2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual C++ 98)
99 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
101 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
103 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
105 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # uncomment next line if you want debug version of perl (big,slow)
110 # If not enabled, we automatically try to use maximum optimization
111 # with all compilers that are known to have a working optimizer.
116 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
117 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
118 # This currently requires VC 5.0 with Service Pack 3 or later.
119 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
120 # and follow the directions in the package to install.
122 # Not recommended if you have VC 6.x and you're not running Windows 9x.
124 #USE_PERLCRT = define
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # if you want to have the crypt() builtin function implemented, leave this or
137 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
138 # version of des_fcrypt().
143 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
144 # library, uncomment this, and make sure the library exists (see README.win32)
145 # Specify the full pathname of the library.
147 #CRYPT_LIB = fcrypt.lib
150 # set this if you wish to use perl's malloc
151 # WARNING: Turning this on/off WILL break binary compatibility with extensions
152 # you may have compiled with/without it. Be prepared to recompile all
153 # extensions if you change the default. Currently, this cannot be enabled
154 # if you ask for USE_IMP_SYS above.
156 #PERL_MALLOC = define
159 # set this to enable debugging mstats
160 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
161 # be enabled without PERL_MALLOC as well.
163 #DEBUG_MSTATS = define
166 # set this to additionally provide a statically linked perl-static.exe.
167 # Note that dynamic loading will not work with this perl, so you must
168 # include required modules statically using STATIC_EXT variable below.
169 # A static library perl59s.lib will also be created.
170 # Ordinary perl.exe is not affected by this option.
172 #BUILD_STATIC = define
176 # set the install locations of the compiler include/libraries
177 # Running VCVARS32.BAT is *required* when using Visual C.
178 # Some versions of Visual C don't define MSVCDIR in the environment,
179 # so you may have to set CCHOME explicitly (spaces in the path name should
184 CCINCDIR = $(CCHOME)\include
185 CCLIBDIR = $(CCHOME)\lib
188 # Additional compiler flags can be specified here.
190 BUILDOPT = $(BUILDOPTEXTRA)
193 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
194 # internal hash function unless the PERL_HASH_SEED environment variable is set.
195 # Alternatively, adding -DNO_HASH_SEED will completely disable the
196 # randomization feature.
197 # The latter is required to maintain binary compatibility with Perl 5.8.0.
199 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
200 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
203 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
204 # for old symbols by default, at the expense of extreme pollution. You most
205 # probably just want to build modules that won't compile with
206 # perl Makefile.PL POLLUTE=1
207 # instead of enabling this. Please report such modules to the respective
210 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
213 # This should normally be disabled. Enabling it will disable the File::Glob
214 # implementation of CORE::glob.
216 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
219 # This should normally be disabled. Enabling it causes perl to read scripts
220 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
222 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
225 # specify semicolon-separated list of extra directories that modules will
226 # look for libraries (spaces in path names need not be quoted)
231 # set this to your email address (perl will guess a value from
232 # from your loginname and your hostname, which may not be right)
237 ## Build configuration ends.
240 ##################### CHANGE THESE ONLY IF YOU MUST #####################
242 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
246 CRYPT_FLAG = -DHAVE_DES_FCRYPT
249 !IF "$(USE_IMP_SYS)" == "define"
254 !IF "$(PERL_MALLOC)" == ""
259 !IF "$(DEBUG_MSTATS)" == ""
263 !IF "$(DEBUG_MSTATS)" == "define"
264 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
267 !IF "$(USE_SITECUST)" == ""
271 !IF "$(USE_MULTI)" == ""
275 !IF "$(USE_ITHREADS)" == ""
279 !IF "$(USE_IMP_SYS)" == ""
283 !IF "$(USE_PERLIO)" == ""
287 !IF "$(USE_LARGE_FILES)" == ""
288 USE_LARGE_FILES = undef
291 !IF "$(USE_PERLCRT)" == ""
295 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
299 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
303 !IF "$(USE_SITECUST)" == "define"
304 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
307 !IF "$(USE_MULTI)" != "undef"
308 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
311 !IF "$(USE_IMP_SYS)" != "undef"
312 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
315 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
316 PROCESSOR_ARCHITECTURE = x86
320 # When we are running from a 32bit cmd.exe on AMD64 then
321 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
323 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
324 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
327 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
335 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
336 !IF "$(ARCHITECTURE)" == "AMD64"
339 !IF "$(ARCHITECTURE)" == "IA64"
343 !IF "$(USE_MULTI)" == "define"
344 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
346 !IF "$(USE_PERLIO)" == "define"
347 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
349 ARCHNAME = MSWin32-$(ARCHITECTURE)
353 !IF "$(USE_PERLIO)" == "define"
354 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
357 !IF "$(USE_ITHREADS)" == "define"
358 ARCHNAME = $(ARCHNAME)-thread
361 # Visual C++ 98, .NET 2003 and 2005 specific.
362 # VC++ 6.x, 7.x and 8.x can load DLL's on demand. Makes the test suite run in
363 # about 10% less time. (The free version of 7.x can't do this, but the free
364 # version of 8.x can.)
365 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
366 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
367 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
370 # Visual C++ 2005 (VC++ 8.x) creates manifest files for EXEs and DLLs. These
371 # either need copying everywhere with the binaries, or else need embedding in
372 # them otherwise MSVCR80.dll won't be found. Embed them for simplicity, and
373 # delete them afterwards so that they don't get installed too.
374 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
375 EMBED_EXE_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
377 EMBED_DLL_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
381 ARCHDIR = ..\lib\$(ARCHNAME)
382 COREDIR = ..\lib\CORE
383 AUTODIR = ..\lib\auto
387 EXTUTILSDIR = $(LIBDIR)\ExtUtils
391 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
392 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
393 INST_LIB = $(INST_TOP)$(INST_VER)\lib
394 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
395 INST_COREDIR = $(INST_ARCHLIB)\CORE
396 INST_HTML = $(INST_TOP)$(INST_VER)\html
399 # Programs to compile, build .lib files and link
404 LIB32 = $(LINK32) -lib
411 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
412 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
413 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
414 LOCDEFS = -DPERLDLL -DPERL_CORE
418 !IF "$(USE_PERLCRT)" != "define"
424 !IF "$(CFG)" == "Debug"
425 ! IF "$(CCTYPE)" == "MSVC20"
426 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
428 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
432 OPTIMIZE = -MD -Zi -DNDEBUG
433 # we enable debug symbols in release builds also
434 LINK_DBG = -debug -opt:ref,icf
435 # you may want to enable this if you want COFF symbols in the executables
436 # in addition to the PDB symbols. The default Dr. Watson that ships with
437 # Windows can use the the former but not latter. The free WinDbg can be
438 # installed to get better stack traces from just the PDB symbols, so we
439 # avoid the bloat of COFF symbols by default.
440 #LINK_DBG = $(LINK_DBG) -debugtype:both
441 ! IF "$(WIN64)" == "define"
442 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
443 OPTIMIZE = $(OPTIMIZE) -Ox -GL
444 LINK_DBG = $(LINK_DBG) -ltcg
446 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
447 OPTIMIZE = $(OPTIMIZE) -O1
448 #OPTIMIZE = $(OPTIMIZE) -O2
452 !IF "$(WIN64)" == "define"
453 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
454 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
457 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
458 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
459 # do not require the fix.
460 !IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
461 ! IF "$(USE_PERLCRT)" != "define"
462 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
466 LIBBASEFILES = $(CRYPT_LIB) \
467 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
468 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
469 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
470 version.lib odbc32.lib odbccp32.lib
472 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
473 # include the buffer overrun verification code used by the /GS switch.
474 # Since the code links against libraries that are compiled with /GS, this
475 # "security cookie verification" must be included via bufferoverlow.lib.
476 !IF "$(WIN64)" == "define"
477 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
480 # we add LIBC here, since we may be using PerlCRT.dll
481 LIBFILES = $(LIBBASEFILES) $(LIBC)
483 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
484 EXTRACFLAGS = -nologo -GF -W3
485 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
486 $(PCHFLAGS) $(OPTIMIZE)
487 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
488 -libpath:"$(INST_COREDIR)" \
489 -machine:$(PROCESSOR_ARCHITECTURE)
494 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
496 #################### do not edit below this line #######################
497 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
505 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
508 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
514 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
515 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
525 # makedef.pl must be updated if this changes, and this should normally
526 # only change when there is an incompatible revision of the public API.
527 PERLIMPLIB = ..\perl59.lib
528 PERLSTATICLIB = ..\perl59s.lib
529 PERLDLL = ..\perl59.dll
531 MINIPERL = ..\miniperl.exe
533 PERLEXE = ..\perl.exe
534 WPERLEXE = ..\wperl.exe
535 PERLEXESTATIC = ..\perl-static.exe
536 GLOBEXE = ..\perlglob.exe
537 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
538 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
540 !IF "$(BUILD_STATIC)" == "define"
546 # Unicode data files generated by mktables
547 FIRSTUNIFILE = ..\lib\unicore\Canonical.pl
548 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
549 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
550 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
551 ..\lib\unicore\PVA.pl
553 # Directories of Unicode data files generated by mktables
554 UNIDATADIR1 = ..\lib\unicore\To
555 UNIDATADIR2 = ..\lib\unicore\lib
557 PERLEXE_ICO = .\perlexe.ico
558 PERLEXE_RES = .\perlexe.res
561 # Nominate a target which causes extensions to be re-built
562 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
563 # on and really only the interface - i.e. the .def file used to export symbols
565 PERLDEP = perldll.def
567 PL2BAT = bin\pl2bat.pl
568 GLOBBAT = bin\perlglob.bat
584 ..\utils\config_data \
613 !IF "$(WIN64)" == "define"
614 CFGSH_TMPL = config.vc64
615 CFGH_TMPL = config_H.vc64
617 CFGSH_TMPL = config.vc
618 CFGH_TMPL = config_H.vc
621 XCOPY = xcopy /f /r /i /d /y
622 RCOPY = xcopy /f /r /i /e /d /y
629 # filenames given to xsubpp must have forward slashes (since it puts
630 # full pathnames in #line strings)
631 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
671 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
673 !IF "$(PERL_MALLOC)" == "define"
674 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
677 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
684 # We need this for miniperl build unless we override canned
685 # config.h #define building mini\*
686 #!IF "$(USE_PERLIO)" == "define"
687 WIN32_SRC = $(WIN32_SRC) .\win32io.c
690 !IF "$(CRYPT_SRC)" != ""
691 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
694 DLL_SRC = $(DYNALOADER).c
741 .\include\sys\socket.h \
744 CORE_H = $(CORE_NOCFG_H) .\config.h
746 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
747 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
748 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
749 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
750 $(MINIDIR)\miniperlmain$(o) \
751 $(MINIDIR)\perlio$(o)
752 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
753 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
754 DLL_OBJ = $(DLL_SRC:.c=.obj)
755 X2P_OBJ = $(X2P_SRC:.c=.obj)
757 PERLDLL_OBJ = $(CORE_OBJ)
758 PERLEXE_OBJ = perlmain$(o)
759 PERLEXEST_OBJ = perlmainst$(o)
761 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
763 !IF "$(USE_SETARGV)" != ""
764 SETARGV_OBJ = setargv$(o)
767 # specify static extensions here
768 #STATIC_EXT = Cwd Compress/Raw/Zlib
771 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
772 SOCKET = $(EXTDIR)\Socket\Socket
773 FCNTL = $(EXTDIR)\Fcntl\Fcntl
774 OPCODE = $(EXTDIR)\Opcode\Opcode
775 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
777 POSIX = $(EXTDIR)\POSIX\POSIX
778 ATTRS = $(EXTDIR)\attrs\attrs
779 THREAD = $(EXTDIR)\Thread\Thread
782 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
783 ERRNO = $(EXTDIR)\Errno\Errno
784 PEEK = $(EXTDIR)\Devel\Peek\Peek
785 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
786 DPROF = $(EXTDIR)\Devel\DProf\DProf
787 GLOB = $(EXTDIR)\File\Glob\Glob
788 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
789 STORABLE = $(EXTDIR)\Storable\Storable
790 FILTER = $(EXTDIR)\Filter\Util\Call\Call
791 ENCODE = $(EXTDIR)\Encode\Encode
792 MD5 = $(EXTDIR)\Digest\MD5\MD5
793 SHA = $(EXTDIR)\Digest\SHA\SHA
794 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
795 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
796 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
797 CWD = $(EXTDIR)\Cwd\Cwd
798 LISTUTIL = $(EXTDIR)\List\Util\Util
799 HASHUTIL = $(EXTDIR)\Hash\Util\Util
800 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
801 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
802 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
803 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
804 MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
805 COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
806 WIN32_DIR = ext\Win32
807 WIN32APIFILE = ext\Win32API\File\File
809 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
810 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
811 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
812 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
813 IO_DLL = $(AUTODIR)\IO\IO.dll
814 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
815 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
816 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
817 B_DLL = $(AUTODIR)\B\B.dll
818 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
819 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
820 RE_DLL = $(AUTODIR)\re\re.dll
821 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
822 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
823 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
824 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
825 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
826 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
827 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
828 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
829 SHA_DLL = $(AUTODIR)\Digest\SHA\SHA.dll
830 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
831 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
832 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
833 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
834 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
835 HASHUTIL_DLL = $(AUTODIR)\HASH\Util\Util.dll
836 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
837 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
838 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
839 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
840 MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
841 COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
842 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
843 WIN32APIFILE_DLL = $(AUTODIR)\Win32API\File\File.dll
876 $(UNICODENORMALIZE).c \
877 $(MATHBIGINTFASTCALC).c \
904 $(PERLIOSCALAR_DLL) \
913 $(UNICODENORMALIZE_DLL) \
914 $(MATHBIGINTFASTCALC_DLL) \
915 $(COMPRESSZLIB_DLL) \
920 "INST_DRV=$(INST_DRV)" \
921 "INST_TOP=$(INST_TOP)" \
922 "INST_VER=$(INST_VER)" \
923 "INST_ARCH=$(INST_ARCH)" \
924 "archname=$(ARCHNAME)" \
927 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
928 "cf_email=$(EMAIL)" \
929 "d_crypt=$(D_CRYPT)" \
930 "d_mymalloc=$(PERL_MALLOC)" \
932 "incpath=$(CCINCDIR:"=\")" \
933 "libperl=$(PERLIMPLIB:..\=)" \
934 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
936 "make=$(MAKE_BARE)" \
937 "static_ext=$(STATIC_EXT)" \
938 "usethreads=$(USE_ITHREADS)" \
939 "useithreads=$(USE_ITHREADS)" \
940 "usemultiplicity=$(USE_MULTI)" \
941 "useperlio=$(USE_PERLIO)" \
942 "uselargefiles=$(USE_LARGE_FILES)" \
943 "usesitecustomize=$(USE_SITECUST)" \
944 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
945 "optimize=$(OPTIMIZE:"=\")"
951 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
952 $(X2P) MakePPPort Extensions $(PERLSTATIC)
953 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
955 ..\regnodes.h : ..\regcomp.sym
960 regnodes : ..\regnodes.h
962 reonly : regnodes .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
963 $(X2P) Extensions_reonly
964 @echo Perl and 're' are up to date.
966 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
968 static: $(PERLEXESTATIC)
970 #------------------------------------------------------------
972 $(GLOBEXE) : perlglob$(o)
973 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
974 perlglob$(o) setargv$(o)
977 perlglob$(o) : perlglob.c
979 config.w32 : $(CFGSH_TMPL)
980 copy $(CFGSH_TMPL) config.w32
982 .\config.h : $(CFGH_TMPL)
984 copy $(CFGH_TMPL) config.h
986 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
987 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
989 # this target is for when changes to the main config.sh happen
990 # edit config.{b,v,g}c and make this target once for each supported
991 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
993 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
995 -del /f perl.exe perl*.dll
1000 -perl config_h.PL "INST_VER=$(INST_VER)"
1001 rename config.h $(CFGH_TMPL)
1003 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1007 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1008 $(XCOPY) ..\*.h $(COREDIR)\*.*
1009 $(XCOPY) *.h $(COREDIR)\*.*
1010 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
1011 $(RCOPY) include $(COREDIR)\*.*
1012 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
1013 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
1015 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
1016 $(LINK32) -subsystem:console -out:$@ @<<
1017 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
1022 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1024 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1025 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
1027 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1028 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
1030 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1031 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1032 !IF "$(USE_IMP_SYS)" == "define"
1033 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1034 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1037 # 1. we don't want to rebuild miniperl.exe when config.h changes
1038 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1039 $(MINI_OBJ) : $(CORE_NOCFG_H)
1041 $(WIN32_OBJ) : $(CORE_H)
1042 $(CORE_OBJ) : $(CORE_H)
1043 $(DLL_OBJ) : $(CORE_H)
1044 $(X2P_OBJ) : $(CORE_H)
1046 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1047 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
1048 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
1049 CCTYPE=$(CCTYPE) > perldll.def
1051 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1052 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
1053 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
1056 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1058 $(PERLSTATICLIB): Extensions_static
1059 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
1062 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1064 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1065 $(MINIPERL) makeico.pl > $@
1067 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1069 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1071 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1074 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1075 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1077 ..\x2p\hash$(o) : ..\x2p\hash.c
1078 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1080 ..\x2p\str$(o) : ..\x2p\str.c
1081 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1083 ..\x2p\util$(o) : ..\x2p\util.c
1084 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1086 ..\x2p\walk$(o) : ..\x2p\walk.c
1087 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1089 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1090 $(MINIPERL) ..\x2p\find2perl.PL
1091 $(MINIPERL) ..\x2p\s2p.PL
1092 $(LINK32) -subsystem:console -out:$@ @<<
1093 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1097 perlmain.c : runperl.c
1098 copy runperl.c perlmain.c
1100 perlmain$(o) : perlmain.c
1101 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1103 perlmainst.c : runperl.c
1104 copy runperl.c perlmainst.c
1106 perlmainst$(o) : perlmainst.c
1107 $(CC) $(CFLAGS_O) -DPERLDLL $(OBJOUT_FLAG)$@ -c perlmainst.c
1109 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1110 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1111 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1113 copy $(PERLEXE) $(WPERLEXE)
1114 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1115 copy splittree.pl ..
1116 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1118 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1119 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1120 @Extensions_static $(PERLSTATICLIB) \
1121 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1124 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1125 if not exist $(AUTODIR) mkdir $(AUTODIR)
1127 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1128 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1130 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1131 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1133 $(XSUBPP) dl_win32.xs > $(*B).c
1136 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1137 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1139 MakePPPort: $(MINIPERL) $(CONFIGPM)
1140 $(MINIPERL) -I..\lib ..\mkppport
1143 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1145 #-------------------------------------------------------------------------------
1146 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1147 $(XCOPY) ..\*.h $(COREDIR)\*.*
1148 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1149 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1151 Extensions_reonly: buildext.pl $(PERLDEP) $(CONFIGPM)
1152 $(XCOPY) ..\*.h $(COREDIR)\*.*
1153 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1154 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1156 Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
1157 $(XCOPY) ..\*.h $(COREDIR)\*.*
1158 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1159 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1160 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1163 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1164 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1166 Extensions_realclean:
1167 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1168 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1170 #-------------------------------------------------------------------------------
1173 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1174 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1175 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1177 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1178 # so please check that script before making structural changes here
1180 utils: $(PERLEXE) $(X2P)
1182 $(MAKE) PERL=$(MINIPERL)
1184 copy ..\vms\perlvms.pod .\perlvms.pod
1185 copy ..\README.aix ..\pod\perlaix.pod
1186 copy ..\README.amiga ..\pod\perlamiga.pod
1187 copy ..\README.apollo ..\pod\perlapollo.pod
1188 copy ..\README.beos ..\pod\perlbeos.pod
1189 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1190 copy ..\README.ce ..\pod\perlce.pod
1191 copy ..\README.cn ..\pod\perlcn.pod
1192 copy ..\README.cygwin ..\pod\perlcygwin.pod
1193 copy ..\README.dgux ..\pod\perldgux.pod
1194 copy ..\README.dos ..\pod\perldos.pod
1195 copy ..\README.epoc ..\pod\perlepoc.pod
1196 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1197 copy ..\README.hpux ..\pod\perlhpux.pod
1198 copy ..\README.hurd ..\pod\perlhurd.pod
1199 copy ..\README.irix ..\pod\perlirix.pod
1200 copy ..\README.jp ..\pod\perljp.pod
1201 copy ..\README.ko ..\pod\perlko.pod
1202 copy ..\README.linux ..\pod\perllinux.pod
1203 copy ..\README.machten ..\pod\perlmachten.pod
1204 copy ..\README.macos ..\pod\perlmacos.pod
1205 copy ..\README.macosx ..\pod\perlmacosx.pod
1206 copy ..\README.mint ..\pod\perlmint.pod
1207 copy ..\README.mpeix ..\pod\perlmpeix.pod
1208 copy ..\README.netware ..\pod\perlnetware.pod
1209 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1210 copy ..\README.os2 ..\pod\perlos2.pod
1211 copy ..\README.os390 ..\pod\perlos390.pod
1212 copy ..\README.os400 ..\pod\perlos400.pod
1213 copy ..\README.plan9 ..\pod\perlplan9.pod
1214 copy ..\README.qnx ..\pod\perlqnx.pod
1215 copy ..\README.riscos ..\pod\perlriscos.pod
1216 copy ..\README.solaris ..\pod\perlsolaris.pod
1217 copy ..\README.symbian ..\pod\perlsymbian.pod
1218 copy ..\README.tru64 ..\pod\perltru64.pod
1219 copy ..\README.tw ..\pod\perltw.pod
1220 copy ..\README.uts ..\pod\perluts.pod
1221 copy ..\README.vmesa ..\pod\perlvmesa.pod
1222 copy ..\README.vms ..\pod\perlvms.pod
1223 copy ..\README.vos ..\pod\perlvos.pod
1224 copy ..\README.win32 ..\pod\perlwin32.pod
1225 copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
1226 $(MAKE) -f ..\win32\pod.mak converters
1228 $(PERLEXE) lib_pm.PL
1230 $(PERLEXE) $(PL2BAT) $(UTILS)
1232 # Note that the pod cleanup in this next section is parsed (and regenerated
1233 # by pod/buildtoc so please check that script before making changes here
1235 distclean: realclean
1236 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1237 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1238 $(PERLEXESTATIC) $(PERLSTATICLIB)
1240 -del /f $(EXTENSION_DLL)
1241 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1242 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1243 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1244 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1245 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1246 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1247 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1248 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1249 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1250 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1251 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1252 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1253 -del /f $(LIBDIR)\ByteLoader.pm
1254 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1255 -del /f $(LIBDIR)\Devel\PPPort.pm
1256 -del /f $(LIBDIR)\File\Glob.pm
1257 -del /f $(LIBDIR)\Storable.pm
1258 -del /f $(LIBDIR)\Digest\MD5.pm
1259 -del /f $(LIBDIR)\Digest\SHA.pm
1260 -del /f $(LIBDIR)\PerlIO\encoding.pm
1261 -del /f $(LIBDIR)\PerlIO\scalar.pm
1262 -del /f $(LIBDIR)\PerlIO\via.pm
1263 -del /f $(LIBDIR)\Sys\Hostname.pm
1264 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1265 -del /f $(LIBDIR)\threads\shared.pm
1266 -del /f $(LIBDIR)\Time\HiRes.pm
1267 -del /f $(LIBDIR)\Unicode\Normalize.pm
1268 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1269 -del /f $(LIBDIR)\Win32.pm
1270 -del /f $(LIBDIR)\Win32API\File.pm
1271 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1272 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1273 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1274 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1275 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1276 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1277 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1278 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1279 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1280 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1281 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1282 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1283 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1284 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1285 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1286 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1287 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1288 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1289 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1290 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1291 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1292 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1293 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1294 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1295 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1296 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1297 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1298 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1300 pod2html pod2latex pod2man pod2text pod2usage \
1301 podchecker podselect
1302 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1303 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1304 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1305 -cd ..\x2p && del /f find2perl s2p psed *.bat
1306 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1311 -del /f $(PERLEXE_ICO) perl.base
1312 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1313 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1314 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1315 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1316 -if exist pod2htmd.tmp del pod2htmd.tmp
1317 -if exist pod2htmi.tmp del pod2htmi.tmp
1318 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1320 install : all installbare installhtml
1323 $(PERLEXE) ..\installperl
1324 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1325 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1326 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1327 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1328 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1329 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1332 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1334 inst_lib : $(CONFIGPM)
1335 copy splittree.pl ..
1336 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1337 $(RCOPY) ..\lib $(INST_LIB)\*.*
1339 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1340 cd ..\lib\unicore && \
1341 ..\$(MINIPERL) -I.. mktables -check $@ $(FIRSTUNIFILE)
1343 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1344 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1345 if exist ..\t\perl.exe del /f ..\t\perl.exe
1346 rename ..\t\miniperl.exe perl.exe
1347 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1350 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1352 test-prep : all utils
1353 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1354 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1355 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1359 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1362 test-reonly : reonly utils
1363 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1364 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1365 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1367 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b $(EXTRA)
1375 test-notty : test-prep
1376 set PERL_SKIP_TTY_TEST=1
1378 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1382 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1383 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1384 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1386 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1390 -@$(DEL) miniperlmain$(o)
1391 -@$(DEL) $(MINIPERL)
1392 -@$(DEL) perlglob$(o)
1393 -@$(DEL) perlmain$(o)
1394 -@$(DEL) perlmainst$(o)
1399 -@$(DEL) $(WPERLEXE)
1400 -@$(DEL) $(PERLEXESTATIC)
1401 -@$(DEL) $(PERLSTATICLIB)
1403 -@$(DEL) $(CORE_OBJ)
1404 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1405 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1406 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1407 -@$(DEL) $(UNIDATAFILES)
1408 -@$(DEL) $(WIN32_OBJ)
1411 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1412 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1413 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1416 -@$(DEL) Extensions_static
1418 clean : Extensions_clean _clean
1420 realclean : Extensions_realclean MakePPPort_clean _clean
1422 # Handy way to run perlbug -ok without having to install and run the
1423 # installed perlbug. We don't re-run the tests here - we trust the user.
1424 # Please *don't* use this unless all tests pass.
1425 # If you want to report test failures, use "nmake nok" instead.
1427 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1430 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1433 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1436 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok