2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual Studio 98)
99 # Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
101 # Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
103 # Visual C++ Toolkit 2005 (free version of Visual C++ 8.x command-line tools)
105 # Visual C++ 8.x (aka Visual Studio 2005) (full version)
109 # uncomment next line if you want debug version of perl (big,slow)
110 # If not enabled, we automatically try to use maximum optimization
111 # with all compilers that are known to have a working optimizer.
116 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
117 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
118 # This currently requires VC 5.0 with Service Pack 3 or later.
119 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
120 # and follow the directions in the package to install.
122 # Not recommended if you have VC 6.x and you're not running Windows 9x.
124 #USE_PERLCRT = define
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # if you want to have the crypt() builtin function implemented, leave this or
137 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
138 # version of des_fcrypt().
143 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
144 # library, uncomment this, and make sure the library exists (see README.win32)
145 # Specify the full pathname of the library.
147 #CRYPT_LIB = fcrypt.lib
150 # set this if you wish to use perl's malloc
151 # WARNING: Turning this on/off WILL break binary compatibility with extensions
152 # you may have compiled with/without it. Be prepared to recompile all
153 # extensions if you change the default. Currently, this cannot be enabled
154 # if you ask for USE_IMP_SYS above.
156 #PERL_MALLOC = define
159 # set this to enable debugging mstats
160 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
161 # be enabled without PERL_MALLOC as well.
163 #DEBUG_MSTATS = define
167 # set the install locations of the compiler include/libraries
168 # Running VCVARS32.BAT is *required* when using Visual C.
169 # Some versions of Visual C don't define MSVCDIR in the environment,
170 # so you may have to set CCHOME explicitly (spaces in the path name should
175 CCINCDIR = $(CCHOME)\include
176 CCLIBDIR = $(CCHOME)\lib
179 # Additional compiler flags can be specified here.
181 BUILDOPT = $(BUILDOPTEXTRA)
184 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
185 # internal hash function unless the PERL_HASH_SEED environment variable is set.
186 # Alternatively, adding -DNO_HASH_SEED will completely disable the
187 # randomization feature.
188 # The latter is required to maintain binary compatibility with Perl 5.8.0.
190 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
191 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
194 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
195 # for old symbols by default, at the expense of extreme pollution. You most
196 # probably just want to build modules that won't compile with
197 # perl Makefile.PL POLLUTE=1
198 # instead of enabling this. Please report such modules to the respective
201 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
204 # This should normally be disabled. Enabling it will disable the File::Glob
205 # implementation of CORE::glob.
207 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
210 # This should normally be disabled. Enabling it causes perl to read scripts
211 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
213 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
216 # specify semicolon-separated list of extra directories that modules will
217 # look for libraries (spaces in path names need not be quoted)
222 # set this to your email address (perl will guess a value from
223 # from your loginname and your hostname, which may not be right)
228 ## Build configuration ends.
231 ##################### CHANGE THESE ONLY IF YOU MUST #####################
233 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
237 CRYPT_FLAG = -DHAVE_DES_FCRYPT
240 !IF "$(USE_IMP_SYS)" == "define"
245 !IF "$(PERL_MALLOC)" == ""
250 !IF "$(DEBUG_MSTATS)" == ""
254 !IF "$(DEBUG_MSTATS)" == "define"
255 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
258 !IF "$(USE_SITECUST)" == ""
262 !IF "$(USE_MULTI)" == ""
266 !IF "$(USE_ITHREADS)" == ""
270 !IF "$(USE_IMP_SYS)" == ""
274 !IF "$(USE_PERLIO)" == ""
278 !IF "$(USE_LARGE_FILES)" == ""
279 USE_LARGE_FILES = undef
282 !IF "$(USE_PERLCRT)" == ""
286 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
290 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
294 !IF "$(USE_SITECUST)" == "define"
295 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
298 !IF "$(USE_MULTI)" != "undef"
299 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
302 !IF "$(USE_IMP_SYS)" != "undef"
303 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
306 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
307 PROCESSOR_ARCHITECTURE = x86
311 # When we are running from a 32bit cmd.exe on AMD64 then
312 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
314 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
315 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
318 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
326 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
327 !IF "$(ARCHITECTURE)" == "AMD64"
330 !IF "$(ARCHITECTURE)" == "IA64"
334 !IF "$(USE_MULTI)" == "define"
335 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
337 !IF "$(USE_PERLIO)" == "define"
338 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
340 ARCHNAME = MSWin32-$(ARCHITECTURE)
344 !IF "$(USE_PERLIO)" == "define"
345 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
348 !IF "$(USE_ITHREADS)" == "define"
349 ARCHNAME = $(ARCHNAME)-thread
352 # Visual Studio 98 and .NET 2003 specific
353 # VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
354 # about 10% less time. (The free version of 7.x can't do this, however.)
355 # The addition of VC++ 8.x is currently an educated guess.
356 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC80"
357 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
360 ARCHDIR = ..\lib\$(ARCHNAME)
361 COREDIR = ..\lib\CORE
362 AUTODIR = ..\lib\auto
366 EXTUTILSDIR = $(LIBDIR)\ExtUtils
370 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
371 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
372 INST_LIB = $(INST_TOP)$(INST_VER)\lib
373 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
374 INST_COREDIR = $(INST_ARCHLIB)\CORE
375 INST_HTML = $(INST_TOP)$(INST_VER)\html
378 # Programs to compile, build .lib files and link
383 LIB32 = $(LINK32) -lib
390 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
391 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
392 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
393 LOCDEFS = -DPERLDLL -DPERL_CORE
397 !IF "$(USE_PERLCRT)" != "define"
403 !IF "$(CFG)" == "Debug"
404 ! IF "$(CCTYPE)" == "MSVC20"
405 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
407 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
411 OPTIMIZE = -MD -Zi -DNDEBUG
412 # we enable debug symbols in release builds also
413 LINK_DBG = -debug -opt:ref,icf
414 # you may want to enable this if you want COFF symbols in the executables
415 # in addition to the PDB symbols. The default Dr. Watson that ships with
416 # Windows can use the the former but not latter. The free WinDbg can be
417 # installed to get better stack traces from just the PDB symbols, so we
418 # avoid the bloat of COFF symbols by default.
419 #LINK_DBG = $(LINK_DBG) -debugtype:both
420 ! IF "$(WIN64)" == "define"
421 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
422 OPTIMIZE = $(OPTIMIZE) -Ox -GL
423 LINK_DBG = $(LINK_DBG) -ltcg
425 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
426 OPTIMIZE = $(OPTIMIZE) -O1
427 #OPTIMIZE = $(OPTIMIZE) -O2
431 !IF "$(WIN64)" == "define"
432 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
433 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
436 !IF "$(USE_PERLCRT)" != "define"
437 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
440 LIBBASEFILES = $(CRYPT_LIB) \
441 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
442 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
443 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
444 version.lib odbc32.lib odbccp32.lib
446 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
447 # include the buffer overrun verification code used by the /GS switch.
448 # Since the code links against libraries that are compiled with /GS, this
449 # "security cookie verification" must be included via bufferoverlow.lib.
450 !IF "$(WIN64)" == "define"
451 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
454 # we add LIBC here, since we may be using PerlCRT.dll
455 LIBFILES = $(LIBBASEFILES) $(LIBC)
457 EXTRACFLAGS = -nologo -GF -W3
458 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
459 $(PCHFLAGS) $(OPTIMIZE)
460 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
461 -libpath:"$(INST_COREDIR)" \
462 -machine:$(PROCESSOR_ARCHITECTURE)
466 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
468 #################### do not edit below this line #######################
469 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
477 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
480 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
486 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
487 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
495 # makedef.pl must be updated if this changes, and this should normally
496 # only change when there is an incompatible revision of the public API.
497 PERLIMPLIB = ..\perl59.lib
498 PERLDLL = ..\perl59.dll
500 MINIPERL = ..\miniperl.exe
502 PERLEXE = ..\perl.exe
503 WPERLEXE = ..\wperl.exe
504 GLOBEXE = ..\perlglob.exe
505 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
506 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
509 # With the .NET 2.0 SDK, setargs.obj is not available with the .NET SDK. It
510 # only comes with Visual Studio 2005.
511 !IF "$(CCTYPE)" != "MSVC80FREE"
515 # Unicode data files generated by mktables
516 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
517 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
518 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
519 ..\lib\unicore\PVA.pl
521 # Directories of Unicode data files generated by mktables
522 UNIDATADIR1 = ..\lib\unicore\To
523 UNIDATADIR2 = ..\lib\unicore\lib
525 PERLEXE_ICO = .\perlexe.ico
526 PERLEXE_RES = .\perlexe.res
529 # Nominate a target which causes extensions to be re-built
530 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
531 # on and really only the interface - i.e. the .def file used to export symbols
533 PERLDEP = perldll.def
535 PL2BAT = bin\pl2bat.pl
536 GLOBBAT = bin\perlglob.bat
553 ..\utils\config_data \
582 !IF "$(WIN64)" == "define"
583 CFGSH_TMPL = config.vc64
584 CFGH_TMPL = config_H.vc64
586 CFGSH_TMPL = config.vc
587 CFGH_TMPL = config_H.vc
590 XCOPY = xcopy /f /r /i /d /y
591 RCOPY = xcopy /f /r /i /e /d /y
598 # filenames given to xsubpp must have forward slashes (since it puts
599 # full pathnames in #line strings)
600 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
640 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
642 !IF "$(PERL_MALLOC)" == "define"
643 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
646 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
653 # We need this for miniperl build unless we override canned
654 # config.h #define building mini\*
655 #!IF "$(USE_PERLIO)" == "define"
656 WIN32_SRC = $(WIN32_SRC) .\win32io.c
659 !IF "$(CRYPT_SRC)" != ""
660 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
663 DLL_SRC = $(DYNALOADER).c
710 .\include\sys\socket.h \
713 CORE_H = $(CORE_NOCFG_H) .\config.h
715 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
716 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
717 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
718 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
719 $(MINIDIR)\miniperlmain$(o) \
720 $(MINIDIR)\perlio$(o)
721 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
722 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
723 DLL_OBJ = $(DLL_SRC:.c=.obj)
724 X2P_OBJ = $(X2P_SRC:.c=.obj)
726 PERLDLL_OBJ = $(CORE_OBJ)
727 PERLEXE_OBJ = perlmain$(o)
729 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
730 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
732 !IF "$(USE_SETARGV)" != ""
733 SETARGV_OBJ = setargv$(o)
736 # specify static extensions here
737 #STATIC_EXT = Cwd Compress/Zlib
740 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
741 SOCKET = $(EXTDIR)\Socket\Socket
742 FCNTL = $(EXTDIR)\Fcntl\Fcntl
743 OPCODE = $(EXTDIR)\Opcode\Opcode
744 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
746 POSIX = $(EXTDIR)\POSIX\POSIX
747 ATTRS = $(EXTDIR)\attrs\attrs
748 THREAD = $(EXTDIR)\Thread\Thread
751 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
752 ERRNO = $(EXTDIR)\Errno\Errno
753 PEEK = $(EXTDIR)\Devel\Peek\Peek
754 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
755 DPROF = $(EXTDIR)\Devel\DProf\DProf
756 GLOB = $(EXTDIR)\File\Glob\Glob
757 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
758 STORABLE = $(EXTDIR)\Storable\Storable
759 FILTER = $(EXTDIR)\Filter\Util\Call\Call
760 ENCODE = $(EXTDIR)\Encode\Encode
761 MD5 = $(EXTDIR)\Digest\MD5\MD5
762 SHA = $(EXTDIR)\Digest\SHA\SHA
763 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
764 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
765 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
766 CWD = $(EXTDIR)\Cwd\Cwd
767 LISTUTIL = $(EXTDIR)\List\Util\Util
768 HASHUTIL = $(EXTDIR)\Hash\Util\Util
769 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
770 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
771 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
772 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
773 MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
774 COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
775 WIN32_DIR = ext\Win32
776 WIN32APIFILE = ext\Win32API\File\File
778 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
779 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
780 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
781 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
782 IO_DLL = $(AUTODIR)\IO\IO.dll
783 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
784 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
785 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
786 B_DLL = $(AUTODIR)\B\B.dll
787 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
788 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
789 RE_DLL = $(AUTODIR)\re\re.dll
790 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
791 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
792 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
793 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
794 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
795 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
796 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
797 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
798 SHA_DLL = $(AUTODIR)\Digest\SHA\SHA.dll
799 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
800 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
801 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
802 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
803 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
804 HASHUTIL_DLL = $(AUTODIR)\HASH\Util\Util.dll
805 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
806 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
807 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
808 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
809 MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
810 COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
811 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
812 WIN32APIFILE_DLL = $(AUTODIR)\Win32API\File\File.dll
845 $(UNICODENORMALIZE).c \
846 $(MATHBIGINTFASTCALC).c \
873 $(PERLIOSCALAR_DLL) \
882 $(UNICODENORMALIZE_DLL) \
883 $(MATHBIGINTFASTCALC_DLL) \
884 $(COMPRESSZLIB_DLL) \
889 "INST_DRV=$(INST_DRV)" \
890 "INST_TOP=$(INST_TOP)" \
891 "INST_VER=$(INST_VER)" \
892 "INST_ARCH=$(INST_ARCH)" \
893 "archname=$(ARCHNAME)" \
896 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
897 "cf_email=$(EMAIL)" \
898 "d_crypt=$(D_CRYPT)" \
899 "d_mymalloc=$(PERL_MALLOC)" \
901 "incpath=$(CCINCDIR:"=\")" \
902 "libperl=$(PERLIMPLIB:..\=)" \
903 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
905 "make=$(MAKE_BARE)" \
906 "static_ext=$(STATIC_EXT)" \
907 "usethreads=$(USE_ITHREADS)" \
908 "useithreads=$(USE_ITHREADS)" \
909 "usemultiplicity=$(USE_MULTI)" \
910 "useperlio=$(USE_PERLIO)" \
911 "uselargefiles=$(USE_LARGE_FILES)" \
912 "usesitecustomize=$(USE_SITECUST)" \
913 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
914 "optimize=$(OPTIMIZE:"=\")"
920 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
921 $(X2P) MakePPPort Extensions
922 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
924 reonly : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
925 $(X2P) Extensions_reonly
926 @echo Perl and 're' are up to date.
928 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
930 #------------------------------------------------------------
932 $(GLOBEXE) : perlglob$(o)
934 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
935 perlglob$(o) setargv$(o)
937 echo Skipping $(GLOBEXE)
940 perlglob$(o) : perlglob.c
942 config.w32 : $(CFGSH_TMPL)
943 copy $(CFGSH_TMPL) config.w32
945 .\config.h : $(CFGH_TMPL)
947 copy $(CFGH_TMPL) config.h
949 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
950 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
952 # this target is for when changes to the main config.sh happen
953 # edit config.{b,v,g}c and make this target once for each supported
954 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
956 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
958 -del /f perl.exe perl*.dll
963 -perl config_h.PL "INST_VER=$(INST_VER)"
964 rename config.h $(CFGH_TMPL)
966 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
970 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
971 $(XCOPY) ..\*.h $(COREDIR)\*.*
972 $(XCOPY) *.h $(COREDIR)\*.*
973 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
974 $(RCOPY) include $(COREDIR)\*.*
975 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
976 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
978 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
979 $(LINK32) -subsystem:console -out:$@ @<<
980 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
984 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
986 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
987 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
989 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
990 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
992 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
993 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
994 !IF "$(USE_IMP_SYS)" == "define"
995 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
996 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
999 # 1. we don't want to rebuild miniperl.exe when config.h changes
1000 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1001 $(MINI_OBJ) : $(CORE_NOCFG_H)
1003 $(WIN32_OBJ) : $(CORE_H)
1004 $(CORE_OBJ) : $(CORE_H)
1005 $(DLL_OBJ) : $(CORE_H)
1006 $(X2P_OBJ) : $(CORE_H)
1008 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1009 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1010 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
1011 CCTYPE=$(CCTYPE) > perldll.def
1013 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1014 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
1015 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
1017 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1019 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1020 $(MINIPERL) makeico.pl > $@
1022 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1024 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1026 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1029 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1030 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1032 ..\x2p\hash$(o) : ..\x2p\hash.c
1033 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1035 ..\x2p\str$(o) : ..\x2p\str.c
1036 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1038 ..\x2p\util$(o) : ..\x2p\util.c
1039 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1041 ..\x2p\walk$(o) : ..\x2p\walk.c
1042 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1044 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1045 $(MINIPERL) ..\x2p\find2perl.PL
1046 $(MINIPERL) ..\x2p\s2p.PL
1047 $(LINK32) -subsystem:console -out:$@ @<<
1048 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1051 perlmain.c : runperl.c
1052 copy runperl.c perlmain.c
1054 perlmain$(o) : perlmain.c
1055 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1057 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1058 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1059 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1060 copy $(PERLEXE) $(WPERLEXE)
1061 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1062 copy splittree.pl ..
1063 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1065 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1066 if not exist $(AUTODIR) mkdir $(AUTODIR)
1068 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1069 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1071 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1072 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1074 $(XSUBPP) dl_win32.xs > $(*B).c
1077 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1078 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1080 MakePPPort: $(MINIPERL) $(CONFIGPM)
1081 $(MINIPERL) -I..\lib ..\mkppport
1084 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1086 #-------------------------------------------------------------------------------
1087 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1088 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1089 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1091 Extensions_reonly: buildext.pl $(PERLDEP) $(CONFIGPM)
1092 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1093 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1095 Extensions_static : buildext.pl
1096 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1097 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1098 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1101 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1102 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1104 Extensions_realclean:
1105 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1106 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1108 #-------------------------------------------------------------------------------
1111 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1112 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1113 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1115 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1116 # so please check that script before making structural changes here
1118 utils: $(PERLEXE) $(X2P)
1120 $(MAKE) PERL=$(MINIPERL)
1122 copy ..\vms\perlvms.pod .\perlvms.pod
1123 copy ..\README.aix ..\pod\perlaix.pod
1124 copy ..\README.amiga ..\pod\perlamiga.pod
1125 copy ..\README.apollo ..\pod\perlapollo.pod
1126 copy ..\README.beos ..\pod\perlbeos.pod
1127 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1128 copy ..\README.ce ..\pod\perlce.pod
1129 copy ..\README.cn ..\pod\perlcn.pod
1130 copy ..\README.cygwin ..\pod\perlcygwin.pod
1131 copy ..\README.dgux ..\pod\perldgux.pod
1132 copy ..\README.dos ..\pod\perldos.pod
1133 copy ..\README.epoc ..\pod\perlepoc.pod
1134 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1135 copy ..\README.hpux ..\pod\perlhpux.pod
1136 copy ..\README.hurd ..\pod\perlhurd.pod
1137 copy ..\README.irix ..\pod\perlirix.pod
1138 copy ..\README.jp ..\pod\perljp.pod
1139 copy ..\README.ko ..\pod\perlko.pod
1140 copy ..\README.linux ..\pod\perllinux.pod
1141 copy ..\README.machten ..\pod\perlmachten.pod
1142 copy ..\README.macos ..\pod\perlmacos.pod
1143 copy ..\README.macosx ..\pod\perlmacosx.pod
1144 copy ..\README.mint ..\pod\perlmint.pod
1145 copy ..\README.mpeix ..\pod\perlmpeix.pod
1146 copy ..\README.netware ..\pod\perlnetware.pod
1147 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1148 copy ..\README.os2 ..\pod\perlos2.pod
1149 copy ..\README.os390 ..\pod\perlos390.pod
1150 copy ..\README.os400 ..\pod\perlos400.pod
1151 copy ..\README.plan9 ..\pod\perlplan9.pod
1152 copy ..\README.qnx ..\pod\perlqnx.pod
1153 copy ..\README.riscos ..\pod\perlriscos.pod
1154 copy ..\README.solaris ..\pod\perlsolaris.pod
1155 copy ..\README.symbian ..\pod\perlsymbian.pod
1156 copy ..\README.tru64 ..\pod\perltru64.pod
1157 copy ..\README.tw ..\pod\perltw.pod
1158 copy ..\README.uts ..\pod\perluts.pod
1159 copy ..\README.vmesa ..\pod\perlvmesa.pod
1160 copy ..\README.vms ..\pod\perlvms.pod
1161 copy ..\README.vos ..\pod\perlvos.pod
1162 copy ..\README.win32 ..\pod\perlwin32.pod
1163 copy ..\pod\perl594delta.pod ..\pod\perldelta.pod
1164 $(MAKE) -f ..\win32\pod.mak converters
1166 $(PERLEXE) lib_pm.PL
1168 $(PERLEXE) $(PL2BAT) $(UTILS)
1170 # Note that the pod cleanup in this next section is parsed (and regenerated
1171 # by pod/buildtoc so please check that script before making changes here
1173 distclean: realclean
1174 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1175 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1177 -del /f $(EXTENSION_DLL)
1178 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1179 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1180 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1181 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1182 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1183 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1184 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1185 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1186 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1187 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1188 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1189 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1190 -del /f $(LIBDIR)\ByteLoader.pm
1191 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1192 -del /f $(LIBDIR)\Devel\PPPort.pm
1193 -del /f $(LIBDIR)\File\Glob.pm
1194 -del /f $(LIBDIR)\Storable.pm
1195 -del /f $(LIBDIR)\Digest\MD5.pm
1196 -del /f $(LIBDIR)\Digest\SHA.pm
1197 -del /f $(LIBDIR)\PerlIO\encoding.pm
1198 -del /f $(LIBDIR)\PerlIO\scalar.pm
1199 -del /f $(LIBDIR)\PerlIO\via.pm
1200 -del /f $(LIBDIR)\Sys\Hostname.pm
1201 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1202 -del /f $(LIBDIR)\threads\shared.pm
1203 -del /f $(LIBDIR)\Time\HiRes.pm
1204 -del /f $(LIBDIR)\Unicode\Normalize.pm
1205 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1206 -del /f $(LIBDIR)\Win32.pm
1207 -del /f $(LIBDIR)\Win32API\File.pm
1208 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1209 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1210 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1211 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1212 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1213 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1214 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1215 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1216 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1217 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1218 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1219 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1220 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1221 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1222 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1223 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1224 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1225 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1226 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1227 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1228 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1229 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1230 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1231 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1232 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1233 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1234 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1235 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1237 pod2html pod2latex pod2man pod2text pod2usage \
1238 podchecker podselect
1239 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1240 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1241 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1242 -cd ..\x2p && del /f find2perl s2p psed *.bat
1243 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1247 -del /f $(PERLEXE_ICO) perl.base
1248 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1249 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1250 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1251 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1252 -if exist pod2htmd.tmp del pod2htmd.tmp
1253 -if exist pod2htmi.tmp del pod2htmi.tmp
1254 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1256 install : all installbare installhtml
1259 $(PERLEXE) ..\installperl
1260 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1261 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1262 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1263 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1264 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1267 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1269 inst_lib : $(CONFIGPM)
1270 copy splittree.pl ..
1271 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1272 $(RCOPY) ..\lib $(INST_LIB)\*.*
1274 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1275 cd ..\lib\unicore && \
1276 ..\$(MINIPERL) -I.. mktables
1278 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1279 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1280 if exist ..\t\perl.exe del /f ..\t\perl.exe
1281 rename ..\t\miniperl.exe perl.exe
1282 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1285 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1287 test-prep : all utils
1288 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1289 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1290 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1294 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1297 test-notty : test-prep
1298 set PERL_SKIP_TTY_TEST=1
1300 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1304 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1305 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1306 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1308 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1312 -@$(DEL) miniperlmain$(o)
1313 -@$(DEL) $(MINIPERL)
1314 -@$(DEL) perlglob$(o)
1315 -@$(DEL) perlmain$(o)
1320 -@$(DEL) $(WPERLEXE)
1322 -@$(DEL) $(CORE_OBJ)
1323 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1324 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1325 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1326 -@$(DEL) $(UNIDATAFILES)
1327 -@$(DEL) $(WIN32_OBJ)
1330 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1331 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1332 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1335 -@$(DEL) Extensions_static
1337 clean : Extensions_clean _clean
1339 realclean : Extensions_realclean MakePPPort_clean _clean
1341 # Handy way to run perlbug -ok without having to install and run the
1342 # installed perlbug. We don't re-run the tests here - we trust the user.
1343 # Please *don't* use this unless all tests pass.
1344 # If you want to report test failures, use "nmake nok" instead.
1346 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1349 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1352 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1355 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok