2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools **experimental**
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment one of the following lines if you are using either
92 # Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
98 # uncomment next line if you want debug version of perl (big,slow)
99 # If not enabled, we automatically try to use maximum optimization
100 # with all compilers that are known to have a working optimizer.
105 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
106 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
107 # This currently requires VC 5.0 with Service Pack 3 or later.
108 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
109 # and follow the directions in the package to install.
111 # Not recommended if you have VC 6.x and you're not running Windows 9x.
113 #USE_PERLCRT = define
116 # uncomment to enable linking with setargv.obj under the Visual C
117 # compiler. Setting this options enables perl to expand wildcards in
118 # arguments, but it may be harder to use alternate methods like
119 # File::DosGlob that are more powerful. This option is supported only with
122 #USE_SETARGV = define
125 # if you want to have the crypt() builtin function implemented, leave this or
126 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
127 # version of des_fcrypt().
132 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
133 # library, uncomment this, and make sure the library exists (see README.win32)
134 # Specify the full pathname of the library.
136 #CRYPT_LIB = fcrypt.lib
139 # set this if you wish to use perl's malloc
140 # WARNING: Turning this on/off WILL break binary compatibility with extensions
141 # you may have compiled with/without it. Be prepared to recompile all
142 # extensions if you change the default. Currently, this cannot be enabled
143 # if you ask for USE_IMP_SYS above.
145 #PERL_MALLOC = define
148 # set this to enable debugging mstats
149 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
150 # be enabled without PERL_MALLOC as well.
152 #DEBUG_MSTATS = define
156 # set the install locations of the compiler include/libraries
157 # Running VCVARS32.BAT is *required* when using Visual C.
158 # Some versions of Visual C don't define MSVCDIR in the environment,
159 # so you may have to set CCHOME explicitly (spaces in the path name should
164 CCINCDIR = $(CCHOME)\include
165 CCLIBDIR = $(CCHOME)\lib
168 # Additional compiler flags can be specified here.
172 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
173 # internal hash function unless the PERL_HASH_SEED environment variable is set.
174 # Alternatively, adding -DNO_HASH_SEED will completely disable the
175 # randomization feature.
176 # The latter is required to maintain binary compatibility with Perl 5.8.0.
178 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
179 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
182 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
183 # for old symbols by default, at the expense of extreme pollution. You most
184 # probably just want to build modules that won't compile with
185 # perl Makefile.PL POLLUTE=1
186 # instead of enabling this. Please report such modules to the respective
189 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
192 # This should normally be disabled. Enabling it will disable the File::Glob
193 # implementation of CORE::glob.
195 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
198 # This should normally be disabled. Enabling it causes perl to read scripts
199 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
201 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
204 # specify semicolon-separated list of extra directories that modules will
205 # look for libraries (spaces in path names need not be quoted)
210 # set this to your email address (perl will guess a value from
211 # from your loginname and your hostname, which may not be right)
216 ## Build configuration ends.
219 ##################### CHANGE THESE ONLY IF YOU MUST #####################
221 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
225 CRYPT_FLAG = -DHAVE_DES_FCRYPT
228 !IF "$(USE_IMP_SYS)" == "define"
233 !IF "$(PERL_MALLOC)" == ""
238 !IF "$(DEBUG_MSTATS)" == ""
242 !IF "$(DEBUG_MSTATS)" == "define"
243 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
246 !IF "$(USE_SITECUST)" == ""
250 !IF "$(USE_MULTI)" == ""
254 !IF "$(USE_ITHREADS)" == ""
258 !IF "$(USE_IMP_SYS)" == ""
262 !IF "$(USE_PERLIO)" == ""
266 !IF "$(USE_LARGE_FILES)" == ""
267 USE_LARGE_FILES = undef
270 !IF "$(USE_PERLCRT)" == ""
274 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
278 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
282 !IF "$(USE_SITECUST)" == "define"
283 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
286 !IF "$(USE_MULTI)" != "undef"
287 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
290 !IF "$(USE_IMP_SYS)" != "undef"
291 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
294 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
295 PROCESSOR_ARCHITECTURE = x86
299 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
300 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
303 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
311 !IF "$(USE_MULTI)" == "define"
312 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
314 !IF "$(USE_PERLIO)" == "define"
315 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
317 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
321 !IF "$(USE_PERLIO)" == "define"
322 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
325 !IF "$(USE_ITHREADS)" == "define"
326 ARCHNAME = $(ARCHNAME)-thread
329 # Visual Studio 98 specific
330 !IF "$(CCTYPE)" == "MSVC60"
332 # VC 6.0 can load the socket dll on demand. Makes the test suite
333 # run in about 10% less time.
334 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
337 ARCHDIR = ..\lib\$(ARCHNAME)
338 COREDIR = ..\lib\CORE
339 AUTODIR = ..\lib\auto
343 EXTUTILSDIR = $(LIBDIR)\ExtUtils
346 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
347 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
348 INST_LIB = $(INST_TOP)$(INST_VER)\lib
349 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
350 INST_COREDIR = $(INST_ARCHLIB)\CORE
351 INST_POD = $(INST_LIB)\pod
352 INST_HTML = $(INST_TOP)$(INST_VER)\html
355 # Programs to compile, build .lib files and link
360 LIB32 = $(LINK32) -lib
367 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
368 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
369 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
370 LOCDEFS = -DPERLDLL -DPERL_CORE
374 !IF "$(USE_PERLCRT)" != "define"
380 !IF "$(CFG)" == "Debug"
381 ! IF "$(CCTYPE)" == "MSVC20"
382 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
384 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
388 OPTIMIZE = -MD -Zi -DNDEBUG
389 # we enable debug symbols in release builds also
390 LINK_DBG = -debug -opt:ref,icf
391 # you may want to enable this if you want COFF symbols in the executables
392 # in addition to the PDB symbols. The default Dr. Watson that ships with
393 # Windows can use the the former but not latter. The free WinDbg can be
394 # installed to get better stack traces from just the PDB symbols, so we
395 # avoid the bloat of COFF symbols by default.
396 #LINK_DBG = $(LINK_DBG) -debugtype:both
397 ! IF "$(WIN64)" == "define"
398 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
399 OPTIMIZE = $(OPTIMIZE) -Ox -GL
400 LINK_DBG = $(LINK_DBG) -ltcg
402 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
403 OPTIMIZE = $(OPTIMIZE) -O1
404 #OPTIMIZE = $(OPTIMIZE) -O2
408 !IF "$(WIN64)" == "define"
409 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
410 OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
413 !IF "$(USE_PERLCRT)" != "define"
414 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
417 LIBBASEFILES = $(CRYPT_LIB) \
418 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
419 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
420 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
423 # win64 doesn't have some libs
424 !IF "$(WIN64)" != "define"
425 LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
428 # we add LIBC here, since we may be using PerlCRT.dll
429 LIBFILES = $(LIBBASEFILES) $(LIBC)
431 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
432 $(PCHFLAGS) $(OPTIMIZE)
433 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
434 -libpath:"$(INST_COREDIR)" \
435 -machine:$(PROCESSOR_ARCHITECTURE)
439 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
441 #################### do not edit below this line #######################
442 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
450 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
453 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
459 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
460 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
468 # makedef.pl must be updated if this changes, and this should normally
469 # only change when there is an incompatible revision of the public API.
470 PERLIMPLIB = ..\perl59.lib
471 PERLDLL = ..\perl59.dll
473 MINIPERL = ..\miniperl.exe
475 PERLEXE = ..\perl.exe
476 WPERLEXE = ..\wperl.exe
477 GLOBEXE = ..\perlglob.exe
478 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
479 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
482 # Unicode data files generated by mktables
483 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
484 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
485 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
486 ..\lib\unicore\PVA.pl
488 # Directories of Unicode data files generated by mktables
489 UNIDATADIR1 = ..\lib\unicore\To
490 UNIDATADIR2 = ..\lib\unicore\lib
492 PERLEXE_ICO = .\perlexe.ico
493 PERLEXE_RES = .\perlexe.res
496 # Nominate a target which causes extensions to be re-built
497 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
498 # on and really only the interface - i.e. the .def file used to export symbols
500 PERLDEP = perldll.def
502 PL2BAT = bin\pl2bat.pl
503 GLOBBAT = bin\perlglob.bat
545 !IF "$(WIN64)" == "define"
546 CFGSH_TMPL = config.vc64
547 CFGH_TMPL = config_H.vc64
549 CFGSH_TMPL = config.vc
550 CFGH_TMPL = config_H.vc
553 XCOPY = xcopy /f /r /i /d
554 RCOPY = xcopy /f /r /i /e /d
561 # filenames given to xsubpp must have forward slashes (since it puts
562 # full pathnames in #line strings)
563 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
602 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
604 !IF "$(PERL_MALLOC)" == "define"
605 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
608 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
615 # We need this for miniperl build unless we override canned
616 # config.h #define building mini\*
617 #!IF "$(USE_PERLIO)" == "define"
618 WIN32_SRC = $(WIN32_SRC) .\win32io.c
621 !IF "$(CRYPT_SRC)" != ""
622 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
625 DLL_SRC = $(DYNALOADER).c
672 .\include\sys\socket.h \
675 CORE_H = $(CORE_NOCFG_H) .\config.h
677 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
678 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
679 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
680 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
681 $(MINIDIR)\miniperlmain$(o) \
682 $(MINIDIR)\perlio$(o)
683 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
684 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
685 DLL_OBJ = $(DLL_SRC:.c=.obj)
686 X2P_OBJ = $(X2P_SRC:.c=.obj)
688 PERLDLL_OBJ = $(CORE_OBJ)
689 PERLEXE_OBJ = perlmain$(o)
691 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
692 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
694 !IF "$(USE_SETARGV)" != ""
695 SETARGV_OBJ = setargv$(o)
698 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
699 SOCKET = $(EXTDIR)\Socket\Socket
700 FCNTL = $(EXTDIR)\Fcntl\Fcntl
701 OPCODE = $(EXTDIR)\Opcode\Opcode
702 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
704 POSIX = $(EXTDIR)\POSIX\POSIX
705 ATTRS = $(EXTDIR)\attrs\attrs
706 THREAD = $(EXTDIR)\Thread\Thread
709 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
710 ERRNO = $(EXTDIR)\Errno\Errno
711 PEEK = $(EXTDIR)\Devel\Peek\Peek
712 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
713 DPROF = $(EXTDIR)\Devel\DProf\DProf
714 GLOB = $(EXTDIR)\File\Glob\Glob
715 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
716 STORABLE = $(EXTDIR)\Storable\Storable
717 FILTER = $(EXTDIR)\Filter\Util\Call\Call
718 ENCODE = $(EXTDIR)\Encode\Encode
719 MD5 = $(EXTDIR)\Digest\MD5\MD5
720 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
721 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
722 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
723 CWD = $(EXTDIR)\Cwd\Cwd
724 LISTUTIL = $(EXTDIR)\List\Util\Util
725 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
726 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
727 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
728 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
729 WIN32_DIR = ext\Win32
731 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
732 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
733 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
734 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
735 IO_DLL = $(AUTODIR)\IO\IO.dll
736 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
737 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
738 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
739 B_DLL = $(AUTODIR)\B\B.dll
740 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
741 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
742 RE_DLL = $(AUTODIR)\re\re.dll
743 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
744 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
745 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
746 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
747 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
748 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
749 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
750 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
751 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
752 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
753 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
754 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
755 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
756 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
757 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
758 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
759 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
760 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
791 $(UNICODENORMALIZE).c \
815 $(PERLIOSCALAR_DLL) \
823 $(UNICODENORMALIZE_DLL) \
826 POD2HTML = $(PODDIR)\pod2html
827 POD2MAN = $(PODDIR)\pod2man
828 POD2LATEX = $(PODDIR)\pod2latex
829 POD2TEXT = $(PODDIR)\pod2text
832 "INST_DRV=$(INST_DRV)" \
833 "INST_TOP=$(INST_TOP)" \
834 "INST_VER=$(INST_VER)" \
835 "INST_ARCH=$(INST_ARCH)" \
836 "archname=$(ARCHNAME)" \
839 "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
840 "cf_email=$(EMAIL)" \
841 "d_crypt=$(D_CRYPT)" \
842 "d_mymalloc=$(PERL_MALLOC)" \
844 "incpath=$(CCINCDIR:"=\")" \
845 "libperl=$(PERLIMPLIB:..\=)" \
846 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
848 "make=$(MAKE_BARE)" \
849 "static_ext=$(STATIC_EXT)" \
850 "usethreads=$(USE_ITHREADS)" \
851 "useithreads=$(USE_ITHREADS)" \
852 "usemultiplicity=$(USE_MULTI)" \
853 "useperlio=$(USE_PERLIO)" \
854 "uselargefiles=$(USE_LARGE_FILES)" \
855 "usesitecustomize=$(USE_SITECUST)" \
856 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
857 "optimize=$(OPTIMIZE:"=\")"
863 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
865 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
867 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
869 #------------------------------------------------------------
871 $(GLOBEXE) : perlglob$(o)
872 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
873 perlglob$(o) setargv$(o)
875 perlglob$(o) : perlglob.c
877 config.w32 : $(CFGSH_TMPL)
878 copy $(CFGSH_TMPL) config.w32
880 .\config.h : $(CFGH_TMPL)
882 copy $(CFGH_TMPL) config.h
884 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
885 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
887 # this target is for when changes to the main config.sh happen
888 # edit config.{b,v,g}c and make this target once for each supported
889 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
891 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
893 -del /f perl.exe perl*.dll
898 -perl config_h.PL "INST_VER=$(INST_VER)"
899 rename config.h $(CFGH_TMPL)
901 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
905 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
906 $(XCOPY) ..\*.h $(COREDIR)\*.*
907 $(XCOPY) *.h $(COREDIR)\*.*
908 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
909 $(RCOPY) include $(COREDIR)\*.*
910 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
911 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
913 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
914 $(LINK32) -subsystem:console -out:$@ @<<
915 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
919 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
921 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
922 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
924 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
925 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
927 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
928 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
929 !IF "$(USE_IMP_SYS)" == "define"
930 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
931 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
934 # 1. we don't want to rebuild miniperl.exe when config.h changes
935 # 2. we don't want to rebuild miniperl.exe with non-default config.h
936 $(MINI_OBJ) : $(CORE_NOCFG_H)
938 $(WIN32_OBJ) : $(CORE_H)
939 $(CORE_OBJ) : $(CORE_H)
940 $(DLL_OBJ) : $(CORE_H)
941 $(X2P_OBJ) : $(CORE_H)
943 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
944 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
945 CCTYPE=$(CCTYPE) > perldll.def
947 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
948 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
949 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
951 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
953 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
954 $(MINIPERL) makeico.pl > $@
956 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
958 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
960 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
963 ..\x2p\a2p$(o) : ..\x2p\a2p.c
964 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
966 ..\x2p\hash$(o) : ..\x2p\hash.c
967 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
969 ..\x2p\str$(o) : ..\x2p\str.c
970 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
972 ..\x2p\util$(o) : ..\x2p\util.c
973 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
975 ..\x2p\walk$(o) : ..\x2p\walk.c
976 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
978 $(X2P) : $(MINIPERL) $(X2P_OBJ)
979 $(MINIPERL) ..\x2p\find2perl.PL
980 $(MINIPERL) ..\x2p\s2p.PL
981 $(LINK32) -subsystem:console -out:$@ @<<
982 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
985 perlmain.c : runperl.c
986 copy runperl.c perlmain.c
988 perlmain$(o) : perlmain.c
989 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
991 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
992 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
993 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
994 copy $(PERLEXE) $(WPERLEXE)
995 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
997 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
999 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1000 if not exist $(AUTODIR) mkdir $(AUTODIR)
1002 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1003 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1005 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1006 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1008 $(XSUBPP) dl_win32.xs > $(*B).c
1011 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1012 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1014 #----------------------------------------------------------------------------------
1015 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1016 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
1017 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext
1019 # Note: The next two targets explicitly remove a "blibdirs.exists" file that
1020 # currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
1023 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1024 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1025 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
1027 Extensions_realclean:
1028 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1029 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1030 -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
1032 #----------------------------------------------------------------------------------
1035 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1036 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1037 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1039 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1040 # so please check that script before making structural changes here
1042 utils: $(PERLEXE) $(X2P)
1044 $(MAKE) PERL=$(MINIPERL)
1046 copy ..\vms\perlvms.pod .\perlvms.pod
1047 copy ..\README.aix ..\pod\perlaix.pod
1048 copy ..\README.amiga ..\pod\perlamiga.pod
1049 copy ..\README.apollo ..\pod\perlapollo.pod
1050 copy ..\README.beos ..\pod\perlbeos.pod
1051 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1052 copy ..\README.ce ..\pod\perlce.pod
1053 copy ..\README.cn ..\pod\perlcn.pod
1054 copy ..\README.cygwin ..\pod\perlcygwin.pod
1055 copy ..\README.dgux ..\pod\perldgux.pod
1056 copy ..\README.dos ..\pod\perldos.pod
1057 copy ..\README.epoc ..\pod\perlepoc.pod
1058 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1059 copy ..\README.hpux ..\pod\perlhpux.pod
1060 copy ..\README.hurd ..\pod\perlhurd.pod
1061 copy ..\README.irix ..\pod\perlirix.pod
1062 copy ..\README.jp ..\pod\perljp.pod
1063 copy ..\README.ko ..\pod\perlko.pod
1064 copy ..\README.machten ..\pod\perlmachten.pod
1065 copy ..\README.macos ..\pod\perlmacos.pod
1066 copy ..\README.macosx ..\pod\perlmacosx.pod
1067 copy ..\README.mint ..\pod\perlmint.pod
1068 copy ..\README.mpeix ..\pod\perlmpeix.pod
1069 copy ..\README.netware ..\pod\perlnetware.pod
1070 copy ..\README.os2 ..\pod\perlos2.pod
1071 copy ..\README.os390 ..\pod\perlos390.pod
1072 copy ..\README.os400 ..\pod\perlos400.pod
1073 copy ..\README.plan9 ..\pod\perlplan9.pod
1074 copy ..\README.qnx ..\pod\perlqnx.pod
1075 copy ..\README.solaris ..\pod\perlsolaris.pod
1076 copy ..\README.tru64 ..\pod\perltru64.pod
1077 copy ..\README.tw ..\pod\perltw.pod
1078 copy ..\README.uts ..\pod\perluts.pod
1079 copy ..\README.vmesa ..\pod\perlvmesa.pod
1080 copy ..\README.vms ..\pod\perlvms.pod
1081 copy ..\README.vos ..\pod\perlvos.pod
1082 copy ..\README.win32 ..\pod\perlwin32.pod
1083 copy ..\pod\perl592delta.pod ..\pod\perldelta.pod
1084 $(MAKE) -f ..\win32\pod.mak converters
1086 $(PERLEXE) lib_pm.PL
1088 $(PERLEXE) $(PL2BAT) $(UTILS)
1090 # Note that the pod cleanup in this next section is parsed (and regenerated
1091 # by pod/buildtoc so please check that script before making changes here
1093 # the doubled rmdir calls are needed because older cmd shells
1094 # don't understand /q
1095 distclean: realclean
1096 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1097 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1099 -del /f $(EXTENSION_DLL)
1100 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1101 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1102 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1103 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1104 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1105 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1106 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1107 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1108 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1109 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1110 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1111 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1112 -del /f $(LIBDIR)\ByteLoader.pm
1113 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1114 -del /f $(LIBDIR)\Devel\PPPort.pm
1115 -del /f $(LIBDIR)\File\Glob.pm
1116 -del /f $(LIBDIR)\Storable.pm
1117 -del /f $(LIBDIR)\Digest\MD5.pm
1118 -del /f $(LIBDIR)\PerlIO\encoding.pm
1119 -del /f $(LIBDIR)\PerlIO\scalar.pm
1120 -del /f $(LIBDIR)\PerlIO\via.pm
1121 -del /f $(LIBDIR)\Sys\Hostname.pm
1122 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1123 -del /f $(LIBDIR)\threads\shared.pm
1124 -del /f $(LIBDIR)\Time\HiRes.pm
1125 -del /f $(LIBDIR)\Unicode\Normalize.pm
1126 -del /f $(LIBDIR)\Win32.pm
1127 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1128 -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
1129 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1130 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1131 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1132 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1133 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1134 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1135 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1136 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1137 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1138 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1139 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1140 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1141 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1142 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1143 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1144 -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
1145 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1146 -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
1147 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1148 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1149 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1150 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1151 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1152 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1153 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1154 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1155 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1156 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1157 perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
1158 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1160 pod2html pod2latex pod2man pod2text pod2usage \
1161 podchecker podselect
1162 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1163 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1164 xsubpp instmodsh prove corelist
1165 -cd ..\x2p && del /f find2perl s2p psed *.bat
1166 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1169 -del /f $(PERLEXE_ICO) perl.base
1170 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1171 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1172 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1173 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1174 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1175 -if exist $(COREDIR) rmdir /s $(COREDIR)
1177 install : all installbare installhtml
1180 $(PERLEXE) ..\installperl
1181 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1182 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1183 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1184 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1185 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1188 $(RCOPY) html\*.* $(INST_HTML)\*.*
1190 inst_lib : $(CONFIGPM)
1191 copy splittree.pl ..
1192 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1193 $(RCOPY) ..\lib $(INST_LIB)\*.*
1195 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1196 cd ..\lib\unicore && \
1197 ..\$(MINIPERL) -I.. mktables
1199 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1200 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1201 if exist ..\t\perl.exe del /f ..\t\perl.exe
1202 rename ..\t\miniperl.exe perl.exe
1203 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1206 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1208 test-prep : all utils
1209 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1210 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1211 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1215 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1218 test-notty : test-prep
1219 set PERL_SKIP_TTY_TEST=1
1221 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1225 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1226 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1227 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1229 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1232 # the doubled rmdir calls are needed because older cmd shells
1233 # don't understand /q
1235 -@$(DEL) miniperlmain$(o)
1236 -@$(DEL) $(MINIPERL)
1237 -@$(DEL) perlglob$(o)
1238 -@$(DEL) perlmain$(o)
1243 -@$(DEL) $(WPERLEXE)
1245 -@$(DEL) $(CORE_OBJ)
1246 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1247 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1248 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1249 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1250 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1251 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1252 -@$(DEL) $(UNIDATAFILES)
1253 -@$(DEL) $(WIN32_OBJ)
1256 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1257 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1258 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1262 clean : Extensions_clean _clean
1264 realclean : Extensions_realclean _clean
1266 # Handy way to run perlbug -ok without having to install and run the
1267 # installed perlbug. We don't re-run the tests here - we trust the user.
1268 # Please *don't* use this unless all tests pass.
1269 # If you want to report test failures, use "nmake nok" instead.
1271 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1274 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1277 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1280 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok