lib odbc32.lib odbccp32.lib
446 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
447 # include the buffer overrun verification code used by the /GS switch.
448 # Since the code links against libraries that are compiled with /GS, this
449 # "security cookie verification" must be included via bufferoverlow.lib.
450 !IF "$(WIN64)" == "define"
451 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
454 # we add LIBC here, since we may be using PerlCRT.dll
455 LIBFILES = $(LIBBASEFILES) $(LIBC)
457 EXTRACFLAGS = -nologo -GF -W3
458 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
459 $(PCHFLAGS) $(OPTIMIZE)
460 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
461 -libpath:"$(INST_COREDIR)" \
462 -machine:$(PROCESSOR_ARCHITECTURE)
466 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
468 #################### do not edit below this line #######################
469 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
477 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
480 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
486 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
487 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
495 # makedef.pl must be updated if this changes, and this should normally
496 # only change when there is an incompatible revision of the public API.
497 PERLIMPLIB = ..\perl59.lib
498 PERLDLL = ..\perl59.dll
500 MINIPERL = ..\miniperl.exe
502 PERLEXE = ..\perl.exe
503 WPERLEXE = ..\wperl.exe
504 GLOBEXE = ..\perlglob.exe
505 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
506 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
509 # With the .NET 2.0 SDK, setargs.obj is not available with the .NET SDK. It
510 # only comes with Visual Studio 2005.
511 !IF "$(CCTYPE)" != "MSVC80FREE"
515 # Unicode data files generated by mktables
516 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
517 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
518 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
519 ..\lib\unicore\PVA.pl
521 # Directories of Unicode data files generated by mktables
522 UNIDATADIR1 = ..\lib\unicore\To
523 UNIDATADIR2 = ..\lib\unicore\lib
525 PERLEXE_ICO = .\perlexe.ico
526 PERLEXE_RES = .\perlexe.res
529 # Nominate a target which causes extensions to be re-built
530 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
531 # on and really only the interface - i.e. the .def file used to export symbols
533 PERLDEP = perldll.def
535 PL2BAT = bin\pl2bat.pl
536 GLOBBAT = bin\perlglob.bat
553 ..\utils\config_data \
582 !IF "$(WIN64)" == "define"
583 CFGSH_TMPL = config.vc64
584 CFGH_TMPL = config_H.vc64
586 CFGSH_TMPL = config.vc
587 CFGH_TMPL = config_H.vc
590 XCOPY = xcopy /f /r /i /d /y
591 RCOPY = xcopy /f /r /i /e /d /y
598 # filenames given to xsubpp must have forward slashes (since it puts
599 # full pathnames in #line strings)
600 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
640 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
642 !IF "$(PERL_MALLOC)" == "define"
643 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
646 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
653 # We need this for miniperl build unless we override canned
654 # config.h #define building mini\*
655 #!IF "$(USE_PERLIO)" == "define"
656 WIN32_SRC = $(WIN32_SRC) .\win32io.c
659 !IF "$(CRYPT_SRC)" != ""
660 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
663 DLL_SRC = $(DYNALOADER).c
710 .\include\sys\socket.h \
713 CORE_H = $(CORE_NOCFG_H) .\config.h
715 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
716 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
717 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
718 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
719 $(MINIDIR)\miniperlmain$(o) \
720 $(MINIDIR)\perlio$(o)
721 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
722 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
723 DLL_OBJ = $(DLL_SRC:.c=.obj)
724 X2P_OBJ = $(X2P_SRC:.c=.obj)
726 PERLDLL_OBJ = $(CORE_OBJ)
727 PERLEXE_OBJ = perlmain$(o)
729 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
730 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
732 !IF "$(USE_SETARGV)" != ""
733 SETARGV_OBJ = setargv$(o)
736 # specify static extensions here
737 #STATIC_EXT = Cwd Compress/Zlib
740 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
741 SOCKET = $(EXTDIR)\Socket\Socket
742 FCNTL = $(EXTDIR)\Fcntl\Fcntl
743 OPCODE = $(EXTDIR)\Opcode\Opcode
744 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
746 POSIX = $(EXTDIR)\POSIX\POSIX
747 ATTRS = $(EXTDIR)\attrs\attrs
748 THREAD = $(EXTDIR)\Thread\Thread
751 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
752 ERRNO = $(EXTDIR)\Errno\Errno
753 PEEK = $(EXTDIR)\Devel\Peek\Peek
754 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
755 DPROF = $(EXTDIR)\Devel\DProf\DProf
756 GLOB = $(EXTDIR)\File\Glob\Glob
757 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
758 STORABLE = $(EXTDIR)\Storable\Storable
759 FILTER = $(EXTDIR)\Filter\Util\Call\Call
760 ENCODE = $(EXTDIR)\Encode\Encode
761 MD5 = $(EXTDIR)\Digest\MD5\MD5
762 SHA = $(EXTDIR)\Digest\SHA\SHA
763 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
764 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
765 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
766 CWD = $(EXTDIR)\Cwd\Cwd
767 LISTUTIL = $(EXTDIR)\List\Util\Util
768 HASHUTIL = $(EXTDIR)\Hash\Util\Util
769 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
770 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
771 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
772 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
773 MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
774 COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
775 WIN32_DIR = ext\Win32
777 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
778 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
779 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
780 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
781 IO_DLL = $(AUTODIR)\IO\IO.dll
782 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
783 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
784 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
785 B_DLL = $(AUTODIR)\B\B.dll
786 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
787 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
788 RE_DLL = $(AUTODIR)\re\re.dll
789 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
790 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
791 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
792 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
793 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
794 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
795 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
796 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
797 SHA_DLL = $(AUTODIR)\Digest\SHA\SHA.dll
798 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
799 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
800 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
801 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
802 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
803 HASHUTIL_DLL = $(AUTODIR)\HASH\Util\Util.dll
804 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
805 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
806 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
807 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
808 MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
809 COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
810 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
843 $(UNICODENORMALIZE).c \
844 $(MATHBIGINTFASTCALC).c \
870 $(PERLIOSCALAR_DLL) \
879 $(UNICODENORMALIZE_DLL) \
880 $(MATHBIGINTFASTCALC_DLL) \
881 $(COMPRESSZLIB_DLL) \
885 "INST_DRV=$(INST_DRV)" \
886 "INST_TOP=$(INST_TOP)" \
887 "INST_VER=$(INST_VER)" \
888 "INST_ARCH=$(INST_ARCH)" \
889 "archname=$(ARCHNAME)" \
892 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
893 "cf_email=$(EMAIL)" \
894 "d_crypt=$(D_CRYPT)" \
895 "d_mymalloc=$(PERL_MALLOC)" \
897 "incpath=$(CCINCDIR:"=\")" \
898 "libperl=$(PERLIMPLIB:..\=)" \
899 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
901 "make=$(MAKE_BARE)" \
902 "static_ext=$(STATIC_EXT)" \
903 "usethreads=$(USE_ITHREADS)" \
904 "useithreads=$(USE_ITHREADS)" \
905 "usemultiplicity=$(USE_MULTI)" \
906 "useperlio=$(USE_PERLIO)" \
907 "uselargefiles=$(USE_LARGE_FILES)" \
908 "usesitecustomize=$(USE_SITECUST)" \
909 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
910 "optimize=$(OPTIMIZE:"=\")"
916 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
918 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
920 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
922 #------------------------------------------------------------
924 $(GLOBEXE) : perlglob$(o)
926 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
927 perlglob$(o) setargv$(o)
929 echo Skipping $(GLOBEXE)
932 perlglob$(o) : perlglob.c
934 config.w32 : $(CFGSH_TMPL)
935 copy $(CFGSH_TMPL) config.w32
937 .\config.h : $(CFGH_TMPL)
939 copy $(CFGH_TMPL) config.h
941 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
942 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
944 # this target is for when changes to the main config.sh happen
945 # edit config.{b,v,g}c and make this target once for each supported
946 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
948 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
950 -del /f perl.exe perl*.dll
955 -perl config_h.PL "INST_VER=$(INST_VER)"
956 rename config.h $(CFGH_TMPL)
958 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
962 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
963 $(XCOPY) ..\*.h $(COREDIR)\*.*
964 $(XCOPY) *.h $(COREDIR)\*.*
965 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
966 $(RCOPY) include $(COREDIR)\*.*
967 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
968 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
970 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
971 $(LINK32) -subsystem:console -out:$@ @<<
972 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
976 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
978 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
979 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
981 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
982 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
984 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
985 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
986 !IF "$(USE_IMP_SYS)" == "define"
987 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
988 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
991 # 1. we don't want to rebuild miniperl.exe when config.h changes
992 # 2. we don't want to rebuild miniperl.exe with non-default config.h
993 $(MINI_OBJ) : $(CORE_NOCFG_H)
995 $(WIN32_OBJ) : $(CORE_H)
996 $(CORE_OBJ) : $(CORE_H)
997 $(DLL_OBJ) : $(CORE_H)
998 $(X2P_OBJ) : $(CORE_H)
1000 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1001 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1002 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
1003 CCTYPE=$(CCTYPE) > perldll.def
1005 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1006 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
1007 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
1009 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1011 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1012 $(MINIPERL) makeico.pl > $@
1014 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1016 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1018 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1021 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1022 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1024 ..\x2p\hash$(o) : ..\x2p\hash.c
1025 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1027 ..\x2p\str$(o) : ..\x2p\str.c
1028 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1030 ..\x2p\util$(o) : ..\x2p\util.c
1031 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1033 ..\x2p\walk$(o) : ..\x2p\walk.c
1034 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1036 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1037 $(MINIPERL) ..\x2p\find2perl.PL
1038 $(MINIPERL) ..\x2p\s2p.PL
1039 $(LINK32) -subsystem:console -out:$@ @<<
1040 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1043 perlmain.c : runperl.c
1044 copy runperl.c perlmain.c
1046 perlmain$(o) : perlmain.c
1047 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1049 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1050 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1051 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1052 copy $(PERLEXE) $(WPERLEXE)
1053 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1054 copy splittree.pl ..
1055 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1057 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1058 if not exist $(AUTODIR) mkdir $(AUTODIR)
1060 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1061 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1063 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1064 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1066 $(XSUBPP) dl_win32.xs > $(*B).c
1069 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1070 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1072 #-------------------------------------------------------------------------------
1073 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1074 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1075 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1077 Extensions_static : buildext.pl
1078 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1079 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1080 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1083 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1084 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1086 Extensions_realclean:
1087 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1088 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1090 #-------------------------------------------------------------------------------
1093 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1094 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1095 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1097 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1098 # so please check that script before making structural changes here
1100 utils: $(PERLEXE) $(X2P)
1102 $(MAKE) PERL=$(MINIPERL)
1104 copy ..\vms\perlvms.pod .\perlvms.pod
1105 copy ..\README.aix ..\pod\perlaix.pod
1106 copy ..\README.amiga ..\pod\perlamiga.pod
1107 copy ..\README.apollo ..\pod\perlapollo.pod
1108 copy ..\README.beos ..\pod\perlbeos.pod
1109 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1110 copy ..\README.ce ..\pod\perlce.pod
1111 copy ..\README.cn ..\pod\perlcn.pod
1112 copy ..\README.cygwin ..\pod\perlcygwin.pod
1113 copy ..\README.dgux ..\pod\perldgux.pod
1114 copy ..\README.dos ..\pod\perldos.pod
1115 copy ..\README.epoc ..\pod\perlepoc.pod
1116 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1117 copy ..\README.hpux ..\pod\perlhpux.pod
1118 copy ..\README.hurd ..\pod\perlhurd.pod
1119 copy ..\README.irix ..\pod\perlirix.pod
1120 copy ..\README.jp ..\pod\perljp.pod
1121 copy ..\README.ko ..\pod\perlko.pod
1122 copy ..\README.linux ..\pod\perllinux.pod
1123 copy ..\README.machten ..\pod\perlmachten.pod
1124 copy ..\README.macos ..\pod\perlmacos.pod
1125 copy ..\README.macosx ..\pod\perlmacosx.pod
1126 copy ..\README.mint ..\pod\perlmint.pod
1127 copy ..\README.mpeix ..\pod\perlmpeix.pod
1128 copy ..\README.netware ..\pod\perlnetware.pod
1129 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1130 copy ..\README.os2 ..\pod\perlos2.pod
1131 copy ..\README.os390 ..\pod\perlos390.pod
1132 copy ..\README.os400 ..\pod\perlos400.pod
1133 copy ..\README.plan9 ..\pod\perlplan9.pod
1134 copy ..\README.qnx ..\pod\perlqnx.pod
1135 copy ..\README.solaris ..\pod\perlsolaris.pod
1136 copy ..\README.symbian ..\pod\perlsymbian.pod
1137 copy ..\README.tru64 ..\pod\perltru64.pod
1138 copy ..\README.tw ..\pod\perltw.pod
1139 copy ..\README.uts ..\pod\perluts.pod
1140 copy ..\README.vmesa ..\pod\perlvmesa.pod
1141 copy ..\README.vms ..\pod\perlvms.pod
1142 copy ..\README.vos ..\pod\perlvos.pod
1143 copy ..\README.win32 ..\pod\perlwin32.pod
1144 copy ..\pod\perl594delta.pod ..\pod\perldelta.pod
1145 $(MAKE) -f ..\win32\pod.mak converters
1147 $(PERLEXE) lib_pm.PL
1149 $(PERLEXE) $(PL2BAT) $(UTILS)
1151 # Note that the pod cleanup in this next section is parsed (and regenerated
1152 # by pod/buildtoc so please check that script before making changes here
1154 distclean: realclean
1155 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1156 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1158 -del /f $(EXTENSION_DLL)
1159 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1160 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1161 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1162 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1163 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1164 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1165 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1166 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1167 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1168 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1169 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1170 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1171 -del /f $(LIBDIR)\ByteLoader.pm
1172 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1173 -del /f $(LIBDIR)\Devel\PPPort.pm
1174 -del /f $(LIBDIR)\File\Glob.pm
1175 -del /f $(LIBDIR)\Storable.pm
1176 -del /f $(LIBDIR)\Digest\MD5.pm
1177 -del /f $(LIBDIR)\Digest\SHA.pm
1178 -del /f $(LIBDIR)\PerlIO\encoding.pm
1179 -del /f $(LIBDIR)\PerlIO\scalar.pm
1180 -del /f $(LIBDIR)\PerlIO\via.pm
1181 -del /f $(LIBDIR)\Sys\Hostname.pm
1182 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1183 -del /f $(LIBDIR)\threads\shared.pm
1184 -del /f $(LIBDIR)\Time\HiRes.pm
1185 -del /f $(LIBDIR)\Unicode\Normalize.pm
1186 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1187 -del /f $(LIBDIR)\Win32.pm
1188 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1189 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1190 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1191 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1192 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1193 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1194 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1195 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1196 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1197 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1198 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1199 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1200 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1201 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1202 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1203 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1204 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1205 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1206 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1207 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1208 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1209 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1210 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1211 perlos400.pod perlplan9.pod perlqnx.pod perlsolaris.pod \
1212 perlsymbian.pod perltru64.pod perltw.pod perluts.pod \
1213 perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod perlwin32.pod \
1214 pod2html pod2latex pod2man pod2text pod2usage \
1215 podchecker podselect
1216 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1217 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1218 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1219 -cd ..\x2p && del /f find2perl s2p psed *.bat
1220 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1224 -del /f $(PERLEXE_ICO) perl.base
1225 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1226 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1227 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1228 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1229 -if exist pod2htmd.tmp del pod2htmd.tmp
1230 -if exist pod2htmi.tmp del pod2htmi.tmp
1231 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1233 install : all installbare installhtml
1236 $(PERLEXE) ..\installperl
1237 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1238 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1239 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1240 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1241 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1244 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1246 inst_lib : $(CONFIGPM)
1247 copy splittree.pl ..
1248 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1249 $(RCOPY) ..\lib $(INST_LIB)\*.*
1251 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1252 cd ..\lib\unicore && \
1253 ..\$(MINIPERL) -I.. mktables
1255 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1256 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1257 if exist ..\t\perl.exe del /f ..\t\perl.exe
1258 rename ..\t\miniperl.exe perl.exe
1259 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1262 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1264 test-prep : all utils
1265 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1266 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1267 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1271 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1274 test-notty : test-prep
1275 set PERL_SKIP_TTY_TEST=1
1277 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1281 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1282 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1283 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1285 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1289 -@$(DEL) miniperlmain$(o)
1290 -@$(DEL) $(MINIPERL)
1291 -@$(DEL) perlglob$(o)
1292 -@$(DEL) perlmain$(o)
1297 -@$(DEL) $(WPERLEXE)
1299 -@$(DEL) $(CORE_OBJ)
1300 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1301 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1302 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1303 -@$(DEL) $(UNIDATAFILES)
1304 -@$(DEL) $(WIN32_OBJ)
1307 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1308 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1309 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1312 -@$(DEL) Extensions_static
1314 clean : Extensions_clean _clean
1316 realclean : Extensions_realclean _clean
1318 # Handy way to run perlbug -ok without having to install and run the
1319 # installed perlbug. We don't re-run the tests here - we trust the user.
1320 # Please *don't* use this unless all tests pass.
1321 # If you want to report test failures, use "nmake nok" instead.
1323 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1326 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1329 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1332 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok